[PATCH] diagnostics: Support for -finput-charset [PR93067]
Lewis Hyatt
lhyatt@gmail.com
Fri Dec 18 23:03:53 GMT 2020
Hello-
The attached patch addresses PR93067:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93067#c0
This is similar to the patch I posted last year on the PR, with some tweaks
to make it a little simpler. Recapping some of the commentary on the PR:
When source lines are needed for diagnostics output, they are retrieved from
the source file by the fcache infrastructure in input.c, since libcpp has
generally already forgotten them (plus not all front ends are using
libcpp). This infrastructure does not read the files in the same way as
libcpp does; in particular, it does not translate the encoding as requested
by -finput-charset, and it does not strip a UTF-8 byte-order mark if
present. The patch adds this ability. My thinking in deciding how to do it
was the following:
- Use of -finput-charset is rare, and use of UTF-8 BOMs must be rarer still,
so this patch should try hard not to introduce any worse performance
unless these things are needed.
- It is desirable to reuse libcpp's encoding infrastructure from charset.c
rather than repeat it in input.c. (Notably, libcpp uses iconv but it also
has hand-coded routines for certain charsets to make sure they are
available.)
- There is a performance degradation required in order to make use of libcpp
directly, because the input.c infrastructure only reads as much of the
source file as necessary, whereas libcpp interfaces as-is require to read
the entire file into memory.
- It can't be quite as simple as just "only delegate to libcpp if
-finput-charset was specified", because the stripping of the UTF-8 BOM has
to happen with or without this option.
- So it seemed a reasonable compromise to me, if -finput-charset is
specified, then use libcpp to convert the file, otherwise, strip the BOM
in input.c and then process the file the same way it is done now. There's
a little bit of leakage of charset logic from libcpp this way (for the
BOM), but it seems worthwhile, since otherwise, diagnostics would always
be reading the entire file into memory, which is not a cost paid
currently.
Separate from the main patch are two testcases that both fail before this
patch and pass after. I attached them gzipped because they use non-standard
encodings that won't email well.
The main question I have about the patch is whether I chose a good way to
address the following complication. location_get_source_line() in input.c is
used to generate diagnostics for all front ends, whether they use libcpp to
read the files or not. So input.c needs some way to know whether libcpp is
in use or not. I ended up adding a new function input_initialize_cpp_context(),
which front ends have to call if they are using libcpp to read their
files. Currently that is c-family and fortran. I don't see a simpler way
to do it at least... Even if there were a better way for input.c to find out
the value passed to -finput-charset, it would still need to know whether
libcpp is being used or not.
Please let me know if it looks OK (either now or for stage 1, whatever makes
sense...) bootstrap + regtest all languages on x86-64 GNU/Linux, all tests the
same before & after plus 6 new PASS from the new tests. Thanks!
-Lewis
-------------- next part --------------
Adds the logic to handle -finput-charset in layout_get_source_line(), so that
source lines are converted from their input encodings prior to being output by
diagnostics machinery.
gcc/c-family/ChangeLog:
PR other/93067
* c-opts.c (c_common_post_options): Call new function
input_initialize_cpp_context().
gcc/fortran/ChangeLog:
PR other/93067
* cpp.c (gfc_cpp_post_options): Call new function
input_initialize_cpp_context().
gcc/ChangeLog:
PR other/93067
* input.c (input_initialize_cpp_context): New function.
(read_data): Add prototype.
(add_file_to_cache_tab): Use libcpp to convert input encoding when
needed.
(class fcache): Add new members to track input encoding conversion
via libcpp.
(fcache::fcache): Adapt for new members.
(fcache::~fcache): Likewise.
(maybe_grow): Likewise.
(needs_read): Adapt to be aware that fp member may be NULL now.
(get_next_line): Likewise.
* input.h (struct cpp_reader): Forward declare for use...
(input_initialize_cpp_context): ...here. Declare new function.
libcpp/ChangeLog:
PR other/93067
* charset.c (init_iconv_desc): Adapt to permit PFILE argument to
be NULL.
(_cpp_convert_input): Likewise. Also move UTF-8 BOM logic to...
(cpp_check_utf8_bom): ...here. New function.
(cpp_input_conversion_is_trivial): New function.
* files.c (read_file_guts): Allow PFILE argument to be NULL. Add
INPUT_CHARSET argument as an alternate source of this information.
(cpp_get_converted_source): New function.
* include/cpplib.h (struct cpp_converted_source): Declare.
(cpp_get_converted_source): Declare.
(cpp_input_conversion_is_trivial): Declare.
(cpp_check_utf8_bom): Declare.
gcc/testsuite/ChangeLog:
PR other/93067
* gcc.dg/diagnostic-input-charset-1.c: New test.
* gcc.dg/diagnostic-input-charset-2.c: New test.
diff --git a/gcc/c-family/c-opts.c b/gcc/c-family/c-opts.c
index 59cabd12407..d5aa7859cc1 100644
--- a/gcc/c-family/c-opts.c
+++ b/gcc/c-family/c-opts.c
@@ -1124,6 +1124,10 @@ c_common_post_options (const char **pfilename)
cpp_post_options (parse_in);
init_global_opts_from_cpp (&global_options, cpp_get_options (parse_in));
+ /* Let diagnostics infrastructure know we are using libcpp to read
+ the input. */
+ input_initialize_cpp_context (parse_in);
+
input_location = UNKNOWN_LOCATION;
*pfilename = this_input_filename
diff --git a/gcc/fortran/cpp.c b/gcc/fortran/cpp.c
index 51baf141711..2b12a98afc0 100644
--- a/gcc/fortran/cpp.c
+++ b/gcc/fortran/cpp.c
@@ -493,6 +493,10 @@ gfc_cpp_post_options (void)
cpp_post_options (cpp_in);
+ /* Let diagnostics infrastructure know we are using libcpp to read
+ the input. */
+ input_initialize_cpp_context (cpp_in);
+
gfc_cpp_register_include_paths ();
}
diff --git a/gcc/input.c b/gcc/input.c
index 29d10f06b86..1dcdd464bc1 100644
--- a/gcc/input.c
+++ b/gcc/input.c
@@ -30,6 +30,24 @@ along with GCC; see the file COPYING3. If not see
#define HAVE_ICONV 0
#endif
+/* If libcpp is being used to read the data, we need to note the configuration
+ so we can read files back in consistently in location_get_source_line(). */
+struct
+{
+ bool in_use;
+ bool conversion_is_trivial;
+ const char *charset;
+} static input_cpp_context;
+
+void input_initialize_cpp_context (cpp_reader *cpp)
+{
+ input_cpp_context.in_use = true;
+ const cpp_options *opts = cpp_get_options (cpp);
+ input_cpp_context.charset = opts->input_charset;
+ input_cpp_context.conversion_is_trivial
+ = cpp_input_conversion_is_trivial (input_cpp_context.charset);
+}
+
/* This is a cache used by get_next_line to store the content of a
file to be searched for file lines. */
class fcache
@@ -78,6 +96,10 @@ public:
far. */
char *data;
+ /* The allocated buffer to be freed may start a little earlier than DATA,
+ e.g. if a UTF8 BOM was skipped at the beginning. */
+ int alloc_offset;
+
/* The size of the DATA array above.*/
size_t size;
@@ -118,6 +140,17 @@ public:
fcache ();
~fcache ();
+
+ void offset_buffer (int offset)
+ {
+ gcc_assert (offset < 0 ? alloc_offset + offset >= 0
+ : (size_t) offset <= size);
+ gcc_assert (data);
+ alloc_offset += offset;
+ data += offset;
+ size -= offset;
+ }
+
};
/* Current position in real source file. */
@@ -364,6 +397,9 @@ evicted_cache_tab_entry (unsigned *highest_use_count)
return to_evict;
}
+static bool
+read_data (fcache *c);
+
/* Create the cache used for the content of a given file to be
accessed by caret diagnostic. This cache is added to an array of
cache and can be retrieved by lookup_file_in_cache_tab. This
@@ -384,6 +420,8 @@ add_file_to_cache_tab (const char *file_path)
if (r->fp)
fclose (r->fp);
r->fp = fp;
+ if (r->alloc_offset)
+ r->offset_buffer (-r->alloc_offset);
r->nb_read = 0;
r->line_start_idx = 0;
r->line_num = 0;
@@ -394,6 +432,42 @@ add_file_to_cache_tab (const char *file_path)
r->total_lines = total_lines_num (file_path);
r->missing_trailing_newline = true;
+ /* If libcpp is managing the reading, then there are two cases we need to
+ consider. If -finput-charset is not in effect, then we just need to
+ strip a UTF-8 BOM, so do that ourselves rather than calling into libcpp so
+ as to avoid paying the penalty of using libcpp, namely that the entire file
+ must be read at once. In the (generally rare) case that a non-trivial
+ -finput-charset is needed, then go ahead and use libcpp to read the whole
+ file and do the conversion. */
+ if (input_cpp_context.in_use)
+ {
+ if (input_cpp_context.conversion_is_trivial)
+ {
+ /* Strip the UTF8 BOM if present. */
+ if (read_data (r))
+ {
+ const int offset = cpp_check_utf8_bom (r->data, r->nb_read);
+ r->offset_buffer (offset);
+ r->nb_read -= offset;
+ }
+ }
+ else
+ {
+ /* Need a full-blown conversion of the input charset. */
+ fclose (r->fp);
+ r->fp = NULL;
+ const cpp_converted_source cs
+ = cpp_get_converted_source (file_path, input_cpp_context.charset);
+ if (!cs.data)
+ return NULL;
+ if (r->data)
+ XDELETEVEC (r->data);
+ r->data = cs.data;
+ r->nb_read = r->size = cs.len;
+ r->alloc_offset = cs.data - cs.to_free;
+ }
+ }
+
return r;
}
@@ -415,7 +489,7 @@ lookup_or_add_file_to_cache_tab (const char *file_path)
diagnostic. */
fcache::fcache ()
-: use_count (0), file_path (NULL), fp (NULL), data (0),
+: use_count (0), file_path (NULL), fp (NULL), data (0), alloc_offset (0),
size (0), nb_read (0), line_start_idx (0), line_num (0),
total_lines (0), missing_trailing_newline (true)
{
@@ -433,6 +507,7 @@ fcache::~fcache ()
}
if (data)
{
+ offset_buffer (-alloc_offset);
XDELETEVEC (data);
data = 0;
}
@@ -447,9 +522,9 @@ fcache::~fcache ()
static bool
needs_read (fcache *c)
{
- return (c->nb_read == 0
- || c->nb_read == c->size
- || (c->line_start_idx >= c->nb_read - 1));
+ return c->fp && (c->nb_read == 0
+ || c->nb_read == c->size
+ || (c->line_start_idx >= c->nb_read - 1));
}
/* Return TRUE iff the cache is full and thus needs to be
@@ -469,9 +544,20 @@ maybe_grow (fcache *c)
if (!needs_grow (c))
return;
- size_t size = c->size == 0 ? fcache_buffer_size : c->size * 2;
- c->data = XRESIZEVEC (char, c->data, size);
- c->size = size;
+ if (!c->data)
+ {
+ gcc_assert (c->size == 0 && c->alloc_offset == 0);
+ c->size = fcache_buffer_size;
+ c->data = XNEWVEC (char, c->size);
+ }
+ else
+ {
+ const int offset = c->alloc_offset;
+ c->offset_buffer (-offset);
+ c->size *= 2;
+ c->data = XRESIZEVEC (char, c->data, c->size);
+ c->offset_buffer (offset);
+ }
}
/* Read more data into the cache. Extends the cache if need be.
@@ -570,7 +656,7 @@ get_next_line (fcache *c, char **line, ssize_t *line_len)
c->missing_trailing_newline = false;
}
- if (ferror (c->fp))
+ if (c->fp && ferror (c->fp))
return false;
/* At this point, we've found the end of the of line. It either
diff --git a/gcc/input.h b/gcc/input.h
index 4790a571c6a..0f1c6dc1f27 100644
--- a/gcc/input.h
+++ b/gcc/input.h
@@ -214,4 +214,10 @@ class GTY(()) string_concat_db
hash_map <location_hash, string_concat *> *m_table;
};
+/* Because we may read files a 2nd time, after libcpp does, in order to emit
+ diagnostics, we need to be aware if libcpp is being used and how it has
+ been configured, e.g., to know the value of -finput-charset. This function
+ needs to be called by any frontend that is using libcpp to read its data. */
+struct cpp_reader;
+void input_initialize_cpp_context (cpp_reader *cpp);
#endif
diff --git a/libcpp/charset.c b/libcpp/charset.c
index 3e5578b1390..d6e4e096d33 100644
--- a/libcpp/charset.c
+++ b/libcpp/charset.c
@@ -630,7 +630,11 @@ static const struct cpp_conversion conversion_tab[] = {
cset_converter structure for conversion from FROM to TO. If
iconv_open() fails, issue an error and return an identity
converter. Silently return an identity converter if FROM and TO
- are identical. */
+ are identical.
+
+ PFILE is only used for generating diagnostics; setting it to NULL
+ suppresses diagnostics. */
+
static struct cset_converter
init_iconv_desc (cpp_reader *pfile, const char *to, const char *from)
{
@@ -672,25 +676,31 @@ init_iconv_desc (cpp_reader *pfile, const char *to, const char *from)
if (ret.cd == (iconv_t) -1)
{
- if (errno == EINVAL)
- cpp_error (pfile, CPP_DL_ERROR, /* FIXME should be DL_SORRY */
- "conversion from %s to %s not supported by iconv",
- from, to);
- else
- cpp_errno (pfile, CPP_DL_ERROR, "iconv_open");
-
+ if (pfile)
+ {
+ if (errno == EINVAL)
+ cpp_error (pfile, CPP_DL_ERROR, /* FIXME should be DL_SORRY */
+ "conversion from %s to %s not supported by iconv",
+ from, to);
+ else
+ cpp_errno (pfile, CPP_DL_ERROR, "iconv_open");
+ }
ret.func = convert_no_conversion;
}
}
else
{
- cpp_error (pfile, CPP_DL_ERROR, /* FIXME: should be DL_SORRY */
- "no iconv implementation, cannot convert from %s to %s",
- from, to);
+ if (pfile)
+ {
+ cpp_error (pfile, CPP_DL_ERROR, /* FIXME: should be DL_SORRY */
+ "no iconv implementation, cannot convert from %s to %s",
+ from, to);
+ }
ret.func = convert_no_conversion;
ret.cd = (iconv_t) -1;
ret.width = -1;
}
+
return ret;
}
@@ -2122,6 +2132,25 @@ _cpp_interpret_identifier (cpp_reader *pfile, const uchar *id, size_t len)
buf, bufp - buf, HT_ALLOC));
}
+
+/* Utility to strip a UTF-8 byte order marking from the beginning
+ of a buffer. Returns the number of bytes to skip, which currently
+ will be either 0 or 3. */
+int
+cpp_check_utf8_bom (const char *data, size_t data_length)
+{
+
+#if HOST_CHARSET == HOST_CHARSET_ASCII
+ const unsigned char *udata = (const unsigned char *) data;
+ if (data_length >= 3 && udata[0] == 0xef && udata[1] == 0xbb
+ && udata[2] == 0xbf)
+ return 3;
+#endif
+
+ return 0;
+}
+
+
/* Convert an input buffer (containing the complete contents of one
source file) from INPUT_CHARSET to the source character set. INPUT
points to the input buffer, SIZE is its allocated size, and LEN is
@@ -2135,7 +2164,11 @@ _cpp_interpret_identifier (cpp_reader *pfile, const uchar *id, size_t len)
INPUT is expected to have been allocated with xmalloc. This
function will either set *BUFFER_START to INPUT, or free it and set
*BUFFER_START to a pointer to another xmalloc-allocated block of
- memory. */
+ memory.
+
+ PFILE is only used to generate diagnostics; setting it to NULL suppresses
+ diagnostics, and causes a return of NULL if there was any error instead. */
+
uchar *
_cpp_convert_input (cpp_reader *pfile, const char *input_charset,
uchar *input, size_t size, size_t len,
@@ -2158,17 +2191,28 @@ _cpp_convert_input (cpp_reader *pfile, const char *input_charset,
to.text = XNEWVEC (uchar, to.asize);
to.len = 0;
- if (!APPLY_CONVERSION (input_cset, input, len, &to))
- cpp_error (pfile, CPP_DL_ERROR,
- "failure to convert %s to %s",
- CPP_OPTION (pfile, input_charset), SOURCE_CHARSET);
+ const bool ok = APPLY_CONVERSION (input_cset, input, len, &to);
- free (input);
- }
+ /* Clean up the mess. */
+ if (input_cset.func == convert_using_iconv)
+ iconv_close (input_cset.cd);
- /* Clean up the mess. */
- if (input_cset.func == convert_using_iconv)
- iconv_close (input_cset.cd);
+ /* Handle conversion failure. */
+ if (!ok)
+ {
+ free (input);
+ if (!pfile)
+ {
+ XDELETEVEC (to.text);
+ *buffer_start = NULL;
+ *st_size = 0;
+ return NULL;
+ }
+ cpp_error (pfile, CPP_DL_ERROR,
+ "failure to convert %s to %s",
+ CPP_OPTION (pfile, input_charset), SOURCE_CHARSET);
+ }
+ }
/* Resize buffer if we allocated substantially too much, or if we
haven't enough space for the \n-terminator or following
@@ -2192,19 +2236,14 @@ _cpp_convert_input (cpp_reader *pfile, const char *input_charset,
buffer = to.text;
*st_size = to.len;
-#if HOST_CHARSET == HOST_CHARSET_ASCII
- /* The HOST_CHARSET test just above ensures that the source charset
- is UTF-8. So, ignore a UTF-8 BOM if we see one. Note that
- glib'c UTF-8 iconv() provider (as of glibc 2.7) does not ignore a
+
+ /* Ignore a UTF-8 BOM if we see one and the source charset is UTF-8. Note
+ that glib'c UTF-8 iconv() provider (as of glibc 2.7) does not ignore a
BOM -- however, even if it did, we would still need this code due
to the 'convert_no_conversion' case. */
- if (to.len >= 3 && to.text[0] == 0xef && to.text[1] == 0xbb
- && to.text[2] == 0xbf)
- {
- *st_size -= 3;
- buffer += 3;
- }
-#endif
+ const int bom_len = cpp_check_utf8_bom ((const char *) to.text, to.len);
+ *st_size -= bom_len;
+ buffer += bom_len;
*buffer_start = to.text;
return buffer;
@@ -2244,6 +2283,13 @@ _cpp_default_encoding (void)
return current_encoding;
}
+/* Check if the configured input charset requires no conversion, other than
+ possibly stripping a UTF-8 BOM. */
+bool cpp_input_conversion_is_trivial (const char *input_charset)
+{
+ return !strcasecmp (input_charset, SOURCE_CHARSET);
+}
+
/* Implementation of class cpp_string_location_reader. */
/* Constructor for cpp_string_location_reader. */
diff --git a/libcpp/files.c b/libcpp/files.c
index 301b2379a23..178bb9ed1e6 100644
--- a/libcpp/files.c
+++ b/libcpp/files.c
@@ -173,7 +173,7 @@ static bool pch_open_file (cpp_reader *pfile, _cpp_file *file,
static bool find_file_in_dir (cpp_reader *pfile, _cpp_file *file,
bool *invalid_pch, location_t loc);
static bool read_file_guts (cpp_reader *pfile, _cpp_file *file,
- location_t loc);
+ location_t loc, const char *input_charset = NULL);
static bool read_file (cpp_reader *pfile, _cpp_file *file,
location_t loc);
static struct cpp_dir *search_path_head (cpp_reader *, const char *fname,
@@ -671,18 +671,32 @@ _cpp_find_file (cpp_reader *pfile, const char *fname, cpp_dir *start_dir,
Use LOC for any diagnostics.
+ The input charset may be specified in the INPUT_CHARSET argument, or
+ else it will be taken from PFILE.
+
+ PFILE may be NULL. In this case, no diagnostics are issued, and the
+ input charset must be specified in the arguments.
+
FIXME: Flush file cache and try again if we run out of memory. */
static bool
-read_file_guts (cpp_reader *pfile, _cpp_file *file, location_t loc)
+read_file_guts (cpp_reader *pfile, _cpp_file *file, location_t loc,
+ const char *input_charset)
{
ssize_t size, total, count;
uchar *buf;
bool regular;
+ if (!input_charset)
+ {
+ gcc_assert (pfile);
+ input_charset = CPP_OPTION (pfile, input_charset);
+ }
+
if (S_ISBLK (file->st.st_mode))
{
- cpp_error_at (pfile, CPP_DL_ERROR, loc,
- "%s is a block device", file->path);
+ if (pfile)
+ cpp_error_at (pfile, CPP_DL_ERROR, loc,
+ "%s is a block device", file->path);
return false;
}
@@ -699,8 +713,9 @@ read_file_guts (cpp_reader *pfile, _cpp_file *file, location_t loc)
does not bite us. */
if (file->st.st_size > INTTYPE_MAXIMUM (ssize_t))
{
- cpp_error_at (pfile, CPP_DL_ERROR, loc,
- "%s is too large", file->path);
+ if (pfile)
+ cpp_error_at (pfile, CPP_DL_ERROR, loc,
+ "%s is too large", file->path);
return false;
}
@@ -733,29 +748,29 @@ read_file_guts (cpp_reader *pfile, _cpp_file *file, location_t loc)
if (count < 0)
{
- cpp_errno_filename (pfile, CPP_DL_ERROR, file->path, loc);
+ if (pfile)
+ cpp_errno_filename (pfile, CPP_DL_ERROR, file->path, loc);
free (buf);
return false;
}
- if (regular && total != size && STAT_SIZE_RELIABLE (file->st))
+ if (pfile && regular && total != size && STAT_SIZE_RELIABLE (file->st))
cpp_error_at (pfile, CPP_DL_WARNING, loc,
"%s is shorter than expected", file->path);
file->buffer = _cpp_convert_input (pfile,
- CPP_OPTION (pfile, input_charset),
+ input_charset,
buf, size + 16, total,
&file->buffer_start,
&file->st.st_size);
- file->buffer_valid = true;
-
- return true;
+ file->buffer_valid = file->buffer;
+ return file->buffer_valid;
}
/* Convenience wrapper around read_file_guts that opens the file if
necessary and closes the file descriptor after reading. FILE must
have been passed through find_file() at some stage. Use LOC for
- any diagnostics. */
+ any diagnostics. Unlike read_file_guts(), PFILE may not be NULL. */
static bool
read_file (cpp_reader *pfile, _cpp_file *file, location_t loc)
{
@@ -2118,3 +2133,25 @@ _cpp_has_header (cpp_reader *pfile, const char *fname, int angle_brackets,
return file->err_no != ENOENT;
}
+/* Read a file and convert to input charset, the same as if it were being read
+ by a cpp_reader. */
+
+cpp_converted_source
+cpp_get_converted_source (const char *fname, const char *input_charset)
+{
+ cpp_converted_source res = {};
+ _cpp_file file = {};
+ file.fd = -1;
+ file.name = lbasename (fname);
+ file.path = fname;
+ if (!open_file (&file))
+ return res;
+ const bool ok = read_file_guts (NULL, &file, 0, input_charset);
+ close (file.fd);
+ if (!ok)
+ return res;
+ res.to_free = (char *) file.buffer_start;
+ res.data = (char *) file.buffer;
+ res.len = file.st.st_size;
+ return res;
+}
diff --git a/libcpp/include/cpplib.h b/libcpp/include/cpplib.h
index 50d28dc9d5a..d38dd040367 100644
--- a/libcpp/include/cpplib.h
+++ b/libcpp/include/cpplib.h
@@ -1368,6 +1368,20 @@ extern struct _cpp_file *cpp_get_file (cpp_buffer *);
extern cpp_buffer *cpp_get_prev (cpp_buffer *);
extern void cpp_clear_file_cache (cpp_reader *);
+/* cpp_get_converted_source returns the contents of the given file, as it exists
+ after cpplib has read it and converted it from the input charset to the
+ source charset. Return struct will be zero-filled if the data could not be
+ read for any reason. The data starts at the DATA pointer, but the TO_FREE
+ pointer is what should be passed to free(), as there may be an offset. */
+struct cpp_converted_source
+{
+ char *to_free;
+ char *data;
+ size_t len;
+};
+cpp_converted_source cpp_get_converted_source (const char *fname,
+ const char *input_charset);
+
/* In pch.c */
struct save_macro_data;
extern int cpp_save_state (cpp_reader *, FILE *);
@@ -1438,6 +1452,7 @@ class cpp_display_width_computation {
/* Convenience functions that are simple use cases for class
cpp_display_width_computation. Tab characters will be expanded to spaces
as determined by TABSTOP. */
+
int cpp_byte_column_to_display_column (const char *data, int data_length,
int column, int tabstop);
inline int cpp_display_width (const char *data, int data_length,
@@ -1450,4 +1465,7 @@ int cpp_display_column_to_byte_column (const char *data, int data_length,
int display_col, int tabstop);
int cpp_wcwidth (cppchar_t c);
+bool cpp_input_conversion_is_trivial (const char *input_charset);
+int cpp_check_utf8_bom (const char *data, size_t data_length);
+
#endif /* ! LIBCPP_CPPLIB_H */
-------------- next part --------------
A non-text attachment was scrubbed...
Name: diagnostics-input-charset-part2.txt.gz
Type: application/x-gunzip
Size: 822 bytes
Desc: not available
URL: <https://gcc.gnu.org/pipermail/gcc-patches/attachments/20201218/576b486b/attachment-0001.bin>
More information about the Gcc-patches
mailing list