5 GCC regressions, 0 new, with your patch on 2003-06-30T08:33:24Z.
GCC regression checker
geoffk@apple.com
Mon Jun 30 13:46:00 GMT 2003
With your recent patch, GCC has some regression test failures, which
used to pass. There are 0 new failures, and 5
failures that existed before and after that patch; 0 failures
have been fixed.
The old failures, which were not fixed or introduced by your patch, are:
native g77.sum g77.f-torture/execute/980520-1.f
native gcc.sum gcc.c-torture/execute/20000412-3.c
native gcc.sum gcc.dg/pch/common-1.c
native gcc.sum gcc.dg/pch/inline-1.c
native gcc.sum gcc.dg/warn-1.c
For more information, see http://gcc.gnu.org/regtest/.
-------------- next part --------------
ChangeLog entries since last run on 2003-06-30T03:45:05Z:
--- /Users/regress/tbox/changelog_mail/gcc/gcc/ChangeLog Sun Jun 29 20:45:44 2003
+++ gcc/gcc/ChangeLog Mon Jun 30 01:34:04 2003
@@ -1,3 +1,30 @@
+Mon Jun 30 10:03:02 CEST 2003 Jan Hubicka <jh@suse.cz>
+
+ * cfgrtl.c (verify_flow_info): Accept degenerated condjumps
+ in cfglayout mode.
+
+Mon Jun 30 09:52:39 CEST 2003 Jan Hubicka <jh@suse.cz>
+
+ * i386.c (standard_80387_constant_p): Accept TFmode constants too.
+ (init_ext_80387_constants): Likewise.
+ (standard_80387_constant_rtx): Likewise.
+ * i386.md (atanxf): Disable for TARGET_128BIT_LONG_LONG
+ (atantf): Disable for !TARGET_128BIT_LONG_LONG
+ (fyl2x_sfxf3, fyl2x_dfxf3): Accept TFmode operands.
+ (fyl2x_xfxf3, fyl2x_tfxf3): Enable/disable as needed.
+ (fscale_sfxf3, fscale_dfxf3): Accept TFmode operands.
+ (fscale_xfxf3, fscale_tfxf3): Enable/disable as needed.
+ (frndinttf2): New.
+ (f2xm1tf2): New.
+ (exp?f2): Use expsf2_tf when needed.
+ (exp?f2_tf): New.
+ (exptf): New.
+
+2003-06-29 Uwe Stieber <uwe@kaos-group.de>
+
+ * config.gcc (sh*-*-kaos*): Put tm_file setting in separate case
+ statement from tmake_file set.
+
2003-06-29 James E Wilson <wilson@tuliptree.org>
* reload.c (find_reloads): Change push_reloads to push_reload in
ChangeLog entries between 2003-06-30T03:45:05Z and the last time everything
passed, on 2003-03-03T21:26:39Z:
--- /Users/regress/tbox/changelog_pass/gcc/ChangeLog Mon Mar 3 13:26:59 2003
+++ gcc/ChangeLog Fri Jun 27 12:19:37 2003
@@ -1,3 +1,348 @@
+2003-06-27 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure.in: Clean up config-lang.in handling. Delete
+ useless assignment to "subdirs".
+ * configure: Regenerate.
+
+2003-06-26 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure.in: Rename 'target_libs' to 'target_libraries'.
+ Remove useless reference to 'target_libs'.
+ * configure: Regenerate.
+
+2003-06-23 Keith Seitz <kseitz@sources.redhat.com>
+
+ * Makefile.tpl: Add maybe-configure-itcl to configure-gdb.
+ * Makefile.in: Regenerate.
+
+2003-06-23 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.def: Introduce flags_to_pass.
+ * Makefile.tpl: Generate BASE_FLAGS_TO_PASS using it.
+ * Makefile.in: Regenerate.
+
+2003-06-23 Hans-Peter Nilsson <hp@bitrange.com>
+
+ * configure.in (noconfigdirs) <cris-*-*>: Disable target-newlib
+ and target-libgloss.
+ <d30v-*-*, fr30-*-*, i960-*-*, m32r-*-*>: Disable gdb.
+ <h8300*-*-*>: Disable libf2c and ${libgcj}.
+ * configure: Regenerate.
+
+2003-06-17 Benjamin Kosnik <bkoz@redhat.com>
+
+ * configure.in: Update testsuite_flags to new location.
+ * configure. Regenerate.
+
+2003-06-18 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Remove BUILD_CC stuff.
+ * Makefile.in: Regenerate.
+
+2003-06-17 Kazu Hirata <kazu@cs.umass.edu>
+
+ * MAINTAINERS (Write After Approval): Remove Andrew Haley.
+
+2003-06-16 Graeme Peterson <gp@qnx.com>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-06-14 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config.guess: Update to 2003-06-12 version.
+ * config.sub: Update to 2003-06-13 version.
+
+2003-06-12 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config.guess: Update to 2003-06-06 version.
+ * config.sub: Update to 2003-06-06 version.
+
+2003-06-11 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
+
+ * configure.in: Don't pass --with-stabs for mips*-sgi-irix6*o32.
+ * configure. Regenerate.
+
+2003-06-10 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure.in: Disable serial configure by default.
+ * configure: Regenerate.
+ * Makefile.tpl: Abolish .NOTPARALLEL.
+ * Makefile.in: Regenerate.
+
+ * Makefile.tpl: Replace {build,host,target}_canonical by
+ {build,host,target}.
+ * Makefile.in: Regenerate.
+
+ * Makefile.tpl: Fix stupid pasto.
+ * Makefile.in: Regenerate.
+
+2003-06-09 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Remove bogus conditional.
+ * Makefile.in: Regenerate.
+
+2003-06-05 Jan Hubicka <jh@suse.cz>
+
+ * Makefile.tpl (profiledbootstrap): New target.
+ * Makefile.in (profiledbootstrap): New target.
+
+2003-06-05 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (Bugzilla only): Add Dara Hazeghi and Andrew
+ Pinski. Remove user names from other bugzilla-only maintainers.
+
+2003-06-03 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Make 'recursive targets' using autogen rather
+ than shell loop. Remove duplicate 'clean' targets and false
+ comments.
+ * Makefile.def: Add systematic dependencies to 'recursive' targets.
+ Add systematic method of specifying missing targets in subdirs.
+ Add copyright boilerplate.
+ * Makefile.in: Regenerate.
+ * configure.in: Add 'recursive targets' to maybe list.
+ * configure: Regenerate.
+
+ * MAINTAINERS: "GNATS only" -> "Bug database only".
+
+ * Makefile.tpl: Rename [+target+] to [+make_target+].
+ * Makefile.def: Rename 'target' to 'make_target'.
+
+2003-05-31 Neil Booth <neil@daikokuya.co.uk>
+
+ * MAINTAINERS: Add self as options handling maintainer.
+
+2003-05-28 Michael Meissner <gnu@the-meissners.org>
+
+ * MAINTAINERS: Remove myself as m32r/v850 maintainer, since it has
+ been too long since I touched those ports.
+
+2003-05-28 DJ Delorie <dj@redhat.com>
+
+ * Makefile.tpl: Make maybe-check-gcc .PHONY.
+ * Makefile.in: Regenerate.
+
+2003-05-21 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
+
+ * configure.in: Use curly braces in the definition of tooldir.
+ * configure: Regenerate.
+
+2003-05-21 DJ Delorie <dj@redhat.com>
+
+ * Makefile.tpl (configure-target-libiberty): Depend only on gcc, not
+ newlib or libgloss.
+ * Makefile.in: Regenerate.
+
+2003-05-21 DJ Delorie <dj@redhat.com>
+
+ * Makefile.tpl: Add missing empty maybe-check-gcc target.
+ * Makefile.in: Regenerate.
+
+2003-05-20 Ian Lance Taylor <ian@airs.com>
+
+ * MAINTAINERS: Update my e-mail address.
+
+2003-05-19 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure.in: Switch more things to use maybe dependencies.
+ * Makefile.tpl: Switch more things to use maybe dependencies.
+ Factor out common code from autogen IF statements.
+ * configure: Regenerate.
+ * Makefile.in: Regenerate.
+
+2003-05-14 Kelley Cook <kelleycook@wideopenwest.com>
+
+ * configure.in: Accept i[3456789]86 for machine type.
+ * configure: Regenerate.
+
+2003-05-18 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure.in: Switch more things to use maybe dependencies.
+ Rearrange a little. Use GCC_TOPLEV_SUBDIRS.
+ * configure: Regenerate.
+ * Makefile.tpl: Switch more things to use maybe dependencies.
+ * Makefile.in: Regenerate.
+
+2003-05-16 Andreas Schwab <schwab@suse.de>
+
+ * Makefile.tpl (install-opcodes): Define.
+ * Makefile.in: Rebuild.
+
+2003-05-13 Andreas Jaeger <aj@suse.de>
+
+ * config.guess: Update to 2003-05-09 version.
+ * config.sub: Update to 2003-05-09 version.
+
+2003-05-13 Michael Eager <eager@mvista.com>
+
+ * configure.in: Correct sed script so that options in quotes are not
+ deleted.
+ * configure: Rebuild.
+
+2003-05-12 Corinna Vinschen <corinna@vinschen.de>
+
+ * configure.in (FLAGS_FOR_TARGET): Remove $$s/newlib/libc/sys/cygwin
+ and $$s/newlib/libc/sys/cygwin32 include paths.
+ * configure: Ditto.
+
+2003-05-12 Michael Meissner <gnu@the-meissners.org>
+
+ * MAINTAINERS: Update my email addresses.
+
+2003-05-06 Eric Botcazou <ebotcazou@libertysurf.fr>
+
+ * config-ml.in: Propagate INSTALL variables.
+
+2003-05-04 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
+
+ * MAINTAINERS: Remove duplicate entries in Write After Approval.
+
+2003-05-02 Chris Demetriou <cgd@broadcom.com>
+
+ * Makefile.tpl: Require "makeinfo" from texinfo 4.2 or later.
+ * Makefile.in: Regenerate.
+
+2003-05-02 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (GNATS only): Add Falk Hueffner.
+
+2003-04-30 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (GNATS only): Add Giovanni Bajo.
+
+2003-04-27 Daniel Jacobowitz <drow@mvista.com>
+
+ * Makefile.tpl: Clean $(BUILD_SUBDIR).
+ * Makefile.in: Regenerated.
+
+2003-04-25 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (Write After Approval): Upgrade myself from
+ GNATS only to write-after-approval. Update my mail address.
+
+2003-04-25 Loren J. Rittle <ljrittle@acm.org>
+
+ (OS Port Maintainers: freebsd): Add myself.
+
+2003-04-22 Mark Mitchell <mark@codesourcery.com>
+
+ * MAINTAINERS (java): Remove Alexandre Petit-Bianco.
+
+2003-04-22 Kean Johnston <jkj@sco.com>
+
+ * MAINTAINERS (SCO ports): Added myself.
+
+2003-04-21 Nathan Sidwell <nathan@codesourcery.com>
+
+ * MAINTAINERS (gcov): Add myself and Jan Hubicka.
+
+2003-04-19 Kean Johnston <jkj@sco.com>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-04-18 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
+
+ * Makefile.tpl (MAKEINFOFLAGS): Default to --split-size=5000000.
+ * Makefile.in: Regenerate.
+
+2003-04-18 Jakub Jelinek <jakub@redhat.com>
+
+ * configure.in (powerpc64*-*-linux*): Remove.
+ * configure: Rebuilt.
+
+2003-04-17 Phil Edwards <pme@gcc.gnu.org>
+
+ * Makefile.tpl (GCC_STRAP_TARGETS): New variable containing all the
+ previous bootstrap targets, plus bubblestrap, quickstrap, cleanstrap,
+ and restrap.
+ * Makefile.in: Regenerate.
+
+2003-04-16 Richard Earnshaw <rearnsha@arm.com>
+
+ * configure.in (arm-*-netbsdelf*): Enable building java libraries.
+ * configure: Regenerated.
+
+2003-04-15 DJ Delorie <dj@redhat.com>
+
+ * MAINTAINERS: Remove myself as windows/cygwin/mingw maintainer.
+
+2003-04-13 Nick Clifton <nickc@redhat.com>
+
+ * config-ml.in: Remove support for --disable-aix removing
+ call-aix multilibs.
+
+2003-04-10 Alexandre Oliva <aoliva@redhat.com>
+
+ * libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on mips*.
+ * */configure: Rebuilt.
+
+2003-04-08 Joel Sherrill <joel@oarcorp.com>
+
+ * MAINTAINERS: Add my email address.
+
+2003-03-17 Olivier Hainque <hainque@act-europe.fr>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-03-14 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES back down.
+ * Makefile.in: Regenerate.
+
+2003-03-14 Michael Chastain <mec@shout.net>
+
+ * Makefile.in: Regenerate with correct Makefile.def.
+
+2003-03-12 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES up. Delete unused
+ Make macro.
+ * Makefile.in: Regenerate.
+ * configure.in: Clean up gxx_include_dir logic.
+ * configure: Regenerate.
+
+2003-03-12 Ansgar Esztermann <ansgar@thphy.uni-duesseldorf.de>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-03-10 Ben Elliston <bje@wasabisystems.com>
+
+ * MAINTAINERS: Update my mail address.
+
+2003-03-09 Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
+
+ * configure.in (gxx_include_dir): Fix typo.
+ * configure: Regenerated.
+
+2003-03-04 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Reindent.
+ * Makefile.in: Regenerate.
+ * configure.in: Reindent. Don't set unused variables.
+ * configure: Regenerate.
+
+2003-03-04 Daniel Jacobowitz <drow@mvista.com>
+
+ * configure.in: Include $(build_tooldir)/sys-include in
+ FLAGS_FOR_TARGET.
+ * configure: Regenerated.
+
+2003-03-04 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Always pass down RANLIB.
+ * Makefile.in: Regenerate.
+
+ * Makefile.tpl: Don't set unused enable_shared, enable_threads macros.
+ * Makefile.in: Regenerate.
+ * configure.in: Remove unused logic relating to --enable-shared
+ and --enable-threads. Remove bogus comments. Remove redundant
+ noconfigdirs.
+ * configure: Regenerate.
+
+ * configure.in: Replace ${libstdcxx_version} by its value.
+ Remove reference to mh-dgux.
+ * configure: Regenerate.
+
2003-03-03 Kevin Buettner <kevinb@redhat.com>
* MAINTAINERS (Write After Approval): Add myself.
--- /Users/regress/tbox/changelog_pass/gcc/gcc/ChangeLog Mon Mar 3 13:27:03 2003
+++ gcc/gcc/ChangeLog Sun Jun 29 20:45:44 2003
@@ -1,21217 +1,21166 @@
-Mon Mar 3 20:45:25 2003 J"orn Rennecke <joern.rennecke@superh.com>
+2003-06-29 James E Wilson <wilson@tuliptree.org>
- * config/sh/sh.h (EXTRA_SPECS): Add subtarget_asm_relax_spec and
- subtarget_asm_isa_spec.
- (SUBTARGET_ASM_RELAX_SPEC, SUBTARGET_ASM_ISA_SPEC): Define.
- (ASM_SPEC): Define as SH_ASM_SPEC.
- (SH_ASM_SPEC): New; take the role of ASM_SPEC, but safe from svr4.h.
- Use subtarget_asm_relax_spec and subtarget_asm_isa_spec.
- * config/sh/elf.h (ASM_SPEC): Use SH_ASM_SPEC.
- (SUBTARGET_ASM_ISA_SPEC): Undef / define.
+ * reload.c (find_reloads): Change push_reloads to push_reload in
+ comment.
+ * reload1.c (eliminate_regs): Likewise.
+ (dump_needs): Delete prototype for deleted function.
- * sh.h (OVERRIDE_OPTIONS): Set default values for align_loops
- and align_jumps if not set.
- Force align_jumps to be at least 2.
- When relaxing, force align_functions to be at least the maximum of
- align_loops, align_jumps and 4.
- * sh.c (find_barrier, barrier_align): Honour align_jumps_log.
- (sh_loop_align): Honour align_loops_log.
+2003-06-29 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
- * sh.md (length attribute): Use prev_nonnote_insn instead of PREV_INSN
- to check for indirect_jump_scratch.
- (indirect_jump_scratch): Add second set.
- * sh.c (output_far_jump): Use prev_nonnote_insn instead of PREV_INSN
- when looking for indirect_jump_scratch.
- Extract scratch register taking new structure of indirect_jump_scratch
- into account.
- (gen_block_redirect): Set INSN_SCOPE for indirect_jump_scratch.
+ * builtin-attrs.def (gcc_diag, gcc_cdiag, gcc_cxxdiag): New
+ format attributes.
+ * c-format.c (enum format_type): Add gcc_diag_format_type,
+ gcc_cdiag_format_type, and gcc_cxxdiag_format_type.
+ (gcc_diag_length_specs, gcc_cdiag_length_specs,
+ gcc_cxxdiag_length_specs, gcc_diag_flag_pairs,
+ gcc_cdiag_flag_pairs, gcc_cxxdiag_flag_pairs, gcc_diag_flag_specs,
+ gcc_cdiag_flag_specs, gcc_cxxdiag_flag_specs, gcc_diag_char_table,
+ gcc_cdiag_char_table, gcc_cxxdiag_char_table): New.
+ (format_types_orig): Add new data.
+ (find_char_info_specifier_index, init_dynamic_diag_info): New
+ functions.
+ (handle_format_attribute): Update to handle new format attributes.
-Mon Mar 3 19:07:21 CET 2003 Jan Hubicka <jh@suse.cz>
+2003-06-29 Aaron W. LaFramboise <awlaframboise@aol.com>
- * calls.c (rtx_for_function_call): Take the address as an argument
- (expand_call): Do not modify the expression.
+ * config/i386/mingw32.h (__GTHREAD_HIDE_WIN32API): Define to 1.
- * toplev.c (rest_of_compilation): Avoid cfg_cleanup calls when not
- optimizing.
+2003-06-29 Dara Hazeghi <dhazeghi@yahoo.com>
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+ * doc/install.texi: Remove install documentation for obsoleted targets
+ i?86-*-sco, i?86-*-sco3.2v4, powerpcle-*-pe, powerpcle-*-winnt,
+ arm-*-aof.
+ Update information about IA64 toolchain, AIX make requirements,
+ and binutils for m68k-*-hpux and *-*-linuxaout targets.
- * config/h8300/h8300.md (*ixorsi3_zext_hi): Restrict to
- TARGET_H8300H and TARGET_H8300S.
+Mon Jun 30 00:50:43 CEST 2003 Jan Hubicka <jh@suse.cz>
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+ * regmove.c (regmove_optimize): Don't try to make src and dst match
+ when they are in different modes.
- * config/h8300/h8300.md (a peephole2): New.
+Sun Jun 29 23:06:32 CEST 2003 Jan Hubicka <jh@suse.cz>
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+ * builtins.c (expand_builtin_mathfn, expand_builtin_mathfn_2): Avoid
+ busy work when builtin is not supported by the backend.
- * config/h8300/h8300.md (*extzv_8_8): Use shorter code when
- operands[0] and operands[1] are different.
+2003-06-29 Zdenek Dvorak <rakdver@atrey.karlin.mff.cuni.cz>
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+ * loop.c (count_one_set): Fix detection of registers set in more
+ than one basic block.
- * reload1.c (reload_cse_move2add): Remove variable success.
+2003-06-29 Andreas Jaeger <aj@suse.de>
-2003-03-02 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+ * target-def.h: Remove usage of OBJECT_FORMAT_ROSE.
+ * system.h: Poison OBJ_FORMAT_ROSE.
+ * doc/tm.texi (Macros for Initialization): Remove documentatin of
+ OBJECT_FORMAT_ROSE.
+ * config/rs6000/lynx.h: Remove undef of OBJECT_FORMAT_ROSE.
+ * collect2.c: Remove usage of OBJECT_FORMAT_ROSE.
- * ggc-common.c (ggc_rlimit_bound): Cast RLIM_INFINITY to avoid
- warnings.
+2003-06-29 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
-2003-03-02 Richard Henderson <rth@redhat.com>
+ * pa.c (update_total_code_bytes): New function.
+ (last_address): Number of bytes output for a function and its
+ associated thunks.
+ (compute_frame_size): Use BITS_PER_UNIT.
+ (pa_output_function_epilogue): Compute last_address. Use
+ update_total_code_bytes.
+ (output_lbranch): Handle long branch on portable runtime.
+ (attr_length_millicode_call, attr_length_call,
+ attr_length_indirect_call): Only use total_code_bytes for calls in
+ the text section.
+ (output_call): Only use an indirect call sequence when the target is
+ not local.
+ (pa_asm_output_mi_thunk): Handle updating of total_code_bytes. Improve
+ test to determine when an IA-relative branch can be used. Add various
+ long branch sequences. Avoid using an indirect branch on all ports
+ except SOM.
+
+2003-06-29 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * expr.c (clear_by_pieces): Fix prototype.
+
+2003-06-29 Andreas Jaeger <aj@suse.de>
+
+ * cse.c: Convert prototypes to ISO C90.
+ * cselib.c: Likewise.
+ * cselib.h: Likewise.
+ * dbxout.c: Likewise.
+ * debug.c: Likewise.
+ * df.c: Likewise.
+ * df.h: Likewise.
+ * dojump.c: Likewise.
+ * doloop.c: Likewise.
+ * dominance.c: Likewise.
+ * dwarf2asm.c: Likewise.
+ * dwarf2out.c: Likewise.
+ * dwarf2out.h: Likewise.
+ * dwarfout.c: Likewise.
+ * except.c: Likewise.
+ * except.h: Likewise.
+ * emit-rtl.c: Likewise.
+ * et-forest.c: Likewise.
+ * et-forest.h: Likewise.
+ * except.c: Likewise.
+ * explow.c: Likewise.
+ * expmed.c: Likewise.
+ * expr.c: Likewise.
+ * expr.h: Likewise.
- * configure.in (HAVE_AS_LTOFFX_LDXMOV_RELOCS): New ia64 test.
- * config.in, configure: Rebuild.
- * config/ia64/ia64.c (ia64_ld_address_bypass_p): Accept lo_sum.
- * config/ia64/ia64.md (load_symptr): Use high/lo_sum for the
- paired ldtoffx and ldxmov annotations.
- (load_symptr_internal1): Remove.
- (load_symptr_high, load_symptr_low): New.
+2003-06-29 Kazu Hirata <kazu@cs.umass.edu>
-2003-03-02 Neil Booth <neil@daikokuya.co.uk>
+ * alloc-pool.c: Fix comment formatting.
+ * bitmap.c: Likewise.
+ * bitmap.h: Likewise.
+ * bt-load.c: Likewise.
+ * builtins.c: Likewise.
+ * caller-save.c: Likewise.
+ * cfganal.c: Likewise.
+ * cfgrtl.c: Likewise.
+ * collect2.c: Likewise.
+ * cse.c: Likewise.
+ * df.c: Likewise.
+ * diagnostic.c: Likewise.
+ * dwarf2out.c: Likewise.
+ * dwarfout.c: Likewise.
+ * expmed.c: Likewise.
+ * final.c: Likewise.
+ * flags.h: Likewise.
+ * fold-const.c: Likewise.
+ * gcc.c: Likewise.
+ * gcov-io.h: Likewise.
+ * gcov.c: Likewise.
+ * genattrtab.c: Likewise.
+ * genautomata.c: Likewise.
+ * libgcov.c: Likewise.
+ * mips-tfile.c: Likewise.
+ * optabs.c: Likewise.
+ * prefix.c: Likewise.
+ * rtlanal.c: Likewise.
+ * stmt.c: Likewise.
+ * stor-layout.c: Likewise.
+ * toplev.c: Likewise.
+ * varasm.c: Likewise.
+ * vmsdbgout.c: Likewise.
- * c-incpath.c (add_path): Fix sysp assignment.
+2003-06-29 Kazu Hirata <kazu@cs.umass.edu>
-2003-03-02 Kurt Garloff <garloff@suse.de>
+ * expr.c (emit_single_push_insn): If padding is needed
+ downward, adjust the stack pointer first, and then store the
+ data into the stack location using an offset.
- * params.def: Introduce parameter max-inline-insns-rtl for
- a separate limit for the RTL inliner.
- * params.h: Likewise.
- * integrate.c (function_cannot_inline_p): Use it.
- * toplev.c (decode_f_option): Set multiple parameters
- controlling inlining with -finline-limit.
- * params.def: Fix orthographic and typographic errors.
- * doc/invoke.texi: Document parameters controlling inlining
- and the way -finline-limit sets multiple of them.
+2003-06-29 Andreas Jaeger <aj@suse.de>
- * tree.h (struct tree_decl): Introduce inlined_function_flag,
- recording whether the function became eligible for inlining
- by a compiler flag rather than the declaration.
- Provide DID_INLINE_FUNC macro to access it.
- * c-decl.c (grokdeclarator): Set DID_INLINE_FUNC.
- * cp/decl.c (grokfndecl): Likewise.
- * toplev.c (rest_of_compilation): Likewise.
- * cp/optimize (maybe_clone_body): Copy DID_INLINE_FUNC.
- * print-tree.c (print_node): Report it.
- * params.def: Introduce new max-inline-insns-auto limit.
- * params.h: Likewise.
- * tree-inline.c (inlinable_function_p): Apply it to functions
- with DID_INLINE_FUNC set.
- * toplev.c (decode_f_option): Initialize it from -finline-limit
- value.
- * doc/invoke.texi: Document new parameter.
+ * collect2.h: Convert prototypes to ISO C90.
+ * collect2.c: Likewise.
+ * conflict.c: Likewise.
+ * coverage.c: Likewise.
+ * convert.h: Likewise.
+ * convert.c: Likewise.
-2003-03-02 Geoffrey Keating <geoffk@apple.com>
+2003-06-29 Nathan Sidwell <nathan@codesourcery.com>
- * fix-header.c (read_scan_file): Don't reference simplify_path.
+ * c-decl.c (c_init_decl_processing): Use a location_t. Set input
+ filename to <internal>.
+ * tree.c (make_node): Just copy the current location.
-2003-03-02 Stephane Carrez <stcarrez@nerim.fr>
+2003-06-29 Eric Botcazou <ebotcazou@libertysurf.fr>
- * config/m68hc11/m68hc11.c (m68hc11_override_options): Don't enable
- min/max instructions by default as may result in reload errors.
+ PR optimization/11210
+ * fold-const (decode_field_reference): Revert 2003-06-26 patch.
-2003-03-02 Stephane Carrez <stcarrez@nerim.fr>
+2003-06-29 Neil Booth <neil@daikokuya.co.uk>
- * config/m68hc11/m68hc11.md ("mulqi3"): Allow address register to
- avoid reload problems; define split for it.
+ * toplev.c (flag_dummy): Remove.
+ (f_options): Restore flag pointers.
-2003-03-02 Stephane Carrez <stcarrez@nerim.fr>
+2003-06-29 David Edelsohn <edelsohn@gnu.org>
- * config/m68hc11/m68hc11.c (m68hc11_shift_operator): New function.
- * config/m68hc11/m68hc11-protos.h (m68hc11_shift_operator): Declare.
- * config/m68hc11/m68hc11.h (PREDICATE_CODES): Register.
- * config/m68hc11/m68hc11.md ("rotrhi3", "rotlhi3"): New patterns for
- rotatert and rotate.
- ("rotrhi3_const", "rotlhi3_const"): Rename of old 'rotrhi3' insns.
- ("*rotrhi3", "*rotlhi3"): New insn pattern for non-const rotatert.
- ("*rotrhi3_addr"): New split for shift insns on address register.
- ("*lshrhi3", "*ashrhi3", "*ashlhi3_2"): Use new split.
- * config/m68hc11/larith.asm (___rotlhi3): New asm function.
- (___rotrhi3): Likewise.
- * config/m68hc11/t-m68hc11-gas (LIB1ASMFUNCS): Build them.
+ * config/rs6000/rs6000.c (processor_target_table): Add 970.
+ * config.gcc: Add 970.
-2003-03-02 Neil Booth <neil@daikokuya.co.uk>
+2003-06-29 Kazu Hirata <kazu@cs.umass.edu>
- * toplev.c (aux_base_name): Moved from toplev.h.
- (filename): Constify.
- (lang_dependent_init): Don't duplicate name.
- (process_options): Set aux_base_name here, not...
- (do_compile): ...here. Change protoype.
- (toplev_main): Move some code from do_compile.
- * toplev.h: Remove aux_base_name.
+ * dwarf2out.c (add_AT_string): Replace ggc_alloc_string (X,
+ -1) with ggc_strdup.
+ * stmt.c (expand_asm_operands): Likewise.
+ * config/rs6000/rs6000.md (builtin_setjmp_receiver): Likewise.
-2003-03-02 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-28 Kazu Hirata <kazu@cs.umass.edu>
- * config/h8300/h8300-protos.h: Add a prototype for
- iorxor_operator.
- * config/h8300/h8300.c (print_operand): Handle 'c'.
- (iorxor_operator): New.
- * config/h8300/h8300.h (PREDICATE_CODES): Add iorxor_operator.
- * config/h8300/h8300.md (*iorhi3_zext): Remove.
- (*iorsi3_zexthi): Likewise.
- (*iorsi3_zextsi): Likewise.
- (*xorhi3_zextqi): Likewise.
- (*xorsi3_zexthi): Likewise.
- (*xorsi3_zextsi): Likewise.
- (*ixorhi3_zext): New.
- (*ixorsi3_zext_qi): Likewise.
- (*ixorsi3_zext_hi): Likewise.
+ * config/ip2k/ip2k.c (ip2k_reorg): Use INSN_P instead of its
+ definition.
-2003-03-02 Neil Booth <neil@daikokuya.co.uk>
+2003-06-29 Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
- * c-incpath.c (remove_component_p, simplify_path): Move back to
- cppfiles.c.
- (remove_duplicates): Use cpp_simplify_path.
- * c-incpath.h (simplify_path): Remove.
- * c-lex.c: Don't include c-incpath.h.
- (init_c_lex): Remove simplify_path.
- * cppfiles.c (remove_component_p, cpp_simplify_path): Restore.
- (find_or_create_entry, validate_pch): Revert.
+ * opts.c: Include insn-attr.h.
+ * Makefile.in (opts.o): Depend on INSN_ATTR_H.
-2003-03-02 Ashif Harji <asharji@uwaterloo.ca>
+2003-06-27 J"orn Rennecke <joern.rennecke@superh.com>
- * gcc.c (default_compilers): Add -no-integrated-cpp flag to invoke
- an external cpp during compilation.
- (option_map): Likewise.
- * objc/lang-specs.h (default_compilers): Similarly.
- * doc/invoke.texi: Document -no-integrated-cpp flag.
+ * flow.c (propagate_one_insn): Use proper test for a register
+ being part of the return value.
-2003-03-02 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-28 Kazu Hirata <kazu@cs.umass.edu>
- * config/h8300/h8300.md (zero_extendqisi2): Change to an
- expander.
- (*zero_extendqisi2_h8300): New.
- (*zero_extendqisi2_h8300hs): New.
- (two splitters): New.
+ * config/avr/avr.c: Fix a comment typo.
-2003-03-02 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+2003-06-28 Kazu Hirata <kazu@cs.umass.edu>
- * fp-bit.h (float_to_usi): Fix condition wrapping prototype.
+ * config/avr/avr-protos.h: Replace avr_simplify_comparision_p
+ with avr_simplify_comparison_p.
+ * config/avr/avr.c: Likewise.
-2003-03-01 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-28 Kazu Hirata <kazu@cs.umass.edu>
- * config/h8300/h8300.md (a peephole2): Remove dead code.
+ * builtins.c: Follow spelling conventions.
+ * cgraph.c: Likewise.
+ * cpplex.c: Likewise.
+ * config/arm/arm.c: Likewise.
+ * config/arm/iwmmxt.md: Likewise.
+ * config/c4x/c4x-modes.def: Likewise.
+ * config/c4x/c4x.c: Likewise.
+ * config/c4x/c4x.h: Likewise.
+ * config/c4x/c4x.md: Likewise.
+ * config/i386/i386-interix.h: Likewise.
+ * config/mips/mips.h: Likewise.
-2003-03-01 Roger Sayle <roger@eyesopen.com>
+2003-06-28 Neil Booth <neil@daikokuya.co.uk>
- PR c++/9367
- * builtin-types.def (DEF_FUNCTION_TYPE_VAR_3): New macro.
- (BT_FN_INT_CONST_STRING_VALIST_ARG,
- BT_FN_INT_STRING_CONST_STRING_VALIST_ARG,
- BT_FN_INT_CONST_STRING_CONST_STRING_VALIST_ARG,
- BT_FN_INT_STRING_SIZE_CONST_STRING_VALIST_ARG,
- BT_FN_INT_STRING_CONST_STRING_VAR,
- BT_FN_INT_CONST_STRING_CONST_STRING_VAR,
- BT_FN_INT_STRING_SIZE_CONST_STRING_VAR): New built-in types.
- * builtin-attrs.def (ATTR_NONNULL_1, ATTR_NONNULL_2,
- ATTR_NONNULL_3): Also include the nothrow attribute.
- (sprintf, scanf, sscanf, vprintf, vsprintf, snprintf,
- vsnprintf, vscanf, vsscanf): Don't define attributes here.
- * builtins.def (putchar, puts): Make full C89 built-ins.
- (snprintf, sprintf, scanf, sscanf, vprintf, vscanf,
- vsscanf, vsnprintf, vsprintf): New built-ins.
- * c-common.c (c_common_nodes_and_builtins): Handle new macro
- DEF_FUNCTION_TYPE_VAR_3.
+ * config/m68k/m68k.h (TARGET_CPU_CPP_BUILTINS): Predicate
+ __mc68020__ on TARGET_68020.
- * doc/extend.texi: Document these new built-in functions.
+2003-06-28 Kazu Hirata <kazu@cs.umass.edu>
-2003-03-01 Kazu Hirata <kazu@cs.umass.edu>
+ * config/h8300/h8300.c: Fix a comment typo.
- * config/h8300/h8300.md (a peephole2): New.
+2003-06-28 Nathan Sidwell <nathan@codesourcery.com>
-2003-03-01 Richard Earnshaw <rearnsha@arm.com>
+ * c-parse.in (yylexstring): Use a location_t.
- * predict.c (estimate_bb_frequencies): Correctly set
- real_values_initialized after initialization.
+ * diagnostic.h (diagnostic_set_info): Replace file and lineno
+ parameters with a location_t.
+ * diagnostic.c (diagnostic_set_info): Replace file and lineno
+ parameters with a location_t.
+ (inform, warning, pedwarn, error, sorry, fatal_error,
+ internal_error, warning_with_decl, pedwarn_with_decl,
+ error_with_decl): Adjust.
+ * c-error.c (pedwarn_c99): Adjust.
+ * c-format.c (status_warning): Adjust.
+ * rtl-error.c (file_and_line_for_asm): Rename to ...
+ (location_for_asm): Return a location_t.
+ (diagnostic_for_asm): Adjust.
-2003-03-01 Neil Booth <neil@daikokuya.co.uk>
+2003-06-28 Neil Booth <neil@daikokuya.co.uk>
- * Makefile.in (C_AND_OBJC_OBJS, c-incpath.o, c-lex.o, LIBCPP_OBJS,
- cppinit.o, cppdefault.o, fix-header): Update.
- * c-incpath.c: New file.
- * c-incpath.h: New file.
- * c-lex.c: Include c-incpath.h.
- (init_c_lex): Register path simplifier.
- * c-opts.c: Include cppdefault.h and c-incpath.h.
- (TARGET_SYSTEM_ROOT, verbose, iprefix, sysroot, std_inc,
- std_cxx_inc, quote_chain_split, add_prefixed_path): New.
- (COMMAND_LINE_OPTIONS): Add more options from cpplib.
- (missing_arg, c_common_decode_option): Handle them.
- (c_common_post_options): Register include chains.
- (print_help): Update.
- * cppdefault.h (struct default include): Update.
- Move some macros to ...
- * cppdefault.c: ... here.
- (cpp_include_defaults): Add extra field add_sysroot.
- * cppfiles.c (include_file, search_from, find_or_create_entry,
- cpp_included, find_include_file, remap_filename): Update for
- renaming of search_path to cpp_path, and of the chain headers.
- (remove_component_p, _cpp_simplify_pathname): Move to c-incpath.c.
- * cpphash.h (struct search_path): Move to cpplib.h.
- (struct cpp_buffer, struct cpp_reader): Update.
- (_cpp_simplify_pathname): Remove.
- * cppinit.c: Don't include prefix.h and cppdefault.h.
- (INO_T_EQ, INO_T_COPY, path_include, append_include_chain,
- remove_dup_dir, remove_dup_nonsys_dirs, remove_dup_dirs,
- init_standard_includes, BRACKET, SYSTEM, AFTER, no_dir,
- no_pth, cpp_handle_options): Remove.
- (struct pending_option): Remove chain members.
- (cpp_destroy, cpp_read_main_file, COMMAND_LINE_OPTIONS,
- cpp_handle_option): Update.
- * cpplib.h (struct cpp_path, cpp_set_include_chains): New.
- (struct cpp_options): Remove quote_include, bracket_include,
- include_prefix, include_prefix_len, verbose, ignore_srcdir,
- no_standard_includes, no_standard_cplusplus_includes.
- (struct cpp_callbacks): Add simplify_path.
- (cpp_handle_options): Remove.
- * fix-header.c: Include c-incpath.h.
- (read_scan_file): Update to use c-incpath functionality.
- * doc/passes.texi: Update.
+ * cpptrad.c (skip_macro_block_comment): New.
+ (copy_comment): Use it if appropriate.
-2003-03-01 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-28 Kazu Hirata <kazu@cs.umass.edu>
- * config/h8300/h8300.c (bit_operand): Accept MEM only if it
- satisfies EXTRA_CONSTRAINT 'U'.
+ * gcse.c (compute_ld_motion_mems): Use INSN_P instead of its
+ definition.
+ (store_killed_in_insn): Likewise.
+ * print-rtl.c (print_rtx): Likewise.
+ * config/frv/frv.c (frv_final_prescan_insn): Likewise.
+ * config/m68hc11/m68hc11.c (dead_register_here): Likewise.
+ (m68hc11_reassign_regs): Likewise.
+ (m68hc11_reorg): Likewise.
+
+2003-06-28 Gabriel Dos Reis <gdr@integrable-solutions.net>
+
+ * diagnostic.c (output_integer_with_precision): New macro.
+ (output_format): Use it. Handle more format specifiers.
+ (output_long_decimal): Remove.
+ (output_unsigned_decimal): Likewise.
+ (output_long_unsigned_decimal): Likewise.
+ (output_octal): Likewise.
+ (output_long_octal): Likewise.
+ (output_hexadecimal): Likewise.
+ (output_long_hexadecimal): Likewise.
+ (output_long_long_decimal): Likewise.
-2003-03-01 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-28 Andreas Schwab <schwab@suse.de>
- * config/h8300/h8300.md (*tst_extzv_bitqi_1_n): Take a scratch
- register.
- (*tst_extzv_memqi_1_n): Change to a splitter.
- (a peephole2): Update.
+ * config/ia64/ia64.md: Follow recent emit_note API change.
-2003-03-01 Richard Earnshaw <rearnsha@arm.com>
+2003-06-28 Nathan Sidwell <nathan@codesourcery.com>
- * predict.c (estimate_bb_frequencies): Initialize the sreal
- constants once per compilation.
+ * c-parse.in (%union): Replace filename & lineno with location.
+ (save_filename, save_lineno): Remove.
+ (save_location): New.
+ (fndef, old_style_parm_decls_1, lineno_datadecl, lineno_decl,
+ nested_function, notype_nested_function, if_prefix, lineno_stmt,
+ lineno_label, label): Adjust.
-2003-02-28 Richard Henderson <rth@redhat.com>
+2003-06-28 Jakub Jelinek <jakub@redhat.com>
- * toplev.c (flag_eliminate_unused_debug_types): Enable by default.
+ * builtins.c (c_strlen): Add only_value argument.
+ Handle COND_EXPR and COMPOUND_EXPR.
+ (expand_builtin_strlen): Optimize also strlen (i++ ? "foo" : "bar").
+ Adjust c_strlen callers.
+ (expand_builtin_strcpy, expand_builtin_strncpy,
+ expand_builtin_strcmp, expand_builtin_strncmp,
+ expand_builtin_fputs, expand_builtin_sprintf,
+ fold_builtin): Adjust c_strlen callers.
-2003-02-28 scott snyder <snyder@fnal.gov>
+2003-06-28 Josef Zlomek <zlomekj@suse.cz>
- * flags.h: Add flag_eliminate_unused_debug_types.
- * toplev.c: Add flag_eliminate_unused_debug_types.
- (f_options): Add -feliminate-unused-debug-types.
- * dwarf2out.c (struct file_table): Add emitted member.
- (splice_child_die): Fix the parent pointer for the child being
- spliced.
- (lookup_filename): Maintain file_table.emitted array. Don't
- output .file directive here.
- (maybe_emit_file): (new)
- (init_file_table): Set up file_table.emitted.
- (dwarf2out_source_line): Use maybe_emit_file.
- (dwarf2out_start_source_file): Use maybe_emit_file.
- (dwarf2out_init): Use maybe_emit_file.
- (prune_unused_types_walk_attribs): (new)
- (prune_unused_types_mark): (new)
- (prune_unused_types_walk): (new)
- (prune_unused_types_prune): (new)
- (prune_unused_types): (new)
- (dwarf2out_finish): Call prune_unused_types if
- flag_eliminate_unused_debug_types is set.
- * doc/invoke.texi (Option Summary): Add
- -feliminate-unused-debug-types.
- (Debugging Options): Likewise.
+ * bb-reorder.c (find_traces_1_round): Do not send basic block
+ to next round when we are in the last round.
-2003-02-28 Geoffrey Keating <geoffk@apple.com>
+2003-06-28 Neil Booth <neil@daikokuya.co.uk>
- * doc/invoke.texi: Change .pch to .gch.
- * cppfiles.c (open_file_pch): Likewise.
- * gcc.c (default_compilers): Likewise.
+ * Makefile.in: Update.
+ * opts.c: Include tm_p.h.
+ (handle_options): Make static.
+ (decode_options): Copied from toplev.c.
+ * opts.h (decode_options): New.
+ * toplev.c (parse_options_and_default_flags): Move most to opts.c,
+ some to...
+ (general_init): ...here.
+ (toplev_main): Use decode_options instead.
+ * toplev.h (save_argc, save_argv): New.
-2003-02-28 Aldy Hernandez <aldyh@redhat.com>
+2003-06-28 Kazu Hirata <kazu@cs.umass.edu>
- * floatlib.c: Remove.
+ * explow.c (find_next_ref): Remove.
+ * rtl.h: Remove the prototype for find_next_ref.
-2003-02-28 Jason Merrill <jason@redhat.com>
+2003-06-27 Roger Sayle <roger@eyesopen.com>
- * stor-layout.c (variable_size): Leave a "minus 1" outside the
- SAVE_EXPR.
+ * config/alpha/alpha.md (anonymous define_split): Adjust emit_note
+ call to match recent API change.
-2003-02-28 David Edelsohn <edelsohn@gnu.org>
+2003-06-27 Zack Weinberg <zack@codesourcery.com>
- * config/rs6000/power4.md: Add compare bypass.
+ * dbxout.c (flag_debug_only_used_symbols): Delete redundant
+ declaration.
-2003-02-28 Jason Thorpe <thorpej@wasabisystems.com>
+ * c-format.c (check_format_string, get_constant)
+ * cfgrtl.c (rtl_split_edge):
+ Mark the definition static, matching the forward declaration.
- * config/netbsd.h: Update copyright years.
- (NETBSD_CPP_SPEC): Define _REENTRANT and _PTHREADS if
- -pthread is specified on the command line.
**** TRUNCATED ****
-------------- next part --------------
--
Geoffrey Keating <geoffk@apple.com>
(via an automated GCC regression-testing script.)
More information about the Gcc-regression
mailing list