[PATCH 4/4][PR target/88808]Enable bitwise operator for AVX512 masks.

Hongtao Liu crazylht@gmail.com
Fri Aug 21 16:46:23 GMT 2020


On Sat, Aug 22, 2020 at 12:36 AM H.J. Lu <hjl.tools@gmail.com> wrote:
>
> On Fri, Aug 21, 2020 at 9:29 AM Hongtao Liu <crazylht@gmail.com> wrote:
> >
> > On Fri, Aug 21, 2020 at 11:50 PM Uros Bizjak <ubizjak@gmail.com> wrote:
> > >
> > > On Fri, Aug 21, 2020 at 5:41 PM Hongtao Liu <crazylht@gmail.com> wrote:
> > > >
> > > > On Fri, Aug 21, 2020 at 9:15 PM Uros Bizjak <ubizjak@gmail.com> wrote:
> > > > >
> > > > > > > > gcc/
> > > > > > > >         PR target/88808
> > > > > > > >         * config/i386/i386.c (ix86_preferred_reload_class): Allow
> > > > > > > >         QImode data go into mask registers.
> > > > > > > >         * config/i386/i386.md: (*movhi_internal): Adjust constraints
> > > > > > > >         for mask registers.
> > > > > > > >         (*movqi_internal): Ditto.
> > > > > > > >         (*anddi_1): Support mask register operations
> > > > > > > >         (*and<mode>_1): Ditto.
> > > > > > > >         (*andqi_1): Ditto.
> > > > > > > >         (*andn<mode>_1): Ditto.
> > > > > > > >         (*<code><mode>_1): Ditto.
> > > > > > > >         (*<code>qi_1): Ditto.
> > > > > > > >         (*one_cmpl<mode>2_1): Ditto.
> > > > > > > >         (*one_cmplsi2_1_zext): Ditto.
> > > > > > > >         (*one_cmplqi2_1): Ditto.
> > > > > > > >         (define_peephole2): Move constant 0/-1 directly into mask
> > > > > > > >         registers.
> > > > > > > >         * config/i386/predicates.md (mask_reg_operand): New predicate.
> > > > > > > >         * config/i386/sse.md (define_split): Add post-reload splitters
> > > > > > > >         that would convert "generic" patterns to mask patterns.
> > > > > > > >         (*knotsi_1_zext): New define_insn.
> > > > > > > >
> > > > > > > > gcc/testsuite/
> > > > > > > >         * gcc.target/i386/bitwise_mask_op-1.c: New test.
> > > > > > > >         * gcc.target/i386/bitwise_mask_op-2.c: New test.
> > > > > > > >         * gcc.target/i386/bitwise_mask_op-3.c: New test.
> > > > > > > >         * gcc.target/i386/avx512bw-pr88465.c: New testcase.
> > > > > > > >         * gcc.target/i386/avx512bw-kunpckwd-1.c: Adjust testcase.
> > > > > > > >         * gcc.target/i386/avx512bw-kunpckwd-3.c: Ditto.
> > > > > > > >         * gcc.target/i386/avx512dq-kmovb-5.c: Ditto.
> > > > > > > >         * gcc.target/i386/avx512f-kmovw-5.c: Ditto.
> > > > > > >
> > > > > > > A little nit, please put new splitters after the instruction pattern.
> > > > > > >
> > > > > > > OK for the whole patch set with the above change,
> > > > > > >
> > > > > >
> > > > > > Yes, thanks for the review.
> > > > >
> > > > > Please note that your patch introduces several testsuite fails with -m32:
> > > > >
> > > > > gcc -O2 -mavx512bitalg -mavx512bw -m32 -g avx512bitalg-vpopcntb-1.c
> > > > >
> > > >
> > > > I can't reproduce this failure.
> > >
> > > Because you are running it on AVX512 enabled target.
> > >
> > > > > Program received signal SIGILL, Illegal instruction.
> > > > > 0x080490ac in __get_cpuid_count (__edx=<synthetic pointer>,
> > > > > __ecx=<synthetic pointer>, __ebx=<synthetic pointer>, __eax=<synthetic
> > > > > pointer>,
> > > > >     __subleaf=0, __leaf=7) at /hdd/uros/gcc-build-fast/gcc/include/cpuid.h:316
> > > > > 316       __cpuid_count (__leaf, __subleaf, *__eax, *__ebx, *__ecx, *__edx);
> > > > >
> > > > >    0x080490a3 <+51>:    cpuid
> > > > >    0x080490a5 <+53>:    mov    $0x1,%eax
> > > > >    0x080490aa <+58>:    mov    %ecx,%esi
> > > > > => 0x080490ac <+60>:    kmovd  %ebx,%k0
> > > > >    0x080490b0 <+64>:    mov    %edi,%ecx
> > > > >    0x080490b2 <+66>:    mov    %edi,%ebx
> > > > >
> > > > > kmov insn is generated for __cpuid_count function, where the binary
> > > > > determines, if the new instructions are supported. The binary will
> > > > > crash in the detection code if the processor lacks AVX512
> > > > > instructions.
> > > > >
> > > >
> > > > IMHO, the testcase shouldn't be run on processors without AVX512BW.
> > >
> > > No, it could run, because it checks for AVX512BW at runtime.
> > >
> >
> > Got it.
> >
> > > > Because in  avx512bitalg-vpopcntb-1.c, there's /*
> > > > dg-require-effective-target avx512bw } */.
> > >
> > > This is to check the toolchain for support.
> > >
> > > > what's the version of your assembler?
> > >
> > > GNU assembler version 2.34-4.fc32
> > >
> >
> > If assembler supports avx512bw, but processor not, the test would pass
> > condition `dg-require-effective-target avx512bw` and be runned.
> > then crashed for illegal instruction.
> >
> > > Please add something like
> > > X86_TUNE_INTER_UNIT_MOVES_FROM_MASK/X86_TUNE_INTER_UNIT_MOVES_TO_MASK
> > > and enable them only for m_CORE_AVX512 (or perhaps m_INTEL).
> > >
> > > Handle this in inline_secondary_memory_needed to reject direct moves
> > > for all other targets. This should disable direct moves for generic
> > > targets.
> > >
> >
> > Yes, I'll add it.
> >
>
>
> (define_insn "*movsi_internal"
>   [(set (match_operand:SI 0 "nonimmediate_operand"
>     "=r,m ,*y,*y,?*y,?m,?r,?*y,*v,*v,*v,m ,?r,?*v,*k,*k ,*rm,*k")
>         (match_operand:SI 1 "general_operand"
>     "g ,re,C ,*y,m  ,*y,*y,r  ,C ,*v,m ,*v,*v,r  ,*r,*km,*k ,CBC"))]
>   "!(MEM_P (operands[0]) && MEM_P (operands[1]))"
> ...
>  [(set (attr "isa")
>      (cond [(eq_attr "alternative" "12,13")
>               (const_string "sse2")
>            ]
>            (const_string "*")))
>
> is wrong.   mask register alternatives should be marked with avx512f.
> Please fix it.   Other integer move patterns may have the same issue.
> Once these are fixed,
>

It is restricted by ix86_hard_regno_mode_ok
---
18976      return ((TARGET_AVX512F && VALID_MASK_REG_MODE (mode))
18977              || (TARGET_AVX512BW
18978                  && VALID_MASK_AVX512BW_MODE (mode)));
18979    }
---

> diff --git a/gcc/testsuite/gcc.target/i386/avx512-check.h
> b/gcc/testsuite/gcc.target/i386/avx512-check.h
> index 0a377dba1d5..576e9b390c6 100644
> --- a/gcc/testsuite/gcc.target/i386/avx512-check.h
> +++ b/gcc/testsuite/gcc.target/i386/avx512-check.h
> @@ -25,6 +25,7 @@ do_test (void)
>  }
>  #endif
>
> +__attribute__((target ("no-avx512f")))
>  static int
>  check_osxsave (void)
>  {
> @@ -34,6 +35,7 @@ check_osxsave (void)
>    return (ecx & bit_OSXSAVE) != 0;
>  }
>
> +__attribute__((target ("no-avx512f")))
>  int
>  main ()
>  {
>
> should work.
>

That's what i thought right now.
The real problem is we use -mavx512bw to build a binary to determine
whether the processor support AVX512BW

> --
> H.J.



-- 
BR,
Hongtao


More information about the Gcc-patches mailing list