GCC build of HEAD failed for native with your patch on 2004-08-18T17:15:01Z.

GCC regression checker geoffk@apple.com
Wed Aug 18 17:22:00 GMT 2004


With your recent patch, GCC HEAD does not compile on:
 native
Attached is build output for those targets.

The last time the regression tests were run, GCC did not compile either,
so the problem might not be caused by your patch.

For more information, see http://gcc.gnu.org/regtest/.

-------------- next part --------------
ChangeLog entries since last run on 2004-08-18T16:45:32Z:
--- /Users/regress/tbox/changelog_mail/gcc/gcc/ChangeLog	Wed Aug 18 09:46:28 2004
+++ gcc/gcc/ChangeLog	Wed Aug 18 10:15:58 2004
@@ -1,5 +1,20 @@
 2004-08-18  Zack Weinberg  <zack@codesourcery.com>
 
+	* rtl.def (NIL): Delete.
+	* read-rtl.c (read_rtx): Handle (nil) like (define_constants).
+	Tighten the syntax a little.
+
+	* cfgloop.h, combine.c, cse.c, loop-iv.c, postreload.c, reload.c
+	* config/alpha/alpha.c, config/alpha/alpha.h, config/arc/arc.h
+	* config/arm/arm.h, config/frv/frv.h, config/i386/i386.c
+	* config/i386/predicates.md, config/m32r/m32r.h
+	* config/m68hc11/m68hc11.c, config/mcore/mcore.h, config/mips/mips.c
+	* config/mmix/mmix.c, config/pa/pa.h, config/sh/sh.h
+	* config/sparc/sparc.h, doc/tm.texi:
+	Replace all occurrences of NIL with UNKNOWN.
+
+2004-08-18  Zack Weinberg  <zack@codesourcery.com>
+
 	* dojump.c (do_jump <unordered_bcc>): Do not recursively call
 	self with a TRUTH_ORIF_EXPR; generate the appropriate jump
 	sequence inline.  Move drop_through_label code into this

ChangeLog entries between 2004-08-18T16:45:32Z and the last time everything
passed, on 2004-01-26T14:22:28Z:
--- /Users/regress/tbox/changelog_pass/gcc/ChangeLog	Fri Jan 23 18:13:03 2004
+++ gcc/ChangeLog	Tue Aug 17 15:08:19 2004
@@ -1,3 +1,773 @@
+2004-08-17  Robert Millan  <robertmh@gnu.org>
+
+	* configure.in: In noconfigdirs check, match GNU/k*BSD with GNU/Linux
+	(instead of FreeBSD).
+	* configure: Regenerate.
+
+2004-08-16  Paolo Bonzini  <bonzini@gnu.org>
+
+	* Makefile.in: Regenerate.
+	* configure: Regenerate.
+
+	* Makefile.def (bootstrap-stage): Rename extra_*_flags to
+	stage_*_flags.
+	* Makefile.tpl (configure-[+module+], all-[+module+]): Exit
+	for bootstrapped modules if toplevel bootstrap is going.
+	(GCC bootstrap): Generate per-stage targets for all bootstrapped
+	modules.  Adjust for changes in Makefile.def.  Enable several
+	rules even in non-bootstrap mode, just to avoid peppering the
+	template with unnecessary "@if/@endif gcc-bootstrap" pairs.
+	(stage-[+prev+]-bubble): Remove.
+
+	* Makefile.def (Dependencies): Depend on all-build-bison,
+	all-build-flex, all-build-byacc, all-build-texinfo, rather
+	than the host variations.
+	* Makefile.tpl (BUILD_DIR_PREFIX): Remove.  Replace throughout
+	with BUILD_SUBDIR.
+	(BISON): Update for recent Bisons.
+	(YACC): Fix typo.
+	(cross): Depend on all-build.
+	(all): Do not depend on all-build.
+	(prebootstrap): Remove.
+	(dep-kind): Accept separate prefixes for MODULE and ON variables.
+	(Prebootstrap dependencies): Add them to the per-stage targets
+	and to all-prebootstrap.
+	* configure.in (build_configdirs): Always enable build_tools.
+	(BUILD_DIR_PREFIX): Remove.
+
+	* Makefile.def (gcc): Add target variable.
+	(gdb, expect, guile, tk, tix): Replace with_x with extra_make_flags.
+	* Makefile.tpl (Autogenerated `all-*' targets): Invoke $(TARGET-*)
+	in the recursive `make', instead of hardwiring `all'.
+	(Autogenerated TARGET-* variables): New.
+
+2004-08-13  Brian Booth  <bbooth@redhat.com>
+
+	* MAINTAINERS: Remove myself from write-after-approval.
+
+2004-08-12  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* src-release: Stop distributing mmalloc with gdb (which doesn't
+	use it).
+	* Makefile.def: GDB doesn't depend on mmalloc anymore.
+	* Makefile.in: Regenerate.
+
+2004-08-09  Mark Mitchell  <mark@codesourcery.com>
+
+	* configure.in (arm*-*-eabi*): New target.
+	* configure: Regenerate.
+
+2004-08-06  Paolo Bonzini  <bonzini@gnu.org>
+
+	* Makefile.def (bfd, opcodes, gcc, zlib): Mark as bootstrap module.
+	(bison, byacc, flex, texinfo): Do not mark as bootstrap module.
+	(Dependencies): New section.
+	* Makefile.tpl (Dependencies): Generate from Makefile.def.
+	(configure-target-[+module+]): Depend on maybe-all-gcc
+	(all-prebootstrap): New name of all-bootstrap.  Changed throughout.
+	(toplevel profiledbootstrap): Fix dependencies.
+	* Makefile.in: Regenerate.
+
+2004-08-03  Mark Mitchell  <mark@codesourcery.com>
+
+	* configure.in (arm*-*-symbianelf*): Add ${libgcj} and
+	target-libiberty to noconfigdirs.
+	* configure: Regenerate.
+
+2004-08-03  Paul Brook  <paul@codesourcery.com>
+
+	* configure.in: Check for MPFR as well as GMP.
+	* configure: Regenerate.
+
+2004-08-01  Robert Millan  <robertmh@gnu.org>
+
+	* configure.in: Turn mt-linux into mt-gnu. Use mt-gnu and enable
+	libmudflap for all GNU-based systems (with Glibc).
+	* configure: Regenerate.
+
+2004-08-03 Paolo Bonzini <bonzini@gnu.org>
+
+	* Makefile.def (host-modules): Add gcc.
+	* Makefile.in: Regenerate.
+	* Makefile.tpl (sorry): New rule.
+	(configure-host, all-host, [+make_target+]-host, do-check,
+	install-host): Do not add gcc as a special case.
+	(host modules): Add a small special-casing for gcc.  Export
+	extra_make_flags through the environment.
+	(maybe-configure-gcc, configure-gcc, maybe-all-gcc, all-gcc,
+	maybe-check-gcc, check-gcc, maybe-install-gcc, install-gcc,
+	other recursive targets for gcc): Remove.
+
+	(all, do-[+make_target+], do-check): Wrap between unstage and stage.
+	(stage, unstage): New rules.
+	(stage[+id+]-start, stage[+id+]-end, [+compare-target+],
+	distclean-stage[+id+]): Use stage_current.
+	([+bootstrap-target+], profiledbootstrap): Do not invoke manually
+	the stage*-start rules.
+
+2004-08-02  Geoffrey Keating  <geoffk@apple.com>
+
+	* ltcf-cxx.sh: On Darwin, make archive multi-module, and don't
+	use -all_load flag.
+
+2004-08-02  Paolo Bonzini  <bonzini@gnu.org>
+
+	* configure.in: Sync from src, add noconfigdirs for crx-*-*.
+	* configure: Regenerate.
+
+2004-07-16  Toon Moene  <toon@moene.indiv.nluug.nl>
+
+	* maintainer-scripts/gcc_release: Revert yesterday's change.
+
+2004-07-16  Segher Boessenkool  <segher@kernel.crashing.org>
+
+	* MAINTAINERS: Add myself to write-after-approval.
+
+2004-07-15  Toon Moene  <toon@moene.indiv.nluug.nl>
+
+	* libf2c: Removed.
+	* gcc/gccbug.in: Updated because of libf2c removal.
+	* maintainer-scripts/gcc_release: Ditto.
+
+2004-07-09  Loren J. Rittle <ljrittle@acm.org>
+
+	* configure.in: Build libmudflap by default on FreeBSD.
+	* configure: Regenerated.
+
+2004-07-09  Mark Mitchell  <mark@codesourcery.com>
+
+	* configure.in: Do not build libmudflap by default on non-GNU/Linux
+	systems.
+	* configure: Regenerated.
+
+2004-07-08 John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
+
+	PR target/16344
+	* Makefile.tpl (profiledbootstrap): Build runtime libraries with
+	feedback based compiler.
+	* Makefile.in: Rebuilt.
+
+2004-07-08  Alexandre Oliva  <aoliva@redhat.com>
+
+	* Makefile.def (host_modules): Set bootstrap=true for flex.
+	* Makefile.tpl (all-gcc): Depend on texinfo and flex.
+	* Makefile.in: Rebuilt.
+
+2004-07-07  Jan Hubicka  <jh@suse.cz>
+
+	* MAINTAINERS: Add self as a profile feedback maintainer.
+
+2004-07-05  Phil Edwards  <phil@codesourcery.com>
+
+	* configure.in:  Do not prepend $srcdir to /dev/null in
+	makefile fragments.
+	* configure:  Regenerate.
+
+2004-07-01  Paolo Bonzini  <bonzini@gnu.org>
+
+	* Makefile.def (build_modules): Add bison, byacc, flex,
+	m4, texinfo.
+	(flags_to_pass): Add FLEX.
+	* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
+	(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
+	(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
+	DEFAULT_MAKEINFO): Remove.
+	(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
+	CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
+	(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
+	objdir or else use configured tool.
+	(all-build): New.
+	(all): Depend on it.
+	(Build module dependencies): Add.
+	* Makefile.in: Regenerate.
+	* configure.in: Better support for multiple build modules,
+	matching what is done for host/target modules.  Do not look
+	for "plausible" locations of build tools if Canadian cross.
+	Use autoconf's AC_PROG_CC to find a C compiler.  Define
+	BUILD_DIR_PREFIX.  Look for flex, makeinfo and m4.
+	* configure: Regenerate.
+	
+2004-06-22  Paolo Bonzini  <bonzini@gnu.org>
+
+	* Makefile.tpl (HOST_EXPORTS): Fix pasto.
+	* Makefile.in: Regenerate.
+
+2004-06-22  Paolo Bonzini  <bonzini@gnu.org>
+
+	* Makefile.tpl (configure-build-[+module+],
+	configure-[+module+], configure-target-[+module+]): Pass
+	[+extra_configure_args+].
+	(all-build-[+module+], all-[+module+], check-[+module+],
+	install-[+module+], [+make_target+]-[+module+],
+	all-target-[+module+], check-target-[+module+],
+	install-target-[+module+], [+make_target+]-target-[+module+]):
+	Pass [+extra_make_args+].
+	(HOST_EXPORTS): Include the former GCC_HOST_EXPORTS.
+	(GCC_HOST_EXPORTS): Remove.
+	(configure-gcc, all-gcc, GCC_STRAP_TARGETS, profiledbootstrap,
+	cross, check-gcc, check-gcc-c++, install-gcc,
+	gcc-no-fixedincludes, [+make_target+]-gcc, stage[+id+]-bubble):
+	Replace GCC_HOST_EXPORTS with HOST_EXPORTS.
+	* Makefile.in: Regenerate.
+
+2004-06-21  Matthew Sachs  <msachs@apple.com>
+
+	* MAINTAINERS: Added self to write-after-approval.
+
+2004-06-21  Christopher Faylor  <cgf@alum.bu.edu>
+
+	* configure.in: Check for srcdir/winsup rather than build directory
+	winsup.
+	* configure: Regenerate.
+
+2004-06-17  Corinna Vinschen  <vinschen@redhat.com>
+
+	* configure.in: Don't build Cygwin native newlib if winsup
+	directory is missing.  Emit warning instead.
+	* configure: Regenerate.
+
+2004-06-09  Paolo Bonzini  <bonzini@gnu.org>
+
+	* Makefile.tpl (touch-stage[+id+]): New.
+	(restage[+prev+]): Depend on touch-stage[+id+].
+
+	* Makefile.tpl (RECURSE_FLAGS_TO_PASS): New.
+	Use it throughout.
+
+	* Makefile.def: Add profile and feedback bootstrap stages.
+	Remove next field from bootstrap stages.
+	* Makefile.tpl (LN, LN_S): Substitute.
+	(stageN-start, stageN-end): Use double-colon rules, to
+	provide a hook for additional setup commands.
+	(distclean-stageN-gcc, restageN): Create dependencies from
+	[+prev+], not from [+next+].
+	(stageN-bubble): Add commands for successive stages from
+	[+prev+], using double-colon rules.
+	(all-stageN-gcc): Fix typo.
+	(stagefeedback-start, profiledbootstrap): New.
+	* Makefile.in: Regenerate.
+	* configure.in: Call ACX_PROG_LN.
+	* configure: Regenerate.
+
+2004-06-08  Canqun Yang  <canqun@nudt.edu.cn>
+
+	* MAINTAINERS (Write After Approval): Add myself.
+
+2004-06-03  Mark G. Adams  <mark.g.adams@sympatico.ca>
+
+	* MAINTAINERS (Write After Approval): Add myself.
+
+2004-06-03  Paolo Bonzini  <bonzini@gnu.org>
+
+	* configure.in: Fix --enable-bootstrap breakage introduced in trees
+	without gcc.
+	* configure: Regenerate.
+
+2004-06-01  Paolo Bonzini  <bonzini@gnu.org>
+
+	* Makefile.tpl: Fix typo.
+	* Makefile.in: Regenerate.
+
+2004-06-01  Paolo Bonzini <bonzini@gnu.org>
+
+	* configure.in: Remove new- prefix from toplevel
+	bootstrap targets.
+	* configure: Regenerate.
+
+2004-06-01  Paolo Bonzini  <bonzini@gnu.org>
+
+	* Makefile.tpl (all.normal): Rename to all.
+	(all): Replace with a rule to pick the default
+	target from configure.
+	(all-gcc, configure-gcc): Use conditionals to
+	do nothing when toplevel bootstrap is going on.
+	(GCC directory bootstrap) [gcc-bootstrap]: Disable.
+	(Toplevel bootstrap) [gcc-no-bootstrap]: Disable.
+	* configure.in: Support --enable-bootstrap.
+
+	* Makefile.def: Remove new- prefix from toplevel
+	bootstrap targets.
+	* Makefile.tpl: Likewise.
+
+	* Makefile.def: Add bootstrap_stage 4.  Add bootstrap2
+	target.
+
+	* Makefile.tpl (Toplevel bootstrap): Pass $(BASE_FLAGS_TO_PASS)
+	$(RECURSE_FLAGS) to recursive invocation of make.
+
+	* Makefile.in: Regenerate.
+	* configure: Regenerate.
+
+2004-05-30  Andreas Jaeger  <aj@suse.de>
+	    Jim Wilson <wilson@specifixinc.com>
+
+	* config-ml.in: Pass FFLAGS and ADAFLAGS for multilibs, handle F77
+	like CC.
+
+2004-05-27  Daniel Jacobowitz  <dan@debian.org>
+
+	* configure.in: Fix sed invocation for GFORTRAN_FOR_TARGET.
+	* configure: Regenerate.
+
+2004-05-25  Daniel Jacobowitz  <drow@false.org>
+
+	* Makefile.tpl (BUILD_EXPORTS, HOST_EXPORTS, GCC_HOST_EXPORTS)
+	(STAGE_HOST_EXPORTS, BASE_TARGET_EXPORTS, RAW_CXX_TARGET_EXPORTS)
+	(NORMAL_TARGET_EXPORTS): New macros.  Use them in all the recursive
+	targets.
+	* Makefile.in: Regenerate.
+
+2004-05-24  Paolo Bonzini <bonzini@gnu.org>
+
+	* configure.in: Test the ability to symlink directories.
+	* configure: Regenerate.
+
+	* Makefile.def (bootstrap-stage): New definitions.
+	* Makefile.tpl (configure-stage1-gcc,
+	configure-stage2-gcc, configure-stage3-gcc,
+	all-stage1-gcc, all-stage2-gcc, all-stage3-gcc,
+	new-bootstrap, new-cleanstrap, new-restage1, new-restage2,
+	new-restage3, compare): Autogenerate, see Makefile.in
+	entry for behavioral changes.
+	(distclean-stage1, new-stage1-start, new-stage1-end,
+	new-stage1-bubble, distclean-stage2, new-stage2-start,
+	new-stage2-end, new-stage2-bubble, distclean-stage3,
+	new-stage3-start, new-stage3-end): New autogenerated targets.
+	(objext, prebootstrap, BOOT_CFLAGS,
+	POSTSTAGE1_FLAGS_TO_PASS): Move above the autogenerated
+	targets.
+
+	* Makefile.in: Regenerate.
+	(distclean-stage1, new-stage1-start, new-stage1-end,
+	new-stage1-bubble, distclean-stage2, new-stage2-start,
+	new-stage2-end, new-stage2-bubble, distclean-stage3,
+	new-stage3-start, new-stage3-end): New targets.
+	(all-stage1-gcc): Move prebootstrap dependency from here...
+	(configure-stage1-gcc): ...to here.
+	(new-bootstrap): Use bubble targets.
+	(new-cleanstrap, new-restage1, new-restage2, new-restage3):
+	Use per-stage distclean targets.
+	(configure-stage1-gcc, configure-stage2-gcc,
+	configure-stage3-gcc, all-stage1-gcc,
+	all-stage2-gcc, all-stage3-gcc, new-bootstrap):
+	Use new-stageN-start to prepare the tree.
+
+2004-05-23  Paolo Bonzini  <bonzini@gnu.org>
+
+	* Makefile.def (host_modules): add libcpp.
+	* Makefile.tpl: Add dependencies on and for libcpp.
+	* Makefile.in: Regenerate.
+	* configure.in: Add libcpp host module.
+	* configure: Regenerate.
+
+2004-05-21  Paolo Bonzini  <bonzini@gnu.org>
+
+	* Makefile.tpl: Whenever a recursive target is defined, wrap
+	it in a special @if/@endif block, and prepare its maybe
+	dependency in the @if/@endif block
+	* configure.in: Instead of writing maybe dependencies, remove
+	the @if/@endif statements, and remove the @if/@endif blocks
+	that remain.
+	* configure: Regenerate.
+	* Makefile.in: Regenerate.
+
+2004-05-20  Janis Johnson  <janis187@us.ibm.com>
+
+	* MAINTAINERS (Various Maintainers): Add myself for compat testsuite.
+
+2004-05-18  Kaz Kojima  <kkojima@gcc.gnu.org>
+
+	PR bootstrap/15120
+	* libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on sh*.
+	* */configure: Rebuilt.
+
+2004-05-17  Zack Weinberg  <zack@codesourcery.com>
+
+	* Makefile.def, Makefile.tpl, configure.in: Remove all mention
+	of libf2c.
+	* configure, Makefile.in: Regenerate.
+
+2004-05-13  Tobias Schlüter  <tobi@gcc.gnu.org>
+
+	* MAINTAINERS (Write After Approval): Add myself.
+
+2004-05-13  Diego Novillo  <dnovillo@redhat.com>
+
+	Merge from tree-ssa-20020619-branch.
+
+	* Makefile.def: Add libbanshee, libmudflap and libgfortran.
+	* Makefile.tpl (BUILD_CONFIGDIRS): Add libbanshee.
+	(HOST_GMPLIBS): Define.
+	(HOST_GMPINC): Define.
+	(TARGET_LIB_PATH): Add libmudflap.
+	(GFORTRAN_FOR_TARGET): Define.
+	(configure-build*): Export GFORTRAN.
+	(configure-gcc): Export GMPLIBS and GMPINC.
+	(all-gcc): Add maybe-all-libbanshee.
+	(configure-target-libgfortran): Define.
+	* Makefile.in: Regenerate.
+	* configure.in (host_libs): Add libbanshee.
+	(target_libraries): Add target-libmudflap and target-libgfortran.
+	Add --with-libbanshee.
+	Handle --disable-libmudflap.
+	(*-*-freebsd*): Use with_gmp.
+	Add $(libgcj) to noconfigdirs.
+	* configure: Regenerate.
+	* depcomp: New file.
+	* MAINTAINERS: Add tree-ssa maintainers.
+
+2004-05-04  Vladimir Makarov  <vmakarov@redhat.com>
+
+	* MAINTAINERS (Various Maintainers): Add myself.
+
+2004-04-30  Brian Ford  <ford@vss.fsi.com>
+
+	* MAINTAINERS (Write After Approval): Add myself.
+
+2004-04-29  Uros Bizjak  <uros@kss-loka.si>
+
+	* MAINTAINERS (Write After Approval): Add myself.
+
+2004-04-28  Paolo Bonzini  <bonzini@gnu.org>
+
+	* config/acx.m4: Fix fastcompare support for new-bootstrap.
+	* configure: Regenerate.
+
+2004-04-27  Paolo Bonzini  <bonzini@gnu.org>
+
+	Revert:
+	2004-04-26  Paolo Bonzini  <bonzini@gnu.org>
+
+	* Makefile.def (flags_to_pass): Remove *dir variables that
+	are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
+	as well as prefix and exec_prefix.
+	* Makefile.in: Regenerate.
+
+2004-04-26  Robert Millan  <robertmh@gnu.org>
+
+	Add patches from libtool CVS.
+	* libtool.m4: Add kfreebsd*-gnu and knetbsd*-gnu.
+	* ltconfig: Likewise.
+	* ltcf-c.sh: Likewise.
+	* ltcf-cxx.sh: Likewise.
+	* ltcf-gcj.sh: Likewise.
+
+2004-04-26  Paolo Bonzini  <bonzini@gnu.org>
+
+	* Makefile.def (host_modules): Mark with the bootstrap
+	flag packages on which gcc depends.
+	* Makefile.tpl (all-bootstrap): Use it.
+	* Makefile.in: Regenerate.
+
+2004-04-26  Paolo Bonzini  <bonzini@gnu.org>
+
+	* Makefile.def (flags_to_pass): Remove *dir variables that
+	are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
+	as well as prefix and exec_prefix.
+	* Makefile.in: Regenerate.
+
+2004-04-26  Paolo Bonzini  <bonzini@gnu.org>
+
+	* configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
+	* configure: Regenerate.
+	* config/acx.m4: Mutuate ACX_PROG_CMP_IGNORE_INITIAL from gcc.
+	* gcc/Makefile.tpl (compare): Use the result of the test.
+	* gcc/Makefile.in: Regenerate.
+
+2004-04-23  Paolo Bonzini  <bonzini@gnu.org>
+
+	* Makefile.tpl (all-stage1-gcc, all-stage2-gcc, all-stage3-gcc):
+	Always relocate gcc and prev-gcc to the original names, even
+	if the build fails.
+	(new-cleanstrap, new-restage1, new-restage2, new-restage3):
+	New targets.
+
+2004-04-23  Laurent GUERBY <laurent@guerby.net>
+
+	* MAINTAINERS: Update my email address.
+
+2004-04-19  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
+
+	* configure.in (mips*-*-irix5*): Enable ld.
+	* configure: Regenerate.
+
+2004-04-16  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
+
+	* configure: Regenerate.
+
+2004-04-15  James E Wilson  <wilson@specifixinc.com>
+
+	* Makefile.tpl (configure-[+module+], configure-gcc,
+	configure-stage1-gcc, configure-stage2-gcc, configure-stage3-gcc):
+	Set and export LDFLAGS.
+	* Makefile.in: Regenerate.
+
+2004-04-12  Michael Chastain  <mec.gnu@mindspring.com>
+
+	* MAINTAINERS: Add myself to write-after-approval.
+
+2004-04-09  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	PR bootstrap/14871
+	* Makefile.tpl: If we don't have built-in-tree target tools,
+	use the ones found by configure rather than hacking around with
+	program_transform_name.
+	* configure.in: Give Makefile.tpl the information necessary
+	to do that.
+	* Makefile.in: Regenerate.
+	* configure: Regenerate.
+
+2004-04-06  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	PR bootstrap/14760
+	* configure.in: When computing baseargs, strip *all* copies of
+	offending options.  Also, don't match/substitute the trailing space,
+	so that this actually works when two similar options are separated by
+	only one space.
+	* configure: Regenerate.
+
+2004-04-06  David Edelsohn  <edelsohn@gnu.org>
+
+	* configure.in (powerpc-*-aix*): Remove target-libada from noconfigdirs.
+	(rs6000-*-aix*): Same.
+	* configure: Regenerate.
+
+2004-04-05  Ranjit Mathew  <rmathew@hotmail.com>
+
+	* MAINTAINERS: Add myself to write-after-approval.
+
+2004-04-03  Bud Davis  <bdavis9659@comcast.net>
+
+	* MAINTAINERS: Add myself to write-after-approval.
+
+2004-03-24  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.tpl (top level bootstrap support): Remove now-unneeded
+	STRICT_WARN, WARN_CFLAGS flags passed down to make.
+	* Makefile.in: Regenerate.
+
+	* configure.in (top level bootstrap support): Rework --enable-werror
+	to set @stage2_werror_flag@.
+	* configure: Regenerate.
+	* Makefile.tpl (top level bootstrap support): Pass
+	@stage2_werror_flag@ down to configure in stages 2 and 3.
+	* Makefile.in: Regenerate.
+
+2004-03-23  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.tpl (new-bootstrap): Set CC and CC_FOR_BUILD in configure
+	for stages 2 and 3 as well as in make.  As a consequence, remove
+	OUTPUT_OPTION (now detected by configure) from the flags passed down
+	to make.
+	* Makefile.in: Regenerate.
+
+	* Makefile.tpl (new-bootstrap): Fix typo.
+	* Makefile.in: Regenerate.
+
+2004-03-22  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.tpl: Rearrange by moving recursive_targets rules
+	into their proper sections.
+	* Makefile.tpl (top level bootstrap support): Move disabling
+	of coverage flags from 'make' to 'configure'; improve comments.
+	* Makefile.in: Regenerate.
+
+	* Makefile.tpl (experimental top level bootstrap) Move stage1
+	language setting from all- target to configure- target; disable
+	intermodule optimization in stage 1; prevent gratuitous rebuilds
+	of stage 1.
+	* Makefile.in: Regenerate.
+	* configure.in: Comma-separate stage 1 language list for top
+	level bootstrap.
+	* configure: Regenerate.
+
+	* Makefile.tpl: Clean up experimental top level bootstrap support:
+	note known problems; set CONFIG_SHELL; don't set BUILD_CC; relocate
+	prev-gcc in configure- targets as well as all- targets.
+	* Makefile.in: Regenerate.
+
+2004-03-21  Kelley Cook  <kcook@gcc.gnu.org>
+
+	* compile: New file imported from automake.
+
+2004-03-17  Paolo Bonzini  <bonzini@gnu.org>
+
+	* configure.in: Remove symbolic link section.
+	* configure: Regenerate.
+	* Makefile.tpl (links): Remove.
+	* Makefile.in: Regenerate.
+
+2004-03-15  Paolo Bonzini  <bonzini@gnu.org>
+	    Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* configure.in (DEFAULT_YACC, DEFAULT_M4, DEFAULT_LEX):
+	Set with AC_CHECK_PROGS.
+	* configure.in: Fix comment typo from last patch.
+	* configure: Regenerate.
+
+2004-03-15  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.tpl: Introduce experimental top level bootstrap support.
+	* Makefile.in: Regenerate.
+	* configure.in: Introduce support for top level bootstrap.
+	* configure: Regenerate.
+
+2004-03-12  Eric Botcazou  <ebotcazou@gcc.gnu.org>
+	    Paolo Bonzini  <bonzini@gnu.org>
+
+	PR bootstrap/14522
+	* configure.in: Cope with shells that do not support unquoted ^
+	* configure: Regenerate.
+
+2004-03-11  Eric Botcazou  <ebotcazou@gcc.gnu.org>
+	    Paolo Bonzini  <bonzini@gnu.org>
+
+	PR bootstrap/14522
+	* configure.in: Cope with shells that do not support nesting
+	quotes inside quoted backquote substitutions.
+	* configure: Regenerate.
+
+2004-03-10  Andrew Pinski  <pinskia@physics.uc.edu>
+
+	PR bootstrap/14522
+	* configure.in: Fix escaping of $.
+	* configure: Regenerate.
+
+2004-03-11  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* configure: Regenerate, since I forgot to while committing Paolo's
+	changes.
+
+2004-03-08  Paolo Bonzini  <bonzini@gnu.org>
+
+	PR ada/14131
+	Move language detection to the top level.
+	* configure.in: Find default values for the tools as
+	soon as possible.  Disable ada if GNAT is not found.
+	Emit error message about missing languages.  Expand
+	--enable-languages=all for the gcc subdirectory.
+
+2004-03-10  Ben Elliston  <bje@gnu.org>
+
+	* MAINTAINERS: Update my email address.
+
+2004-03-05  David Edelsohn  <edelsohn@gnu.org>
+
+	* ltconfig: Disable building static libraries if building shared
+	libraries on AIX 5L.
+
+2004-03-01  Richard Sandiford  <rsandifo@redhat.com>
+
+	* configure.in (mips64*-*-linux*): Override mips*-*-linux* case
+	and disable libgcj.
+	* configure: Regenerated.
+
+2004-03-01  Brian Booth  <bbooth@redhat.com>
+
+	* MAINTAINERS: Add myself to write-after-approval.
+
+2004-03-01  Paolo Bonzini  <bonzini@gnu.org>
+
+	* MAINTAINERS: Add myself to write-after-approval.
+
+2004-02-28  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	PR bootstrap/7087
+	* Makefile.tpl: Guard XFOO sed statements better.
+	* Makefile.tpl: Add dependency for configure-target-libada.
+	* Makefile.in: Regenerate (incidentally fixes broken
+	commit when libada-branch was merged).
+
+2004-02-25  Kelley Cook  <kcook@gcc.gnu.org>
+
+	* MAINTAINERS: Add myself to write-after-approval.
+
+2004-02-20  Andrew Pinski  <pinskia@physics.uc.edu>
+
+	* MAINTAINERS: Add Nicola Pero and myself as libobjc
+	maintainers.
+
+2004-02-20  Andrew Cagney  <cagney@redhat.com>
+
+	* config.guess: Update from version 2003-10-16 to 2004-02-16.
+	* config.sub: Update from version 2003-11-03 to 2004-02-16.
+
+2004-02-19  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	PR bootstrap/11932
+	* mkinstalldirs, install-sh: Import from automake CVS HEAD.
+
+2004-02-14  Jerry Quinn  <jlquinn@optonline.net>
+
+	* MAINTAINERS: Added myself to write-after-approval.
+
+2004-02-14  Michael Koch  <konqueror@gmx.de>
+
+	* MAINTAINERS: Added myself to write-after-approval.
+
+2004-02-13  Joseph S. Myers  <jsm@polyomino.org.uk>
+
+	* MAINTAINERS: Move Steve Chamberlain to write-after-approval.  Move
+	some OS port maintainers to OS port maintainers section.
+
+2004-02-13  Frank Ch. Eigler  <fche@redhat.com>
+
+	* MAINTAINERS: Add self.
+
+2004-02-12  Kazu Hirata  <kazu@cs.umass.edu>
+
+	* MAINTAINERS: Alphabetize.
+
+2004-02-12  Paolo Bonzini  <bonzini@gnu.org>
+
+	* MAINTAINERS: Remove myself.
+
+2004-02-11  David Edelsohn  <edelsohn@gnu.org>
+
+	* configure.in (powerpc-*-aix*): Add target-libada to noconfigdirs.
+	(rs6000-*-aix*): Same.
+	* configure: Regenerate.
+
+2004-02-11  Kelley Cook  <kcook@gcc.gnu.org>
+
+	* configure.in (host): Add in missing $noconfigdirs to defines.
+	* configure: Regenerate.
+
+2004-02-10  Arnaud Charlet  <charlet@act-europe.fr>,
+	    Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	PR ada/6637, PR ada/5911
+	Merge with libada-branch:
+	* configure.in, Makefile.tpl, Makefile.def: Add target-libada,
+	with appropriate dependencies. Add --enable-libada configure switch.
+	* configure, Makefile.in: Regenerate.
+
+2004-02-09  Paolo Bonzini  <bonzini@gnu.org>
+
+	* MAINTAINERS: Add myself to write-after-approval.
+
+2004-02-05  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
+
+	* configure.in: Don't pass --with-stabs on IRIX 5 either.
+	* configure: Regenerate.
+
+2004-02-04  Geoffrey Keating  <geoffk@apple.com>
+
+	Merge from upstream:
+
+	* ltmain.in: When setting IFS to '~', be careful about user
+	arguments that contain '~'.
+
+	2004-02-04  Peter O'Gorman  <peter@pogma.com>
+
+	* ltmain.in (infer_tag): Move tag inferrence to a shell function.
+	Also test $base_compile against $CC with escaped arguments. Bug
+	reported by Geoff Keating <geoffk@apple.com>.
+
+2004-02-04  Kazu Hirata  <kazu@cs.umass.edu>
+
+	* MAINTAINERS: Remove i960 port.
+
 2004-01-23  DJ Delorie  <dj@redhat.com>
 
 	* Makefile.def (target_modules) [libiberty]: Don't stage.
--- /Users/regress/tbox/changelog_pass/gcc/gcc/ChangeLog	Mon Jan 26 06:23:27 2004
+++ gcc/gcc/ChangeLog	Wed Aug 18 09:46:28 2004
@@ -1,2724 +1,8490 @@
-2004-01-26  Eric Botcazou  <ebotcazou@libertysurf.fr>
+2004-08-18  Zack Weinberg  <zack@codesourcery.com>
 
-	PR target/13666
-	* config/sparc/sparc.c (function_arg_union_value): New function.
-	(function_arg): Use it to deal with unions.
-	(function_value): Likewise.  Define 'regbase' only for ARCH64.
-	Replace a conditional statement by a simpler one.
+	* dojump.c (do_jump <unordered_bcc>): Do not recursively call
+	self with a TRUTH_ORIF_EXPR; generate the appropriate jump
+	sequence inline.  Move drop_through_label code into this
+	block, being the only place it is used.  Adjust comments.
+
+2004-08-18  Fariborz Jahanian <fjahanian@apple.com>
+
+	* config/rs6000/altivec.md: Add new patterns for calls to
+	save_world/rest_world functions.
+
+	* config/rs6000/rs6000-protos.h: (save_world_operation,
+	restore_world_operation) new declarations.
+
+	* config/rs6000/rs6000.c: (struct rs6000_stack) new world_save_p
+	field added.
+	(rs6000_stack_info): Set world_save_p field.
+	(save_world_operation): New function.
+	(restore_world_operation): New function.
+	(compute_save_world_info): New function.
+	(rs6000_stack_info): Call compute_save_world_info.
+	(rs6000_emit_prologue): Check for world_save_p and generate
+	pattern to call save_world for saving all non-volatile and
+	special registers.
+	(rs6000_emit_epilogue): Check for world_save_p and generate
+	pattern to call rest_world to restore saved registers.
+
+	config/rs6000/rs6000.h: macros FIRST_SAVED_ALTIVEC_REGNO,
+	FIRST_SAVED_FP_REGNO, FIRST_SAVED_GP_REGNO defined.
+	(rs6000_reg_names): New entries added for save_world_operation and
+	restore_world_operation.
+
+2004-08-18  Caroline Tice  <ctice@apple.com>
+
+	* Makefile.in (STAGEFEEDBACK_FLAGS_TO_PASS) Add
+	"-freorder-blocks-and-partition" to the flags used in second
+	stage of profiledbootstrap.
+	* bb-reorder.c (push_to_next_round_p): Add new variable,
+	next_round_is_last; set and use variable to make sure, when
+	partitioning, that the last trace construction round consists
+	of all (and only) cold basic blocks.
+	(rotate_loop): Don't copy blocks that end in a section
+	crossing jump.
+	(copy_bb): Correctly initialize "partition" of duplicated bb.
+	(add_unlikely_executed_notes): Add a comment.
+	(find_rarely_executed_basic_blocks_and_crossing_edges): Modify
+	to make sure, if function contains hot blocks, that the
+	successors of ENTRY_BLOCK_PTR are hot; also, only look for
+	crossing edges if the architecture supports named sections.
+	(mark_bb_for_unlikely_executed_section): Modify to always
+	insert the NOTE_INSN_UNLIKELY_EXECUTED_CODE immediately after
+	the basic block note insn.
+	(fix_crossing_unconditional_branches): Remove extra space.
+	(fix_edges_for_rarely_executed_code): Modify to only do
+	partitioning work if the architecture supports named sections.
+	(reorder_basic_blocks): Modify to only add
+	NOTE_INSN_UNLIKELY_EXECUTED_CODE notes if the architecture
+	supports named sections.
+	* c-common.c (handle_section_attribute): Initialize new global
+	variable, user_defined_section_attribute, to true if user has
+	specified one.
+	* cfgcleanup.c (try_forward_edges): Modify to not attempt to
+	forward edges that cross section boundaries.
+	* cfglayout.c (fixup_reorder_chain): Modify to only fix up
+	partitioning information if the architecture supports named
+	sections.
+	* cfgrtl.c (target.h): Add statement to include this.
+	(rtl_split_block): Make sure newly created bb gets correct
+	partition.
+	(try_redirect_by_replacing_jump): Make sure redirection isn't
+	attempting to cross section boundaries.
+	(force_nonfallthru_and_redirect): Only do partition fix up if
+	architecture supports named sections.
+	(rtl_split_edge): Make sure newly created bb ends up in
+	correct partition.
+	(commit_one_edge_insertion): Remove code that incorrectly
+	updated basic block partition; Make sure partition fix up only
+	happens if architecture supports named sections and it's not
+	already done.
+	(rtl_verify_flow_info_1): Fix if-condition on test/error
+	condition that fallthru edges are not allowed to cross section
+	boundaries.
+	* defaults.h (NORMAL_TEXT_SECTION_NAME): Remove this.
+	* final.c (final_scan_insn): Remove redundant test from if-statement;
+	change calls to text_section into calls to function_section; add code
+	to only to partitioning fix up if architecture supports named
+	sections.
+	* ifcvt.c (find_if_case_1): Make sure newly created bb has correct
+	partition.
+	(if_convert): Add targetm.have_named_sections to test.
+	* output.h (unlikely_section_label): Extern declaration for new global
+	variable.
+	(unlikely_text_section_name): Likewise.
+	* opts.c (decode_options): If both partitioning and DWARF debugging
+	are turned on, issue a warning that this doesn't work, and change
+	partitiong to basic block reordering (without hot/cold partitions).
+	* passes.c (rest_of_handle_final): Re-set new global variable,
+	user_defined_section_attribute, to false.
+	(rest_of_compilation): Change options for calling partitioning
+	function: Don't call if the user defined the section attribute, and
+	don't call if DECL_ONE_ONLY is true for the current function.
+	* predict.c (choose_function_section): Return immediately if we
+	are doing hot/cold partitioning (i.e. let the basic block partitioning
+	determine where the function belongs).
+	* reg-stack.c (emit_swap_insn): Add condition to step over
+	NOTE_INSN_UNLIKELY_EXECUTED_CODE notes.
+	* toplev.c (user_defined_section_attribute): New global variable.
+	* toplev.h (user_defined_section_attribute): Extern declaration for new
+	global variable.
+	* varasm.c (unlikely_section_label): New global variable.
+	(unlikely_text_section_name): New global variable.
+	(unlikely_text_section): Add code to initialize unlikely_text_section_name
+	if necessary; modify to use unlikely_text_section_name and
+	unlikely_section_label; also to use named_section properly.
+	(in_unlikely_text_section):  Modify to work correctly with named_section
+	and to use unlikely_text_section_name.
+	(named_section):  Add code to work properly with cold section.
+	(function_section): Clean up if-statement.
+	* config/darwin.c (darwin_asm_named_section): Return to original code,
+	removing use of SECTION_FORMAT_STRING.
+	* config/arm/pe.h (switch_to_section):  Add case for
+	in_unlikely_executed_text to switch statement.
+	* config/i386/cygming.h (switch_to_section): Likewise.
+	* config/i386/darwin.h (NORMAL_TEXT_SECTION_NAME): Remove.
+	(SECTION_FORMAT_STRING): Likewise.
+	* config/mcore/mcore.h (switch_to_section): Likewise.
+	* config/rs6000/darwin.h (NORMAL_TEXT_SECTION_NAME): Remove.
+	(SECTION_FORMAT_STRING): Remove.
+
+2004-08-18  Roger Sayle  <roger@eyesopen.com>
+
+	* config/i386/i386.h (FIXED_REGISTERS): Update encoding to be
+	-ffixed-reg safe, by preserving the meanings of zero and one.
+	(CALL_USED_REGISTERS): Likewise.
+	(CONDITIONAL_REGISTER_USAGE): Update to process new encodings.
+
+2004-08-18  Kaz Kojima  <kkojima@gcc.gnu.org>
+
+	* config/sh/sh.c (split_branches): Check the result of
+	next_active_insn.
+	(sh_output_mi_thunk): Call init_flow if basic_block_info is null.
+	Call rtl_register_cfg_hooks.
+
+2004-08-18  Richard Henderson  <rth@redhat.com>
+
+	* rtl.h (MEM_READONLY_P): Replace RTX_UNCHANGING_P.
+	* alias.c (true_dependence): Update to match new semantics.
+	(canon_true_dependence, write_dependence_p): Likewise.
+	(anti_dependence, output_dependence): Update write_dependence_p args.
+	(unchanging_anti_dependence): Remove.
+	* calls.c (purge_mem_unchanging_flag): Remove.
+	(fixup_tail_calls): Don't call it.
+	(expand_call): Don't add unchanging memory to function usage.
+	* expr.c (emit_block_move_via_libcall): Likewise.
+	(clear_storage_via_libcall): Don't clobber RTX_UNCHANGING_P mems.
+	(get_subtarget): Don't use RTX_UNCHANGING_P.
+	(expand_assignment, store_constructor, expand_expr_real_1): Likewise.
+	(do_tablejump): Set MEM_READONLY_P, not RTX_UNCHANGING_P.
+	* combine.c (get_last_value_validate): Use MEM_READONLY_P.
+	* cse.c (insert): Don't use RTX_UNCHANGING_P.
+	(cse_insn, canon_hash): Use MEM_READONLY_P.
+	* emit-rtl.c (set_mem_attributes_minus_bitpos): Use MEM_READONLY_P
+	instead of RTX_UNCHANGING_P.
+	* explow.c (maybe_set_unchanging): Remove.
+	* expr.h (maybe_set_unchanging): Remove.
+	* flow.c (insn_dead_p, mark_used_regs): Use anti_dependence.
+	* function.c (assign_stack_temp_for_type): Don't use RTX_UNCHANGING_P.
+	(assign_parm_setup_reg, expand_function_start): Likewise.
+	* integrate.c (copy_rtx_and_substitute): Likewise.
+	* ra-rewrite.c (emit_colors): Likewise.
+	* regmove.c (copy_src_to_dest, regmove_optimize): Likewise.
+	(fixup_match_1): Likewise.
+	* reload1.c (reload, alter_reg): Likewise.
+	* local-alloc.c (validate_equiv_mem): Check MEM_READONLY_P,
+	not RTX_UNCHANGING_P.
+	(equiv_init_varies_p): Likewise.
+	* loop-invariant.c (check_maybe_invariant): Likewise.
+	* resource.c (mark_referenced_resources, mark_set_resources): Likewise.
+	* loop.c (note_addr_stored): Likewise.
+	(prescan_loop): Likewise. Don't check function usage for clobbered
+	unchanging memory.
+	* rtlanal.c (rtx_unstable_p): Check MEM_READONLY_P,
+	not RTX_UNCHANGING_P.
+	(rtx_varies_p, modified_between_p, modified_in_p): Likewise.
+	* varasm.c (force_const_mem): Likewise.
+	* stmt.c (expand_decl): Don't set RTX_UNCHANGING_P.
+	* web.c (entry_register): Likewise.
**** TRUNCATED ****
-------------- next part --------------
/bin/sh /Users/regress/tbox/cvs-gcc/gcc/gcc/../move-if-change tmp-c-parse.y c-parse.y
bison  -o c-parse.c c-parse.y
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="" \
/bin/sh /Users/regress/tbox/cvs-gcc/gcc/gcc/mkconfig.sh config.h
TARGET_CPU_DEFAULT="" \
HEADERS="config/rs6000/rs6000.h config/darwin7.h config/darwin.h config/rs6000/darwin.h defaults.h" DEFINES="" \
/bin/sh /Users/regress/tbox/cvs-gcc/gcc/gcc/mkconfig.sh tm.h
TARGET_CPU_DEFAULT="" \
HEADERS="auto-host.h ansidecl.h" DEFINES="" \
/bin/sh /Users/regress/tbox/cvs-gcc/gcc/gcc/mkconfig.sh bconfig.h
gcc -c   -g -no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0 -DIN_GCC   -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes  -fno-common  -mdynamic-no-pic -DHAVE_CONFIG_H -DGENERATOR_FILE    -I. -I. -I/Users/regress/tbox/cvs-gcc/gcc/gcc -I/Users/regress/tbox/cvs-gcc/gcc/gcc/. -I/Users/regress/tbox/cvs-gcc/gcc/gcc/../include -I./../intl -I/Users/regress/tbox/cvs-gcc/gcc/gcc/../libcpp/include -I/Users/regress/tbox/cvs-gcc/gcc/gcc/../libbanshee/libcompat -I/Users/regress/tbox/cvs-gcc/gcc/gcc/../libbanshee -I/Users/regress/tbox/cvs-gcc/gcc/gcc/../libbanshee/points-to  \
    /Users/regress/tbox/cvs-gcc/gcc/gcc/genmodes.c -o genmodes.o
gcc: unrecognized option `-no-cpp-precomp'
cc1: error: invalid option `dynamic-no-pic'
make[2]: *** [genmodes.o] Error 1
make[1]: *** [stage1_build] Error 2
make: *** [bootstrap] Error 2
+ '[' -s gcc/.bad_compare ']'
+ exit 1
-------------- next part --------------
-- 
Geoffrey Keating <geoffk@apple.com> 
(via an automated GCC regression-testing script.)


More information about the Gcc-regression mailing list