This is the mail archive of the gcc-patches@gcc.gnu.org mailing list for the GCC project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[PATCH][GCC][ARM] New helper functions to check atomicity requirements


A few places in the arm and aarch64 backends check whether an atomic
operation needs acquire or release semantics.
This is generally done with a check like

(is_mm_relaxed (model)
  || is_mm_consume (model)
  || is_mm_release (model))

In this patch we introduce two helper functions to make things a little
tidier.

There are a few places in the arm/ backend that check whether an
operation needs memory model semantics with an idiom that can now be
replaced with the new aarch_mm_needs_* functions, so we make that
replacement.

There is also some backslash removal to make things a little tidier.

Full bootstrap and regression test plus cross-compilation regression tests done on arm-none-linux-gnueabihf.
Ok for trunk?

gcc/ChangeLog:

2018-09-24  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/arm/arm.c (arm_split_compare_and_swap, arm_split_atomic_op):
	Use new helper functions.
	* config/arm/sync.md (atomic_load<mode>, atomic_store<mode>):
	Use new helper functions.
	* config/arm/aarch-common-protos.h (aarch_mm_needs_acquire,
	aarch_mm_needs_release): New declarations.
	* config/arm/aarch-common.c (aarch_mm_needs_acquire,
	aarch_mm_needs_release): New.


###############     Attachment also inlined for ease of reply    ###############


diff --git a/gcc/config/arm/aarch-common-protos.h b/gcc/config/arm/aarch-common-protos.h
index 6204482bbb91fc64dbe37f892559d02a6cdf42da..b9a9b0438f6dddb7468e2b3581dcd3202b85b898 100644
--- a/gcc/config/arm/aarch-common-protos.h
+++ b/gcc/config/arm/aarch-common-protos.h
@@ -28,6 +28,8 @@ extern int aarch_crypto_can_dual_issue (rtx_insn *, rtx_insn *);
 extern bool aarch_rev16_p (rtx);
 extern bool aarch_rev16_shleft_mask_imm_p (rtx, machine_mode);
 extern bool aarch_rev16_shright_mask_imm_p (rtx, machine_mode);
+extern bool aarch_mm_needs_acquire (rtx);
+extern bool aarch_mm_needs_release (rtx);
 extern int arm_early_load_addr_dep (rtx, rtx);
 extern int arm_early_load_addr_dep_ptr (rtx, rtx);
 extern int arm_early_store_addr_dep (rtx, rtx);
diff --git a/gcc/config/arm/aarch-common.c b/gcc/config/arm/aarch-common.c
index f0675a339f9a1c20ed7206de10359e4798e48ec5..14eb49575480c392a4d872da9ea92633f6f8ca8f 100644
--- a/gcc/config/arm/aarch-common.c
+++ b/gcc/config/arm/aarch-common.c
@@ -29,6 +29,7 @@
 #include "tm.h"
 #include "rtl.h"
 #include "rtl-iter.h"
+#include "memmodel.h"
 
 /* In ARMv8-A there's a general expectation that AESE/AESMC
    and AESD/AESIMC sequences of the form:
@@ -230,6 +231,28 @@ aarch_rev16_p (rtx x)
   return is_rev;
 }
 
+/* Return non-zero if the RTX representing a memory model is a memory model
+   that needs acquire semantics.  */
+bool
+aarch_mm_needs_acquire (rtx const_int)
+{
+  enum memmodel model = memmodel_from_int (INTVAL (const_int));
+  return !(is_mm_relaxed (model)
+	   || is_mm_consume (model)
+	   || is_mm_release (model));
+}
+
+/* Return non-zero if the RTX representing a memory model is a memory model
+   that needs release semantics.  */
+bool
+aarch_mm_needs_release (rtx const_int)
+{
+  enum memmodel model = memmodel_from_int (INTVAL (const_int));
+  return !(is_mm_relaxed (model)
+	   || is_mm_consume (model)
+	   || is_mm_acquire (model));
+}
+
 /* Return nonzero if the CONSUMER instruction (a load) does need
    PRODUCER's value to calculate the address.  */
 int
diff --git a/gcc/config/arm/arm.c b/gcc/config/arm/arm.c
index 6332e68df0506bb980cf55e05e7293b4a44d1e91..c7e6bf7f13467893c409d031a17a86594a2d160b 100644
--- a/gcc/config/arm/arm.c
+++ b/gcc/config/arm/arm.c
@@ -28626,7 +28626,7 @@ arm_expand_compare_and_swap (rtx operands[])
 void
 arm_split_compare_and_swap (rtx operands[])
 {
-  rtx rval, mem, oldval, newval, neg_bval;
+  rtx rval, mem, oldval, newval, neg_bval, mod_s_rtx;
   machine_mode mode;
   enum memmodel mod_s, mod_f;
   bool is_weak;
@@ -28638,20 +28638,16 @@ arm_split_compare_and_swap (rtx operands[])
   oldval = operands[3];
   newval = operands[4];
   is_weak = (operands[5] != const0_rtx);
-  mod_s = memmodel_from_int (INTVAL (operands[6]));
+  mod_s_rtx = operands[6];
+  mod_s = memmodel_from_int (INTVAL (mod_s_rtx));
   mod_f = memmodel_from_int (INTVAL (operands[7]));
   neg_bval = TARGET_THUMB1 ? operands[0] : operands[8];
   mode = GET_MODE (mem);
 
   bool is_armv8_sync = arm_arch8 && is_mm_sync (mod_s);
 
-  bool use_acquire = TARGET_HAVE_LDACQ
-                     && !(is_mm_relaxed (mod_s) || is_mm_consume (mod_s)
-			  || is_mm_release (mod_s));
-		
-  bool use_release = TARGET_HAVE_LDACQ
-                     && !(is_mm_relaxed (mod_s) || is_mm_consume (mod_s)
-			  || is_mm_acquire (mod_s));
+  bool use_acquire = TARGET_HAVE_LDACQ && aarch_mm_needs_acquire (mod_s_rtx);
+  bool use_release = TARGET_HAVE_LDACQ && aarch_mm_needs_release (mod_s_rtx);
 
   /* For ARMv8, the load-acquire is too weak for __sync memory orders.  Instead,
      a full barrier is emitted after the store-release.  */
@@ -28746,13 +28742,8 @@ arm_split_atomic_op (enum rtx_code code, rtx old_out, rtx new_out, rtx mem,
 
   bool is_armv8_sync = arm_arch8 && is_mm_sync (model);
 
-  bool use_acquire = TARGET_HAVE_LDACQ
-                     && !(is_mm_relaxed (model) || is_mm_consume (model)
-			  || is_mm_release (model));
-
-  bool use_release = TARGET_HAVE_LDACQ
-                     && !(is_mm_relaxed (model) || is_mm_consume (model)
-			  || is_mm_acquire (model));
+  bool use_acquire = TARGET_HAVE_LDACQ && aarch_mm_needs_acquire (model_rtx);
+  bool use_release = TARGET_HAVE_LDACQ && aarch_mm_needs_release (model_rtx);
 
   /* For ARMv8, a load-acquire is too weak for __sync memory orders.  Instead,
      a full barrier is emitted after the store-release.  */
diff --git a/gcc/config/arm/sync.md b/gcc/config/arm/sync.md
index 7141c76bef511e7869e7e6c1d1bc00674c67c3d0..08fc5d1a8ab4a07cd8aa2f3c9826af8e3326f9b1 100644
--- a/gcc/config/arm/sync.md
+++ b/gcc/config/arm/sync.md
@@ -70,20 +70,19 @@
       VUNSPEC_LDA))]
   "TARGET_HAVE_LDACQ"
   {
-    enum memmodel model = memmodel_from_int (INTVAL (operands[2]));
-    if (is_mm_relaxed (model) || is_mm_consume (model) || is_mm_release (model))
+    if (aarch_mm_needs_acquire (operands[2]))
       {
 	if (TARGET_THUMB1)
-	  return \"ldr<sync_sfx>\\t%0, %1\";
+	  return "lda<sync_sfx>\t%0, %1";
 	else
-	  return \"ldr<sync_sfx>%?\\t%0, %1\";
+	  return "lda<sync_sfx>%?\t%0, %1";
       }
     else
       {
 	if (TARGET_THUMB1)
-	  return \"lda<sync_sfx>\\t%0, %1\";
+	  return "ldr<sync_sfx>\t%0, %1";
 	else
-	  return \"lda<sync_sfx>%?\\t%0, %1\";
+	  return "ldr<sync_sfx>%?\t%0, %1";
       }
   }
   [(set_attr "arch" "32,v8mb,any")
@@ -97,20 +96,19 @@
       VUNSPEC_STL))]
   "TARGET_HAVE_LDACQ"
   {
-    enum memmodel model = memmodel_from_int (INTVAL (operands[2]));
-    if (is_mm_relaxed (model) || is_mm_consume (model) || is_mm_acquire (model))
+    if (aarch_mm_needs_release (operands[2]))
       {
 	if (TARGET_THUMB1)
-	  return \"str<sync_sfx>\t%1, %0\";
+	  return "stl<sync_sfx>\t%1, %0";
 	else
-	  return \"str<sync_sfx>%?\t%1, %0\";
+	  return "stl<sync_sfx>%?\t%1, %0";
       }
     else
       {
 	if (TARGET_THUMB1)
-	  return \"stl<sync_sfx>\t%1, %0\";
+	  return "str<sync_sfx>\t%1, %0";
 	else
-	  return \"stl<sync_sfx>%?\t%1, %0\";
+	  return "str<sync_sfx>%?\t%1, %0";
       }
   }
   [(set_attr "arch" "32,v8mb,any")

Attachment: helper-functions.patch
Description: Text document


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]