[gcc r13-9019] gimple-fold: Fix up __builtin_clear_padding lowering [PR115527]
Jakub Jelinek
jakub@gcc.gnu.org
Fri Sep 13 14:08:01 GMT 2024
https://gcc.gnu.org/g:1880ff0dbd814cf1e7dd53dd810f372a94d66d39
commit r13-9019-g1880ff0dbd814cf1e7dd53dd810f372a94d66d39
Author: Jakub Jelinek <jakub@redhat.com>
Date: Wed Jul 17 11:38:33 2024 +0200
gimple-fold: Fix up __builtin_clear_padding lowering [PR115527]
The builtin-clear-padding-6.c testcase fails as clear_padding_type
doesn't correctly recompute the buf->size and buf->off members after
expanding clearing of an array using a runtime loop.
buf->size should be in that case the offset after which it should continue
with next members or padding before them modulo UNITS_PER_WORD and
buf->off that offset minus buf->size. That is what the code was doing,
but with off being the start of the loop cleared array, not its end.
So, the last hunk in gimple-fold.cc fixes that.
When adding the testcase, I've noticed that the
c-c++-common/torture/builtin-clear-padding-* tests, although clearly
written as runtime tests to test the builtins at runtime, didn't have
{ dg-do run } directive and were just compile tests because of that.
When adding that to the tests, builtin-clear-padding-1.c was already
failing without that clear_padding_type hunk too, but
builtin-clear-padding-5.c was still failing even after the change.
That is due to a bug in clear_padding_flush which the patch fixes as
well - when clear_padding_flush is called with full=true (that happens
at the end of the whole __builtin_clear_padding or on those array
padding clears done by a runtime loop), it wants to flush all the pending
padding clearings rather than just some. If it is at the end of the whole
object, it decreases wordsize when needed to make sure the code never writes
including RMW cycles to something outside of the object:
if ((unsigned HOST_WIDE_INT) (buf->off + i + wordsize)
> (unsigned HOST_WIDE_INT) buf->sz)
{
gcc_assert (wordsize > 1);
wordsize /= 2;
i -= wordsize;
continue;
}
but if it is full==true flush in the middle, this doesn't happen, but we
still process just the buffer bytes before the current end. If that end
is not on a wordsize boundary, e.g. on the builtin-clear-padding-5.c test
the last chunk is 2 bytes, '\0', '\xff', i is 16 and end is 18,
nonzero_last might be equal to the end - i, i.e. 2 here, but still all_ones
might be true, so in some spots we just didn't emit any clearing in that
last chunk.
2024-07-17 Jakub Jelinek <jakub@redhat.com>
PR middle-end/115527
* gimple-fold.cc (clear_padding_flush): Introduce endsize
variable and use it instead of wordsize when comparing it against
nonzero_last.
(clear_padding_type): Increment off by sz.
* c-c++-common/torture/builtin-clear-padding-1.c: Add dg-do run
directive.
* c-c++-common/torture/builtin-clear-padding-2.c: Likewise.
* c-c++-common/torture/builtin-clear-padding-3.c: Likewise.
* c-c++-common/torture/builtin-clear-padding-4.c: Likewise.
* c-c++-common/torture/builtin-clear-padding-5.c: Likewise.
* c-c++-common/torture/builtin-clear-padding-6.c: New test.
(cherry picked from commit 8b5919bae11754f4b65a17e63663d3143f9615ac)
Diff:
---
gcc/gimple-fold.cc | 12 ++++++----
.../c-c++-common/torture/builtin-clear-padding-1.c | 1 +
.../c-c++-common/torture/builtin-clear-padding-2.c | 1 +
.../c-c++-common/torture/builtin-clear-padding-3.c | 1 +
.../c-c++-common/torture/builtin-clear-padding-4.c | 4 ++--
.../c-c++-common/torture/builtin-clear-padding-5.c | 1 +
.../c-c++-common/torture/builtin-clear-padding-6.c | 28 ++++++++++++++++++++++
7 files changed, 41 insertions(+), 7 deletions(-)
diff --git a/gcc/gimple-fold.cc b/gcc/gimple-fold.cc
index a61bfcee4e7a..5bdd1d08a265 100644
--- a/gcc/gimple-fold.cc
+++ b/gcc/gimple-fold.cc
@@ -4235,7 +4235,8 @@ clear_padding_flush (clear_padding_struct *buf, bool full)
i -= wordsize;
continue;
}
- for (size_t j = i; j < i + wordsize && j < end; j++)
+ size_t endsize = end - i > wordsize ? wordsize : end - i;
+ for (size_t j = i; j < i + endsize; j++)
{
if (buf->buf[j])
{
@@ -4264,12 +4265,12 @@ clear_padding_flush (clear_padding_struct *buf, bool full)
if (padding_bytes)
{
if (nonzero_first == 0
- && nonzero_last == wordsize
+ && nonzero_last == endsize
&& all_ones)
{
/* All bits are padding and we had some padding
before too. Just extend it. */
- padding_bytes += wordsize;
+ padding_bytes += endsize;
continue;
}
if (all_ones && nonzero_first == 0)
@@ -4309,7 +4310,7 @@ clear_padding_flush (clear_padding_struct *buf, bool full)
if (nonzero_first == wordsize)
/* All bits in a word are 0, there are no padding bits. */
continue;
- if (all_ones && nonzero_last == wordsize)
+ if (all_ones && nonzero_last == endsize)
{
/* All bits between nonzero_first and end of word are padding
bits, start counting padding_bytes. */
@@ -4351,7 +4352,7 @@ clear_padding_flush (clear_padding_struct *buf, bool full)
j = k;
}
}
- if (nonzero_last == wordsize)
+ if (nonzero_last == endsize)
padding_bytes = nonzero_last - zero_last;
continue;
}
@@ -4802,6 +4803,7 @@ clear_padding_type (clear_padding_struct *buf, tree type,
buf->off = 0;
buf->size = 0;
clear_padding_emit_loop (buf, elttype, end, for_auto_init);
+ off += sz;
buf->base = base;
buf->sz = prev_sz;
buf->align = prev_align;
diff --git a/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-1.c b/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-1.c
index 6b01a5614b53..f739963cc4df 100644
--- a/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-1.c
+++ b/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-1.c
@@ -1,4 +1,5 @@
/* PR libstdc++/88101 */
+/* { dg-do run } */
int i1, i2;
long double l1, l2;
diff --git a/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-2.c b/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-2.c
index 1188bc07ed27..099f202ebc75 100644
--- a/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-2.c
+++ b/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-2.c
@@ -1,4 +1,5 @@
/* PR libstdc++/88101 */
+/* { dg-do run } */
typedef int T __attribute__((aligned (16384)));
struct S { char a; short b; long double c; T d; T e; long long f; };
diff --git a/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-3.c b/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-3.c
index edb7c8eb555a..27bf8f6dd734 100644
--- a/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-3.c
+++ b/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-3.c
@@ -1,4 +1,5 @@
/* PR libstdc++/88101 */
+/* { dg-do run } */
union V { char a; signed char b; unsigned char c; };
struct T { char a; int b; union V c; };
diff --git a/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-4.c b/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-4.c
index 9cb202fc690b..ebc589327387 100644
--- a/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-4.c
+++ b/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-4.c
@@ -1,6 +1,6 @@
-/* { dg-require-effective-target alloca } */
-
/* PR libstdc++/88101 */
+/* { dg-do run } */
+/* { dg-require-effective-target alloca } */
struct S { char a; short b; char c; };
diff --git a/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-5.c b/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-5.c
index d5dbafe1c748..3f7d40fddf8c 100644
--- a/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-5.c
+++ b/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-5.c
@@ -1,4 +1,5 @@
/* PR libstdc++/88101 */
+/* { dg-do run } */
struct S { char a; short b; char c; } s1[24], s2[24];
struct T { char a; long long b; char c; struct S d[3]; long long e; char f; } t1, t2;
diff --git a/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-6.c b/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-6.c
new file mode 100644
index 000000000000..db1f00eca737
--- /dev/null
+++ b/gcc/testsuite/c-c++-common/torture/builtin-clear-padding-6.c
@@ -0,0 +1,28 @@
+/* PR middle-end/115527 */
+/* { dg-do run } */
+
+struct T { struct S { double a; signed char b; long c; } d[3]; int e; } t1, t2;
+
+__attribute__((noipa)) void
+foo (struct T *t)
+{
+ for (int i = 0; i < 3; ++i)
+ {
+ t->d[i].a = 1. + 3 * i;
+ t->d[i].b = 2 + 3 * i;
+ t->d[i].c = 3 + 3 * i;
+ }
+ t->e = 10;
+}
+
+int
+main ()
+{
+ __builtin_memset (&t2, -1, sizeof (t2));
+ foo (&t1);
+ foo (&t2);
+ __builtin_clear_padding (&t2);
+ if (__builtin_memcmp (&t1, &t2, sizeof (t1)))
+ __builtin_abort ();
+ return 0;
+}
More information about the Gcc-cvs
mailing list