February 2010 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Feb 1 00:26:00 GMT 2010
Ending: Sun Feb 28 23:21:00 GMT 2010
Messages: 408

• New C++0x initializer_list/variadic template benchmark   Niels Dekker - address until 2010-10-10
• [RFH] A simple way to figure out the number of bits used by a long double   3dw4rd@verizon.net
• GCC freezing for a Multiply Chain   Balaji.Iyer@gtri.gatech.edu
• Your Fund Release!   African Development Bank
• Starting an OpenMP parallel section is extremely slow on a hyper-threaded Nehalem   Edwin Bennink
• Starting an OpenMP parallel section is extremely slow on a hyper-threaded Nehalem   Edwin Bennink
• Zero extractions and zero extends   Jean Christophe Beyler
• Register allocation and multi-reg HARD_FRAME_POINTER   Uros Bizjak
• Change x86 default arch for 4.5?   Uros Bizjak
• GCC freezing for a Multiply Chain   Ian Bolton
• Function versioning tests?   Ian Bolton
• Function versioning tests?   Ian Bolton
• Support for export keyword to use with C++ templates ?   Paolo Bonzini
• AC_CHECK_DECLS(basename) (Was: Re: Ping: patches required for --enable-build-with-cxx)   Paolo Bonzini
• Gcc 4.3.5, when?   Paolo Bonzini
• AC_CHECK_DECLS(basename) (Was: Re: Ping: patches required for --enable-build-with-cxx)   Paolo Bonzini
• AC_CHECK_DECLS(basename) (Was: Re: Ping: patches required for --enable-build-with-cxx)   Paolo Bonzini
• Change x86 default arch for 4.5?   Paolo Bonzini
• Change x86 default arch for 4.5?   Paolo Bonzini
• Change x86 default arch for 4.5?   Paolo Bonzini
• Defining a libgnat.so, libgnarl.so ABI   Paolo Bonzini
• Defining a libgnat.so, libgnarl.so ABI   Paolo Bonzini
• Change x86 default arch for 4.5?   Geert Bosch
• Change x86 default arch for 4.5?   Geert Bosch
• Change x86 default arch for 4.5?   Geert Bosch
• Change x86 default arch for 4.5?   Geert Bosch
• Change x86 default arch for 4.5?   Geert Bosch
• Change x86 default arch for 4.5?   Geert Bosch
• What's the policy for bug priorities, again   Steven Bosscher
• Change x86 default arch for 4.5?   Steven Bosscher
• Change x86 default arch for 4.5?   Steven Bosscher
• Change x86 default arch for 4.5?   Steven Bosscher
• Change x86 default arch for 4.5?   Steven Bosscher
• Change x86 default arch for 4.5?   Steven Bosscher
• Change x86 default arch for 4.5?   Steven Bosscher
• Overhead in C and C++   Steven Bosscher
• Change x86 default arch for 4.5?   Joe Buck
• Change x86 default arch for 4.5?   Joe Buck
• Change x86 default arch for 4.5?   Joe Buck
• Change x86 default arch for 4.5?   Joe Buck
• How to update my SSH authorized_keys on gcc.gnu.org?   Tobias Burnus
• How to get AST for C source in plugin?   Ilya Caramishev
• How to get AST for C source in plugin?   Ilya Caramishev
• Support for export keyword to use with C++ templates ?   Paolo Carlini
• Exception handling mechanism   Paolo Carlini
• Looking for an active mmix maintainer   Paolo Carlini
• [trans-mem] __sync_add_and_fetch_8 on ia32   Paolo Carlini
• [trans-mem] __sync_add_and_fetch_8 on ia32   Paolo Carlini
• Change x86 default arch for 4.5?   Paolo Carlini
• Change x86 default arch for 4.5?   Paolo Carlini
• [RFH] A simple way to figure out the number of bits used by a long double   Paolo Carlini
• [RFH] A simple way to figure out the number of bits used by a long double   Paolo Carlini
• [RFH] A simple way to figure out the number of bits used by a long double   Paolo Carlini
• [RFH] A simple way to figure out the number of bits used by a long double   Paolo Carlini
• [RFH] A simple way to figure out the number of bits used by a long double   Paolo Carlini
• [RFH] A simple way to figure out the number of bits used by a long double   Paolo Carlini
• [RFH] A simple way to figure out the number of bits used by a long double   Paolo Carlini
• [RFH] A simple way to figure out the number of bits used by a long double   Paolo Carlini
• [RFH] A simple way to figure out the number of bits used by a long double   Paolo Carlini
• [RFH] A simple way to figure out the number of bits used by a long double   Paolo Carlini
• [RFH] A simple way to figure out the number of bits used by a long double   Paolo Carlini
• [RFH] A simple way to figure out the number of bits used by a long double   Paolo Carlini
• [RFH] A simple way to figure out the number of bits used by a long double   Paolo Carlini
• Problem with stores and loads from unions and proposed fix   Martin Chaney
• Problem with stores and loads from unions and proposed fix   Martin Chaney
• Defining a libgnat.so, libgnarl.so ABI   Arnaud Charlet
• Defining a libgnat.so, libgnarl.so ABI   Arnaud Charlet
• Defining a libgnat.so, libgnarl.so ABI   Arnaud Charlet
• Parser extension points for plug-ins   Ludovic Courtès
• Parser extension points for plug-ins   Ludovic Courtès
• student internship & GCC   Ludovic Courtès
• Why auto variables NOT overlap on stack?   Ding Curie
• Why auto variables NOT overlap on stack?   Ding Curie
• Change x86 default arch for 4.5?   David Daney
• GCC freezing for a Multiply Chain   Dominique Dhumieres
• Change x86 default arch for 4.5?   Joel Dice
• MicroBlaze branch updated   Michael Eager
• Git mirror needs a run of "git gc"   Frank Ch. Eigler
• How to update my SSH authorized_keys on gcc.gnu.org?   Christopher Faylor
• a gcc plugin to show cfg graphically when debug gcc   Eric Fisher
• Gprof can account for less than 1/3 of execution time?!?!   Anthony Foiani
• Building GCC 4.3.3 for ARM.   Vincent Forbes
• Gprof can account for less than 1/3 of execution time?!?!   Axel Freyn
• C++ DR/354   Magnus Fromreide
• RTL question for I64   Nathan Froyd
• Gprof can account for less than 1/3 of execution time?!?!   Nathan Froyd
• C++: How does pthread_cancel() work?   Christian Fröbel
• Change x86 default arch for 4.5?   Laurent GUERBY
• Defining a libgnat.so, libgnarl.so ABI   Laurent GUERBY
• optimizing the pushing of constant parameters to functions   Daniel R. Grayson
• [GRAPHITE] Re: Loop Transformations Question   Tobias Grosser
• Problem with stores and loads from unions and proposed fix   Richard Guenther
• [GRAPHITE] Re: Loop Transformations Question   Richard Guenther
• Are pointers to be supposed to be sign or zero extended to wider integers?   Richard Guenther
• gcc -O1 performs better than gcc -O2   Richard Guenther
• gcc -O1 performs better than gcc -O2   Richard Guenther
• Gcc 4.3.5, when?   Richard Guenther
• What's the policy for bug priorities, again   Richard Guenther
• Segfault inserting a pass   Richard Guenther
• What's the policy for bug priorities, again   Richard Guenther
• Adding a statement to statement list before pass_cfg_build   Richard Guenther
• gcc 4.4.1/linux 64bit: code crashes with -O3, works with -O2   Richard Guenther
• Change x86 default arch for 4.5?   Richard Guenther
• Change x86 default arch for 4.5?   Richard Guenther
• Change x86 default arch for 4.5?   Richard Guenther
• Change x86 default arch for 4.5?   Richard Guenther
• is -fno-toplevel-reorder going to deprecate   Richard Guenther
• PR 42485 Delete both -b and -V options   Richard Guenther
• a gcc plugin to show cfg graphically when debug gcc   Richard Guenther
• branches within C++ destructors   Rohit Gupta
• Are pointers to be supposed to be sign or zero extended to wider integers?   Martin Guy
• Change x86 default arch for 4.5?   Martin Guy
• Change x86 default arch for 4.5?   Martin Guy
• Change x86 default arch for 4.5?   Martin Guy
• Change x86 default arch for 4.5?   Martin Guy
• Change x86 default arch for 4.5?   Martin Guy
• parse tree   Andrew Haley
• Change x86 default arch for 4.5?   Andrew Haley
• Change x86 default arch for 4.5?   Andrew Haley
• [PR] Now That's What I Call Fashion - February 2010   Vivienne - OK Hello
• [trans-mem] ipa tm pass and dominator walks   Richard Henderson
• [trans-mem] ipa tm pass and dominator walks   Richard Henderson
• powerpc-eabi-gcc no implicit FPU usage   Kai Henningsen
• Support for export keyword to use with C++ templates ?   Kai Henningsen
• [trans-mem] ipa tm pass and dominator walks   Aldy Hernandez
• [trans-mem] ipa tm pass and dominator walks   Aldy Hernandez
• [trans-mem] merge from trunk @ 156607   Aldy Hernandez
• [trans-mem] __sync_add_and_fetch_8 on ia32   Aldy Hernandez
• porting GCC to a micro with a very limited addressing mode --- success with LEGITIMATE / LEGITIMIZE_ADDRESS, stuck with ICE !   Michael Hope
• gen_lowpart called where 'truncate' needed?   Mat Hostetter
• gen_lowpart called where 'truncate' needed?   Mat Hostetter
• gen_lowpart called where 'truncate' needed?   Mat Hostetter
• Exception handling information in the macintosh   Jack Howarth
• Exception handling information in the macintosh   Jack Howarth
• aliases without a _DECL?   Jan Hubicka
• aliases without a _DECL?   Jan Hubicka
• GCC calling GNU assembler   Nikola Ikonic
• _cpp_line_note structure in front end   Nikola Ikonic
• Possible bug in GCC front end   Nikola Ikonic
• Memo: Coca cola email notification (REF NO: LT/7914290166/CTV, BATCH: LM/51390-0/WGP).   Coca cola in collaboration with Cyberworld International Inc.
• insn length attribute and code size optimization   Daniel Jacobowitz
• insn length attribute and code size optimization   Daniel Jacobowitz
• Gprof can account for less than 1/3 of execution time?!?!   Daniel Jacobowitz
• [RFH] A simple way to figure out the number of bits used by a long double   Daniel Jacobowitz
• Greetings With Love,   Miss Jameela.
• Are pointers to be supposed to be sign or zero extended to wider integers?   Jakub Jelinek
• gcc -O1 performs better than gcc -O2   Jakub Jelinek
• gcc 4.4.1/linux 64bit: code crashes with -O3, works with -O2   Janis Johnson
• gcc 4.4.1/linux 64bit: code crashes with -O3, works with -O2   Janis Johnson
• Long paths with ../../../../ throughout   Jon
• Long paths with ../../../../ throughout   Jon
• Long paths with ../../../../ throughout   Jon
• Long paths with ../../../../ throughout   Jon
• Long paths with ../../../../ throughout   Jon
• Long paths with ../../../../ throughout   Jon
• Support for export keyword to use with C++ templates ?   Richard Kenner
• Support for export keyword to use with C++ templates ?   Richard Kenner
• Support for export keyword to use with C++ templates ?   Richard Kenner
• RTX costs   Richard Kenner
• Failure to combine SHIFT with ZERO_EXTEND   Rahul Kharche
• Failure to combine SHIFT with ZERO_EXTEND   Rahul Kharche
• help splitting instruction with two memory operands   King, Steven R
• PR 42485 Delete both -b and -V options   Matthias Klose
• Overhead in C and C++   Paul Koning
• Exception handling information in the macintosh   Dave Korn
• porting GCC to a micro with a very limited addressing mode --- enforcing a 'register indirect memory operand' through a constraint in md   Dave Korn
• Exception handling mechanism   Dave Korn
• Problem in printf float values in range (-1 < value < 1)   Dave Korn
• What's the policy for bug priorities, again   Dave Korn
• No integral promotions when calling library function?   Dave Korn
• Change x86 default arch for 4.5?   Dave Korn
• Change x86 default arch for 4.5?   Dave Korn
• Change x86 default arch for 4.5?   Dave Korn
• Change x86 default arch for 4.5?   Dave Korn
• Change x86 default arch for 4.5?   Dave Korn
• Change x86 default arch for 4.5?   Dave Korn
• Gprof can account for less than 1/3 of execution time?!?!   Dave Korn
• Change x86 default arch for 4.5?   Dave Korn
• Change x86 default arch for 4.5?   Dave Korn
• Register Allocation Pref. in 3.3.3   Dave Korn
• [RFH] A simple way to figure out the number of bits used by a long double   Dave Korn
• [RFH] A simple way to figure out the number of bits used by a long double   Dave Korn
• Inserting instrument calls before and after a function   Saleel Kudchadker
• Segfault inserting a pass   Saleel Kudchadker
• Adding a statement to statement list before pass_cfg_build   Saleel Kudchadker
• Adding a statement to statement list before pass_cfg_build   Saleel Kudchadker
• Question about IRA (setup_allocno_priorities)   Jeff Law
• Unwanted IRA copies via process_reg_shuffles   Jeff Law
• Failure to combine SHIFT with ZERO_EXTEND   Jeff Law
• Questions about compute_transpout in gcse.c code hoisting implementation   Jeff Law
• Change x86 default arch for 4.5?   Vincent Lefevre
• Change x86 default arch for 4.5?   Vincent Lefevre
• Change x86 default arch for 4.5?   Vincent Lefevre
• Change x86 default arch for 4.5?   Vincent Lefevre
• trunk's genmodes crashes on Ubuntu/Lucid (alpha2 snapshot) not on Debian/Sid [both AMD64 architecture]   H.J. Lu
• The Linux binutils 2.20.51.0.6 is released   H.J. Lu
• Change x86 default arch for 4.5?   H.J. Lu
• Change x86 default arch for 4.5?   H.J. Lu
• Change x86 default arch for 4.5?   H.J. Lu
• Change x86 default arch for 4.5?   H.J. Lu
• Change x86 default arch for 4.5?   H.J. Lu
• How to update my SSH authorized_keys on gcc.gnu.org?   H.J. Lu
• How to update my SSH authorized_keys on gcc.gnu.org?   H.J. Lu
• How to update my SSH authorized_keys on gcc.gnu.org?   H.J. Lu
• How to update my SSH authorized_keys on gcc.gnu.org?   H.J. Lu
• Change x86 default arch for 4.5?   H.J. Lu
• PR 42485 Delete both -b and -V options   Manuel López-Ibáñez
• Support for export keyword to use with C++ templates ?   Timothy Madden
• Support for export keyword to use with C++ templates ?   Timothy Madden
• Support for export keyword to use with C++ templates ?   Timothy Madden
• Support for export keyword to use with C++ templates ?   Timothy Madden
• Unwanted IRA copies via process_reg_shuffles   Vladimir Makarov
• [GRAPHITE] Re: Loop Transformations Question   Cristianno Martins
• [GRAPHITE] Re: Loop Transformations Question   Cristianno Martins
• Conditional clobbering   Paulo Matos
• RTX costs   Paulo J. Matos
• RTX costs   Paulo J. Matos
• Gcc 4.3.5, when?   Paulo J. Matos
• Register Allocation Pref. in 3.3.3   Paulo J. Matos
• Register Allocation Pref. in 3.3.3   Paulo J. Matos
• Conditional clobbering   Paulo J. Matos
• Register Allocation Pref. in 3.3.3   Paulo J. Matos
• trunk's genmodes crashes on Ubuntu/Lucid (alpha2 snapshot) not on Debian/Sid [both AMD64 architecture]   Justin P. Mattock
• Problem with stores and loads from unions and proposed fix   Michael Matz
• Gprof can account for less than 1/3 of execution time?!?!   Michael Matz
• Register Allocation Pref. in 3.3.3   Michael Matz
• Gprof can account for less than 1/3 of execution time?!?!   Maucci, Cyrille
• Gprof can account for less than 1/3 of execution time?!?!   Maucci, Cyrille
• GCC calling GNU assembler   Bingfeng Mei
• Function versioning tests?   Bingfeng Mei
• aliases without a _DECL?   Jason Merrill
• aliases without a _DECL?   Jason Merrill
• Change x86 default arch for 4.5?   Jason Merrill
• Change x86 default arch for 4.5?   Jason Merrill
• Change x86 default arch for 4.5?   Jason Merrill
• Change x86 default arch for 4.5?   Jason Merrill
• An information about GIMPLE   Ugo Mezzogori
• What's the policy for bug priorities, again   Mark Mitchell
• GCC 4.5 Status Report (2010-02-21)   Mark Mitchell
• Gprof can account for less than 1/3 of execution time?!?!   Alan Modra
• Change x86 default arch for 4.5?   Toon Moene
• Modulo Scheduling   Alexander Monakov
• Problems with `Installing GCC'   Joseph S. Myers
• Change x86 default arch for 4.5?   Joseph S. Myers
• Long paths with ../../../../ throughout   Joseph S. Myers
• Change x86 default arch for 4.5?   Joseph S. Myers
• Change x86 default arch for 4.5?   Joseph S. Myers
• Change x86 default arch for 4.5?   Joseph S. Myers
• Change x86 default arch for 4.5?   Joseph S. Myers
• Change x86 default arch for 4.5?   Joseph S. Myers
• insn length attribute and code size optimization   Quentin Neill
• GCC-How does the coding style affect the insv pattern recognization?   Adam Nemet
• gen_lowpart called where 'truncate' needed?   Adam Nemet
• gen_lowpart called where 'truncate' needed?   Adam Nemet
• Zero extractions and zero extends   Adam Nemet
• Dumping CPP symbol table stats   Victor Norman
• Contributing   Diego Novillo
• subscrite   Diego Novillo
• Obsoleting IRIX < 6.5, Solaris 7, and Tru64 UNIX < V5.1   Rainer Orth
• Problems with `Installing GCC'   Rainer Orth
• Defining a libffi.so.4 ABI   Rainer Orth
• Defining a libobjc.so.2 ABI   Rainer Orth
• Defining a libgnat.so, libgnarl.so ABI   Rainer Orth
• Common handling of Sun/GNU symbol versioning   Rainer Orth
• Modulo Scheduling   Cameron Lowell Palmer
• Looking To Purchase - Networking and Telephony   Chris james Perry
• Why auto variables NOT overlap on stack?   Gerald Pfeifer
• Jie Zhang appointed bfin maintainer   Gerald Pfeifer
• suggestion to use lzma for snapshots, maybe more?   Gerald Pfeifer
• Change x86 default arch for 4.5?   Gerald Pfeifer
• Why auto variables NOT overlap on stack?   Andrew Pinski
• Simple question/help request on emit_move_insn.   Andrew Pinski
• gcc 4.4.1/linux 64bit: code crashes with -O3, works with -O2   Andrew Pinski
• c++ compile error   Andrew Pinski
• Re: Gcc plugin: error: ‘LAST_AND_UNUSED_RTX_CODE’ undeclared   Andrew Pinski
• Re: Gcc plugin: error: ‘LAST_AND_UNUSED_RTX_CODE’ undeclared   Andrew Pinski
• optimizing the pushing of constant parameters to functions   Andrew Pinski
• [GRAPHITE] Re: Loop Transformations Question   Sebastian Pop
• Support for export keyword to use with C++ templates ?   Tim Prince
• Starting an OpenMP parallel section is extremely slow on a hyper-threaded Nehalem   Tim Prince
• Change x86 default arch for 4.5?   Tim Prince
• [RFH] A simple way to figure out the number of bits used by a long double   Tim Prince
• [C++-0x] Status of constexpr   Gabriel Dos Reis
• AC_CHECK_DECLS(basename) (Was: Re: Ping: patches required for --enable-build-with-cxx)   Joern Rennecke
• AC_CHECK_DECLS(basename) (Was: Re: Ping: patches required for --enable-build-with-cxx)   Joern Rennecke
• RTX costs   Joern Rennecke
• How to get AST for C source in plugin?   Joern Rennecke
• AC_CHECK_DECLS(basename) (Was: Re: Ping: patches required for --enable-build-with-cxx)   Joern Rennecke
• AC_CHECK_DECLS(basename) (Was: Re: Ping: patches required for --enable-build-with-cxx)   Joern Rennecke
• AC_CHECK_DECLS(basename) (Was: Re: Ping: patches required for --enable-build-with-cxx)   Joern Rennecke
• Register Allocation Pref. in 3.3.3   Joern Rennecke
• Gprof can account for less than 1/3 of execution time?!?!   Joern Rennecke
• Hunting backend bugs   Joern Rennecke
• Conditional clobbering   Joern Rennecke
• Conditional clobbering   Joern Rennecke
• gcc -O1 performs better than gcc -O2   Bernd Roesch
• porting GCC to a micro with a very limited addressing mode --- success with LEGITIMATE / LEGITIMIZE_ADDRESS, stuck with ICE !   Sergio Ruocco
• porting GCC to a micro with a very limited addressing mode --- enforcing a 'register indirect memory operand' through a constraint in md   Sergio Ruocco
• porting GCC to a micro with a very limited addressing mode --- enforcing a 'register indirect memory operand' through a constraint in md   Sergio Ruocco
• gcc 4.4.1/linux 64bit: code crashes with -O3, works with -O2   Christoph Rupp
• gcc 4.4.1/linux 64bit: code crashes with -O3, works with -O2   Christoph Rupp
• RTL question for I64   Douglas B Rupp
• Simple question/help request on emit_move_insn.   Douglas B Rupp
• Problem in printf float values in range (-1 < value < 1)   Naveen H. S
• trunk's genmodes crashes on Ubuntu/Lucid (alpha2 snapshot) not on Debian/Sid [both AMD64 architecture]   Basile STARYNKEVITCH
• trunk's genmodes crashes on Ubuntu/Lucid (alpha2 snapshot) not on Debian/Sid [both AMD64 architecture]   Basile STARYNKEVITCH
• ping - plugin directory   Basile STARYNKEVITCH
• GCC freezing for a Multiply Chain   Basile STARYNKEVITCH
• Why auto variables NOT overlap on stack?   Alexey Salmin
• insn length attribute and code size optimization   Richard Sandiford
• Gprof can account for less than 1/3 of execution time?!?!   Andreas Schwab
• How to update my SSH authorized_keys on gcc.gnu.org?   Andreas Schwab
• Defining a libobjc.so.2 ABI   Andreas Schwab
• [RFH] A simple way to figure out the number of bits used by a long double   Andreas Schwab
• [RFH] A simple way to figure out the number of bits used by a long double   Andreas Schwab
• [RFH] A simple way to figure out the number of bits used by a long double   Andreas Schwab
• [RFH] A simple way to figure out the number of bits used by a long double   Andreas Schwab
• [RFH] A simple way to figure out the number of bits used by a long double   Andreas Schwab
• [RFH] A simple way to figure out the number of bits used by a long double   Andreas Schwab
• [RFH] A simple way to figure out the number of bits used by a long double   Andreas Schwab
• [RFH] A simple way to figure out the number of bits used by a long double   Andreas Schwab
• [RFH] A simple way to figure out the number of bits used by a long double   Andreas Schwab
• Inserting instrument calls before and after a function   Harald Servat
• how to identify a part of a multi-word register   Mohamed Shafi
• subscrite   Elijah Simonov
• [C++-0x] Status of constexpr   Ed Smith-Rowland
• [RFH] A simple way to figure out the number of bits used by a long double   Ed Smith-Rowland
• [RFH] A simple way to figure out the number of bits used by a long double   Ed Smith-Rowland
• student internship & GCC   Basile Starynkevitch
• Exception handling mechanism   Xiaolong Tang
• Support for export keyword to use with C++ templates ?   Ian Lance Taylor
• An information about GIMPLE   Ian Lance Taylor
• Problems with `Installing GCC'   Ian Lance Taylor
• Long paths with ../../../../ throughout   Ian Lance Taylor
• insn length attribute and code size optimization   Ian Lance Taylor
• Long paths with ../../../../ throughout   Ian Lance Taylor
• gen_lowpart called where 'truncate' needed?   Ian Lance Taylor
• Support for export keyword to use with C++ templates ?   Ian Lance Taylor
• _cpp_line_note structure in front end   Ian Lance Taylor
• Linkage order in Linux   Ian Lance Taylor
• Long paths with ../../../../ throughout   Ian Lance Taylor
• is -fno-toplevel-reorder going to deprecate   Ian Lance Taylor
• is -fno-toplevel-reorder going to deprecate   Ian Lance Taylor
• Dumping CPP symbol table stats   Ian Lance Taylor
• [RFH] A simple way to figure out the number of bits used by a long double   Ian Lance Taylor
• gcc -O1 performs better than gcc -O2   Joakim Tjernlund
• gcc -O1 performs better than gcc -O2   Joakim Tjernlund
• gcc -O1 performs better than gcc -O2   Joakim Tjernlund
• Dumping CPP symbol table stats   Tom Tromey
• Parallelization of tokenizer in GCC!!!   Tom Tromey
• Change x86 default arch for 4.5?   Erik Trulsson
• Change x86 default arch for 4.5?   Erik Trulsson
• Change x86 default arch for 4.5?   Erik Trulsson
• Change x86 default arch for 4.5?   Erik Trulsson
• Change x86 default arch for 4.5?   Erik Trulsson
• Change x86 default arch for 4.5?   Erik Trulsson
• Gprof can account for less than 1/3 of execution time?!?!   Jon Turner
• Gprof can account for less than 1/3 of execution time?!?!   Jon Turner
• Gprof can account for less than 1/3 of execution time?!?!   Jon Turner
• Gprof can account for less than 1/3 of execution time?!?!   Jon Turner
• Gprof can account for less than 1/3 of execution time?!?!   Jon Turner
• Gprof can account for less than 1/3 of execution time?!?!   Jon Turner
• Bugzilla and setting priorities   Jonathan Wakely
• C++: How does pthread_cancel() work?   Jonathan Wakely
• Change x86 default arch for 4.5?   Florian Weimer
• Defining a libgnat.so, libgnarl.so ABI   Florian Weimer
• AC_CHECK_DECLS(basename) (Was: Re: Ping: patches required for --enable-build-with-cxx)   Ralf Wildenhues
• Support for export keyword to use with C++ templates ?   Michael Witten
• If/When will GCC accept a compiler options file?   Anthony Wong
• If/When will GCC accept a compiler options file? -- please ignore, my mistake   Anthony Wong
• What's the policy for bug priorities, again   Piotr Wyderski
• Change x86 default arch for 4.5?   Piotr Wyderski
• is -fno-toplevel-reorder going to deprecate   Sergey Yakoushkin
• is -fno-toplevel-reorder going to deprecate   Sergey Yakoushkin
• Jie Zhang appointed bfin maintainer   Jie Zhang
• No integral promotions when calling library function?   Jie Zhang
• No integral promotions when calling library function?   Jie Zhang
• Idea for Google Summer Code : C Compiler for EFI Byte Code implement in gcc   b95705030@ntu.edu.tw
• Overhead in C and C++   cmauchle@hsr.ch
• parse tree   dib.coolguy@gmail.com
• Заставь власть служить народу!   dmitiy.obuhov@gmail.com
• Власть должна отвечать перед народом!   dmitiy.obuhov@gmail.com
• Generating store after fdivd: how to avoid delay slot   k e
• Help-The possible places where insn is splitted in greg pass   fanqifei
• insn length attribute and code size optimization   fanqifei
• gcc-4.4-20100202 is now available   gccadmin@gcc.gnu.org
• gcc-4.5-20100204 is now available   gccadmin@gcc.gnu.org
• gcc-4.3-20100207 is now available   gccadmin@gcc.gnu.org
• gcc-4.4-20100209 is now available   gccadmin@gcc.gnu.org
• gcc-4.5-20100211 is now available   gccadmin@gcc.gnu.org
• gcc-4.3-20100214 is now available   gccadmin@gcc.gnu.org
• gcc-4.4-20100216 is now available   gccadmin@gcc.gnu.org
• gcc-4.5-20100218 is now available   gccadmin@gcc.gnu.org
• gcc-4.3-20100221 is now available   gccadmin@gcc.gnu.org
• gcc-4.4-20100223 is now available   gccadmin@gcc.gnu.org
• gcc-4.5-20100225 is now available   gccadmin@gcc.gnu.org
• Gcc plugin: error: ‘LAST_AND_UNUSED_RTX_CODE’ undeclared   ashish jain
• Re: Gcc plugin: error: ‘LAST_AND_UNUSED_RTX_CODE’ undeclared   ashish jain
• Linkage order in Linux   michael kapelko
• Contributing   krishna kishore
• c++ compile error   lists.gcc@codenamezero.org
• Working Part Time   maria8791maria8791@gmail.com
• Exception handling information in the macintosh   jacob navia
• Exception handling information in the macintosh   jacob navia
• Exception handling information in the macintosh   jacob navia
• Hunting backend bugs   garbett peter
• gcc -O1 performs better than gcc -O2   sam tygier
• Parallelization of tokenizer in GCC!!!   vivhari@gmail.com

Last message date: Sun Feb 28 23:21:00 GMT 2010
Archived on: Sat May 2 13:43:56 GMT 2020

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...