[PATCH] arm: Fix -mpure-code support/-mslow-flash-data for armv8-m.base [PR94538]
Ramana Radhakrishnan
ramana.gcc@googlemail.com
Thu Aug 27 09:02:33 GMT 2020
On Mon, Aug 24, 2020 at 4:35 PM Christophe Lyon
<christophe.lyon@linaro.org> wrote:
>
> On Mon, 24 Aug 2020 at 11:09, Christophe Lyon
> <christophe.lyon@linaro.org> wrote:
> >
> > On Sat, 22 Aug 2020 at 00:44, Ramana Radhakrishnan
> > <ramana.gcc@googlemail.com> wrote:
> > >
> > > On Wed, Aug 19, 2020 at 10:32 AM Christophe Lyon via Gcc-patches
> > > <gcc-patches@gcc.gnu.org> wrote:
> > > >
> > > > armv8-m.base (cortex-m23) has the movt instruction, so we need to
> > > > disable the define_split to generate a constant in this case,
> > > > otherwise we get incorrect insn constraints as described in PR94538.
> > > >
> > > > We also need to fix the pure-code alternative for thumb1_movsi_insn
> > > > because the assembler complains with instructions like
> > > > movs r0, #:upper8_15:1234
> > > > (Internal error in md_apply_fix)
> > > > We now generate movs r0, 4 instead.
> > > >
> > > > 2020-08-19 Christophe Lyon <christophe.lyon@linaro.org>
> > > > gcc/ChangeLog:
> > > >
> > > > * config/arm/thumb1.md: Disable set-constant splitter when
> > > > TARGET_HAVE_MOVT.
> > > > (thumb1_movsi_insn): Fix -mpure-code
> > > > alternative.
> > > >
> > > > gcc/testsuite/ChangeLog:
> > > >
> > > > * gcc.target/arm/pure-code/pr94538-1.c: New test.
> > > > * gcc.target/arm/pure-code/pr94538-2.c: New test.
> > >
> >
> > Hi Ramana,
> >
> > > I take it that this fixes the ICE rather than addressing the code
> > > generation / performance bits that Wilco was referring to ? Really the
> > > other code quality / performance issues listed in the PR should really
> > > be broken down into separate PRs while we take this as a fix for
> > > fixing the ICE,
> > >
> > > Under that assumption OK.
> > >
> >
> > Yes, that's correct, this patch just fixes the ICE, as it is cleaner
> > to handle perf issues in a different patch.
> >
>
> The patch applies cleanly to gcc-9 and gcc-10: OK to backport there?
Yes, all good.
Thanks,
Ramana
>
> (I tested that the offending testcase passes on the branches with the
> backport, and fails without).
>
> Thanks,
>
> Christophe
>
> > I'll open a new PR to track the perf issue.
> >
> > Thanks
> >
> >
> > > Ramana
> > >
> > > > ---
> > > > gcc/config/arm/thumb1.md | 66 ++++++++++++++++++----
> > > > gcc/testsuite/gcc.target/arm/pure-code/pr94538-1.c | 13 +++++
> > > > gcc/testsuite/gcc.target/arm/pure-code/pr94538-2.c | 12 ++++
> > > > 3 files changed, 79 insertions(+), 12 deletions(-)
> > > > create mode 100644 gcc/testsuite/gcc.target/arm/pure-code/pr94538-1.c
> > > > create mode 100644 gcc/testsuite/gcc.target/arm/pure-code/pr94538-2.c
> > > >
> > > > diff --git a/gcc/config/arm/thumb1.md b/gcc/config/arm/thumb1.md
> > > > index 0ff8190..f0129db 100644
> > > > --- a/gcc/config/arm/thumb1.md
> > > > +++ b/gcc/config/arm/thumb1.md
> > > > @@ -70,6 +70,7 @@ (define_split
> > > > "TARGET_THUMB1
> > > > && arm_disable_literal_pool
> > > > && GET_CODE (operands[1]) == CONST_INT
> > > > + && !TARGET_HAVE_MOVT
> > > > && !satisfies_constraint_I (operands[1])"
> > > > [(clobber (const_int 0))]
> > > > "
> > > > @@ -696,18 +697,59 @@ (define_insn "*thumb1_movsi_insn"
> > > > "TARGET_THUMB1
> > > > && ( register_operand (operands[0], SImode)
> > > > || register_operand (operands[1], SImode))"
> > > > - "@
> > > > - movs %0, %1
> > > > - movs %0, %1
> > > > - movw %0, %1
> > > > - #
> > > > - #
> > > > - ldmia\\t%1, {%0}
> > > > - stmia\\t%0, {%1}
> > > > - movs\\t%0, #:upper8_15:%1; lsls\\t%0, #8; adds\\t%0, #:upper0_7:%1; lsls\\t%0, #8; adds\\t%0, #:lower8_15:%1; lsls\\t%0, #8; adds\\t%0, #:lower0_7:%1
> > > > - ldr\\t%0, %1
> > > > - str\\t%1, %0
> > > > - mov\\t%0, %1"
> > > > +{
> > > > + switch (which_alternative)
> > > > + {
> > > > + default:
> > > > + case 0: return "movs\t%0, %1";
> > > > + case 1: return "movs\t%0, %1";
> > > > + case 2: return "movw\t%0, %1";
> > > > + case 3: return "#";
> > > > + case 4: return "#";
> > > > + case 5: return "ldmia\t%1, {%0}";
> > > > + case 6: return "stmia\t%0, {%1}";
> > > > + case 7:
> > > > + /* pure-code alternative: build the constant byte by byte,
> > > > + instead of loading it from a constant pool. */
> > > > + {
> > > > + int i;
> > > > + HOST_WIDE_INT op1 = INTVAL (operands[1]);
> > > > + bool mov_done_p = false;
> > > > + rtx ops[2];
> > > > + ops[0] = operands[0];
> > > > +
> > > > + /* Emit upper 3 bytes if needed. */
> > > > + for (i = 0; i < 3; i++)
> > > > + {
> > > > + int byte = (op1 >> (8 * (3 - i))) & 0xff;
> > > > +
> > > > + if (byte)
> > > > + {
> > > > + ops[1] = GEN_INT (byte);
> > > > + if (mov_done_p)
> > > > + output_asm_insn ("adds\t%0, %1", ops);
> > > > + else
> > > > + output_asm_insn ("movs\t%0, %1", ops);
> > > > + mov_done_p = true;
> > > > + }
> > > > +
> > > > + if (mov_done_p)
> > > > + output_asm_insn ("lsls\t%0, #8", ops);
> > > > + }
> > > > +
> > > > + /* Emit lower byte if needed. */
> > > > + ops[1] = GEN_INT (op1 & 0xff);
> > > > + if (!mov_done_p)
> > > > + output_asm_insn ("movs\t%0, %1", ops);
> > > > + else if (op1 & 0xff)
> > > > + output_asm_insn ("adds\t%0, %1", ops);
> > > > + return "";
> > > > + }
> > > > + case 8: return "ldr\t%0, %1";
> > > > + case 9: return "str\t%1, %0";
> > > > + case 10: return "mov\t%0, %1";
> > > > + }
> > > > +}
> > > > [(set_attr "length" "2,2,4,4,4,2,2,14,2,2,2")
> > > > (set_attr "type" "mov_reg,mov_imm,mov_imm,multiple,multiple,load_4,store_4,alu_sreg,load_4,store_4,mov_reg")
> > > > (set_attr "pool_range" "*,*,*,*,*,*,*, *,1018,*,*")
> > > > diff --git a/gcc/testsuite/gcc.target/arm/pure-code/pr94538-1.c b/gcc/testsuite/gcc.target/arm/pure-code/pr94538-1.c
> > > > new file mode 100644
> > > > index 0000000..31061d5
> > > > --- /dev/null
> > > > +++ b/gcc/testsuite/gcc.target/arm/pure-code/pr94538-1.c
> > > > @@ -0,0 +1,13 @@
> > > > +/* { dg-do compile } */
> > > > +/* { dg-skip-if "skip override" { *-*-* } { "-mfloat-abi=hard" } { "" } } */
> > > > +/* { dg-options "-mpure-code -mcpu=cortex-m23 -march=armv8-m.base -mthumb -mfloat-abi=soft" } */
> > > > +
> > > > +typedef int __attribute__ ((__vector_size__ (16))) V;
> > > > +
> > > > +V v;
> > > > +
> > > > +void
> > > > +foo (void)
> > > > +{
> > > > + v += (V){4095};
> > > > +}
> > > > diff --git a/gcc/testsuite/gcc.target/arm/pure-code/pr94538-2.c b/gcc/testsuite/gcc.target/arm/pure-code/pr94538-2.c
> > > > new file mode 100644
> > > > index 0000000..c1789da
> > > > --- /dev/null
> > > > +++ b/gcc/testsuite/gcc.target/arm/pure-code/pr94538-2.c
> > > > @@ -0,0 +1,12 @@
> > > > +/* { dg-do compile } */
> > > > +/* { dg-options "-mpure-code" } */
> > > > +
> > > > +typedef int __attribute__ ((__vector_size__ (16))) V;
> > > > +
> > > > +V v;
> > > > +
> > > > +void
> > > > +foo (void)
> > > > +{
> > > > + v += (V){4095};
> > > > +}
> > > > --
> > > > 2.7.4
> > > >
More information about the Gcc-patches
mailing list