Cannot configure gcc4.4.0 in order to build h8300 crosscompiler

["ariga masahiro" <ariga at link-lab dot co dot jp>]

Hello everyone,

I am struggling to build h8300 crosscompiler from GCC4.4.0.
I learned it is necessary to patch gcc for complying to double 64 bits.

I used next sources.
binutils-2.19.1.tar.bz2
gcc-4.4.0.tar.bz2
newlib-1.17.0.tar.gz

I've got patch for GCC3.3.2 source.
I appended it in compressed file.
patch-sources/patch-for-gcc3.3.2/gcc_diff-new.txt

But I was disappointed that it could not be used for GCC4.4.0 source per se.

So I studied the patch and converted GCC4.4.0 source for installing h8300 
croscompiler.

The patch changes next four files.
/gcc-3.3.2/gcc/config/h8300/extfloatlib.c
/gcc-3.3.2/gcc/config/h8300/float-h8300.h
/gcc-3.3.2/gcc/config/h8300/h8300.h
/gcc-3.3.2/gcc/config/h8300/t-h8300

First two files(extfloatlib.c,float-h8300.h) are newly made,so I think I
could use them per ce into GCC4.4.0 source.
h8300.h and t-h8300 are modified and I must apply differences to GCC4.4.0
source.

I appended gcc3.3.2 original h8300.h,t-h8300.
patch-sources/gcc3.3.2-before-patch-sources/h8300.h,t-h8300

And after-patch-applied gcc3.3.2 four files.
patch-sources/gcc3.3.2-after-patch-sources/h8300.h,t-h8300,extfloatlib.c,float-h8300.h

And gcc4.4.0 original h8300.h,t-h8300.
patch-sources\gcc4.4.0-original-sources/h8300.h,t-h8300

And after-patch-converted gcc4.4.0 four files.
patch-sources/gcc4.4.0-patch-converted-sources/h8300.h,t-h8300,extfloatlib.c,float-h8300.h

I succeeded binutils configure.
But when I configured gcc next error happened.

--error
/tmp/build/build_gcc/./gcc/xgcc -B/tmp/build/build_gcc/./gcc/ -nostdinc -B/tmp/build/build_gcc/h8300-elf/newlib/ 
-isyste
m /tmp/build/build_gcc/h8300-elf/newlib/targ-include -isystem 
/src/gcc-4.4.0/newlib/libc/include -B/gnutools/h8300-elf/b
in/ -B/gnutools/h8300-elf/lib/ -isystem /gnutools/h8300-elf/include -isystem 
/gnutools/h8300-elf/sys-include -g -O2 -mh
-O2  -g -O2 -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE  -W -Wall -Wwrite-strings -Wstrict-prototypes 
-Wmissing-prototypes -Wca
st-qual -Wold-style-definition  -isystem 
./include   -g  -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -Dinhibit_libc  -I. -I. 
-
I../../.././gcc -I/src/gcc-4.4.0/libgcc -I/src/gcc-4.4.0/libgcc/. -I/src/gcc-4.4.0/libgcc/../gcc 
-I/src/gcc-4.4.0/libgcc
/../include  -DHAVE_CC_TLS -o _bswapdi2.o -MT _bswapdi2.o -MD -MP -MF 
_bswapdi2.dep -DL_bswapdi2 -c /src/gcc-4.4.0/libgc
c/../gcc/libgcc2.c \

/src/gcc-4.4.0/libgcc/../gcc/libgcc2.c:503: error: expected '=', ',', ';', 
'asm' or '__attribute__' before '__bswapdi2'
/src/gcc-4.4.0/libgcc/../gcc/libgcc2.c:505:19: warning: integer constant is 
too large for its type
/src/gcc-4.4.0/libgcc/../gcc/libgcc2.c:506:14: warning: integer constant is 
too large for its type
/src/gcc-4.4.0/libgcc/../gcc/libgcc2.c:507:14: warning: integer constant is 
too large for its type
/src/gcc-4.4.0/libgcc/../gcc/libgcc2.c:508:14: warning: integer constant is 
too large for its type
make[4]: *** [_bswapdi2.o] Error 1
make[4]: Leaving directory `/tmp/build/build_gcc/h8300-elf/h8300h/libgcc'
make[3]: *** [multi-do] Error 1
make[3]: Leaving directory `/tmp/build/build_gcc/h8300-elf/libgcc'
make[2]: *** [all-multi] Error 2
make[2]: Leaving directory `/tmp/build/build_gcc/h8300-elf/libgcc'
make[1]: *** [all-target-libgcc] Error 2
make[1]: Leaving directory `/tmp/build/build_gcc'
make: *** [all] Error 2
make: Leaving directory `/tmp/build/build_gcc'
-- end of error

It is caused by next declaration in libgcc2.c.
#ifdef L_bswapdi2
DItype
__bswapdi2 (DItype u)

Since when I retrieved original h8300.h,t-h8300 then not occurred above 
error,
I am sure I wrongly converted gcc4.4.0 four files.

Would you please teach me what is wrong my conversion ?
Please help me.

Masahiro Ariga

Attachment: patch-sources.tar.bz2
Description: Binary data