Problem compiling gcc 4.2.1 on AIX 5.3

Anant S Athavale asa@isac.gov.in
Mon Jan 28 14:41:00 GMT 2008


Thanks everybody.  Finally I could compile in full gcc 4.2.2 on AIX  
5.3.  It required me to install GNU bash and GNU bison to achieve it.

I ran normal configure without any options.  And make went through.   
It took several hours on my p610 system for to finish compiling.

Thanks a lot again for pointing me towards solving my problem.

Regards,
ANANT.

----- Message from T.Mittelstaedt@cadenas.de ---------
     Date: Thu, 17 Jan 2008 10:05:05 +0100
     From: Thomas Mittelstaedt <T.Mittelstaedt@cadenas.de>
Reply-To: Thomas Mittelstaedt <T.Mittelstaedt@cadenas.de>
  Subject: Re: Problem compiling gcc 4.2.1 on AIX 5.3
       To: Anant Athavale <asa@isac.gov.in>
       Cc: gcc-help@gcc.gnu.org


> Anant,
>
> How did you configure gcc?
>
> I recently built version gcc 4.2.2 on aix 5.2 with the following configure
>
>
> ../gcc-4.2.2/configure   --enable-version-specific-runtime-libs
> --enable-static --enable-shared --enable-threads
> --prefix=/opt/gcc-4.2.2 --without-gnu-ld --disable-nls --with-pic
> --disable-symvers --enable-symvers=no --enable-languages=c,c++,objc
>
> then built with:
> make CFLAGS='-O' LIBCFLAGS='-g -O2' LIBCXXFLAGS='-g -O2
> -fno-implicit-templates' bootstrap
>
> You may also consider to set environment variable CONFIG_SHELL to the
> full path of bash like
> CONFIG_SHELL=/usr/local/bin/bash
> At least when building on hp, it also proved to be useful to set CC to
> the full path of the bootstrap compiler like
> CC=/opt/gcc-3.2.1/bin/gcc
>
> Hope that gets you going. You also should use a gnu tar version higher
> than 1.13 to untar the sources and gnu make, of course.
> I used version 3.79.1.
>
> thomas
>
>
>
> Anant Athavale schrieb:
>> gcc compilation fails with the following error AIX 5.3
>>
>> ---------------------------------------------------------
>> make[3]: Entering directory `/tmp/gcc-4.2.1/host-powerpc-ibm-aix/libiberty'
>> make[4]: Entering directory    
>> `/tmp/gcc-4.2.1/host-powerpc-ibm-aix/libiberty/testsuite'
>> make[4]: Nothing to be done for `all'.
>> make[4]: Leaving directory    
>> `/tmp/gcc-4.2.1/host-powerpc-ibm-aix/libiberty/testsuite'
>> make[3]: Leaving directory `/tmp/gcc-4.2.1/host-powerpc-ibm-aix/libiberty'
>> make[3]: Entering directory `/tmp/gcc-4.2.1/host-powerpc-ibm-aix/intl'
>> make[3]: Nothing to be done for `all'.
>> make[3]: Leaving directory `/tmp/gcc-4.2.1/host-powerpc-ibm-aix/intl'
>> make[3]: Entering directory `/tmp/gcc-4.2.1/build-powerpc-ibm-aix/libiberty'
>> make[4]: Entering directory    
>> `/tmp/gcc-4.2.1/build-powerpc-ibm-aix/libiberty/testsuite'
>> make[4]: Nothing to be done for `all'.
>> make[4]: Leaving directory    
>> `/tmp/gcc-4.2.1/build-powerpc-ibm-aix/libiberty/testsuite'
>> make[3]: Leaving directory `/tmp/gcc-4.2.1/build-powerpc-ibm-aix/libiberty'
>> make[3]: Entering directory   
>> `/tmp/gcc-4.2.1/build-powerpc-ibm-aix/fixincludes'
>> make[3]: Nothing to be done for `all'.
>> make[3]: Leaving directory   
>> `/tmp/gcc-4.2.1/build-powerpc-ibm-aix/fixincludes'
>> make[3]: Entering directory `/tmp/gcc-4.2.1/host-powerpc-ibm-aix/zlib'
>> true "AR_FLAGS=rc" "CC_FOR_BUILD=gcc" "CFLAGS=-g    
>> -fkeep-inline-functions" "CXXFLAGS=-g -O2" "CFLAGS_FOR_BUILD=-g   
>> -O2"  "CFLAGS_FOR_TARGET=-O2 -g -O2 "   
>> "INSTALL=/tmp/gcc-4.2.1/install-sh -c"   
>> "INSTALL_DATA=/tmp/gcc-4.2.1/install-sh -c -m 644"    
>> "INSTALL_PROGRAM=/tmp/gcc-4.2.1/install-sh -c"    
>> "INSTALL_SCRIPT=/tmp/gcc-4.2.1/install-sh -c"   
>> "LDFLAGS=-Wl,-bbigtoc"  "LIBCFLAGS=-g -fkeep-inline-functions"   
>> "LIBCFLAGS_FOR_TARGET=-O2 -g  -O2 " "MAKE=make"   
>> "MAKEINFO=/tmp/gcc-4.2.1/missing makeinfo  --split-size=5000000   
>> --split-size=5000000 --split-size=5000000 "  "PICFLAG="   
>> "PICFLAG_FOR_TARGET=" "SHELL=/bin/sh" "EXPECT=expect"    
>> "RUNTEST=runtest" "RUNTESTFLAGS=" "exec_prefix=/usr/local"    
>> "infodir=/usr/local/info" "libdir=/usr/local/lib"   
>> "prefix=/usr/local"  "tooldir=/usr/local/powerpc-ibm-aix" "AR=ar"   
>> "AS=as" "CC=gcc"  "CXX=c++" "LD=ld" "LIBCFLAGS=-g   
>> -fkeep-inline-functions" "NM=nm"  "PICFLAG=" "RANLIB=ranlib"   
>> "DESTDIR=" DO=all multi-do # make
>> make[3]: Leaving directory `/tmp/gcc-4.2.1/host-powerpc-ibm-aix/zlib'
>> make[3]: Entering directory `/tmp/gcc-4.2.1/host-powerpc-ibm-aix/libcpp'
>> make[3]: Nothing to be done for `all'.
>> make[3]: Leaving directory `/tmp/gcc-4.2.1/host-powerpc-ibm-aix/libcpp'
>> make[3]: Entering directory   
>> `/tmp/gcc-4.2.1/host-powerpc-ibm-aix/libdecnumber'
>> make[3]: Nothing to be done for `all'.
>> make[3]: Leaving directory   
>> `/tmp/gcc-4.2.1/host-powerpc-ibm-aix/libdecnumber'
>> make[3]: Entering directory `/tmp/gcc-4.2.1/host-powerpc-ibm-aix/gcc'
>> make[3]: *** No rule to make target `all'.  Stop.
>> make[3]: Leaving directory `/tmp/gcc-4.2.1/host-powerpc-ibm-aix/gcc'
>> make[2]: *** [all-stage1-gcc] Error 2
>> make[2]: Leaving directory `/tmp/gcc-4.2.1'
>> make[1]: *** [stage1-bubble] Error 2
>> make[1]: Leaving directory `/tmp/gcc-4.2.1'
>> make: *** [all] Error 2
>> ---------------------------------------------------
>>
>> I searched internet for the same, but some suggested use gnu tar to  
>>   untar the gcc source file.tar.  Some said use gmake. Even after   
>> using  both, I getting this error.
>>
>> Please suggest how do I proceed.  The system already has older   
>> version of gcc installed ver 4.1.1.
>>
>> Regards,
>>
>> Anant Athavale.
>>


----- End message from T.Mittelstaedt@cadenas.de -----



Regards,

Anant Athavale,
Computer and Information Group,
ISRO Satellite Centre,
Airport Road,
Bangalore - 560017
INDIA.

Landline: 080-25083512
Cell: 99809 13616

My Free/BusyURL:
http://isacmail2.isac.dos.gov.in/kronolith/fb.php?u=asa%40isac.gov.in



More information about the Gcc-help mailing list