5 GCC regressions, 0 new, with your patch on 2003-06-09T07:05:58Z.
GCC regression checker
geoffk@apple.com
Mon Jun 9 11:52:00 GMT 2003
With your recent patch, GCC has some regression test failures, which
used to pass. There are 0 new failures, and 5
failures that existed before and after that patch; 0 failures
have been fixed.
The old failures, which were not fixed or introduced by your patch, are:
native g++.sum g++.dg/conversion/to-virtual-base-1.C
native g77.sum g77.f-torture/compile/20010321-1.f,
native g77.sum g77.f-torture/execute/980520-1.f
native gcc.sum gcc.c-torture/execute/20000412-3.c
native gcc.sum gcc.dg/warn-1.c
For more information, see http://gcc.gnu.org/regtest/.
-------------- next part --------------
ChangeLog entries since last run on 2003-06-09T02:23:25Z:
--- /Users/regress/tbox/changelog_mail/gcc/gcc/ChangeLog Sun Jun 8 19:23:59 2003
+++ gcc/gcc/ChangeLog Mon Jun 9 00:06:39 2003
@@ -1,3 +1,72 @@
+2003-06-09 Richard Sandiford <rsandifo@redhat.com>
+
+ * config/mips/mips.c (mips_reg_names): Change hilo entry to "".
+ (mips_sw_reg_names): Likewise.
+ (mips_regno_to_class): Change hilo entry to NO_REGS.
+ (hilo_operand): Use MD_REG_P.
+ (extend_operator): New predicate.
+ (override_options): Remove 'a' constraint.
+ (mips_secondary_reload_class): Remove hilo handling. Also remove
+ handling of (plus sp reg) reloads for mips16.
+ (mips_register_move_cost): Remove hilo handling.
+ * config/mips/mips.h (FIXED_REGISTERS): Make hilo entry fixed.
+ (MD_REG_LAST): Remove hilo from range.
+ (HILO_REGNUM): Delete.
+ (reg_class): Remove HILO_REG and HILO_AND_GR_REGS.
+ (REG_CLASS_NAMES, REG_CLASS_CONTENTS): Update accordingly.
+ (PREDICATE_CODES): Add entry for extend_operator.
+ (DEBUG_REGISTER_NAMES): Change hilo entry to "".
+ * config/mips/mips.md: Remove hilo clobbers wherever they occur.
+ Remove constraints from multiplication define_expands. Remove
+ clobbers from "decorative" define_expand patterns.
+ (UNSPEC_HILO_DELAY): Delete.
+ (*mul_acc_si, *mul_sub_si): Add early-clobber to operand 6.
+ (mulsidi3, umulsidi3): Change pattern to match the TARGET_64BIT case.
+ Adjust C code to just emit insns for !TARGET_64BIT.
+ (mulsidi3_internal): Rename to mulsidi3_32bit.
+ (mulsidi3_64bit): Use a "d" constraint for the destination.
+ Use extend_operator so that the pattern can handle umulsidi3 as well.
+ Split the instruction after reload.
+ (*mulsidi3_64bit_parts): New pattern, generated by mulsidi3_64bit.
+ (umulsidi3_internal): Rename to umulsidi3_32bit.
+ (umulsidi3_64bit): Remove.
+ (*smsac_di, *umsac_di): Line-wrap fixes.
+ (udivsi3_internal): Don't allow operand 2 to be constant.
+ (udivdi3_internal, umodsi3_internal, umoddi3_internal): Likewise.
+ (movdi_internal2, movsi_internal): Remove hilo alternatives.
+ (reload_in[sd]i, reload_out[sd]i, hilo_delay): Remove.
+
+2003-06-09 Richard Sandiford <rsandifo@redhat.com>
+
+ PR target/10913
+ * config/mips/mips.h (TARGET_FILE_SWITCHING, NO_DBX_FUNCTION_END,
+ PUT_SDB_SCL, PUT_SDB_INT_VAL, PUT_SDB_VAL, PUT_SDB_ENDEF,
+ PUT_SDB_TYPE, PUT_SDB_SIZE, PUT_SDB_DIM, PUT_SDB_START_DIM,
+ PUT_SDB_NEXT_DIM, PUT_SDB_LAST_DIM, PUT_SDB_TAG, PUT_SDB_SRC_FILE,
+ SDB_GENERATE_FAKE, TEXT_SECTION): Delete.
+ (PUT_SDB_DEF, PUT_SDB_PLAIN_DEF, PUT_SDB_BLOCK_START,
+ PUT_SDB_BLOCK_END, PUT_SDB_FUNCTION_END): Replace use of
+ asm_out_text_file with asm_out_file.
+ * config/mips/iris5gas.h (PUT_SDB_SIZE, PUT_SDB_TYPE): Likewise.
+ * config/mips/elf.h (TEXT_SECTION): Undefine.
+ * config/mips/elf64.h (TEXT_SECION): Undefine.
+ * config/mips/openbsd.h (TEXT_SECION): Undefine.
+ * config/mips/mips.c (asm_out_text_file, asm_out_data_file): Delete.
+ (override_options): Disable small-data optimizations unless using
+ gas or explicit relocations.
+ (mips_asm_file_start, mips_asm_file_end, mips_output_function_epilogue,
+ iris6_asm_named_section, iris6_asm_file_start): Remove code for
+ handling TARGET_FILE_SWITCHING.
+ (copy_file_data): Move into TARGET_IRIX6 block.
+
+2003-06-08 Richard Henderson <rth@redhat.com>
+
+ * expr.h (EXPAND_MEMORY): New.
+ * expr.c (expand_expr): Check it.
+ * stmt.c (expand_asm_operands): Provide it when the constraint
+ requires a memory. Warn for memory input constraints without
+ a memory operand.
+
2003-06-08 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* varasm.c: Don't include c-tree.h.
--- /Users/regress/tbox/changelog_mail/gcc/gcc/testsuite/ChangeLog Sun Jun 8 14:39:53 2003
+++ gcc/gcc/testsuite/ChangeLog Mon Jun 9 00:06:46 2003
@@ -1,3 +1,8 @@
+2003-06-08 Richard Henderson <rth@redhat.com>
+
+ * gcc.dg/20011029-2.c: Fix the array reference.
+ * gcc.dg/asm-7.c: New.
+
2003-06-08 Kazu Hirata <kazu@cs.umass.edu>
* gcc.c-torture/compile/20000804-1.x: Dsiable on h8300 port.
--- /Users/regress/tbox/changelog_mail/gcc/libiberty/ChangeLog Thu Jun 5 12:10:36 2003
+++ gcc/libiberty/ChangeLog Mon Jun 9 00:06:50 2003
@@ -1,3 +1,12 @@
+2003-06-09 Albert Chin-A-Young <china@thewrittenword.com>
+
+ PR bootstrap/10974
+ * physmem.c: Update comment.
+ * configure.in: Modify test for _system_configuration for older
+ AIX systems.
+
+ * config.in, configure: Regenerated.
+
2003-06-05 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
PR other/10810
ChangeLog entries between 2003-06-09T02:23:25Z and the last time everything
passed, on 2003-03-03T21:26:39Z:
--- /Users/regress/tbox/changelog_pass/gcc/ChangeLog Mon Mar 3 13:26:59 2003
+++ gcc/ChangeLog Thu Jun 5 12:10:16 2003
@@ -1,3 +1,265 @@
+Thu Jun 5 18:32:20 CEST 2003 Jan Hubicka <jh@suse.cz>
+
+ * Makefile.tpl (profiledbootstrap): New target.
+ * Makefile.in (profiledbootstrap): New target.
+
+2003-06-05 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (Bugzilla only): Add Dara Hazeghi and Andrew
+ Pinski. Remove user names from other bugzilla-only maintainers.
+
+2003-06-03 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Make 'recursive targets' using autogen rather
+ than shell loop. Remove duplicate 'clean' targets and false
+ comments.
+ * Makefile.def: Add systematic dependencies to 'recursive' targets.
+ Add systematic method of specifying missing targets in subdirs.
+ Add copyright boilerplate.
+ * Makefile.in: Regenerate.
+ * configure.in: Add 'recursive targets' to maybe list.
+ * configure: Regenerate.
+
+ * MAINTAINERS: "GNATS only" -> "Bug database only".
+
+ * Makefile.tpl: Rename [+target+] to [+make_target+].
+ * Makefile.def: Rename 'target' to 'make_target'.
+
+2003-05-31 Neil Booth <neil@daikokuya.co.uk>
+
+ * MAINTAINERS: Add self as options handling maintainer.
+
+2003-05-28 Michael Meissner <gnu@the-meissners.org>
+
+ * MAINTAINERS: Remove myself as m32r/v850 maintainer, since it has
+ been too long since I touched those ports.
+
+2003-05-28 DJ Delorie <dj@redhat.com>
+
+ * Makefile.tpl: Make maybe-check-gcc .PHONY.
+ * Makefile.in: Regenerate.
+
+2003-05-21 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
+
+ * configure.in: Use curly braces in the definition of tooldir.
+ * configure: Regenerate.
+
+2003-05-21 DJ Delorie <dj@redhat.com>
+
+ * Makefile.tpl (configure-target-libiberty): Depend only on gcc, not
+ newlib or libgloss.
+ * Makefile.in: Regenerate.
+
+2003-05-21 DJ Delorie <dj@redhat.com>
+
+ * Makefile.tpl: Add missing empty maybe-check-gcc target.
+ * Makefile.in: Regenerate.
+
+2003-05-20 Ian Lance Taylor <ian@airs.com>
+
+ * MAINTAINERS: Update my e-mail address.
+
+2003-05-19 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure.in: Switch more things to use maybe dependencies.
+ * Makefile.tpl: Switch more things to use maybe dependencies.
+ Factor out common code from autogen IF statements.
+ * configure: Regenerate.
+ * Makefile.in: Regenerate.
+
+2003-05-14 Kelley Cook <kelleycook@wideopenwest.com>
+
+ * configure.in: Accept i[3456789]86 for machine type.
+ * configure: Regenerate.
+
+2003-05-18 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure.in: Switch more things to use maybe dependencies.
+ Rearrange a little. Use GCC_TOPLEV_SUBDIRS.
+ * configure: Regenerate.
+ * Makefile.tpl: Switch more things to use maybe dependencies.
+ * Makefile.in: Regenerate.
+
+2003-05-16 Andreas Schwab <schwab@suse.de>
+
+ * Makefile.tpl (install-opcodes): Define.
+ * Makefile.in: Rebuild.
+
+2003-05-13 Andreas Jaeger <aj@suse.de>
+
+ * config.guess: Update to 2003-05-09 version.
+ * config.sub: Update to 2003-05-09 version.
+
+2003-05-13 Michael Eager <eager@mvista.com>
+
+ * configure.in: Correct sed script so that options in quotes are not
+ deleted.
+ * configure: Rebuild.
+
+2003-05-12 Corinna Vinschen <corinna@vinschen.de>
+
+ * configure.in (FLAGS_FOR_TARGET): Remove $$s/newlib/libc/sys/cygwin
+ and $$s/newlib/libc/sys/cygwin32 include paths.
+ * configure: Ditto.
+
+2003-05-12 Michael Meissner <gnu@the-meissners.org>
+
+ * MAINTAINERS: Update my email addresses.
+
+2003-05-06 Eric Botcazou <ebotcazou@libertysurf.fr>
+
+ * config-ml.in: Propagate INSTALL variables.
+
+2003-05-04 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
+
+ * MAINTAINERS: Remove duplicate entries in Write After Approval.
+
+2003-05-02 Chris Demetriou <cgd@broadcom.com>
+
+ * Makefile.tpl: Require "makeinfo" from texinfo 4.2 or later.
+ * Makefile.in: Regenerate.
+
+2003-05-02 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (GNATS only): Add Falk Hueffner.
+
+2003-04-30 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (GNATS only): Add Giovanni Bajo.
+
+2003-04-27 Daniel Jacobowitz <drow@mvista.com>
+
+ * Makefile.tpl: Clean $(BUILD_SUBDIR).
+ * Makefile.in: Regenerated.
+
+2003-04-25 Wolfgang Bangerth <bangerth@dealii.org>
+
+ * MAINTAINERS (Write After Approval): Upgrade myself from
+ GNATS only to write-after-approval. Update my mail address.
+
+2003-04-25 Loren J. Rittle <ljrittle@acm.org>
+
+ (OS Port Maintainers: freebsd): Add myself.
+
+2003-04-22 Mark Mitchell <mark@codesourcery.com>
+
+ * MAINTAINERS (java): Remove Alexandre Petit-Bianco.
+
+2003-04-22 Kean Johnston <jkj@sco.com>
+
+ * MAINTAINERS (SCO ports): Added myself.
+
+2003-04-21 Nathan Sidwell <nathan@codesourcery.com>
+
+ * MAINTAINERS (gcov): Add myself and Jan Hubicka.
+
+2003-04-19 Kean Johnston <jkj@sco.com>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-04-18 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
+
+ * Makefile.tpl (MAKEINFOFLAGS): Default to --split-size=5000000.
+ * Makefile.in: Regenerate.
+
+2003-04-18 Jakub Jelinek <jakub@redhat.com>
+
+ * configure.in (powerpc64*-*-linux*): Remove.
+ * configure: Rebuilt.
+
+2003-04-17 Phil Edwards <pme@gcc.gnu.org>
+
+ * Makefile.tpl (GCC_STRAP_TARGETS): New variable containing all the
+ previous bootstrap targets, plus bubblestrap, quickstrap, cleanstrap,
+ and restrap.
+ * Makefile.in: Regenerate.
+
+2003-04-16 Richard Earnshaw <rearnsha@arm.com>
+
+ * configure.in (arm-*-netbsdelf*): Enable building java libraries.
+ * configure: Regenerated.
+
+2003-04-15 DJ Delorie <dj@redhat.com>
+
+ * MAINTAINERS: Remove myself as windows/cygwin/mingw maintainer.
+
+2003-04-13 Nick Clifton <nickc@redhat.com>
+
+ * config-ml.in: Remove support for --disable-aix removing
+ call-aix multilibs.
+
+2003-04-10 Alexandre Oliva <aoliva@redhat.com>
+
+ * libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on mips*.
+ * */configure: Rebuilt.
+
+2003-04-08 Joel Sherrill <joel@oarcorp.com>
+
+ * MAINTAINERS: Add my email address.
+
+2003-03-17 Olivier Hainque <hainque@act-europe.fr>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-03-14 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES back down.
+ * Makefile.in: Regenerate.
+
+2003-03-14 Michael Chastain <mec@shout.net>
+
+ * Makefile.in: Regenerate with correct Makefile.def.
+
+2003-03-12 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES up. Delete unused
+ Make macro.
+ * Makefile.in: Regenerate.
+ * configure.in: Clean up gxx_include_dir logic.
+ * configure: Regenerate.
+
+2003-03-12 Ansgar Esztermann <ansgar@thphy.uni-duesseldorf.de>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2003-03-10 Ben Elliston <bje@wasabisystems.com>
+
+ * MAINTAINERS: Update my mail address.
+
+2003-03-09 Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
+
+ * configure.in (gxx_include_dir): Fix typo.
+ * configure: Regenerated.
+
+2003-03-04 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Reindent.
+ * Makefile.in: Regenerate.
+ * configure.in: Reindent. Don't set unused variables.
+ * configure: Regenerate.
+
+2003-03-04 Daniel Jacobowitz <drow@mvista.com>
+
+ * configure.in: Include $(build_tooldir)/sys-include in
+ FLAGS_FOR_TARGET.
+ * configure: Regenerated.
+
+2003-03-04 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Always pass down RANLIB.
+ * Makefile.in: Regenerate.
+
+ * Makefile.tpl: Don't set unused enable_shared, enable_threads macros.
+ * Makefile.in: Regenerate.
+ * configure.in: Remove unused logic relating to --enable-shared
+ and --enable-threads. Remove bogus comments. Remove redundant
+ noconfigdirs.
+ * configure: Regenerate.
+
+ * configure.in: Replace ${libstdcxx_version} by its value.
+ Remove reference to mh-dgux.
+ * configure: Regenerate.
+
2003-03-03 Kevin Buettner <kevinb@redhat.com>
* MAINTAINERS (Write After Approval): Add myself.
--- /Users/regress/tbox/changelog_pass/gcc/gcc/ChangeLog Mon Mar 3 13:27:03 2003
+++ gcc/gcc/ChangeLog Sun Jun 8 19:23:59 2003
@@ -1,21217 +1,17807 @@
-Mon Mar 3 20:45:25 2003 J"orn Rennecke <joern.rennecke@superh.com>
+2003-06-08 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
- * config/sh/sh.h (EXTRA_SPECS): Add subtarget_asm_relax_spec and
- subtarget_asm_isa_spec.
- (SUBTARGET_ASM_RELAX_SPEC, SUBTARGET_ASM_ISA_SPEC): Define.
- (ASM_SPEC): Define as SH_ASM_SPEC.
- (SH_ASM_SPEC): New; take the role of ASM_SPEC, but safe from svr4.h.
- Use subtarget_asm_relax_spec and subtarget_asm_isa_spec.
- * config/sh/elf.h (ASM_SPEC): Use SH_ASM_SPEC.
- (SUBTARGET_ASM_ISA_SPEC): Undef / define.
+ * varasm.c: Don't include c-tree.h.
- * sh.h (OVERRIDE_OPTIONS): Set default values for align_loops
- and align_jumps if not set.
- Force align_jumps to be at least 2.
- When relaxing, force align_functions to be at least the maximum of
- align_loops, align_jumps and 4.
- * sh.c (find_barrier, barrier_align): Honour align_jumps_log.
- (sh_loop_align): Honour align_loops_log.
+2003-06-08 Andreas Jaeger <aj@suse.de>
- * sh.md (length attribute): Use prev_nonnote_insn instead of PREV_INSN
- to check for indirect_jump_scratch.
- (indirect_jump_scratch): Add second set.
- * sh.c (output_far_jump): Use prev_nonnote_insn instead of PREV_INSN
- when looking for indirect_jump_scratch.
- Extract scratch register taking new structure of indirect_jump_scratch
- into account.
- (gen_block_redirect): Set INSN_SCOPE for indirect_jump_scratch.
+ * predict.h: Convert to ISO C90 prototypes.
+ * predict.c: Likewise.
+ * tree-dump.h: Likewise.
+ * tree-dump.c: Likewise.
+ * diagnostic.h: Likewise.
+ * diagnostic.c: Likewise.
+ * combine.c: Likewise.
-Mon Mar 3 19:07:21 CET 2003 Jan Hubicka <jh@suse.cz>
+ * rtl.h: Convert prototypes of combine.c to ISO C90.
- * calls.c (rtx_for_function_call): Take the address as an argument
- (expand_call): Do not modify the expression.
+Sun Jun 8 21:27:41 CEST 2003 Jan Hubicka <jh@suse.cz>
- * toplev.c (rest_of_compilation): Avoid cfg_cleanup calls when not
- optimizing.
+ * cfglayout.c (insn_scope): New static function
+ (block_locators_*, line_locators*, file_locators*): New static varrays.
+ (scope_to_insns_initialize): Use them.
+ (insn_line, insn_file): New functions.
+ (scope_to_insns_finalize): Use insn_scope.
+ (prologue_locator, epilogue_locator): New global variables.
+ * emit-rt.c (try_split, make_insn_raw, make_jump_insn_raw,
+ make_call_insn_raw, emit_copy_of_insn_after): Use locators.
+ (emit_insn_after_scope, emit_insn_before_scope
+ emit_jump_insn_after_scope, emit_jump_insn_before_scope
+ emit_call_insn_after_scope, emit_call_insn_before_scope): Rename to...
+ (emit_insn_after_setloc, emit_insn_before_setloc
+ emit_jump_insn_after_setloc, emit_jump_insn_before_setloc
+ emit_call_insn_after_setloc, emit_call_insn_before_setloc): ... these;
+ use locators.
+ * final.c (notice_source_line): Use locators.
+ (final_start_function): Set initial source file and line.
+ (final_scan_insn): Use locators.
+ * ifcvt.c (noce_try_store_flag, noce_try_store_flag_constants,
+ noce_try_addcc, noce_try_store_flag_mask, noce_try_cmove,
+ noce_try_cmove_arith, noce_try_minmax, noce_try_abs,
+ noce_process_if_block, find_cond_trap): Likewise.
+ * integrate.c (copy_insn_list): Likewise.
+ * jump.c (duplicate_loop_exit_test): LIkewise.
+ * print-rtl.c (print_rtx): Print locators.
+ * recog.c (peephole2_optimize): Likewise.
+ * rtl.h (INSN_SCOPE): Remove.
+ (emit_insn_after_scope, emit_insn_before_scope
+ emit_jump_insn_after_scope, emit_jump_insn_before_scope
+ emit_call_insn_after_scope, emit_call_insn_before_scope): Rename to...
+ (emit_insn_after_setloc, emit_insn_before_setloc
+ emit_jump_insn_after_setloc, emit_jump_insn_before_setloc
+ emit_call_insn_after_setloc, emit_call_insn_before_setloc): ... these;
+ (insn_file, insn_line, prologue_locator, epilogue_locator): Declare.
+ * unroll.c (copy_loop_body): Use locators.
+ * function.c (set_insn_locators): New function.
+ (thread_prologue_and_epilogue_insns): Set the locators accordingly.
+
+2003-06-08 Kazu Hirata <kazu@cs.umass.edu>
+
+ * config/h8300/h8300.h (LONG_LONG_TYPE_SIZE): Set to 64.
+ * config/h8300/t-h8300 (LIB1ASMFUNCS): Remove _floatdisf
+ _fixsfdi _fixunssfdi.
+ (LIB2FUNCS_EXTRA): Add entries for clzhi2, ctzhi2, parityhi2,
+ popcounthi2.
+ (TARGET_LIBGCC2_CFLAGS): Remove -DDI=SI.
+ * config/h8300/clzhi2.c: New.
+ * config/h8300/ctzhi2.c: Likewise.
+ * config/h8300/parityhi2.c: Likewise.
+ * config/h8300/popcounthi2.c: Likewise.
+
+Sun Jun 8 15:52:17 CEST 2003 Jan Hubicka <jh@suse.cz>
+
+ * i386.md (subsi_3_zext, sse2_nandv2di3): Fix predicates.
+ * i386.c (k8_avoid_jump_misspredicts): Fix debug output.
+
+ * cfg.c (verify_flow_info): Move IL independent checks from cfgrtl here.
+ (dump_bb): New based on old dump_bb in cfgrtl.c
+ (debug_bb, debug_bb_n): Move the functions from cfgrtl.c here.
+ * cfghooks.h (cfgh_verify_flow_info): Return status.
+ * cfglayout.c (cfg_layout_finalize): Verify CFG correctness.
+ * cfgrtl.c (debug_bb, debug_bb_n): Move to cfg.c
+ (dump_bb): Remove generic parts.
+ (rtl_verify_flow_info_1): Break out from rtl_verify_flow_info.
+ (rtl_verify_flow_info): Only check things dependeing on linearized RTL.
+
+2003-06-08 Neil Booth <neil@daikokuya.co.uk>
+
+ * Makefile.in: Rename options.c and options.h to c-options.c and
+ c-options.h.
+ (OBJS): Remove options.o.
+ * c-opts.c: Don'tInclude c-options.h instead of options.h.
+ * opts.c: Don't include options.h.
+ (find_opt): Can't use enum opt_code or N_OPTS.
+ * opts.h (struct cl_option, cl_options, cl_options_count): Move from...
+ * opts.sh: ... here.
+
+2003-06-07 Eric Botcazou <ebotcazou@libertysurf.fr>
+ Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
+
+ PR pch/9830
+ * ggc-common.c (HAVE_MMAP_FILE): Include sys/types.h
+ if HAVE_MINCORE is defined.
+ (MAP_FAILED): Define if not defined.
+ (gt_pch_save): Test against MAP_FAILED.
+ (gt_pch_restore): If HAVE_MINCORE, use MAP_FIXED to force
+ the mapping address to the preferred base after checking it
+ is possible to do so. Test against MAP_FAILED.
+ * configure.in: Test for the presence of mincore in libc.
+ * config.in: Regenerate.
+ * configure: Regenerate.
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-07 Richard Henderson <rth@redhat.com>
- * config/h8300/h8300.md (*ixorsi3_zext_hi): Restrict to
- TARGET_H8300H and TARGET_H8300S.
+ * config/alpha/alpha.c (alpha_setup_incoming_varargs): Fix
+ conditional compilation guard.
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-08 Kazu Hirata <kazu@cs.umass.edu>
- * config/h8300/h8300.md (a peephole2): New.
+ * optabs.c (expand_abs): Set result_unsignedp to 1 if
+ flag_trav is zero.
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-07 Richard Henderson <rth@redhat.com>
- * config/h8300/h8300.md (*extzv_8_8): Use shorter code when
- operands[0] and operands[1] are different.
+ * c-cppbuiltin.c (c_cpp_builtins): Define __EXCEPTIONS for C also.
-2003-03-03 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-07 Richard Henderson <rth@redhat.com>
- * reload1.c (reload_cse_move2add): Remove variable success.
+ * basic-block.h (EDGE_SIBCALL): New.
+ (EDGE_ALL_FLAGS): Update.
+ * cfg.c (dump_edge_info): Add sibcall name.
+ * cfgbuild.c (make_edges): Use EDGE_SIBCALL.
+ * cfgrtl.c (purge_dead_edges): Handle sibcalls.
-2003-03-02 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+2003-06-07 Andreas Jaeger <aj@suse.de>
- * ggc-common.c (ggc_rlimit_bound): Cast RLIM_INFINITY to avoid
- warnings.
+ * mklibgcc.in (lib2funcs): Remove _exit.
+ * libgcc2.c: Remove L_exit.
+ * gbl-ctors.h: Remove declarations dependend on NEED_ATEXIT.
-2003-03-02 Richard Henderson <rth@redhat.com>
+ * system.h: Poison NEED_ATEXIT, ON_EXIT, EXIT_BODY.
- * configure.in (HAVE_AS_LTOFFX_LDXMOV_RELOCS): New ia64 test.
- * config.in, configure: Rebuild.
- * config/ia64/ia64.c (ia64_ld_address_bypass_p): Accept lo_sum.
- * config/ia64/ia64.md (load_symptr): Use high/lo_sum for the
- paired ldtoffx and ldxmov annotations.
- (load_symptr_internal1): Remove.
- (load_symptr_high, load_symptr_low): New.
+ * doc/tm.texi (Misc): Remove NEED_ATEXIT, ON_EXIT, EXIT_BODY.
-2003-03-02 Neil Booth <neil@daikokuya.co.uk>
+ * ggc.h: Convert to ISO C90 prototypes.
+ * ggc-none.c: Likewise.
+ * ggc-common.c: Likewise.
+ * ggc-page.c: Likewise.
+ * ggc-simple.c: Likewise.
- * c-incpath.c (add_path): Fix sysp assignment.
+ * crtstuff.c: Remove undefined usage of INIT_SECTION_PREAMBLE.
-2003-03-02 Kurt Garloff <garloff@suse.de>
+ * system.h: Poison INIT_SECTION_PREAMBLE.
- * params.def: Introduce parameter max-inline-insns-rtl for
- a separate limit for the RTL inliner.
- * params.h: Likewise.
- * integrate.c (function_cannot_inline_p): Use it.
- * toplev.c (decode_f_option): Set multiple parameters
- controlling inlining with -finline-limit.
- * params.def: Fix orthographic and typographic errors.
- * doc/invoke.texi: Document parameters controlling inlining
- and the way -finline-limit sets multiple of them.
+2003-06-07 Zack Weinberg <zack@codesourcery.com>
- * tree.h (struct tree_decl): Introduce inlined_function_flag,
- recording whether the function became eligible for inlining
- by a compiler flag rather than the declaration.
- Provide DID_INLINE_FUNC macro to access it.
- * c-decl.c (grokdeclarator): Set DID_INLINE_FUNC.
- * cp/decl.c (grokfndecl): Likewise.
- * toplev.c (rest_of_compilation): Likewise.
- * cp/optimize (maybe_clone_body): Copy DID_INLINE_FUNC.
- * print-tree.c (print_node): Report it.
- * params.def: Introduce new max-inline-insns-auto limit.
- * params.h: Likewise.
- * tree-inline.c (inlinable_function_p): Apply it to functions
- with DID_INLINE_FUNC set.
- * toplev.c (decode_f_option): Initialize it from -finline-limit
- value.
- * doc/invoke.texi: Document new parameter.
+ * config.gcc (with_cpu handling): Translate sparc64 in
+ $machine to --with-cpu=v9.
+ * config/alpha/alpha.c
+ (TARGET_ASM_GLOBALIZE_LABEL [TARGET_ABI_UNICOSMK]): Correct definition.
+ (alpha_setup_incoming_varargs): #ifdef out when TARGET_ABI_UNICOSMK.
+
+ * target.h: New hook asm_out.file_end.
+ * target.h: Update to match. New hook macro TARGET_ASM_FILE_END.
+ * toplev.c (compile_file: Use targetm.asm_out.file_end.
+ * system.h: Poison ASM_FILE_END.
+ * varasm.c (file_end_indicate_exec_stack): New.
+ * output.h: Prototype it.
+ * doc/tm.texi: Document TARGET_ASM_FILE_END and
+ file_end_indicate_exec_stack. Delete references to attasm.h.
+
+ * config/darwin.h (TARGET_ASM_FILE_END): Reset to darwin_file_end.
+ (ASM_FILE_END): Delete; move code...
+ * config/darwin.c (darwin_file_end): Here; new function.
+ * config/darwin-protos.h: Prototype it.
+ * config/alpha/alpha.c (unicosmk_asm_file_end): Make static,
+ rename unicosmk_file_end.
+ * config/arm/aof.h (ASM_FILE_END): Delete; move code...
+ * config/arm/arm.c (aof_file_end): ... here; new static function.
+ Set TARGET_ASM_FILE_END to aof_file_end if AOF_ASSEMBLER.
+ Make aof_dump_imports and aof_dump_pic_table static.
+ * config/avr/avr.c (asm_file_end): Rename avr_file_end, make static.
+ Set TARGET_ASM_FILE_END to avr_file_end.
+ * config/c4x/c4x.c (c4x_file_end): Make static. Take no arguments.
+ Set TARGET_ASM_FILE_END to c4x_file_end.
+ * config/h8300/h8300.c (asm_file_end): Rename h8300_file_end,
+ make static. Take no arguments. Set TARGET_ASM_FILE_END to
+ h8300_file_end.
+ * config/i370/i370.h (ASM_FILE_END): Delete; move code...
+ * config/i370/i370.c (i370_file_end): ... here; new static function.
+ Set TARGET_ASM_FILE_END to i370_file_end.
+ * config/i386/i386.c (ix86_asm_file_end): Rename ix86_file_end.
+ Take no arguments. Call file_end_indicate_exec_stack if
+ NEED_INDICATE_EXEC_STACK; don't use SUBTARGET_FILE_END.
+ * config/i386/i386.h: Set TARGET_ASM_FILE_END, not ASM_FILE_END.
+ Define NEED_INDICATE_EXEC_STACK to 0.
+ * config/i386/linux.h, config/i386/linux64.h: Redefine
+ NEED_INDICATE_EXEC_STACK to 1 instead of setting SUBTARGET_FILE_END.
+ * config/i386/winnt.c (i386_pe_asm_file_end): Rename to
+ i386_pe_file_end. Take no arguments. Use ix86_file_end.
+ * config/ia64/ia64.c (ia64_hpux_asm_file_end): Rename to
+ ia64_hpux_file_end, make static. Take no arguments.
+ * config/ip2k/ip2k.c (asm_file_start, asm_file_end,
+ commands_in_prologues, commands_in_epilogues): Delete.
+ (function_epilogue): Update to match.
+ * config/mips/mips.c (mips_asm_file_end): Rename mips_file_end,
+ make static. Take no arguments.
+ (iris6_asm_file_end): Rename iris6_file_end, make static, use
+ mips_file_end, take no arguments.
+ Set TARGET_ASM_FILE_END to iris6_file_end or mips_file_end as
+ appropriate.
+ * config/mmix/mmix.c (mmix_asm_file_end): Rename mmix_file_end,
+ make static, take no arguments. Set TARGET_ASM_FILE_END to
+ mmix_file_end.
+ * config/pa/pa.c (output_deferred_plabels): Make static, take
+ no arguments. Set TARGET_ASM_FILE_END to output_deferred_plabels.
+ * config/rs6000/xcoff.h (TARGET_ASM_FILE_END): Set it.
+ (ASM_FILE_END): Delete; move code...
+ * config/rs6000/rs6000.c (rs6000_xcoff_file_end): ... here;
+ new static function.
+
+ * config/avr/avr.h, config/cris/cris.h, config/h8300/h8300.h
+ * config/mmix/mmix.h, config/mips/iris6.h, config/mips/mips.h:
+ Don't set ASM_FILE_END.
+ * config/alpha/linux-elf.h, config/m68k/linux.h, config/rs6000/linux.h
+ * config/rs6000/linux64.h, config/s390/linux.h, config/sparc/linux.h
+ * config/sparc/linux64.h: Set TARGET_ASM_FILE_END to
+ file_end_indicate_exec_stack; don't set ASM_FILE_END.
+ * config/alpha/unicosmk.h, config/i386/cygming.h
+ * config/ia64/hpux.h: Set TARGET_ASM_FILE_END, not ASM_FILE_END.
+ * config/arm/arm-protos.h, config/alpha/alpha-protos.h
+ * config/avr/avr-protos.h, config/c4x/c4x-protos.h
+ * config/h8300/h8300-protos.h, config/ia64/ia64-protos.h
+ * config/ip2k/ip2k-protos.h, config/mips/mips-protos.h
+ * config/mmix/mmix-protos.h, config/pa/pa-protos.h: Update.
+
+Sat Jun 7 18:32:13 CEST 2003 Jan Hubicka <jh@suse.cz>
+
+ * i386.h (OPTION_DEFAULT_SPECS): Avoid -mcpu default when -march is
+ specified.
+
+Sat Jun 7 15:20:01 CEST 2003 Jan Hubicka <jh@suse.cz>
-2003-03-02 Geoffrey Keating <geoffk@apple.com>
+ * Makefile.in (stageprofile_build): Kill redundant target.
+ * i386.c (mdep_reorg): Don't pad jumps for Athlon.
- * fix-header.c (read_scan_file): Don't reference simplify_path.
+2003-06-07 Andreas Jaeger <aj@suse.de>
-2003-03-02 Stephane Carrez <stcarrez@nerim.fr>
+ * doc/tm.texi (Costs): Remove DONT_REDUCE_ADDR documentation.
- * config/m68hc11/m68hc11.c (m68hc11_override_options): Don't enable
- min/max instructions by default as may result in reload errors.
+ * config/avr/avr.h: Remove comment regarding DONT_REDUCE_ADDR.
+ * config/dsp16xx/dsp16xx.h: Likewise.
+ * config/i386/i386.h: Likewise.
+ * config/ip2k/ip2k.h: Likewise.
-2003-03-02 Stephane Carrez <stcarrez@nerim.fr>
+2003-06-07 Neil Booth <neil@daikokuya.co.uk>
- * config/m68hc11/m68hc11.md ("mulqi3"): Allow address register to
- avoid reload problems; define split for it.
+ * Makefile.in (OJBS, c-opts.o): Update.
+ (c-options.c, c-options.h): Rename options.h and options.c.
+ (options.h): Rename options_.h.
+ (opts.o): New.
+ * c-common.h (c_common_handle_option): Replace c_common_decode_option.
+ (c_common_init_options): Update prototype.
+ * c-lang.c (c_init_options): Update prototype.
+ (LANG_HOOKS_HANDLE_OPTION): Override.
+ (LANG_HOOKS_DECODE_OPTION): Drop.
+ * c-opts.c: Include opts.h and options.h instead of c-options.h
+ and c-options.c.
+ (lang_flags): Move to file scope.
+ (find_opt, c_common_decode_option): Remove.
+ (CL_C, CL_OBJC, CL_CXX, CL_OBJCXX, CL_JOINED, CL_SEPARATE,
+ CL_REJECT_NEGATIVE): Move to opts.h.
+ (missing_arg): Update prototype.
+ (c_common_init_options): Update for new prototype.
+ (c_common_handle_options): Filenames are passed as N_OPTS.
+ * hooks.c (hook_int_void_0): New.
+ * hooks.h (hook_int_void_0): New.
+ * langhooks-def.h (LANG_HOOKS_INIT_OPTIONS): New default.
+ (LANG_HOOKS_HANDLE_OPTION): Default to NULL for now.
+ (LANG_HOOKS_INITIALIZER): Update.
+ * langhooks.h (init_options): Update.
+ (handle_option): New.
+ * opts.c, opts.h: New files.
+ * opts.sh: Update c file to include opts.h and options.h.
+ * toplev.c: Include opts.h; change options.h to options_.h.
+ (parse_options_and_default_flags): Get lang_mask, use
+ handle_option for language-specific handling.
+ * objc/objc-lang.c (LANG_HOOKS_DECODE_OPTON): Drop.
+ (LANG_HOOKS_HANDLE_OPTION): Override.
+ (objc_init_options): Update.
+
+2003-06-07 Magnus Kreth <magnus.kreth@gmx.de>
+ Thibaud Gaillard <thibaud.gaillard@nto.atmel.com>
+
+ PR other/7031
+ * Makefile.in (install-common): Remove GCOV_INSTALL_NAME instead of
+ gcov.
-2003-03-02 Stephane Carrez <stcarrez@nerim.fr>
+2003-06-07 Kelley Cook <kelleycook@wideopenwest.com>
- * config/m68hc11/m68hc11.c (m68hc11_shift_operator): New function.
- * config/m68hc11/m68hc11-protos.h (m68hc11_shift_operator): Declare.
- * config/m68hc11/m68hc11.h (PREDICATE_CODES): Register.
- * config/m68hc11/m68hc11.md ("rotrhi3", "rotlhi3"): New patterns for
- rotatert and rotate.
- ("rotrhi3_const", "rotlhi3_const"): Rename of old 'rotrhi3' insns.
- ("*rotrhi3", "*rotlhi3"): New insn pattern for non-const rotatert.
- ("*rotrhi3_addr"): New split for shift insns on address register.
- ("*lshrhi3", "*ashrhi3", "*ashlhi3_2"): Use new split.
- * config/m68hc11/larith.asm (___rotlhi3): New asm function.
- (___rotrhi3): Likewise.
- * config/m68hc11/t-m68hc11-gas (LIB1ASMFUNCS): Build them.
+ * configure.in (HAVE_LD_RO_RW_SECTION_MIXING): Remove quotes in
+ section names.
+ * configure: Regenerate.
-2003-03-02 Neil Booth <neil@daikokuya.co.uk>
+2003-06-07 Alan Modra <amodra@bigpond.net.au>
- * toplev.c (aux_base_name): Moved from toplev.h.
- (filename): Constify.
- (lang_dependent_init): Don't duplicate name.
- (process_options): Set aux_base_name here, not...
- (do_compile): ...here. Change protoype.
- (toplev_main): Move some code from do_compile.
- * toplev.h: Remove aux_base_name.
+ * config/rs6000/linux64.h (CRT_CALL_STATIC_FUNCTION): Define.
-2003-03-02 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-06 James E Wilson <wilson@tuliptree.org>
- * config/h8300/h8300-protos.h: Add a prototype for
- iorxor_operator.
- * config/h8300/h8300.c (print_operand): Handle 'c'.
- (iorxor_operator): New.
- * config/h8300/h8300.h (PREDICATE_CODES): Add iorxor_operator.
- * config/h8300/h8300.md (*iorhi3_zext): Remove.
- (*iorsi3_zexthi): Likewise.
- (*iorsi3_zextsi): Likewise.
- (*xorhi3_zextqi): Likewise.
- (*xorsi3_zexthi): Likewise.
- (*xorsi3_zextsi): Likewise.
- (*ixorhi3_zext): New.
- (*ixorsi3_zext_qi): Likewise.
- (*ixorsi3_zext_hi): Likewise.
+ PR inline-asm/10890
+ * reload1.c (merge_assigned_reloads): Abort only if two reloads have
+ different in fields.
-2003-03-02 Neil Booth <neil@daikokuya.co.uk>
+2003-06-06 Nathanael Nerode <neroden@gcc.gnu.org>
- * c-incpath.c (remove_component_p, simplify_path): Move back to
- cppfiles.c.
- (remove_duplicates): Use cpp_simplify_path.
- * c-incpath.h (simplify_path): Remove.
- * c-lex.c: Don't include c-incpath.h.
- (init_c_lex): Remove simplify_path.
- * cppfiles.c (remove_component_p, cpp_simplify_path): Restore.
- (find_or_create_entry, validate_pch): Revert.
+ * configure.in: Make $(target_subdir) correspond with top level usage.
+ * Makefile.in: Likewise.
+ * configure: Regenerate.
-2003-03-02 Ashif Harji <asharji@uwaterloo.ca>
+2003-06-06 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
- * gcc.c (default_compilers): Add -no-integrated-cpp flag to invoke
- an external cpp during compilation.
- (option_map): Likewise.
- * objc/lang-specs.h (default_compilers): Similarly.
- * doc/invoke.texi: Document -no-integrated-cpp flag.
+ * pa.h (ASM_OUTPUT_SKIP, ASM_OUTPUT_ALIGNED_COMMON,
+ ASM_OUTPUT_ALIGNED_LOCAL): Cast `SIZE' and `ALIGNED' parameters to
+ unsigned HOST_WIDE_INT.
+ * pa-pro-end.h (ASM_OUTPUT_ALIGNED_COMMOM, ASM_OUTPUT_ALIGNED_LOCAL):
+ Likewise.
+ * pa64-hpux.h (ASM_OUTPUT_ALIGNED_COMMON, ASM_OUTPUT_ALIGNED_LOCAL):
+ Likewise.
-2003-03-02 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-06 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
- * config/h8300/h8300.md (zero_extendqisi2): Change to an
- expander.
- (*zero_extendqisi2_h8300): New.
- (*zero_extendqisi2_h8300hs): New.
- (two splitters): New.
+ * doc/install.texi (Prerequisites): New section documenting
+ tools and packages necessary prior to building and/or
+ modifying GCC.
+ * doc/install.texi2html: Also generate prerequisites.html.
-2003-03-02 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+2003-06-06 Richard Earnshaw <rearnsha@arm.com>
- * fp-bit.h (float_to_usi): Fix condition wrapping prototype.
+ PR target/11052
+ * ifcvt.c (noce_process_if_block): Fail if the destination has
+ side-effects.
-2003-03-01 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-06 Jason Merrill <jason@redhat.com>
- * config/h8300/h8300.md (a peephole2): Remove dead code.
+ * stmt.c (resolve_asm_operand_names): Rename from
+ resolve_operand_names. No longer static. Avoid needless copying.
+ Don't build array of constraints.
+ (expand_asm_operands): Build it here.
+ * tree.h: Declare resolve_asm_operand_names.
-2003-03-01 Roger Sayle <roger@eyesopen.com>
+ * stmt.c (expand_decl): Put artificial vars into registers even
+ when not optimizing, and don't mark the regs as user vars.
- PR c++/9367
- * builtin-types.def (DEF_FUNCTION_TYPE_VAR_3): New macro.
- (BT_FN_INT_CONST_STRING_VALIST_ARG,
- BT_FN_INT_STRING_CONST_STRING_VALIST_ARG,
- BT_FN_INT_CONST_STRING_CONST_STRING_VALIST_ARG,
- BT_FN_INT_STRING_SIZE_CONST_STRING_VALIST_ARG,
- BT_FN_INT_STRING_CONST_STRING_VAR,
- BT_FN_INT_CONST_STRING_CONST_STRING_VAR,
- BT_FN_INT_STRING_SIZE_CONST_STRING_VAR): New built-in types.
- * builtin-attrs.def (ATTR_NONNULL_1, ATTR_NONNULL_2,
- ATTR_NONNULL_3): Also include the nothrow attribute.
- (sprintf, scanf, sscanf, vprintf, vsprintf, snprintf,
- vsnprintf, vscanf, vsscanf): Don't define attributes here.
- * builtins.def (putchar, puts): Make full C89 built-ins.
- (snprintf, sprintf, scanf, sscanf, vprintf, vscanf,
- vsscanf, vsnprintf, vsprintf): New built-ins.
- * c-common.c (c_common_nodes_and_builtins): Handle new macro
- DEF_FUNCTION_TYPE_VAR_3.
+2003-06-06 J"orn Rennecke <joern.rennecke@superh.com>
- * doc/extend.texi: Document these new built-in functions.
+ * sh.h (FUNCTION_ARG_1): Consistently use NEW_MODE for the mode
+ of the generated register.
-2003-03-01 Kazu Hirata <kazu@cs.umass.edu>
+2003-06-06 Daniel Jacobowitz <drow@mvista.com>
- * config/h8300/h8300.md (a peephole2): New.
+ * config.gcc: Add a missing sparc64 case.
-2003-03-01 Richard Earnshaw <rearnsha@arm.com>
+2003-06-06 Jakub Jelinek <jakub@redhat.com>
- * predict.c (estimate_bb_frequencies): Correctly set
- real_values_initialized after initialization.
+ * mklibgcc.in: Propagate .note.GNU-stack section if needed into
+ the .hidden assembly stubs.
-2003-03-01 Neil Booth <neil@daikokuya.co.uk>
+2003-06-06 H.J. Lu <hongjiu.lu@intel.com>
- * Makefile.in (C_AND_OBJC_OBJS, c-incpath.o, c-lex.o, LIBCPP_OBJS,
- cppinit.o, cppdefault.o, fix-header): Update.
- * c-incpath.c: New file.
- * c-incpath.h: New file.
- * c-lex.c: Include c-incpath.h.
- (init_c_lex): Register path simplifier.
- * c-opts.c: Include cppdefault.h and c-incpath.h.
- (TARGET_SYSTEM_ROOT, verbose, iprefix, sysroot, std_inc,
- std_cxx_inc, quote_chain_split, add_prefixed_path): New.
- (COMMAND_LINE_OPTIONS): Add more options from cpplib.
- (missing_arg, c_common_decode_option): Handle them.
- (c_common_post_options): Register include chains.
- (print_help): Update.
- * cppdefault.h (struct default include): Update.
- Move some macros to ...
- * cppdefault.c: ... here.
- (cpp_include_defaults): Add extra field add_sysroot.
- * cppfiles.c (include_file, search_from, find_or_create_entry,
- cpp_included, find_include_file, remap_filename): Update for
- renaming of search_path to cpp_path, and of the chain headers.
- (remove_component_p, _cpp_simplify_pathname): Move to c-incpath.c.
- * cpphash.h (struct search_path): Move to cpplib.h.
- (struct cpp_buffer, struct cpp_reader): Update.
- (_cpp_simplify_pathname): Remove.
- * cppinit.c: Don't include prefix.h and cppdefault.h.
- (INO_T_EQ, INO_T_COPY, path_include, append_include_chain,
- remove_dup_dir, remove_dup_nonsys_dirs, remove_dup_dirs,
- init_standard_includes, BRACKET, SYSTEM, AFTER, no_dir,
- no_pth, cpp_handle_options): Remove.
- (struct pending_option): Remove chain members.
- (cpp_destroy, cpp_read_main_file, COMMAND_LINE_OPTIONS,
- cpp_handle_option): Update.
- * cpplib.h (struct cpp_path, cpp_set_include_chains): New.
- (struct cpp_options): Remove quote_include, bracket_include,
- include_prefix, include_prefix_len, verbose, ignore_srcdir,
- no_standard_includes, no_standard_cplusplus_includes.
- (struct cpp_callbacks): Add simplify_path.
- (cpp_handle_options): Remove.
- * fix-header.c: Include c-incpath.h.
- (read_scan_file): Update to use c-incpath functionality.
- * doc/passes.texi: Update.
+ * config.gcc (extra_headers): Add emmintrin.h for i[34567]86-*-*
+ and x86_64-*-*.
-2003-03-01 Kazu Hirata <kazu@cs.umass.edu>
+ * config/i386/mmintrin.h: Update version and add alternate
+ intrinsic names.
+ * config/i386/xmmintrin.h: Likewise.
- * config/h8300/h8300.c (bit_operand): Accept MEM only if it
- satisfies EXTRA_CONSTRAINT 'U'.
+ * config/i386/xmmintrin.h: Include <emmintrin.h>. Move SSE2
+ intrinsics to ...
+ * config/i386/emmintrin.h: Here. New file.
+
+2003-06-06 Roger Sayle <roger@eyesopen.com>
+
+ * fold-const.c (fold <ABS_EXPR>): Re-fold the result of folding
+ fabs(-x) into fabs(x). Use tree_expr_nonnegative_p to determine
+ when the ABS_EXPR (fabs or abs) is not required.
+ (tree_expr_nonnegative_p): Move the logic that sqrt and exp are
+ always nonnegative from fold to here. Additionally, cabs and fabs
+ are always non-negative, and pow and atan are non-negative if
+ their first argument is non-negative.
+
+ * builtins.c (fold_builtin_cabs): New function to fold cabs{,f,l}.
+ Evaluate cabs of a constant at compile-time. Convert cabs of a
+ non-complex argument into fabs. Convert cabs(z) into
+ sqrt(z.r*z.r + z.i*z.i) at the tree-level with -ffast-math or
+ -funsafe-math-optimizations or -ffast-math.
+ (fold_builtin): Convert BUILT_IN_FABS{,F,L} into an ABS_EXPR.
+ Fold BUILT_IN_CABS{,F,L} using fold_builtin_cabs.
+
+Thu Jun 5 20:51:09 CEST 2003 Jan Hubicka <jh@suse.cz>
+
+ * sourcebuild.texi (Front End Directory): Document new hooks.
+
+Fri Jun 6 11:02:35 CEST 2003 Jan Hubicka <jh@suse.cz>
+
+ * function.c (FLOOR_ROUND, CEIL_ROUND): Fix.
+ * i386.md (gen_pro_epilogue_adjust_stack): Deal with gigantic
+ stack frames.
+ (pro_epilogue_adjust_stack_rex64_2): New pattern
**** TRUNCATED ****
-------------- next part --------------
--
Geoffrey Keating <geoffk@apple.com>
(via an automated GCC regression-testing script.)
More information about the Gcc-regression
mailing list