4 GCC regressions, 0 new, with your patch on 2003-06-17T16:07:51Z.
GCC regression checker
geoffk@apple.com
Tue Jun 17 21:17:00 GMT 2003
With your recent patch, GCC has some regression test failures, which
used to pass. There are 0 new failures, and 4
failures that existed before and after that patch; 0 failures
have been fixed.
The old failures, which were not fixed or introduced by your patch, are:
native g77.sum g77.f-torture/compile/20010321-1.f,
native g77.sum g77.f-torture/execute/980520-1.f
native gcc.sum gcc.c-torture/execute/20000412-3.c
native gcc.sum gcc.dg/warn-1.c
For more information, see http://gcc.gnu.org/regtest/.
-------------- next part --------------
ChangeLog entries since last run on 2003-06-17T11:14:50Z:
--- /Users/regress/tbox/changelog_mail/gcc/gcc/ChangeLog Tue Jun 17 04:15:30 2003
+++ gcc/gcc/ChangeLog Tue Jun 17 09:08:30 2003
@@ -1,3 +1,36 @@
+2003-06-17 Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
+
+ * config/rs6000/linux.h (MD_FALLBACK_FRAME_STATE_FOR): Partly revert
+ 2003-01-23 patch. Corrected to handle kernels with changed ucontext.
+
+ * config/rs6000/sysv4.h (SUBTARGET_OVERRIDE_OPTIONS): Error on invalid
+ -msdata=eabi usages.
+
+ * gcc/config/rs6000/sysv4.h (USE_LIBC_1): Delete all uses.
+
+2003-06-17 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+
+ * alloc-pool.c: Don't check HAVE_LONG_DOUBLE.
+ * fixinc/gnu-regex.c: Don't define `volatile'.
+ * ggc-page.c: Don't check HAVE_LONG_DOUBLE.
+ * ggc-simple.c: Likewise.
+ * system.h: Don't define `volatile'.
+
+ * aclocal.m4 (gcc_AC_C_VOLATILE, gcc_AC_C_LONG_DOUBLE): Delete.
+ * configure.in (gcc_AC_C_VOLATILE, gcc_AC_C_LONG_DOUBLE): Don't
+ call these macros.
+ * config.in, configure: Regenerated.
+
+2003-06-17 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
+
+ * config/ia64/ia64.c (ia64_expand_builtin, case IA64_BUILTIN_BSP):
+ Handle POINTERS_EXTEND_UNSIGNED.
+
+2003-06-17 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
+
+ * config/mips/mips.c (TARGET_ASM_UNALIGNED_DI_OP) [TARGET_IRIX5 &&
+ !TARGET_IRIX6]: Define as NULL.
+
2003-06-17 Eric Botcazou <ebotcazou@libertysurf.fr>
* config/sparc/sparc.c (sparc_va_arg): Don't align 16-byte+ structures.
--- /Users/regress/tbox/changelog_mail/gcc/include/ChangeLog Thu May 15 14:56:31 2003
+++ gcc/include/ChangeLog Tue Jun 17 09:08:40 2003
@@ -1,3 +1,7 @@
+2003-06-17 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+
+ * ansidecl.h: Delete HAVE_LONG_DOUBLE GCC bootstrap support.
+
2003-05-15 Jim Blandy <jimb@redhat.com>
* libiberty.h (hex_value): Make the value an unsigned int, to
--- /Users/regress/tbox/changelog_mail/gcc/libjava/ChangeLog Sat Jun 14 04:58:19 2003
+++ gcc/libjava/ChangeLog Tue Jun 17 09:08:41 2003
@@ -1,3 +1,51 @@
+2003-06-17 Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
+
+ * include/powerpc-signal.h: New File.
+ * configure.in: Use it.
+ * configure: Regenerated.
+
+2003-06-17 Michael Koch <konqueror@gmx.de>
+
+ * java/util/Locale.java
+ (getDisplayLanguage): Made it final.
+ (getDisplayCountry): Likewise.
+ (getDisplayVariant): Likewise.
+ (getDisplayName): Likewise.
+
+2003-06-17 Michael Koch <konqueror@gmx.de>
+
+ * java/util/PropertyResourceBundle.java:
+ Removed unneeded import.
+
+2003-06-17 Michael Koch <konqueror@gmx.de>
+
+ * java/util/prefs/AbstractPreferences.java,
+ java/util/prefs/PreferencesFactory.java:
+ Reworked imports, removed unused imports.
+ * java/util/prefs/Preferences.java
+ (systemNodeForPackage): Method takes a Class not an Object.
+ (userNodeForPackage): Likewise.
+ (nodeForPackage): Likewise.
+
+2003-06-17 Michael Koch <konqueror@gmx.de>
+
+ * gnu/java/security/x509/X509Certificate.java:
+ Explicitely import used classes.
+
+2003-06-17 Michael Koch <konqueror@gmx.de>
+
+ * java/util/zip/ZipEntry.java,
+ java/util/zip/ZipFile.java,
+ java/util/zip/ZipInputStream.java,
+ java/util/zip/ZipOutputStream.java:
+ Reworked imports, only import used classes.
+
+2003-06-17 Michael Koch <konqueror@gmx.de>
+
+ * gnu/java/lang/ArrayHelper.java,
+ gnu/java/lang/ClassHelper.java:
+ Reformatted to match classpath's versions.
+
2003-06-14 Michael Koch <konqueror@gmx.de>
* gnu/java/nio/FileChannelImpl.java
ChangeLog entries between 2003-06-17T11:14:50Z and the last time everything
passed, on 2003-03-03T21:26:39Z:
--- /Users/regress/tbox/changelog_pass/gcc/ChangeLog Mon Mar 3 13:26:59 2003
+++ gcc/ChangeLog Tue Jun 17 04:15:28 2003
@@ -1,3 +1,307 @@
+2003-06-17 Kazu Hirata <kazu@cs.umass.edu>
+
+ * MAINTAINERS (Write After Approval): Remove Andrew Haley.
+
+2003-06-16 Graeme Peterson <gp@qnx.com>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-06-14 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config.guess: Update to 2003-06-12 version.
+ * config.sub: Update to 2003-06-13 version.
+
+2003-06-12 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config.guess: Update to 2003-06-06 version.
+ * config.sub: Update to 2003-06-06 version.
+
+2003-06-11 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
+
+ * configure.in: Don't pass --with-stabs for mips*-sgi-irix6*o32.
+ * configure. Regenerate.
+
+2003-06-10 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure.in: Disable serial configure by default.
+ * configure: Regenerate.
+ * Makefile.tpl: Abolish .NOTPARALLEL.
+ * Makefile.in: Regenerate.
+
+ * Makefile.tpl: Replace {build,host,target}_canonical by
+ {build,host,target}.
+ * Makefile.in: Regenerate.
+
+ * Makefile.tpl: Fix stupid pasto.
+ * Makefile.in: Regenerate.
+
+2003-06-09 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Remove bogus conditional.
+ * Makefile.in: Regenerate.
+
+2003-06-05 Jan Hubicka <jh@suse.cz>
+
+ * Makefile.tpl (profiledbootstrap): New target.
+ * Makefile.in (profiledbootstrap): New target.
+
+2003-06-05 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (Bugzilla only): Add Dara Hazeghi and Andrew
+ Pinski. Remove user names from other bugzilla-only maintainers.
+
+2003-06-03 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Make 'recursive targets' using autogen rather
+ than shell loop. Remove duplicate 'clean' targets and false
+ comments.
+ * Makefile.def: Add systematic dependencies to 'recursive' targets.
+ Add systematic method of specifying missing targets in subdirs.
+ Add copyright boilerplate.
+ * Makefile.in: Regenerate.
+ * configure.in: Add 'recursive targets' to maybe list.
+ * configure: Regenerate.
+
+ * MAINTAINERS: "GNATS only" -> "Bug database only".
+
+ * Makefile.tpl: Rename [+target+] to [+make_target+].
+ * Makefile.def: Rename 'target' to 'make_target'.
+
+2003-05-31 Neil Booth <neil@daikokuya.co.uk>
+
+ * MAINTAINERS: Add self as options handling maintainer.
+
+2003-05-28 Michael Meissner <gnu@the-meissners.org>
+
+ * MAINTAINERS: Remove myself as m32r/v850 maintainer, since it has
+ been too long since I touched those ports.
+
+2003-05-28 DJ Delorie <dj@redhat.com>
+
+ * Makefile.tpl: Make maybe-check-gcc .PHONY.
+ * Makefile.in: Regenerate.
+
+2003-05-21 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
+
+ * configure.in: Use curly braces in the definition of tooldir.
+ * configure: Regenerate.
+
+2003-05-21 DJ Delorie <dj@redhat.com>
+
+ * Makefile.tpl (configure-target-libiberty): Depend only on gcc, not
+ newlib or libgloss.
+ * Makefile.in: Regenerate.
+
+2003-05-21 DJ Delorie <dj@redhat.com>
+
+ * Makefile.tpl: Add missing empty maybe-check-gcc target.
+ * Makefile.in: Regenerate.
+
+2003-05-20 Ian Lance Taylor <ian@airs.com>
+
+ * MAINTAINERS: Update my e-mail address.
+
+2003-05-19 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure.in: Switch more things to use maybe dependencies.
+ * Makefile.tpl: Switch more things to use maybe dependencies.
+ Factor out common code from autogen IF statements.
+ * configure: Regenerate.
+ * Makefile.in: Regenerate.
+
+2003-05-14 Kelley Cook <kelleycook@wideopenwest.com>
+
+ * configure.in: Accept i[3456789]86 for machine type.
+ * configure: Regenerate.
+
+2003-05-18 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure.in: Switch more things to use maybe dependencies.
+ Rearrange a little. Use GCC_TOPLEV_SUBDIRS.
+ * configure: Regenerate.
+ * Makefile.tpl: Switch more things to use maybe dependencies.
+ * Makefile.in: Regenerate.
+
+2003-05-16 Andreas Schwab <schwab@suse.de>
+
+ * Makefile.tpl (install-opcodes): Define.
+ * Makefile.in: Rebuild.
+
+2003-05-13 Andreas Jaeger <aj@suse.de>
+
+ * config.guess: Update to 2003-05-09 version.
+ * config.sub: Update to 2003-05-09 version.
+
+2003-05-13 Michael Eager <eager@mvista.com>
+
+ * configure.in: Correct sed script so that options in quotes are not
+ deleted.
+ * configure: Rebuild.
+
+2003-05-12 Corinna Vinschen <corinna@vinschen.de>
+
+ * configure.in (FLAGS_FOR_TARGET): Remove $$s/newlib/libc/sys/cygwin
+ and $$s/newlib/libc/sys/cygwin32 include paths.
+ * configure: Ditto.
+
+2003-05-12 Michael Meissner <gnu@the-meissners.org>
+
+ * MAINTAINERS: Update my email addresses.
+
+2003-05-06 Eric Botcazou <ebotcazou@libertysurf.fr>
+
+ * config-ml.in: Propagate INSTALL variables.
+
+2003-05-04 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
+
+ * MAINTAINERS: Remove duplicate entries in Write After Approval.
+
+2003-05-02 Chris Demetriou <cgd@broadcom.com>
+
+ * Makefile.tpl: Require "makeinfo" from texinfo 4.2 or later.
+ * Makefile.in: Regenerate.
+
+2003-05-02 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (GNATS only): Add Falk Hueffner.
+
+2003-04-30 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (GNATS only): Add Giovanni Bajo.
+
+2003-04-27 Daniel Jacobowitz <drow@mvista.com>
+
+ * Makefile.tpl: Clean $(BUILD_SUBDIR).
+ * Makefile.in: Regenerated.
+
+2003-04-25 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (Write After Approval): Upgrade myself from
+ GNATS only to write-after-approval. Update my mail address.
+
+2003-04-25 Loren J. Rittle <ljrittle@acm.org>
+
+ (OS Port Maintainers: freebsd): Add myself.
+
+2003-04-22 Mark Mitchell <mark@codesourcery.com>
+
+ * MAINTAINERS (java): Remove Alexandre Petit-Bianco.
+
+2003-04-22 Kean Johnston <jkj@sco.com>
+
+ * MAINTAINERS (SCO ports): Added myself.
+
+2003-04-21 Nathan Sidwell <nathan@codesourcery.com>
+
+ * MAINTAINERS (gcov): Add myself and Jan Hubicka.
+
+2003-04-19 Kean Johnston <jkj@sco.com>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-04-18 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
+
+ * Makefile.tpl (MAKEINFOFLAGS): Default to --split-size=5000000.
+ * Makefile.in: Regenerate.
+
+2003-04-18 Jakub Jelinek <jakub@redhat.com>
+
+ * configure.in (powerpc64*-*-linux*): Remove.
+ * configure: Rebuilt.
+
+2003-04-17 Phil Edwards <pme@gcc.gnu.org>
+
+ * Makefile.tpl (GCC_STRAP_TARGETS): New variable containing all the
+ previous bootstrap targets, plus bubblestrap, quickstrap, cleanstrap,
+ and restrap.
+ * Makefile.in: Regenerate.
+
+2003-04-16 Richard Earnshaw <rearnsha@arm.com>
+
+ * configure.in (arm-*-netbsdelf*): Enable building java libraries.
+ * configure: Regenerated.
+
+2003-04-15 DJ Delorie <dj@redhat.com>
+
+ * MAINTAINERS: Remove myself as windows/cygwin/mingw maintainer.
+
+2003-04-13 Nick Clifton <nickc@redhat.com>
+
+ * config-ml.in: Remove support for --disable-aix removing
+ call-aix multilibs.
+
+2003-04-10 Alexandre Oliva <aoliva@redhat.com>
+
+ * libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on mips*.
+ * */configure: Rebuilt.
+
+2003-04-08 Joel Sherrill <joel@oarcorp.com>
+
+ * MAINTAINERS: Add my email address.
+
+2003-03-17 Olivier Hainque <hainque@act-europe.fr>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-03-14 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES back down.
+ * Makefile.in: Regenerate.
+
+2003-03-14 Michael Chastain <mec@shout.net>
+
+ * Makefile.in: Regenerate with correct Makefile.def.
+
+2003-03-12 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES up. Delete unused
+ Make macro.
+ * Makefile.in: Regenerate.
+ * configure.in: Clean up gxx_include_dir logic.
+ * configure: Regenerate.
+
+2003-03-12 Ansgar Esztermann <ansgar@thphy.uni-duesseldorf.de>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-03-10 Ben Elliston <bje@wasabisystems.com>
+
+ * MAINTAINERS: Update my mail address.
+
+2003-03-09 Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
+
+ * configure.in (gxx_include_dir): Fix typo.
+ * configure: Regenerated.
+
+2003-03-04 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Reindent.
+ * Makefile.in: Regenerate.
+ * configure.in: Reindent. Don't set unused variables.
+ * configure: Regenerate.
+
+2003-03-04 Daniel Jacobowitz <drow@mvista.com>
+
+ * configure.in: Include $(build_tooldir)/sys-include in
+ FLAGS_FOR_TARGET.
+ * configure: Regenerated.
+
+2003-03-04 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Always pass down RANLIB.
+ * Makefile.in: Regenerate.
+
+ * Makefile.tpl: Don't set unused enable_shared, enable_threads macros.
+ * Makefile.in: Regenerate.
+ * configure.in: Remove unused logic relating to --enable-shared
+ and --enable-threads. Remove bogus comments. Remove redundant
+ noconfigdirs.
+ * configure: Regenerate.
+
+ * configure.in: Replace ${libstdcxx_version} by its value.
+ Remove reference to mh-dgux.
+ * configure: Regenerate.
+
2003-03-03 Kevin Buettner <kevinb@redhat.com>
* MAINTAINERS (Write After Approval): Add myself.
--- /Users/regress/tbox/changelog_pass/gcc/gcc/ChangeLog Mon Mar 3 13:27:03 2003
+++ gcc/gcc/ChangeLog Tue Jun 17 04:15:30 2003
@@ -1,21217 +1,19181 @@
-Mon Mar 3 20:45:25 2003 J"orn Rennecke <joern.rennecke@superh.com>
+2003-06-17 Eric Botcazou <ebotcazou@libertysurf.fr>
- * config/sh/sh.h (EXTRA_SPECS): Add subtarget_asm_relax_spec and
- subtarget_asm_isa_spec.
- (SUBTARGET_ASM_RELAX_SPEC, SUBTARGET_ASM_ISA_SPEC): Define.
- (ASM_SPEC): Define as SH_ASM_SPEC.
- (SH_ASM_SPEC): New; take the role of ASM_SPEC, but safe from svr4.h.
- Use subtarget_asm_relax_spec and subtarget_asm_isa_spec.
- * config/sh/elf.h (ASM_SPEC): Use SH_ASM_SPEC.
- (SUBTARGET_ASM_ISA_SPEC): Undef / define.
+ * config/sparc/sparc.c (sparc_va_arg): Don't align 16-byte+ structures.
- * sh.h (OVERRIDE_OPTIONS): Set default values for align_loops
- and align_jumps if not set.
- Force align_jumps to be at least 2.
- When relaxing, force align_functions to be at least the maximum of
- align_loops, align_jumps and 4.
- * sh.c (find_barrier, barrier_align): Honour align_jumps_log.
- (sh_loop_align): Honour align_loops_log.
+2003-06-17 Eric Botcazou <ebotcazou@libertysurf.fr>
- * sh.md (length attribute): Use prev_nonnote_insn instead of PREV_INSN
- to check for indirect_jump_scratch.
- (indirect_jump_scratch): Add second set.
- * sh.c (output_far_jump): Use prev_nonnote_insn instead of PREV_INSN
- when looking for indirect_jump_scratch.
- Extract scratch register taking new structure of indirect_jump_scratch
- into account.
- (gen_block_redirect): Set INSN_SCOPE for indirect_jump_scratch.
+ * dbxout.c (dbxout_source_line_counter): New global variable.
+ Mark it with GTY(()).
+ (dbxout_source_line): Increment dbxout_source_line_counter
+ and pass it to ASM_OUTPUT_SOURCE_LINE.
+ * sdbout.c (sdbout_source_line_counter): New global variable.
+ Mark it with GTY(()).
+ (unnamed_struct_number): Mark it with GTY(()).
+ (sdbout_source_line): Increment sdbout_source_line_counter
+ and pass it to ASM_OUTPUT_SOURCE_LINE.
+ * xcoffout.c (ASM_OUTPUT_SOURCE_LINE): Add third parameter
+ (xcoffout_source_line): Pass 0 as third argument to
+ ASM_OUTPUT_SOURCE_LINE.
+ (xcoffout_begin_prologue): Likewise.
+ * config/dbxout.h (ASM_OUTPUT_SOURCE_LINE): Add third parameter.
+ Use it instead of 'sym_lineno' but without incrementing it.
+ * config/dbxelf.h (ASM_OUTPUT_SOURCE_LINE): Likewise.
+ * config/lynx.h (ASM_OUTPUT_SOURCE_LINE): Likewise.
+ * config/ptx4.h (ASM_OUTPUT_SOURCE_LINE): Likewise.
+ * config/alpha/alpha.c (alpha_start_function): Pass 0 as third
+ argument to ASM_OUTPUT_SOURCE_LINE.
+ * config/alpha/alpha.h (ASM_OUTPUT_SOURCE_LINE): Add third parameter.
+ * config/arm/aout.h: Remove useless comment.
+ * config/avr/avr.h (ASM_OUTPUT_SOURCE_LINE): Add third parameter.
+ * config/i960/i960.h (ASM_OUTPUT_SOURCE_LINE): Likewise.
+ * config/m32r/m32r.h (ASM_OUTPUT_SOURCE_LINE): Add third parameter.
+ Use it instead of 'sym_lineno' but without incrementing it.
+ * config/m68k/hp320.h (ASM_OUTPUT_SOURCE_LINE): Add third parameter.
+ * config/mcore/mcore-pe.h (ASM_OUTPUT_SOURCE_LINE): Add third
+ parameter. Use it instead of 'sym_lineno' but without incrementing it.
+ * config/mips/mips.c (mips_output_function_prologue): Pass 0 as third
+ argument to ASM_OUTPUT_SOURCE_LINE.
+ * config/mips/mips.h (ASM_OUTPUT_SOURCE_LINE): Add third parameter.
+ * config/mmix/mmix.h (ASM_OUTPUT_SOURCE_LINE): Likewise.
+ * config/pa/som.h (ASM_OUTPUT_SOURCE_LINE): Add third parameter.
+ Use it instead of 'sym_lineno' but without incrementing it.
+ * config/rs6000/linux64.h (ASM_OUTPUT_SOURCE_LINE): Likewise.
+ * config/sh/elf.h (ASM_OUTPUT_SOURCE_LINE): Likewise.
+ * config/sparc/aout.h (ASM_OUTPUT_SOURCE_LINE): Likewise.
+ * config/sparc/pbd.h (ASM_OUTPUT_SOURCE_LINE): Likewise.
+ * doc/tm.texi (ASM_OUTPUT_SOURCE_LINE): Document third parameter.
+
+2003-06-17 Richard Sandiford <rsandifo@redhat.com>
+
+ * config/mips/mips-protos.h (mips_expand_block_move): Declare.
+ (expand_block_move, output_block_move): Remove.
+ * config/mips/mips.h (enum block_move_type): Remove.
+ * config/mips/mips.c (block_move_call, output_block_move): Remove.
+ (mips_block_move_straight, mips_adjust_block_mem): New function.
+ (mips_block_move_loop): Renamed and reworked from block_move_loop.
+ (mips_expand_block_move): Likewise expand_block_move. Return false
+ to fall back on the target-independent code.
+ * config/mips/mips.md (movstrsi): Use mips_expand_block_move.
+ (movstrsi_internal*): Remove.
+
+2003-06-16 Zack Weinberg <zack@codesourcery.com>
+
+ * cpplib.h, cpphash.h, cppcharset.c, cpperror.c, cppexp.c
+ * cppfiles.c, cpphash.c, cppinit.c, cpplex.c, cpplib.c
+ * cppmacro.c, cpppch.c, cpptrad.c, cppspec.c: Convert to
+ ISO C: new-style function declarations, no need for PARAMS,
+ no special punctuation on indirect function calls, use string
+ constant concatenation where convenient.
+
+2003-06-17 Andreas Jaeger <aj@suse.de>
+
+ * rtl.h: Remove declarations from coverage.h.
+ * toplev.c: Include coverage.h.
+ * Makefile.in (toplev.o): Depend on coverage.h.
+
+ * toplev.h: Remove extra declaration of print_time.
+
+ * gengtype.c (close_output_files): Remove duplicated declaration.
+
+2003-06-16 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * config/sparc/sysv4.h: Remove target-independent comment;
+ replace "GNU CC" with "GCC".
+ * config/vxworks.h: Replace "GNU compiler" with "GCC".
+ * config/sparc/aout.h, config/sparc/biarch64.h, config/sparc/elf.h,
+ config/sparc/freebsd.h, config/sparc/linux.h, config/sparc/linux64.h,
+ config/sparc/lite.h, config/sparc/litecoff.h, config/sparc/liteelf.h,
+ config/sparc/netbsd-elf.h, config/sparc/openbsd.h,
+ config/sparc/rtemself.h, config/sparc/sol2-64.h,
+ config/sparc/sol2-bi.h, config/sparc/sol2-gas-bi.h,
+ config/sparc/sol2-gld-bi.h, config/sparc/sol2-gld.h,
+ config/sparc/sol2.h, config/sparc/sp64-aout.h,
+ config/sparc/sp64-elf.h, config/sparc/sp86x-elf.h,
+ config/sparc/sparc-protos.h, config/sparc/sysv4-only.h: Replace
+ "GNU compiler", "GNU CC" with "GCC".
+ * config/sparc/cypress.md, config/sparc/hypersparc.md,
+ config/sparc/sparc-modes.def, config/sparc/sparc.c,
+ config/sparc/sparc.md, config/sparc/sparclet.md,
+ config/sparc/supersparc.md, config/sparc/ultra1_2.md,
+ config/sparc/ultra3.md: Replace "GNU CC", "GNU Compiler", and
+ "GNU C Compiler" with "GCC".
+ * config/ip2k/ip2k.h: Replace "GNU CC" and "GNU compiler" with "GCC".
+
+2003-06-16 Aldy Hernandez <aldyh@redhat.com>
+
+ * simplify-rtx.c (simplify_subreg): Do not over-extend vector
+ constants.
+
+ * testsuite/gcc.c-torture/execute/simd-4.c: New.
+
+2003-06-16 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * config/ip2k/ip2k.h: Remove target-independent comments.
+
+ * config.gcc: Explicitly mention elfos.h in ip2k entry.
+ * config/ip2k/ip2k.h: Don't #include it here.
+
+2003-06-16 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+
+ * bitmap.c, builtins.c, c-incpath.c, cgraph.c, config/frv/frv.c,
+ config/mips/mips.c, cppfiles.c, cpphash.c, cppinit.c, cpplib.c,
+ dwarf2out.c, dwarfout.c, except.c, expr.c, expr.h, fold-const.c,
+ function.c, gcc.c, genoutput.c, gensupport.c, global.c,
+ haifa-sched.c, hashtable.c, ifcvt.c, integrate.c, local-alloc.c,
+ loop.c, mips-tdump.c, mips-tfile.c, mkdeps.c, protoize.c,
+ read-rtl.c, recog.h, reload1.c, sbitmap.c, ssa-dce.c,
+ stringpool.c, tlink.c, tree.c, varasm.c, varray.c: Don't use
+ the PTR macro.
+
+ * gengtype.c: Don't use UNION_INIT_ZERO.
+ * system.h (UNION_INIT_ZERO): Delete.
+
+2003-06-16 Richard Henderson <rth@redhat.com>
+
+ * simplify-rtx.c (simplify_subreg): Use GET_MODE_SIZE instead of
+ GET_MODE_UNIT_SIZE when simplifying constant vectors.
+
+2003-06-16 Andreas Jaeger <aj@suse.de>
+
+ * timevar.c (get_run_time): Remove function provided also by
+ libiberty.
+ * timevar.h: Remove get_run_time declaration.
+
+2003-06-16 Kazu Hirata <kazu@cs.umass.edu>
+
+ * config/m68hc11/m68hc11.c (m68hc11_rtx_costs): Remove
+ unreachable code.
+
+2003-06-16 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+
+ * builtin-attrs.def, builtin-attrs.def, builtins.c, cpplex.c,
+ cpplib.c, gencheck.c, gengenrtl.c, machmode.def, protoize.c: Don't
+ use macros from "symcat.h", instead rely on ISO C.
-Mon Mar 3 19:07:21 CET 2003 Jan Hubicka <jh@suse.cz>
+ * system.h: Don't include "symcat.h".
+ * configure.in (AC_C_STRINGIZE): Delete.
+ * config.in, configure: Regenerate.
- * calls.c (rtx_for_function_call): Take the address as an argument
- (expand_call): Do not modify the expression.
+2003-06-16 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
- * toplev.c (rest_of_compilation): Avoid cfg_cleanup calls when not
- optimizing.
+ * Makefile.in (install-mkheaders): Use INSTALL_SCRIPT for scripts.
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+ * tree.h (STMT_CHECK): New macro.
+ Also upper-case argument names on all checking macros and
+ fix some whitespace problems; assume CODE argument does not
+ have side-effects.
- * config/h8300/h8300.md (*ixorsi3_zext_hi): Restrict to
- TARGET_H8300H and TARGET_H8300S.
+2003-06-16 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+ * scan.h: Convert to ISO C.
+ * system.h: Likewise.
- * config/h8300/h8300.md (a peephole2): New.
+ * c-format.c (dynamic_format_types): New pointer for dynamic data.
+ (find_length_info_modifier_index, init_dynamic_asm_fprintf_info):
+ New functions split out of...
+ (handle_format_attribute): ...here.
+
+2003-06-16 J"orn Rennecke <joern.rennecke@superh.com>
+
+ * sh.h (REG_CLASS_FROM_LETTER): Change to:
+ (REG_CLASS_FROM_CONSTRAINT).
+ (CONST_OK_FOR_I): Rename to:
+ (CONST_OK_FOR_I08). Changed all users.
+ (CONST_OK_FOR_J): Rename to:
+ (CONST_OK_FOR_I16). Changed all users.
+ (CONST_OK_FOR_K): Rename to:
+ (CONST_OK_FOR_P27). Changed all users.
+ (CONST_OK_FOR_L): Rename to:
+ (CONST_OK_FOR_K08). Changed all users.
+ (CONST_OK_FOR_O): Rename to:
+ (CONST_OK_FOR_I06). Changed all users.
+ (CONST_OK_FOR_P): Rename to:
+ (CONST_OK_FOR_I10). Changed all users.
+ (CONSTRAINT_LEN, CONST_OK_FOR_I, CONST_OK_FOR_J16): Define.
+ (CONST_OK_FOR_J, CONST_OK_FOR_K, CONST_OK_FOR_P): Likewise.
+ (EXTRA_CONSTRAINT_A, EXTRA_CONSTRAINT_Bsc): Likewise.
+ (EXTRA_CONSTRAINT_B, PIC_OFFSET_P, PIC_DIRECT_ADDR_P): Likewise.
+ (EXTRA_CONSTRAINT_Cpg, EXTRA_CONSTRAINT_C): Likewise.
+ (EXTRA_MEMORY_CONSTRAINT,(EXTRA_CONSTRAINT_Sr0): Likewise.
+ (CONST_OK_FOR_LETTER_P): Replace with
+ (CONST_OK_FOR_CONSTRAINT_P).
+ (EXTRA_CONSTRAINT_S): Rename to:
+ (EXTRA_CONSTRAINT_C16). Changed all users.
+ (MOVI_SHORI_BASE_OPERAND_P): Don't allow direct addresses.
+ (EXTRA_CONSTRAINT_T): Rename to:
+ (EXTRA_CONSTRAINT_Csy). Changed all users.
+ (EXTRA_CONSTRAINT_Z): Remove.
+ (EXTRA_CONSTRAINT): Replace with:
+ (EXTRA_CONSTRAINT_STR).
+ (EXTRA_CONSTRAINT_U): Rename to:
+ (EXTRA_CONSTRAINT_Z). Changed all users.
+ * sh.c (and_operand): Use CONST_OK_FOR_J16.
+ * sh.md (cmpeqsi_t-1, cmpeqsi_t, adddi3_media): Use new constraints.
+ (addsi3_media, addsi3_compact, andsi3_compact, anddi3): Likewise.
+ (iorsi3, iordi3, xorsi3, xordi3, ashlsi3_std, ashlhi3_k): Likewise.
+ (lshrsi3_k, movsi_i, movsi_ie, movsi_i_lowpart, movsi_media): Likewise.
+ (movsi_media_nofpu, movqi_media, movhi_i, movhi_media): Likewise.
+ (*movdi_i, movdi_media, movdi_media_nofpu, shori_media): Likewise.
+ (movdf_media, movdf_media_nofpu, movv2sf_i, movv4sf_i): Likewise.
+ (movsf_media, movsf_media_nofpu, movsi_y, beq_media): Likewise.
+ (beq_media_i, bne_media, pt, ptb, movv8qi_i, movv2hi_i): Likewise.
+ (movv4hi_i, movv2si_i, negcmpeqv8qi, negcmpeqv2si): Likewise.
+ (negcmpeqv4hi, negcmpgtuv8qi, negcmpgtv2si, negcmpgtv4hi): Likewise.
+ (mcmv, mcnvs_lw, mcnvs_wb, mcnvs_wub, mextr_rl, mextr_lr): Likewise.
+ (mextr1, mextr2, mextr3, mextr4, mextr5, mextr6, mextr7): Likewise.
+ (mperm_w, mperm_w_little, mperm_w_big, msad_ubq_i): Likewise.
+ (mshards_q, mshfhi_b, mshflo_b, mshf4_b, mshf0_b, mshfhi_l): Likewise.
+ (mshflo_l, mshf4_l, mshf0_l, mshfhi_w, mshflo_w, mshf4_w): Likewise.
+ (mshf0_w, mshflo_w_x, mshfhi_l_di, mshfhi_l_di_rev): Likewise.
+ (mshflo_l_di_rev, mshflo_l_di_x, concat_v2sf): Likewise.
+ (mshflo_l_di_x_rev, subv2si3, subv4hi3, sssubv2si3): Likewise.
+ (sssubv4hi3): Likewise.
+ (movsf_i): Change I[08]/r to G/r.
+ (movsf_ie): Change f/{G,H}/c/X to f/{G,H}/c/Bsc.
+
+ * sh.c (sh_output_mi_thunk): Use CONST_OK_FOR_ADD.
+
+2003-06-16 Vladimir Makarov <vmakarov@redhat.com>
+
+ * config/i386/i386.c (ix86_memory_move_cost): Fix typo.
+
+2003-06-16 Andreas Jaeger <aj@suse.de>
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+ * basic-block.h: Remove duplicate prototype of
+ note_prediction_to_br_prob.
- * config/h8300/h8300.md (*extzv_8_8): Use shorter code when
- operands[0] and operands[1] are different.
+ * tree.h: Remove duplicate prototype of strip_float_extensions.
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-16 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
- * reload1.c (reload_cse_move2add): Remove variable success.
+ * config/c4x/c4x.c: Don't include "c-tree.h".
+ * config/pa/pa.c: Likewise.
+ * langhooks.c: Likewise.
+ * tree.h (poplevel): Declare.
-2003-03-02 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+2003-06-16 Kazu Hirata <kazu@cs.umass.edu>
- * ggc-common.c (ggc_rlimit_bound): Cast RLIM_INFINITY to avoid
- warnings.
+ * config/h8300/h8300.c (const_costs): Move this to ...
+ (h8300_rtx_costs): ... here.
-2003-03-02 Richard Henderson <rth@redhat.com>
+2003-06-16 Roger Sayle <roger@eyesopen.com>
- * configure.in (HAVE_AS_LTOFFX_LDXMOV_RELOCS): New ia64 test.
- * config.in, configure: Rebuild.
- * config/ia64/ia64.c (ia64_ld_address_bypass_p): Accept lo_sum.
- * config/ia64/ia64.md (load_symptr): Use high/lo_sum for the
- paired ldtoffx and ldxmov annotations.
- (load_symptr_internal1): Remove.
- (load_symptr_high, load_symptr_low): New.
+ * optabs.h (enum optab_index): Add new OTI_tan and OTI_atan.
+ (tan_optab, atan_optab): Define corresponding macros.
+ * optabs.c (init_optabs): Initialize tan_optab and atan_optab.
+ * genopinit.c (optabs): Implement tan_optab and atan_optab
+ using tan?f2 and atan?f2 patterns.
+ * builtins.c (expand_builtin_mathfn): Handle BUILT_IN_TAN{,F,L}
+ using tan_optab, and BUILT_IN_ATAN{,F,L} using atan_optab.
+ Change the default value of errno_set to false.
+ (expand_builtin): Expand BUILT_IN_TAN{,F,L} and BUILT_IN_ATAN{,F,L}
+ using expand_builtin_mathfn.
-2003-03-02 Neil Booth <neil@daikokuya.co.uk>
+ * config/i386/i386.md (atansf2, atandf2, atanxf2, atantf2): New
+ expander patterns implemented using existing atan2?f3 patterns.
- * c-incpath.c (add_path): Fix sysp assignment.
+2003-06-16 Roger Sayle <roger@eyesopen.com>
-2003-03-02 Kurt Garloff <garloff@suse.de>
+ * expr.c (expand_expr <PLUS_EXPR>): If operand_equal_p considers
+ both operands of the addition equal, reuse the expanded RTL.
+ (expand_expr <MULT_EXPR>): Likewise for multiplication.
- * params.def: Introduce parameter max-inline-insns-rtl for
- a separate limit for the RTL inliner.
- * params.h: Likewise.
- * integrate.c (function_cannot_inline_p): Use it.
- * toplev.c (decode_f_option): Set multiple parameters
- controlling inlining with -finline-limit.
- * params.def: Fix orthographic and typographic errors.
- * doc/invoke.texi: Document parameters controlling inlining
- and the way -finline-limit sets multiple of them.
+2003-06-16 Roger Sayle <roger@eyesopen.com>
+ Jeff Law <law@redhat.com>
- * tree.h (struct tree_decl): Introduce inlined_function_flag,
- recording whether the function became eligible for inlining
- by a compiler flag rather than the declaration.
- Provide DID_INLINE_FUNC macro to access it.
- * c-decl.c (grokdeclarator): Set DID_INLINE_FUNC.
- * cp/decl.c (grokfndecl): Likewise.
- * toplev.c (rest_of_compilation): Likewise.
- * cp/optimize (maybe_clone_body): Copy DID_INLINE_FUNC.
- * print-tree.c (print_node): Report it.
- * params.def: Introduce new max-inline-insns-auto limit.
- * params.h: Likewise.
- * tree-inline.c (inlinable_function_p): Apply it to functions
- with DID_INLINE_FUNC set.
- * toplev.c (decode_f_option): Initialize it from -finline-limit
- value.
- * doc/invoke.texi: Document new parameter.
+ * fold-const.c (operand_equal_p): Consider two calls to "const"
+ functions with identical non-volatile arguments to be equal.
+ Consider the FUNCTION_DECL for the "__builtin_foo" form of a
+ built-in function to be equal to the "foo" form.
-2003-03-02 Geoffrey Keating <geoffk@apple.com>
+2003-06-16 Nathanael Nerode <neroden@gcc.gnu.org>
- * fix-header.c (read_scan_file): Don't reference simplify_path.
+ * config/rs6000/sysv4le.h: Remove target-independent comment.
+ Replace "GNU compiler" with "GCC" in comment.
-2003-03-02 Stephane Carrez <stcarrez@nerim.fr>
+2003-06-16 Andreas Jaeger <aj@suse.de>
- * config/m68hc11/m68hc11.c (m68hc11_override_options): Don't enable
- min/max instructions by default as may result in reload errors.
+ * tracer.c: Remove duplicate declaration.
-2003-03-02 Stephane Carrez <stcarrez@nerim.fr>
+ * toplev.c: Remove extra declaration of decode_d_option.
- * config/m68hc11/m68hc11.md ("mulqi3"): Allow address register to
- avoid reload problems; define split for it.
+ * ssa.c: Remove duplicate declaration.
-2003-03-02 Stephane Carrez <stcarrez@nerim.fr>
+ * sreal.c: Remove extra declaration of dump_sreal.
- * config/m68hc11/m68hc11.c (m68hc11_shift_operator): New function.
- * config/m68hc11/m68hc11-protos.h (m68hc11_shift_operator): Declare.
- * config/m68hc11/m68hc11.h (PREDICATE_CODES): Register.
- * config/m68hc11/m68hc11.md ("rotrhi3", "rotlhi3"): New patterns for
- rotatert and rotate.
- ("rotrhi3_const", "rotlhi3_const"): Rename of old 'rotrhi3' insns.
- ("*rotrhi3", "*rotlhi3"): New insn pattern for non-const rotatert.
- ("*rotrhi3_addr"): New split for shift insns on address register.
- ("*lshrhi3", "*ashrhi3", "*ashlhi3_2"): Use new split.
- * config/m68hc11/larith.asm (___rotlhi3): New asm function.
- (___rotrhi3): Likewise.
- * config/m68hc11/t-m68hc11-gas (LIB1ASMFUNCS): Build them.
+ * reload1.c: Remove duplicate declarations.
-2003-03-02 Neil Booth <neil@daikokuya.co.uk>
+ * integrate.c: Remove extra declaration of
+ set_decl_abstract_flags.
- * toplev.c (aux_base_name): Moved from toplev.h.
- (filename): Constify.
- (lang_dependent_init): Don't duplicate name.
- (process_options): Set aux_base_name here, not...
- (do_compile): ...here. Change protoype.
- (toplev_main): Move some code from do_compile.
- * toplev.h: Remove aux_base_name.
+ * flow.c: Remove extra declaration of dump_flow_info.
-2003-03-02 Kazu Hirata <kazu@cs.umass.edu>
+ * alias.c: Remove extra declaration of get_addr.
- * config/h8300/h8300-protos.h: Add a prototype for
- iorxor_operator.
- * config/h8300/h8300.c (print_operand): Handle 'c'.
- (iorxor_operator): New.
- * config/h8300/h8300.h (PREDICATE_CODES): Add iorxor_operator.
- * config/h8300/h8300.md (*iorhi3_zext): Remove.
- (*iorsi3_zexthi): Likewise.
- (*iorsi3_zextsi): Likewise.
- (*xorhi3_zextqi): Likewise.
- (*xorsi3_zexthi): Likewise.
- (*xorsi3_zextsi): Likewise.
- (*ixorhi3_zext): New.
- (*ixorsi3_zext_qi): Likewise.
- (*ixorsi3_zext_hi): Likewise.
+2003-06-16 Nathanael Nerode <neroden@gcc.gnu.org>
-2003-03-02 Neil Booth <neil@daikokuya.co.uk>
+ * config/rtems.h, config/sol2.h, config/svr4.h, config/usegas.h,
+ config/vxworks.h: GNU CC -> GCC.
- * c-incpath.c (remove_component_p, simplify_path): Move back to
- cppfiles.c.
- (remove_duplicates): Use cpp_simplify_path.
- * c-incpath.h (simplify_path): Remove.
- * c-lex.c: Don't include c-incpath.h.
- (init_c_lex): Remove simplify_path.
- * cppfiles.c (remove_component_p, cpp_simplify_path): Restore.
- (find_or_create_entry, validate_pch): Revert.
+ * convert.c, dwarf2out.c, dwarfout.c, emit-rtl.c, function.c,
+ lists.c, print-rtl.c, print-tree.c, read-rtl.c, rtl-error.c,
+ stmt.c, toplev.c, integrate.h, loop.h, machmode.h, rtl.h,
+ ssa.h, tree.def: Replace overly specific references to "GNU C"
+ and "GNU C Compiler" with references to "GCC".
-2003-03-02 Ashif Harji <asharji@uwaterloo.ca>
+2003-06-16 J"orn Rennecke <joern.rennecke@superh.com>
- * gcc.c (default_compilers): Add -no-integrated-cpp flag to invoke
- an external cpp during compilation.
- (option_map): Likewise.
- * objc/lang-specs.h (default_compilers): Similarly.
- * doc/invoke.texi: Document -no-integrated-cpp flag.
+ * sh.c (prepare_move_operand): Check if operand 0 is an invalid
+ memory reference. Fix test that checks if operand 1 is using r0.
+ * sh.md (movhi_i): Don't allow st.w r0,@(rX,rY) .
-2003-03-02 Kazu Hirata <kazu@cs.umass.edu>
+ * defaults.h (REG_CLASS_FROM_CONSTRAINT): Only define if not already
+ defined.
- * config/h8300/h8300.md (zero_extendqisi2): Change to an
- expander.
- (*zero_extendqisi2_h8300): New.
- (*zero_extendqisi2_h8300hs): New.
- (two splitters): New.
+2003-06-15 Nathan Sidwell <nathan@codesourcery.com>
-2003-03-02 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+ * function.h (struct emit_status): Remove x_last_linenum,
+ x_last_filename. Add x_last_location.
+ * rtl.h: #include "input.h".
+ (NOTE_DATA): New.
+ * cfglayout.c (duplicate_insn_chain): Use emit_line_note for line
+ number notes.
+ * emit-rtl.c (last_linenum, last_filename): Remove.
+ (last_location): New.
+ (emit_line_note_after): LINE must always be >= 0.
+ (emit_line_note): Likewise. Check not duplicate here...
+ (emit_note): ... rather than here.
+ (emit_line_note_force, force_next_line_note, init_emit): Adjust.
+ * integrate.c (expand_inline_function): Use emit_line_note for
+ line number notes.
+ (copy_insn_list): Likewise.
+ * unroll.c (copy_loop_body): Likewise.
+ * Makefile.in (RTL_H): Add input.h.
+
+2003-06-16 Richard Sandiford <rsandifo@redhat.com>
+
+ * optabs.c (emit_libcall_block): Don't hoist insns past a label.
+
+2003-06-16 Richard Henderson <rth@redhat.com>
+
+ * config/alpha/alpha-protos.h, config/alpha/elf.h,
+ config/alpha/osf.h, config/alpha/unicosmk.h, config/alpha/vms.h,
+ config/alpha/vms-cc.c, config/alpha/vms-ld.c: Update to ISO C.
+ * config/alpha/alpha.c: Likewise. Move targetm init to end of file.
+ Remove unneeded static function decls.
+
+2003-06-16 Neil Booth <neil@daikokuya.co.uk>
+
+ * c-opts.c (c_common_handle_option): s/on/value/.
+ (OPT_fabi_version_, OPT_ftabstop_, OPT_ftemplate_depth_): Use value
+ directly rather than converting the argument.
+ * c.opt: Update docs. Use UInteger where appropriate.
+ * common.opt: Use UInteger where appropriate.
+ * opts.c (integral_argument): New.
+ (handle_argument): Handle integral arguments, and optional
+ joined arguments.
+ (common_handle_option): Update.
+ * opts.h (CL_MISSING_OK, CL_UINTEGER): New.
+ * opts.sh: Handle JoinedOrMissing and UInteger flags.
+
+2003-06-16 Neil Booth <neil@daikokuya.co.uk>
+
+ * config/rs6000/sysv4.h (ASM_OUTPUT_ALIGNED_LOCAL): Remove
+ unnecessary extern declaration.
+
+2003-06-15 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * config/gofast.h, config/interix.h, config/interix3.h,
+ config/libgloss.h, config/linux-aout.h, config/linux.h,
+ config/lynx-ng.h, config/lynx.h: GNU CC -> GCC.
+ * config/kaos.h: "GNU compiler" -> GCC.
+ * config/linux-aout.h, config/lynx.h: Clarify comment describing file.
+
+ * config/ip2k/crt0.S, config/ip2k/ip2k-protos.h,
+ config/ip2k/ip2k.c, config/ip2k/ip2k.md, config/ip2k/libgcc.S:
+ GNU CC -> GCC.
+
+ * config/svr3.h: Remove #if 0 code, misleading comments.
+ GNU CC -> GCC.
+
+2003-06-15 Zack Weinberg <zack@codesourcery.com>
+
+ * vmsdbgout.c (vmsdbgout_finish): Rename parameter to
+ main_input_filename to avoid conflict with input_filename macro.
+
+2003-06-15 Neil Booth <neil@daikokuya.co.uk>
+
+ * config/mips/mips.h (asm_file_name, g_switch_set,
+ g_switch_value): Remove.
+ * config/rs6000/sysv4.h (SUBTARGET_OVERRIDE_OPTIONS): Remove
+ unnecessary extern declarations.
+
+2003-06-15 Neil Booth <neil@daikokuya.co.uk>
+
+ * config/frv/frv.h: Remove declaration of g_switch_value.
+ * config/m32r/m32r.h: Remove declaration of g_switch_value.
+ * config/m68hc11/m68hc11.c: Remove declaration of asm_file_name.
+
+2003-06-15 Neil Booth <neil@daikokuya.co.uk>
+
+ * opts.sh: Quote '+' in regex.
+
+2003-06-15 Andrew Pinski <pinskia@physics.uc.edu>
+
+ * config/rs6000/t-rs6000: Add dependence of cfglayout.h to rs6000.o.
+ * config/rs6000/rs6000.c: Include cfglayout.h.
+ * config/alpha/alpha.c: Likewise.
+ * config/ia64/ia64.c: Likewise.
+ * config/sparc/sparc.c: Likewise.
+ * config/sh/sh.c: Likewise.
- * fp-bit.h (float_to_usi): Fix condition wrapping prototype.
+2003-06-15 Neil Booth <neil@daikokuya.co.uk>
-2003-03-01 Kazu Hirata <kazu@cs.umass.edu>
+ * opts.sh: Quote '+' in regex.
**** TRUNCATED ****
-------------- next part --------------
--
Geoffrey Keating <geoffk@apple.com>
(via an automated GCC regression-testing script.)
More information about the Gcc-regression
mailing list