gcc3.4.0 install problem

Muthukumar Ratty muthu@iqmail.net
Fri Sep 17 05:21:00 GMT 2004


And it passed my sanity test too.... it builds a working 2.6.9-rc2-mm1.


On Thu, 16 Sep 2004, Muthukumar Ratty wrote:

>
>
> Got a bit curious and pulled gcc3.4.2. It seems to work :)
>
> [muthu@Sakthi bin]$ pwd
> /devel/gcc3.4.2/out/bin
> [muthu@Sakthi bin]$ ./gcc -v hello.c
> Reading specs from
> /devel/gcc3.4.2/out/lib/gcc/i686-pc-linux-gnu/3.4.2/specs
> Configured with: ../gcc/configure --prefix=/devel/gcc3.4.2/out
> --enable-languages=c,c++
> Thread model: posix
> gcc version 3.4.2
>  /devel/gcc3.4.2/out/libexec/gcc/i686-pc-linux-gnu/3.4.2/cc1 -quiet -v
> hello.c -quiet -dumpbase hello.c -mtune=pentiumpro -auxbase hello -version
> -o /tmp/ccnvxcQo.s
> ignoring nonexistent directory
> "/devel/gcc3.4.2/out/lib/gcc/i686-pc-linux-gnu/3.4.2/../../../../i686-pc-linux-gnu/include"
> #include "..." search starts here:
> #include <...> search starts here:
>  /usr/local/include
>  /devel/gcc3.4.2/out/include
>  /devel/gcc3.4.2/out/lib/gcc/i686-pc-linux-gnu/3.4.2/include
>  /usr/include
> End of search list.
> GNU C version 3.4.2 (i686-pc-linux-gnu)
>         compiled by GNU C version 3.2.2 20030222 (Red Hat Linux 3.2.2-5).
> GGC heuristics: --param ggc-min-expand=47 --param ggc-min-heapsize=31947
>  as -V -Qy -o /tmp/ccI0HQzF.o /tmp/ccnvxcQo.s
> GNU assembler version 2.13.90.0.18 (i386-redhat-linux) using BFD version
> 2.13.90.0.18 20030206
>  /devel/gcc3.4.2/out/libexec/gcc/i686-pc-linux-gnu/3.4.2/collect2
> --eh-frame-hdr -m elf_i386 -dynamic-linker /lib/ld-linux.so.2
> /usr/lib/crt1.o /usr/lib/crti.o
> /devel/gcc3.4.2/out/lib/gcc/i686-pc-linux-gnu/3.4.2/crtbegin.o
> -L/devel/gcc3.4.2/out/lib/gcc/i686-pc-linux-gnu/3.4.2
> -L/devel/gcc3.4.2/out/lib/gcc/i686-pc-linux-gnu/3.4.2/../../..
> /tmp/ccI0HQzF.o -lgcc -lgcc_eh -lc -lgcc -lgcc_eh
> /devel/gcc3.4.2/out/lib/gcc/i686-pc-linux-gnu/3.4.2/crtend.o
> /usr/lib/crtn.o
> [muthu@Sakthi bin]$ ./a.out
> Hello world
> [muthu@Sakthi bin]$
>
>
>
>
> On Thu, 16 Sep 2004, Muthukumar Ratty wrote:
>
> >
> >
> > > The docs say this:
> > >
> > > 	For a native build issue the command make bootstrap.
> > >
> >
> > Yeah, saw that. I am not a gcc developer.. so dont know what is the
> > difference between bootstrap and without. All I can say is
> > "it worked for me for 3.2.2 (tm)" :)
> >
> >
> >
> >
> > > So, it sounds to me like, unless you are building a cross compiler,
> > > "make bootstrap" is indeed the correct command to use when building GCC,
> > > even if you already have another version of it on your system.
> > >
> > > Thanks,
> > > Lyle
> > >
> > >
> > > -----Original Message-----
> > > From: gcc-help-owner@gcc.gnu.org [mailto:gcc-help-owner@gcc.gnu.org] On
> > > Behalf Of Muthukumar Ratty
> > > Sent: Thursday, September 16, 2004 5:46 PM
> > > To: Bras, Gerard
> > > Cc: Muthukumar Ratty; Virender Kashyap; GCC HELP
> > > Subject: RE: gcc3.4.0 install problem
> > >
> > >
> > > I did this a while ago and my info might have been obsoleted :)
> > > Anyway just to upgrade the gcc with same binutils and stuff hwat I did
> > > is,
> > > iirc...
> > >
> > > 1. configure with necessary option
> > > 2. make
> > > 3. make install
> > >
> > > ofcourse you would want this to install in a different location so it
> > > wont
> > > corrupt the pre existing gcc.
> > >
> > >
> > >
> > > On Thu, 16 Sep 2004, Bras, Gerard wrote:
> > >
> > > > This raises an interesting question which the install docs have not
> > > clarified to my satisfaction.  Suppose you already have a working gcc
> > > tool chain and you are doing what the original poster is, getting a
> > > later release up.  Are there make targets more suitable for this?  It
> > > has always seemed a little odd to me to have to do the bootstrap every
> > > time.
> > > >
> > > > gerard
> > > >
> > > > -----Original Message-----
> > > > From: gcc-help-owner@gcc.gnu.org [mailto:gcc-help-owner@gcc.gnu.org]On
> > > > Behalf Of Muthukumar Ratty
> > > > Sent: Thursday, September 16, 2004 11:03 AM
> > > > To: Virender Kashyap
> > > > Cc: GCC HELP
> > > > Subject: Re: gcc3.4.0 install problem
> > > >
> > > >
> > > >
> > > > You dont need bootstrap, unless you want to work on gcc itself.
> > > >
> > > > On Thu, 16 Sep 2004, Virender Kashyap wrote:
> > > >
> > > > > hi
> > > > >    i am not able to install gcc3.4.0 on my comp.
> > > > > i already have gcc3.3 installed on my comp
> > > > >
> > > > > i do following :
> > > > > mkdir objdir
> > > > > cd objdir
> > > > > ../gcc-source/configure --enable-languages=c,c++
> > > > >
> > > > > then i do
> > > > > make bootstrap
> > > > >
> > > > > but here i see the same things being repeated (some checking
> > > messages)and
> > > > > displayed again and again. how many times doess checking happen ?
> > > > >
> > > > >
> > > > >
> > > > > THanks and Regards.
> > > > > Virender
> > > > > ----------------------------------------------
> > > > > Virender Kashyap
> > > > >
> > > >
> > >
> >
>



More information about the Gcc-help mailing list