[PATCH 00/13] [RFC] Support Intel APX EGPR
Hongyu Wang
hongyu.wang@intel.com
Thu Aug 31 08:20:11 GMT 2023
Intel Advanced performance extension (APX) has been released in [1].
It contains several extensions such as extended 16 general purpose registers
(EGPRs), push2/pop2, new data destination (NDD), conditional compare
(CCMP/CTEST) combined with suppress flags write version of common instructions
(NF). This RFC focused on EGPR implementation in GCC.
APX introduces a REX2 prefix to help represent EGPR for several legacy/SSE
instructions. For the remaining ones, it promotes some of them using evex
prefix for EGPR. The main issue in APX is that not all legacy/sse/vex
instructions support EGPR. For example, instructions in legacy opcode map2/3
cannot use REX2 prefix since there is only 1bit in REX2 to indicate map0/1
instructions, e.g., pinsrd. Also, for most vector extensions, EGPR is supported
in their evex forms but not vex forms, which means the mnemonics with no evex
forms also cannot use EGPR, e.g., vphaddw.
Such limitation brings some challenge with current GCC infrastructure.
Generally, we use constraints to guide register allocation behavior. For
register operand, it is easy to add a new constraint to certain insn and limit
it to legacy or REX registers. But for memory operand, if we only use
constraint to limit base/index register choice, reload has no backoff when
process_address allocates any egprs to base/index reg, and then any post-reload
pass would get ICE from the constraint.
Here is what we did to address the issue:
Middle-end:
- Add rtx_insn parameter to base_reg_class, reuse the
MODE_CODE_BASE_REG_CLASS macro with rtx_insn parameter.
- Add index_reg_class like base_reg_class, calls new INSN_INDEX_REG_CLASS
macro with rtx_insn parameter.
- In process_address_1, add rtx_insn parameter to call sites of
base_reg_class, replace usage of INDEX_REG_CLASS to index_reg_class with
rtx_insn parameter.
Back-end:
- Extend GENERAL_REG_CLASS, INDEX_REG_CLASS and their supersets with
corresponding regno checks for EGPRs.
- Add GENERAL_GPR16/INDEX_GPR16 class for old 16 GPRs.
- Whole component is controlled under -mapxf/TARGET_APX_EGPR. If it is
not enabled, clear r16-r31 in accessible_reg_set.
- New register_constraint “h” and memory_constraint “Bt” that disallows
EGPRs in operand.
- New asm_gpr32 flag option to enable/disable gpr32 for inline asm,
disabled by default.
- If asm_gpr32 is disabled, replace constraints “r” to “h”, and
“m/memory” to “Bt”.
- Extra insn attribute gpr32, value 0 indicates the alternative cannot
use EGPRs.
- Add target functions for base_reg_class and index_reg_class, calls a
helper function to verify if insn can use EGPR in its memory_operand.
- In the helper function, the verify process works as follow:
1. Returns true if APX_EGPR disabled or insn is null.
2. If the insn is inline asm, returns asm_gpr32 flag.
3. Returns false for unrecognizable insn.
4. Save recog_data and which_alternative, extract the insn, and restore them
before return.
5. Loop through all enabled alternatives, if one of the enabled alternatives
have attr_gpr32 0, returns false, otherwise returns true.
- For insn alternatives that cannot use gpr32 in register_operand, use h
constraint instead of r.
- For insn alternatives that cannot use gpr32 in memory operand, use Bt
constraint instead of m, and set corresponding attr_gpr32 to 0.
- Split output template with %v if the sse version of mnemonic cannot use
gpr32.
- For insn alternatives that cannot use gpr32 in memory operand, classify
the isa attribute and split alternatives to noavx, avx_noavx512f and etc., so
the helper function can properly loop through the available enabled mask.
Specifically for inline asm, we currently just map “r/m/memory” constraints as
an example. Eventually we will support entire mapping of all common constraints
if the mapping method was accepted.
Also, for vex instructions, currently we assume egpr was supported if they have
evex counterpart, since any APX enabled machine will have AVX10 support for all
the evex encodings. We just disabled those mnemonics that doesn’t support EGPR.
So EGPR will be allowed under -mavx2 -mapxf for many vex mnemonics.
We haven’t disabled EGPR for 3DNOW/XOP/LWP/FMA4/TBM instructions, as they will
be co-operated with -mapxf. We can disable EGPR for them if AMD guys requires.
For testing, currently we tested GCC testsuite and spec2017 with -maxf+sde
simulater and no more errors. Also, we inverted the register allocation order
to force r31 to be allocated first, and no more error except those AMD only
instructions. We will conduct further tests like changing all do-compile to
do-assemble and add more to gcc/testsuite in the future.
The RFC intends to describe our approach for APX implementation for EGPR
component. It may still have potential issues or bugs and requires futher
optimization. Any comments are very appreciated.
[1]. https://www.intel.com/content/www/us/en/developer/articles/technical/advanced-performance-extensions-apx.html.
Hongyu Wang (2):
[APX EGPR] middle-end: Add index_reg_class with insn argument.
[APX EGPR] Handle GPR16 only vector move insns
Kong Lingling (11):
[APX EGPR] middle-end: Add insn argument to base_reg_class
[APX_EGPR] Initial support for APX_F
[APX EGPR] Add 16 new integer general purpose registers
[APX EGPR] Add register and memory constraints that disallow EGPR
[APX EGPR] Map reg/mem constraints in inline asm to non-EGPR
constraint.
[APX EGPR] Add backend hook for base_reg_class/index_reg_class.
[APX EGPR] Handle legacy insn that only support GPR16 (1/5)
[APX EGPR] Handle legacy insns that only support GPR16 (2/5)
[APX EGPR] Handle legacy insns that only support GPR16 (3/5)
[APX_EGPR] Handle legacy insns that only support GPR16 (4/5)
[APX EGPR] Handle vex insns that only support GPR16 (5/5)
gcc/addresses.h | 25 +-
gcc/common/config/i386/cpuinfo.h | 12 +-
gcc/common/config/i386/i386-common.cc | 17 +
gcc/common/config/i386/i386-cpuinfo.h | 1 +
gcc/common/config/i386/i386-isas.h | 1 +
gcc/config/avr/avr.h | 5 +-
gcc/config/gcn/gcn.h | 4 +-
gcc/config/i386/constraints.md | 26 +-
gcc/config/i386/cpuid.h | 1 +
gcc/config/i386/i386-isa.def | 1 +
gcc/config/i386/i386-options.cc | 15 +
gcc/config/i386/i386-opts.h | 8 +
gcc/config/i386/i386-protos.h | 9 +
gcc/config/i386/i386.cc | 253 +++++-
gcc/config/i386/i386.h | 69 +-
gcc/config/i386/i386.md | 144 ++-
gcc/config/i386/i386.opt | 30 +
gcc/config/i386/mmx.md | 170 ++--
gcc/config/i386/sse.md | 859 ++++++++++++------
gcc/config/rl78/rl78.h | 6 +-
gcc/doc/invoke.texi | 11 +-
gcc/doc/tm.texi | 17 +-
gcc/doc/tm.texi.in | 17 +-
gcc/lra-constraints.cc | 32 +-
gcc/reload.cc | 34 +-
gcc/reload1.cc | 2 +-
gcc/testsuite/gcc.target/i386/apx-1.c | 8 +
.../gcc.target/i386/apx-egprs-names.c | 17 +
.../gcc.target/i386/apx-inline-gpr-norex2.c | 108 +++
.../gcc.target/i386/apx-interrupt-1.c | 102 +++
.../i386/apx-legacy-insn-check-norex2-asm.c | 5 +
.../i386/apx-legacy-insn-check-norex2.c | 181 ++++
.../gcc.target/i386/apx-spill_to_egprs-1.c | 25 +
gcc/testsuite/lib/target-supports.exp | 10 +
34 files changed, 1747 insertions(+), 478 deletions(-)
create mode 100644 gcc/testsuite/gcc.target/i386/apx-1.c
create mode 100644 gcc/testsuite/gcc.target/i386/apx-egprs-names.c
create mode 100644 gcc/testsuite/gcc.target/i386/apx-inline-gpr-norex2.c
create mode 100644 gcc/testsuite/gcc.target/i386/apx-interrupt-1.c
create mode 100644 gcc/testsuite/gcc.target/i386/apx-legacy-insn-check-norex2-asm.c
create mode 100644 gcc/testsuite/gcc.target/i386/apx-legacy-insn-check-norex2.c
create mode 100644 gcc/testsuite/gcc.target/i386/apx-spill_to_egprs-1.c
--
2.31.1
More information about the Gcc-patches
mailing list