[gcc r14-8482] libatomic: Enable LSE128 128-bit atomics for Armv9.4-a

Victor Do Nascimento victorldn@gcc.gnu.org
Sun Jan 28 20:10:11 GMT 2024


https://gcc.gnu.org/g:5ad64d76c05faf426b21e60a148f0b34457ee8e5

commit r14-8482-g5ad64d76c05faf426b21e60a148f0b34457ee8e5
Author: Victor Do Nascimento <victor.donascimento@arm.com>
Date:   Tue Aug 1 11:07:56 2023 +0100

    libatomic: Enable LSE128 128-bit atomics for Armv9.4-a
    
    The armv9.4-a architectural revision adds three new atomic operations
    associated with the LSE128 feature:
    
      * LDCLRP - Atomic AND NOT (bitclear) of a location with 128-bit
      value held in a pair of registers, with original data loaded into
      the same 2 registers.
      * LDSETP - Atomic OR (bitset) of a location with 128-bit value held
      in a pair of registers, with original data loaded into the same 2
      registers.
      * SWPP - Atomic swap of one 128-bit value with 128-bit value held
      in a pair of registers.
    
    It is worth noting that in keeping with existing 128-bit atomic
    operations in `atomic_16.S', we have chosen to merge certain
    less-restrictive orderings into more restrictive ones.  This is done
    to minimize the number of branches in the atomic functions, minimizing
    both the likelihood of branch mispredictions and, in keeping code
    small, limit the need for extra fetch cycles.
    
    Past benchmarking has revealed that acquire is typically slightly
    faster than release (5-10%), such that for the most frequently used
    atomics (CAS and SWP) it makes sense to add support for acquire, as
    well as release.
    
    Likewise, it was identified that combining acquire and release typically
    results in little to no penalty, such that it is of negligible benefit
    to distinguish between release and acquire-release, making the
    combining release/acq_rel/seq_cst a worthwhile design choice.
    
    This patch adds the logic required to make use of these when the
    architectural feature is present and a suitable assembler available.
    
    In order to do this, the following changes are made:
    
      1. Add a configure-time check to check for LSE128 support in the
      assembler.
      2. Edit host-config.h so that when N == 16, nifunc = 2.
      3. Where available due to LSE128, implement the second ifunc, making
      use of the novel instructions.
      4. For atomic functions unable to make use of these new
      instructions, define a new alias which causes the _i1 function
      variant to point ahead to the corresponding _i2 implementation.
    
    libatomic/ChangeLog:
    
            * Makefile.am (AM_CPPFLAGS): add conditional setting of
            -DHAVE_FEAT_LSE128.
            * acinclude.m4 (LIBAT_TEST_FEAT_AARCH64_LSE128): New.
            * config/linux/aarch64/atomic_16.S (LSE128): New macro
            definition.
            (libat_exchange_16): New LSE128 variant.
            (libat_fetch_or_16): Likewise.
            (libat_or_fetch_16): Likewise.
            (libat_fetch_and_16): Likewise.
            (libat_and_fetch_16): Likewise.
            * config/linux/aarch64/host-config.h (IFUNC_COND_2): New.
            (IFUNC_NCOND): Add operand size checking.
            (has_lse2): Renamed from `ifunc1`.
            (has_lse128): New.
            (HWCAP2_LSE128): Likewise.
            * configure.ac: Add call to
            LIBAT_TEST_FEAT_AARCH64_LSE128.
            * configure (ac_subst_vars): Regenerated via autoreconf.
            * Makefile.in: Likewise.
            * auto-config.h.in: Likewise.

Diff:
---
 libatomic/Makefile.am                        |   3 +
 libatomic/Makefile.in                        |   1 +
 libatomic/acinclude.m4                       |  19 +++
 libatomic/auto-config.h.in                   |   3 +
 libatomic/config/linux/aarch64/atomic_16.S   | 170 ++++++++++++++++++++++++++-
 libatomic/config/linux/aarch64/host-config.h |  42 ++++++-
 libatomic/configure                          |  61 +++++++++-
 libatomic/configure.ac                       |   3 +
 8 files changed, 293 insertions(+), 9 deletions(-)

diff --git a/libatomic/Makefile.am b/libatomic/Makefile.am
index cfad90124f94..0623a0bf2d1c 100644
--- a/libatomic/Makefile.am
+++ b/libatomic/Makefile.am
@@ -130,6 +130,9 @@ libatomic_la_LIBADD = $(foreach s,$(SIZES),$(addsuffix _$(s)_.lo,$(SIZEOBJS)))
 ## On a target-specific basis, include alternates to be selected by IFUNC.
 if HAVE_IFUNC
 if ARCH_AARCH64_LINUX
+if ARCH_AARCH64_HAVE_LSE128
+AM_CPPFLAGS	     = -DHAVE_FEAT_LSE128
+endif
 IFUNC_OPTIONS	     = -march=armv8-a+lse
 libatomic_la_LIBADD += $(foreach s,$(SIZES),$(addsuffix _$(s)_1_.lo,$(SIZEOBJS)))
 libatomic_la_SOURCES += atomic_16.S
diff --git a/libatomic/Makefile.in b/libatomic/Makefile.in
index dc2330b91fde..cd48fa213342 100644
--- a/libatomic/Makefile.in
+++ b/libatomic/Makefile.in
@@ -452,6 +452,7 @@ M_SRC = $(firstword $(filter %/$(M_FILE), $(all_c_files)))
 libatomic_la_LIBADD = $(foreach s,$(SIZES),$(addsuffix \
 	_$(s)_.lo,$(SIZEOBJS))) $(am__append_1) $(am__append_3) \
 	$(am__append_4) $(am__append_5)
+@ARCH_AARCH64_HAVE_LSE128_TRUE@@ARCH_AARCH64_LINUX_TRUE@@HAVE_IFUNC_TRUE@AM_CPPFLAGS = -DHAVE_FEAT_LSE128
 @ARCH_AARCH64_LINUX_TRUE@@HAVE_IFUNC_TRUE@IFUNC_OPTIONS = -march=armv8-a+lse
 @ARCH_ARM_LINUX_TRUE@@HAVE_IFUNC_TRUE@IFUNC_OPTIONS = -march=armv7-a+fp -DHAVE_KERNEL64
 @ARCH_I386_TRUE@@HAVE_IFUNC_TRUE@IFUNC_OPTIONS = -march=i586
diff --git a/libatomic/acinclude.m4 b/libatomic/acinclude.m4
index f35ab5b60a50..d4f13174e2c9 100644
--- a/libatomic/acinclude.m4
+++ b/libatomic/acinclude.m4
@@ -83,6 +83,25 @@ AC_DEFUN([LIBAT_TEST_ATOMIC_BUILTIN],[
   ])
 ])
 
+dnl
+dnl Test if the host assembler supports armv9.4-a LSE128 isns.
+dnl
+AC_DEFUN([LIBAT_TEST_FEAT_AARCH64_LSE128],[
+  AC_CACHE_CHECK([for armv9.4-a LSE128 insn support],
+    [libat_cv_have_feat_lse128],[
+    AC_LANG_CONFTEST([AC_LANG_PROGRAM([],[asm(".arch armv9-a+lse128")])])
+    if AC_TRY_EVAL(ac_compile); then
+      eval libat_cv_have_feat_lse128=yes
+    else
+      eval libat_cv_have_feat_lse128=no
+    fi
+    rm -f conftest*
+  ])
+  LIBAT_DEFINE_YESNO([HAVE_FEAT_LSE128], [$libat_cv_have_feat_lse128],
+	[Have LSE128 support for 16 byte integers.])
+  AM_CONDITIONAL([ARCH_AARCH64_HAVE_LSE128], [test x$libat_cv_have_feat_lse128 = xyes])
+])
+
 dnl
 dnl Test if we have __atomic_load and __atomic_store for mode $1, size $2
 dnl
diff --git a/libatomic/auto-config.h.in b/libatomic/auto-config.h.in
index ab3424a759ea..7c78933b07d1 100644
--- a/libatomic/auto-config.h.in
+++ b/libatomic/auto-config.h.in
@@ -105,6 +105,9 @@
 /* Define to 1 if you have the <dlfcn.h> header file. */
 #undef HAVE_DLFCN_H
 
+/* Have LSE128 support for 16 byte integers. */
+#undef HAVE_FEAT_LSE128
+
 /* Define to 1 if you have the <fenv.h> header file. */
 #undef HAVE_FENV_H
 
diff --git a/libatomic/config/linux/aarch64/atomic_16.S b/libatomic/config/linux/aarch64/atomic_16.S
index 33f2f569d067..d4a360a6f781 100644
--- a/libatomic/config/linux/aarch64/atomic_16.S
+++ b/libatomic/config/linux/aarch64/atomic_16.S
@@ -35,12 +35,17 @@
    writes, this will be true when using atomics in actual code.
 
    The libat_<op>_16 entry points are ARMv8.0.
-   The libat_<op>_16_i1 entry points are used when LSE2 is available.  */
-
+   The libat_<op>_16_i1 entry points are used when LSE128 is available.
+   The libat_<op>_16_i2 entry points are used when LSE2 is available.  */
 
+#if HAVE_FEAT_LSE128
+	.arch	armv9-a+lse128
+#else
 	.arch	armv8-a+lse
+#endif
 
-#define LSE2(NAME) 	NAME##_i1
+#define LSE128(NAME) 	NAME##_i1
+#define LSE2(NAME) 	NAME##_i2
 #define CORE(NAME) 	NAME
 
 #define ENTRY_FEAT(NAME, FEAT)  \
@@ -202,6 +207,31 @@ ENTRY (libat_exchange_16)
 END (libat_exchange_16)
 
 
+#if HAVE_FEAT_LSE128
+ENTRY_FEAT (libat_exchange_16, LSE128)
+	mov	tmp0, x0
+	mov	res0, in0
+	mov	res1, in1
+	cbnz	w4, 1f
+
+	/* RELAXED.  */
+	swpp	res0, res1, [tmp0]
+	ret
+1:
+	cmp	w4, ACQUIRE
+	b.hi	2f
+
+	/* ACQUIRE/CONSUME.  */
+	swppa	res0, res1, [tmp0]
+	ret
+
+	/* RELEASE/ACQ_REL/SEQ_CST.  */
+2:	swppal	res0, res1, [tmp0]
+	ret
+END_FEAT (libat_exchange_16, LSE128)
+#endif
+
+
 ENTRY (libat_compare_exchange_16)
 	ldp	exp0, exp1, [x1]
 	cbz	w4, 3f
@@ -395,6 +425,31 @@ ENTRY (libat_fetch_or_16)
 END (libat_fetch_or_16)
 
 
+#if HAVE_FEAT_LSE128
+ENTRY_FEAT (libat_fetch_or_16, LSE128)
+	mov	tmp0, x0
+	mov	res0, in0
+	mov	res1, in1
+	cbnz	w4, 1f
+
+	/* RELAXED.  */
+	ldsetp	res0, res1, [tmp0]
+	ret
+1:
+	cmp	w4, ACQUIRE
+	b.hi	2f
+
+	/* ACQUIRE/CONSUME.  */
+	ldsetpa	res0, res1, [tmp0]
+	ret
+
+	/* RELEASE/ACQ_REL/SEQ_CST.  */
+2:	ldsetpal	res0, res1, [tmp0]
+	ret
+END_FEAT (libat_fetch_or_16, LSE128)
+#endif
+
+
 ENTRY (libat_or_fetch_16)
 	mov	x5, x0
 	cbnz	w4, 2f
@@ -417,6 +472,36 @@ ENTRY (libat_or_fetch_16)
 END (libat_or_fetch_16)
 
 
+#if HAVE_FEAT_LSE128
+ENTRY_FEAT (libat_or_fetch_16, LSE128)
+	cbnz	w4, 1f
+	mov	tmp0, in0
+	mov	tmp1, in1
+
+	/* RELAXED.  */
+	ldsetp	in0, in1, [x0]
+	orr	res0, in0, tmp0
+	orr	res1, in1, tmp1
+	ret
+1:
+	cmp	w4, ACQUIRE
+	b.hi	2f
+
+	/* ACQUIRE/CONSUME.  */
+	ldsetpa	in0, in1, [x0]
+	orr	res0, in0, tmp0
+	orr	res1, in1, tmp1
+	ret
+
+	/* RELEASE/ACQ_REL/SEQ_CST.  */
+2:	ldsetpal	in0, in1, [x0]
+	orr	res0, in0, tmp0
+	orr	res1, in1, tmp1
+	ret
+END_FEAT (libat_or_fetch_16, LSE128)
+#endif
+
+
 ENTRY (libat_fetch_and_16)
 	mov	x5, x0
 	cbnz	w4, 2f
@@ -439,6 +524,32 @@ ENTRY (libat_fetch_and_16)
 END (libat_fetch_and_16)
 
 
+#if HAVE_FEAT_LSE128
+ENTRY_FEAT (libat_fetch_and_16, LSE128)
+	mov	tmp0, x0
+	mvn	res0, in0
+	mvn	res1, in1
+	cbnz	w4, 1f
+
+	/* RELAXED.  */
+	ldclrp	res0, res1, [tmp0]
+	ret
+
+1:
+	cmp	w4, ACQUIRE
+	b.hi	2f
+
+	/* ACQUIRE/CONSUME.  */
+	ldclrpa res0, res1, [tmp0]
+	ret
+
+	/* RELEASE/ACQ_REL/SEQ_CST.  */
+2:	ldclrpal	res0, res1, [tmp0]
+	ret
+END_FEAT (libat_fetch_and_16, LSE128)
+#endif
+
+
 ENTRY (libat_and_fetch_16)
 	mov	x5, x0
 	cbnz	w4, 2f
@@ -461,6 +572,37 @@ ENTRY (libat_and_fetch_16)
 END (libat_and_fetch_16)
 
 
+#if HAVE_FEAT_LSE128
+ENTRY_FEAT (libat_and_fetch_16, LSE128)
+	mvn	tmp0, in0
+	mvn	tmp0, in1
+	cbnz	w4, 1f
+
+	/* RELAXED.  */
+	ldclrp	tmp0, tmp1, [x0]
+	and	res0, tmp0, in0
+	and	res1, tmp1, in1
+	ret
+
+1:
+	cmp	w4, ACQUIRE
+	b.hi	2f
+
+	/* ACQUIRE/CONSUME.  */
+	ldclrpa tmp0, tmp1, [x0]
+	and	res0, tmp0, in0
+	and	res1, tmp1, in1
+	ret
+
+	/* RELEASE/ACQ_REL/SEQ_CST.  */
+2:	ldclrpal	tmp0, tmp1, [x5]
+	and	res0, tmp0, in0
+	and	res1, tmp1, in1
+	ret
+END_FEAT (libat_and_fetch_16, LSE128)
+#endif
+
+
 ENTRY (libat_fetch_xor_16)
 	mov	x5, x0
 	cbnz	w4, 2f
@@ -566,6 +708,28 @@ ENTRY (libat_test_and_set_16)
 END (libat_test_and_set_16)
 
 
+/* Alias entry points which are the same in LSE2 and LSE128.  */
+
+#if !HAVE_FEAT_LSE128
+ALIAS (libat_exchange_16, LSE128, LSE2)
+ALIAS (libat_fetch_or_16, LSE128, LSE2)
+ALIAS (libat_fetch_and_16, LSE128, LSE2)
+ALIAS (libat_or_fetch_16, LSE128, LSE2)
+ALIAS (libat_and_fetch_16, LSE128, LSE2)
+#endif
+ALIAS (libat_load_16, LSE128, LSE2)
+ALIAS (libat_store_16, LSE128, LSE2)
+ALIAS (libat_compare_exchange_16, LSE128, LSE2)
+ALIAS (libat_fetch_add_16, LSE128, LSE2)
+ALIAS (libat_add_fetch_16, LSE128, LSE2)
+ALIAS (libat_fetch_sub_16, LSE128, LSE2)
+ALIAS (libat_sub_fetch_16, LSE128, LSE2)
+ALIAS (libat_fetch_xor_16, LSE128, LSE2)
+ALIAS (libat_xor_fetch_16, LSE128, LSE2)
+ALIAS (libat_fetch_nand_16, LSE128, LSE2)
+ALIAS (libat_nand_fetch_16, LSE128, LSE2)
+ALIAS (libat_test_and_set_16, LSE128, LSE2)
+
 /* Alias entry points which are the same in baseline and LSE2.  */
 
 ALIAS (libat_exchange_16, LSE2, CORE)
diff --git a/libatomic/config/linux/aarch64/host-config.h b/libatomic/config/linux/aarch64/host-config.h
index 8fd4fe3321ad..1bc7d8392322 100644
--- a/libatomic/config/linux/aarch64/host-config.h
+++ b/libatomic/config/linux/aarch64/host-config.h
@@ -37,14 +37,17 @@ typedef struct __ifunc_arg_t {
 
 #ifdef HWCAP_USCAT
 # if N == 16
-#  define IFUNC_COND_1	ifunc1 (hwcap, features)
+#  define IFUNC_COND_1		(has_lse128 (hwcap, features))
+#  define IFUNC_COND_2		(has_lse2 (hwcap, features))
+#  define IFUNC_NCOND(N)	2
 # else
-#  define IFUNC_COND_1	(hwcap & HWCAP_ATOMICS)
+#  define IFUNC_COND_1		(hwcap & HWCAP_ATOMICS)
+#  define IFUNC_NCOND(N)	1
 # endif
 #else
 #  define IFUNC_COND_1	(false)
+#  define IFUNC_NCOND(N)	1
 #endif
-#define IFUNC_NCOND(N)	(1)
 
 #endif /* HAVE_IFUNC */
 
@@ -59,7 +62,7 @@ typedef struct __ifunc_arg_t {
 #define MIDR_PARTNUM(midr)	(((midr) >> 4) & 0xfff)
 
 static inline bool
-ifunc1 (unsigned long hwcap, const __ifunc_arg_t *features)
+has_lse2 (unsigned long hwcap, const __ifunc_arg_t *features)
 {
   if (hwcap & HWCAP_USCAT)
     return true;
@@ -75,6 +78,37 @@ ifunc1 (unsigned long hwcap, const __ifunc_arg_t *features)
 
   return false;
 }
+
+/* LSE128 atomic support encoded in ID_AA64ISAR0_EL1.Atomic,
+   bits[23:20].  The expected value is 0b0011.  Check that.  */
+
+#define AT_FEAT_FIELD(isar0)	(((isar0) >> 20) & 15)
+
+/* Ensure backwards compatibility with glibc <= 2.38.  */
+#ifndef HWCAP2_LSE128
+#define HWCAP2_LSE128		(1UL << 47)
+#endif
+
+static inline bool
+has_lse128 (unsigned long hwcap, const __ifunc_arg_t *features)
+{
+  if (hwcap & _IFUNC_ARG_HWCAP
+      && features->_hwcap2 & HWCAP2_LSE128)
+    return true;
+  /* A 0 HWCAP2_LSE128 bit may be just as much a sign of missing HWCAP2 bit
+     support in older kernels as it is of CPU feature absence.  Try fallback
+     method to guarantee LSE128 is not implemented.
+
+     In the absence of HWCAP_CPUID, we are unable to check for LSE128.  */
+  if (!(hwcap & HWCAP_CPUID))
+    return false;
+  unsigned long isar0;
+  asm volatile ("mrs %0, ID_AA64ISAR0_EL1" : "=r" (isar0));
+  if (AT_FEAT_FIELD (isar0) >= 3)
+    return true;
+  return false;
+}
+
 #endif
 
 #include_next <host-config.h>
diff --git a/libatomic/configure b/libatomic/configure
index d579bab96f86..8ab730d80828 100755
--- a/libatomic/configure
+++ b/libatomic/configure
@@ -656,6 +656,8 @@ LIBAT_BUILD_VERSIONED_SHLIB_FALSE
 LIBAT_BUILD_VERSIONED_SHLIB_TRUE
 OPT_LDFLAGS
 SECTION_LDFLAGS
+ARCH_AARCH64_HAVE_LSE128_FALSE
+ARCH_AARCH64_HAVE_LSE128_TRUE
 SYSROOT_CFLAGS_FOR_TARGET
 enable_aarch64_lse
 libtool_VERSION
@@ -11456,7 +11458,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11459 "configure"
+#line 11461 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11562,7 +11564,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11565 "configure"
+#line 11567 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -14697,6 +14699,57 @@ _ACEOF
 
 
 
+# Check for target-specific assembly-level support for atomic operations.
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for armv9.4-a LSE128 insn support" >&5
+$as_echo_n "checking for armv9.4-a LSE128 insn support... " >&6; }
+if ${libat_cv_have_feat_lse128+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+asm(".arch armv9-a+lse128")
+  ;
+  return 0;
+}
+_ACEOF
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+      eval libat_cv_have_feat_lse128=yes
+    else
+      eval libat_cv_have_feat_lse128=no
+    fi
+    rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libat_cv_have_feat_lse128" >&5
+$as_echo "$libat_cv_have_feat_lse128" >&6; }
+
+  yesno=`echo $libat_cv_have_feat_lse128 | tr 'yesno' '1  0 '`
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_FEAT_LSE128 $yesno
+_ACEOF
+
+
+   if test x$libat_cv_have_feat_lse128 = xyes; then
+  ARCH_AARCH64_HAVE_LSE128_TRUE=
+  ARCH_AARCH64_HAVE_LSE128_FALSE='#'
+else
+  ARCH_AARCH64_HAVE_LSE128_TRUE='#'
+  ARCH_AARCH64_HAVE_LSE128_FALSE=
+fi
+
+
+
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
 $as_echo_n "checking whether byte ordering is bigendian... " >&6; }
 if ${ac_cv_c_bigendian+:} false; then :
@@ -15989,6 +16042,10 @@ if test -z "${ENABLE_DARWIN_AT_RPATH_TRUE}" && test -z "${ENABLE_DARWIN_AT_RPATH
   as_fn_error $? "conditional \"ENABLE_DARWIN_AT_RPATH\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
+if test -z "${ARCH_AARCH64_HAVE_LSE128_TRUE}" && test -z "${ARCH_AARCH64_HAVE_LSE128_FALSE}"; then
+  as_fn_error $? "conditional \"ARCH_AARCH64_HAVE_LSE128\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
 
 if test -z "${LIBAT_BUILD_VERSIONED_SHLIB_TRUE}" && test -z "${LIBAT_BUILD_VERSIONED_SHLIB_FALSE}"; then
   as_fn_error $? "conditional \"LIBAT_BUILD_VERSIONED_SHLIB\" was never defined.
diff --git a/libatomic/configure.ac b/libatomic/configure.ac
index 32a2cdb13aee..85824fa7614c 100644
--- a/libatomic/configure.ac
+++ b/libatomic/configure.ac
@@ -206,6 +206,9 @@ LIBAT_FORALL_MODES([LIBAT_HAVE_ATOMIC_CAS])
 LIBAT_FORALL_MODES([LIBAT_HAVE_ATOMIC_FETCH_ADD])
 LIBAT_FORALL_MODES([LIBAT_HAVE_ATOMIC_FETCH_OP])
 
+# Check for target-specific assembly-level support for atomic operations.
+LIBAT_TEST_FEAT_AARCH64_LSE128()
+
 AC_C_BIGENDIAN
 # I don't like the default behaviour of WORDS_BIGENDIAN undefined for LE.
 AH_BOTTOM(


More information about the Gcc-cvs mailing list