[patch] h8300.md: Remove explicit (set_attr "cc" "clobber").
Kazu Hirata
kazu@cs.umass.edu
Mon Feb 16 08:29:00 GMT 2004
Hi,
Attached is a patch to remove explicit (set_attr "cc" "clobber") in
preparation for MODE_CC conversion.
Tested on h8300-elf. Committed.
Kazu Hirata
2004-02-15 Kazu Hirata <kazu@cs.umass.edu>
* config/h8300/h8300.md: Remove explicit (set_attr "cc"
"clobber").
Index: h8300.md
===================================================================
RCS file: /cvs/gcc/gcc/gcc/config/h8300/h8300.md,v
retrieving revision 1.263
diff -u -r1.263 h8300.md
--- h8300.md 10 Feb 2004 23:58:59 -0000 1.263
+++ h8300.md 14 Feb 2004 19:33:16 -0000
@@ -128,8 +128,7 @@
"TARGET_H8300
&& operands[0] != stack_pointer_rtx"
"mov.w\\t%T0,@-r7"
- [(set_attr "length" "2")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "2")])
(define_insn "pushqi1_h8300hs"
[(parallel [(set (reg:SI SP_REG)
@@ -139,8 +138,7 @@
"(TARGET_H8300H || TARGET_H8300S)
&& operands[0] != stack_pointer_rtx"
"mov.l\\t%S0,@-er7"
- [(set_attr "length" "4")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "4")])
(define_insn "pushqi1_h8300hs_normal"
[(parallel [(set (reg:HI SP_REG)
@@ -150,8 +148,7 @@
"(TARGET_H8300H || TARGET_H8300S)
&& operands[0] != stack_pointer_rtx"
"mov.l\\t%S0,@-er7"
- [(set_attr "length" "4")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "4")])
(define_expand "pushqi1"
[(match_operand:QI 0 "register_operand" "")]
@@ -246,8 +243,7 @@
"(TARGET_H8300H || TARGET_H8300S)
&& operands[0] != stack_pointer_rtx"
"mov.l\\t%S0,@-er7"
- [(set_attr "length" "4")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "4")])
(define_insn "pushhi1_h8300hs_normal"
[(parallel [(set (reg:HI SP_REG)
@@ -257,8 +253,7 @@
"(TARGET_H8300H || TARGET_H8300S)
&& operands[0] != stack_pointer_rtx"
"mov.l\\t%S0,@-er7"
- [(set_attr "length" "4")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "4")])
(define_expand "pushhi1"
[(match_operand:HI 0 "register_operand" "")]
@@ -457,8 +452,7 @@
}
}"
[(set (attr "length")
- (symbol_ref "compute_mov_length (operands)"))
- (set_attr "cc" "clobber")])
+ (symbol_ref "compute_mov_length (operands)"))])
(define_insn "*movsf_h8300"
[(set (match_operand:SF 0 "general_operand_dst" "=r,r,r,o,<,r")
@@ -514,8 +508,7 @@
}
}"
[(set (attr "length")
- (symbol_ref "compute_mov_length (operands)"))
- (set_attr "cc" "clobber")])
+ (symbol_ref "compute_mov_length (operands)"))])
(define_insn "*movsi_h8300hs"
[(set (match_operand:SI 0 "general_operand_dst" "=r,r,r,<,r,r,m,*a,*a,r")
@@ -1011,8 +1004,7 @@
(match_operand:SI 2 "register_operand" "r")))]
"TARGET_H8300"
"sub.w %f2,%f0\;subx %y2,%y0\;subx %z2,%z0"
- [(set_attr "length" "6")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "6")])
(define_insn "*subsi3_h8300hs"
[(set (match_operand:SI 0 "register_operand" "=r,r")
@@ -1122,8 +1114,7 @@
else
return \"divxu.b\\t%X2,%T0\;mov.b\\t%t0,%s3\";
}"
- [(set_attr "length" "4")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "4")])
(define_insn "divmodqi4"
[(set (match_operand:QI 0 "register_operand" "=r")
@@ -1144,8 +1135,7 @@
else
return \"divxs.b\\t%X2,%T0\;mov.b\\t%t0,%s3\";
}"
- [(set_attr "length" "6")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "6")])
(define_insn "udivmodhi4"
[(set (match_operand:HI 0 "register_operand" "=r")
@@ -1166,8 +1156,7 @@
else
return \"divxu.w\\t%T2,%S0\;mov.w\\t%e0,%f3\";
}"
- [(set_attr "length" "4")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "4")])
(define_insn "divmodhi4"
[(set (match_operand:HI 0 "register_operand" "=r")
@@ -1188,8 +1177,7 @@
else
return \"divxs.w\\t%T2,%S0\;mov.w\\t%e0,%f3\";
}"
- [(set_attr "length" "6")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "6")])
;; ----------------------------------------------------------------------
;; AND INSTRUCTIONS
@@ -1232,8 +1220,7 @@
(match_operand:QI 1 "register_operand" "0")))]
""
"bld\\t%V3,%X2\;bor\\t%V3,%X0\;bst\\t%V3,%X0"
- [(set_attr "length" "6")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "6")])
(define_insn "*andorhi3"
[(set (match_operand:HI 0 "register_operand" "=r")
@@ -1251,8 +1238,7 @@
}
return \"bld\\t%V3,%s2\;bor\\t%V3,%s0\;bst\\t%V3,%s0\";
}"
- [(set_attr "length" "6")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "6")])
(define_insn "*andorsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -1270,8 +1256,7 @@
}
return \"bld\\t%V3,%w2\;bor\\t%V3,%w0\;bst\\t%V3,%w0\";
}"
- [(set_attr "length" "6")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "6")])
(define_insn "*andorsi3_shift_8"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -1281,8 +1266,7 @@
(match_operand:SI 1 "register_operand" "0")))]
""
"or.b\\t%w2,%x0"
- [(set_attr "length" "2")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "2")])
(define_expand "andsi3"
[(set (match_operand:SI 0 "register_operand" "")
@@ -1484,16 +1468,14 @@
(neg:SF (match_operand:SF 1 "register_operand" "0")))]
"TARGET_H8300"
"xor.b\\t#128,%z0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "2")])
+ [(set_attr "length" "2")])
(define_insn "*negsf2_h8300hs"
[(set (match_operand:SF 0 "register_operand" "=r")
(neg:SF (match_operand:SF 1 "register_operand" "0")))]
"TARGET_H8300H || TARGET_H8300S"
"xor.w\\t#32768,%e0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "4")])
+ [(set_attr "length" "4")])
;; ----------------------------------------------------------------------
;; ABSOLUTE VALUE INSTRUCTIONS
@@ -1510,16 +1492,14 @@
(abs:SF (match_operand:SF 1 "register_operand" "0")))]
"TARGET_H8300"
"and.b\\t#127,%z0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "2")])
+ [(set_attr "length" "2")])
(define_insn "*abssf2_h8300hs"
[(set (match_operand:SF 0 "register_operand" "=r")
(abs:SF (match_operand:SF 1 "register_operand" "0")))]
"TARGET_H8300H || TARGET_H8300S"
"and.w\\t#32767,%e0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "4")])
+ [(set_attr "length" "4")])
;; ----------------------------------------------------------------------
;; NOT INSTRUCTIONS
@@ -1544,8 +1524,7 @@
(not:HI (match_operand:HI 1 "register_operand" "0")))]
"TARGET_H8300"
"not %s0\;not %t0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "4")])
+ [(set_attr "length" "4")])
(define_insn "*one_cmplhi2_h8300hs"
[(set (match_operand:HI 0 "register_operand" "=r")
@@ -1566,8 +1545,7 @@
(not:SI (match_operand:SI 1 "register_operand" "0")))]
"TARGET_H8300"
"not %w0\;not %x0\;not %y0\;not %z0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "8")])
+ [(set_attr "length" "8")])
(define_insn "*one_complsi2_h8300hs"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -1825,8 +1803,7 @@
else
return \"jsr\\t%0\";
}"
- [(set_attr "cc" "clobber")
- (set (attr "length")
+ [(set (attr "length")
(if_then_else (match_operand:QI 0 "small_call_insn_operand" "")
(const_int 2)
(const_int 4)))])
@@ -1849,8 +1826,7 @@
else
return \"jsr\\t%1\";
}"
- [(set_attr "cc" "clobber")
- (set (attr "length")
+ [(set (attr "length")
(if_then_else (match_operand:QI 0 "small_call_insn_operand" "")
(const_int 2)
(const_int 4)))])
@@ -2233,8 +2209,7 @@
return \"stc\texr,@-er7\;mov.l\\ter0,@-er7\;stc\tccr,r0l\;mov.b\tr0l,@(6,er7)\;mov.l\\t@er7+,er0\;orc\t#128,ccr\";
abort ();
}"
- [(set_attr "length" "20")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "20")])
;; ----------------------------------------------------------------------
;; EXTEND INSTRUCTIONS
@@ -2253,8 +2228,7 @@
"@
mov.b #0,%t0
#"
- [(set_attr "length" "2,10")
- (set_attr "cc" "clobber,clobber")])
+ [(set_attr "length" "2,10")])
(define_insn "*zero_extendqihi2_h8300hs"
[(set (match_operand:HI 0 "register_operand" "=r,r")
@@ -2294,8 +2268,7 @@
"@
mov.b #0,%x0\;sub.w %e0,%e0
mov.b %R1,%w0\;mov.b #0,%x0\;sub.w %e0,%e0"
- [(set_attr "length" "4,8")
- (set_attr "cc" "clobber,clobber")])
+ [(set_attr "length" "4,8")])
(define_insn "*zero_extendqisi2_h8300hs"
[(set (match_operand:SI 0 "register_operand" "=r,r")
@@ -2345,8 +2318,7 @@
sub.w %e0,%e0
mov.w %f1,%f0\;sub.w %e0,%e0
mov.w %e1,%f0\;sub.w %e0,%e0"
- [(set_attr "length" "2,4,6")
- (set_attr "cc" "clobber,clobber,clobber")])
+ [(set_attr "length" "2,4,6")])
(define_insn "*zero_extendhisi2_h8300hs"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -2369,8 +2341,7 @@
"@
bld #7,%s0\;subx %t0,%t0
mov.b %R1,%s0\;bld #7,%s0\;subx %t0,%t0"
- [(set_attr "length" "4,8")
- (set_attr "cc" "clobber,clobber")])
+ [(set_attr "length" "4,8")])
(define_insn "*extendqihi2_h8300hs"
[(set (match_operand:HI 0 "register_operand" "=r")
@@ -2393,8 +2364,7 @@
"@
bld #7,%w0\;subx %x0,%x0\;subx %y0,%y0\;subx %z0,%z0
mov.b %R1,%w0\;bld #7,%w0\;subx %x0,%x0\;subx %y0,%y0\;subx %z0,%z0"
- [(set_attr "length" "8,12")
- (set_attr "cc" "clobber,clobber")])
+ [(set_attr "length" "8,12")])
;; The following pattern is needed because without the pattern, the
;; combiner would split (sign_extend:SI (reg:QI)) into into two 24-bit
@@ -2425,8 +2395,7 @@
"@
bld #7,%x0\;subx %y0,%y0\;subx %z0,%z0
mov.w %T1,%f0\;bld #7,%x0\;subx %y0,%y0\;subx %z0,%z0"
- [(set_attr "length" "6,10")
- (set_attr "cc" "clobber,clobber")])
+ [(set_attr "length" "6,10")])
(define_insn "*extendhisi2_h8300hs"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -2650,8 +2619,7 @@
""
"* return output_a_rotate (ROTATE, operands);"
[(set (attr "length")
- (symbol_ref "compute_a_rotate_length (operands)"))
- (set_attr "cc" "clobber")])
+ (symbol_ref "compute_a_rotate_length (operands)"))])
(define_expand "rotlhi3"
[(set (match_operand:HI 0 "register_operand" "")
@@ -2667,8 +2635,7 @@
""
"* return output_a_rotate (ROTATE, operands);"
[(set (attr "length")
- (symbol_ref "compute_a_rotate_length (operands)"))
- (set_attr "cc" "clobber")])
+ (symbol_ref "compute_a_rotate_length (operands)"))])
(define_expand "rotlsi3"
[(set (match_operand:SI 0 "register_operand" "")
@@ -2684,8 +2651,7 @@
"TARGET_H8300H || TARGET_H8300S"
"* return output_a_rotate (ROTATE, operands);"
[(set (attr "length")
- (symbol_ref "compute_a_rotate_length (operands)"))
- (set_attr "cc" "clobber")])
+ (symbol_ref "compute_a_rotate_length (operands)"))])
;; -----------------------------------------------------------------
;; BIT FIELDS
@@ -2711,8 +2677,7 @@
(match_operand:HI 2 "immediate_operand" "n")))]
"TARGET_H8300"
"sub.w %0,%0\;bld %Z2,%Y1\;bst #0,%X0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "6")])
+ [(set_attr "length" "6")])
;;
;; Inverted loads with a 16bit destination.
@@ -2727,8 +2692,7 @@
"TARGET_H8300
&& (1 << INTVAL (operands[2])) == INTVAL (operands[3])"
"sub.w %0,%0\;bild %Z2,%Y1\;bst #0,%X0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "8")])
+ [(set_attr "length" "8")])
;;
;; Normal loads with a 32bit destination.
@@ -2742,8 +2706,7 @@
"TARGET_H8300
&& INTVAL (operands[2]) < 16"
"* return output_simode_bld (0, operands);"
- [(set_attr "cc" "clobber")
- (set_attr "length" "8")])
+ [(set_attr "length" "8")])
(define_insn "*extzv_1_r_h8300hs"
[(set (match_operand:SI 0 "register_operand" "=r,r")
@@ -2770,8 +2733,7 @@
&& INTVAL (operands[2]) < 16
&& (1 << INTVAL (operands[2])) == INTVAL (operands[3])"
"* return output_simode_bld (1, operands);"
- [(set_attr "cc" "clobber")
- (set_attr "length" "8")])
+ [(set_attr "length" "8")])
(define_insn "*extzv_1_r_inv_h8300hs"
[(set (match_operand:SI 0 "register_operand" "=r,r")
@@ -2811,8 +2773,7 @@
(match_operand:HI 2 "register_operand" "r"))]
""
"bld #0,%R2\;bst %Z1,%Y0 ; i1"
- [(set_attr "cc" "clobber")
- (set_attr "length" "4")])
+ [(set_attr "length" "4")])
(define_expand "extzv"
[(set (match_operand:HI 0 "register_operand" "")
@@ -2842,8 +2803,7 @@
(match_operand:HI 3 "bit_operand" "0")]))]
""
"bld %Z2,%Y1\;b%c4 #0,%R0\;bst #0,%R0; bl1"
- [(set_attr "cc" "clobber")
- (set_attr "length" "6")])
+ [(set_attr "length" "6")])
(define_insn ""
[(set (match_operand:HI 0 "bit_operand" "=Ur")
@@ -2856,8 +2816,7 @@
(match_operand:HI 4 "immediate_operand" "n"))]))]
""
"bld %Z2,%Y1\;b%c5 %Z4,%Y3\;bst #0,%R0; bl3"
- [(set_attr "cc" "clobber")
- (set_attr "length" "6")])
+ [(set_attr "length" "6")])
;; -----------------------------------------------------------------
;; COMBINE PATTERNS
@@ -2873,8 +2832,7 @@
"(TARGET_H8300H || TARGET_H8300S)
&& INTVAL (operands[1]) < 16"
"bld\\t#0,%w2\;bst\\t%Z1,%Y0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "4")])
+ [(set_attr "length" "4")])
(define_insn "*insv_si_1_n_lshiftrt"
[(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+r")
@@ -2886,8 +2844,7 @@
&& INTVAL (operands[1]) < 16
&& INTVAL (operands[3]) < 16"
"bld\\t%Z3,%Y2\;bst\\t%Z1,%Y0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "4")])
+ [(set_attr "length" "4")])
(define_insn "*insv_si_1_n_lshiftrt_16"
[(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+r")
@@ -2898,8 +2855,7 @@
"(TARGET_H8300H || TARGET_H8300S)
&& INTVAL (operands[1]) < 16"
"rotr.w\\t%e2\;rotl.w\\t%e2\;bst\\t%Z1,%Y0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "6")])
+ [(set_attr "length" "6")])
(define_insn "*insv_si_8_8"
[(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+r")
@@ -2908,8 +2864,7 @@
(match_operand:SI 1 "register_operand" "r"))]
"TARGET_H8300H || TARGET_H8300S"
"mov.b\\t%w1,%x0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "2")])
+ [(set_attr "length" "2")])
(define_insn "*insv_si_8_8_lshiftrt_8"
[(set (zero_extract:SI (match_operand:SI 0 "register_operand" "+r")
@@ -2919,8 +2874,7 @@
(const_int 8)))]
"TARGET_H8300H || TARGET_H8300S"
"mov.b\\t%x1,%x0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "2")])
+ [(set_attr "length" "2")])
;; extzv:SI
@@ -3035,8 +2989,7 @@
operands[3] = GEN_INT (exact_log2 (INTVAL (operands[3])));
return \"shll.l\\t%S0\;xor.l\\t%S0,%S0\;bst\\t%Z3,%Y0\";
}"
- [(set_attr "length" "8")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "8")])
(define_insn_and_split "*andsi3_lshiftrt_9_sb"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -3065,8 +3018,7 @@
(match_operand:SI 2 "register_operand" "0")))]
"TARGET_H8300H || TARGET_H8300S"
"add.w\\t%f1,%e0"
- [(set_attr "length" "2")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "2")])
(define_insn "*addsi3_lshiftrt_16_zexthi"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -3075,8 +3027,7 @@
(zero_extend:SI (match_operand:HI 2 "register_operand" "0"))))]
"TARGET_H8300H || TARGET_H8300S"
"add.w\\t%e1,%f0\;xor.w\\t%e0,%e0\;rotxl.w\\t%e0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "6")])
+ [(set_attr "length" "6")])
(define_insn_and_split "*addsi3_and_r_1"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -3133,8 +3084,7 @@
(match_operand:HI 3 "register_operand" "0")]))]
""
"%c1.b\\t%X2,%s0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "2")])
+ [(set_attr "length" "2")])
;; [ix]or:SI
@@ -3145,8 +3095,7 @@
(match_operand:SI 3 "register_operand" "0")]))]
""
"%c1.b\\t%X2,%w0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "2")])
+ [(set_attr "length" "2")])
(define_insn "*ixorsi3_zext_hi"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -3155,8 +3104,7 @@
(match_operand:SI 3 "register_operand" "0")]))]
"TARGET_H8300H || TARGET_H8300S"
"%c1.w\\t%T2,%f0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "2")])
+ [(set_attr "length" "2")])
(define_insn "*ixorsi3_ashift_16"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -3166,8 +3114,7 @@
(match_operand:SI 3 "register_operand" "0")]))]
"TARGET_H8300H || TARGET_H8300S"
"%c1.w\\t%f2,%e0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "2")])
+ [(set_attr "length" "2")])
(define_insn "*ixorsi3_lshiftrt_16"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -3177,8 +3124,7 @@
(match_operand:SI 3 "register_operand" "0")]))]
"TARGET_H8300H || TARGET_H8300S"
"%c1.w\\t%e2,%f0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "2")])
+ [(set_attr "length" "2")])
;; ior:HI
@@ -3189,8 +3135,7 @@
(match_operand:HI 2 "register_operand" "0")))]
""
"or.b\\t%s1,%t0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "2")])
+ [(set_attr "length" "2")])
(define_insn "*iorhi3_lshiftrt_8"
[(set (match_operand:HI 0 "register_operand" "=r")
@@ -3199,8 +3144,7 @@
(match_operand:HI 2 "register_operand" "0")))]
""
"or.b\\t%t1,%s0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "2")])
+ [(set_attr "length" "2")])
(define_insn "*iorhi3_two_qi"
[(set (match_operand:HI 0 "register_operand" "=r")
@@ -3209,8 +3153,7 @@
(const_int 8))))]
""
"mov.b\\t%s2,%t0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "2")])
+ [(set_attr "length" "2")])
(define_insn "*iorhi3_two_qi_mem"
[(set (match_operand:HI 0 "register_operand" "=&r")
@@ -3219,8 +3162,7 @@
(const_int 8))))]
""
"mov.b\\t%X2,%t0\;mov.b\\t%X1,%s0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "16")])
+ [(set_attr "length" "16")])
(define_split
[(set (match_operand:HI 0 "register_operand" "")
@@ -3243,8 +3185,7 @@
(const_int 16))))]
"TARGET_H8300H || TARGET_H8300S"
"mov.w\\t%f2,%e0"
- [(set_attr "cc" "clobber")
- (set_attr "length" "2")])
+ [(set_attr "length" "2")])
(define_insn_and_split "*iorsi3_two_qi_zext"
[(set (match_operand:SI 0 "register_operand" "=&r")
@@ -3272,8 +3213,7 @@
(const_int 16))))]
"TARGET_H8300H || TARGET_H8300S"
"mov.w\\t%e2,%f0"
- [(set_attr "length" "2")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "2")])
(define_insn_and_split "*iorsi3_two_qi_sext"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -3299,8 +3239,7 @@
(zero_extend:SI (match_operand:QI 2 "general_operand_src" "r,g>"))))]
"TARGET_H8300H || TARGET_H8300S"
"mov.b\\t%X2,%w0"
- [(set_attr "length" "2,8")
- (set_attr "cc" "clobber,clobber")])
+ [(set_attr "length" "2,8")])
(define_insn "*iorsi3_ashift_31"
[(set (match_operand:SI 0 "register_operand" "=&r")
@@ -3329,8 +3268,7 @@
operands[3] = dstpos;
return \"bld\\t%Z2,%Y1\;bor\\t%Z3,%Y0\;bst\\t%Z3,%Y0\";
}"
- [(set_attr "length" "6")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "6")])
(define_insn "*iorsi3_and_lshiftrt"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -3349,8 +3287,7 @@
operands[3] = dstpos;
return \"bld\\t%Z2,%Y1\;bor\\t%Z3,%Y0\;bst\\t%Z3,%Y0\";
}"
- [(set_attr "length" "6")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "6")])
(define_insn "*iorsi3_zero_extract"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -3361,8 +3298,7 @@
"(TARGET_H8300H || TARGET_H8300S)
&& INTVAL (operands[2]) < 16"
"bld\\t%Z2,%Y1\;bor\\t#0,%w0\;bst\\t#0,%w0"
- [(set_attr "length" "6")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "6")])
(define_insn "*iorsi3_and_lshiftrt_n_sb"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -3372,8 +3308,7 @@
(match_operand:SI 2 "register_operand" "0")))]
"(TARGET_H8300H || TARGET_H8300S)"
"rotl.l\\t%S1\;rotr.l\\t%S1\;bor\\t#1,%w0\;bst\\t#1,%w0"
- [(set_attr "length" "8")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "8")])
(define_insn "*iorsi3_and_lshiftrt_9_sb"
[(set (match_operand:SI 0 "register_operand" "=r")
@@ -3390,8 +3325,7 @@
else
return \"rotl.l\\t%S1\;rotr.l\\t%S1\;xor.w\\t%T3,%T3\;bst\\t#6,%s3\;or.w\\t%T3,%e0\";
}"
- [(set_attr "length" "10")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "10")])
;; Used to OR the exponent of a float.
@@ -3456,8 +3390,7 @@
(const_int 1))))]
"TARGET_H8300H || TARGET_H8300S"
"shlr.l\\t%S0\;bor\\t#0,%w0\;bst\\t#0,%w0"
- [(set_attr "length" "6")
- (set_attr "cc" "clobber")])
+ [(set_attr "length" "6")])
(define_insn_and_split "*iorsi3_ashift_16_ashift_24"
[(set (match_operand:SI 0 "register_operand" "=r")
More information about the Gcc-patches
mailing list