[PATCH] Fix float128-call.c test for power8 IEEE 128 and power10.

David Edelsohn dje.gcc@gmail.com
Fri Aug 27 16:47:35 GMT 2021


This patch is okay.

Thanks, David

On Fri, Aug 27, 2021 at 12:41 PM Bill Schmidt <wschmidt@linux.ibm.com> wrote:
>
> Hi Mike,
>
> Thanks for this clean-up!
>
> On 8/25/21 5:09 PM, Michael Meissner wrote:
> >  From 327273dfeec5c000f3c33ca7b88ee0097fd33586 Mon Sep 17 00:00:00 2001
> > From: Michael Meissner <meissner@linux.ibm.com>
> > Date: Wed, 25 Aug 2021 00:31:35 -0400
> > Subject: [PATCH] Fix float128-call.c test for power8 IEEE 128 and power10.
> >
> > I built a compiler on a little endian power8 system where the default long
> > double was IEEE 128-bit instead of IBM 128-bit.  I discovered that on
> > power8, we would generate a lxvd2x and xxpermdi to deal with the endianess
> > instead of the Altivec lxv.
> >
> > In addition, I noticed the constant that was being loaded (1.0q) could be
> > loaded by the lxvkq instruction.
> >
> > I rewrote the test to handle all forms of vector load and store that can
> > be generated.  And I changed the constant to be one that lxvkq does not
> > support.
> >
> > I did bootstrap tests on the following systems, and the the test ran in all
> > environments (each of the systems were configured for the cpu mentioned):
> >
> >     1)        Little endian power9  with IBM  128-bit long double
> >     2)        Little endian power9  with IEEE 128-bit long double
> >     3)        Little endian power8  with IBM  128-bit long double
> >     4)        Little endian power8  with IEEE 128-bit long double
> >     5)        Little endian power10 with IBM  128-bit long double
> >     6)        Little endian power10 with IEEE 128-bit long double
> >     7)        Big endian    power8  with IBM  128-bit long double
> >
> > Can I check this patch into the master branch and later backport it to GCC-11?
> >
> > 2021-08-25  Michael Meissner  <meissner@linux.ibm.com>
> >
> > gcc/testsuite/
> >       * gcc.target/powerpc/float128-call.c: Fix test for IEEE 128-bit
> >       long double and power10.
> > ---
> >   .../gcc.target/powerpc/float128-call.c        | 27 +++++++++++++------
> >   1 file changed, 19 insertions(+), 8 deletions(-)
> >
> > diff --git a/gcc/testsuite/gcc.target/powerpc/float128-call.c b/gcc/testsuite/gcc.target/powerpc/float128-call.c
> > index b64ffc68bfa..d1cf47e4298 100644
> > --- a/gcc/testsuite/gcc.target/powerpc/float128-call.c
> > +++ b/gcc/testsuite/gcc.target/powerpc/float128-call.c
> > @@ -6,22 +6,33 @@
> >   #error "-mfloat128 is not supported."
> >   #endif
> >
> > +/* Pick a constant to load that cannot be generated by the power10 lxvkq
> > +   instruction.  */
> >   #ifdef __LONG_DOUBLE_IEEE128__
> >   #define TYPE long double
> > -#define ONE  1.0L
> > +#define TEN  10.0L
> >
> >   #else
> >   #define TYPE __float128
> > -#define ONE  1.0Q
> > +#define TEN  10.0Q
> >   #endif
> >
> >   /* Test to make sure vector registers are used for passing IEEE 128-bit
> >      floating point values and returning them. Also make sure the 'q' suffix is
> > -   handled.  */
> > -TYPE one (void) { return ONE; }
> > +   handled for __float128.  */
> > +TYPE one (void) { return TEN; }
>
> This amuses me, and I want to keep it this way. :-)
> >   void store (TYPE a, TYPE *p) { *p = a; }
> >
> > -/* { dg-final { scan-assembler {\mlxvd2x 34\M} {target be} } } */
> > -/* { dg-final { scan-assembler {\mstxvd2x 34\M} {target be} } } */
> > -/* { dg-final { scan-assembler {\mlvx 2\M} {target le} } }  */
> > -/* { dg-final { scan-assembler {\mstvx 2\M} {target le} } } */
> > +/* This regexp captures the different vector load/stores that can be generated:
> > +
> > +     lxvd2x  -- big endian power7/power8, little endian power8
> > +     lvx     -- Altivec
> > +     lxv     -- power9
> > +     plxv    -- power10
> > +     lxvx    -- X-form variant.
> > +     stxvd2x -- big endian power7/power8, little endian power8
> > +     stvx    -- Altivec
>
> For symmetry, also mention stxvx as an X-form variant?
>
> Looks fine to me, recommend approval.
>
> Thanks,
> Bill
>
> > +     lxvx    -- power9/power10.  */
> > +
> > +/* { dg-final { scan-assembler {\mlxvd2x 34\M|\mlvx 2\M|\mp?lxvx? 34\M} } } */
> > +/* { dg-final { scan-assembler {\mstxvd2x 34\M|\mstvx 2\M|\mstxvx 34\M} } } */


More information about the Gcc-patches mailing list