Fwd: Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.?
Richard Earnshaw (lists)
Richard.Earnshaw@arm.com
Mon Nov 18 15:53:00 GMT 2019
- Previous message (by thread): Fwd: Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.?
- Next message (by thread): Fwd: Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.?
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
On 16/11/2019 23:07, Israr Sayed wrote:
> On Tue, Nov 12, 2019 at 10:00:08AM +0000, Richard Earnshaw (lists) wrote:
>> On 11/11/2019 17:49, Israr Sayed wrote:
>>> As per your instructions i tried to build the GCC.I got the following errors:
>>> /mnt/clfs/sources/gcc-build/./gcc/xgcc -B/mnt/clfs/sources/gcc-build/./gcc/ -B/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ -B/mnt/clfs/cross-tools/arm-linux-musleabihf/lib/ -isystem /mnt/clfs/cross-tools/arm-linux-musleabihf/include -isystem /mnt/clfs/cross-tools/arm-linux-musleabihf/sys-include -g -O2 -mthumb -march=armv6s-m -mfloat-abi=soft -O2 -g -O2 -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -W -Wall -Wno-narrowing -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -fno-inline -g -DIN_LIBGCC2 -fbuilding-libgcc -fno-stack-protector -Dinhibit_libc -fPIC -fno-inline -I. -I. -I../../../../.././gcc -I../../../../../../gcc-9.2.0/libgcc -I../../../../../../gcc-9.2.0/libgcc/. -I../../../../../../gcc-9.2.0/libgcc/../gcc -I../../../../../../gcc-9.2.0/libgcc/../include -DHAVE_CC_TLS -o _dvmd_lnx_s.o -MT _dvmd_lnx_s.o -MD -MP -MF _dvmd_lnx_s.dep -DSHARED -DL_dvmd_lnx -xassembler-with-cpp -c ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S
>>> ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S: Assembler messages:
>>> ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1482: Error: bad instruction `arm_func_start aeabi_idiv0'
>>> ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1483: Error: bad instruction `arm_func_start aeabi_ldiv0'
>>> ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1484: Error: selected processor does not support `stmfd sp!,{r1,lr}' in Thumb mode
>>> ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1495: Error: lo register required -- `ldmia sp!,{r1,pc}'
>>> ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1485: Error: invalid operands (.text and *UND* sections) for `-'
>>> ../../../../../../gcc-9.2.0/libgcc/config/arm/lib1funcs.S:1479: Error: can't resolve `.text' {.text section} - `__aeabi_ldiv0' {*UND* section}
>>> /tmp/cc0Si52Z.s: Error: .size expression for __aeabi_ldiv0 does not evaluate to a constant
>>> /tmp/cc0Si52Z.s: Error: .size expression for __aeabi_idiv0 does not evaluate to a constant
>>> make[3]: *** [Makefile:488: _dvmd_lnx_s.o] Error 1
>>> make[3]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/thumb/v6-m/nofp/libgcc'
>>> make[2]: *** [Makefile:1210: multi-do] Error 1
>>> make[2]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/libgcc'
>>> make[1]: *** [Makefile:127: all-multi] Error 2
>>> make[1]: Leaving directory '/mnt/clfs/sources/gcc-build/arm-linux-musleabihf/libgcc'
>>> make: *** [Makefile:12499: all-target-libgcc] Error 2
>>> ----------------------------------------------------------
>>> Config.log:
>>> This file contains any messages produced by compilers while
>>> running configure, to aid debugging if configure makes a mistake.
>>>
>>> It was created by configure, which was
>>> generated by GNU Autoconf 2.69. Invocation command line was
>>>
>>> $ ../gcc-9.2.0/configure --prefix=/mnt/clfs/cross-tools --build=x86_64-cross-linux-gnu --host=x86_64-cross-linux-gnu --target=arm-linux-musleabihf --with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf --disable-nls --disable-shared --without-headers --with-newlib --disable-decimal-float --disable-libgomp --disable-libmudflap --disable-libssp --disable-libatomic --disable-libquadmath --disable-threads --enable-languages=c --enable-multilib --with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src --with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs --with-multilib-list=rmprofile
>>>
>>
>> Sorry, I should have said that these multilib configs have only been tested
>> with bare metal tools (arm-none-eabi). The error you are seeing is because
>> the Linux configurations assume that the Arm instruction set exists and on
>> M-profile devices this is not true.
>>
>> Standard linux configurations also assume the presence of an MMU and no
>> M-profile devices support this.
>>
>> R.
>>
>
> So, both the 2 conditions i.e. ARM Instructions Set and presence of MMU, M and R Profile devices Lack.
> Onyly ARMv7-A Profile Devices have both the capabilities.
> So, My Question is ,Is it then possible to build the GCC with Multilib for A Profile devices,
> Using --with-multilib-list=aprofile ?
>
That should certainly work for bare-metal configurations (eg
arm-none-eabi); that's the intended use case. It may work for
arm-linux-gnueabi configurations as well, but I haven't tried that.
R.
>
>>> ## --------- ##
>>> ## Platform. ##
>>> ## --------- ##
>>>
>>> hostname = hib
>>> uname -m = x86_64
>>> uname -r = 5.3.0-19-generic
>>> uname -s = Linux
>>> uname -v = #20-Ubuntu SMP Fri Oct 18 09:04:39 UTC 2019
>>>
>>> /usr/bin/uname -p = x86_64
>>> /bin/uname -X = unknown
>>>
>>> /bin/arch = x86_64
>>> /usr/bin/arch -k = unknown
>>> /usr/convex/getsysinfo = unknown
>>> /usr/bin/hostinfo = unknown
>>> /bin/machine = unknown
>>> /usr/bin/oslevel = unknown
>>> /bin/universe = unknown
>>>
>>> PATH: /mnt/clfs/cross-tools/bin
>>> PATH: /bin
>>> PATH: /usr/bin
>>>
>>>
>>> ## ----------- ##
>>> ## Core tests. ##
>>> ## ----------- ##
>>>
>>> configure:2348: checking build system type
>>> configure:2362: result: x86_64-cross-linux-gnu
>>> configure:2409: checking host system type
>>> configure:2422: result: x86_64-cross-linux-gnu
>>> configure:2442: checking target system type
>>> configure:2455: result: arm-unknown-linux-musleabihf
>>> configure:2509: checking for a BSD-compatible install
>>> configure:2577: result: /bin/install -c
>>> configure:2588: checking whether ln works
>>> configure:2610: result: yes
>>> configure:2614: checking whether ln -s works
>>> configure:2618: result: yes
>>> configure:2625: checking for a sed that does not truncate output
>>> configure:2689: result: /bin/sed
>>> configure:2698: checking for gawk
>>> configure:2714: found /bin/gawk
>>> configure:2725: result: gawk
>>> configure:3257: checking for libitm support
>>> configure:3267: result: yes
>>> configure:3276: checking for libsanitizer support
>>> configure:3286: result: yes
>>> configure:3295: checking for libvtv support
>>> configure:3305: result: yes
>>> configure:3315: checking for libhsail-rt support
>>> configure:3321: result: no
>>> configure:3406: checking for libphobos support
>>> configure:3416: result: yes
>>> configure:4036: checking for x86_64-cross-linux-gnu-gcc
>>> configure:4066: result: no
>>> configure:4076: checking for gcc
>>> configure:4092: found /bin/gcc
>>> configure:4103: result: gcc
>>> configure:4332: checking for C compiler version
>>> configure:4341: gcc --version >&5
>>> gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008
>>> Copyright (C) 2019 Free Software Foundation, Inc.
>>> This is free software; see the source for copying conditions. There is NO
>>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>>
>>> configure:4352: $? = 0
>>> configure:4341: gcc -v >&5
>>> Using built-in specs.
>>> COLLECT_GCC=gcc
>>> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/9/lto-wrapper
>>> OFFLOAD_TARGET_NAMES=nvptx-none:hsa
>>> OFFLOAD_TARGET_DEFAULT=1
>>> Target: x86_64-linux-gnu
>>> Configured with: ../src/configure -v --with-pkgversion='Ubuntu 9.2.1-9ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-9/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-9 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none,hsa --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
>>> Thread model: posix
>>> gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)
>>> configure:4352: $? = 0
>>> configure:4341: gcc -V >&5
>>> gcc: error: unrecognized command line option '-V'
>>> gcc: fatal error: no input files
>>> compilation terminated.
>>> configure:4352: $? = 1
>>> configure:4341: gcc -qversion >&5
>>> gcc: error: unrecognized command line option '-qversion'; did you mean '--version'?
>>> gcc: fatal error: no input files
>>> compilation terminated.
>>> configure:4352: $? = 1
>>> configure:4372: checking whether the C compiler works
>>> configure:4394: gcc conftest.c >&5
>>> configure:4398: $? = 0
>>> configure:4446: result: yes
>>> configure:4449: checking for C compiler default output file name
>>> configure:4451: result: a.out
>>> configure:4457: checking for suffix of executables
>>> configure:4464: gcc -o conftest conftest.c >&5
>>> configure:4468: $? = 0
>>> configure:4490: result:
>>> configure:4512: checking whether we are cross compiling
>>> configure:4520: gcc -o conftest conftest.c >&5
>>> configure:4524: $? = 0
>>> configure:4531: ./conftest
>>> configure:4535: $? = 0
>>> configure:4523: result: no
>>> configure:4528: checking for suffix of object files
>>> configure:4550: gcc -c conftest.c >&5
>>> configure:4554: $? = 0
>>> configure:4575: result: o
>>> configure:4579: checking whether we are using the GNU C compiler
>>> configure:4598: gcc -c conftest.c >&5
>>> configure:4598: $? = 0
>>> configure:4607: result: yes
>>> configure:4616: checking whether gcc accepts -g
>>> configure:4636: gcc -c -g conftest.c >&5
>>> configure:4636: $? = 0
>>> configure:4677: result: yes
>>> configure:4694: checking for gcc option to accept ISO C89
>>> configure:4757: gcc -c -g -O2 conftest.c >&5
>>> configure:4757: $? = 0
>>> configure:4770: result: none needed
>>> configure:4804: checking for x86_64-cross-linux-gnu-g++
>>> configure:4834: result: no
>>> configure:4804: checking for x86_64-cross-linux-gnu-c++
>>> configure:4834: result: no
>>> configure:4804: checking for x86_64-cross-linux-gnu-gpp
>>> configure:4834: result: no
>>> configure:4804: checking for x86_64-cross-linux-gnu-aCC
>>> configure:4834: result: no
>>> configure:4804: checking for x86_64-cross-linux-gnu-CC
>>> configure:4834: result: no
>>> configure:4804: checking for x86_64-cross-linux-gnu-cxx
>>> configure:4834: result: no
>>> configure:4804: checking for x86_64-cross-linux-gnu-cc++
>>> configure:4834: result: no
>>> configure:4804: checking for x86_64-cross-linux-gnu-cl.exe
>>> configure:4834: result: no
>>> configure:4804: checking for x86_64-cross-linux-gnu-FCC
>>> configure:4834: result: no
>>> configure:4804: checking for x86_64-cross-linux-gnu-KCC
>>> configure:4834: result: no
>>> configure:4804: checking for x86_64-cross-linux-gnu-RCC
>>> configure:4834: result: no
>>> configure:4804: checking for x86_64-cross-linux-gnu-xlC_r
>>> configure:4834: result: no
>>> configure:4804: checking for x86_64-cross-linux-gnu-xlC
>>> configure:4834: result: no
>>> configure:4848: checking for g++
>>> configure:4864: found /bin/g++
>>> configure:4875: result: g++
>>> configure:4902: checking for C++ compiler version
>>> configure:4911: g++ --version >&5
>>> g++ (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008
>>> Copyright (C) 2019 Free Software Foundation, Inc.
>>> This is free software; see the source for copying conditions. There is NO
>>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>>
>>> configure:4922: $? = 0
>>> configure:4911: g++ -v >&5
>>> Using built-in specs.
>>> COLLECT_GCC=g++
>>> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/9/lto-wrapper
>>> OFFLOAD_TARGET_NAMES=nvptx-none:hsa
>>> OFFLOAD_TARGET_DEFAULT=1
>>> Target: x86_64-linux-gnu
>>> Configured with: ../src/configure -v --with-pkgversion='Ubuntu 9.2.1-9ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-9/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,gm2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-9 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --with-target-system-zlib=auto --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none,hsa --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
>>> Thread model: posix
>>> gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)
>>> configure:4922: $? = 0
>>> configure:4911: g++ -V >&5
>>> g++: error: unrecognized command line option '-V'
>>> g++: fatal error: no input files
>>> compilation terminated.
>>> configure:4922: $? = 1
>>> configure:4911: g++ -qversion >&5
>>> g++: error: unrecognized command line option '-qversion'; did you mean '--version'?
>>> g++: fatal error: no input files
>>> compilation terminated.
>>> configure:4922: $? = 1
>>> configure:4926: checking whether we are using the GNU C++ compiler
>>> configure:4945: g++ -c conftest.cpp >&5
>>> configure:4945: $? = 0
>>> configure:4954: result: yes
>>> configure:4963: checking whether g++ accepts -g
>>> configure:4983: g++ -c -g conftest.cpp >&5
>>> configure:4983: $? = 0
>>> configure:5024: result: yes
>>> configure:5073: checking whether g++ accepts -static-libstdc++ -static-libgcc
>>> configure:5090: g++ -o conftest -g -O2 -static-libstdc++ -static-libgcc conftest.cpp >&5
>>> configure:5090: $? = 0
>>> configure:5091: result: yes
>>> configure:5115: checking for x86_64-cross-linux-gnu-gnatbind
>>> configure:5145: result: no
>>> configure:5155: checking for gnatbind
>>> configure:5185: result: no
>>> configure:5207: checking for x86_64-cross-linux-gnu-gnatmake
>>> configure:5237: result: no
>>> configure:5247: checking for gnatmake
>>> configure:5277: result: no
>>> configure:5296: checking whether compiler driver understands Ada
>>> configure:5319: result: no
>>> configure:5328: checking how to compare bootstrapped objects
>>> configure:5353: result: cmp --ignore-initial=16 $$f1 $$f2
>>> configure:5413: checking for objdir
>>> configure:5428: result: .libs
>>> configure:5976: checking for isl 0.15 or later
>>> configure:5989: gcc -o conftest -g -O2 -I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src -I$$s/mpc/src -lisl -L$$r/$(HOST_SUBDIR)/gmp/.libs -L/mnt/clfs/sources/gcc-build/mpfr/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp conftest.c -lisl -lgmp >&5
>>> conftest.c:10:10: fatal error: isl/schedule.h: No such file or directory
>>> 10 | #include <isl/schedule.h>
>>> | ^~~~~~~~~~~~~~~~
>>> compilation terminated.
>>> configure:5989: $? = 1
>>> configure: failed program was:
>>> | /* confdefs.h */
>>> | #define PACKAGE_NAME ""
>>> | #define PACKAGE_TARNAME ""
>>> | #define PACKAGE_VERSION ""
>>> | #define PACKAGE_STRING ""
>>> | #define PACKAGE_BUGREPORT ""
>>> | #define PACKAGE_URL ""
>>> | #define LT_OBJDIR ".libs/"
>>> | /* end confdefs.h. */
>>> | #include <isl/schedule.h>
>>> | int
>>> | main ()
>>> | {
>>> | isl_options_set_schedule_serialize_sccs (NULL, 0);
>>> | ;
>>> | return 0;
>>> | }
>>> configure:5996: result: no
>>> configure:6000: result: required isl version is 0.15 or later
>>> configure:7093: checking for default BUILD_CONFIG
>>> configure:7125: result:
>>> configure:7130: checking for --enable-vtable-verify
>>> configure:7143: result: no
>>> configure:7744: checking for bison
>>> configure:7760: found /bin/bison
>>> configure:7771: result: bison -y
>>> configure:7791: checking for bison
>>> configure:7807: found /bin/bison
>>> configure:7818: result: bison
>>> configure:7838: checking for gm4
>>> configure:7868: result: no
>>> configure:7838: checking for gnum4
>>> configure:7868: result: no
>>> configure:7838: checking for m4
>>> configure:7854: found /bin/m4
>>> configure:7865: result: m4
>>> configure:7885: checking for flex
>>> configure:7901: found /bin/flex
>>> configure:7912: result: flex
>>> configure:7933: checking for flex
>>> configure:7949: found /bin/flex
>>> configure:7960: result: flex
>>> configure:7980: checking for makeinfo
>>> configure:7996: found /bin/makeinfo
>>> configure:8007: result: makeinfo
>>> configure:8041: checking for expect
>>> configure:8057: found /bin/expect
>>> configure:8068: result: expect
>>> configure:8090: checking for runtest
>>> configure:8120: result: no
>>> configure:8196: checking for x86_64-cross-linux-gnu-ar
>>> configure:8226: result: no
>>> configure:8235: checking for ar
>>> configure:8251: found /bin/ar
>>> configure:8262: result: ar
>>> configure:8337: checking for x86_64-cross-linux-gnu-as
>>> configure:8367: result: no
>>> configure:8376: checking for as
>>> configure:8392: found /bin/as
>>> configure:8403: result: as
>>> configure:8478: checking for x86_64-cross-linux-gnu-dlltool
>>> configure:8508: result: no
>>> configure:8517: checking for dlltool
>>> configure:8547: result: no
>>> configure:8619: checking for x86_64-cross-linux-gnu-ld
>>> configure:8649: result: no
>>> configure:8658: checking for ld
>>> configure:8674: found /bin/ld
>>> configure:8685: result: ld
>>> configure:8760: checking for x86_64-cross-linux-gnu-lipo
>>> configure:8790: result: no
>>> configure:8799: checking for lipo
>>> configure:8829: result: no
>>> configure:8901: checking for x86_64-cross-linux-gnu-nm
>>> configure:8931: result: no
>>> configure:8940: checking for nm
>>> configure:8956: found /bin/nm
>>> configure:8967: result: nm
>>> configure:9042: checking for x86_64-cross-linux-gnu-ranlib
>>> configure:9072: result: no
>>> configure:9081: checking for ranlib
>>> configure:9097: found /bin/ranlib
>>> configure:9108: result: ranlib
>>> configure:9178: checking for x86_64-cross-linux-gnu-strip
>>> configure:9208: result: no
>>> configure:9217: checking for strip
>>> configure:9233: found /bin/strip
>>> configure:9244: result: strip
>>> configure:9314: checking for x86_64-cross-linux-gnu-windres
>>> configure:9344: result: no
>>> configure:9353: checking for windres
>>> configure:9383: result: no
>>> configure:9455: checking for x86_64-cross-linux-gnu-windmc
>>> configure:9485: result: no
>>> configure:9494: checking for windmc
>>> configure:9524: result: no
>>> configure:9596: checking for x86_64-cross-linux-gnu-objcopy
>>> configure:9626: result: no
>>> configure:9635: checking for objcopy
>>> configure:9651: found /bin/objcopy
>>> configure:9662: result: objcopy
>>> configure:9737: checking for x86_64-cross-linux-gnu-objdump
>>> configure:9767: result: no
>>> configure:9776: checking for objdump
>>> configure:9792: found /bin/objdump
>>> configure:9803: result: objdump
>>> configure:9878: checking for x86_64-cross-linux-gnu-otool
>>> configure:9908: result: no
>>> configure:9917: checking for otool
>>> configure:9947: result: no
>>> configure:10019: checking for x86_64-cross-linux-gnu-readelf
>>> configure:10049: result: no
>>> configure:10058: checking for readelf
>>> configure:10074: found /bin/readelf
>>> configure:10085: result: readelf
>>> configure:10199: checking for arm-linux-musleabihf-cc
>>> configure:10229: result: no
>>> configure:10199: checking for arm-linux-musleabihf-gcc
>>> configure:10229: result: no
>>> configure:10360: checking for arm-linux-musleabihf-c++
>>> configure:10390: result: no
>>> configure:10360: checking for arm-linux-musleabihf-g++
>>> configure:10390: result: no
>>> configure:10360: checking for arm-linux-musleabihf-cxx
>>> configure:10390: result: no
>>> configure:10360: checking for arm-linux-musleabihf-gxx
>>> configure:10390: result: no
>>> configure:10521: checking for arm-linux-musleabihf-gcc
>>> configure:10551: result: no
>>> configure:10677: checking for arm-linux-musleabihf-gfortran
>>> configure:10707: result: no
>>> configure:10838: checking for arm-linux-musleabihf-gccgo
>>> configure:10868: result: no
>>> configure:10999: checking for arm-linux-musleabihf-gdc
>>> configure:11029: result: no
>>> configure:11129: checking for ar
>>> configure:11147: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar
>>> configure:11159: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar
>>> configure:11359: checking for as
>>> configure:11377: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as
>>> configure:11389: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as
>>> configure:11589: checking for dlltool
>>> configure:11622: result: no
>>> configure:11700: checking for arm-linux-musleabihf-dlltool
>>> configure:11730: result: no
>>> configure:11819: checking for ld
>>> configure:11837: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld
>>> configure:11849: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld
>>> configure:12049: checking for lipo
>>> configure:12082: result: no
>>> configure:12160: checking for arm-linux-musleabihf-lipo
>>> configure:12190: result: no
>>> configure:12279: checking for nm
>>> configure:12297: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm
>>> configure:12309: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm
>>> configure:12509: checking for objcopy
>>> configure:12527: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy
>>> configure:12539: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy
>>> configure:12739: checking for objdump
>>> configure:12757: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump
>>> configure:12769: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump
>>> configure:12969: checking for otool
>>> configure:13002: result: no
>>> configure:13080: checking for arm-linux-musleabihf-otool
>>> configure:13110: result: no
>>> configure:13199: checking for ranlib
>>> configure:13217: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib
>>> configure:13229: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib
>>> configure:13429: checking for readelf
>>> configure:13447: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf
>>> configure:13459: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf
>>> configure:13659: checking for strip
>>> configure:13677: found /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip
>>> configure:13689: result: /mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip
>>> configure:13889: checking for windres
>>> configure:13922: result: no
>>> configure:14000: checking for arm-linux-musleabihf-windres
>>> configure:14030: result: no
>>> configure:14119: checking for windmc
>>> configure:14152: result: no
>>> configure:14230: checking for arm-linux-musleabihf-windmc
>>> configure:14260: result: no
>>> configure:14327: checking where to find the target ar
>>> configure:14355: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
>>> configure:14369: checking where to find the target as
>>> configure:14397: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
>>> configure:14411: checking where to find the target cc
>>> configure:14434: result: just compiled
>>> configure:14453: checking where to find the target c++
>>> configure:14493: result: pre-installed
>>> configure:14498: checking where to find the target c++ for libstdc++
>>> configure:14538: result: pre-installed
>>> configure:14543: checking where to find the target dlltool
>>> configure:14580: result: pre-installed
>>> configure:14585: checking where to find the target gcc
>>> configure:14608: result: just compiled
>>> configure:14627: checking where to find the target gfortran
>>> configure:14667: result: pre-installed
>>> configure:14672: checking where to find the target gccgo
>>> configure:14712: result: pre-installed
>>> configure:14717: checking where to find the target gdc
>>> configure:14757: result: pre-installed
>>> configure:14762: checking where to find the target ld
>>> configure:14790: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
>>> configure:14804: checking where to find the target lipo
>>> configure:14830: result: pre-installed
>>> configure:14835: checking where to find the target nm
>>> configure:14863: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
>>> configure:14877: checking where to find the target objcopy
>>> configure:14905: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
>>> configure:14919: checking where to find the target objdump
>>> configure:14947: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
>>> configure:14961: checking where to find the target otool
>>> configure:14987: result: pre-installed
>>> configure:14992: checking where to find the target ranlib
>>> configure:15020: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
>>> configure:15034: checking where to find the target readelf
>>> configure:15062: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
>>> configure:15076: checking where to find the target strip
>>> configure:15104: result: pre-installed in /mnt/clfs/cross-tools/arm-linux-musleabihf/bin
>>> configure:15118: checking where to find the target windres
>>> configure:15155: result: pre-installed
>>> configure:15160: checking where to find the target windmc
>>> configure:15197: result: pre-installed
>>> configure:15230: checking whether to enable maintainer-specific portions of Makefiles
>>> configure:15239: result: no
>>> configure:15474: creating ./config.status
>>>
>>> ## ---------------------- ##
>>> ## Running config.status. ##
>>> ## ---------------------- ##
>>>
>>> This file was extended by config.status, which was
>>> generated by GNU Autoconf 2.69. Invocation command line was
>>>
>>> CONFIG_FILES =
>>> CONFIG_HEADERS =
>>> CONFIG_LINKS =
>>> CONFIG_COMMANDS =
>>> $ ./config.status
>>>
>>> on hib
>>>
>>> config.status:1016: creating Makefile
>>>
>>> ## ---------------- ##
>>> ## Cache variables. ##
>>> ## ---------------- ##
>>>
>>> ac_cv_build=x86_64-cross-linux-gnu
>>> ac_cv_c_compiler_gnu=yes
>>> ac_cv_cxx_compiler_gnu=yes
>>> ac_cv_env_AR_FOR_TARGET_set=
>>> ac_cv_env_AR_FOR_TARGET_value=
>>> ac_cv_env_AR_set=
>>> ac_cv_env_AR_value=
>>> ac_cv_env_AS_FOR_TARGET_set=
>>> ac_cv_env_AS_FOR_TARGET_value=
>>> ac_cv_env_AS_set=
>>> ac_cv_env_AS_value=
>>> ac_cv_env_CCC_set=
>>> ac_cv_env_CCC_value=
>>> ac_cv_env_CC_FOR_TARGET_set=
>>> ac_cv_env_CC_FOR_TARGET_value=
>>> ac_cv_env_CC_set=
>>> ac_cv_env_CC_value=
>>> ac_cv_env_CFLAGS_set=
>>> ac_cv_env_CFLAGS_value=
>>> ac_cv_env_CPPFLAGS_set=
>>> ac_cv_env_CPPFLAGS_value=
>>> ac_cv_env_CXXFLAGS_set=
>>> ac_cv_env_CXXFLAGS_value=
>>> ac_cv_env_CXX_FOR_TARGET_set=
>>> ac_cv_env_CXX_FOR_TARGET_value=
>>> ac_cv_env_CXX_set=
>>> ac_cv_env_CXX_value=
>>> ac_cv_env_DLLTOOL_FOR_TARGET_set=
>>> ac_cv_env_DLLTOOL_FOR_TARGET_value=
>>> ac_cv_env_DLLTOOL_set=
>>> ac_cv_env_DLLTOOL_value=
>>> ac_cv_env_GCC_FOR_TARGET_set=
>>> ac_cv_env_GCC_FOR_TARGET_value=
>>> ac_cv_env_GDC_FOR_TARGET_set=
>>> ac_cv_env_GDC_FOR_TARGET_value=
>>> ac_cv_env_GFORTRAN_FOR_TARGET_set=
>>> ac_cv_env_GFORTRAN_FOR_TARGET_value=
>>> ac_cv_env_GOC_FOR_TARGET_set=
>>> ac_cv_env_GOC_FOR_TARGET_value=
>>> ac_cv_env_LDFLAGS_set=
>>> ac_cv_env_LDFLAGS_value=
>>> ac_cv_env_LD_FOR_TARGET_set=
>>> ac_cv_env_LD_FOR_TARGET_value=
>>> ac_cv_env_LD_set=
>>> ac_cv_env_LD_value=
>>> ac_cv_env_LIBS_set=
>>> ac_cv_env_LIBS_value=
>>> ac_cv_env_LIPO_FOR_TARGET_set=
>>> ac_cv_env_LIPO_FOR_TARGET_value=
>>> ac_cv_env_LIPO_set=
>>> ac_cv_env_LIPO_value=
>>> ac_cv_env_NM_FOR_TARGET_set=
>>> ac_cv_env_NM_FOR_TARGET_value=
>>> ac_cv_env_NM_set=
>>> ac_cv_env_NM_value=
>>> ac_cv_env_OBJCOPY_FOR_TARGET_set=
>>> ac_cv_env_OBJCOPY_FOR_TARGET_value=
>>> ac_cv_env_OBJCOPY_set=
>>> ac_cv_env_OBJCOPY_value=
>>> ac_cv_env_OBJDUMP_FOR_TARGET_set=
>>> ac_cv_env_OBJDUMP_FOR_TARGET_value=
>>> ac_cv_env_OBJDUMP_set=
>>> ac_cv_env_OBJDUMP_value=
>>> ac_cv_env_OTOOL_FOR_TARGET_set=
>>> ac_cv_env_OTOOL_FOR_TARGET_value=
>>> ac_cv_env_OTOOL_set=
>>> ac_cv_env_OTOOL_value=
>>> ac_cv_env_RANLIB_FOR_TARGET_set=
>>> ac_cv_env_RANLIB_FOR_TARGET_value=
>>> ac_cv_env_RANLIB_set=
>>> ac_cv_env_RANLIB_value=
>>> ac_cv_env_READELF_FOR_TARGET_set=
>>> ac_cv_env_READELF_FOR_TARGET_value=
>>> ac_cv_env_READELF_set=
>>> ac_cv_env_READELF_value=
>>> ac_cv_env_STRIP_FOR_TARGET_set=
>>> ac_cv_env_STRIP_FOR_TARGET_value=
>>> ac_cv_env_STRIP_set=
>>> ac_cv_env_STRIP_value=
>>> ac_cv_env_WINDMC_FOR_TARGET_set=
>>> ac_cv_env_WINDMC_FOR_TARGET_value=
>>> ac_cv_env_WINDMC_set=
>>> ac_cv_env_WINDMC_value=
>>> ac_cv_env_WINDRES_FOR_TARGET_set=
>>> ac_cv_env_WINDRES_FOR_TARGET_value=
>>> ac_cv_env_WINDRES_set=
>>> ac_cv_env_WINDRES_value=
>>> ac_cv_env_build_alias_set=set
>>> ac_cv_env_build_alias_value=x86_64-cross-linux-gnu
>>> ac_cv_env_build_configargs_set=
>>> ac_cv_env_build_configargs_value=
>>> ac_cv_env_host_alias_set=set
>>> ac_cv_env_host_alias_value=x86_64-cross-linux-gnu
>>> ac_cv_env_host_configargs_set=
>>> ac_cv_env_host_configargs_value=
>>> ac_cv_env_target_alias_set=set
>>> ac_cv_env_target_alias_value=arm-linux-musleabihf
>>> ac_cv_env_target_configargs_set=
>>> ac_cv_env_target_configargs_value=
>>> ac_cv_host=x86_64-cross-linux-gnu
>>> ac_cv_objext=o
>>> ac_cv_path_AR_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar
>>> ac_cv_path_AS_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as
>>> ac_cv_path_LD_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld
>>> ac_cv_path_NM_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm
>>> ac_cv_path_OBJCOPY_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy
>>> ac_cv_path_OBJDUMP_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump
>>> ac_cv_path_RANLIB_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib
>>> ac_cv_path_READELF_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf
>>> ac_cv_path_SED=/bin/sed
>>> ac_cv_path_STRIP_FOR_TARGET=/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip
>>> ac_cv_path_install='/bin/install -c'
>>> ac_cv_prog_AR=ar
>>> ac_cv_prog_AS=as
>>> ac_cv_prog_AWK=gawk
>>> ac_cv_prog_BISON=bison
>>> ac_cv_prog_EXPECT=expect
>>> ac_cv_prog_FLEX=flex
>>> ac_cv_prog_LD=ld
>>> ac_cv_prog_LEX=flex
>>> ac_cv_prog_M4=m4
>>> ac_cv_prog_MAKEINFO=makeinfo
>>> ac_cv_prog_NM=nm
>>> ac_cv_prog_OBJCOPY=objcopy
>>> ac_cv_prog_OBJDUMP=objdump
>>> ac_cv_prog_RANLIB=ranlib
>>> ac_cv_prog_READELF=readelf
>>> ac_cv_prog_STRIP=strip
>>> ac_cv_prog_YACC='bison -y'
>>> ac_cv_prog_ac_ct_CC=gcc
>>> ac_cv_prog_ac_ct_CXX=g++
>>> ac_cv_prog_cc_c89=
>>> ac_cv_prog_cc_g=yes
>>> ac_cv_prog_cxx_g=yes
>>> ac_cv_target=arm-unknown-linux-musleabihf
>>> acx_cv_cc_gcc_supports_ada=no
>>> acx_cv_prog_LN=ln
>>> gcc_cv_isl=no
>>> gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
>>> gcc_cv_tool_dirs=/mnt/clfs/cross-tools/libexec/gcc/arm-linux-musleabihf/9.2.0:/mnt/clfs/cross-tools/libexec/gcc/arm-linux-musleabihf:/usr/lib/gcc/arm-linux-musleabihf/9.2.0:/usr/lib/gcc/arm-linux-musleabihf:/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/arm-linux-musleabihf/9.2.0:/mnt/clfs/cross-tools/arm-linux-musleabihf/bin:
>>> gcc_cv_tool_prefix=/mnt/clfs/cross-tools
>>> lt_cv_objdir=.libs
>>>
>>> ## ----------------- ##
>>> ## Output variables. ##
>>> ## ----------------- ##
>>>
>>> AR='ar'
>>> AR_FOR_BUILD='$(AR)'
>>> AR_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ar'
>>> AS='as'
>>> AS_FOR_BUILD='$(AS)'
>>> AS_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/as'
>>> AWK='gawk'
>>> BISON='bison'
>>> BUILD_CONFIG=''
>>> CC='gcc'
>>> CC_FOR_BUILD='$(CC)'
>>> CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
>>> CFLAGS='-g -O2'
>>> CFLAGS_FOR_BUILD='-g -O2'
>>> CFLAGS_FOR_TARGET='-g -O2'
>>> COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as'
>>> COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld'
>>> COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'
>>> CONFIGURE_GDB_TK=''
>>> CPPFLAGS=''
>>> CXX='g++'
>>> CXXFLAGS='-g -O2'
>>> CXXFLAGS_FOR_BUILD='-g -O2'
>>> CXXFLAGS_FOR_TARGET='-g -O2'
>>> CXX_FOR_BUILD='$(CXX)'
>>> CXX_FOR_TARGET='arm-linux-musleabihf-c++'
>>> DEBUG_PREFIX_CFLAGS_FOR_TARGET=''
>>> DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DLT_OBJDIR=\".libs/\"'
>>> DLLTOOL='dlltool'
>>> DLLTOOL_FOR_BUILD='$(DLLTOOL)'
>>> DLLTOOL_FOR_TARGET='arm-linux-musleabihf-dlltool'
>>> ECHO_C=''
>>> ECHO_N='-n'
>>> ECHO_T=''
>>> EXEEXT=''
>>> EXPECT='expect'
>>> FLAGS_FOR_TARGET=' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
>>> FLEX='flex'
>>> GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
>>> GCC_SHLIB_SUBDIR=''
>>> GDB_TK=''
>>> GDC_FOR_BUILD='$(GDC)'
>>> GDC_FOR_TARGET='arm-linux-musleabihf-gdc'
>>> GFORTRAN_FOR_BUILD='$(GFORTRAN)'
>>> GFORTRAN_FOR_TARGET='arm-linux-musleabihf-gfortran'
>>> GNATBIND='no'
>>> GNATMAKE='no'
>>> GOC_FOR_BUILD='$(GOC)'
>>> GOC_FOR_TARGET='arm-linux-musleabihf-gccgo'
>>> INSTALL_DATA='${INSTALL} -m 644'
>>> INSTALL_GDB_TK=''
>>> INSTALL_PROGRAM='${INSTALL}'
>>> INSTALL_SCRIPT='${INSTALL}'
>>> LD='ld'
>>> LDFLAGS=''
>>> LDFLAGS_FOR_BUILD=''
>>> LDFLAGS_FOR_TARGET=''
>>> LD_FOR_BUILD='$(LD)'
>>> LD_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ld'
>>> LEX='flex'
>>> LIBOBJS=''
>>> LIBS=''
>>> LIPO='lipo'
>>> LIPO_FOR_TARGET='arm-linux-musleabihf-lipo'
>>> LN='ln'
>>> LN_S='ln -s'
>>> LTLIBOBJS=''
>>> M4='m4'
>>> MAINT='#'
>>> MAINTAINER_MODE_FALSE=''
>>> MAINTAINER_MODE_TRUE='#'
>>> MAKEINFO='makeinfo'
>>> NM='nm'
>>> NM_FOR_BUILD='$(NM)'
>>> NM_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/nm'
>>> OBJCOPY='objcopy'
>>> OBJCOPY_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objcopy'
>>> OBJDUMP='objdump'
>>> OBJDUMP_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/objdump'
>>> OBJEXT='o'
>>> OTOOL='otool'
>>> OTOOL_FOR_TARGET='arm-linux-musleabihf-otool'
>>> PACKAGE_BUGREPORT=''
>>> PACKAGE_NAME=''
>>> PACKAGE_STRING=''
>>> PACKAGE_TARNAME=''
>>> PACKAGE_URL=''
>>> PACKAGE_VERSION=''
>>> PATH_SEPARATOR=':'
>>> RANLIB='ranlib'
>>> RANLIB_FOR_BUILD='$(RANLIB)'
>>> RANLIB_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/ranlib'
>>> RAW_CXX_FOR_TARGET='arm-linux-musleabihf-c++'
>>> READELF='readelf'
>>> READELF_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/readelf'
>>> RPATH_ENVVAR='LD_LIBRARY_PATH'
>>> RUNTEST='runtest'
>>> SED='/bin/sed'
>>> SHELL='/bin/bash'
>>> STRIP='strip'
>>> STRIP_FOR_TARGET='/mnt/clfs/cross-tools/arm-linux-musleabihf/bin/strip'
>>> SYSROOT_CFLAGS_FOR_TARGET=''
>>> TOPLEVEL_CONFIGURE_ARGUMENTS='../gcc-9.2.0/configure --prefix=/mnt/clfs/cross-tools --build=x86_64-cross-linux-gnu --host=x86_64-cross-linux-gnu --target=arm-linux-musleabihf --with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf --disable-nls --disable-shared --without-headers --with-newlib --disable-decimal-float --disable-libgomp --disable-libmudflap --disable-libssp --disable-libatomic --disable-libquadmath --disable-threads --enable-languages=c --enable-multilib --with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src --with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs --with-multilib-list=rmprofile'
>>> WINDMC='windmc'
>>> WINDMC_FOR_BUILD='$(WINDMC)'
>>> WINDMC_FOR_TARGET='arm-linux-musleabihf-windmc'
>>> WINDRES='windres'
>>> WINDRES_FOR_BUILD='$(WINDRES)'
>>> WINDRES_FOR_TARGET='arm-linux-musleabihf-windres'
>>> YACC='bison -y'
>>> ac_ct_CC='gcc'
>>> ac_ct_CXX='g++'
>>> bindir='${exec_prefix}/bin'
>>> build='x86_64-cross-linux-gnu'
>>> build_alias='x86_64-cross-linux-gnu'
>>> build_configargs=' --cache-file=./config.cache '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src'\'' '\''--with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking'
>>> build_configdirs=' libiberty libcpp fixincludes'
>>> build_cpu='x86_64'
>>> build_libsubdir='build-x86_64-cross-linux-gnu'
>>> build_noncanonical='x86_64-cross-linux-gnu'
>>> build_os='linux-gnu'
>>> build_subdir='build-x86_64-cross-linux-gnu'
>>> build_tooldir='${exec_prefix}/arm-linux-musleabihf'
>>> build_vendor='cross'
>>> compare_exclusions='gcc/cc*-checksum$(objext) | gcc/ada/*tools/*'
>>> configdirs=' intl libiberty zlib libbacktrace libcpp libdecnumber gmp mpfr mpc fixincludes gcc libcc1 lto-plugin'
>>> datadir='${datarootdir}'
>>> datarootdir='${prefix}/share'
>>> do_compare='cmp --ignore-initial=16 $$f1 $$f2'
>>> docdir='${datarootdir}/doc/${PACKAGE}'
>>> dvidir='${docdir}'
>>> exec_prefix='${prefix}'
>>> extra_host_libiberty_configure_flags='--enable-shared'
>>> extra_host_zlib_configure_flags=''
>>> extra_isl_gmp_configure_flags='--with-gmp-builddir=$$r/$(HOST_SUBDIR)/gmp'
>>> extra_liboffloadmic_configure_flags=''
>>> extra_linker_plugin_configure_flags=''
>>> extra_linker_plugin_flags=''
>>> extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs'
>>> extra_mpc_mpfr_configure_flags=''
>>> extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs'
>>> get_gcc_base_ver='cat'
>>> gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src -I$$s/mpc/src '
>>> gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L/mnt/clfs/sources/gcc-build/mpfr/src/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp'
>>> host='x86_64-cross-linux-gnu'
>>> host_alias='x86_64-cross-linux-gnu'
>>> host_configargs=' --cache-file=./config.cache '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-mpfr-include=/mnt/clfs/sources/gcc-build/../gcc-9.2.0/mpfr/src'\'' '\''--with-mpfr-lib=/mnt/clfs/sources/gcc-build/mpfr/src/.libs'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking'
>>> host_cpu='x86_64'
>>> host_noncanonical='x86_64-cross-linux-gnu'
>>> host_os='linux-gnu'
>>> host_shared='no'
>>> host_subdir='.'
>>> host_vendor='cross'
>>> htmldir='${docdir}'
>>> includedir='${prefix}/include'
>>> infodir='${datarootdir}/info'
>>> islinc=''
>>> isllibs=''
>>> libdir='${exec_prefix}/lib'
>>> libexecdir='${exec_prefix}/libexec'
>>> localedir='${datarootdir}/locale'
>>> localstatedir='${prefix}/var'
>>> mandir='${datarootdir}/man'
>>> oldincludedir='/usr/include'
>>> pdfdir='${docdir}'
>>> poststage1_ldflags='-static-libstdc++ -static-libgcc'
>>> poststage1_libs=''
>>> prefix='/mnt/clfs/cross-tools'
>>> program_transform_name='s&^&arm-linux-musleabihf-&'
>>> psdir='${docdir}'
>>> sbindir='${exec_prefix}/sbin'
>>> sharedstatedir='${prefix}/com'
>>> stage1_cflags='-g'
>>> stage1_checking='--enable-checking=yes,types'
>>> stage1_languages='c,lto'
>>> stage1_ldflags='-static-libstdc++ -static-libgcc'
>>> stage1_libs=''
>>> stage2_werror_flag=''
>>> sysconfdir='${prefix}/etc'
>>> target='arm-unknown-linux-musleabihf'
>>> target_alias='arm-linux-musleabihf'
>>> target_configargs='--cache-file=./config.cache --with-cross-host=x86_64-cross-linux-gnu '\''--prefix=/mnt/clfs/cross-tools'\'' '\''--with-sysroot=/mnt/clfs/cross-tools/arm-linux-musleabihf'\'' '\''--disable-nls'\'' '\''--disable-shared'\'' '\''--without-headers'\'' '\''--with-newlib'\'' '\''--disable-decimal-float'\'' '\''--disable-libgomp'\'' '\''--disable-libmudflap'\'' '\''--disable-libssp'\'' '\''--disable-libatomic'\'' '\''--disable-libquadmath'\'' '\''--disable-threads'\'' '\''--enable-multilib'\'' '\''--with-multilib-list=rmprofile'\'' '\''--enable-languages=c,lto'\'' --program-transform-name='\''s&^&arm-linux-musleabihf-&'\'' --disable-option-checking'
>>> target_configdirs=' libgcc'
>>> target_cpu='arm'
>>> target_noncanonical='arm-linux-musleabihf'
>>> target_os='linux-musleabihf'
>>> target_subdir='arm-linux-musleabihf'
>>> target_vendor='unknown'
>>> tooldir='${exec_prefix}/arm-linux-musleabihf'
>>>
>>> ## ------------------- ##
>>> ## File substitutions. ##
>>> ## ------------------- ##
>>>
>>> alphaieee_frag='/dev/null'
>>> host_makefile_frag='/dev/null'
>>> ospace_frag='/dev/null'
>>> serialization_dependencies='serdep.tmp'
>>> target_makefile_frag='../gcc-9.2.0/config/mt-gnu'
>>>
>>> ## ----------- ##
>>> ## confdefs.h. ##
>>> ## ----------- ##
>>>
>>> /* confdefs.h */
>>> #define PACKAGE_NAME ""
>>> #define PACKAGE_TARNAME ""
>>> #define PACKAGE_VERSION ""
>>> #define PACKAGE_STRING ""
>>> #define PACKAGE_BUGREPORT ""
>>> #define PACKAGE_URL ""
>>> #define LT_OBJDIR ".libs/"
>>>
>>> configure: exit 0
>>>
>>> What could be the problem?
>>> ---------------------------------------------------------------
>>> On Mon, Nov 11, 2019 at 01:42:43PM +0000, Richard Earnshaw (lists) wrote:
>>>> On 11/11/2019 13:33, sayed israr wrote:
>>>>> ---------- Forwarded message ---------
>>>>> From: Israr Sayed <sd.israr@gmail.com>
>>>>> Date: Mon, Nov 11, 2019 at 5:38 PM
>>>>> Subject: Re: Is it possible to build Single GCC Executable for armv5,
>>>>> armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.?
>>>>> To: Jonathan Wakely <jwakely.gcc@gmail.com>
>>>>>
>>>>>
>>>>> I am building GCC from sources.Where i can configure it with 2 ways:
>>>>> (1) --with-arch --with-cpu --with-fpu --with-float options .
>>>>> (2) --with-multilib-list= .
>>>>> In --with-multilib-list, we can configure for various combinations of
>>>>> armv*-*-*.
>>>>> For example, I want to build gcc for with arch = armv7, armv7-m, armv7e-m,
>>>>> with float = hard, softfp, soft.
>>>>> with fpu = fpv, fpv4, fpv4-d16 etc..
>>>>> whereas if in configure i mention --with-arch --with-fpu --with-float.That
>>>>> will build GCC for those options only.
>>>>> I have a prebuilt arm GCC binary for STM32F controllers, which is built for
>>>>> whole range of armv7-M, armv7e-m along with FPUs.
>>>>> there configure options show --with-multilib-list=rmprofile.
>>>>> rmprofile is the multilib option for configure.Which is exactly what
>>>>> gcc/config/arm/t-rmprofile file is about.
>>>>> I hope i can explain my question better.
>>>>
>>>> You can configure the compiler with --with-multlib-list=xxx
>>>>
>>>> where xxx is any of "aprofile", "rmprofile" and "aprofile,rmprofile"
>>>>
>>>> If you do this, DO NOT specify any of --with-fpu, --with-cpu, --with-tune or
>>>> --with-arch.
>>>>
>>>> Be warned, the full set of multilibs is LARGE. It requires a fast machine
>>>> and/or a lot of time to build them all.
>>>>
>>>> You can, of course, edit any of the files - the GPL gives you that right,
>>>> but if you do so, you're most likely on your own. The multilib
>>>> configurations are complex and rely heavily on GNU Makefile trickery to
>>>> express all the required combinations.
>>>>
>>>> R.
>>>>
>>>>> ------------------------------------------------------
>>>>>
>>>>> On Mon, Nov 11, 2019 at 11:40:39AM +0000, Jonathan Wakely wrote:
>>>>>> On Sun, 10 Nov 2019 at 11:36, Israr Sayed <sd.israr@gmail.com> wrote:
>>>>>>>
>>>>>>> Digging into the sources of GCC I noticed in files gcc/config/arm/t-*,
>>>>> There are multiple arm target options.
>>>>>>>
>>>>>>> Reading [GCC internal Manual], These are called Target Makefile
>>>>> Fragments, which will be included in main Makefile, like MULTILIB_OPTIONS,
>>>>> MULTILIB_DIRNAMES, MULTILIB_MATCHES, MULTILIB_REQUIRED, MULTILIB_REUSE,
>>>>> MULTILIB_EXTRA_OPTS, MULTILIB_OSDIRNAMES, MULTIARCH_DIRNAME.
>>>>>>>
>>>>>>> What I am not able to understand that how to bring it in at the time of
>>>>> configure.Which option to choose?
>>>>>>>
>>>>>>> More over is it possible to edit those t-* files as per the requirement
>>>>> and how?
>>>>>>> Please Help.
>>>>>>
>>>>>> I don't understand your question. Your email's subject talks about a
>>>>>> single GCC executable for multiple ARM variants, which is supported
>>>>>> automatically. When you configure GCC for an ARM target you can select
>>>>>> the specific processor type using the -march and/or -mcpu options. See
>>>>>> the documentation of command-line options in the GCC manual.
>>>>>>
>>>>>> You don't need to do anything special to use the target makefile
>>>>>> fragments, they're used automatically, as needed.
>>>>
>>
- Previous message (by thread): Fwd: Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.?
- Next message (by thread): Fwd: Is it possible to build Single GCC Executable for armv5, armv6, armv7-{cortex-xx-{A,R,M}},armv8 etc.?
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the Gcc-help
mailing list