3 GCC regressions, 0 new, with your patch on 2003-07-01T10:25:36Z.

GCC regression checker geoffk@apple.com
Tue Jul 1 16:11:00 GMT 2003


With your recent patch, GCC has some regression test failures, which
used to pass.  There are 0 new failures, and 3
failures that existed before and after that patch; 132 failures
have been fixed.

The old failures, which were not fixed or introduced by your patch, are:
native g77.sum g77.f-torture/execute/980520-1.f
native gcc.sum gcc.c-torture/execute/20000412-3.c
native gcc.sum gcc.dg/warn-1.c

The fixed failures are:
native g++.sum g++.dg/abi/bitfield1.C
native g++.sum g++.dg/abi/bitfield2.C
native g++.sum g++.dg/abi/bitfield4.C
native g++.sum g++.dg/abi/empty4.C
native g++.sum g++.dg/abi/empty8.C
native g++.sum g++.dg/abi/enum1.C
native g++.sum g++.dg/abi/layout1.C
native g++.sum g++.dg/abi/layout2.C
native g++.sum g++.dg/abi/mangle2.C
native g++.sum g++.dg/abi/offsetof.C
native g++.sum g++.dg/abi/param1.C
native g++.sum g++.dg/abi/rtti2.C
native g++.sum g++.dg/abi/vbase12.C
native g++.sum g++.dg/abi/vthunk1.C
native g++.sum g++.dg/bprob/g++-bprob-1.C
native g++.sum g++.dg/compat/abi/bitfield1
native g++.sum g++.dg/compat/abi/bitfield2
native g++.sum g++.dg/compat/break/bitfield5
native g++.sum g++.dg/compat/break/empty6
native g++.sum g++.dg/compat/break/vbase10
native g++.sum g++.dg/compat/break/vbase11
native g++.sum g++.dg/compat/eh/ctor1
native g++.sum g++.dg/compat/eh/ctor2
native g++.sum g++.dg/compat/eh/dtor1
native g++.sum g++.dg/compat/eh/filter1
native g++.sum g++.dg/compat/eh/filter2
native g++.sum g++.dg/compat/eh/new1
native g++.sum g++.dg/compat/eh/nrv1
native g++.sum g++.dg/compat/eh/spec3
native g++.sum g++.dg/compat/eh/template1
native g++.sum g++.dg/compat/eh/unexpected1
native g++.sum g++.dg/compat/init/array5
native g++.sum g++.dg/compat/init/byval1
native g++.sum g++.dg/compat/init/dtor1
native g++.sum g++.dg/compat/init/elide1
native g++.sum g++.dg/compat/init/init-ref2
native g++.sum g++.dg/debug/const1.C
native g++.sum g++.dg/debug/debug4.C
native g++.sum g++.dg/debug/trivial.C
native g++.sum g++.dg/eh/ctor1.C
native g++.sum g++.dg/eh/ctor2.C
native g++.sum g++.dg/eh/dtor1.C
native g++.sum g++.dg/eh/filter1.C
native g++.sum g++.dg/eh/filter2.C
native g++.sum g++.dg/eh/loop1.C
native g++.sum g++.dg/eh/loop2.C
native g++.sum g++.dg/eh/new1.C
native g++.sum g++.dg/eh/omit-frame-pointer.C
native g++.sum g++.dg/eh/omit-frame-pointer2.C
native g++.sum g++.dg/eh/registers1.C
native g++.sum g++.dg/eh/spec3.C
native g++.sum g++.dg/eh/template1.C
native g++.sum g++.dg/eh/unexpected1.C
native g++.sum g++.dg/expr/cond1.C
native g++.sum g++.dg/ext/alignof1.C
native g++.sum g++.dg/ext/attrib3.C
native g++.sum g++.dg/ext/attrib6.C
native g++.sum g++.dg/ext/oper1.C
native g++.sum g++.dg/gcov/gcov-1.C
native g++.sum g++.dg/gcov/gcov-2.C
native g++.sum g++.dg/gcov/gcov-3.C
native g++.sum g++.dg/inherit/covariant1.C
native g++.sum g++.dg/inherit/covariant2.C
native g++.sum g++.dg/inherit/covariant3.C
native g++.sum g++.dg/inherit/covariant4.C
native g++.sum g++.dg/inherit/null1.C
native g++.sum g++.dg/inherit/operator1.C
native g++.sum g++.dg/inherit/using1.C
native g++.sum g++.dg/inherit/using2.C
native g++.sum g++.dg/init/array1.C
native g++.sum g++.dg/init/array5.C
native g++.sum g++.dg/init/byval1.C
native g++.sum g++.dg/init/copy3.C
native g++.sum g++.dg/init/ctor1.C
native g++.sum g++.dg/init/dtor1.C
native g++.sum g++.dg/init/dtor2.C
native g++.sum g++.dg/init/elide1.C
native g++.sum g++.dg/init/elide2.C
native g++.sum g++.dg/init/elide3.C
native g++.sum g++.dg/init/empty1.C
native g++.sum g++.dg/init/init-ref1.C
native g++.sum g++.dg/init/init-ref2.C
native g++.sum g++.dg/init/init-ref3.C
native g++.sum g++.dg/init/pm1.C
native g++.sum g++.dg/lookup/anon1.C
native g++.sum g++.dg/lookup/template1.C
native g++.sum g++.dg/lookup/two-stage1.C
native g++.sum g++.dg/opt/alias1.C
native g++.sum g++.dg/opt/alias2.C
native g++.sum g++.dg/opt/cleanup1.C
native g++.sum g++.dg/opt/const1.C
native g++.sum g++.dg/opt/const2.C
native g++.sum g++.dg/opt/dtor1.C
native g++.sum g++.dg/opt/inline2.C
native g++.sum g++.dg/opt/longbranch1.C
native g++.sum g++.dg/opt/nrv1.C
native g++.sum g++.dg/opt/nrv2.C
native g++.sum g++.dg/opt/nrv3.C
native g++.sum g++.dg/opt/nrv4.C
native g++.sum g++.dg/opt/nrv5.C
native g++.sum g++.dg/opt/pr6713.C
native g++.sum g++.dg/opt/preinc1.C
native g++.sum g++.dg/opt/ptrintsum1.C
native g++.sum g++.dg/opt/reg-stack.C
native g++.sum g++.dg/opt/thunk1.C
native g++.sum g++.dg/other/copy1.C
native g++.sum g++.dg/other/copy2.C
native g++.sum g++.dg/other/init2.C
native g++.sum g++.dg/other/packed1.C
native g++.sum g++.dg/other/ptrmem1.C
native g++.sum g++.dg/other/ptrmem3.C
native g++.sum g++.dg/other/stdarg1.C
native g++.sum g++.dg/overload/member2.C
native g++.sum g++.dg/rtti/cv1.C
native g++.sum g++.dg/special/conpr-1.C
native g++.sum g++.dg/special/conpr-2.C
native g++.sum g++.dg/special/initp1.C
native g++.sum g++.dg/template/conv2.C
native g++.sum g++.dg/template/conv3.C
native g++.sum g++.dg/template/ctor2.C
native g++.sum g++.dg/template/deduce1.C
native g++.sum g++.dg/template/friend.C
native g++.sum g++.dg/template/friend10.C
native g++.sum g++.dg/template/partial1.C
native g++.sum g++.dg/template/pretty1.C
native g++.sum g++.dg/template/qual2.C
native g++.sum g++.dg/template/qualttp11.C
native g++.sum g++.dg/template/qualttp12.C
native g++.sum g++.dg/template/qualttp14.C
native g++.sum g++.dg/template/qualttp16.C
native g++.sum g++.dg/template/union1.C
native g++.sum g++.dg/template/vtable1.C

For more information, see http://gcc.gnu.org/regtest/.
-------------- next part --------------
ChangeLog entries since last run on 2003-07-01T05:03:50Z:
--- /Users/regress/tbox/changelog_mail/gcc/gcc/ChangeLog	Mon Jun 30 22:04:32 2003
+++ gcc/gcc/ChangeLog	Tue Jul  1 03:26:19 2003
@@ -1,3 +1,39 @@
+2003-07-01  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* rtl.h (emit_line_note_after): Remove.
+	(emit_note_copy_after, emit_note_copy): New.
+	* emit-rtl.c (reorder_insns_with_line_notes): Replace
+	emit_line_note_after with emit_note_copy_after.
+	(emit_insn_after_with_line_notes): Likewise.
+	(emit_line_note_after): Kill.
+	(emit_note_copy_after): New.
+	(emit_note_copy): New.
+	* function.c (emit_return_into_block): Use emit_note_copy_after.
+	(thread_prologue_and_epilogue_insns): Likewise.
+	* integrate.c (expand_inline_function): Use emit_note_copy.
+	(copy_insn_list): Likewise.
+	* unroll.c (copy_loop_body): Likewise.
+	* cfglayout.c (duplicate_insn_chain): Likewise.
+
+2003-07-01  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* c-tree.h (define_label): Replace filename and lineno arguments
+	with a location_t.
+	* c-decl.c (poplevel): Adjust define_label call.
+	(pop_label_level): Likewise.
+	(define_label): Replace filename and lineno arguments with a
+	location_t.
+	(store_parm_decls): Use DECL_SOURCE_LOCATION.
+	* c-parse.in (label): Adjust define_label call.
+
+2003-07-01  Neil Booth  <neil@daikokuya.co.uk>
+
+	* config/sol2.h, config/alpha/alpha.h, config/alpha/linux.h,
+	config/i386/i386-interix.h, config/ia64/hpux.h, config/mips/iris6.h,
+	config/mips/linux.h, config/mips/mips.h, config/pa/pa-hpux.h,
+	config/pa/pa-hpux10.h, config/pa/pa-hpux11.h, config/pa/pa-pro-end.h,
+	config/pa/pa.h, config/pa/rtems.h: Use c_dialect_ macros.
+
 2003-07-01  Andreas Jaeger  <aj@suse.de>
 
 	* final.c: Convert prototypes to ISO C90.
--- /Users/regress/tbox/changelog_mail/gcc/gcc/cp/ChangeLog	Mon Jun 30 16:42:09 2003
+++ gcc/gcc/cp/ChangeLog	Tue Jul  1 03:26:26 2003
@@ -1,3 +1,18 @@
+2003-07-01  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* cp-tree.h (define_label): Replace filename and lineno
+	arguments with a location_t.
+	* decl.c (pop_label): Adjust define_label call.
+	(define_label): Replace filename and lineno arguments with a
+	location_t.
+	* semantics.c (finish_label): Adjust define_label call.
+
+2003-07-01  Mark Mitchell  <mark@codesourcery.com>
+
+	PR c++/9559
+	* decl2.c (grokfield): Do not build NOP_EXPRs around the
+	error_mark_node.
+
 2003-06-30  Neil Booth  <neil@daikokuya.co.uk>
 
 	* Make-lang.in: Update.
--- /Users/regress/tbox/changelog_mail/gcc/gcc/java/ChangeLog	Fri Jun 27 21:58:40 2003
+++ gcc/gcc/java/ChangeLog	Tue Jul  1 03:26:30 2003
@@ -1,3 +1,7 @@
+2003-07-01  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* decl.c (poplevel): Adjust define_label call.
+
 2003-06-27  Zack Weinberg  <zack@codesourcery.com>
 
 	* gjavah.c (flag_jni): Make non-static.
--- /Users/regress/tbox/changelog_mail/gcc/gcc/testsuite/ChangeLog	Mon Jun 30 16:42:16 2003
+++ gcc/gcc/testsuite/ChangeLog	Tue Jul  1 03:26:31 2003
@@ -1,3 +1,8 @@
+2003-07-01  Mark Mitchell  <mark@codesourcery.com>
+
+	PR c++/9559
+	* g++.dg/init/static1.C: New test.
+
 2003-06-30  Volker Reichelt  <reichelt@igpm.rwth-aachen.de>
 
 	* Changelog: Remove ">>>>>>>" from previous change.
--- /Users/regress/tbox/changelog_mail/gcc/libstdc++-v3/ChangeLog	Mon Jun 30 22:04:51 2003
+++ gcc/libstdc++-v3/ChangeLog	Tue Jul  1 03:26:38 2003
@@ -1,3 +1,13 @@
+2003-07-01  Jerry Quinn  <jlquinn@optonline.net>
+
+	* 22_locale/num_put/put/char/7.cc: New.
+	* 22_locale/num_put/put/wchar_t/7.cc: New.
+
+2003-06-30  Jerry Quinn  <jlquinn@optonline.net>
+
+	* src/locale.cc (__use_cache<numpunct>): Revert previous relocation.
+	* include/bits/locale_facets.tcc (__use_cache<numpunct>): Ditto.
+
 2003-06-30  Benjamin Kosnik  <bkoz@redhat.com>
 
 	* 27_io/basic_filebuf/seekoff/char/1-in.cc: New.

ChangeLog entries between 2003-07-01T05:03:50Z and the last time everything
passed, on 2003-03-03T21:26:39Z:
--- /Users/regress/tbox/changelog_pass/gcc/ChangeLog	Mon Mar  3 13:26:59 2003
+++ gcc/ChangeLog	Fri Jun 27 12:19:37 2003
@@ -1,3 +1,348 @@
+2003-06-27  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* configure.in: Clean up config-lang.in handling.  Delete
+	useless assignment to "subdirs".
+	* configure: Regenerate.
+
+2003-06-26  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* configure.in: Rename 'target_libs' to 'target_libraries'.
+	Remove useless reference to 'target_libs'.
+	* configure: Regenerate.
+
+2003-06-23  Keith Seitz  <kseitz@sources.redhat.com>
+
+	* Makefile.tpl: Add maybe-configure-itcl to configure-gdb.
+	* Makefile.in: Regenerate.
+
+2003-06-23  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.def: Introduce flags_to_pass.
+	* Makefile.tpl: Generate BASE_FLAGS_TO_PASS using it.
+	* Makefile.in: Regenerate.
+
+2003-06-23  Hans-Peter Nilsson  <hp@bitrange.com>
+
+	* configure.in (noconfigdirs) <cris-*-*>: Disable target-newlib
+	and target-libgloss.
+	<d30v-*-*, fr30-*-*, i960-*-*, m32r-*-*>: Disable gdb.
+	<h8300*-*-*>: Disable libf2c and ${libgcj}.
+	* configure: Regenerate.
+
+2003-06-17  Benjamin Kosnik  <bkoz@redhat.com>
+
+	* configure.in: Update testsuite_flags to new location.
+	* configure. Regenerate.
+	
+2003-06-18  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.tpl: Remove BUILD_CC stuff.
+	* Makefile.in: Regenerate.
+
+2003-06-17  Kazu Hirata  <kazu@cs.umass.edu>
+
+	* MAINTAINERS (Write After Approval): Remove Andrew Haley.
+
+2003-06-16  Graeme Peterson <gp@qnx.com>
+
+	* MAINTAINERS (Write After Approval): Add myself.
+
+2003-06-14  H.J. Lu <hongjiu.lu@intel.com>
+ 
+	* config.guess: Update to 2003-06-12 version.
+	* config.sub: Update to 2003-06-13 version.
+
+2003-06-12  H.J. Lu <hongjiu.lu@intel.com>
+
+	* config.guess: Update to 2003-06-06 version.
+	* config.sub: Update to 2003-06-06 version.
+
+2003-06-11  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
+
+	* configure.in: Don't pass --with-stabs for mips*-sgi-irix6*o32.
+	* configure. Regenerate.
+
+2003-06-10  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* configure.in: Disable serial configure by default.
+	* configure: Regenerate.
+	* Makefile.tpl: Abolish .NOTPARALLEL.
+	* Makefile.in: Regenerate.
+
+	* Makefile.tpl: Replace {build,host,target}_canonical by
+	{build,host,target}.
+	* Makefile.in: Regenerate.
+
+	* Makefile.tpl: Fix stupid pasto.
+	* Makefile.in: Regenerate.
+
+2003-06-09  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.tpl: Remove bogus conditional.
+	* Makefile.in: Regenerate.
+
+2003-06-05  Jan Hubicka  <jh@suse.cz>
+
+	* Makefile.tpl (profiledbootstrap): New target.
+	* Makefile.in (profiledbootstrap): New target.
+
+2003-06-05  Wolfgang Bangerth  <bangerth@dealii.org>
+
+	* MAINTAINERS (Bugzilla only): Add Dara Hazeghi and Andrew
+	Pinski. Remove user names from other bugzilla-only maintainers.
+
+2003-06-03  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.tpl: Make 'recursive targets' using autogen rather
+	than shell loop.  Remove duplicate 'clean' targets and false
+	comments.
+	* Makefile.def: Add systematic dependencies to 'recursive' targets.
+	Add systematic method of specifying missing targets in subdirs.
+	Add copyright boilerplate.
+	* Makefile.in: Regenerate.
+	* configure.in: Add 'recursive targets' to maybe list.
+	* configure: Regenerate.
+
+	* MAINTAINERS: "GNATS only" -> "Bug database only".
+
+	* Makefile.tpl: Rename [+target+] to [+make_target+].
+	* Makefile.def: Rename 'target' to 'make_target'.
+
+2003-05-31  Neil Booth  <neil@daikokuya.co.uk>
+
+	* MAINTAINERS: Add self as options handling maintainer.
+
+2003-05-28  Michael Meissner  <gnu@the-meissners.org>
+
+	* MAINTAINERS: Remove myself as m32r/v850 maintainer, since it has
+	been too long since I touched those ports.
+
+2003-05-28  DJ Delorie  <dj@redhat.com>
+
+	* Makefile.tpl: Make maybe-check-gcc .PHONY.
+	* Makefile.in: Regenerate.
+
+2003-05-21  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
+
+	* configure.in: Use curly braces in the definition of tooldir.
+	* configure: Regenerate.
+
+2003-05-21  DJ Delorie  <dj@redhat.com>
+	
+	* Makefile.tpl (configure-target-libiberty): Depend only on gcc, not
+	newlib or libgloss.
+	* Makefile.in: Regenerate.
+
+2003-05-21  DJ Delorie  <dj@redhat.com>
+
+	* Makefile.tpl: Add missing empty maybe-check-gcc target.
+	* Makefile.in: Regenerate.
+
+2003-05-20  Ian Lance Taylor  <ian@airs.com>
+
+	* MAINTAINERS: Update my e-mail address.
+
+2003-05-19  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* configure.in: Switch more things to use maybe dependencies.
+	* Makefile.tpl: Switch more things to use maybe dependencies.  
+	Factor out common code from autogen IF statements.
+	* configure: Regenerate.
+	* Makefile.in: Regenerate.
+
+2003-05-14  Kelley Cook  <kelleycook@wideopenwest.com>
+
+	* configure.in: Accept i[3456789]86 for machine type.
+	* configure: Regenerate.
+
+2003-05-18  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* configure.in: Switch more things to use maybe dependencies.
+	Rearrange a little.  Use GCC_TOPLEV_SUBDIRS.
+	* configure: Regenerate.
+	* Makefile.tpl: Switch more things to use maybe dependencies.
+	* Makefile.in: Regenerate.
+
+2003-05-16  Andreas Schwab  <schwab@suse.de>
+
+	* Makefile.tpl (install-opcodes): Define.
+	* Makefile.in: Rebuild.
+
+2003-05-13  Andreas Jaeger  <aj@suse.de>
+
+	* config.guess: Update to 2003-05-09 version.
+	* config.sub: Update to 2003-05-09 version.
+
+2003-05-13  Michael Eager <eager@mvista.com>
+
+	* configure.in: Correct sed script so that options in quotes are not
+	deleted.
+	* configure: Rebuild.
+
+2003-05-12  Corinna Vinschen  <corinna@vinschen.de>
+
+	* configure.in (FLAGS_FOR_TARGET): Remove $$s/newlib/libc/sys/cygwin
+	and $$s/newlib/libc/sys/cygwin32 include paths.
+	* configure: Ditto.
+
+2003-05-12  Michael Meissner  <gnu@the-meissners.org>
+
+	* MAINTAINERS: Update my email addresses.
+
+2003-05-06  Eric Botcazou  <ebotcazou@libertysurf.fr>
+
+	* config-ml.in: Propagate INSTALL variables.
+
+2003-05-04  Gerald Pfeifer  <pfeifer@dbai.tuwien.ac.at>
+
+	* MAINTAINERS: Remove duplicate entries in Write After Approval.
+
+2003-05-02  Chris Demetriou  <cgd@broadcom.com>
+
+        * Makefile.tpl: Require "makeinfo" from texinfo 4.2 or later.
+        * Makefile.in: Regenerate.
+
+2003-05-02  Wolfgang Bangerth  <bangerth@dealii.org>
+
+	* MAINTAINERS (GNATS only): Add Falk Hueffner.
+
+2003-04-30  Wolfgang Bangerth  <bangerth@dealii.org>
+
+	* MAINTAINERS (GNATS only): Add Giovanni Bajo.
+
+2003-04-27  Daniel Jacobowitz  <drow@mvista.com>
+
+	* Makefile.tpl: Clean $(BUILD_SUBDIR).
+	* Makefile.in: Regenerated.
+
+2003-04-25  Wolfgang Bangerth  <bangerth@dealii.org>
+
+	* MAINTAINERS (Write After Approval): Upgrade myself from
+	GNATS only to write-after-approval. Update my mail address.
+
+2003-04-25  Loren J. Rittle <ljrittle@acm.org>
+
+	(OS Port Maintainers: freebsd): Add myself.
+
+2003-04-22  Mark Mitchell  <mark@codesourcery.com>
+
+	* MAINTAINERS (java): Remove Alexandre Petit-Bianco.
+
+2003-04-22  Kean Johnston  <jkj@sco.com>
+
+	* MAINTAINERS (SCO ports): Added myself.
+
+2003-04-21  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* MAINTAINERS (gcov): Add myself and Jan Hubicka.
+
+2003-04-19  Kean Johnston  <jkj@sco.com>
+
+	* MAINTAINERS (Write After Approval): Add myself.
+
+2003-04-18  Gerald Pfeifer  <pfeifer@dbai.tuwien.ac.at>
+
+	* Makefile.tpl (MAKEINFOFLAGS): Default to --split-size=5000000.
+	* Makefile.in: Regenerate.
+
+2003-04-18  Jakub Jelinek  <jakub@redhat.com>
+
+	* configure.in (powerpc64*-*-linux*): Remove.
+	* configure: Rebuilt.
+
+2003-04-17  Phil Edwards  <pme@gcc.gnu.org>
+
+	* Makefile.tpl (GCC_STRAP_TARGETS):  New variable containing all the
+	previous bootstrap targets, plus bubblestrap, quickstrap, cleanstrap,
+	and restrap.
+	* Makefile.in:  Regenerate.
+
+2003-04-16  Richard Earnshaw  <rearnsha@arm.com>
+
+	* configure.in (arm-*-netbsdelf*): Enable building java libraries.
+	* configure: Regenerated.
+
+2003-04-15  DJ Delorie  <dj@redhat.com>
+
+	* MAINTAINERS: Remove myself as windows/cygwin/mingw maintainer.
+
+2003-04-13  Nick Clifton  <nickc@redhat.com>
+
+	* config-ml.in: Remove support for --disable-aix removing
+	call-aix multilibs.
+
+2003-04-10  Alexandre Oliva  <aoliva@redhat.com>
+
+	* libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on mips*.
+	* */configure: Rebuilt.
+
+2003-04-08  Joel Sherrill  <joel@oarcorp.com>
+
+	* MAINTAINERS: Add my email address.
+
+2003-03-17  Olivier Hainque  <hainque@act-europe.fr>
+
+	* MAINTAINERS (Write After Approval): Add myself.
+
+2003-03-14  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES back down.
+	* Makefile.in: Regenerate.
+
+2003-03-14  Michael Chastain  <mec@shout.net>
+
+	* Makefile.in: Regenerate with correct Makefile.def.
+
+2003-03-12  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES up.  Delete unused
+	Make macro.
+	* Makefile.in: Regenerate.
+	* configure.in: Clean up gxx_include_dir logic.
+	* configure: Regenerate.
+
+2003-03-12  Ansgar Esztermann  <ansgar@thphy.uni-duesseldorf.de>
+
+	* MAINTAINERS (Write After Approval): Add myself.
+
+2003-03-10  Ben Elliston  <bje@wasabisystems.com>
+
+	* MAINTAINERS: Update my mail address.
+
+2003-03-09  Franz Sirl  <Franz.Sirl-kernel@lauterbach.com>
+
+	* configure.in (gxx_include_dir): Fix typo.
+	* configure: Regenerated.
+
+2003-03-04  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.tpl: Reindent.
+	* Makefile.in: Regenerate.
+	* configure.in: Reindent.  Don't set unused variables.
+	* configure: Regenerate.
+
+2003-03-04  Daniel Jacobowitz  <drow@mvista.com>
+
+	* configure.in: Include $(build_tooldir)/sys-include in
+	FLAGS_FOR_TARGET.
+	* configure: Regenerated.
+
+2003-03-04  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.tpl: Always pass down RANLIB.
+	* Makefile.in: Regenerate.
+
+	* Makefile.tpl: Don't set unused enable_shared, enable_threads macros.
+	* Makefile.in: Regenerate.
+	* configure.in: Remove unused logic relating to --enable-shared
+	and --enable-threads.  Remove bogus comments.  Remove redundant
+	noconfigdirs.
+	* configure: Regenerate.
+
+	* configure.in: Replace ${libstdcxx_version} by its value.
+	Remove reference to mh-dgux.
+	* configure: Regenerate.
+
 2003-03-03  Kevin Buettner  <kevinb@redhat.com>
 
 	* MAINTAINERS (Write After Approval): Add myself.
--- /Users/regress/tbox/changelog_pass/gcc/gcc/ChangeLog	Mon Mar  3 13:27:03 2003
+++ gcc/gcc/ChangeLog	Mon Jun 30 22:04:32 2003
@@ -1,21217 +1,21498 @@
-Mon Mar  3 20:45:25 2003  J"orn Rennecke <joern.rennecke@superh.com>
+2003-07-01  Andreas Jaeger  <aj@suse.de>
 
-	* config/sh/sh.h (EXTRA_SPECS): Add subtarget_asm_relax_spec and
-	subtarget_asm_isa_spec.
-	(SUBTARGET_ASM_RELAX_SPEC, SUBTARGET_ASM_ISA_SPEC): Define.
-	(ASM_SPEC): Define as SH_ASM_SPEC.
-	(SH_ASM_SPEC): New; take the role of ASM_SPEC, but safe from svr4.h.
-	Use subtarget_asm_relax_spec and subtarget_asm_isa_spec.
-	* config/sh/elf.h (ASM_SPEC): Use SH_ASM_SPEC.
-	(SUBTARGET_ASM_ISA_SPEC): Undef / define.
+	* final.c: Convert prototypes to ISO C90.
+	* flow.c: Likewise.
+	* flags.h: Likewise.
+	* gcov-io.c: Likewise.
+	* gcov-io.h: Likewise.
 
-	* sh.h (OVERRIDE_OPTIONS): Set default values for align_loops
-	and align_jumps if not set.
-	Force align_jumps to be at least 2.
-	When relaxing, force align_functions to be at least the maximum of
-	align_loops, align_jumps and 4.
-	* sh.c (find_barrier, barrier_align): Honour align_jumps_log.
-	(sh_loop_align): Honour align_loops_log.
+2003-06-30  Bruno Haible  <bruno@clisp.org>
 
-	* sh.md (length attribute): Use prev_nonnote_insn instead of PREV_INSN
-	to check for indirect_jump_scratch.
-	(indirect_jump_scratch): Add second set.
-	* sh.c (output_far_jump): Use prev_nonnote_insn instead of PREV_INSN
-	when looking for indirect_jump_scratch.
-	Extract scratch register taking new structure of indirect_jump_scratch
-	into account.
-	(gen_block_redirect): Set INSN_SCOPE for indirect_jump_scratch.
+	PR middle-end/6578
+	* libgcc2.c (__subvsi3): Remove simplification that would not work
+	when subtracting -0x80000000.
+	(__subvdi3): Remove simplification that would return a wrong result.
+	(__mulvsi3): Fix overflow check.
+	(__absvdi2): Fix simplification that would return a wrong result.
+	(__mulvdi3): Fix overflow check.
+
+2003-06-30  Jeff Law  <law@redhat.com>
+
+	* stmt.c (any_pending_cleanups): Lose argument THIS_CONTOUR, it
+	was always passed in the value '1'.  Simplify body appropriately.
+	* tree.h (any_pending_cleanups): Corresponding changes.
+	* calls.c: (expand_call): Corresponding changes.
+
+2003-06-30  Kazu Hirata  <kazu@cs.umass.edu>
+
+	* combine.c (distribute_notes): Don't bother REG_WAS_0.
+	* cse.c (cse_insn): Likewise.
+	* final.c (final_scan_insn): Likewise.
+	* jump.c (duplicate_loop_exit_test): Likewise.
+	* rtl.c (reg_note_name): Remove REG_WAS_0.
+	* rtl.h (REG_WAS_0): Remove.
+	* unroll.c (final_reg_note_copy): Don't bother REG_WAS_0.
+	* config/avr/avr.c (output_movqi): Don't use reg_was_0.
+	(output_movhi): Likewise.
+	(output_movsisf): Likewise.
+	(reg_was_0): Remove.
+	* config/m68hc11/m68hc11.c (m68hc11_gen_movhi): Don't use
+	REG_WAS_0.
+	(m68hc11_gen_movqi): Likewise.
+	* config/vax/vax-protos.h: Remove the prototype for
+	reg_was_0_p.
+	* config/vax/vax.c (follows_p): Remove.
+	(reg_was_0_p): Likewise.
+	* config/vax/vax.md (movsi): Don't use reg_was_0_p.
+	(movhi): Likewise.
+	(movqi): Likewise.
+	* doc/rtl.texi (REG_WAS_0): Remove.
+
+2003-06-30  Mark Mitchell  <mark@codesourcery.com>
+
+	* config/rs6000/spe.h (__ev_set_spefscr_frmc): Set the flag.
+
+2003-06-30  Bob Wilson  <bob.wilson@acm.org>
+
+	* config/xtensa/lib1funcs.asm: Use "xtensa-config.h" from
+	top-level include directory.
+	* config/xtensa/lib2funcs.S: Likewise.
+	* config/xtensa/xtensa.h: Likewise.
+	* config/xtensa/xtensa-config.h: Remove.
+	* doc/install.texi: Update location of "xtensa-config.h" header.
+
+2003-06-30  Ulrich Weigand  <uweigand@de.ibm.com>
+
+	* config/s390/s390.c (s390_extra_constraint): New function.
+	* config/s390/s390-protos.h (s390_extra_constraint): Declare it.
+	* config/s390/s390.h (EXTRA_CONSTRAINT): Use it.
+	* config/s390/s390.c (q_constraint): Remove.
+	* config/s390/s390-protos.h (q_constraint): Likewise.
+	* config/s390/s390.h (EXTRA_MEMORY_CONSTRAINT): Add 'R', 'S', 'T'.
+	(EXTRA_ADDRESS_CONSTRAINT): Define.
+
+	* config/s390/s390.c (larl_operand): Refuse out-of-range operands.
+	(DISP_IN_RANGE, s390_short_displacement): New.
+	(legitimate_reload_operand_p): Support long displacements.
+	(s390_decompose_address): Likewise.
+	(legitimize_pic_address): Likewise.
+	(legitimize_address): Likewise.
+	(s390_fixup_clobbered_return_reg): Likewise.
+	(s390_emit_prologue, s390_emit_epilogue): Likewise.
+	(s390_output_mi_thunk): Likewise.
 
-Mon Mar  3 19:07:21 CET 2003  Jan Hubicka  <jh@suse.cz>
+	* config/s390/s390.md (attr "op_type"): Add "RXY", "RSY", "SIY".
+	(attr "atype", attr "length"): Add defaults for new op_types.
+	(all insns): Change op_type attribute where appropriate.
+
+	("*movdi_lay", "*movsi_lay", "*extendqidi2", "*extendqisi2"): New insns.
+	("*tmqi_ext", "*tmdi_mem", "*tmsi_mem", "*tmhi_mem", *tmqi_mem",
+	"*tstsi", "*tstsi_cconly", "*tsthiCCT", "*tsthiCCT_cconly",
+	"*tsthi", "*tsthi_cconly", "*tstqiCCT", "*tstqiCCT_cconly",
+	"*tstqi", "*tstqi_cconly", "*cmpsi_ccs_sign", "*cmpsi_ccs",
+	"*cmpsi_ccu", "*cmphi_ccu", "*cmpqi_ccu", "*cli",
+	"movti", "*movdi_64", "*movdi_31", "*movsi", "movhi", "movqi_64",
+	"movqi", "*movstrictqi", "*movstricthi", "movstrictsi",
+	"*movdf_64", "*movdf_31", "*movsf",
+	"*load_multiple_si", "*store_multiple_di",
+	"*sethighqisi", "*sethighhisi", "*sethighqidi_31", "*extendhisi2",
+	"*la_64", "*la_31", "*la_31_and", "force_la_31",
+	"*addsi3_carry1_cc", *addsi3_carry1_cconly",
+	"*addsi3_carry2_cc", *addsi3_carry2_cconly",
+	"*addsi3_cc", "*addsi3_cconly", "*addsi3_cconly2",
+	"*addsi3_sign", "*addsi3_sub", "addsi3",
+	"*subsi3_borrow_cc", "*subsi3_borrow_cconly", "*subsi3_cc",
+	"*subsi3_cconly", "*subsi3_sign", "*subsi3_sub", "subsi3",
+	"mulsi3"
+	"*andsi3_cc", "*andsi3_cconly", "andsi3",
+	"*andqi3_ss", "*andqi3_ss_inv",
+	"*iorsi3_cc", "*iorsi3_cconly", "iorsi3",
+	"*iorqi3_ss", "*iorqi3_ss_inv",
+	"*xorsi3_cc", "*xorsi3_cconly", "xorsi3",
+	"*xorqi3_ss", "*xorqi3_ss_inv",
+	"*tls_load_31"): Add alternatives for long-displacement instructions.
+
+	("*cmpdf_ccs", "*cmpdf_ccs_ibm", "*cmpsf_ccs", "*cmpsf_ccs_ibm",
+	"*load_multiple_di", "*store_multiple_di",
+	"*sethighqidi_64", "*zero_extendhisi2_31",
+	"truncdfsf2_ibm", "extendsfdf2_ieee", "extendsfdf2_ibm",
+	"adddf3", "*adddf3", "*adddf3_ibm",
+	"addsf3", "*addsf3", "*addsf3_ibm",
+	"subdf3", "*subdf3", "*subdf3_ibm",
+	"subsf3", "*subsf3", "*subsf3_ibm",
+	"mulsi_6432", "divmoddisi3",
+	"muldf3", "*muldf3", "*muldf3_ibm",
+	"mulsf3", "*mulsf3", "*mulsf3_ibm",
+	"divdf3", "*divdf3", "*divdf3_ibm",
+	"divsf3", "div*sf3", "*divsf3_ibm",
+	"sqrtdf2", "sqrtsf2",
+	"*cjump_long", "*icjump_long", "indirect_jump", "casesi_jump",
+	"*doloop_si_long", "*doloop_di_long", "bas_64", "bas_31",
+	"bas_r_64", "bas_r_31", "bas_tls_31", "bas_tls_64"): Adapt memory
+	and address constraints for instructions that do not accept long
+	displacements.
+
+2003-06-30  Hartmut Penner  <hpenner@de.ibm.com>
+            Ulrich Weigand  <uweigand@de.ibm.com>
+
+	* config/s390/2084.md: New file.
+	* config/s390/s390.md: Include it.
+	* config/s390/s390.c (s390_adjust_priority): New function.
+	(TARGET_SCHED_ADJUST_PRIORITY): Define.
+	(s390_first_cycle_multipass_dfa_lookahead): New function.
+	(TARGET_SCHED_FIRST_CYCLE_MULTIPASS_DFA_LOOKAHEAD): Define.
+	(s390_sched_reorder2): New function.
+	(TARGET_SCHED_REORDER2): Define.
+	(s390_adjust_cost): Support PROCESSOR_2084_Z990 cpu type.
+	(s390_issue_rate): Likewise.
+
+Mon Jun 30 23:47:33 CEST 2003  Jan Hubicka  <jh@suse.cz>
+
+	* Makefile.in (GTFILES): Add cgraph.h.
+	* cgraph.c (known_decls): Remove.
+	(cgraph_hash, cgraph_nodes, cgraph_nodes_queue,
+	cgraph_varpool_hash, cgraph_varpool_nodes_queue): GTYize.
+	(cgraph_node): Do not allocate known_decls; use polutate hashtable.
+	(cgraph_varpool_node): Likewise; add next pointer.
+	(cgraph_varpool_nodes): New static variable.
+	* cgraph.h (cgraph_local_info, cgraph_global_info, cgraph_rtl_info,
+	cgraph_node, cgraph_edge, cgraph_varpool_node, cgraph_nodes, cgraph_n_nodes,
+	cgraph_varpool_n_nodes, cgraph_varpool_nodes_queue): GTYize.
+	* gengtype.c (open_base_files): Include cgraph.h
 
-	* calls.c (rtx_for_function_call): Take the address as an argument
-	(expand_call): Do not modify the expression.
+2003-06-30  Volker Reichelt  <reichelt@igpm.rwth-aachen.de>
 
-	* toplev.c (rest_of_compilation):  Avoid cfg_cleanup calls when not
-	optimizing.
+	* Changelog: Remove ">>>>>>>" from previous change.
 
-2003-03-03  Kazu Hirata  <kazu@cs.umass.edu>
+2003-06-30  Volker Reichelt  <reichelt@igpm.rwth-aachen.de>
 
-	* config/h8300/h8300.md (*ixorsi3_zext_hi): Restrict to
-	TARGET_H8300H and TARGET_H8300S.
+	* config/cris/cris.c: Fix spelling for "testcase".
+	* config/cris/cris.h: Likewise.
+	* config/cris/cris.md: Likewise.
+	* config/mmix/crti.asm: Likewise.
+	* config/mmix/mmix.h: Likewise.
+	* config/mmix/mmix.md: Likewise.
 
-2003-03-03  Kazu Hirata  <kazu@cs.umass.edu>
+2003-06-30  Kazu Hirata  <kazu@cs.umass.edu>
 
-	* config/h8300/h8300.md (a peephole2): New.
+	* config/h8300/h8300.h (LEGITIMATE_CONSTANT_P): Make it always
+	1.
 
-2003-03-03  Kazu Hirata  <kazu@cs.umass.edu>
+2003-06-30  Ulrich Weigand  <uweigand@de.ibm.com>
 
-	* config/h8300/h8300.md (*extzv_8_8): Use shorter code when
-	operands[0] and operands[1] are different.
+	* config.gcc [s390*-*-*]: Support --with-arch, --with-tune, and
+	--with-mode configure options.
+	* config/s390/s390.h (OPTION_DEFAULT_SPECS): Define.
+	(DRIVER_SELF_SPECS): Define.
+	* config/s390/linux.h (ASM_SPEC): Pass architecture mode and cpu
+	architecture to assembler.
+	(LINK_SPEC): Merge 31-bit and 64-bit variants.
+	(LINK_ARCH31_SPEC, LINK_ARCH64_SPEC, EXTRA_SPECS): Remove.
+	* config/s390/s390.c (override_options): New default rules for
+	architecture mode and cpu architecture selection.
+	* doc/invoke.texi (-mesa, -mzarch, -march, -mtune): Document
+	new default rules.
+
+	* config/s390/s390.h (enum processor_type): Add PROCESSOR_2084_Z990.
+	* config/s390/s390.md (attr "cpu"): Add "z990" processor type.
+	* config/s390/s390.c (override_options): Add "z990" to
+	processor_alias_table.
+	* doc/invoke.texi (-march): Document "z990" processor type.
+
+	* config/s390/s390.c (s390_tune_flags, s390_arch_flags): New variables.
+	* config/s390/s390.h (s390_tune_flags, s390_arch_flags): Declare.
+	(enum processor_flags, TARGET_CPU_IEEE_FLOAT, TARGET_CPU_ZARCH,
+	TARGET_CPU_LONG_DISPLACEMENT, TARGET_LONG_DISPLACEMENT): New.
+	* config/s390/s390.c (override_options): Replace enum pta_flags by
+	enum processor_flags.  Fill in s390_tune_flags and s390_arch_flags.
+
+	* config/s390/s390.c (s390_cpu): Rename to ...
+	(s390_tune): ... this.
+	* config/s390/s390.h (s390_cpu, s390_tune): Likewise.
+	* config/s390/s390.c (s390_issue_rate, override_options): Likewise.
+	* config/s390/s390.md (attr "cpu"): Likewise.
+
+2003-06-30  Neil Booth  <neil@daikokuya.co.uk>
+
+	* c-common.c (enum c_language_kind, flag_objc): Remove.
+	(fix_string_type, check_case_value, c_common_nodes_and_builtins,
+	c_add_case_label, finish_label_addr_expr, boolean_increment):
+	Use c_dialect_ macros.
+	* c-common.h (enum c_language_kind): Extend.
+	(c_dialect_cxx, c_dialect_objc): New.
+	(flag_objc): Remove.
+	(c_common_init_options): Update prototype.
+	* c-cppbuiltin.c (define__GNUC__, c_cpp_builtins): Use c_dialect_
+	macros.
+	* c-decl.c (finsih_decl, grokfield, finish_struct): Use c_dialect_
+	macros.
+	* c-format.c (C_STD_VER, C_STD_NAME): Similarly.
+	* c-lang.c (c_init_options): Remove.
+	(c_language): Define.
+	(LANG_HOOKS_INIT_OPTIONS): Use common hook.
+	* c-lex.c (lex_charconst): Use c_dialect_ macros.
+	* c-opts.c (lang_flags): Make function-local.
+	(c_common_init_options): Use c_dialect_ macros.  Handle
+	C++ diagnostic requirements.
+	(c_common_handle_option, c_common_post_options): Use flag_cxx.
+	* c-parse.in (init_reswords): Use c_dialect_objc ().
+	* c-pch.c (get_ident): Use c_language.
+	* c-pretty-print.c (pp_c_bool_literal): Use c_dialect_ macros.
+	* c-typeck.c (comptypes, build_c_cast): Similarly.
+	* objc/objc-lang.c (c_language): Define.
+	(LANG_HOOKS_INIT_OPTIONS): Use common hook.
+	(objc_init_options): Remove.
+
+2003-06-30  Kazu Hirata  <kazu@cs.umass.edu>
+
+	* config/alpha/alpha.h (FUNCTION_ARG_PADDING): Remove.
+	* config/alpha/unicosmk.h: Don't #undef FUNCTION_ARG_PADDING.
+
+2003-06-30  Wolfgang Bangerth  <bangerth@dealii.org>
+
+	* doc/sourcebuild.texi: Don't reference gnats.html any more.
 
-2003-03-03  Kazu Hirata  <kazu@cs.umass.edu>
+2003-06-30  Kazu Hirata  <kazu@cs.umass.edu>
 
-	* reload1.c (reload_cse_move2add): Remove variable success.
+	* config/h8300/h8300.c (compute_mov_length): Fix length of
+	mov:SF on H8/300.
 
-2003-03-02  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>
+2003-06-30  Nick Clifton  <nickc@redhat.com>
 
-	* ggc-common.c (ggc_rlimit_bound): Cast RLIM_INFINITY to avoid
-	warnings.
+	* config/arm/arm.h (BIGGEST_FIELD_ALIGNMENT): Make defintion
+	constant.
 
-2003-03-02  Richard Henderson  <rth@redhat.com>
+Mon Jun 30 15:36:29 CEST 2003  Jan Hubicka  <jh@suse.cz>
 
-	* configure.in (HAVE_AS_LTOFFX_LDXMOV_RELOCS): New ia64 test.
-	* config.in, configure: Rebuild.
-	* config/ia64/ia64.c (ia64_ld_address_bypass_p): Accept lo_sum.
-	* config/ia64/ia64.md (load_symptr): Use high/lo_sum for the 
-	paired ldtoffx and ldxmov annotations.
-	(load_symptr_internal1): Remove.
-	(load_symptr_high, load_symptr_low): New.
+	(fyl2x_sfxf3, fyl2x_dfxf3, fscale_sfxf3, fscale_dfxf3): Fix condition.
 
-2003-03-02  Neil Booth  <neil@daikokuya.co.uk>
+2003-06-30 Hartmut Penner  <hpenner@de.ibm.com>
 
-	* c-incpath.c (add_path): Fix sysp assignment.
+        * config/rs6000/rs6000.c (rs6000_split_altivec_in_gprs): New function.
+        (altivec_in_gprs_p): New function.
 
-2003-03-02  Kurt Garloff  <garloff@suse.de>
+	* config/rs6000/rs6000-protos (rs6000_split_altivec_in_gprs): New
+	prototype.
+	(altivec_in_gprs_p): New prototype.
 
-	* params.def: Introduce parameter max-inline-insns-rtl for
-	a separate limit for the RTL inliner.
-	* params.h: Likewise.
-	* integrate.c (function_cannot_inline_p): Use it.
-	* toplev.c (decode_f_option): Set multiple parameters 
-	controlling inlining with -finline-limit.
-	* params.def: Fix orthographic and typographic errors.
-	* doc/invoke.texi: Document parameters controlling inlining
-	and the way -finline-limit sets multiple of them.
+	* config/rs6000/altivec.md (*movv4si_internal): Change
+	multi-assembler alternative to '#'. Add postreload splitter to
+	handle this cases.
+	(*movv4hi_internal): Likewise.
+	(*movv4qi_internal): Likewise.
+	(*movv4sf_internal): Likewise.
 
-	* tree.h (struct tree_decl): Introduce inlined_function_flag,
-	recording whether the function became eligible for inlining
-	by a compiler flag rather than the declaration.
-	Provide DID_INLINE_FUNC macro to access it.
-	* c-decl.c (grokdeclarator): Set DID_INLINE_FUNC.
-	* cp/decl.c (grokfndecl): Likewise.
-	* toplev.c (rest_of_compilation): Likewise.
-	* cp/optimize (maybe_clone_body): Copy DID_INLINE_FUNC.
-	* print-tree.c (print_node): Report it.
-	* params.def: Introduce new max-inline-insns-auto limit.
-	* params.h: Likewise.
-	* tree-inline.c (inlinable_function_p): Apply it to functions
-	with DID_INLINE_FUNC set.
-	* toplev.c (decode_f_option): Initialize it from -finline-limit
-	value.
-	* doc/invoke.texi: Document new parameter.
+2003-06-30  Jason Merrill  <jason@redhat.com>
 
-2003-03-02  Geoffrey Keating  <geoffk@apple.com>
+	* defaults.h (PUSH_ARGS_REVERSED): Define default here.
+	* calls.c: Not here.
 
-	* fix-header.c (read_scan_file): Don't reference simplify_path.
+2003-06-30  Ben Elliston  <bje@wasabisystems.com>
 
-2003-03-02  Stephane Carrez  <stcarrez@nerim.fr>
+	* config/arm/arm.c (arm_rtx_costs): Remove #if 0 block.
+	(bad_signed_byte_operand): Likewise.
+	(arm_output_epilogue): Likewise.
+	(arm_final_prescan_insn): Likewise.
 
-	* config/m68hc11/m68hc11.c (m68hc11_override_options): Don't enable
-	min/max instructions by default as may result in reload errors.
+2003-06-30  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
 
-2003-03-02  Stephane Carrez  <stcarrez@nerim.fr>
+	* cfgrtl.c (mark_killed_regs): Cast HARD_REGNO_NREGS to int.
 
-	* config/m68hc11/m68hc11.md ("mulqi3"): Allow address register to
-	avoid reload problems; define split for it.
+2003-06-30  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
 
-2003-03-02  Stephane Carrez  <stcarrez@nerim.fr>
+	* c-pch.c (c_common_write_pch): Flush asm_out_file to allow for
+	subsequent writes.
 
-	* config/m68hc11/m68hc11.c (m68hc11_shift_operator): New function.
-	* config/m68hc11/m68hc11-protos.h (m68hc11_shift_operator): Declare.
-	* config/m68hc11/m68hc11.h (PREDICATE_CODES): Register.
-	* config/m68hc11/m68hc11.md ("rotrhi3", "rotlhi3"): New patterns for 
-	rotatert and rotate.
-	("rotrhi3_const", "rotlhi3_const"): Rename of old 'rotrhi3' insns.
-	("*rotrhi3", "*rotlhi3"): New insn pattern for non-const rotatert.
-	("*rotrhi3_addr"): New split for shift insns on address register.
-	("*lshrhi3", "*ashrhi3", "*ashlhi3_2"): Use new split.
-	* config/m68hc11/larith.asm (___rotlhi3): New asm function.
-	(___rotrhi3): Likewise.
-	* config/m68hc11/t-m68hc11-gas (LIB1ASMFUNCS): Build them.
+Mon Jun 30 10:03:02 CEST 2003  Jan Hubicka  <jh@suse.cz>
 
-2003-03-02  Neil Booth  <neil@daikokuya.co.uk>
+	* cfgrtl.c (verify_flow_info): Accept degenerated condjumps
+	in cfglayout mode.
 
-	* toplev.c (aux_base_name): Moved from toplev.h.
-	(filename): Constify.
-	(lang_dependent_init): Don't duplicate name.
-	(process_options): Set aux_base_name here, not...
-	(do_compile): ...here.  Change protoype.
-	(toplev_main): Move some code from do_compile.
-	* toplev.h: Remove aux_base_name.
+Mon Jun 30 09:52:39 CEST 2003  Jan Hubicka  <jh@suse.cz>
 
-2003-03-02  Kazu Hirata  <kazu@cs.umass.edu>
+	* i386.c (standard_80387_constant_p): Accept TFmode constants too.
+	(init_ext_80387_constants): Likewise.
+	(standard_80387_constant_rtx): Likewise.
+	* i386.md (atanxf): Disable for TARGET_128BIT_LONG_LONG
+	(atantf): Disable for !TARGET_128BIT_LONG_LONG
+	(fyl2x_sfxf3, fyl2x_dfxf3): Accept TFmode operands.
+	(fyl2x_xfxf3, fyl2x_tfxf3): Enable/disable as needed.
+	(fscale_sfxf3, fscale_dfxf3): Accept TFmode operands.
+	(fscale_xfxf3, fscale_tfxf3): Enable/disable as needed.
+	(frndinttf2): New.
+	(f2xm1tf2): New.
+	(exp?f2): Use expsf2_tf when needed.
+	(exp?f2_tf): New.
+	(exptf): New.
 
-	* config/h8300/h8300-protos.h: Add a prototype for
-	iorxor_operator.
-	* config/h8300/h8300.c (print_operand): Handle 'c'.
-	(iorxor_operator): New.
-	* config/h8300/h8300.h (PREDICATE_CODES): Add iorxor_operator.
-	* config/h8300/h8300.md (*iorhi3_zext): Remove.
-	(*iorsi3_zexthi): Likewise.
-	(*iorsi3_zextsi): Likewise.
-	(*xorhi3_zextqi): Likewise.
-	(*xorsi3_zexthi): Likewise.
-	(*xorsi3_zextsi): Likewise.
-	(*ixorhi3_zext): New.
-	(*ixorsi3_zext_qi): Likewise.
-	(*ixorsi3_zext_hi): Likewise.
+2003-06-29 Uwe Stieber <uwe@kaos-group.de>
 
-2003-03-02  Neil Booth  <neil@daikokuya.co.uk>
+	* config.gcc (sh*-*-kaos*): Put tm_file setting in separate case
+	statement from tmake_file set.
 
-	* c-incpath.c (remove_component_p, simplify_path): Move back to
-	cppfiles.c.
-	(remove_duplicates): Use cpp_simplify_path.
-	* c-incpath.h (simplify_path): Remove.
-	* c-lex.c: Don't include c-incpath.h.
-	(init_c_lex): Remove simplify_path.
-	* cppfiles.c (remove_component_p, cpp_simplify_path): Restore.
-	(find_or_create_entry, validate_pch): Revert.
+2003-06-29  James E Wilson  <wilson@tuliptree.org>
 
-2003-03-02  Ashif Harji  <asharji@uwaterloo.ca>
+	* reload.c (find_reloads): Change push_reloads to push_reload in
+	comment.
+	* reload1.c (eliminate_regs): Likewise.
+	(dump_needs): Delete prototype for deleted function.
 
-	* gcc.c (default_compilers): Add -no-integrated-cpp flag to invoke
-	  an external cpp during compilation.
-	(option_map): Likewise.
-	* objc/lang-specs.h (default_compilers): Similarly.
-	* doc/invoke.texi: Document -no-integrated-cpp flag.
+2003-06-29  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>
 
-2003-03-02  Kazu Hirata  <kazu@cs.umass.edu>
+	* builtin-attrs.def (gcc_diag, gcc_cdiag, gcc_cxxdiag): New
+	format attributes.
+	* c-format.c (enum format_type): Add gcc_diag_format_type,
+	gcc_cdiag_format_type, and gcc_cxxdiag_format_type.
+	(gcc_diag_length_specs, gcc_cdiag_length_specs,
+	gcc_cxxdiag_length_specs, gcc_diag_flag_pairs,
+	gcc_cdiag_flag_pairs, gcc_cxxdiag_flag_pairs, gcc_diag_flag_specs,
+	gcc_cdiag_flag_specs, gcc_cxxdiag_flag_specs, gcc_diag_char_table,
+	gcc_cdiag_char_table, gcc_cxxdiag_char_table): New.
+	(format_types_orig): Add new data.
+	(find_char_info_specifier_index, init_dynamic_diag_info): New
+	functions.
+	(handle_format_attribute): Update to handle new format attributes.
 
-	* config/h8300/h8300.md (zero_extendqisi2): Change to an
-	expander.
-	(*zero_extendqisi2_h8300): New.
-	(*zero_extendqisi2_h8300hs): New.
-	(two splitters): New.
+2003-06-29  Aaron W. LaFramboise  <awlaframboise@aol.com>
 
-2003-03-02  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>
+	* config/i386/gthr-win32.h (__GTHREAD_HIDE_WIN32API): Define to 1.
 
-	* fp-bit.h (float_to_usi): Fix condition wrapping prototype.
+2003-06-29  Dara Hazeghi  <dhazeghi@yahoo.com>
 
-2003-03-01  Kazu Hirata  <kazu@cs.umass.edu>
+	* doc/install.texi: Remove install documentation for obsoleted targets
+	i?86-*-sco, i?86-*-sco3.2v4, powerpcle-*-pe, powerpcle-*-winnt,
+	arm-*-aof.
+	Update information about IA64 toolchain, AIX make requirements,
+	and binutils for m68k-*-hpux and *-*-linuxaout targets.
 
-	* config/h8300/h8300.md (a peephole2): Remove dead code.
+Mon Jun 30 00:50:43 CEST 2003  Jan Hubicka  <jh@suse.cz>
 
-2003-03-01  Roger Sayle  <roger@eyesopen.com>
+	* regmove.c (regmove_optimize): Don't try to make src and dst match
+	when they are in different modes.
 
-	PR c++/9367
-	* builtin-types.def (DEF_FUNCTION_TYPE_VAR_3): New macro.
-	(BT_FN_INT_CONST_STRING_VALIST_ARG,
-	BT_FN_INT_STRING_CONST_STRING_VALIST_ARG,
-	BT_FN_INT_CONST_STRING_CONST_STRING_VALIST_ARG,
-	BT_FN_INT_STRING_SIZE_CONST_STRING_VALIST_ARG,
-	BT_FN_INT_STRING_CONST_STRING_VAR,
-	BT_FN_INT_CONST_STRING_CONST_STRING_VAR,
-	BT_FN_INT_STRING_SIZE_CONST_STRING_VAR): New built-in types.
-	* builtin-attrs.def (ATTR_NONNULL_1, ATTR_NONNULL_2,
-	ATTR_NONNULL_3): Also include the nothrow attribute.
-	(sprintf, scanf, sscanf, vprintf, vsprintf, snprintf,
-	vsnprintf, vscanf, vsscanf): Don't define attributes here.
-	* builtins.def (putchar, puts): Make full C89 built-ins.
-	(snprintf, sprintf, scanf, sscanf, vprintf, vscanf,
-	vsscanf, vsnprintf, vsprintf): New built-ins.
-	* c-common.c (c_common_nodes_and_builtins): Handle new macro
-	DEF_FUNCTION_TYPE_VAR_3.
+Sun Jun 29 23:06:32 CEST 2003  Jan Hubicka  <jh@suse.cz>
 
-	* doc/extend.texi: Document these new built-in functions.
+	* builtins.c (expand_builtin_mathfn, expand_builtin_mathfn_2): Avoid
**** TRUNCATED ****
-------------- next part --------------
-- 
Geoffrey Keating <geoffk@apple.com> 
(via an automated GCC regression-testing script.)


More information about the Gcc-regression mailing list