Bootstrap failure on alphaev6-dec-osf5.1

[Ryszard Kabatek <Ryszard dot Kabatek at softax dot pl>]

Compaq C V6.3-025 on Compaq Tru64 UNIX V5.1 (Rev. 732)
Compiler Driver V6.3-026 (sys) cc Driver

Any suggestions?

Regards
-- 
Ryszard Kabatek
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Info: File not optimized; use -g3 if both optimization and debug wanted. (suppressoptlvl)
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 80: In the initializer for mode_mask_array[5], the shift count "64" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (DImode, "DI", MODE_INT, BITS_PER_UNIT*8, 8, 8, TImode, VOIDmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 81: In the initializer for mode_mask_array[6], the shift count "128" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (TImode, "TI", MODE_INT, BITS_PER_UNIT*16, 16, 16, OImode, VOIDmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 82: In the initializer for mode_mask_array[7], the shift count "256" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (OImode, "OI", MODE_INT, BITS_PER_UNIT*32, 32, 32, VOIDmode, VOIDmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 90: In the initializer for mode_mask_array[11], the shift count "64" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (PDImode, "PDI", MODE_PARTIAL_INT, BITS_PER_UNIT*8, 8, 8, VOIDmode, VOIDmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 96: In the initializer for mode_mask_array[16], the shift count "64" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (DFmode, "DF", MODE_FLOAT, BITS_PER_UNIT*8, 8, 8, XFmode, VOIDmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 97: In the initializer for mode_mask_array[17], the shift count "96" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (XFmode, "XF", MODE_FLOAT, BITS_PER_UNIT*12, 12, 12, TFmode, VOIDmode) /* IEEE extended */
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 98: In the initializer for mode_mask_array[18], the shift count "128" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (TFmode, "TF", MODE_FLOAT, BITS_PER_UNIT*16, 16, 16, VOIDmode, VOIDmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 103: In the initializer for mode_mask_array[21], the shift count "64" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (SCmode, "SC", MODE_COMPLEX_FLOAT, BITS_PER_UNIT*8, 8, 4, DCmode, SFmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 104: In the initializer for mode_mask_array[22], the shift count "128" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (DCmode, "DC", MODE_COMPLEX_FLOAT, BITS_PER_UNIT*16, 16, 8, XCmode, DFmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 105: In the initializer for mode_mask_array[23], the shift count "192" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (XCmode, "XC", MODE_COMPLEX_FLOAT, BITS_PER_UNIT*24, 24, 12, TCmode, XFmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 106: In the initializer for mode_mask_array[24], the shift count "256" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (TCmode, "TC", MODE_COMPLEX_FLOAT, BITS_PER_UNIT*32, 32, 16, VOIDmode, TFmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 110: In the initializer for mode_mask_array[27], the shift count "64" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (CSImode, "CSI", MODE_COMPLEX_INT, BITS_PER_UNIT*8, 8, 4, CDImode, SImode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 111: In the initializer for mode_mask_array[28], the shift count "128" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (CDImode, "CDI", MODE_COMPLEX_INT, BITS_PER_UNIT*16, 16, 8, CTImode, DImode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 112: In the initializer for mode_mask_array[29], the shift count "256" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (CTImode, "CTI", MODE_COMPLEX_INT, BITS_PER_UNIT*32, 32, 16, COImode, TImode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 113: In the initializer for mode_mask_array[30], the shift count "512" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (COImode, "COI", MODE_COMPLEX_INT, BITS_PER_UNIT*64, 64, 32, VOIDmode, OImode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 123: In the initializer for mode_mask_array[33], the shift count "64" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V2SImode, "V2SI", MODE_VECTOR_INT, BITS_PER_UNIT*8, 8, 4, V16QImode, SImode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 124: In the initializer for mode_mask_array[34], the shift count "128" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V2DImode, "V2DI", MODE_VECTOR_INT, BITS_PER_UNIT*16, 16, 8, V8SImode, DImode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 127: In the initializer for mode_mask_array[36], the shift count "64" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V4HImode, "V4HI", MODE_VECTOR_INT, BITS_PER_UNIT*8, 8, 2, V2SImode, HImode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 128: In the initializer for mode_mask_array[37], the shift count "128" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V4SImode, "V4SI", MODE_VECTOR_INT, BITS_PER_UNIT*16, 16, 4, V2DImode, SImode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 129: In the initializer for mode_mask_array[38], the shift count "256" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V4DImode, "V4DI", MODE_VECTOR_INT, BITS_PER_UNIT*32, 32, 8, V8DImode, DImode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 131: In the initializer for mode_mask_array[39], the shift count "64" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V8QImode, "V8QI", MODE_VECTOR_INT, BITS_PER_UNIT*8, 8, 1, V4HImode, QImode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 132: In the initializer for mode_mask_array[40], the shift count "128" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V8HImode, "V8HI", MODE_VECTOR_INT, BITS_PER_UNIT*16, 16, 2, V4SImode, HImode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 133: In the initializer for mode_mask_array[41], the shift count "256" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V8SImode, "V8SI", MODE_VECTOR_INT, BITS_PER_UNIT*32, 32, 4, V4DImode, SImode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 134: In the initializer for mode_mask_array[42], the shift count "512" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V8DImode, "V8DI", MODE_VECTOR_INT, BITS_PER_UNIT*64, 64, 8, VOIDmode, DImode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 136: In the initializer for mode_mask_array[43], the shift count "128" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V16QImode, "V16QI", MODE_VECTOR_INT, BITS_PER_UNIT*16, 16, 1, V8HImode, QImode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 138: In the initializer for mode_mask_array[44], the shift count "64" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V2SFmode, "V2SF", MODE_VECTOR_FLOAT, BITS_PER_UNIT*8, 8, 4, V4SFmode, SFmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 139: In the initializer for mode_mask_array[45], the shift count "128" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V2DFmode, "V2DF", MODE_VECTOR_FLOAT, BITS_PER_UNIT*16, 16, 8, V8SFmode, DFmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 141: In the initializer for mode_mask_array[46], the shift count "128" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V4SFmode, "V4SF", MODE_VECTOR_FLOAT, BITS_PER_UNIT*16, 16, 4, V2DFmode, SFmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 142: In the initializer for mode_mask_array[47], the shift count "256" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V4DFmode, "V4DF", MODE_VECTOR_FLOAT, BITS_PER_UNIT*32, 32, 8, V8DFmode, DFmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 144: In the initializer for mode_mask_array[48], the shift count "256" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V8SFmode, "V8SF", MODE_VECTOR_FLOAT, BITS_PER_UNIT*32, 32, 4,V4DFmode, SFmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 145: In the initializer for mode_mask_array[49], the shift count "512" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V8DFmode, "V8DF", MODE_VECTOR_FLOAT, BITS_PER_UNIT*64, 64, 8, VOIDmode, DFmode)
^
cc: Warning: ../../gcc-20020408/gcc/machmode.def, line 146: In the initializer for mode_mask_array[50], the shift count "512" is negative or is greater than or equal to the promoted size of the operand "(unsigned long)1". (shiftcount)
DEF_MACHMODE (V16SFmode, "V16SF", MODE_VECTOR_FLOAT, 512, 64, 4, VOIDmode, SFmode)
^
make[2]: *** [../../gcc-20020408/gcc/c-parse.c] Error 1
make[1]: *** [stage1_build] Error 2
make: *** [bootstrap] Error 2