Next: Environment Variables, Previous: Submodel Options, Up: Invoking GCC [Contents][Index]
gcc
is a driver program. It performs its job by invoking a
sequence of other programs to do the work of compiling, assembling and
linking. GCC interprets its command-line parameters and uses these to
deduce which programs it should invoke, and which command-line options
it ought to place on their command lines. This behavior is controlled
by spec strings. In most cases there is one spec string for each
program that GCC can invoke, but a few programs have multiple spec
strings to control their behavior. The spec strings built into GCC can
be overridden by using the -specs= command-line switch to specify
a spec file.
Spec files are plain-text files that are used to construct spec strings. They consist of a sequence of directives separated by blank lines. The type of directive is determined by the first non-whitespace character on the line, which can be one of the following:
%command
Issues a command to the spec file processor. The commands that can appear here are:
%include <file>
Search for file and insert its text at the current point in the specs file.
%include_noerr <file>
Just like ‘%include’, but do not generate an error message if the include file cannot be found.
%rename old_name new_name
Rename the spec string old_name to new_name.
*[spec_name]:
This tells the compiler to create, override or delete the named spec string. All lines after this directive up to the next directive or blank line are considered to be the text for the spec string. If this results in an empty string then the spec is deleted. (Or, if the spec did not exist, then nothing happens.) Otherwise, if the spec does not currently exist a new spec is created. If the spec does exist then its contents are overridden by the text of this directive, unless the first character of that text is the ‘+’ character, in which case the text is appended to the spec.
[suffix]:
Creates a new ‘[suffix] spec’ pair. All lines after this directive and up to the next directive or blank line are considered to make up the spec string for the indicated suffix. When the compiler encounters an input file with the named suffix, it processes the spec string in order to work out how to compile that file. For example:
.ZZ: z-compile -input %i
This says that any input file whose name ends in ‘.ZZ’ should be passed to the program ‘z-compile’, which should be invoked with the command-line switch -input and with the result of performing the ‘%i’ substitution. (See below.)
As an alternative to providing a spec string, the text following a suffix directive can be one of the following:
@language
This says that the suffix is an alias for a known language. This is similar to using the -x command-line switch to GCC to specify a language explicitly. For example:
.ZZ: @c++
Says that .ZZ files are, in fact, C++ source files.
#name
This causes an error messages saying:
name compiler not installed on this system.
GCC already has an extensive list of suffixes built into it. This directive adds an entry to the end of the list of suffixes, but since the list is searched from the end backwards, it is effectively possible to override earlier entries using this technique.
GCC has the following spec strings built into it. Spec files can override these strings or create their own. Note that individual targets can also add their own spec strings to this list.
asm Options to pass to the assembler
asm_final Options to pass to the assembler post-processor
cpp Options to pass to the C preprocessor
cc1 Options to pass to the C compiler
cc1plus Options to pass to the C++ compiler
endfile Object files to include at the end of the link
link Options to pass to the linker
lib Libraries to include on the command line to the linker
libgcc Decides which GCC support library to pass to the linker
linker Sets the name of the linker
predefines Defines to be passed to the C preprocessor
signed_char Defines to pass to CPP to say whether char
is signed
by default
startfile Object files to include at the start of the link
Here is a small example of a spec file:
%rename lib old_lib *lib: --start-group -lgcc -lc -leval1 --end-group %(old_lib)
This example renames the spec called ‘lib’ to ‘old_lib’ and then overrides the previous definition of ‘lib’ with a new one. The new definition adds in some extra command-line options before including the text of the old definition.
Spec strings are a list of command-line options to be passed to their corresponding program. In addition, the spec strings can contain ‘%’-prefixed sequences to substitute variable text or to conditionally insert text into the command line. Using these constructs it is possible to generate quite complex command lines.
Here is a table of all defined ‘%’-sequences for spec strings. Note that spaces are not generated automatically around the results of expanding these sequences. Therefore you can concatenate them together or combine them with constant text in a single argument.
%%
Substitute one ‘%’ into the program name or argument.
%"
Substitute an empty argument.
%i
Substitute the name of the input file being processed.
%b
Substitute the basename for outputs related with the input file being processed. This is often the substring up to (and not including) the last period and not including the directory but, unless %w is active, it expands to the basename for auxiliary outputs, which may be influenced by an explicit output name, and by various other options that control how auxiliary outputs are named.
%B
This is the same as ‘%b’, but include the file suffix (text after the last period). Without %w, it expands to the basename for dump outputs.
%d
Marks the argument containing or following the ‘%d’ as a temporary file name, so that that file is deleted if GCC exits successfully. Unlike ‘%g’, this contributes no text to the argument.
%gsuffix
Substitute a file name that has suffix suffix and is chosen once per compilation, and mark the argument in the same way as ‘%d’. To reduce exposure to denial-of-service attacks, the file name is now chosen in a way that is hard to predict even when previously chosen file names are known. For example, ‘%g.s … %g.o … %g.s’ might turn into ‘ccUVUUAU.s ccXYAXZ12.o ccUVUUAU.s’. suffix matches the regexp ‘[.A-Za-z]*’ or the special string ‘%O’, which is treated exactly as if ‘%O’ had been preprocessed. Previously, ‘%g’ was simply substituted with a file name chosen once per compilation, without regard to any appended suffix (which was therefore treated just like ordinary text), making such attacks more likely to succeed.
%usuffix
Like ‘%g’, but generates a new temporary file name each time it appears instead of once per compilation.
%Usuffix
Substitutes the last file name generated with ‘%usuffix’, generating a new one if there is no such last file name. In the absence of any ‘%usuffix’, this is just like ‘%gsuffix’, except they don’t share the same suffix space, so ‘%g.s … %U.s … %g.s … %U.s’ involves the generation of two distinct file names, one for each ‘%g.s’ and another for each ‘%U.s’. Previously, ‘%U’ was simply substituted with a file name chosen for the previous ‘%u’, without regard to any appended suffix.
%jsuffix
Substitutes the name of the HOST_BIT_BUCKET
, if any, and if it is
writable, and if -save-temps is not used;
otherwise, substitute the name
of a temporary file, just like ‘%u’. This temporary file is not
meant for communication between processes, but rather as a junk
disposal mechanism.
%|suffix
%msuffix
Like ‘%g’, except if -pipe is in effect. In that case
‘%|’ substitutes a single dash and ‘%m’ substitutes nothing at
all. These are the two most common ways to instruct a program that it
should read from standard input or write to standard output. If you
need something more elaborate you can use an ‘%{pipe:X
}’
construct: see for example gcc/fortran/lang-specs.h.
%.SUFFIX
Substitutes .SUFFIX for the suffixes of a matched switch’s args when it is subsequently output with ‘%*’. SUFFIX is terminated by the next space or %.
%w
Marks the argument containing or following the ‘%w’ as the designated output file of this compilation. This puts the argument into the sequence of arguments that ‘%o’ substitutes.
%V
Indicates that this compilation produces no output file.
%o
Substitutes the names of all the output files, with spaces automatically placed around them. You should write spaces around the ‘%o’ as well or the results are undefined. ‘%o’ is for use in the specs for running the linker. Input files whose names have no recognized suffix are not compiled at all, but they are included among the output files, so they are linked.
%O
Substitutes the suffix for object files. Note that this is handled specially when it immediately follows ‘%g, %u, or %U’, because of the need for those to form complete file names. The handling is such that ‘%O’ is treated exactly as if it had already been substituted, except that ‘%g, %u, and %U’ do not currently support additional suffix characters following ‘%O’ as they do following, for example, ‘.o’.
%I
Substitute any of -iprefix (made from GCC_EXEC_PREFIX
),
-isysroot (made from TARGET_SYSTEM_ROOT
),
-isystem (made from COMPILER_PATH
and -B options)
and -imultilib as necessary.
%s
Current argument is the name of a library or startup file of some sort. Search for that file in a standard list of directories and substitute the full name found. The current working directory is included in the list of directories scanned.
%T
Current argument is the name of a linker script. Search for that file in the current list of directories to scan for libraries. If the file is located insert a --script option into the command line followed by the full path name found. If the file is not found then generate an error message. Note: the current working directory is not searched.
%estr
Print str as an error message. str is terminated by a newline. Use this when inconsistent options are detected.
%nstr
Print str as a notice. str is terminated by a newline.
%(name)
Substitute the contents of spec string name at this point.
%x{option}
Accumulate an option for ‘%X’.
%X
Output the accumulated linker options specified by a ‘%x’ spec string.
%Y
Output the accumulated assembler options specified by -Wa.
%Z
Output the accumulated preprocessor options specified by -Wp.
%M
Output multilib_os_dir
.
%R
Output the concatenation of target_system_root
and target_sysroot_suffix
.
%a
Process the asm
spec. This is used to compute the
switches to be passed to the assembler.
%A
Process the asm_final
spec. This is a spec string for
passing switches to an assembler post-processor, if such a program is
needed.
%l
Process the link
spec. This is the spec for computing the
command line passed to the linker. Typically it makes use of the
‘%L %G %S %D and %E’ sequences.
%D
Dump out a -L option for each directory that GCC believes might contain startup files. If the target supports multilibs then the current multilib directory is prepended to each of these paths.
%L
Process the lib
spec. This is a spec string for deciding which
libraries are included on the command line to the linker.
%G
Process the libgcc
spec. This is a spec string for deciding
which GCC support library is included on the command line to the linker.
%S
Process the startfile
spec. This is a spec for deciding which
object files are the first ones passed to the linker. Typically
this might be a file named crt0.o.
%E
Process the endfile
spec. This is a spec string that specifies
the last object files that are passed to the linker.
%C
Process the cpp
spec. This is used to construct the arguments
to be passed to the C preprocessor.
%1
Process the cc1
spec. This is used to construct the options to be
passed to the actual C compiler (cc1
).
%2
Process the cc1plus
spec. This is used to construct the options to be
passed to the actual C++ compiler (cc1plus
).
%*
Substitute the variable part of a matched option. See below. Note that each comma in the substituted string is replaced by a single space.
%<S
Remove all occurrences of -S
from the command line. Note—this
command is position dependent. ‘%’ commands in the spec string
before this one see -S
, ‘%’ commands in the spec string
after this one do not.
%<S*
Similar to ‘%<S’, but match all switches beginning with -S
.
%>S
Similar to ‘%<S’, but keep -S
in the GCC command line.
%:function(args)
Call the named function function, passing it args. args is first processed as a nested spec string, then split into an argument vector in the usual fashion. The function returns a string which is processed as if it had appeared literally as part of the current spec.
The following built-in spec functions are provided:
getenv
The getenv
spec function takes two arguments: an environment
variable name and a string. If the environment variable is not
defined, a fatal error is issued. Otherwise, the return value is the
value of the environment variable concatenated with the string. For
example, if TOPDIR
is defined as /path/to/top, then:
%:getenv(TOPDIR /include)
expands to /path/to/top/include.
if-exists
The if-exists
spec function takes one argument, an absolute
pathname to a file. If the file exists, if-exists
returns the
pathname. Here is a small example of its usage:
*startfile: crt0%O%s %:if-exists(crti%O%s) crtbegin%O%s
if-exists-else
The if-exists-else
spec function is similar to the if-exists
spec function, except that it takes two arguments. The first argument is
an absolute pathname to a file. If the file exists, if-exists-else
returns the pathname. If it does not exist, it returns the second argument.
This way, if-exists-else
can be used to select one file or another,
based on the existence of the first. Here is a small example of its usage:
*startfile: crt0%O%s %:if-exists(crti%O%s) \ %:if-exists-else(crtbeginT%O%s crtbegin%O%s)
if-exists-then-else
The if-exists-then-else
spec function takes at least two arguments
and an optional third one. The first argument is an absolute pathname to a
file. If the file exists, the function returns the second argument.
If the file does not exist, the function returns the third argument if there
is one, or NULL otherwise. This can be used to expand one text, or optionally
another, based on the existence of a file. Here is a small example of its
usage:
-l%:if-exists-then-else(%:getenv(VSB_DIR rtnet.h) rtnet net)
sanitize
The sanitize
spec function takes no arguments. It returns non-NULL if
any address, thread or undefined behavior sanitizers are active.
%{%:sanitize(address):-funwind-tables}
replace-outfile
The replace-outfile
spec function takes two arguments. It looks for the
first argument in the outfiles array and replaces it with the second argument. Here
is a small example of its usage:
%{fgnu-runtime:%:replace-outfile(-lobjc -lobjc-gnu)}
remove-outfile
The remove-outfile
spec function takes one argument. It looks for the
first argument in the outfiles array and removes it. Here is a small example
its usage:
%:remove-outfile(-lm)
version-compare
The version-compare
spec function takes four or five arguments of the following
form:
<comparison-op> <arg1> [<arg2>] <switch> <result>
It returns result
if the comparison evaluates to true, and NULL if it doesn’t.
The supported comparison-op
values are:
>=
True if switch
is a later (or same) version than arg1
!>
Opposite of >=
<
True if switch
is an earlier version than arg1
!<
Opposite of <
><
True if switch
is arg1
or later, and earlier than arg2
<>
True if switch
is earlier than arg1
, or is arg2
or later
If the switch
is not present at all, the condition is false unless the first character
of the comparison-op
is !
.
%:version-compare(>= 10.3 mmacosx-version-min= -lmx)
The above example would add -lmx if -mmacosx-version-min=10.3.9 was passed.
include
The include
spec function behaves much like %include
, with the advantage
that it can be nested inside a spec and thus be conditionalized. It takes one argument,
the filename, and looks for it in the startfile path. It always returns NULL.
%{static-libasan|static:%:include(libsanitizer.spec)%(link_libasan)}
pass-through-libs
The pass-through-libs
spec function takes any number of arguments. It
finds any -l options and any non-options ending in .a (which it
assumes are the names of linker input library archive files) and returns a
result containing all the found arguments each prepended by
-plugin-opt=-pass-through= and joined by spaces. This list is
intended to be passed to the LTO linker plugin.
%:pass-through-libs(%G %L %G)
print-asm-header
The print-asm-header
function takes no arguments and simply
prints a banner like:
Assembler options ================= Use "-Wa,OPTION" to pass "OPTION" to the assembler.
It is used to separate compiler options from assembler options in the --target-help output.
gt
The gt
spec function takes two or more arguments. It returns ""
(the
empty string) if the second-to-last argument is greater than the last argument, and NULL
otherwise. The following example inserts the link_gomp
spec if the last
-ftree-parallelize-loops= option given on the command line is greater than 1:
%{%:gt(%{ftree-parallelize-loops=*:%*} 1):%:include(libgomp.spec)%(link_gomp)}
debug-level-gt
The debug-level-gt
spec function takes one argument and returns ""
(the
empty string) if debug_info_level
is greater than the specified number, and NULL
otherwise.
%{%:debug-level-gt(0):%{gdwarf*:--gdwarf2}}
%{S}
Substitutes the -S
switch, if that switch is given to GCC.
If that switch is not specified, this substitutes nothing. Note that
the leading dash is omitted when specifying this option, and it is
automatically inserted if the substitution is performed. Thus the spec
string ‘%{foo}’ matches the command-line option -foo
and outputs the command-line option -foo.
%W{S}
Like %{S
} but mark last argument supplied within as a file to be
deleted on failure.
%@{S}
Like %{S
} but puts the result into a FILE
and substitutes
@FILE
if an @file
argument has been supplied.
%{S*}
Substitutes all the switches specified to GCC whose names start
with -S
, but which also take an argument. This is used for
switches like -o, -D, -I, etc.
GCC considers -o foo as being
one switch whose name starts with ‘o’. %{o*} substitutes this
text, including the space. Thus two arguments are generated.
%{S*&T*}
Like %{S
*}, but preserve order of S
and T
options
(the order of S
and T
in the spec is not significant).
There can be any number of ampersand-separated variables; for each the
wild card is optional. Useful for CPP as ‘%{D*&U*&A*}’.
%{S:X}
Substitutes X
, if the -S switch is given to GCC.
%{!S:X}
Substitutes X
, if the -S switch is not given to GCC.
%{S*:X}
Substitutes X
if one or more switches whose names start with
-S
are specified to GCC. Normally X
is substituted only
once, no matter how many such switches appeared. However, if %*
appears somewhere in X
, then X
is substituted once
for each matching switch, with the %*
replaced by the part of
that switch matching the *
.
If %*
appears as the last part of a spec sequence then a space
is added after the end of the last substitution. If there is more
text in the sequence, however, then a space is not generated. This
allows the %*
substitution to be used as part of a larger
string. For example, a spec string like this:
%{mcu=*:--script=%*/memory.ld}
when matching an option like -mcu=newchip produces:
--script=newchip/memory.ld
%{.S:X}
Substitutes X
, if processing a file with suffix S
.
%{!.S:X}
Substitutes X
, if not processing a file with suffix S
.
%{,S:X}
Substitutes X
, if processing a file for language S
.
%{!,S:X}
Substitutes X
, if not processing a file for language S
.
%{S|P:X}
Substitutes X
if either -S
or -P
is given to
GCC. This may be combined with ‘!’, ‘.’, ‘,’, and
*
sequences as well, although they have a stronger binding than
the ‘|’. If %*
appears in X
, all of the
alternatives must be starred, and only the first matching alternative
is substituted.
For example, a spec string like this:
%{.c:-foo} %{!.c:-bar} %{.c|d:-baz} %{!.c|d:-boggle}
outputs the following command-line options from the following input command-line options:
fred.c -foo -baz jim.d -bar -boggle -d fred.c -foo -baz -boggle -d jim.d -bar -baz -boggle
%{%:function(args):X}
Call function named function with args args. If the
function returns non-NULL, then X
is substituted, if it returns
NULL, it isn’t substituted.
%{S:X; T:Y; :D}
If S
is given to GCC, substitutes X
; else if T
is
given to GCC, substitutes Y
; else substitutes D
. There can
be as many clauses as you need. This may be combined with .
,
,
, !
, |
, and *
as needed.
The switch matching text S
in a ‘%{S}’, ‘%{S:X}’
or similar construct can use a backslash to ignore the special meaning
of the character following it, thus allowing literal matching of a
character that is otherwise specially treated. For example,
‘%{std=iso9899\:1999:X}’ substitutes X
if the
-std=iso9899:1999 option is given.
The conditional text X
in a ‘%{S:X}’ or similar
construct may contain other nested ‘%’ constructs or spaces, or
even newlines. They are processed as usual, as described above.
Trailing white space in X
is ignored. White space may also
appear anywhere on the left side of the colon in these constructs,
except between .
or *
and the corresponding word.
The -O, -f, -m, and -W switches are
handled specifically in these constructs. If another value of
-O or the negated form of a -f, -m, or
-W switch is found later in the command line, the earlier
switch value is ignored, except with {S
*} where S
is
just one letter, which passes all matching options.
The character ‘|’ at the beginning of the predicate text is used to indicate that a command should be piped to the following command, but only if -pipe is specified.
It is built into GCC which switches take arguments and which do not. (You might think it would be useful to generalize this to allow each compiler’s spec to say which switches take arguments. But this cannot be done in a consistent fashion. GCC cannot even decide which input files have been specified without knowing which switches take arguments, and it must know which input files to compile in order to tell which compilers to run).
GCC also knows implicitly that arguments starting in -l are to be treated as compiler output files, and passed to the linker in their proper position among the other output files.
Next: Environment Variables, Previous: Submodel Options, Up: Invoking GCC [Contents][Index]