[PATCH v2] [SPARC] Add -mfsmuld option
Sebastian Huber
sebastian.huber@embedded-brains.de
Wed Jul 26 08:53:00 GMT 2017
Add the -mfsmuld option to control the generation of the FsMULd
instruction. In general, this instruction is available in architecture
version V8 and V9 CPUs with FPU. Some CPUs of this category do not
support this instruction properly, e.g. AT697E, AT697F and UT699. Some
CPUs of this category do not implement it in hardware, e.g. LEON3/4 with
GRFPU-lite.
gcc/
* config/sparc/sparc.c (dump_target_flag_bits): Dump MASK_FSMULD.
(sparc_option_override): Honour MASK_FSMULD.
* config/sparc/sparc.h (MASK_FEATURES): Add MASK_FSMULD.
* config/sparc/sparc.md (muldf3_extend): Use TARGET_FSMULD.
* config/sparc/sparc.opt (mfsmuld): New option.
* doc/invoke.texi (mfsmuld): Document option.
---
gcc/config/sparc/sparc.c | 30 ++++++++++++++++++++----------
gcc/config/sparc/sparc.h | 3 ++-
gcc/config/sparc/sparc.md | 2 +-
gcc/config/sparc/sparc.opt | 4 ++++
gcc/doc/invoke.texi | 11 ++++++++++-
5 files changed, 37 insertions(+), 13 deletions(-)
diff --git a/gcc/config/sparc/sparc.c b/gcc/config/sparc/sparc.c
index 674a3823cb9..8eed2fc5621 100644
--- a/gcc/config/sparc/sparc.c
+++ b/gcc/config/sparc/sparc.c
@@ -1304,6 +1304,8 @@ dump_target_flag_bits (const int flags)
fprintf (stderr, "FLAT ");
if (flags & MASK_FMAF)
fprintf (stderr, "FMAF ");
+ if (flags & MASK_FSMULD)
+ fprintf (stderr, "FSMULD ");
if (flags & MASK_FPU)
fprintf (stderr, "FPU ");
if (flags & MASK_HARD_QUAD)
@@ -1403,24 +1405,24 @@ sparc_option_override (void)
const int disable;
const int enable;
} const cpu_table[] = {
- { "v7", MASK_ISA, 0 },
- { "cypress", MASK_ISA, 0 },
+ { "v7", MASK_ISA|MASK_FSMULD, 0 },
+ { "cypress", MASK_ISA|MASK_FSMULD, 0 },
{ "v8", MASK_ISA, MASK_V8 },
/* TI TMS390Z55 supersparc */
{ "supersparc", MASK_ISA, MASK_V8 },
{ "hypersparc", MASK_ISA, MASK_V8 },
- { "leon", MASK_ISA, MASK_V8|MASK_LEON },
+ { "leon", MASK_ISA|MASK_FSMULD, MASK_V8|MASK_LEON },
{ "leon3", MASK_ISA, MASK_V8|MASK_LEON3 },
- { "leon3v7", MASK_ISA, MASK_LEON3 },
- { "sparclite", MASK_ISA, MASK_SPARCLITE },
+ { "leon3v7", MASK_ISA|MASK_FSMULD, MASK_LEON3 },
+ { "sparclite", MASK_ISA|MASK_FSMULD, MASK_SPARCLITE },
/* The Fujitsu MB86930 is the original sparclite chip, with no FPU. */
{ "f930", MASK_ISA|MASK_FPU, MASK_SPARCLITE },
/* The Fujitsu MB86934 is the recent sparclite chip, with an FPU. */
- { "f934", MASK_ISA, MASK_SPARCLITE },
+ { "f934", MASK_ISA|MASK_FSMULD, MASK_SPARCLITE },
{ "sparclite86x", MASK_ISA|MASK_FPU, MASK_SPARCLITE },
- { "sparclet", MASK_ISA, MASK_SPARCLET },
+ { "sparclet", MASK_ISA|MASK_FSMULD, MASK_SPARCLET },
/* TEMIC sparclet */
- { "tsc701", MASK_ISA, MASK_SPARCLET },
+ { "tsc701", MASK_ISA|MASK_FSMULD, MASK_SPARCLET },
{ "v9", MASK_ISA, MASK_V9 },
/* UltraSPARC I, II, IIi */
{ "ultrasparc", MASK_ISA,
@@ -1511,6 +1513,11 @@ sparc_option_override (void)
target_flags |= MASK_LONG_DOUBLE_128;
}
+ /* Enable the FSMULD instruction by default if not explicitly configured by
+ the user. It may be later disabled by the CPU target flags or if
+ !TARGET_FPU. */
+ target_flags |= MASK_FSMULD & ~target_flags_explicit;
+
/* Code model selection. */
sparc_cmodel = SPARC_DEFAULT_CMODEL;
@@ -1603,11 +1610,11 @@ sparc_option_override (void)
if (TARGET_VIS4B)
target_flags |= MASK_VIS4 | MASK_VIS3 | MASK_VIS2 | MASK_VIS;
- /* Don't allow -mvis, -mvis2, -mvis3, -mvis4, -mvis4b and -mfmaf if
+ /* Don't allow -mvis, -mvis2, -mvis3, -mvis4, -mvis4b, -mfmaf and -mfsmuld if
FPU is disabled. */
if (! TARGET_FPU)
target_flags &= ~(MASK_VIS | MASK_VIS2 | MASK_VIS3 | MASK_VIS4
- | MASK_VIS4B | MASK_FMAF);
+ | MASK_VIS4B | MASK_FMAF | MASK_FSMULD);
/* -mvis assumes UltraSPARC+, so we are sure v9 instructions
are available; -m64 also implies v9. */
@@ -1641,6 +1648,9 @@ sparc_option_override (void)
if (sparc_fix_ut699 || sparc_fix_ut700 || sparc_fix_gr712rc)
sparc_fix_b2bst = 1;
+ if (sparc_fix_ut699)
+ target_flags &= ~MASK_FSMULD;
+
/* Supply a default value for align_functions. */
if (align_functions == 0)
{
diff --git a/gcc/config/sparc/sparc.h b/gcc/config/sparc/sparc.h
index d7c617e06c3..15a62179af5 100644
--- a/gcc/config/sparc/sparc.h
+++ b/gcc/config/sparc/sparc.h
@@ -438,7 +438,8 @@ extern enum cmodel sparc_cmodel;
/* Mask of all CPU feature flags. */
#define MASK_FEATURES \
(MASK_FPU + MASK_HARD_QUAD + MASK_VIS + MASK_VIS2 + MASK_VIS3 \
- + MASK_VIS4 + MASK_CBCOND + MASK_FMAF + MASK_POPC + MASK_SUBXC)
+ + MASK_VIS4 + MASK_CBCOND + MASK_FMAF + MASK_FSMULD \
+ + MASK_POPC + MASK_SUBXC)
/* TARGET_HARD_MUL: Use 32-bit hardware multiply instructions but not %y. */
#define TARGET_HARD_MUL \
diff --git a/gcc/config/sparc/sparc.md b/gcc/config/sparc/sparc.md
index b154003c54a..751bacdbcac 100644
--- a/gcc/config/sparc/sparc.md
+++ b/gcc/config/sparc/sparc.md
@@ -6121,7 +6121,7 @@ visl")
[(set (match_operand:DF 0 "register_operand" "=e")
(mult:DF (float_extend:DF (match_operand:SF 1 "register_operand" "f"))
(float_extend:DF (match_operand:SF 2 "register_operand" "f"))))]
- "(TARGET_V8 || TARGET_V9) && TARGET_FPU && !sparc_fix_ut699"
+ "TARGET_FSMULD"
"fsmuld\t%1, %2, %0"
[(set_attr "type" "fpmul")
(set_attr "fptype" "double")])
diff --git a/gcc/config/sparc/sparc.opt b/gcc/config/sparc/sparc.opt
index ae63d2018e3..22267f50e90 100644
--- a/gcc/config/sparc/sparc.opt
+++ b/gcc/config/sparc/sparc.opt
@@ -93,6 +93,10 @@ mfmaf
Target Report Mask(FMAF)
Use UltraSPARC Fused Multiply-Add extensions.
+mfsmuld
+Target Report Mask(FSMULD)
+Use Floating-point Multiply Single to Double (FsMULd) instruction.
+
mpopc
Target Report Mask(POPC)
Use UltraSPARC Population-Count instruction.
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index a6da37c8203..6e174c5b3ff 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -1124,7 +1124,7 @@ See RS/6000 and PowerPC Options.
-mv8plus -mno-v8plus -mvis -mno-vis @gol
-mvis2 -mno-vis2 -mvis3 -mno-vis3 @gol
-mvis4 -mno-vis4 -mvis4b -mno-vis4b @gol
--mcbcond -mno-cbcond -mfmaf -mno-fmaf @gol
+-mcbcond -mno-cbcond -mfmaf -mno-fmaf -mfsmuld -mno-fsmuld @gol
-mpopc -mno-popc -msubxc -mno-subxc @gol
-mfix-at697f -mfix-ut699 -mfix-ut700 -mfix-gr712rc @gol
-mlra -mno-lra}
@@ -24069,6 +24069,15 @@ Fused Multiply-Add Floating-point instructions. The default is @option{-mfmaf}
when targeting a CPU that supports such instructions, such as Niagara-3 and
later.
+@item -mfsmuld
+@itemx -mno-fsmuld
+@opindex mfsmuld
+@opindex mno-fsmuld
+With @option{-mfsmuld}, GCC generates code that takes advantage of the
+Floating-point Multiply Single to Double (FsMULd) instruction. The default is
+@option{-mfsmuld} when targeting a CPU supporting the architecture versions V8
+or V9 with FPU except @option{-mcpu=leon}.
+
@item -mpopc
@itemx -mno-popc
@opindex mpopc
--
2.12.3
More information about the Gcc-patches
mailing list