CRIS: Add hardware support for __builtin_ctz

Jesper Nilsson jesper.nilsson@axis.com
Tue Sep 4 14:37:00 GMT 2007


Hi,

Sorry, didn't catch the typo in the comment for cris_swap_bits
until to late. Please find corrected patch below.

Best regards,

/Jesper Nilsson

On Tue, Sep 04, 2007 at 04:30:48PM +0200, Jesper Nilsson wrote:
> Hi,
> 
> This patch for CRIS adds support for __builtin_ctz using the machine
> instruction 'swap' (which can be used to reverse the bit order of a
> register) in combination with 'clz'.
> 
> The implementation uses an unspec insn for the bitswapping,
> and a define_expand for combining the bitswap and the clz.
> 
> I've added the define for count_trailing_zeros as an analog to
> count_leading_zeros in longlong.h, inside an additional test
> for __CRIS_arch_version >= 8.
> 
> I've also added testcases for this instruction that checks
> for existence and absence of the special swap-instruction in
> assembler output.
> 
> 
> One question mark still remaining is why the define_expand for
> ctzsi2 can't use the following:
> 
> (define_expand "ctzsi2"
>   [(set (match_scratch:SI 2)
>         (match_operand:SI 0 "register_operand"))
>    (set (match_dup 2)
>         (unspec:SI [(match_dup 2)] CRIS_UNSPEC_SWAP_BITS))
>    (set (match_operand:SI 0 "register_operand")
>         (clz:SI (match_dup 2)))
>   ]
>   "TARGET_HAS_LZ && TARGET_HAS_SWAP"
>   ""
>   )
> 
> If the above construction is used, I get an ICE in copy_rtx for the
> scratch operand...
> 
> 
> 
> Testing has been done for cris-axis-elf on i686-pc-linux-gnu using
> make check 'RUNTESTFLAGS=--target_board=cris-sim\{,-march=v3,-march=v8,-march=v10\}'
> No new regressions found.
> 
> Best regards,
> 
> /Jesper Nilsson
> 
> :ADDPATCH cris ctz:
> 
> gcc/ChangeLog:
> 
> 2007-09-03  Jesper Nilsson  <jesper.nilsson@axis.com>
> 
> 	* longlong.h  [__CRIS_arch_version >= 8] (count_trailing_zeros):
> 	Defined.
> 	* config/cris/cris.md (ctzsi2, cris_swap_bits): Implemented.
> 	* config/cris/cris.h (CTZ_DEFINED_VALUE_AT_ZERO): Defined.
> 
> testsuite/ChangeLog:
> 
> 2007-09-03  Jesper Nilsson  <jesper.nilsson@axis.com>
> 
> 	* gcc.target/cris/builtin_ctz_v3.c: New testcase.
> 	* gcc.target/cris/builtin_ctz_v8.c: New testcase.

Index: longlong.h
===================================================================
--- longlong.h	(revision 128037)
+++ longlong.h	(working copy)
@@ -228,6 +228,9 @@
 
 #if defined (__CRIS__) && __CRIS_arch_version >= 3
 #define count_leading_zeros(COUNT, X) ((COUNT) = __builtin_clz (X))
+#if __CRIS_arch_version >= 8
+#define count_trailing_zeros(COUNT, X) ((COUNT) = __builtin_ctz (X))
+#endif
 #endif /* __CRIS__ */
 
 #if defined (__hppa) && W_TYPE_SIZE == 32
Index: config/cris/cris.md
===================================================================
--- config/cris/cris.md	(revision 128067)
+++ config/cris/cris.md	(working copy)
@@ -69,7 +69,8 @@
    (CRIS_UNSPEC_GOT 2)
    (CRIS_UNSPEC_GOTREL 3)
    (CRIS_UNSPEC_GOTREAD 4)
-   (CRIS_UNSPEC_PLTGOTREAD 5)])
+   (CRIS_UNSPEC_PLTGOTREAD 5)
+   (CRIS_UNSPEC_SWAP_BITS 6)])
 
 ;; Register numbers.
 (define_constants
@@ -2678,6 +2679,32 @@
   "swapwb %0"
   [(set_attr "slottable" "yes")])
 
+;; This instruction swaps all bits in a register.
+;; That means that the most significant bit is put in the place
+;; of the least significant bit, and so on.
+
+(define_insn "cris_swap_bits"
+  [(set (match_operand:SI 0 "register_operand" "=r")
+        (unspec:SI [(match_operand:SI 1 "register_operand" "0")]
+         CRIS_UNSPEC_SWAP_BITS))]
+  "TARGET_HAS_SWAP"
+  "swapwbr %0"
+  [(set_attr "slottable" "yes")])
+
+;; Implement ctz using two instructions, one for bit swap and one for clz.
+;; Defines a scratch register to avoid clobbering input.
+
+(define_expand "ctzsi2"
+  [(set (match_dup 2)
+        (match_operand:SI 1 "register_operand"))
+   (set (match_dup 2)
+        (unspec:SI [(match_dup 2)] CRIS_UNSPEC_SWAP_BITS))
+   (set (match_operand:SI 0 "register_operand")
+        (clz:SI (match_dup 2)))]
+  "TARGET_HAS_LZ && TARGET_HAS_SWAP"
+  "operands[2] = gen_reg_rtx (SImode);"
+  )
+
 ;; Bound-insn.  Defined to be the same as an unsigned minimum, which is an
 ;; operation supported by gcc.  Used in casesi, but used now and then in
 ;; normal code too.
Index: config/cris/cris.h
===================================================================
--- config/cris/cris.h	(revision 128067)
+++ config/cris/cris.h	(working copy)
@@ -1410,6 +1410,7 @@
 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
 
 #define CLZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) ((VALUE) = 32, 1)
+#define CTZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) ((VALUE) = 32, 1)
 
 #define Pmode SImode
 


/^JN - Jesper Nilsson
--
               Jesper Nilsson -- jesper.nilsson@axis.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: builtin_ctz_v3.c
Type: text/x-csrc
Size: 366 bytes
Desc: not available
URL: <http://gcc.gnu.org/pipermail/gcc-patches/attachments/20070904/a22c3d8e/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: builtin_ctz_v8.c
Type: text/x-csrc
Size: 355 bytes
Desc: not available
URL: <http://gcc.gnu.org/pipermail/gcc-patches/attachments/20070904/a22c3d8e/attachment-0001.bin>


More information about the Gcc-patches mailing list