21 GCC regressions, 0 new, with your patch on 2003-06-26T19:31:39Z.
GCC regression checker
geoffk@apple.com
Fri Jun 27 00:48:00 GMT 2003
With your recent patch, GCC has some regression test failures, which
used to pass. There are 0 new failures, and 21
failures that existed before and after that patch; 0 failures
have been fixed.
The old failures, which were not fixed or introduced by your patch, are:
native g77.sum g77.f-torture/execute/980520-1.f
native gcc.sum gcc.c-torture/execute/20000412-3.c
native gcc.sum gcc.dg/pch/global-1.c
native gcc.sum gcc.dg/pch/inline-1.c
native gcc.sum gcc.dg/warn-1.c
native objc.sum objc/execute/accessing_ivars.m
native objc.sum objc/execute/bycopy-2.m
native objc.sum objc/execute/enumeration-1.m
native objc.sum objc/execute/enumeration-2.m
native objc.sum objc/execute/formal_protocol-1.m
native objc.sum objc/execute/formal_protocol-2.m
native objc.sum objc/execute/formal_protocol-3.m
native objc.sum objc/execute/formal_protocol-4.m
native objc.sum objc/execute/formal_protocol-7.m
native objc.sum objc/execute/initialize.m
native objc.sum objc/execute/load-2.m
native objc.sum objc/execute/load-3.m
native objc.sum objc/execute/load.m
native objc.sum objc/execute/no_clash.m
native objc.sum objc/execute/object_is_class.m
native objc.sum objc/execute/object_is_meta_class.m
For more information, see http://gcc.gnu.org/regtest/.
-------------- next part --------------
ChangeLog entries since last run on 2003-06-26T14:36:47Z:
--- /Users/regress/tbox/changelog_mail/gcc/gcc/ChangeLog Thu Jun 26 07:37:26 2003
+++ gcc/gcc/ChangeLog Thu Jun 26 12:32:15 2003
@@ -1,5 +1,15 @@
2003-06-26 Kazu Hirata <kazu@cs.umass.edu>
+ * config/h8300/h8300.c (compute_a_rotate_length): Fix the
+ references to the amount of a rotation.
+
+2003-06-26 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * config/sh/coff.h: Don't include dbxcoff.h.
+ * config.gcc: List it here.
+
+2003-06-26 Kazu Hirata <kazu@cs.umass.edu>
+
* postreload.c (reload_cse_simplify_set): Call cselib_lookup
earlier. Don't check if SRC is a constant.
--- /Users/regress/tbox/changelog_mail/gcc/gcc/cp/ChangeLog Thu Jun 26 07:37:33 2003
+++ gcc/gcc/cp/ChangeLog Thu Jun 26 12:32:19 2003
@@ -1,3 +1,8 @@
+2003-06-26 Nathan Sidwell <nathan@codesourcery.com>
+
+ * call.c (build_op_delete_call): Use strip_array_call. Correct
+ error message to say 'delete' or 'delete[]'.
+
2003-06-26 Giovanni Bajo <giovannibajo@libero.it>
PR c++/8266
--- /Users/regress/tbox/changelog_mail/gcc/libiberty/ChangeLog Sun Jun 22 09:47:16 2003
+++ gcc/libiberty/ChangeLog Thu Jun 26 12:32:23 2003
@@ -1,3 +1,7 @@
+2003-06-26 H.J. Lu <hongjiu.lu@intel.com>
+
+ * testsuite/demangle-expected: Add more GNU V3 testcases.
+
2003-06-22 Zack Weinberg <zack@codesourcery.com>
* safe-ctype.c: Use HOST_CHARSET_ASCII and HOST_CHARSET_EBCDIC,
--- /Users/regress/tbox/changelog_mail/gcc/libstdc++-v3/ChangeLog Thu Jun 26 02:46:01 2003
+++ gcc/libstdc++-v3/ChangeLog Thu Jun 26 12:32:24 2003
@@ -1,3 +1,9 @@
+2003-06-26 Nathan C. Myers <ncm-nospam@cantrip.org>
+ Paolo Carlini <pcarlini@unitus.it>
+
+ * testsuite/performance/filebuf_copy.cc: New, testing char
+ by char file copy.
+
2003-06-26 Paolo Carlini <pcarlini@unitus.it>
Nathan C. Myers <ncm-nospam@cantrip.org>
ChangeLog entries between 2003-06-26T14:36:47Z and the last time everything
passed, on 2003-03-03T21:26:39Z:
--- /Users/regress/tbox/changelog_pass/gcc/ChangeLog Mon Mar 3 13:26:59 2003
+++ gcc/ChangeLog Mon Jun 23 15:28:44 2003
@@ -1,3 +1,336 @@
+2003-06-23 Keith Seitz <kseitz@sources.redhat.com>
+
+ * Makefile.tpl: Add maybe-configure-itcl to configure-gdb.
+ * Makefile.in: Regenerate.
+
+2003-06-23 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.def: Introduce flags_to_pass.
+ * Makefile.tpl: Generate BASE_FLAGS_TO_PASS using it.
+ * Makefile.in: Regenerate.
+
+2003-06-23 Hans-Peter Nilsson <hp@bitrange.com>
+
+ * configure.in (noconfigdirs) <cris-*-*>: Disable target-newlib
+ and target-libgloss.
+ <d30v-*-*, fr30-*-*, i960-*-*, m32r-*-*>: Disable gdb.
+ <h8300*-*-*>: Disable libf2c and ${libgcj}.
+ * configure: Regenerate.
+
+2003-06-17 Benjamin Kosnik <bkoz@redhat.com>
+
+ * configure.in: Update testsuite_flags to new location.
+ * configure. Regenerate.
+
+2003-06-18 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Remove BUILD_CC stuff.
+ * Makefile.in: Regenerate.
+
+2003-06-17 Kazu Hirata <kazu@cs.umass.edu>
+
+ * MAINTAINERS (Write After Approval): Remove Andrew Haley.
+
+2003-06-16 Graeme Peterson <gp@qnx.com>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-06-14 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config.guess: Update to 2003-06-12 version.
+ * config.sub: Update to 2003-06-13 version.
+
+2003-06-12 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config.guess: Update to 2003-06-06 version.
+ * config.sub: Update to 2003-06-06 version.
+
+2003-06-11 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
+
+ * configure.in: Don't pass --with-stabs for mips*-sgi-irix6*o32.
+ * configure. Regenerate.
+
+2003-06-10 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure.in: Disable serial configure by default.
+ * configure: Regenerate.
+ * Makefile.tpl: Abolish .NOTPARALLEL.
+ * Makefile.in: Regenerate.
+
+ * Makefile.tpl: Replace {build,host,target}_canonical by
+ {build,host,target}.
+ * Makefile.in: Regenerate.
+
+ * Makefile.tpl: Fix stupid pasto.
+ * Makefile.in: Regenerate.
+
+2003-06-09 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Remove bogus conditional.
+ * Makefile.in: Regenerate.
+
+2003-06-05 Jan Hubicka <jh@suse.cz>
+
+ * Makefile.tpl (profiledbootstrap): New target.
+ * Makefile.in (profiledbootstrap): New target.
+
+2003-06-05 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (Bugzilla only): Add Dara Hazeghi and Andrew
+ Pinski. Remove user names from other bugzilla-only maintainers.
+
+2003-06-03 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Make 'recursive targets' using autogen rather
+ than shell loop. Remove duplicate 'clean' targets and false
+ comments.
+ * Makefile.def: Add systematic dependencies to 'recursive' targets.
+ Add systematic method of specifying missing targets in subdirs.
+ Add copyright boilerplate.
+ * Makefile.in: Regenerate.
+ * configure.in: Add 'recursive targets' to maybe list.
+ * configure: Regenerate.
+
+ * MAINTAINERS: "GNATS only" -> "Bug database only".
+
+ * Makefile.tpl: Rename [+target+] to [+make_target+].
+ * Makefile.def: Rename 'target' to 'make_target'.
+
+2003-05-31 Neil Booth <neil@daikokuya.co.uk>
+
+ * MAINTAINERS: Add self as options handling maintainer.
+
+2003-05-28 Michael Meissner <gnu@the-meissners.org>
+
+ * MAINTAINERS: Remove myself as m32r/v850 maintainer, since it has
+ been too long since I touched those ports.
+
+2003-05-28 DJ Delorie <dj@redhat.com>
+
+ * Makefile.tpl: Make maybe-check-gcc .PHONY.
+ * Makefile.in: Regenerate.
+
+2003-05-21 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
+
+ * configure.in: Use curly braces in the definition of tooldir.
+ * configure: Regenerate.
+
+2003-05-21 DJ Delorie <dj@redhat.com>
+
+ * Makefile.tpl (configure-target-libiberty): Depend only on gcc, not
+ newlib or libgloss.
+ * Makefile.in: Regenerate.
+
+2003-05-21 DJ Delorie <dj@redhat.com>
+
+ * Makefile.tpl: Add missing empty maybe-check-gcc target.
+ * Makefile.in: Regenerate.
+
+2003-05-20 Ian Lance Taylor <ian@airs.com>
+
+ * MAINTAINERS: Update my e-mail address.
+
+2003-05-19 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure.in: Switch more things to use maybe dependencies.
+ * Makefile.tpl: Switch more things to use maybe dependencies.
+ Factor out common code from autogen IF statements.
+ * configure: Regenerate.
+ * Makefile.in: Regenerate.
+
+2003-05-14 Kelley Cook <kelleycook@wideopenwest.com>
+
+ * configure.in: Accept i[3456789]86 for machine type.
+ * configure: Regenerate.
+
+2003-05-18 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure.in: Switch more things to use maybe dependencies.
+ Rearrange a little. Use GCC_TOPLEV_SUBDIRS.
+ * configure: Regenerate.
+ * Makefile.tpl: Switch more things to use maybe dependencies.
+ * Makefile.in: Regenerate.
+
+2003-05-16 Andreas Schwab <schwab@suse.de>
+
+ * Makefile.tpl (install-opcodes): Define.
+ * Makefile.in: Rebuild.
+
+2003-05-13 Andreas Jaeger <aj@suse.de>
+
+ * config.guess: Update to 2003-05-09 version.
+ * config.sub: Update to 2003-05-09 version.
+
+2003-05-13 Michael Eager <eager@mvista.com>
+
+ * configure.in: Correct sed script so that options in quotes are not
+ deleted.
+ * configure: Rebuild.
+
+2003-05-12 Corinna Vinschen <corinna@vinschen.de>
+
+ * configure.in (FLAGS_FOR_TARGET): Remove $$s/newlib/libc/sys/cygwin
+ and $$s/newlib/libc/sys/cygwin32 include paths.
+ * configure: Ditto.
+
+2003-05-12 Michael Meissner <gnu@the-meissners.org>
+
+ * MAINTAINERS: Update my email addresses.
+
+2003-05-06 Eric Botcazou <ebotcazou@libertysurf.fr>
+
+ * config-ml.in: Propagate INSTALL variables.
+
+2003-05-04 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
+
+ * MAINTAINERS: Remove duplicate entries in Write After Approval.
+
+2003-05-02 Chris Demetriou <cgd@broadcom.com>
+
+ * Makefile.tpl: Require "makeinfo" from texinfo 4.2 or later.
+ * Makefile.in: Regenerate.
+
+2003-05-02 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (GNATS only): Add Falk Hueffner.
+
+2003-04-30 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (GNATS only): Add Giovanni Bajo.
+
+2003-04-27 Daniel Jacobowitz <drow@mvista.com>
+
+ * Makefile.tpl: Clean $(BUILD_SUBDIR).
+ * Makefile.in: Regenerated.
+
+2003-04-25 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (Write After Approval): Upgrade myself from
+ GNATS only to write-after-approval. Update my mail address.
+
+2003-04-25 Loren J. Rittle <ljrittle@acm.org>
+
+ (OS Port Maintainers: freebsd): Add myself.
+
+2003-04-22 Mark Mitchell <mark@codesourcery.com>
+
+ * MAINTAINERS (java): Remove Alexandre Petit-Bianco.
+
+2003-04-22 Kean Johnston <jkj@sco.com>
+
+ * MAINTAINERS (SCO ports): Added myself.
+
+2003-04-21 Nathan Sidwell <nathan@codesourcery.com>
+
+ * MAINTAINERS (gcov): Add myself and Jan Hubicka.
+
+2003-04-19 Kean Johnston <jkj@sco.com>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-04-18 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
+
+ * Makefile.tpl (MAKEINFOFLAGS): Default to --split-size=5000000.
+ * Makefile.in: Regenerate.
+
+2003-04-18 Jakub Jelinek <jakub@redhat.com>
+
+ * configure.in (powerpc64*-*-linux*): Remove.
+ * configure: Rebuilt.
+
+2003-04-17 Phil Edwards <pme@gcc.gnu.org>
+
+ * Makefile.tpl (GCC_STRAP_TARGETS): New variable containing all the
+ previous bootstrap targets, plus bubblestrap, quickstrap, cleanstrap,
+ and restrap.
+ * Makefile.in: Regenerate.
+
+2003-04-16 Richard Earnshaw <rearnsha@arm.com>
+
+ * configure.in (arm-*-netbsdelf*): Enable building java libraries.
+ * configure: Regenerated.
+
+2003-04-15 DJ Delorie <dj@redhat.com>
+
+ * MAINTAINERS: Remove myself as windows/cygwin/mingw maintainer.
+
+2003-04-13 Nick Clifton <nickc@redhat.com>
+
+ * config-ml.in: Remove support for --disable-aix removing
+ call-aix multilibs.
+
+2003-04-10 Alexandre Oliva <aoliva@redhat.com>
+
+ * libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on mips*.
+ * */configure: Rebuilt.
+
+2003-04-08 Joel Sherrill <joel@oarcorp.com>
+
+ * MAINTAINERS: Add my email address.
+
+2003-03-17 Olivier Hainque <hainque@act-europe.fr>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-03-14 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES back down.
+ * Makefile.in: Regenerate.
+
+2003-03-14 Michael Chastain <mec@shout.net>
+
+ * Makefile.in: Regenerate with correct Makefile.def.
+
+2003-03-12 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES up. Delete unused
+ Make macro.
+ * Makefile.in: Regenerate.
+ * configure.in: Clean up gxx_include_dir logic.
+ * configure: Regenerate.
+
+2003-03-12 Ansgar Esztermann <ansgar@thphy.uni-duesseldorf.de>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-03-10 Ben Elliston <bje@wasabisystems.com>
+
+ * MAINTAINERS: Update my mail address.
+
+2003-03-09 Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
+
+ * configure.in (gxx_include_dir): Fix typo.
+ * configure: Regenerated.
+
+2003-03-04 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Reindent.
+ * Makefile.in: Regenerate.
+ * configure.in: Reindent. Don't set unused variables.
+ * configure: Regenerate.
+
+2003-03-04 Daniel Jacobowitz <drow@mvista.com>
+
+ * configure.in: Include $(build_tooldir)/sys-include in
+ FLAGS_FOR_TARGET.
+ * configure: Regenerated.
+
+2003-03-04 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Always pass down RANLIB.
+ * Makefile.in: Regenerate.
+
+ * Makefile.tpl: Don't set unused enable_shared, enable_threads macros.
+ * Makefile.in: Regenerate.
+ * configure.in: Remove unused logic relating to --enable-shared
+ and --enable-threads. Remove bogus comments. Remove redundant
+ noconfigdirs.
+ * configure: Regenerate.
+
+ * configure.in: Replace ${libstdcxx_version} by its value.
+ Remove reference to mh-dgux.
+ * configure: Regenerate.
+
2003-03-03 Kevin Buettner <kevinb@redhat.com>
* MAINTAINERS (Write After Approval): Add myself.
--- /Users/regress/tbox/changelog_pass/gcc/gcc/ChangeLog Mon Mar 3 13:27:03 2003
+++ gcc/gcc/ChangeLog Thu Jun 26 07:37:26 2003
@@ -1,21217 +1,20580 @@
-Mon Mar 3 20:45:25 2003 J"orn Rennecke <joern.rennecke@superh.com>
+2003-06-26 Kazu Hirata <kazu@cs.umass.edu>
- * config/sh/sh.h (EXTRA_SPECS): Add subtarget_asm_relax_spec and
- subtarget_asm_isa_spec.
- (SUBTARGET_ASM_RELAX_SPEC, SUBTARGET_ASM_ISA_SPEC): Define.
- (ASM_SPEC): Define as SH_ASM_SPEC.
- (SH_ASM_SPEC): New; take the role of ASM_SPEC, but safe from svr4.h.
- Use subtarget_asm_relax_spec and subtarget_asm_isa_spec.
- * config/sh/elf.h (ASM_SPEC): Use SH_ASM_SPEC.
- (SUBTARGET_ASM_ISA_SPEC): Undef / define.
-
- * sh.h (OVERRIDE_OPTIONS): Set default values for align_loops
- and align_jumps if not set.
- Force align_jumps to be at least 2.
- When relaxing, force align_functions to be at least the maximum of
- align_loops, align_jumps and 4.
- * sh.c (find_barrier, barrier_align): Honour align_jumps_log.
- (sh_loop_align): Honour align_loops_log.
+ * postreload.c (reload_cse_simplify_set): Call cselib_lookup
+ earlier. Don't check if SRC is a constant.
- * sh.md (length attribute): Use prev_nonnote_insn instead of PREV_INSN
- to check for indirect_jump_scratch.
- (indirect_jump_scratch): Add second set.
- * sh.c (output_far_jump): Use prev_nonnote_insn instead of PREV_INSN
- when looking for indirect_jump_scratch.
- Extract scratch register taking new structure of indirect_jump_scratch
- into account.
- (gen_block_redirect): Set INSN_SCOPE for indirect_jump_scratch.
+2003-06-26 Kazu Hirata <kazu@cs.umass.edu>
-Mon Mar 3 19:07:21 CET 2003 Jan Hubicka <jh@suse.cz>
-
- * calls.c (rtx_for_function_call): Take the address as an argument
- (expand_call): Do not modify the expression.
+ * Makefile.in (OBJS): Add postreload.o.
+ Remove cselib.h from the dependency list for reload1.o.
+ Add a dependency list for postreload.o.
+ * reload.h: Change the comment for the prototype of
+ reload_cse_regs.
+ * reload1.c: Don't include cselib.h.
+ (reload_cse_regs): Move to postreload.c
+ (reload_cse_regs_1): Likewise.
+ (reload_cse_noop_set_p): Likewise.
+ (reload_cse_simplify_set): Likewise.
+ (reload_cse_simplify_operands): Likewise.
+ (RELOAD_COMBINE_MAX_USES): Likewise.
+ (reload_combine_ruid): Likewise.
+ (LABEL_LIVE): Likewise.
+ (reload_combine): Likewise.
+ (reload_combine_note_use): Likewise.
+ (reload_combine_note_store): Likewise.
+ (reg_set_luid): Likewise.
+ (reg_offset): Likewise.
+ (reg_base_reg): Likewise.
+ (reg_mode): Likewise.
+ (move2add_luid): Likewise.
+ (move2add_last_label_luid): Likewise.
+ (MODES_OK_FOR_MOVE2ADD): Likewise.
+ (reload_cse_move2add): Likewise.
+ (move2add_note_store): Likewise.
+ (reload_cse_simplify): Likewise.
+ * postreload.c: New.
- * toplev.c (rest_of_compilation): Avoid cfg_cleanup calls when not
- optimizing.
+2003-06-26 Kazu Hirata <kazu@cs.umass.edu>
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+ * config/avr/avr.c (final_prescan_insn): Remove support for
+ -mrtl.
+ * config/avr/avr.h (MASK_RTL_DUMP): Remove.
+ (TARGET_RTL_DUMP): Likewise.
+ (TARGET_SWITCHES): Remove -mrtl.
+
+2003-06-26 Kazu Hirata <kazu@cs.umass.edu>
+
+ * config/h8300/h8300-protos.h: Change emit_a_rotate to
+ output_a_rotate. Add a prototype for compute_a_rotate_length.
+ * config/h8300/h8300.c (emit_a_rotate): Change to
+ output_a_rotate.
+ (compute_a_rotate_length): New.
+ (h8300_adjust_insn_length): Remove.
+ * config/h8300/h8300.h (ADJUST_INSN_LENGTH): Remove.
+ * config/h8300/h8300.md (adjust_length): Remove.
+ (*rotlqi3_1): Use output_a_rotate and compute_a_rotate_length.
+ (*rotlhi3_1): Likewise.
+ (*rotlsi3_1): Likewise.
- * config/h8300/h8300.md (*ixorsi3_zext_hi): Restrict to
- TARGET_H8300H and TARGET_H8300S.
+2003-06-26 Roger Sayle <roger@eyesopen.com>
+ Richard Henderson <rth@redhat.com>
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+ * builtins.c (expand_builtin_mathfn): Always stabilize the argument
+ list against re-evaluation. If expand_unop fails, call expand_call
+ with the stabilized argument list rather than return NULL_RTX.
+ (expand_builtin_mathfn2): Likewise, always stabilize the argument
+ list, and call expand_call ourselves if expand_binop fails.
+
+2003-06-26 Eric Botcazou <ebotcazou@libertysurf.fr>
+
+ PR optimization/11210
+ * fold-const (decode_field_reference): Strip only NOPs that
+ don't affect the sign.
+
+2003-06-26 Dhananjay Deshpande <dhananjayd@kpitcummins.com>
+
+ * gcc/config/sh/sh.md (push_fpscr): Enable for TARGET_SH2E.
+ (pop_fpscr, fpu_switch): Likewise.
+
+2003-06-26 Zdenek Dvorak <rakdver@atrey.karlin.mff.cuni.cz>
+
+ * value-prof.c: New.
+ * value-prof.h: New.
+ * Makefile.in (value-prof.o): New.
+ (LIBGCOV): Add _gcov_merge_single and _gcov_merge_delta
+ (profile.o): Add value-prof.h and tree.h dependency.
+ * flags.h (flag_profile_values): Declare.
+ * gcov-io.h (GCOV_COUNTERS, GCOV_COUNTER_NAMES, GCOV_MERGE_FUNCTIONS):
+ Add new counters.
+ (GCOV_COUNTER_V_INTERVAL, GCOV_COUNTER_V_POW2, GCOV_COUNTER_V_SINGLE,
+ GCOV_COUNTER_V_DELTA): New counter sections.
+ (__gcov_merge_single, __gcov_merge_delta): Declare.
+ * flow.c (mark_used_regs): Set subregs_of_mode only when the
+ structure is initialized.
+ * libgcov.c (__gcov_merge_single, __gcov_merge_delta): New functions.
+ * profile.c: Include value-prof.h and tree.h.
+ (gen_interval_profiler, gen_pow2_profiler, gen_one_value_profiler,
+ gen_const_delta_profiler, instrument_values): New static functions.
+ (get_exec_counts): Fix comment.
+ (branch_prob): Invoke instrument_values.
+ * toplev.c (flag_profile_values): New flag.
+ * doc/invoke.texi (-fprofile-values): Document.
+
+2003-06-26 Zdenek Dvorak <rakdver@atrey.karlin.mff.cuni.cz>
+
+ * Makefile.in (cfgrtl.o): Add expr.h dependency.
+ * cfgrtl.c: Include expr.h.
+ (mark_killed_regs, safe_insert_insn_on_edge): New
+ functions.
+ * config/i386/i386.h (AVOID_CCMODE_COPIES): Define.
+ * basic-block.h (safe_insert_insn_on_edge): Declare.
- * config/h8300/h8300.md (a peephole2): New.
+2003-06-26 Neil Booth <neil@daikokuya.co.uk>
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+ * c-opts.c (missing_arg): Make non-static.
+ (c_common_handle_option): Don't check for missing arguments.
+ * opts.c (handle_option): Check for missing arguments.
- * config/h8300/h8300.md (*extzv_8_8): Use shorter code when
- operands[0] and operands[1] are different.
+2003-06-26 David Edelsohn <edelsohn@gnu.org>
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+ * config/rs6000/power4.md (power4-veccomplex): Correct latency.
- * reload1.c (reload_cse_move2add): Remove variable success.
+2003-06-25 Loren James Rittle <ljrittle@acm.org>
-2003-03-02 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+ * configure.in (ld_vers): Portability [sed].
+ * configure: Regenerate with autoconf213.
- * ggc-common.c (ggc_rlimit_bound): Cast RLIM_INFINITY to avoid
- warnings.
+2003-06-25 H.J. Lu <hongjiu.lu@intel.com>
-2003-03-02 Richard Henderson <rth@redhat.com>
+ * doc/extend.texi: Document new builtin functions for Intel
+ Prescott New Intrunctions.
- * configure.in (HAVE_AS_LTOFFX_LDXMOV_RELOCS): New ia64 test.
- * config.in, configure: Rebuild.
- * config/ia64/ia64.c (ia64_ld_address_bypass_p): Accept lo_sum.
- * config/ia64/ia64.md (load_symptr): Use high/lo_sum for the
- paired ldtoffx and ldxmov annotations.
- (load_symptr_internal1): Remove.
- (load_symptr_high, load_symptr_low): New.
+ * doc/invoke.texi: Document new command-line options, -mpni and
+ -mno-pni, for Intel Prescott New Intrunctions.
-2003-03-02 Neil Booth <neil@daikokuya.co.uk>
+ * config.gcc (extra_headers): Add pmmintrin.h for i[34567]86-*-*.
- * c-incpath.c (add_path): Fix sysp assignment.
+ * config/i386/i386.c (override_options): Turn on MASK_SSE2
+ for -mpni. Turn on MASK_SSE for -msse2.
+ (bdesc_2arg): Add PNI builtins with 2 args.
+ (bdesc_1arg): Add PNI builtins with 1 arg.
+ (ix86_init_mmx_sse_builtins): Handle PNI builtins.
+ (ix86_expand_builtin): Likewise.
-2003-03-02 Kurt Garloff <garloff@suse.de>
+ * config/i386/i386.h (MASK_3DNOW, MASK_3DNOW_A,
+ MASK_128BIT_LONG_DOUBLE, MASK_64BIT, MASK_MS_BITFIELD_LAYOUT,
+ MASK_TLS_DIRECT_SEG_REFS): Renumbered.
+ (TARGET_PNI): New.
+ (TARGET_SWITCHES): Don't enable MASK_SSE for -msse2 here. Add
+ -mpni and -mno-pni.
+ (TARGET_CPU_CPP_BUILTINS): Defined __PNI__ for PNI.
+ (ix86_builtins): Add PNI builtins.
+ (config/i386/i386.md): Add PNI patterns.
- * params.def: Introduce parameter max-inline-insns-rtl for
- a separate limit for the RTL inliner.
- * params.h: Likewise.
- * integrate.c (function_cannot_inline_p): Use it.
- * toplev.c (decode_f_option): Set multiple parameters
- controlling inlining with -finline-limit.
- * params.def: Fix orthographic and typographic errors.
- * doc/invoke.texi: Document parameters controlling inlining
- and the way -finline-limit sets multiple of them.
+ * config/i386/pmmintrin.h: New file.
- * tree.h (struct tree_decl): Introduce inlined_function_flag,
- recording whether the function became eligible for inlining
- by a compiler flag rather than the declaration.
- Provide DID_INLINE_FUNC macro to access it.
- * c-decl.c (grokdeclarator): Set DID_INLINE_FUNC.
- * cp/decl.c (grokfndecl): Likewise.
- * toplev.c (rest_of_compilation): Likewise.
- * cp/optimize (maybe_clone_body): Copy DID_INLINE_FUNC.
- * print-tree.c (print_node): Report it.
- * params.def: Introduce new max-inline-insns-auto limit.
- * params.h: Likewise.
- * tree-inline.c (inlinable_function_p): Apply it to functions
- with DID_INLINE_FUNC set.
- * toplev.c (decode_f_option): Initialize it from -finline-limit
- value.
- * doc/invoke.texi: Document new parameter.
+2003-06-25 Kazu Hirata <kazu@cs.umass.edu>
-2003-03-02 Geoffrey Keating <geoffk@apple.com>
+ * config/h8300/h8300.md (call): Fix the insn lengths.
+ (call_value): Likewise.
- * fix-header.c (read_scan_file): Don't reference simplify_path.
+Thu Jun 26 00:13:35 CEST 2003 Jan Hubicka <jh@suse.cz>
-2003-03-02 Stephane Carrez <stcarrez@nerim.fr>
+ * c-common.c (handle_used_attribute): Use mark_referenced.
+ * varasm.c (mark_referenced): Break out from ...
+ (assemble_name): ... here.
+ * tree.h (mark_referenced): Declare.
- * config/m68hc11/m68hc11.c (m68hc11_override_options): Don't enable
- min/max instructions by default as may result in reload errors.
+2003-06-25 Wolfgang Bangerth <bangerth@dealii.org>
-2003-03-02 Stephane Carrez <stcarrez@nerim.fr>
+ * gccbug.in: Add PCH to list of categories.
- * config/m68hc11/m68hc11.md ("mulqi3"): Allow address register to
- avoid reload problems; define split for it.
+2003-06-25 Martin Schaffner <schaffner@gmx.li>
-2003-03-02 Stephane Carrez <stcarrez@nerim.fr>
+ * cppfiles.c: Clarify comments.
+ * cpphash.h: Likewise.
+ * cpplib.h: Likewise.
+ * cppmacro.c: Likewise.
+ * mkdeps.h: Likewise.
- * config/m68hc11/m68hc11.c (m68hc11_shift_operator): New function.
- * config/m68hc11/m68hc11-protos.h (m68hc11_shift_operator): Declare.
- * config/m68hc11/m68hc11.h (PREDICATE_CODES): Register.
- * config/m68hc11/m68hc11.md ("rotrhi3", "rotlhi3"): New patterns for
- rotatert and rotate.
- ("rotrhi3_const", "rotlhi3_const"): Rename of old 'rotrhi3' insns.
- ("*rotrhi3", "*rotlhi3"): New insn pattern for non-const rotatert.
- ("*rotrhi3_addr"): New split for shift insns on address register.
- ("*lshrhi3", "*ashrhi3", "*ashlhi3_2"): Use new split.
- * config/m68hc11/larith.asm (___rotlhi3): New asm function.
- (___rotrhi3): Likewise.
- * config/m68hc11/t-m68hc11-gas (LIB1ASMFUNCS): Build them.
+2003-06-25 Neil Booth <neil@daikokuya.co.uk>
-2003-03-02 Neil Booth <neil@daikokuya.co.uk>
+ * c-opts.c (complain_wrong_lang, write_langs): Remove.
+ (c_common_handle_option): Complaints about wrong language are
+ handled in opts.c now.
+ * opts.c (complain_wrong_lang, write_langs, handle_options): New.
+ (find_opt): Fix thinko.
+ (handle_option): Update prototype. Complain about switches for
+ a different front end.
+ * opts.h (lang_names, handle_options): New.
+ (handle_option): Remove.
+ * opts.sh: Write out language names array.
+ * toplev.c (parse_options_and_default_flags): Use handle_options.
+
+2003-06-25 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/i386/i386.c (MASK_SSE1): Removed.
+ (MASK_SSE164): Removed.
+ (MASK_SSE264): Removed.
+ (bdesc_2arg): Replace MASK_SSE1 with MASK_SSE. Replace
+ MASK_SSE164 with MASK_SSE | MASK_64BIT. Replace MASK_SSE264
+ with MASK_SSE2 | MASK_64BIT.
+ (bdesc_1arg): Likewise.
+ (ix86_init_mmx_sse_builtins): Likewise.
- * toplev.c (aux_base_name): Moved from toplev.h.
- (filename): Constify.
- (lang_dependent_init): Don't duplicate name.
- (process_options): Set aux_base_name here, not...
- (do_compile): ...here. Change protoype.
- (toplev_main): Move some code from do_compile.
- * toplev.h: Remove aux_base_name.
+ * config/i386/i386.h (TARGET_SSE): Remove MASK_SSE2.
+ (TARGET_SWITCHES): Enable both MASK_SSE and MASK_SSE2 for
+ -msse2.
-2003-03-02 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-25 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
- * config/h8300/h8300-protos.h: Add a prototype for
- iorxor_operator.
- * config/h8300/h8300.c (print_operand): Handle 'c'.
- (iorxor_operator): New.
- * config/h8300/h8300.h (PREDICATE_CODES): Add iorxor_operator.
- * config/h8300/h8300.md (*iorhi3_zext): Remove.
- (*iorsi3_zexthi): Likewise.
- (*iorsi3_zextsi): Likewise.
- (*xorhi3_zextqi): Likewise.
- (*xorsi3_zexthi): Likewise.
- (*xorsi3_zextsi): Likewise.
- (*ixorhi3_zext): New.
- (*ixorsi3_zext_qi): Likewise.
- (*ixorsi3_zext_hi): Likewise.
+ * hwint.h (HOST_WIDE_INT_PRINT, HOST_WIDE_INT_PRINT_C): New macros.
+ (HOST_WIDE_INT_PRINT_DEC_SPACE,
+ HOST_WIDE_INT_PRINT_UNSIGNED_SPACE,
+ HOST_WIDEST_INT_PRINT_DEC_SPACE,
+ HOST_WIDEST_INT_PRINT_UNSIGNED_SPACE): Delete.
+ (HOST_WIDE_INT_PRINT_DEC, HOST_WIDE_INT_PRINT_DEC_C,
+ HOST_WIDE_INT_PRINT_UNSIGNED, HOST_WIDE_INT_PRINT_HEX): Define in
+ terms of HOST_WIDE_INT_PRINT and possibly HOST_WIDE_INT_PRINT_C.
-2003-03-02 Neil Booth <neil@daikokuya.co.uk>
+ * final.c (asm_fprintf): Use HOST_WIDE_INT_PRINT.
+ * ra-debug.c (dump_static_insn_cost): Likewise.
- * c-incpath.c (remove_component_p, simplify_path): Move back to
- cppfiles.c.
- (remove_duplicates): Use cpp_simplify_path.
- * c-incpath.h (simplify_path): Remove.
- * c-lex.c: Don't include c-incpath.h.
- (init_c_lex): Remove simplify_path.
- * cppfiles.c (remove_component_p, cpp_simplify_path): Restore.
- (find_or_create_entry, validate_pch): Revert.
+2003-06-26 Nick Clifton <nickc@redhat.com>
-2003-03-02 Ashif Harji <asharji@uwaterloo.ca>
+ * config/arm/arm.h (BIGGEST_FIELD_ALIGNMENT): Define instead
+ of ADJUST_FIELD_ALIGN if IN_TARGET_LIBS.
+ Replace occurances of '???' with 'XXX' incase they are
+ mistaken for trigraphs.
+ (THUMB_PRINT_OPERAND_ADDRESS): abort if a compound address
+ does not have a register for the first operand.
- * gcc.c (default_compilers): Add -no-integrated-cpp flag to invoke
- an external cpp during compilation.
- (option_map): Likewise.
- * objc/lang-specs.h (default_compilers): Similarly.
- * doc/invoke.texi: Document -no-integrated-cpp flag.
+2003-06-25 Dhananjay Deshpande <dhananjayd@kpitcummins.com>
-2003-03-02 Kazu Hirata <kazu@cs.umass.edu>
+ * config/sh/sh.c (sh_register_move_cost):
+ Add case for moving between MAC_REGS.
- * config/h8300/h8300.md (zero_extendqisi2): Change to an
- expander.
- (*zero_extendqisi2_h8300): New.
- (*zero_extendqisi2_h8300hs): New.
- (two splitters): New.
+2003-06-25 Zack Weinberg <zack@codesourcery.com>
-2003-03-02 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+ PR 10178
+ * langhooks.h (struct lang_hooks): Add no_body_blocks bool.
+ * langhooks-def.h (LANG_HOOKS_NO_BODY_BLOCKS): New; default false.
+ * c-lang.c, objc/objc-lang.c: Override LANG_HOOKS_NO_BODY_BLOCKS
+ to true.
+ * stmt.c (is_body_block): If lang_hooks.no_body_blocks, always
+ return 0.
- * fp-bit.h (float_to_usi): Fix condition wrapping prototype.
+2003-06-25 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
-2003-03-01 Kazu Hirata <kazu@cs.umass.edu>
+ * Makefile.in (bt-load.o): Depend on $(TM_P_H).
+ * bt-load.c: Include "tm_p.h".
- * config/h8300/h8300.md (a peephole2): Remove dead code.
+2003-06-25 Kazu Hirata <kazu@cs.umass.edu>
-2003-03-01 Roger Sayle <roger@eyesopen.com>
+ * config/h8300/h8300.c (compute_mov_length): Adjust for the
+ new optimization.
+ * config/h8300/h8300.md (*movsi_h8300): Optimize the load of
+ an SImode constant whose upper and lower are the same.
- PR c++/9367
- * builtin-types.def (DEF_FUNCTION_TYPE_VAR_3): New macro.
- (BT_FN_INT_CONST_STRING_VALIST_ARG,
- BT_FN_INT_STRING_CONST_STRING_VALIST_ARG,
- BT_FN_INT_CONST_STRING_CONST_STRING_VALIST_ARG,
- BT_FN_INT_STRING_SIZE_CONST_STRING_VALIST_ARG,
- BT_FN_INT_STRING_CONST_STRING_VAR,
- BT_FN_INT_CONST_STRING_CONST_STRING_VAR,
- BT_FN_INT_STRING_SIZE_CONST_STRING_VAR): New built-in types.
- * builtin-attrs.def (ATTR_NONNULL_1, ATTR_NONNULL_2,
- ATTR_NONNULL_3): Also include the nothrow attribute.
- (sprintf, scanf, sscanf, vprintf, vsprintf, snprintf,
- vsnprintf, vscanf, vsscanf): Don't define attributes here.
- * builtins.def (putchar, puts): Make full C89 built-ins.
- (snprintf, sprintf, scanf, sscanf, vprintf, vscanf,
- vsscanf, vsnprintf, vsprintf): New built-ins.
- * c-common.c (c_common_nodes_and_builtins): Handle new macro
- DEF_FUNCTION_TYPE_VAR_3.
+Wed Jun 25 11:31:59 CEST 2003 Jan Hubicka <jh@suse.cz>
- * doc/extend.texi: Document these new built-in functions.
+ * varasm.c (assemble_name): Mark needed variables even when
+ global info is ready.
-2003-03-01 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-24 Jerry Quinn <jlquinn@optonline.net>
- * config/h8300/h8300.md (a peephole2): New.
+ PR other/11280
+ * gcc/doc/invoke.texi (Optimization Options): Remove -Os from
+ -freorder-functions description.
-2003-03-01 Richard Earnshaw <rearnsha@arm.com>
+2003-06-25 Josef Zlomek <zlomekj@suse.cz>
- * predict.c (estimate_bb_frequencies): Correctly set
- real_values_initialized after initialization.
+ * dwarf2out.c (gen_field_die): Return if type of decl is error mark.
-2003-03-01 Neil Booth <neil@daikokuya.co.uk>
+2003-06-25 Neil Booth <neil@daikokuya.co.uk>
- * Makefile.in (C_AND_OBJC_OBJS, c-incpath.o, c-lex.o, LIBCPP_OBJS,
- cppinit.o, cppdefault.o, fix-header): Update.
- * c-incpath.c: New file.
- * c-incpath.h: New file.
- * c-lex.c: Include c-incpath.h.
- (init_c_lex): Register path simplifier.
- * c-opts.c: Include cppdefault.h and c-incpath.h.
- (TARGET_SYSTEM_ROOT, verbose, iprefix, sysroot, std_inc,
- std_cxx_inc, quote_chain_split, add_prefixed_path): New.
- (COMMAND_LINE_OPTIONS): Add more options from cpplib.
- (missing_arg, c_common_decode_option): Handle them.
- (c_common_post_options): Register include chains.
- (print_help): Update.
- * cppdefault.h (struct default include): Update.
- Move some macros to ...
- * cppdefault.c: ... here.
- (cpp_include_defaults): Add extra field add_sysroot.
- * cppfiles.c (include_file, search_from, find_or_create_entry,
- cpp_included, find_include_file, remap_filename): Update for
- renaming of search_path to cpp_path, and of the chain headers.
- (remove_component_p, _cpp_simplify_pathname): Move to c-incpath.c.
- * cpphash.h (struct search_path): Move to cpplib.h.
- (struct cpp_buffer, struct cpp_reader): Update.
- (_cpp_simplify_pathname): Remove.
- * cppinit.c: Don't include prefix.h and cppdefault.h.
- (INO_T_EQ, INO_T_COPY, path_include, append_include_chain,
- remove_dup_dir, remove_dup_nonsys_dirs, remove_dup_dirs,
- init_standard_includes, BRACKET, SYSTEM, AFTER, no_dir,
- no_pth, cpp_handle_options): Remove.
- (struct pending_option): Remove chain members.
- (cpp_destroy, cpp_read_main_file, COMMAND_LINE_OPTIONS,
- cpp_handle_option): Update.
- * cpplib.h (struct cpp_path, cpp_set_include_chains): New.
- (struct cpp_options): Remove quote_include, bracket_include,
- include_prefix, include_prefix_len, verbose, ignore_srcdir,
- no_standard_includes, no_standard_cplusplus_includes.
- (struct cpp_callbacks): Add simplify_path.
- (cpp_handle_options): Remove.
- * fix-header.c: Include c-incpath.h.
- (read_scan_file): Update to use c-incpath functionality.
- * doc/passes.texi: Update.
+ * opts.c (common_handle_option): Add missing break;s.
-2003-03-01 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-24 Kazu Hirata <kazu@cs.umass.edu>
- * config/h8300/h8300.c (bit_operand): Accept MEM only if it
- satisfies EXTRA_CONSTRAINT 'U'.
+ * config/h8300/h8300-protos.h: Add a prototype for
+ compute_mov_length.
+ * config/h8300/h8300.c (compute_mov_length): New.
+ * config/h8300/h8300.md (*movqi_h8300): Use it.
+ (*movqi_h8300hs): Likewise.
+ (movstrictqi): Likewise.
+ (*movhi_h8300): Likewise.
+ (*movhi_h8300hs): Likewise.
+ (movstricthi): Likewise.
+ (*movsi_h8300): Likewise.
+ (*movsf_h8300): Likewise.
+ (*movsi_h8300hs): Likewise.
+ (*movsf_h8300hs): Likewise.
+
+2003-06-24 Kazu Hirata <kazu@cs.umass.edu>
+
+ * jump.c (next_nondeleted_insn): Remove.
+ * rtl.h: Remove the prototype for next_nondeleted_insn.
+
+2003-06-24 Roger Sayle <roger@eyesopen.com>
+
+ PR optimization/11311
+ * builtins.c (powi_cost): Fix typo. The number of multiplications
+ required is the number to reduce the argument, result, plus the
+ cost of calculating the residual, val [not n, the original value].
+
+2003-06-24 Roger Sayle <roger@eyesopen.com>
+
+ * config/alpha/osf5.h (TARGET_C99_FUNCTIONS): Define.
+
+2003-06-24 Richard Henderson <rth@redhat.com>
+ (blame to: Loren James Rittle <ljrittle@acm.org>)
+
+ * real.h (ieee_extended_intel_96_round_53_format): New.
+ * real.c (ieee_extended_intel_96_round_53_format): New.
+ * config/i386/freebsd.h (SUBTARGET_OVERRIDE_OPTIONS): Use it
+ for XFmode and TFmode.
-2003-03-01 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-24 Kazu Hirata <kazu@cs.umass.edu>
- * config/h8300/h8300.md (*tst_extzv_bitqi_1_n): Take a scratch
- register.
- (*tst_extzv_memqi_1_n): Change to a splitter.
- (a peephole2): Update.
+ * config/h8300/h8300.md (4 anonymous patterns): Give internal
+ names.
+ (movsi_h8300): Change the name to *movsi_h8300.
+ (movsi_h8300hs): Change the name to *movsi_h8300hs.
+ (movsf_h8300): Change the name to *movsf_h8300.
+ (movsf_h8300hs): Change the name to *movsf_h8300hs.
+
+2003-06-24 Jakub Jelinek <jakub@redhat.com>
+
+ * builtins.c (expand_builtin_strcpy): Don't evaluate side-effects in
+ src twice.
+
+2003-06-24 J"orn Rennecke <joern.rennecke@superh.com>
+
+ Back out these patches:
+ 2003-06-02 J"orn Rennecke <joern.rennecke@superh.com>
+ * sh.h (OLD_ARG_MODE): New macro.
+ (FUNCTION_ARG_ADVANCE, FUNCTION_ARG_PASS_BY_REFERENCE): Use it.
+ (FUNCTION_ARG_1): Break out of:
+ (FUNCTION_ARG). Use OLD_ARG_MODE.
+ 2003-06-06 J"orn Rennecke <joern.rennecke@superh.com>
+ * sh.h (FUNCTION_ARG_1): Consistently use NEW_MODE for the mode
+ of the generated register.
+
+ * sh.h (FUNCTION_ARG_SCmode_WART): Define.
+ (FUNCTION_ARG): Unless FUNCTION_ARG_SCmode_WART is defined and
+ an even number of floating point regs are in use, use the same
+ sequence of argument passing registers for SCmode as would be
+ used for two SFmode values.
+ * sh.c (sh_va_arg): If FUNCTION_ARG_SCmode_WART is defined,
+ swap real / imaginary parts in incoming SCmode values passed
+ in registers.
+
+2003-06-24 Falk Hueffner <falk.hueffner@student.uni-tuebingen.de>
+
+ PR target/11260
+ * config/alpha/alpha.md (sqrtdf2): Fix operand substitution.
+
+Tue Jun 24 18:49:33 CEST 2003 Jan Hubicka <jh@suse.cz>
+
+ * Makefile.in (cgraph.o): Depend on output.h, not depend on
+ tree-inline.h
+ * cgraph.c: Do not include tree-inline.h; include output.h
+ (known_fns): Rename to ...
+ (known_decls): ... this one; update all uses.
+ (cgraph_varpool_hash): New static variable.
+ (cgraph_varpool_n_nodes, cgraph_varpool_nodes_queue): New global
+ variables.
+ (cgraph_varpool_hash_node, eq_cgraph_varpool_node, cgraph_varpool_node,
+ cgraph_varpool_node_for_identifier, cgraph_varpool_mark_needed_node,
+ cgraph_varpool_finalize_decl, cgraph_varpool_assemble_pending_decls):
+ New functions.
+ * cgraph.h (cgraph_varpool_node): New structure.
+ (cgraph_varpool_n_nodes, cgraph_varpool_nodes_queue): Declare.
+ (cgraph_varpool_node, cgraph_varpool_node_for_identifier,
+ cgraph_varpool_finalize_decl, cgraph_varpool_mark_needed_node,
+ cgraph_varpool_asemble_pending_decls): Declare.
+ * cgraphunit.c (record_call_1): Notice variable references.
+ (cgraph_finalize_compilation_unit): Assemble pending variables.
+ * toplev.c (wrapup_global_declarations): Use varpool.
**** TRUNCATED ****
-------------- next part --------------
--
Geoffrey Keating <geoffk@apple.com>
(via an automated GCC regression-testing script.)
More information about the Gcc-regression
mailing list