This is the mail archive of the gcc-patches@gcc.gnu.org mailing list for the GCC project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [PATCH] [ARC] Cleanup unused functions.


* Claudiu Zissulescu <claziss@gmail.com> [2018-02-20 15:38:32 +0200]:

> From: Claudiu Zissulescu <claziss@synopsys.com>
> 
> Cleanup unsed functions and macros.
> 
> OK to apply?
> Claudiu

Looks good.  Nice cleanup.

Thanks,
Andrew


> 
> gcc/
> 2018-01-26  Claudiu Zissulescu  <claziss@synopsys.com>
> 
> 	* config/arc/arc.c (arc_finalize_pic): Remove function.
> 	(arc_must_save_register): We use single base PIC register, remove
> 	checks to save/restore the PIC register.
> 	(arc_expand_prologue): Likewise.
> 	* config/arc/arc-protos.h (arc_set_default_type_attributes):
> 	Remove.
> 	(arc_verify_short): Likewise.
> 	(arc_attr_type): Likewise.
> 	* config/arc/arc.c (arc_set_default_type_attributes): Remove.
> 	(walk_stores): Likewise.
> 	(arc_address_cost): Make it static.
> 	(arc_verify_short): Likewise.
> 	(branch_dest): Likewise.
> 	(arc_attr_type): Likewise.
> 	* config/arc/arc.c (TARGET_ADJUST_INSN_LENGTH): Remove.
> 	(TARGET_INSN_LENGTH_PARAMETERS): Likewise.
> 	(arc_final_prescan_insn): Remove inserting the nops due to
> 	hardware hazards.  It is done in reorg step.
> 	(insn_length_variant_t): Remove.
> 	(insn_length_parameters_t): Likewise.
> 	(arc_insn_length_parameters): Likewise.
> 	(arc_get_insn_variants): Likewise.
> 	* config/arc/arc.h (TARGET_UPSIZE_DBR): Remove.
> ---
>  gcc/config/arc/arc-protos.h |   3 -
>  gcc/config/arc/arc.c        | 471 +-------------------------------------------
>  gcc/config/arc/arc.h        |   3 -
>  3 files changed, 4 insertions(+), 473 deletions(-)
> 
> diff --git a/gcc/config/arc/arc-protos.h b/gcc/config/arc/arc-protos.h
> index b469cfc4c2c..75cfedab7f1 100644
> --- a/gcc/config/arc/arc-protos.h
> +++ b/gcc/config/arc/arc-protos.h
> @@ -32,7 +32,6 @@ extern bool arc_double_limm_p (rtx);
>  extern void arc_print_operand (FILE *, rtx, int);
>  extern void arc_print_operand_address (FILE *, rtx);
>  extern void arc_final_prescan_insn (rtx_insn *, rtx *, int);
> -extern void arc_set_default_type_attributes(tree type);
>  extern const char *arc_output_libcall (const char *);
>  extern bool prepare_extend_operands (rtx *operands, enum rtx_code code,
>  				     machine_mode omode);
> @@ -97,10 +96,8 @@ extern void split_addsi (rtx *);
>  extern void split_subsi (rtx *);
>  extern void arc_pad_return (void);
>  extern void arc_split_move (rtx *);
> -extern int arc_verify_short (rtx_insn *insn, int unalign, int);
>  extern const char *arc_short_long (rtx_insn *insn, const char *, const char *);
>  extern rtx arc_regno_use_in (unsigned int, rtx);
> -extern int arc_attr_type (rtx_insn *);
>  extern bool arc_scheduling_not_expected (void);
>  extern bool arc_sets_cc_p (rtx_insn *insn);
>  extern int arc_label_align (rtx_insn *label);
> diff --git a/gcc/config/arc/arc.c b/gcc/config/arc/arc.c
> index f572d6f4883..74007d8aba3 100644
> --- a/gcc/config/arc/arc.c
> +++ b/gcc/config/arc/arc.c
> @@ -473,8 +473,6 @@ static void arc_function_arg_advance (cumulative_args_t, machine_mode,
>  				      const_tree, bool);
>  static rtx arc_legitimize_address_0 (rtx, rtx, machine_mode mode);
>  
> -static void arc_finalize_pic (void);
> -
>  /* initialize the GCC target structure.  */
>  #undef  TARGET_COMP_TYPE_ATTRIBUTES
>  #define TARGET_COMP_TYPE_ATTRIBUTES arc_comp_type_attributes
> @@ -612,10 +610,6 @@ static void arc_finalize_pic (void);
>  
>  #define TARGET_LEGITIMIZE_ADDRESS arc_legitimize_address
>  
> -#define TARGET_ADJUST_INSN_LENGTH arc_adjust_insn_length
> -
> -#define TARGET_INSN_LENGTH_PARAMETERS arc_insn_length_parameters
> -
>  #undef TARGET_NO_SPECULATION_IN_DELAY_SLOTS_P
>  #define TARGET_NO_SPECULATION_IN_DELAY_SLOTS_P	\
>    arc_no_speculation_in_delay_slots_p
> @@ -2131,14 +2125,6 @@ arc_comp_type_attributes (const_tree type1,
>    return 1;
>  }
>  
> -/* Set the default attributes for TYPE.  */
> -
> -void
> -arc_set_default_type_attributes (tree type ATTRIBUTE_UNUSED)
> -{
> -  gcc_unreachable();
> -}
> -
>  /* Misc. utilities.  */
>  
>  /* X and Y are two things to compare using CODE.  Emit the compare insn and
> @@ -2368,7 +2354,7 @@ arc_setup_incoming_varargs (cumulative_args_t args_so_far,
>  /* Provide the costs of an addressing mode that contains ADDR.
>     If ADDR is not a valid address, its cost is irrelevant.  */
>  
> -int
> +static int
>  arc_address_cost (rtx addr, machine_mode, addr_space_t, bool speed)
>  {
>    switch (GET_CODE (addr))
> @@ -2703,10 +2689,6 @@ arc_must_save_register (int regno, struct function *func)
>        && !firq_auto_save_p)
>      return true;
>  
> -  if (flag_pic && crtl->uses_pic_offset_table
> -      && regno == PIC_OFFSET_TABLE_REGNUM)
> -    return true;
> -
>    return false;
>  }
>  
> @@ -3296,10 +3278,6 @@ arc_expand_prologue (void)
>  	emit_insn (gen_stack_tie (stack_pointer_rtx,
>  				  hard_frame_pointer_rtx));
>      }
> -
> -  /* Setup the gp register, if needed.  */
> -  if (crtl->uses_pic_offset_table)
> -    arc_finalize_pic ();
>  }
>  
>  /* Do any necessary cleanup after a function to restore stack, frame,
> @@ -3545,37 +3523,6 @@ arc_unspec_offset (rtx loc, int unspec)
>  					       unspec));
>  }
>  
> -/* Emit special PIC prologues and epilogues.  */
> -/* If the function has any GOTOFF relocations, then the GOTBASE
> -   register has to be setup in the prologue
> -   The instruction needed at the function start for setting up the
> -   GOTBASE register is
> -      add rdest, pc,
> -   ----------------------------------------------------------
> -   The rtl to be emitted for this should be:
> -     set (reg basereg)
> -         (plus (reg pc)
> -               (const (unspec (symref _DYNAMIC) 3)))
> -   ----------------------------------------------------------  */
> -
> -static void
> -arc_finalize_pic (void)
> -{
> -  rtx pat;
> -  rtx baseptr_rtx = gen_rtx_REG (Pmode, PIC_OFFSET_TABLE_REGNUM);
> -
> -  if (crtl->uses_pic_offset_table == 0)
> -    return;
> -
> -  gcc_assert (flag_pic != 0);
> -
> -  pat = gen_rtx_SYMBOL_REF (Pmode, "_DYNAMIC");
> -  pat = arc_unspec_offset (pat, ARC_UNSPEC_GOT);
> -  pat = gen_rtx_SET (baseptr_rtx, pat);
> -
> -  emit_insn (pat);
> -}
> -
>  /* !TARGET_BARREL_SHIFTER support.  */
>  /* Emit a shift insn to set OP0 to OP1 shifted by OP2; CODE specifies what
>     kind of shift.  */
> @@ -4949,42 +4896,6 @@ arc_ccfsm_cond_exec_p (void)
>  	  && ARC_CCFSM_COND_EXEC_P (&arc_ccfsm_current));
>  }
>  
> -/* Like next_active_insn, but return NULL if we find an ADDR_(DIFF_)VEC,
> -   and look inside SEQUENCEs.  */
> -
> -static rtx_insn *
> -arc_next_active_insn (rtx_insn *insn, struct arc_ccfsm *statep)
> -{
> -  rtx pat;
> -
> -  do
> -    {
> -      if (statep)
> -	arc_ccfsm_post_advance (insn, statep);
> -      insn = NEXT_INSN (insn);
> -      if (!insn || BARRIER_P (insn))
> -	return NULL;
> -      if (statep)
> -	arc_ccfsm_advance (insn, statep);
> -    }
> -  while (NOTE_P (insn)
> -	 || (cfun->machine->arc_reorg_started
> -	     && LABEL_P (insn) && !label_to_alignment (insn))
> -	 || (NONJUMP_INSN_P (insn)
> -	     && (GET_CODE (PATTERN (insn)) == USE
> -		 || GET_CODE (PATTERN (insn)) == CLOBBER)));
> -  if (!LABEL_P (insn))
> -    {
> -      gcc_assert (INSN_P (insn));
> -      pat = PATTERN (insn);
> -      if (GET_CODE (pat) == ADDR_VEC || GET_CODE (pat) == ADDR_DIFF_VEC)
> -	return NULL;
> -      if (GET_CODE (pat) == SEQUENCE)
> -	return as_a <rtx_insn *> (XVECEXP (pat, 0, 0));
> -    }
> -  return insn;
> -}
> -
>  /* When deciding if an insn should be output short, we want to know something
>     about the following insns:
>     - if another insn follows which we know we can output as a short insn
> @@ -5009,7 +4920,7 @@ arc_next_active_insn (rtx_insn *insn, struct arc_ccfsm *statep)
>     zero if the current insn is aligned to a 4-byte-boundary, two otherwise.
>     If CHECK_ATTR is greater than 0, check the iscompact attribute first.  */
>  
> -int
> +static int
>  arc_verify_short (rtx_insn *insn, int, int check_attr)
>  {
>    enum attr_iscompact iscompact;
> @@ -5056,23 +4967,6 @@ arc_final_prescan_insn (rtx_insn *insn, rtx *opvec ATTRIBUTE_UNUSED,
>    if (TARGET_DUMPISIZE)
>      fprintf (asm_out_file, "\n; at %04x\n", INSN_ADDRESSES (INSN_UID (insn)));
>  
> -  /* Output a nop if necessary to prevent a hazard.
> -     Don't do this for delay slots: inserting a nop would
> -     alter semantics, and the only time we would find a hazard is for a
> -     call function result - and in that case, the hazard is spurious to
> -     start with.  */
> -  if (PREV_INSN (insn)
> -      && PREV_INSN (NEXT_INSN (insn)) == insn
> -      && arc_hazard (prev_real_insn (insn), insn))
> -    {
> -      current_output_insn =
> -	emit_insn_before (gen_nop (), NEXT_INSN (PREV_INSN (insn)));
> -      final_scan_insn (current_output_insn, asm_out_file, optimize, 1, NULL);
> -      current_output_insn = insn;
> -    }
> -  /* Restore extraction data which might have been clobbered by arc_hazard.  */
> -  extract_constrain_insn_cached (insn);
> -
>    if (!cfun->machine->prescan_initialized)
>      {
>        /* Clear lingering state from branch shortening.  */
> @@ -5138,7 +5032,7 @@ arc_frame_pointer_required (void)
>  
>  /* Return the destination address of a branch.  */
>  
> -int
> +static int
>  branch_dest (rtx branch)
>  {
>    rtx pat = PATTERN (branch);
> @@ -7215,61 +7109,6 @@ arc_return_in_memory (const_tree type, const_tree fntype ATTRIBUTE_UNUSED)
>      }
>  }
>  
> -
> -/* This was in rtlanal.c, and can go in there when we decide we want
> -   to submit the change for inclusion in the GCC tree.  */
> -/* Like note_stores, but allow the callback to have side effects on the rtl
> -   (like the note_stores of yore):
> -   Call FUN on each register or MEM that is stored into or clobbered by X.
> -   (X would be the pattern of an insn).  DATA is an arbitrary pointer,
> -   ignored by note_stores, but passed to FUN.
> -   FUN may alter parts of the RTL.
> -
> -   FUN receives three arguments:
> -   1. the REG, MEM, CC0 or PC being stored in or clobbered,
> -   2. the SET or CLOBBER rtx that does the store,
> -   3. the pointer DATA provided to note_stores.
> -
> -  If the item being stored in or clobbered is a SUBREG of a hard register,
> -  the SUBREG will be passed.  */
> -
> -/* For now.  */ static
> -void
> -walk_stores (rtx x, void (*fun) (rtx, rtx, void *), void *data)
> -{
> -  int i;
> -
> -  if (GET_CODE (x) == COND_EXEC)
> -    x = COND_EXEC_CODE (x);
> -
> -  if (GET_CODE (x) == SET || GET_CODE (x) == CLOBBER)
> -    {
> -      rtx dest = SET_DEST (x);
> -
> -      while ((GET_CODE (dest) == SUBREG
> -	      && (!REG_P (SUBREG_REG (dest))
> -		  || REGNO (SUBREG_REG (dest)) >= FIRST_PSEUDO_REGISTER))
> -	     || GET_CODE (dest) == ZERO_EXTRACT
> -	     || GET_CODE (dest) == STRICT_LOW_PART)
> -	dest = XEXP (dest, 0);
> -
> -      /* If we have a PARALLEL, SET_DEST is a list of EXPR_LIST expressions,
> -	 each of whose first operand is a register.  */
> -      if (GET_CODE (dest) == PARALLEL)
> -	{
> -	  for (i = XVECLEN (dest, 0) - 1; i >= 0; i--)
> -	    if (XEXP (XVECEXP (dest, 0, i), 0) != 0)
> -	      (*fun) (XEXP (XVECEXP (dest, 0, i), 0), x, data);
> -	}
> -      else
> -	(*fun) (dest, x, data);
> -    }
> -
> -  else if (GET_CODE (x) == PARALLEL)
> -    for (i = XVECLEN (x, 0) - 1; i >= 0; i--)
> -      walk_stores (XVECEXP (x, 0, i), fun, data);
> -}
> -
>  static bool
>  arc_pass_by_reference (cumulative_args_t ca_v ATTRIBUTE_UNUSED,
>  		       machine_mode mode ATTRIBUTE_UNUSED,
> @@ -9072,308 +8911,6 @@ arc_adjust_insn_length (rtx_insn *insn, int len, bool)
>    return len;
>  }
>  
> -/* Values for length_sensitive.  */
> -enum
> -{
> -  ARC_LS_NONE,// Jcc
> -  ARC_LS_25, // 25 bit offset, B
> -  ARC_LS_21, // 21 bit offset, Bcc
> -  ARC_LS_U13,// 13 bit unsigned offset, LP
> -  ARC_LS_10, // 10 bit offset, B_s, Beq_s, Bne_s
> -  ARC_LS_9,  //  9 bit offset, BRcc
> -  ARC_LS_8,  //  8 bit offset, BRcc_s
> -  ARC_LS_U7, //  7 bit unsigned offset, LPcc
> -  ARC_LS_7   //  7 bit offset, Bcc_s
> -};
> -
> -/* While the infrastructure patch is waiting for review, duplicate the
> -   struct definitions, to allow this file to compile.  */
> -#if 1
> -typedef struct
> -{
> -  unsigned align_set;
> -  /* Cost as a branch / call target or call return address.  */
> -  int target_cost;
> -  int fallthrough_cost;
> -  int branch_cost;
> -  int length;
> -  /* 0 for not length sensitive, 1 for largest offset range,
> - *      2 for next smaller etc.  */
> -  unsigned length_sensitive : 8;
> -  bool enabled;
> -} insn_length_variant_t;
> -
> -typedef struct insn_length_parameters_s
> -{
> -  int align_unit_log;
> -  int align_base_log;
> -  int max_variants;
> -  int (*get_variants) (rtx_insn *, int, bool, bool, insn_length_variant_t *);
> -} insn_length_parameters_t;
> -
> -static void
> -arc_insn_length_parameters (insn_length_parameters_t *ilp) ATTRIBUTE_UNUSED;
> -#endif
> -
> -static int
> -arc_get_insn_variants (rtx_insn *insn, int len, bool, bool target_p,
> -		       insn_length_variant_t *ilv)
> -{
> -  if (!NONDEBUG_INSN_P (insn))
> -    return 0;
> -  enum attr_type type;
> -  /* shorten_branches doesn't take optimize_size into account yet for the
> -     get_variants mechanism, so turn this off for now.  */
> -  if (optimize_size)
> -    return 0;
> -  if (rtx_sequence *pat = dyn_cast <rtx_sequence *> (PATTERN (insn)))
> -    {
> -      /* The interaction of a short delay slot insn with a short branch is
> -	 too weird for shorten_branches to piece together, so describe the
> -	 entire SEQUENCE.  */
> -      rtx_insn *inner;
> -      if (TARGET_UPSIZE_DBR
> -	  && get_attr_length (pat->insn (1)) <= 2
> -	  && (((type = get_attr_type (inner = pat->insn (0)))
> -	       == TYPE_UNCOND_BRANCH)
> -	      || type == TYPE_BRANCH)
> -	  && get_attr_delay_slot_filled (inner) == DELAY_SLOT_FILLED_YES)
> -	{
> -	  int n_variants
> -	    = arc_get_insn_variants (inner, get_attr_length (inner), true,
> -				     target_p, ilv+1);
> -	  /* The short variant gets split into a higher-cost aligned
> -	     and a lower cost unaligned variant.  */
> -	  gcc_assert (n_variants);
> -	  gcc_assert (ilv[1].length_sensitive == ARC_LS_7
> -		      || ilv[1].length_sensitive == ARC_LS_10);
> -	  gcc_assert (ilv[1].align_set == 3);
> -	  ilv[0] = ilv[1];
> -	  ilv[0].align_set = 1;
> -	  ilv[0].branch_cost += 1;
> -	  ilv[1].align_set = 2;
> -	  n_variants++;
> -	  for (int i = 0; i < n_variants; i++)
> -	    ilv[i].length += 2;
> -	  /* In case an instruction with aligned size is wanted, and
> -	     the short variants are unavailable / too expensive, add
> -	     versions of long branch + long delay slot.  */
> -	  for (int i = 2, end = n_variants; i < end; i++, n_variants++)
> -	    {
> -	      ilv[n_variants] = ilv[i];
> -	      ilv[n_variants].length += 2;
> -	    }
> -	  return n_variants;
> -	}
> -      return 0;
> -    }
> -  insn_length_variant_t *first_ilv = ilv;
> -  type = get_attr_type (insn);
> -  bool delay_filled
> -    = (get_attr_delay_slot_filled (insn) == DELAY_SLOT_FILLED_YES);
> -  int branch_align_cost = delay_filled ? 0 : 1;
> -  int branch_unalign_cost = delay_filled ? 0 : TARGET_UNALIGN_BRANCH ? 0 : 1;
> -  /* If the previous instruction is an sfunc call, this insn is always
> -     a target, even though the middle-end is unaware of this.  */
> -  bool force_target = false;
> -  rtx_insn *prev = prev_active_insn (insn);
> -  if (prev && arc_next_active_insn (prev, 0) == insn
> -      && ((NONJUMP_INSN_P (prev) && GET_CODE (PATTERN (prev)) == SEQUENCE)
> -	  ? CALL_ATTR (as_a <rtx_sequence *> (PATTERN (prev))->insn (0),
> -		       NON_SIBCALL)
> -	  : (CALL_ATTR (prev, NON_SIBCALL)
> -	     && NEXT_INSN (PREV_INSN (prev)) == prev)))
> -    force_target = true;
> -
> -  switch (type)
> -    {
> -    case TYPE_BRCC:
> -      /* Short BRCC only comes in no-delay-slot version, and without limm  */
> -      if (!delay_filled)
> -	{
> -	  ilv->align_set = 3;
> -	  ilv->length = 2;
> -	  ilv->branch_cost = 1;
> -	  ilv->enabled = (len == 2);
> -	  ilv->length_sensitive = ARC_LS_8;
> -	  ilv++;
> -	}
> -      /* Fall through.  */
> -    case TYPE_BRCC_NO_DELAY_SLOT:
> -      /* doloop_fallback* patterns are TYPE_BRCC_NO_DELAY_SLOT for
> -	 (delay slot) scheduling purposes, but they are longer.  */
> -      if (GET_CODE (PATTERN (insn)) == PARALLEL
> -	  && GET_CODE (XVECEXP (PATTERN (insn), 0, 1)) == SET)
> -	return 0;
> -      /* Standard BRCC: 4 bytes, or 8 bytes with limm.  */
> -      ilv->length = ((type == TYPE_BRCC) ? 4 : 8);
> -      ilv->align_set = 3;
> -      ilv->branch_cost = branch_align_cost;
> -      ilv->enabled = (len <= ilv->length);
> -      ilv->length_sensitive = ARC_LS_9;
> -      if ((target_p || force_target)
> -	  || (!delay_filled && TARGET_UNALIGN_BRANCH))
> -	{
> -	  ilv[1] = *ilv;
> -	  ilv->align_set = 1;
> -	  ilv++;
> -	  ilv->align_set = 2;
> -	  ilv->target_cost = 1;
> -	  ilv->branch_cost = branch_unalign_cost;
> -	}
> -      ilv++;
> -
> -      rtx op, op0;
> -      op = XEXP (SET_SRC (XVECEXP (PATTERN (insn), 0, 0)), 0);
> -      op0 = XEXP (op, 0);
> -
> -      if (GET_CODE (op0) == ZERO_EXTRACT
> -	  && satisfies_constraint_L (XEXP (op0, 2)))
> -	op0 = XEXP (op0, 0);
> -      if (satisfies_constraint_Rcq (op0))
> -	{
> -	  ilv->length = ((type == TYPE_BRCC) ? 6 : 10);
> -	  ilv->align_set = 3;
> -	  ilv->branch_cost = 1 + branch_align_cost;
> -	  ilv->fallthrough_cost = 1;
> -	  ilv->enabled = true;
> -	  ilv->length_sensitive = ARC_LS_21;
> -	  if (!delay_filled && TARGET_UNALIGN_BRANCH)
> -	    {
> -	      ilv[1] = *ilv;
> -	      ilv->align_set = 1;
> -	      ilv++;
> -	      ilv->align_set = 2;
> -	      ilv->branch_cost = 1 + branch_unalign_cost;
> -	    }
> -	  ilv++;
> -	}
> -      ilv->length = ((type == TYPE_BRCC) ? 8 : 12);
> -      ilv->align_set = 3;
> -      ilv->branch_cost = 1 + branch_align_cost;
> -      ilv->fallthrough_cost = 1;
> -      ilv->enabled = true;
> -      ilv->length_sensitive = ARC_LS_21;
> -      if ((target_p || force_target)
> -	  || (!delay_filled && TARGET_UNALIGN_BRANCH))
> -	{
> -	  ilv[1] = *ilv;
> -	  ilv->align_set = 1;
> -	  ilv++;
> -	  ilv->align_set = 2;
> -	  ilv->target_cost = 1;
> -	  ilv->branch_cost = 1 + branch_unalign_cost;
> -	}
> -      ilv++;
> -      break;
> -
> -    case TYPE_SFUNC:
> -      ilv->length = 12;
> -      goto do_call;
> -    case TYPE_CALL_NO_DELAY_SLOT:
> -      ilv->length = 8;
> -      goto do_call;
> -    case TYPE_CALL:
> -      ilv->length = 4;
> -      ilv->length_sensitive
> -	= GET_CODE (PATTERN (insn)) == COND_EXEC ? ARC_LS_21 : ARC_LS_25;
> -    do_call:
> -      ilv->align_set = 3;
> -      ilv->fallthrough_cost = branch_align_cost;
> -      ilv->enabled = true;
> -      if ((target_p || force_target)
> -	  || (!delay_filled && TARGET_UNALIGN_BRANCH))
> -	{
> -	  ilv[1] = *ilv;
> -	  ilv->align_set = 1;
> -	  ilv++;
> -	  ilv->align_set = 2;
> -	  ilv->target_cost = 1;
> -	  ilv->fallthrough_cost = branch_unalign_cost;
> -	}
> -      ilv++;
> -      break;
> -    case TYPE_UNCOND_BRANCH:
> -      /* Strictly speaking, this should be ARC_LS_10 for equality comparisons,
> -	 but that makes no difference at the moment.  */
> -      ilv->length_sensitive = ARC_LS_7;
> -      ilv[1].length_sensitive = ARC_LS_25;
> -      goto do_branch;
> -    case TYPE_BRANCH:
> -      ilv->length_sensitive = ARC_LS_10;
> -      ilv[1].length_sensitive = ARC_LS_21;
> -    do_branch:
> -      ilv->align_set = 3;
> -      ilv->length = 2;
> -      ilv->branch_cost = branch_align_cost;
> -      ilv->enabled = (len == ilv->length);
> -      ilv++;
> -      ilv->length = 4;
> -      ilv->align_set = 3;
> -      ilv->branch_cost = branch_align_cost;
> -      ilv->enabled = true;
> -      if ((target_p || force_target)
> -	  || (!delay_filled && TARGET_UNALIGN_BRANCH))
> -	{
> -	  ilv[1] = *ilv;
> -	  ilv->align_set = 1;
> -	  ilv++;
> -	  ilv->align_set = 2;
> -	  ilv->target_cost = 1;
> -	  ilv->branch_cost = branch_unalign_cost;
> -	}
> -      ilv++;
> -      break;
> -    case TYPE_JUMP:
> -      return 0;
> -    default:
> -      /* For every short insn, there is generally also a long insn.
> -	 trap_s is an exception.  */
> -      if ((len & 2) == 0 || recog_memoized (insn) == CODE_FOR_trap_s)
> -	return 0;
> -      ilv->align_set = 3;
> -      ilv->length = len;
> -      ilv->enabled = 1;
> -      ilv++;
> -      ilv->align_set = 3;
> -      ilv->length = len + 2;
> -      ilv->enabled = 1;
> -      if (target_p || force_target)
> -	{
> -	  ilv[1] = *ilv;
> -	  ilv->align_set = 1;
> -	  ilv++;
> -	  ilv->align_set = 2;
> -	  ilv->target_cost = 1;
> -	}
> -      ilv++;
> -    }
> -  /* If the previous instruction is an sfunc call, this insn is always
> -     a target, even though the middle-end is unaware of this.
> -     Therefore, if we have a call predecessor, transfer the target cost
> -     to the fallthrough and branch costs.  */
> -  if (force_target)
> -    {
> -      for (insn_length_variant_t *p = first_ilv; p < ilv; p++)
> -	{
> -	  p->fallthrough_cost += p->target_cost;
> -	  p->branch_cost += p->target_cost;
> -	  p->target_cost = 0;
> -	}
> -    }
> -
> -  return ilv - first_ilv;
> -}
> -
> -static void
> -arc_insn_length_parameters (insn_length_parameters_t *ilp)
> -{
> -  ilp->align_unit_log = 1;
> -  ilp->align_base_log = 1;
> -  ilp->max_variants = 7;
> -  ilp->get_variants = arc_get_insn_variants;
> -}
> -
>  /* Return a copy of COND from *STATEP, inverted if that is indicated by the
>     CC field of *STATEP.  */
>  
> @@ -10292,7 +9829,7 @@ arc_regno_use_in (unsigned int regno, rtx x)
>  /* Return the integer value of the "type" attribute for INSN, or -1 if
>     INSN can't have attributes.  */
>  
> -int
> +static int
>  arc_attr_type (rtx_insn *insn)
>  {
>    if (NONJUMP_INSN_P (insn)
> diff --git a/gcc/config/arc/arc.h b/gcc/config/arc/arc.h
> index 90612177729..25f44e41a16 100644
> --- a/gcc/config/arc/arc.h
> +++ b/gcc/config/arc/arc.h
> @@ -141,9 +141,6 @@ extern const char *arc_cpu_to_as (int argc, const char **argv);
>  /* Should we try to unalign likely taken branches without a delay slot.  */
>  #define TARGET_UNALIGN_BRANCH (TARGET_ARC700 && !optimize_size)
>  
> -/* Should we upsize short delayed branches with a short delay insn?  */
> -#define TARGET_UPSIZE_DBR (TARGET_ARC700 && !optimize_size)
> -
>  /* Should we add padding before a return insn to avoid mispredict?  */
>  #define TARGET_PAD_RETURN (TARGET_ARC700 && !optimize_size)
>  
> -- 
> 2.14.3
> 


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]