-mgpr-32-
Only use the first 32 general purpose registers.
-mgpr-64-
Use all 64 general purpose registers.
-mfpr-32-
Use only the first 32 floating point registers.
-mfpr-64-
Use all 64 floating point registers
-mhard-float-
Use hardware instructions for floating point operations.
-msoft-float-
Use library routines for floating point operations.
-malloc-cc-
Dynamically allocate condition code registers.
-mfixed-cc-
Do not try to dynamically allocate condition code registers, only
use
icc0 and fcc0.
-mdword-
Change ABI to use double word insns.
-mno-dword-
Do not use double word instructions.
-mdouble-
Use floating point double instructions.
-mno-double-
Do not use floating point double instructions.
-mmedia-
Use media instructions.
-mno-media-
Do not use media instructions.
-mmuladd-
Use multiply and add/subtract instructions.
-mno-muladd-
Do not use multiply and add/subtract instructions.
-mfdpic-
Select the FDPIC ABI, that uses function descriptors to represent
pointers to functions. Without any PIC/PIE-related options, it
implies -fPIE. With -fpic or -fpie, it
assumes GOT entries and small data are within a 12-bit range from the
GOT base address; with -fPIC or -fPIE, GOT offsets
are computed with 32 bits.
-minline-plt-
Enable inlining of PLT entries in function calls to functions that are
not known to bind locally. It has no effect without -mfdpic.
It's enabled by default if optimizing for speed and compiling for
shared libraries (i.e., -fPIC or -fpic), or when an
optimization option such as -O3 or above is present in the
command line.
-mTLS-
Assume a large TLS segment when generating thread-local code.
-mtls-
Do not assume a large TLS segment when generating thread-local code.
-mgprel-ro-
Enable the use of
GPREL relocations in the FDPIC ABI for data
that is known to be in read-only sections. It's enabled by default,
except for -fpic or -fpie: even though it may help
make the global offset table smaller, it trades 1 instruction for 4.
With -fPIC or -fPIE, it trades 3 instructions for 4,
one of which may be shared by multiple symbols, and it avoids the need
for a GOT entry for the referenced symbol, so it's more likely to be a
win. If it is not, -mno-gprel-ro can be used to disable it.
-multilib-library-pic-
Link with the (library, not FD) pic libraries. It's implied by
-mlibrary-pic, as well as by -fPIC and
-fpic without -mfdpic. You should never have to use
it explicitly.
-mlinked-fp-
Follow the EABI requirement of always creating a frame pointer whenever
a stack frame is allocated. This option is enabled by default and can
be disabled with -mno-linked-fp.
-mlong-calls-
Use indirect addressing to call functions outside the current
compilation unit. This allows the functions to be placed anywhere
within the 32-bit address space.
-malign-labels-
Try to align labels to an 8-byte boundary by inserting nops into the
previous packet. This option only has an effect when VLIW packing
is enabled. It doesn't create new packets; it merely adds nops to
existing ones.
-mlibrary-pic-
Generate position-independent EABI code.
-macc-4-
Use only the first four media accumulator registers.
-macc-8-
Use all eight media accumulator registers.
-mpack-
Pack VLIW instructions.
-mno-pack-
Do not pack VLIW instructions.
-mno-eflags-
Do not mark ABI switches in e_flags.
-mcond-move-
Enable the use of conditional-move instructions (default).
This switch is mainly for debugging the compiler and will likely be removed
in a future version.
-mno-cond-move-
Disable the use of conditional-move instructions.
This switch is mainly for debugging the compiler and will likely be removed
in a future version.
-mscc-
Enable the use of conditional set instructions (default).
This switch is mainly for debugging the compiler and will likely be removed
in a future version.
-mno-scc-
Disable the use of conditional set instructions.
This switch is mainly for debugging the compiler and will likely be removed
in a future version.
-mcond-exec-
Enable the use of conditional execution (default).
This switch is mainly for debugging the compiler and will likely be removed
in a future version.
-mno-cond-exec-
Disable the use of conditional execution.
This switch is mainly for debugging the compiler and will likely be removed
in a future version.
-mvliw-branch-
Run a pass to pack branches into VLIW instructions (default).
This switch is mainly for debugging the compiler and will likely be removed
in a future version.
-mno-vliw-branch-
Do not run a pass to pack branches into VLIW instructions.
This switch is mainly for debugging the compiler and will likely be removed
in a future version.
-mmulti-cond-exec-
Enable optimization of
&& and || in conditional execution
(default).
This switch is mainly for debugging the compiler and will likely be removed
in a future version.
-mno-multi-cond-exec-
Disable optimization of
&& and || in conditional execution.
This switch is mainly for debugging the compiler and will likely be removed
in a future version.
-mnested-cond-exec-
Enable nested conditional execution optimizations (default).
This switch is mainly for debugging the compiler and will likely be removed
in a future version.
-mno-nested-cond-exec-
Disable nested conditional execution optimizations.
This switch is mainly for debugging the compiler and will likely be removed
in a future version.
-mtomcat-stats-
Cause gas to print out tomcat statistics.
-mcpu=cpu-
Select the processor type for which to generate code. Possible values are
`frv', `fr550', `tomcat', `fr500', `fr450',
`fr405', `fr400', `fr300' and `simple'.