[PATCH, DOC]: lots of small fixes to GCC manuals
Ralf Wildenhues
Ralf.Wildenhues@gmx.de
Thu Feb 14 00:33:00 GMT 2008
For the copyright years, I looked at the corresponding ChangeLog
entries for nontrivial changes.
Tested 'cd gcc && make info pdf dvi html'. OK to apply?
Does this still count as obvious, despite its size?
Thanks,
Ralf
gcc/ChangeLog:
2008-02-14 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* doc/bugreport.texi: Update copyright years.
* doc/c-tree.texi: Likewise.
* doc/cfg.texi: Likewise.
* doc/cpp.texi: Likewise.
* doc/cppinternals.texi: Likewise.
* doc/fragments.texi: Likewise.
* doc/frontends.texi: Likewise.
* doc/gcc.texi: Likewise.
* doc/gty.texi: Likewise.
* doc/hostconfig.texi: Likewise.
* doc/implement-c.texi: Likewise.
* doc/libgcc.texi: Likewise.
* doc/loop.texi: Likewise.
* doc/makefile.texi: Likewise.
* doc/options.texi: Likewise.
* doc/passes.texi: Likewise.
* doc/rtl.texi: Likewise.
* doc/sourcebuild.texi: Likewise.
* doc/standards.texi: Likewise.
* doc/tree-ssa.texi: Likewise.
* doc/trouble.texi: Likewise.
* doc/c-tree.texi: Use @dots{} and @enddots{} where appropriate.
* doc/cfg.texi: Likewise.
* doc/extend.texi: Likewise.
* doc/gty.texi: Likewise.
* doc/invoke.texi: Likewise.
* doc/loop.texi: Likewise.
* doc/md.texi: Likewise.
* doc/passes.texi: Likewise.
* doc/rtl.texi: Likewise.
* doc/sourcebuild.texi: Likewise.
* doc/tm.texi: Likewise.
* doc/tree-ssa.texi: Likewise.
* doc/extend.texi: Use @: or add comma where appropriate.
* doc/invoke.texi: Likewise.
* doc/tm.texi: Likewise.
* doc/c-tree.texi: Use @. where appropriate.
* doc/extend.texi: Likewise.
* doc/install.texi: Likewise.
* doc/invoke.texi: Likewise.
* doc/loop.texi: Likewise.
* doc/makefile.texi: Likewise.
* doc/md.texi: Likewise.
* doc/passes.texi: Likewise.
* doc/standards.texi: Likewise.
* doc/tm.texi: Likewise.
-------------- next part --------------
gcc/ChangeLog:
2008-02-14 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* doc/c-tree.texi: Use `@.' where appropriate.
* doc/extend.texi: Likewise.
* doc/install.texi: Likewise.
* doc/invoke.texi: Likewise.
* doc/loop.texi: Likewise.
* doc/makefile.texi: Likewise.
* doc/md.texi: Likewise.
* doc/passes.texi: Likewise.
* doc/standards.texi: Likewise.
* doc/tm.texi: Likewise.
diff --git a/gcc/doc/c-tree.texi b/gcc/doc/c-tree.texi
index 8ca96ed..cde75dd 100644
--- a/gcc/doc/c-tree.texi
+++ b/gcc/doc/c-tree.texi
@@ -2813,7 +2813,7 @@ label the critical section.
@item OMP_RETURN
This does not represent any OpenMP directive, it is an artificial
-marker to indicate the end of the body of an OpenMP. It is used
+marker to indicate the end of the body of an OpenMP@. It is used
by the flow graph (@code{tree-cfg.c}) and OpenMP region
building code (@code{omp-low.c}).
diff --git a/gcc/doc/extend.texi b/gcc/doc/extend.texi
index b29e5b2..055dd26 100644
--- a/gcc/doc/extend.texi
+++ b/gcc/doc/extend.texi
@@ -2383,7 +2383,7 @@ from the USP register in the function prologue.
@item l1_text
@cindex @code{l1_text} function attribute
This attribute specifies a function to be placed into L1 Instruction
-SRAM. The function will be put into a specific section named @code{.l1.text}.
+SRAM@. The function will be put into a specific section named @code{.l1.text}.
With @option{-mfdpic}, function calls with a such function as the callee
or caller will use inlined PLT.
@@ -10961,7 +10961,7 @@ The Solaris target supports @code{#pragma redefine_extname}
Increase the minimum alignment of each @var{variable} to @var{alignment}.
This is the same as GCC's @code{aligned} attribute @pxref{Variable
Attributes}). Macro expansion occurs on the arguments to this pragma
-when compiling C and Objective-C. It does not currently occur when
+when compiling C and Objective-C@. It does not currently occur when
compiling C++, but this is a bug which may be fixed in a future
release.
@@ -11569,7 +11569,7 @@ causing an access. However, there is reason to believe that it is,
because otherwise certain simple expressions become undefined. However,
because it would surprise most programmers, G++ treats dereferencing a
pointer to volatile object of complete type when the value is unused as
-GCC would do for an equivalent type in C. When the object has incomplete
+GCC would do for an equivalent type in C@. When the object has incomplete
type, G++ issues a warning; if you wish to force an error, you must
force a conversion to rvalue with, for instance, a static cast.
diff --git a/gcc/doc/install.texi b/gcc/doc/install.texi
index 4cdc76d..8411f44 100644
--- a/gcc/doc/install.texi
+++ b/gcc/doc/install.texi
@@ -297,14 +297,14 @@ systems' @command{tar} programs will also work, only try GNU
@item GNU Multiple Precision Library (GMP) version 4.1 (or later)
-Necessary to build GCC. If you do not have it installed in your
+Necessary to build GCC@. If you do not have it installed in your
library search path, you will have to configure with the
@option{--with-gmp} configure option. See also
@option{--with-gmp-lib} and @option{--with-gmp-include}.
@item MPFR Library version 2.3.0 (or later)
-Necessary to build GCC. It can be downloaded from
+Necessary to build GCC@. It can be downloaded from
@uref{http://www.mpfr.org/}. The version of MPFR that is bundled with
GMP 4.1.x contains numerous bugs. Although GCC may appear to function
with the buggy versions of MPFR, there are a few bugs that will not be
@@ -2997,7 +2997,7 @@ or @samp{98}. Another way is to add an appropriate set of predefines
to @env{CC}. The description for the @option{munix=} option contains
a list of the predefines used with each standard.
-As of GCC 4.1, @env{DWARF2} exception handling is available on HP-UX.
+As of GCC 4.1, @env{DWARF2} exception handling is available on HP-UX@.
It is now the default. This exposed a bug in the handling of data
relocations in the GAS assembler. The handling of 64-bit data relocations
was seriously broken, affecting debugging and exception support on all
@@ -3635,7 +3635,7 @@ use traps on systems that support them.
Cross-compilers for the MIPS as target using the MIPS assembler
currently do not work, because the auxiliary programs
@file{mips-tdump.c} and @file{mips-tfile.c} can't be compiled on
-anything but a MIPS. It does work to cross compile for a MIPS
+anything but a MIPS@. It does work to cross compile for a MIPS
if you use the GNU assembler and linker.
The assembler from GNU binutils 2.17 and earlier has a bug in the way
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index 4be4c46..8d8d959 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -3810,7 +3810,7 @@ recommended form for most uses.
Unfortunately, there are some characters which ISO C and ISO C++ allow
in identifiers that when turned into NFC aren't allowable as
identifiers. That is, there's no way to use these symbols in portable
-ISO C or C++ and have all your identifiers in NFC.
+ISO C or C++ and have all your identifiers in NFC@.
@option{-Wnormalized=id} suppresses the warning for these characters.
It is hoped that future versions of the standards involved will correct
this, which is why this option is not the default.
@@ -4821,7 +4821,7 @@ Dump each function after CCP@. The file name is made by appending
@item storeccp
@opindex fdump-tree-storeccp
-Dump each function after STORE-CCP. The file name is made by appending
+Dump each function after STORE-CCP@. The file name is made by appending
@file{.storeccp} to the source file name.
@item pre
@@ -5253,7 +5253,7 @@ Disabled at levels @option{-O}, @option{-O2}, @option{-O3}, @option{-Os}.
@item -fforward-propagate
@opindex fforward-propagate
-Perform a forward propagation pass on RTL. The pass tries to combine two
+Perform a forward propagation pass on RTL@. The pass tries to combine two
instructions and checks if the result can be simplified. If loop unrolling
is active, two passes are performed and the second is scheduled after
loop unrolling.
@@ -5589,12 +5589,12 @@ higher on architectures that support this.
@item -fdce
@opindex fdce
-Perform dead code elimination (DCE) on RTL.
+Perform dead code elimination (DCE) on RTL@.
Enabled by default at @option{-O} and higher.
@item -fdse
@opindex fdse
-Perform dead store elimination (DSE) on RTL.
+Perform dead store elimination (DSE) on RTL@.
Enabled by default at @option{-O} and higher.
@item -fif-conversion
@@ -11175,7 +11175,7 @@ the M32C/80 series.
@opindex msim
Specifies that the program will be run on the simulator. This causes
an alternate runtime library to be linked in which supports, for
-example, file I/O. You must not use this option when generating
+example, file I/O@. You must not use this option when generating
programs that will run on real hardware; you must provide your own
runtime library for whatever I/O functions are needed.
@@ -11473,7 +11473,7 @@ CPU32 or CPU32+ core, including the 68330, 68331, 68332, 68333, 68334,
@item -m5200
@opindex m5200
-Generate output for a 520X ColdFire CPU. This is the default
+Generate output for a 520X ColdFire CPU@. This is the default
when the compiler is configured for 520X-based systems.
It is equivalent to @option{-mcpu=5206}, and is now deprecated
in favor of that option.
@@ -11483,7 +11483,7 @@ the MCF5202, MCF5203, MCF5204 and MCF5206.
@item -m5206e
@opindex m5206e
-Generate output for a 5206e ColdFire CPU. The option is now
+Generate output for a 5206e ColdFire CPU@. The option is now
deprecated in favor of the equivalent @option{-mcpu=5206e}.
@item -m528x
@@ -11494,12 +11494,12 @@ The option is now deprecated in favor of the equivalent
@item -m5307
@opindex m5307
-Generate output for a ColdFire 5307 CPU. The option is now deprecated
+Generate output for a ColdFire 5307 CPU@. The option is now deprecated
in favor of the equivalent @option{-mcpu=5307}.
@item -m5407
@opindex m5407
-Generate output for a ColdFire 5407 CPU. The option is now deprecated
+Generate output for a ColdFire 5407 CPU@. The option is now deprecated
in favor of the equivalent @option{-mcpu=5407}.
@item -mcfv4e
@@ -11532,7 +11532,7 @@ The option is equivalent to @option{-march=68020} @option{-mtune=68020-60}.
@opindex mhard-float
@opindex m68881
Generate floating-point instructions. This is the default for 68020
-and above, and for ColdFire devices that have an FPU. It defines the
+and above, and for ColdFire devices that have an FPU@. It defines the
macro @samp{__HAVE_68881__} on M680x0 targets and @samp{__mcffpu__}
on ColdFire targets.
@@ -12081,7 +12081,7 @@ configurations; see the installation documentation for details.
@itemx -mno-dsp
@opindex mdsp
@opindex mno-dsp
-Use (do not use) revision 1 of the MIPS DSP ASE.
+Use (do not use) revision 1 of the MIPS DSP ASE@.
@xref{MIPS DSP Built-in Functions}. This option defines the
preprocessor macro @samp{__mips_dsp}. It also defines
@samp{__mips_dsp_rev} to 1.
@@ -12090,7 +12090,7 @@ preprocessor macro @samp{__mips_dsp}. It also defines
@itemx -mno-dspr2
@opindex mdspr2
@opindex mno-dspr2
-Use (do not use) revision 2 of the MIPS DSP ASE.
+Use (do not use) revision 2 of the MIPS DSP ASE@.
@xref{MIPS DSP Built-in Functions}. This option defines the
preprocessor macros @samp{__mips_dsp} and @samp{__mips_dspr2}.
It also defines @samp{__mips_dsp_rev} to 2.
@@ -12168,7 +12168,7 @@ The default @option{-G} option depends on the configuration.
@opindex mlocal-sdata
@opindex mno-local-sdata
Extend (do not extend) the @option{-G} behavior to local data too,
-such as to static variables in C. @option{-mlocal-sdata} is the
+such as to static variables in C@. @option{-mlocal-sdata} is the
default for all configurations.
If the linker complains that an application is using too much small data,
@@ -13089,7 +13089,7 @@ implies @option{-mno-powerpc64}. GCC defaults to @option{-maix32}.
@opindex mxl-compat
@opindex mno-xl-compat
Produce code that conforms more closely to IBM XL compiler semantics
-when using AIX-compatible ABI. Pass floating-point arguments to
+when using AIX-compatible ABI@. Pass floating-point arguments to
prototyped functions beyond the register save area (RSA) on the stack
in addition to argument FPRs. Do not assume that most significant
double in 128-bit long double value is properly rounded when comparing
diff --git a/gcc/doc/loop.texi b/gcc/doc/loop.texi
index c904a87..e9eca7c 100644
--- a/gcc/doc/loop.texi
+++ b/gcc/doc/loop.texi
@@ -62,7 +62,7 @@ query membership of blocks to loops and subloop relationships, or
enumerate and test loop exits, can be expected to work).
Body of the loop is the set of blocks that are dominated by its header,
-and reachable from its latch against the direction of edges in CFG. The
+and reachable from its latch against the direction of edges in CFG@. The
loops are organized in a containment hierarchy (tree) such that all the
loops immediately contained inside loop L are the children of L in the
tree. This tree is represented by the @code{struct loops} structure.
@@ -93,7 +93,7 @@ were ended using break or goto, they would not be released;
Each basic block contains the reference to the innermost loop it belongs
to (@code{loop_father}). For this reason, it is only possible to have
one @code{struct loops} structure initialized at the same time for each
-CFG. The global variable @code{current_loops} contains the
+CFG@. The global variable @code{current_loops} contains the
@code{struct loops} structure. Many of the loop manipulation functions
assume that dominance information is up-to-date.
@@ -106,7 +106,7 @@ structures should be calculated/enforced and preserved later:
@item @code{LOOPS_MAY_HAVE_MULTIPLE_LATCHES}: If this flag is set, no
changes to CFG will be performed in the loop analysis, in particular,
loops with multiple latch edges will not be disambiguated. If a loop
-has multiple latches, its latch block is set to NULL. Most of
+has multiple latches, its latch block is set to NULL@. Most of
the loop manipulation functions will not work for loops in this shape.
No other flags that require CFG changes can be passed to
loop_optimizer_init.
@@ -240,7 +240,7 @@ are only reliable for the innermost loops:
@itemize
@item @code{create_iv}: Creates a new induction variable. Only works on
-GIMPLE. @code{standard_iv_increment_position} can be used to find a
+GIMPLE@. @code{standard_iv_increment_position} can be used to find a
suitable place for the iv increment.
@item @code{duplicate_loop_to_header_edge},
@code{tree_duplicate_loop_to_header_edge}: These functions (on RTL and
@@ -269,7 +269,7 @@ cannot be taken. Works only on GIMPLE.
Throughout the loop optimizations on tree level, one extra condition is
enforced on the SSA form: No SSA name is used outside of the loop in
that it is defined. The SSA form satisfying this condition is called
-``loop-closed SSA form'' -- LCSSA. To enforce LCSSA, PHI nodes must be
+``loop-closed SSA form'' -- LCSSA@. To enforce LCSSA, PHI nodes must be
created at the exits of the loops for the SSA names that are used
outside of them. Only the real operands (not virtual SSA names) are
held in LCSSA, in order to save memory.
@@ -308,7 +308,7 @@ LCSSA is preserved.
@cindex IV analysis on GIMPLE
Scalar evolutions (SCEV) are used to represent results of induction
-variable analysis on GIMPLE. They enable us to represent variables with
+variable analysis on GIMPLE@. They enable us to represent variables with
complicated behavior in a simple and consistent way (we only use it to
express values of polynomial induction variables, but it is possible to
extend it). The interfaces to SCEV analysis are declared in
@@ -436,7 +436,7 @@ the information is invalid.
@item @code{noloop_assumptions} on RTL, @code{may_be_zero} on GIMPLE: If
this condition is true, the loop exits in the first iteration.
@item @code{infinite}: If this condition is true, the loop is infinite.
-This condition is only available on RTL. On GIMPLE, conditions for
+This condition is only available on RTL@. On GIMPLE, conditions for
finiteness of the loop are included in @code{assumptions}.
@item @code{niter_expr} on RTL, @code{niter} on GIMPLE: The expression
that gives number of iterations. The number of iterations is defined as
@@ -453,7 +453,7 @@ structure. The corresponding function is named
@code{check_simple_exit}. There are also functions that pass through
all the exits of a loop and try to find one with easy to determine
number of iterations -- @code{find_loop_niter} on GIMPLE and
-@code{find_simple_exit} on RTL. Finally, there are functions that
+@code{find_simple_exit} on RTL@. Finally, there are functions that
provide the same information, but additionally cache it, so that
repeated calls to number of iterations are not so costly --
@code{number_of_latch_executions} on GIMPLE and @code{get_simple_loop_desc}
@@ -499,7 +499,7 @@ and mapping this order to the elements of this array avoids costly
queries to the loop body representation.
Three types of data references are currently handled: ARRAY_REF,
-INDIRECT_REF and COMPONENT_REF. The data structure for the data reference
+INDIRECT_REF and COMPONENT_REF@. The data structure for the data reference
is @code{data_reference}, where @code{data_reference_p} is a name of a
pointer to the data reference structure. The structure contains the
following elements:
diff --git a/gcc/doc/makefile.texi b/gcc/doc/makefile.texi
index 2afbeec..5dbe81e 100644
--- a/gcc/doc/makefile.texi
+++ b/gcc/doc/makefile.texi
@@ -152,7 +152,7 @@ with the stage@var{N-1} GCC@footnote{Customarily, the system compiler
is also termed the @file{stage0} GCC.}.
You will invoke this target if you need to test or debug the
-stage@var{N} GCC. If you only need to execute GCC (but you need
+stage@var{N} GCC@. If you only need to execute GCC (but you need
not run @samp{make} either to rebuild it or to run test suites),
you should be able to work directly in the @file{stage@var{N}-gcc}
directory. This makes it easier to debug multiple stages in
diff --git a/gcc/doc/md.texi b/gcc/doc/md.texi
index 540efd4..0744fc4 100644
--- a/gcc/doc/md.texi
+++ b/gcc/doc/md.texi
@@ -3663,7 +3663,7 @@ The output and input vectors should have the same modes.
@item @samp{vec_pack_trunc_@var{m}}
Narrow (demote) and merge the elements of two vectors. Operands 1 and 2
are vectors of the same mode having N integral or floating point elements
-of size S. Operand 0 is the resulting vector in which 2*N elements of
+of size S@. Operand 0 is the resulting vector in which 2*N elements of
size N/2 are concatenated after narrowing them down using truncation.
@cindex @code{vec_pack_ssat_@var{m}} instruction pattern
@@ -3680,7 +3680,7 @@ saturating arithmetic.
@item @samp{vec_pack_sfix_trunc_@var{m}}, @samp{vec_pack_ufix_trunc_@var{m}}
Narrow, convert to signed/unsigned integral type and merge the elements
of two vectors. Operands 1 and 2 are vectors of the same mode having N
-floating point elements of size S. Operand 0 is the resulting vector
+floating point elements of size S@. Operand 0 is the resulting vector
in which 2*N elements of size N/2 are concatenated.
@cindex @code{vec_unpacks_hi_@var{m}} instruction pattern
@@ -3688,7 +3688,7 @@ in which 2*N elements of size N/2 are concatenated.
@item @samp{vec_unpacks_hi_@var{m}}, @samp{vec_unpacks_lo_@var{m}}
Extract and widen (promote) the high/low part of a vector of signed
integral or floating point elements. The input vector (operand 1) has N
-elements of size S. Widen (promote) the high/low elements of the vector
+elements of size S@. Widen (promote) the high/low elements of the vector
using signed or floating point extension and place the resulting N/2
values of size 2*S in the output vector (operand 0).
@@ -3708,7 +3708,7 @@ place the resulting N/2 values of size 2*S in the output vector (operand 0).
@itemx @samp{vec_unpacku_float_hi_@var{m}}, @samp{vec_unpacku_float_lo_@var{m}}
Extract, convert to floating point type and widen the high/low part of a
vector of signed/unsigned integral elements. The input vector (operand 1)
-has N elements of size S. Convert the high/low elements of the vector using
+has N elements of size S@. Convert the high/low elements of the vector using
floating point conversion and place the resulting N/2 values of size 2*S in
the output vector (operand 0).
@@ -3719,7 +3719,7 @@ the output vector (operand 0).
@item @samp{vec_widen_umult_hi_@var{m}}, @samp{vec_widen_umult_lo_@var{m}}
@itemx @samp{vec_widen_smult_hi_@var{m}}, @samp{vec_widen_smult_lo_@var{m}}
Signed/Unsigned widening multiplication. The two inputs (operands 1 and 2)
-are vectors with N signed/unsigned elements of size S. Multiply the high/low
+are vectors with N signed/unsigned elements of size S@. Multiply the high/low
elements of the two vectors, and put the N/2 products of size 2*S in the
output vector (operand 0).
diff --git a/gcc/doc/passes.texi b/gcc/doc/passes.texi
index eab4537..b1505ec 100644
--- a/gcc/doc/passes.texi
+++ b/gcc/doc/passes.texi
@@ -558,7 +558,7 @@ If a function always returns the same local variable, and that local
variable is an aggregate type, then the variable is replaced with the
return value for the function (i.e., the function's DECL_RESULT). This
is equivalent to the C++ named return value optimization applied to
-GIMPLE. The pass is located in @file{tree-nrv.c} and is described by
+GIMPLE@. The pass is located in @file{tree-nrv.c} and is described by
@code{pass_nrv}.
@item Return slot optimization
diff --git a/gcc/doc/standards.texi b/gcc/doc/standards.texi
index 6b5e15b..bc1a102 100644
--- a/gcc/doc/standards.texi
+++ b/gcc/doc/standards.texi
@@ -177,7 +177,7 @@ warnings).
The ISO C++ committee is working on a new ISO C++ standard, dubbed
C++0x, that is intended to be published by 2009. C++0x contains several
changes to the C++ language, some of which have been implemented in an
-experimental C++0x mode in GCC. The C++0x mode in GCC tracks the draft
+experimental C++0x mode in GCC@. The C++0x mode in GCC tracks the draft
working paper for the C++0x standard; the latest working paper is
available on the ISO C++ committee's web site at
@uref{http://www.open-std.org/jtc1/sc22/wg21/}. For information
diff --git a/gcc/doc/tm.texi b/gcc/doc/tm.texi
index 74aa90c..54d6113 100644
--- a/gcc/doc/tm.texi
+++ b/gcc/doc/tm.texi
@@ -6350,7 +6350,7 @@ enabled/used. @var{flags} initially may have either the SCHED_RGN or SCHED_EBB
bit set. This denotes the scheduler pass for which the data should be
provided. The target backend should modify @var{flags} by modifying
the bits corresponding to the following features: USE_DEPS_LIST, USE_GLAT,
-DETACH_LIFE_INFO, and DO_SPECULATION. For the DO_SPECULATION feature
+DETACH_LIFE_INFO, and DO_SPECULATION@. For the DO_SPECULATION feature
an additional structure @var{spec_info} should be filled by the target.
The structure describes speculation types that can be used in the scheduler.
@end deftypefn
@@ -7151,7 +7151,7 @@ defining this macro. If unable, use the expression
before and after that, output the additional assembler syntax for defining
the name, and a newline.
-There are two ways of handling global BSS. One is to define either
+There are two ways of handling global BSS@. One is to define either
this macro or its aligned counterpart, @code{ASM_OUTPUT_ALIGNED_BSS}.
The other is to have @code{TARGET_ASM_SELECT_SECTION} return a
switchable BSS section (@pxref{TARGET_HAVE_SWITCHABLE_BSS_SECTIONS}).
@@ -10142,7 +10142,7 @@ may in turn cause a branch offset to overflow.
@deftypefn {Target Hook} bool TARGET_COMMUTATIVE_P (rtx @var{x}, @var{outer_code})
This target hook returns @code{true} if @var{x} is considered to be commutative.
Usually, this is just COMMUTATIVE_P (@var{x}), but the HP PA doesn't consider
-PLUS to be commutative inside a MEM. @var{outer_code} is the rtx code
+PLUS to be commutative inside a MEM@. @var{outer_code} is the rtx code
of the enclosing rtl, if known, otherwise it is UNKNOWN.
@end deftypefn
-------------- next part --------------
gcc/ChangeLog:
2008-02-14 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* doc/extend.texi: Use @: or add comma where appropriate.
* doc/invoke.texi: Likewise.
* doc/tm.texi: Likewise.
diff --git a/gcc/doc/extend.texi b/gcc/doc/extend.texi
index 055dd26..1d53a07 100644
--- a/gcc/doc/extend.texi
+++ b/gcc/doc/extend.texi
@@ -5649,7 +5649,7 @@ assert (__builtin_object_size (q, 1) == sizeof (var.b));
@end deftypefn
There are built-in functions added for many common string operation
-functions, e.g. for @code{memcpy} @code{__builtin___memcpy_chk}
+functions, e.g., for @code{memcpy} @code{__builtin___memcpy_chk}
built-in is provided. This built-in has an additional last argument,
which is the number of bytes remaining in object the @var{dest}
argument points to or @code{(size_t) -1} if the size is not known.
@@ -5702,7 +5702,7 @@ int __builtin___vsnprintf_chk (char *s, size_t maxlen, int flag, size_t os,
@end smallexample
The added @var{flag} argument is passed unchanged to @code{__sprintf_chk}
-etc. functions and can contain implementation specific flags on what
+etc.@: functions and can contain implementation specific flags on what
additional security measures the checking function might take, such as
handling @code{%n} differently.
@@ -5718,7 +5718,7 @@ In addition to this, there are checking built-in functions
@code{__builtin___fprintf_chk} and @code{__builtin___vfprintf_chk}.
These have just one additional argument, @var{flag}, right before
format string @var{fmt}. If the compiler is able to optimize them to
-@code{fputc} etc. functions, it will, otherwise the checking function
+@code{fputc} etc.@: functions, it will, otherwise the checking function
should be called and the @var{flag} argument passed to it.
@node Other Builtins
@@ -11067,7 +11067,7 @@ multiple @code{#pragma pack(@var{n})} instances and finalized by a single
@code{#pragma pack(pop)}.
@end enumerate
-Some targets, e.g. i386 and powerpc, support the @code{ms_struct}
+Some targets, e.g.@: i386 and powerpc, support the @code{ms_struct}
@code{#pragma} which lays out a structure as the documented
@code{__attribute__ ((ms_struct))}.
@enumerate
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index 8d8d959..2809812 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -1181,7 +1181,7 @@ switches supported by the compiler the following can be used:
The sense of a qualifier can be inverted by prefixing it with the
@var{^} character, so for example to display all binary warning
-options (i.e. ones that are either on or off and that do not take an
+options (i.e., ones that are either on or off and that do not take an
argument), which have a description the following can be used:
@smallexample
@@ -4920,16 +4920,16 @@ For @var{n}=0 no diagnostic information is reported.
If @var{n}=1 the vectorizer reports each loop that got vectorized,
and the total number of loops that got vectorized.
If @var{n}=2 the vectorizer also reports non-vectorized loops that passed
-the first analysis phase (vect_analyze_loop_form) - i.e. countable,
+the first analysis phase (vect_analyze_loop_form) - i.e.@: countable,
inner-most, single-bb, single-entry/exit loops. This is the same verbosity
level that @option{-fdump-tree-vect-stats} uses.
Higher verbosity levels mean either more information dumped for each
reported loop, or same amount of information reported for more loops:
If @var{n}=3, alignment related information is added to the reports.
-If @var{n}=4, data-references related information (e.g. memory dependences,
+If @var{n}=4, data-references related information (e.g.@: memory dependences,
memory access-patterns) is added to the reports.
If @var{n}=5, the vectorizer reports also non-vectorized inner-most loops
-that did not pass the first analysis phase (i.e. may not be countable, or
+that did not pass the first analysis phase (i.e., may not be countable, or
may have complicated control-flow).
If @var{n}=6, the vectorizer reports also non-vectorized nested loops.
For @var{n}=7, all the information the vectorizer generates during its
@@ -5936,7 +5936,7 @@ Parallelize loops, i.e., split their iteration space to run in n threads.
This is only possible for loops whose iterations are independent
and can be arbitrarily reordered. The optimization is only
profitable on multiprocessor machines, for loops that are CPU-intensive,
-rather than constrained e.g. by memory bandwidth. This option
+rather than constrained e.g.@: by memory bandwidth. This option
implies @option{-pthread}, and thus is only supported on targets
that have support for @option{-pthread}.
diff --git a/gcc/doc/tm.texi b/gcc/doc/tm.texi
index 54d6113..5207953 100644
--- a/gcc/doc/tm.texi
+++ b/gcc/doc/tm.texi
@@ -5483,7 +5483,7 @@ widening multiplication of the even elements of two input vectors of type @var{x
If this hook is defined, the autovectorizer will use it along with the
@code{TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_ODD} target hook when vectorizing
widening multiplication in cases that the order of the results does not have to be
-preserved (e.g. used only by a reduction computation). Otherwise, the
+preserved (e.g.@: used only by a reduction computation). Otherwise, the
@code{widen_mult_hi/lo} idioms will be used.
@end deftypefn
@@ -5494,7 +5494,7 @@ widening multiplication of the odd elements of two input vectors of type @var{x}
If this hook is defined, the autovectorizer will use it along with the
@code{TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_EVEN} target hook when vectorizing
widening multiplication in cases that the order of the results does not have to be
-preserved (e.g. used only by a reduction computation). Otherwise, the
+preserved (e.g.@: used only by a reduction computation). Otherwise, the
@code{widen_mult_hi/lo} idioms will be used.
@end deftypefn
@@ -6214,14 +6214,14 @@ used to initialize data used by the previous hook.
@deftypefn {Target Hook} void TARGET_SCHED_DFA_PRE_CYCLE_ADVANCE (void)
The hook to notify target that the current simulated cycle is about to finish.
The hook is analogous to @samp{TARGET_SCHED_DFA_PRE_CYCLE_INSN} but used
-to change the state in more complicated situations - e.g. when advancing
+to change the state in more complicated situations - e.g., when advancing
state on a single insn is not enough.
@end deftypefn
@deftypefn {Target Hook} void TARGET_SCHED_DFA_POST_CYCLE_ADVANCE (void)
The hook to notify target that new simulated cycle has just started.
The hook is analogous to @samp{TARGET_SCHED_DFA_POST_CYCLE_INSN} but used
-to change the state in more complicated situations - e.g. when advancing
+to change the state in more complicated situations - e.g., when advancing
state on a single insn is not enough.
@end deftypefn
-------------- next part --------------
gcc/ChangeLog:
2008-02-14 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* doc/c-tree.texi: Use @dots{} and @enddots{} where appropriate.
* doc/cfg.texi: Likewise.
* doc/extend.texi: Likewise.
* doc/gty.texi: Likewise.
* doc/invoke.texi: Likewise.
* doc/loop.texi: Likewise.
* doc/md.texi: Likewise.
* doc/passes.texi: Likewise.
* doc/rtl.texi: Likewise.
* doc/sourcebuild.texi: Likewise.
* doc/tm.texi: Likewise.
* doc/tree-ssa.texi: Likewise.
diff --git a/gcc/doc/c-tree.texi b/gcc/doc/c-tree.texi
index cde75dd..2713731 100644
--- a/gcc/doc/c-tree.texi
+++ b/gcc/doc/c-tree.texi
@@ -2537,7 +2537,7 @@ tree call, arg;
call_expr_arg_iterator iter;
FOR_EACH_CALL_EXPR_ARG (arg, iter, call)
/* arg is bound to successive arguments of call. */
- ...;
+ @dots{};
@end smallexample
For non-static
@@ -2704,7 +2704,7 @@ analysis.
@item OMP_PARALLEL
-Represents @code{#pragma omp parallel [clause1 ... clauseN]}. It
+Represents @code{#pragma omp parallel [clause1 @dots{} clauseN]}. It
has four operands:
Operand @code{OMP_PARALLEL_BODY} is valid while in GENERIC and
@@ -2729,7 +2729,7 @@ variables.
@item OMP_FOR
-Represents @code{#pragma omp for [clause1 ... clauseN]}. It
+Represents @code{#pragma omp for [clause1 @dots{} clauseN]}. It
has 5 operands:
Operand @code{OMP_FOR_BODY} contains the loop body.
@@ -2762,7 +2762,7 @@ unspecified by the standard.
@item OMP_SECTIONS
-Represents @code{#pragma omp sections [clause1 ... clauseN]}.
+Represents @code{#pragma omp sections [clause1 @dots{} clauseN]}.
Operand @code{OMP_SECTIONS_BODY} contains the sections body,
which in turn contains a set of @code{OMP_SECTION} nodes for
diff --git a/gcc/doc/cfg.texi b/gcc/doc/cfg.texi
index dca8847..934a1c6 100644
--- a/gcc/doc/cfg.texi
+++ b/gcc/doc/cfg.texi
@@ -292,13 +292,13 @@ series of jumps,
@smallexample
goto *x;
- [ ... ]
+ [ @dots{} ]
goto *x;
- [ ... ]
+ [ @dots{} ]
goto *x;
- [ ... ]
+ [ @dots{} ]
@end smallexample
@noindent
@@ -307,13 +307,13 @@ which has a much simpler flow graph:
@smallexample
goto y;
- [ ... ]
+ [ @dots{} ]
goto y;
- [ ... ]
+ [ @dots{} ]
goto y;
- [ ... ]
+ [ @dots{} ]
y:
goto *x;
diff --git a/gcc/doc/extend.texi b/gcc/doc/extend.texi
index 1d53a07..3d54307 100644
--- a/gcc/doc/extend.texi
+++ b/gcc/doc/extend.texi
@@ -11117,7 +11117,7 @@ macros are defined.
Modifies the disposition of a diagnostic. Note that not all
diagnostics are modifiable; at the moment only warnings (normally
-controlled by @samp{-W...}) can be controlled, and not all of them.
+controlled by @samp{-W@dots{}}) can be controlled, and not all of them.
Use @option{-fdiagnostics-show-option} to determine which diagnostics
are controllable and which option controls them.
diff --git a/gcc/doc/gty.texi b/gcc/doc/gty.texi
index ed677c6..7dc01ad 100644
--- a/gcc/doc/gty.texi
+++ b/gcc/doc/gty.texi
@@ -96,14 +96,14 @@ The structure that immediately contains the current structure.
@item %0
The outermost structure that contains the current structure.
@item %a
-A partial expression of the form @code{[i1][i2]...} that indexes
+A partial expression of the form @code{[i1][i2]@dots{}} that indexes
the array item currently being marked.
@end table
For instance, suppose that you have a structure of the form
@smallexample
struct A @{
- ...
+ @dots{}
@};
struct B @{
struct A foo[12];
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index 2809812..f8d3949 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -5002,7 +5002,7 @@ position in code. Better debugging information is then generated
(if the debugging information format supports this information).
It is enabled by default when compiling with optimization (@option{-Os},
-@option{-O}, @option{-O2}, ...), debugging information (@option{-g}) and
+@option{-O}, @option{-O2}, @dots{}), debugging information (@option{-g}) and
the debug info format supports it.
@item -print-file-name=@var{library}
diff --git a/gcc/doc/loop.texi b/gcc/doc/loop.texi
index e9eca7c..41017b0 100644
--- a/gcc/doc/loop.texi
+++ b/gcc/doc/loop.texi
@@ -348,7 +348,7 @@ and step must be the same. A variable has evolution
loop) equivalent to @code{x_1} in the following example
@smallexample
-while (...)
+while (@dots{})
@{
x_1 = phi (base, x_2);
x_2 = x_1 + step;
diff --git a/gcc/doc/md.texi b/gcc/doc/md.texi
index 0744fc4..499df6b 100644
--- a/gcc/doc/md.texi
+++ b/gcc/doc/md.texi
@@ -7752,7 +7752,7 @@ rtx-based construct, such as a @code{define_insn},
The syntax for defining a mode iterator is:
@smallexample
-(define_mode_iterator @var{name} [(@var{mode1} "@var{cond1}") ... (@var{moden} "@var{condn}")])
+(define_mode_iterator @var{name} [(@var{mode1} "@var{cond1}") @dots{} (@var{moden} "@var{condn}")])
@end smallexample
This allows subsequent @file{.md} file constructs to use the mode suffix
@@ -7819,7 +7819,7 @@ the mode in lower case, and @code{MODE}, which is the same thing in
upper case. You can define other attributes using:
@smallexample
-(define_mode_attr @var{name} [(@var{mode1} "@var{value1}") ... (@var{moden} "@var{valuen}")])
+(define_mode_attr @var{name} [(@var{mode1} "@var{value1}") @dots{} (@var{moden} "@var{valuen}")])
@end smallexample
where @var{name} is the name of the attribute and @var{valuei}
@@ -7829,7 +7829,7 @@ When GCC replaces some @var{:iterator} with @var{:mode}, it will scan
each string and mode in the pattern for sequences of the form
@code{<@var{iterator}:@var{attr}>}, where @var{attr} is the name of a
mode attribute. If the attribute is defined for @var{mode}, the whole
-@code{<...>} sequence will be replaced by the appropriate attribute
+@code{<@dots{}>} sequence will be replaced by the appropriate attribute
value.
For example, suppose an @file{.md} file has:
@@ -7849,8 +7849,8 @@ Here is an example of using an attribute for a mode:
@smallexample
(define_mode_iterator LONG [SI DI])
(define_mode_attr SHORT [(SI "HI") (DI "SI")])
-(define_insn ...
- (sign_extend:LONG (match_operand:<LONG:SHORT> ...)) ...)
+(define_insn @dots{}
+ (sign_extend:LONG (match_operand:<LONG:SHORT> @dots{})) @dots{})
@end smallexample
The @code{@var{iterator}:} prefix may be omitted, in which case the
@@ -7914,7 +7914,7 @@ Code iterators operate in a similar way to mode iterators. @xref{Mode Iterators
The construct:
@smallexample
-(define_code_iterator @var{name} [(@var{code1} "@var{cond1}") ... (@var{coden} "@var{condn}")])
+(define_code_iterator @var{name} [(@var{code1} "@var{cond1}") @dots{} (@var{coden} "@var{condn}")])
@end smallexample
defines a pseudo rtx code @var{name} that can be instantiated as
@@ -7932,7 +7932,7 @@ code in lower case, and @code{CODE}, the name of the code in upper case.
Other attributes are defined using:
@smallexample
-(define_code_attr @var{name} [(@var{code1} "@var{value1}") ... (@var{coden} "@var{valuen}")])
+(define_code_attr @var{name} [(@var{code1} "@var{value1}") @dots{} (@var{coden} "@var{valuen}")])
@end smallexample
Here's an example of code iterators in action, taken from the MIPS port:
@@ -7981,7 +7981,7 @@ This is equivalent to:
DONE;
@})
-...
+@dots{}
@end smallexample
@end ifset
diff --git a/gcc/doc/passes.texi b/gcc/doc/passes.texi
index b1505ec..a7ddecc 100644
--- a/gcc/doc/passes.texi
+++ b/gcc/doc/passes.texi
@@ -167,7 +167,7 @@ what is present is useful, and a far sight better than nothing at all.
TODO: describe the global variables set up by the pass manager,
and a brief description of how a new pass should use it.
-I need to look at what info rtl passes use first...
+I need to look at what info rtl passes use first@enddots{}
@node Tree-SSA passes
@section Tree-SSA passes
diff --git a/gcc/doc/rtl.texi b/gcc/doc/rtl.texi
index bd0effe..e3d5581 100644
--- a/gcc/doc/rtl.texi
+++ b/gcc/doc/rtl.texi
@@ -1904,7 +1904,7 @@ declarations and during RTL generation. It should not appear in the
ordinary insn chain.
@findex concatn
-@item (concatn@var{m} [@var{rtx} ...])
+@item (concatn@var{m} [@var{rtx} @dots{}])
This RTX represents the concatenation of all the @var{rtx} to make a
single value. Like @code{concat}, this should only appear in
declarations, and not in the insn chain.
diff --git a/gcc/doc/sourcebuild.texi b/gcc/doc/sourcebuild.texi
index cad3a88..2ec25c6 100644
--- a/gcc/doc/sourcebuild.texi
+++ b/gcc/doc/sourcebuild.texi
@@ -970,7 +970,7 @@ This DejaGnu directive provides a list of compiler options, to be used
if the target system matches @var{selector}, that replace the default
options used for this set of tests.
-@item @{ dg-add-options @var{feature} ... @}
+@item @{ dg-add-options @var{feature} @dots{} @}
Add any compiler options that are needed to access certain features.
This directive does nothing on targets that enable the features by
default, or that don't provide them at all. It must come after
@@ -1462,7 +1462,7 @@ These can be overridden by defining the environment variable
@smallexample
COMPAT_OPTIONS="[list [list @{@var{tst1}@} @{@var{alt1}@}]
- ...[list @{@var{tstn}@} @{@var{altn}@}]]"
+ @dots{}[list @{@var{tstn}@} @{@var{altn}@}]]"
@end smallexample
where @var{tsti} and @var{alti} are lists of options, with @var{tsti}
diff --git a/gcc/doc/tm.texi b/gcc/doc/tm.texi
index 5207953..2c1446f 100644
--- a/gcc/doc/tm.texi
+++ b/gcc/doc/tm.texi
@@ -3218,11 +3218,11 @@ This target hook allows the backend to emit frame-related insns that
contain UNSPECs or UNSPEC_VOLATILEs. The DWARF 2 call frame debugging
info engine will invoke it on insns of the form
@smallexample
-(set (reg) (unspec [...] UNSPEC_INDEX))
+(set (reg) (unspec [@dots{}] UNSPEC_INDEX))
@end smallexample
and
@smallexample
-(set (reg) (unspec_volatile [...] UNSPECV_INDEX)).
+(set (reg) (unspec_volatile [@dots{}] UNSPECV_INDEX)).
@end smallexample
to let the backend emit the call frame instructions. @var{label} is
the CFI label attached to the insn, @var{pattern} is the pattern of
diff --git a/gcc/doc/tree-ssa.texi b/gcc/doc/tree-ssa.texi
index 8cd8452..51438c2 100644
--- a/gcc/doc/tree-ssa.texi
+++ b/gcc/doc/tree-ssa.texi
@@ -828,7 +828,7 @@ instance, given
@{
int a, b, *p;
- if (...)
+ if (@dots{})
p = &a;
else
p = &b;
@@ -850,7 +850,7 @@ operands, use the @option{-vops} option to @option{-fdump-tree}:
@{
int a, b, *p;
- if (...)
+ if (@dots{})
p = &a;
else
p = &b;
@@ -1207,9 +1207,9 @@ all the incoming versions of the variable to create a new name
for it. For instance,
@smallexample
-if (...)
+if (@dots{})
a_1 = 5;
-else if (...)
+else if (@dots{})
a_2 = 2;
else
a_3 = 13;
@@ -1294,11 +1294,11 @@ Suppose that we insert new names @code{x_10} and @code{x_11} (lines
1 L0:
2 x_1 = PHI (0, x_5)
3 if (x_1 < 10)
- 4 x_10 = ...
+ 4 x_10 = @dots{}
5 if (x_1 > 7)
6 y_2 = 0
7 else
- 8 x_11 = ...
+ 8 x_11 = @dots{}
9 y_3 = x_1 + x_7
10 endif
11 x_5 = x_1 + 1
@@ -1390,7 +1390,7 @@ modifications should be bracketed between calls to
munge_stmt (tree stmt)
@{
push_stmt_changes (&stmt);
- ... rewrite STMT ...
+ @dots{} rewrite STMT @dots{}
pop_stmt_changes (&stmt);
@}
@end smallexample
@@ -1666,7 +1666,7 @@ T, we add Vi to the may-aliases set for T@. Meaning that
after alias analysis, we will have:
@smallexample
-may-aliases(T) = @{ V1, V2, V3, ..., Vn @}
+may-aliases(T) = @{ V1, V2, V3, @dots{}, Vn @}
@end smallexample
This means that every statement that references T, will get
@@ -1677,7 +1677,7 @@ to the alias set of all the Vi variables:
@smallexample
may-aliases(V1) = @{ T @}
may-aliases(V2) = @{ T @}
-...
+@dots{}
may-aliases(Vn) = @{ T @}
@end smallexample
-------------- next part --------------
gcc/ChangeLog:
2008-02-14 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* doc/bugreport.texi: Update copyright years.
* doc/c-tree.texi: Likewise.
* doc/cfg.texi: Likewise.
* doc/cpp.texi: Likewise.
* doc/cppinternals.texi: Likewise.
* doc/fragments.texi: Likewise.
* doc/frontends.texi: Likewise.
* doc/gcc.texi: Likewise.
* doc/gty.texi: Likewise.
* doc/hostconfig.texi: Likewise.
* doc/implement-c.texi: Likewise.
* doc/libgcc.texi: Likewise.
* doc/loop.texi: Likewise.
* doc/makefile.texi: Likewise.
* doc/options.texi: Likewise.
* doc/passes.texi: Likewise.
* doc/rtl.texi: Likewise.
* doc/sourcebuild.texi: Likewise.
* doc/standards.texi: Likewise.
* doc/tree-ssa.texi: Likewise.
* doc/trouble.texi: Likewise.
diff --git a/gcc/doc/bugreport.texi b/gcc/doc/bugreport.texi
index 88c668c..536f934 100644
--- a/gcc/doc/bugreport.texi
+++ b/gcc/doc/bugreport.texi
@@ -1,5 +1,5 @@
@c Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-@c 1999, 2000, 2001, 2003, 2004 Free Software Foundation, Inc.
+@c 1999, 2000, 2001, 2003, 2004, 2007 Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/c-tree.texi b/gcc/doc/c-tree.texi
index 2713731..d727689 100644
--- a/gcc/doc/c-tree.texi
+++ b/gcc/doc/c-tree.texi
@@ -1,4 +1,4 @@
-@c Copyright (c) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+@c Copyright (c) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
@c Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/cfg.texi b/gcc/doc/cfg.texi
index 934a1c6..80440af 100644
--- a/gcc/doc/cfg.texi
+++ b/gcc/doc/cfg.texi
@@ -1,5 +1,6 @@
@c -*-texinfo-*-
-@c Copyright (C) 2001, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+@c Copyright (C) 2001, 2003, 2004, 2005, 2006, 2007, 2008 Free Software
+@c Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/cpp.texi b/gcc/doc/cpp.texi
index 740dd3b..1963ebc 100644
--- a/gcc/doc/cpp.texi
+++ b/gcc/doc/cpp.texi
@@ -11,7 +11,7 @@
@copying
@c man begin COPYRIGHT
Copyright @copyright{} 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996,
-1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
diff --git a/gcc/doc/cppinternals.texi b/gcc/doc/cppinternals.texi
index ff6acc3..15e4a4c 100644
--- a/gcc/doc/cppinternals.texi
+++ b/gcc/doc/cppinternals.texi
@@ -18,7 +18,8 @@
@ifinfo
This file documents the internals of the GNU C Preprocessor.
-Copyright 2000, 2001, 2002, 2004, 2005 Free Software Foundation, Inc.
+Copyright 2000, 2001, 2002, 2004, 2005, 2006, 2007 Free Software
+Foundation, Inc.
Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
diff --git a/gcc/doc/fragments.texi b/gcc/doc/fragments.texi
index 00dcc76..450fd50 100644
--- a/gcc/doc/fragments.texi
+++ b/gcc/doc/fragments.texi
@@ -1,5 +1,5 @@
@c Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-@c 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
+@c 1999, 2000, 2001, 2003, 2004, 2005 Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/frontends.texi b/gcc/doc/frontends.texi
index 68d3ba0..827f6a4 100644
--- a/gcc/doc/frontends.texi
+++ b/gcc/doc/frontends.texi
@@ -1,5 +1,5 @@
@c Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-@c 1999, 2000, 2001, 2004 Free Software Foundation, Inc.
+@c 1999, 2000, 2001, 2002, 2004 Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/gcc.texi b/gcc/doc/gcc.texi
index 3e10e09..e52d79a 100644
--- a/gcc/doc/gcc.texi
+++ b/gcc/doc/gcc.texi
@@ -41,8 +41,8 @@
@copying
Copyright @copyright{} 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
-2007 Free Software Foundation, Inc.
+1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+2008 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.2 or
diff --git a/gcc/doc/gty.texi b/gcc/doc/gty.texi
index 7dc01ad..2ffa151 100644
--- a/gcc/doc/gty.texi
+++ b/gcc/doc/gty.texi
@@ -1,4 +1,4 @@
-@c Copyright (C) 2002, 2003, 2004, 2007
+@c Copyright (C) 2002, 2003, 2004, 2007, 2008
@c Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/hostconfig.texi b/gcc/doc/hostconfig.texi
index 1c97ac2..4c95c0c 100644
--- a/gcc/doc/hostconfig.texi
+++ b/gcc/doc/hostconfig.texi
@@ -1,5 +1,5 @@
@c Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-@c 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+@c 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gccint.texi.
diff --git a/gcc/doc/implement-c.texi b/gcc/doc/implement-c.texi
index dc99610..b7d34ee 100644
--- a/gcc/doc/implement-c.texi
+++ b/gcc/doc/implement-c.texi
@@ -1,4 +1,4 @@
-@c Copyright (C) 2001,2002,2003,2004 Free Software Foundation, Inc.
+@c Copyright (C) 2001, 2002, 2003, 2004, 2006 Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/libgcc.texi b/gcc/doc/libgcc.texi
index 149c6fc..4026399 100644
--- a/gcc/doc/libgcc.texi
+++ b/gcc/doc/libgcc.texi
@@ -1,4 +1,4 @@
-@c Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+@c Copyright (C) 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
@c Contributed by Aldy Hernandez <aldy@quesejoda.com>
diff --git a/gcc/doc/loop.texi b/gcc/doc/loop.texi
index 41017b0..52e14fa 100644
--- a/gcc/doc/loop.texi
+++ b/gcc/doc/loop.texi
@@ -1,4 +1,4 @@
-@c Copyright (c) 2006 Free Software Foundation, Inc.
+@c Copyright (c) 2006, 2007, 2008 Free Software Foundation, Inc.
@c Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/makefile.texi b/gcc/doc/makefile.texi
index 5dbe81e..434f796 100644
--- a/gcc/doc/makefile.texi
+++ b/gcc/doc/makefile.texi
@@ -1,4 +1,4 @@
-@c Copyright (C) 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+@c Copyright (C) 2001, 2002, 2003, 2004, 2006 Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/options.texi b/gcc/doc/options.texi
index eeccdec..6b5fead 100644
--- a/gcc/doc/options.texi
+++ b/gcc/doc/options.texi
@@ -1,4 +1,4 @@
-@c Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+@c Copyright (C) 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/passes.texi b/gcc/doc/passes.texi
index a7ddecc..526eb76 100644
--- a/gcc/doc/passes.texi
+++ b/gcc/doc/passes.texi
@@ -1,7 +1,8 @@
@c markers: CROSSREF BUG TODO
@c Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-@c 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+@c 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software
+@c Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/rtl.texi b/gcc/doc/rtl.texi
index e3d5581..ab65903 100644
--- a/gcc/doc/rtl.texi
+++ b/gcc/doc/rtl.texi
@@ -1,5 +1,5 @@
@c Copyright (C) 1988, 1989, 1992, 1994, 1997, 1998, 1999, 2000, 2001, 2002,
-@c 2003, 2004, 2005, 2006, 2007
+@c 2003, 2004, 2005, 2006, 2007, 2008
@c Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/sourcebuild.texi b/gcc/doc/sourcebuild.texi
index 2ec25c6..d4b7753 100644
--- a/gcc/doc/sourcebuild.texi
+++ b/gcc/doc/sourcebuild.texi
@@ -1,4 +1,5 @@
-@c Copyright (C) 2002, 2003, 2004, 2005, 2007 Free Software Foundation, Inc.
+@c Copyright (C) 2002, 2003, 2004, 2005, 2007, 2008 Free Software Foundation,
+@c Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/standards.texi b/gcc/doc/standards.texi
index bc1a102..cd6e82f 100644
--- a/gcc/doc/standards.texi
+++ b/gcc/doc/standards.texi
@@ -1,4 +1,5 @@
-@c Copyright (C) 2000, 2001, 2002, 2004 Free Software Foundation, Inc.
+@c Copyright (C) 2000, 2001, 2002, 2004, 2006, 2007 Free Software Foundation,
+@c Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/tree-ssa.texi b/gcc/doc/tree-ssa.texi
index 51438c2..b6ba493 100644
--- a/gcc/doc/tree-ssa.texi
+++ b/gcc/doc/tree-ssa.texi
@@ -1,4 +1,4 @@
-@c Copyright (c) 2004, 2005, 2007 Free Software Foundation, Inc.
+@c Copyright (c) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
@c Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
diff --git a/gcc/doc/trouble.texi b/gcc/doc/trouble.texi
index 059d5cf..8a31a74 100644
--- a/gcc/doc/trouble.texi
+++ b/gcc/doc/trouble.texi
@@ -1,5 +1,6 @@
@c Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-@c 1999, 2000, 2001, 2003, 2004 Free Software Foundation, Inc.
+@c 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 Free Software Foundation,
+@c Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
More information about the Gcc-patches
mailing list