[M16C-ELF] : Problem with double and float data types.

[DJ Delorie]

> I have observed the following behavior while using "float" and
> "double" data types for m16c target. Any computation involving a
> "float" or a "double" data type does not work on the m16c hardware.
> However, the correct values can be observed using GDB simulator.

I figured out what the root cause of this is.  The SHL.L opcode (32
bit shift) has a maximum shift count of 16:

* If src is a register and you selected (.W) or (.L) for the size
  specifier (.size), the number of shifts is -16 to +16. Although you
  can set 0, no bits are shifted and no flags are changed. If you set
  a value less than -16 or greater than +16, the result of shift
  is indeterminate.

Indeed, the chip masks the shift count by 0x1f (it's signed) so a
shift by (say) 23 ends up shifting by 7 instead.  Hmmm, that would
imply a count range of -16..15, not -16..16.  I'll have to experiment
and find out for sure.  The simulator doesn't mask the count.

Do any other chips have a shift opcode which cannot shift by the max
size of the operand?  Does gcc know how to deal with this?

Note: the m32c chips don't have this limitation.  The m16c is a 16 bit
chip.