[PATCH] gcc/configure.ac: fix register issue for global_load assembler functions

Marcel Vollweiler marcel@codesourcery.com
Wed Jun 9 14:47:21 GMT 2021


This patch fixes an issue with global_load assembler functions leading
to a "invalid operand for instruction" error since in different LLVM
versions those functions use either one or two registers.

In this patch a compatibility check is added to the configure.ac.

Marcel
-----------------
Mentor Graphics (Deutschland) GmbH, Arnulfstrasse 201, 80634 München Registergericht München HRB 106955, Geschäftsführer: Thomas Heurung, Frank Thürauf
-------------- next part --------------
gcc/ChangeLog: adapt configuration according to assembler fix of global_load functions.

	* config.in: Regenerate.
	* config/gcn/gcn.c (print_operand_address): Fix for global_load assembler
	functions.
	* configure: Regenerate.
	* configure.ac: Fix for global_load assembler functions. 

diff --git a/gcc/config.in b/gcc/config.in
index e54f59c..18e6271 100644
--- a/gcc/config.in
+++ b/gcc/config.in
@@ -1431,6 +1431,12 @@
 #endif
 
 
+/* Define if your assembler has fixed global_load functions. */
+#ifndef USED_FOR_TARGET
+#undef HAVE_GCN_ASM_GLOBAL_LOAD_FIXED
+#endif
+
+
 /* Define to 1 if you have the `getchar_unlocked' function. */
 #ifndef USED_FOR_TARGET
 #undef HAVE_GETCHAR_UNLOCKED
diff --git a/gcc/config/gcn/gcn.c b/gcc/config/gcn/gcn.c
index 283a91f..2d27296 100644
--- a/gcc/config/gcn/gcn.c
+++ b/gcc/config/gcn/gcn.c
@@ -5481,13 +5481,24 @@ print_operand_address (FILE *file, rtx mem)
 	      if (vgpr_offset == NULL_RTX)
 		/* In this case, the vector offset is zero, so we use the first
 		   lane of v1, which is initialized to zero.  */
-		fprintf (file, "v[1:2]");
+		{
+#if HAVE_GCN_ASM_GLOBAL_LOAD_FIXED == 1
+		    fprintf (file, "v1"); 
+#else
+		    fprintf (file, "v[1:2]");
+#endif
+		}
 	      else if (REG_P (vgpr_offset)
 		       && VGPR_REGNO_P (REGNO (vgpr_offset)))
 		{
-		  fprintf (file, "v[%d:%d]",
-			   REGNO (vgpr_offset) - FIRST_VGPR_REG,
-			   REGNO (vgpr_offset) - FIRST_VGPR_REG + 1);
+#if HAVE_GCN_ASM_GLOBAL_LOAD_FIXED == 1
+		    fprintf (file, "v%d",
+			     REGNO (vgpr_offset) - FIRST_VGPR_REG);
+#else
+		    fprintf (file, "v[%d:%d]",
+			     REGNO (vgpr_offset) - FIRST_VGPR_REG,
+			     REGNO (vgpr_offset) - FIRST_VGPR_REG + 1);
+#endif
 		}
 	      else
 		output_operand_lossage ("bad ADDR_SPACE_GLOBAL address");
diff --git a/gcc/configure b/gcc/configure
index 4a9e4fa..8e044c3 100755
--- a/gcc/configure
+++ b/gcc/configure
@@ -28909,6 +28909,36 @@ case "$target" in
     ;;
 esac
 
+# This tests if the assembler supports two registers for global_load functions
+# (like in LLVM versions <12) or one register (like in LLVM 12).
+case "$target" in
+  amdgcn-* | gcn-*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler fix for global_load functions" >&5
+$as_echo_n "checking assembler fix for global_load functions... " >&6; }
+    gcc_cv_as_global_load_fixed=yes
+    if test x$gcc_cv_as != x; then
+      cat > conftest.s <<EOF
+	global_store_dwordx2    v[1:2], v[4:5], s[14:15]
+EOF
+      if $gcc_cv_as -triple=amdgcn--amdhsa -filetype=obj -mcpu=gfx900 -o conftest.o conftest.s > /dev/null 2>&1; then
+        gcc_cv_as_global_load_fixed=no
+      fi
+      rm -f conftest.s conftest.o conftest
+    fi
+    if test x$gcc_cv_as_global_load_fixed = xyes; then
+
+$as_echo "#define HAVE_GCN_ASM_GLOBAL_LOAD_FIXED 1" >>confdefs.h
+
+    else
+
+$as_echo "#define HAVE_GCN_ASM_GLOBAL_LOAD_FIXED 0" >>confdefs.h
+
+    fi
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_global_load_fixed" >&5
+$as_echo "$gcc_cv_as_global_load_fixed" >&6; }
+    ;;
+esac
+
 # ??? Not all targets support dwarf2 debug_line, even within a version
 # of gas.  Moreover, we need to emit a valid instruction to trigger any
 # info to the output file.  So, as supported targets are added to gas 2.11,
diff --git a/gcc/configure.ac b/gcc/configure.ac
index d9fc3c2..d7ea224 100644
--- a/gcc/configure.ac
+++ b/gcc/configure.ac
@@ -5357,6 +5357,30 @@ case "$target" in
     ;;
 esac
 
+# This tests if the assembler supports two registers for global_load functions
+# (like in LLVM versions <12) or one register (like in LLVM 12).
+case "$target" in
+  amdgcn-* | gcn-*)
+    AC_MSG_CHECKING(assembler fix for global_load functions)
+    gcc_cv_as_global_load_fixed=yes
+    if test x$gcc_cv_as != x; then
+      cat > conftest.s <<EOF
+	global_store_dwordx2    v[[1:2]], v[[4:5]], s[[14:15]]
+EOF
+      if $gcc_cv_as -triple=amdgcn--amdhsa -filetype=obj -mcpu=gfx900 -o conftest.o conftest.s > /dev/null 2>&1; then
+        gcc_cv_as_global_load_fixed=no
+      fi
+      rm -f conftest.s conftest.o conftest
+    fi
+    if test x$gcc_cv_as_global_load_fixed = xyes; then
+      AC_DEFINE(HAVE_GCN_ASM_GLOBAL_LOAD_FIXED, 1, [Define if your assembler has fixed global_load functions.])
+    else
+      AC_DEFINE(HAVE_GCN_ASM_GLOBAL_LOAD_FIXED, 0, [Define if your assembler has fixed global_load functions.])
+    fi
+    AC_MSG_RESULT($gcc_cv_as_global_load_fixed)
+    ;;
+esac
+
 # ??? Not all targets support dwarf2 debug_line, even within a version
 # of gas.  Moreover, we need to emit a valid instruction to trigger any
 # info to the output file.  So, as supported targets are added to gas 2.11,


More information about the Gcc-patches mailing list