This is the mail archive of the gcc-patches@gcc.gnu.org mailing list for the GCC project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[52/77] Use scalar_int_mode in extract/store_bit_field


After a certain point, extract_bit_field and store_bit_field
ensure that they're dealing with integer modes or BLKmode MEMs.
This patch uses scalar_int_mode and opt_scalar_int_mode for
those parts.

2017-07-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

gcc/
	* expmed.c (store_bit_field_using_insv): Add op0_mode and
	value_mode arguments.  Use scalar_int_mode internally.
	(store_bit_field_1): Rename the new integer mode from imode
	to op0_mode and use it instead of GET_MODE (op0).  Update calls
	to store_split_bit_field, store_bit_field_using_insv and
	store_fixed_bit_field.
	(store_fixed_bit_field): Add op0_mode and value_mode arguments.
	Use scalar_int_mode internally.  Use a bit count rather than a mode
	when calculating the largest bit size for get_best_mode.
	Update calls to store_split_bit_field and store_fixed_bit_field_1.
	(store_fixed_bit_field_1): Add mode and value_mode arguments.
	Remove assertion that OP0 has a scalar integer mode.
	(store_split_bit_field): Add op0_mode and value_mode arguments.
	Update calls to extract_fixed_bit_field.
	(extract_bit_field_using_extv): Add an op0_mode argument.
	Use scalar_int_mode internally.
	(extract_bit_field_1): Rename the new integer mode from imode to
	op0_mode and use it instead of GET_MODE (op0).  Update calls to
	extract_split_bit_field, extract_bit_field_using_extv and
	extract_fixed_bit_field.
	(extract_fixed_bit_field): Add an op0_mode argument.  Update calls
	to extract_split_bit_field and extract_fixed_bit_field_1.
	(extract_fixed_bit_field_1): Add a mode argument.  Remove assertion
	that OP0 has a scalar integer mode.  Use as_a <scalar_int_mode>
	on the target mode.
	(extract_split_bit_field): Add an op0_mode argument.  Update call
	to extract_fixed_bit_field.

Index: gcc/expmed.c
===================================================================
--- gcc/expmed.c	2017-07-13 09:18:46.700153153 +0100
+++ gcc/expmed.c	2017-07-13 09:18:47.197114027 +0100
@@ -45,27 +45,31 @@ struct target_expmed default_target_expm
 struct target_expmed *this_target_expmed = &default_target_expmed;
 #endif
 
-static void store_fixed_bit_field (rtx, unsigned HOST_WIDE_INT,
+static void store_fixed_bit_field (rtx, opt_scalar_int_mode,
 				   unsigned HOST_WIDE_INT,
 				   unsigned HOST_WIDE_INT,
 				   unsigned HOST_WIDE_INT,
-				   rtx, bool);
-static void store_fixed_bit_field_1 (rtx, unsigned HOST_WIDE_INT,
+				   unsigned HOST_WIDE_INT,
+				   rtx, scalar_int_mode, bool);
+static void store_fixed_bit_field_1 (rtx, scalar_int_mode,
+				     unsigned HOST_WIDE_INT,
 				     unsigned HOST_WIDE_INT,
-				     rtx, bool);
-static void store_split_bit_field (rtx, unsigned HOST_WIDE_INT,
+				     rtx, scalar_int_mode, bool);
+static void store_split_bit_field (rtx, opt_scalar_int_mode,
 				   unsigned HOST_WIDE_INT,
 				   unsigned HOST_WIDE_INT,
 				   unsigned HOST_WIDE_INT,
-				   rtx, bool);
-static rtx extract_fixed_bit_field (machine_mode, rtx,
+				   unsigned HOST_WIDE_INT,
+				   rtx, scalar_int_mode, bool);
+static rtx extract_fixed_bit_field (machine_mode, rtx, opt_scalar_int_mode,
 				    unsigned HOST_WIDE_INT,
 				    unsigned HOST_WIDE_INT, rtx, int, bool);
-static rtx extract_fixed_bit_field_1 (machine_mode, rtx,
+static rtx extract_fixed_bit_field_1 (machine_mode, rtx, scalar_int_mode,
 				      unsigned HOST_WIDE_INT,
 				      unsigned HOST_WIDE_INT, rtx, int, bool);
 static rtx lshift_value (machine_mode, unsigned HOST_WIDE_INT, int);
-static rtx extract_split_bit_field (rtx, unsigned HOST_WIDE_INT,
+static rtx extract_split_bit_field (rtx, opt_scalar_int_mode,
+				    unsigned HOST_WIDE_INT,
 				    unsigned HOST_WIDE_INT, int, bool);
 static void do_cmp_and_jump (rtx, rtx, enum rtx_code, machine_mode, rtx_code_label *);
 static rtx expand_smod_pow2 (machine_mode, rtx, HOST_WIDE_INT);
@@ -568,13 +572,16 @@ simple_mem_bitfield_p (rtx op0, unsigned
 }
 
 /* Try to use instruction INSV to store VALUE into a field of OP0.
-   BITSIZE and BITNUM are as for store_bit_field.  */
+   If OP0_MODE is defined, it is the mode of OP0, otherwise OP0 is a
+   BLKmode MEM.  VALUE_MODE is the mode of VALUE.  BITSIZE and BITNUM
+   are as for store_bit_field.  */
 
 static bool
 store_bit_field_using_insv (const extraction_insn *insv, rtx op0,
+			    opt_scalar_int_mode op0_mode,
 			    unsigned HOST_WIDE_INT bitsize,
 			    unsigned HOST_WIDE_INT bitnum,
-			    rtx value)
+			    rtx value, scalar_int_mode value_mode)
 {
   struct expand_operand ops[4];
   rtx value1;
@@ -582,7 +589,7 @@ store_bit_field_using_insv (const extrac
   rtx_insn *last = get_last_insn ();
   bool copy_back = false;
 
-  machine_mode op_mode = insv->field_mode;
+  scalar_int_mode op_mode = insv->field_mode;
   unsigned int unit = GET_MODE_BITSIZE (op_mode);
   if (bitsize == 0 || bitsize > unit)
     return false;
@@ -595,7 +602,7 @@ store_bit_field_using_insv (const extrac
     {
       /* Convert from counting within OP0 to counting in OP_MODE.  */
       if (BYTES_BIG_ENDIAN)
-	bitnum += unit - GET_MODE_BITSIZE (GET_MODE (op0));
+	bitnum += unit - GET_MODE_BITSIZE (*op0_mode);
 
       /* If xop0 is a register, we need it in OP_MODE
 	 to make it acceptable to the format of insv.  */
@@ -648,30 +655,28 @@ store_bit_field_using_insv (const extrac
 
   /* Convert VALUE to op_mode (which insv insn wants) in VALUE1.  */
   value1 = value;
-  if (GET_MODE (value) != op_mode)
+  if (value_mode != op_mode)
     {
-      if (GET_MODE_BITSIZE (GET_MODE (value)) >= bitsize)
+      if (GET_MODE_BITSIZE (value_mode) >= bitsize)
 	{
 	  rtx tmp;
 	  /* Optimization: Don't bother really extending VALUE
 	     if it has all the bits we will actually use.  However,
 	     if we must narrow it, be sure we do it correctly.  */
 
-	  if (GET_MODE_SIZE (GET_MODE (value)) < GET_MODE_SIZE (op_mode))
+	  if (GET_MODE_SIZE (value_mode) < GET_MODE_SIZE (op_mode))
 	    {
-	      tmp = simplify_subreg (op_mode, value1, GET_MODE (value), 0);
+	      tmp = simplify_subreg (op_mode, value1, value_mode, 0);
 	      if (! tmp)
 		tmp = simplify_gen_subreg (op_mode,
-					   force_reg (GET_MODE (value),
-						      value1),
-					   GET_MODE (value), 0);
+					   force_reg (value_mode, value1),
+					   value_mode, 0);
 	    }
 	  else
 	    {
 	      tmp = gen_lowpart_if_possible (op_mode, value1);
 	      if (! tmp)
-		tmp = gen_lowpart (op_mode, force_reg (GET_MODE (value),
-						       value1));
+		tmp = gen_lowpart (op_mode, force_reg (value_mode, value1));
 	    }
 	  value1 = tmp;
 	}
@@ -826,14 +831,14 @@ store_bit_field_1 (rtx str_rtx, unsigned
      if we aren't.  This must come after the entire register case above,
      since that case is valid for any mode.  The following cases are only
      valid for integral modes.  */
-  opt_scalar_int_mode imode = int_mode_for_mode (GET_MODE (op0));
-  if (!imode.exists () || *imode != GET_MODE (op0))
+  opt_scalar_int_mode op0_mode = int_mode_for_mode (GET_MODE (op0));
+  if (!op0_mode.exists () || *op0_mode != GET_MODE (op0))
     {
       if (MEM_P (op0))
-	op0 = adjust_bitfield_address_size (op0, imode.else_blk (),
+	op0 = adjust_bitfield_address_size (op0, op0_mode.else_blk (),
 					    0, MEM_SIZE (op0));
       else
-	op0 = gen_lowpart (*imode, op0);
+	op0 = gen_lowpart (*op0_mode, op0);
     }
 
   /* Storing an lsb-aligned field in a register
@@ -945,11 +950,15 @@ store_bit_field_1 (rtx str_rtx, unsigned
      with 64 bit registers that uses SFmode for float.  It can also
      occur for unaligned float or complex fields.  */
   orig_value = value;
-  if (GET_MODE (value) != VOIDmode
-      && GET_MODE_CLASS (GET_MODE (value)) != MODE_INT
-      && GET_MODE_CLASS (GET_MODE (value)) != MODE_PARTIAL_INT)
+  scalar_int_mode value_mode;
+  if (GET_MODE (value) == VOIDmode)
+    /* By this point we've dealt with values that are bigger than a word,
+       so word_mode is a conservatively correct choice.  */
+    value_mode = word_mode;
+  else if (!is_a <scalar_int_mode> (GET_MODE (value), &value_mode))
     {
-      value = gen_reg_rtx (*int_mode_for_mode (GET_MODE (value)));
+      value_mode = *int_mode_for_mode (GET_MODE (value));
+      value = gen_reg_rtx (value_mode);
       emit_move_insn (gen_lowpart (GET_MODE (orig_value), value), orig_value);
     }
 
@@ -958,23 +967,25 @@ store_bit_field_1 (rtx str_rtx, unsigned
      Don't do this if op0 is a single hard register wider than word
      such as a float or vector register.  */
   if (!MEM_P (op0)
-      && GET_MODE_SIZE (GET_MODE (op0)) > UNITS_PER_WORD
+      && GET_MODE_SIZE (*op0_mode) > UNITS_PER_WORD
       && (!REG_P (op0)
 	  || !HARD_REGISTER_P (op0)
-	  || HARD_REGNO_NREGS (REGNO (op0), GET_MODE (op0)) != 1))
+	  || HARD_REGNO_NREGS (REGNO (op0), *op0_mode) != 1))
     {
       if (bitnum % BITS_PER_WORD + bitsize > BITS_PER_WORD)
 	{
 	  if (!fallback_p)
 	    return false;
 
-	  store_split_bit_field (op0, bitsize, bitnum, bitregion_start,
-				 bitregion_end, value, reverse);
+	  store_split_bit_field (op0, op0_mode, bitsize, bitnum,
+				 bitregion_start, bitregion_end,
+				 value, value_mode, reverse);
 	  return true;
 	}
-      op0 = simplify_gen_subreg (word_mode, op0, GET_MODE (op0),
+      op0 = simplify_gen_subreg (word_mode, op0, *op0_mode,
 				 bitnum / BITS_PER_WORD * UNITS_PER_WORD);
       gcc_assert (op0);
+      op0_mode = word_mode;
       bitnum %= BITS_PER_WORD;
     }
 
@@ -986,9 +997,10 @@ store_bit_field_1 (rtx str_rtx, unsigned
   if (!MEM_P (op0)
       && !reverse
       && get_best_reg_extraction_insn (&insv, EP_insv,
-				       GET_MODE_BITSIZE (GET_MODE (op0)),
+				       GET_MODE_BITSIZE (*op0_mode),
 				       fieldmode)
-      && store_bit_field_using_insv (&insv, op0, bitsize, bitnum, value))
+      && store_bit_field_using_insv (&insv, op0, op0_mode,
+				     bitsize, bitnum, value, value_mode))
     return true;
 
   /* If OP0 is a memory, try copying it to a register and seeing if a
@@ -997,7 +1009,8 @@ store_bit_field_1 (rtx str_rtx, unsigned
     {
       if (get_best_mem_extraction_insn (&insv, EP_insv, bitsize, bitnum,
 					fieldmode)
-	  && store_bit_field_using_insv (&insv, op0, bitsize, bitnum, value))
+	  && store_bit_field_using_insv (&insv, op0, op0_mode,
+					 bitsize, bitnum, value, value_mode))
 	return true;
 
       rtx_insn *last = get_last_insn ();
@@ -1025,8 +1038,8 @@ store_bit_field_1 (rtx str_rtx, unsigned
   if (!fallback_p)
     return false;
 
-  store_fixed_bit_field (op0, bitsize, bitnum, bitregion_start,
-			 bitregion_end, value, reverse);
+  store_fixed_bit_field (op0, op0_mode, bitsize, bitnum, bitregion_start,
+			 bitregion_end, value, value_mode, reverse);
   return true;
 }
 
@@ -1120,16 +1133,19 @@ store_bit_field (rtx str_rtx, unsigned H
 }
 
 /* Use shifts and boolean operations to store VALUE into a bit field of
-   width BITSIZE in OP0, starting at bit BITNUM.
+   width BITSIZE in OP0, starting at bit BITNUM.  If OP0_MODE is defined,
+   it is the mode of OP0, otherwise OP0 is a BLKmode MEM.  VALUE_MODE is
+   the mode of VALUE.
 
    If REVERSE is true, the store is to be done in reverse order.  */
 
 static void
-store_fixed_bit_field (rtx op0, unsigned HOST_WIDE_INT bitsize,
+store_fixed_bit_field (rtx op0, opt_scalar_int_mode op0_mode,
+		       unsigned HOST_WIDE_INT bitsize,
 		       unsigned HOST_WIDE_INT bitnum,
 		       unsigned HOST_WIDE_INT bitregion_start,
 		       unsigned HOST_WIDE_INT bitregion_end,
-		       rtx value, bool reverse)
+		       rtx value, scalar_int_mode value_mode, bool reverse)
 {
   /* There is a case not handled here:
      a structure with a known alignment of just a halfword
@@ -1138,46 +1154,48 @@ store_fixed_bit_field (rtx op0, unsigned
      and a field split across two bytes.
      Such cases are not supposed to be able to occur.  */
 
+  scalar_int_mode best_mode;
   if (MEM_P (op0))
     {
-      machine_mode mode = GET_MODE (op0);
-      if (GET_MODE_BITSIZE (mode) == 0
-	  || GET_MODE_BITSIZE (mode) > GET_MODE_BITSIZE (word_mode))
-	mode = word_mode;
-      scalar_int_mode best_mode;
+      unsigned int max_bitsize = BITS_PER_WORD;
+      if (op0_mode.exists () && GET_MODE_BITSIZE (*op0_mode) < max_bitsize)
+	max_bitsize = GET_MODE_BITSIZE (*op0_mode);
+
       if (!get_best_mode (bitsize, bitnum, bitregion_start, bitregion_end,
-			  MEM_ALIGN (op0), GET_MODE_BITSIZE (mode),
-			  MEM_VOLATILE_P (op0), &best_mode))
+			  MEM_ALIGN (op0), max_bitsize, MEM_VOLATILE_P (op0),
+			  &best_mode))
 	{
 	  /* The only way this should occur is if the field spans word
 	     boundaries.  */
-	  store_split_bit_field (op0, bitsize, bitnum, bitregion_start,
-				 bitregion_end, value, reverse);
+	  store_split_bit_field (op0, op0_mode, bitsize, bitnum,
+				 bitregion_start, bitregion_end,
+				 value, value_mode, reverse);
 	  return;
 	}
 
       op0 = narrow_bit_field_mem (op0, best_mode, bitsize, bitnum, &bitnum);
     }
+  else
+    best_mode = *op0_mode;
 
-  store_fixed_bit_field_1 (op0, bitsize, bitnum, value, reverse);
+  store_fixed_bit_field_1 (op0, best_mode, bitsize, bitnum,
+			   value, value_mode, reverse);
 }
 
 /* Helper function for store_fixed_bit_field, stores
-   the bit field always using the MODE of OP0.  */
+   the bit field always using MODE, which is the mode of OP0.  The other
+   arguments are as for store_fixed_bit_field.  */
 
 static void
-store_fixed_bit_field_1 (rtx op0, unsigned HOST_WIDE_INT bitsize,
+store_fixed_bit_field_1 (rtx op0, scalar_int_mode mode,
+			 unsigned HOST_WIDE_INT bitsize,
 			 unsigned HOST_WIDE_INT bitnum,
-			 rtx value, bool reverse)
+			 rtx value, scalar_int_mode value_mode, bool reverse)
 {
-  machine_mode mode;
   rtx temp;
   int all_zero = 0;
   int all_one = 0;
 
-  mode = GET_MODE (op0);
-  gcc_assert (SCALAR_INT_MODE_P (mode));
-
   /* Note that bitsize + bitnum can be greater than GET_MODE_BITSIZE (mode)
      for invalid input, such as f5 from gcc.dg/pr48335-2.c.  */
 
@@ -1212,10 +1230,10 @@ store_fixed_bit_field_1 (rtx op0, unsign
     }
   else
     {
-      int must_and = (GET_MODE_BITSIZE (GET_MODE (value)) != bitsize
+      int must_and = (GET_MODE_BITSIZE (value_mode) != bitsize
 		      && bitnum + bitsize != GET_MODE_BITSIZE (mode));
 
-      if (GET_MODE (value) != mode)
+      if (value_mode != mode)
 	value = convert_to_mode (mode, value, 1);
 
       if (must_and)
@@ -1268,18 +1286,21 @@ store_fixed_bit_field_1 (rtx op0, unsign
    OP0 is the REG, SUBREG or MEM rtx for the first of the objects.
    BITSIZE is the field width; BITPOS the position of its first bit
    (within the word).
-   VALUE is the value to store.
+   VALUE is the value to store, which has mode VALUE_MODE.
+   If OP0_MODE is defined, it is the mode of OP0, otherwise OP0 is
+   a BLKmode MEM.
 
    If REVERSE is true, the store is to be done in reverse order.
 
    This does not yet handle fields wider than BITS_PER_WORD.  */
 
 static void
-store_split_bit_field (rtx op0, unsigned HOST_WIDE_INT bitsize,
+store_split_bit_field (rtx op0, opt_scalar_int_mode op0_mode,
+		       unsigned HOST_WIDE_INT bitsize,
 		       unsigned HOST_WIDE_INT bitpos,
 		       unsigned HOST_WIDE_INT bitregion_start,
 		       unsigned HOST_WIDE_INT bitregion_end,
-		       rtx value, bool reverse)
+		       rtx value, scalar_int_mode value_mode, bool reverse)
 {
   unsigned int unit, total_bits, bitsdone = 0;
 
@@ -1293,8 +1314,8 @@ store_split_bit_field (rtx op0, unsigned
   /* If OP0 is a memory with a mode, then UNIT must not be larger than
      OP0's mode as well.  Otherwise, store_fixed_bit_field will call us
      again, and we will mutually recurse forever.  */
-  if (MEM_P (op0) && GET_MODE_BITSIZE (GET_MODE (op0)) > 0)
-    unit = MIN (unit, GET_MODE_BITSIZE (GET_MODE (op0)));
+  if (MEM_P (op0) && op0_mode.exists ())
+    unit = MIN (unit, GET_MODE_BITSIZE (*op0_mode));
 
   /* If VALUE is a constant other than a CONST_INT, get it into a register in
      WORD_MODE.  If we can do this using gen_lowpart_common, do so.  Note
@@ -1306,20 +1327,18 @@ store_split_bit_field (rtx op0, unsigned
       if (word && (value != word))
 	value = word;
       else
-	value = gen_lowpart_common (word_mode,
-				    force_reg (GET_MODE (value) != VOIDmode
-					       ? GET_MODE (value)
-					       : word_mode, value));
+	value = gen_lowpart_common (word_mode, force_reg (value_mode, value));
+      value_mode = word_mode;
     }
 
-  total_bits = GET_MODE_BITSIZE (GET_MODE (value));
+  total_bits = GET_MODE_BITSIZE (value_mode);
 
   while (bitsdone < bitsize)
     {
       unsigned HOST_WIDE_INT thissize;
       unsigned HOST_WIDE_INT thispos;
       unsigned HOST_WIDE_INT offset;
-      rtx part, word;
+      rtx part;
 
       offset = (bitpos + bitsdone) / unit;
       thispos = (bitpos + bitsdone) % unit;
@@ -1353,19 +1372,18 @@ store_split_bit_field (rtx op0, unsigned
 			    & ((HOST_WIDE_INT_1 << thissize) - 1));
           /* Likewise, but the source is little-endian.  */
           else if (reverse)
-	    part = extract_fixed_bit_field (word_mode, value, thissize,
+	    part = extract_fixed_bit_field (word_mode, value, value_mode,
+					    thissize,
 					    bitsize - bitsdone - thissize,
 					    NULL_RTX, 1, false);
 	  else
-	    {
-	      int total_bits = GET_MODE_BITSIZE (GET_MODE (value));
-	      /* The args are chosen so that the last part includes the
-		 lsb.  Give extract_bit_field the value it needs (with
-		 endianness compensation) to fetch the piece we want.  */
-	      part = extract_fixed_bit_field (word_mode, value, thissize,
-					      total_bits - bitsize + bitsdone,
-					      NULL_RTX, 1, false);
-	    }
+	    /* The args are chosen so that the last part includes the
+	       lsb.  Give extract_bit_field the value it needs (with
+	       endianness compensation) to fetch the piece we want.  */
+	    part = extract_fixed_bit_field (word_mode, value, value_mode,
+					    thissize,
+					    total_bits - bitsize + bitsdone,
+					    NULL_RTX, 1, false);
 	}
       else
 	{
@@ -1376,34 +1394,42 @@ store_split_bit_field (rtx op0, unsigned
 			    & ((HOST_WIDE_INT_1 << thissize) - 1));
 	  /* Likewise, but the source is big-endian.  */
           else if (reverse)
-	    part = extract_fixed_bit_field (word_mode, value, thissize,
+	    part = extract_fixed_bit_field (word_mode, value, value_mode,
+					    thissize,
 					    total_bits - bitsdone - thissize,
 					    NULL_RTX, 1, false);
 	  else
-	    part = extract_fixed_bit_field (word_mode, value, thissize,
-					    bitsdone, NULL_RTX, 1, false);
+	    part = extract_fixed_bit_field (word_mode, value, value_mode,
+					    thissize, bitsdone, NULL_RTX,
+					    1, false);
 	}
 
       /* If OP0 is a register, then handle OFFSET here.  */
+      rtx op0_piece = op0;
+      opt_scalar_int_mode op0_piece_mode = op0_mode;
       if (SUBREG_P (op0) || REG_P (op0))
 	{
-	  machine_mode op0_mode = GET_MODE (op0);
-	  if (op0_mode != BLKmode && GET_MODE_SIZE (op0_mode) < UNITS_PER_WORD)
-	    word = offset ? const0_rtx : op0;
+	  if (op0_mode.exists () && GET_MODE_SIZE (*op0_mode) < UNITS_PER_WORD)
+	    {
+	      if (offset)
+		op0_piece = const0_rtx;
+	    }
 	  else
-	    word = operand_subword_force (op0, offset * unit / BITS_PER_WORD,
-					  GET_MODE (op0));
+	    {
+	      op0_piece = operand_subword_force (op0,
+						 offset * unit / BITS_PER_WORD,
+						 GET_MODE (op0));
+	      op0_piece_mode = word_mode;
+	    }
 	  offset &= BITS_PER_WORD / unit - 1;
 	}
-      else
-	word = op0;
 
       /* OFFSET is in UNITs, and UNIT is in bits.  If WORD is const0_rtx,
 	 it is just an out-of-bounds access.  Ignore it.  */
-      if (word != const0_rtx)
-	store_fixed_bit_field (word, thissize, offset * unit + thispos,
-			       bitregion_start, bitregion_end, part,
-			       reverse);
+      if (op0_piece != const0_rtx)
+	store_fixed_bit_field (op0_piece, op0_piece_mode, thissize,
+			       offset * unit + thispos, bitregion_start,
+			       bitregion_end, part, word_mode, reverse);
       bitsdone += thissize;
     }
 }
@@ -1435,11 +1461,13 @@ convert_extracted_bit_field (rtx x, mach
 
 /* Try to use an ext(z)v pattern to extract a field from OP0.
    Return the extracted value on success, otherwise return null.
-   EXT_MODE is the mode of the extraction and the other arguments
-   are as for extract_bit_field.  */
+   EXTV describes the extraction instruction to use.  If OP0_MODE
+   is defined, it is the mode of OP0, otherwise OP0 is a BLKmode MEM.
+   The other arguments are as for extract_bit_field.  */
 
 static rtx
 extract_bit_field_using_extv (const extraction_insn *extv, rtx op0,
+			      opt_scalar_int_mode op0_mode,
 			      unsigned HOST_WIDE_INT bitsize,
 			      unsigned HOST_WIDE_INT bitnum,
 			      int unsignedp, rtx target,
@@ -1448,7 +1476,7 @@ extract_bit_field_using_extv (const extr
   struct expand_operand ops[4];
   rtx spec_target = target;
   rtx spec_target_subreg = 0;
-  machine_mode ext_mode = extv->field_mode;
+  scalar_int_mode ext_mode = extv->field_mode;
   unsigned unit = GET_MODE_BITSIZE (ext_mode);
 
   if (bitsize == 0 || unit < bitsize)
@@ -1462,13 +1490,13 @@ extract_bit_field_using_extv (const extr
     {
       /* Convert from counting within OP0 to counting in EXT_MODE.  */
       if (BYTES_BIG_ENDIAN)
-	bitnum += unit - GET_MODE_BITSIZE (GET_MODE (op0));
+	bitnum += unit - GET_MODE_BITSIZE (*op0_mode);
 
       /* If op0 is a register, we need it in EXT_MODE to make it
 	 acceptable to the format of ext(z)v.  */
-      if (GET_CODE (op0) == SUBREG && GET_MODE (op0) != ext_mode)
+      if (GET_CODE (op0) == SUBREG && *op0_mode != ext_mode)
 	return NULL_RTX;
-      if (REG_P (op0) && GET_MODE (op0) != ext_mode)
+      if (REG_P (op0) && *op0_mode != ext_mode)
 	op0 = gen_lowpart_SUBREG (ext_mode, op0);
     }
 
@@ -1617,20 +1645,20 @@ extract_bit_field_1 (rtx str_rtx, unsign
 
   /* Make sure we are playing with integral modes.  Pun with subregs
      if we aren't.  */
-  opt_scalar_int_mode imode = int_mode_for_mode (GET_MODE (op0));
-  if (!imode.exists () || *imode != GET_MODE (op0))
+  opt_scalar_int_mode op0_mode = int_mode_for_mode (GET_MODE (op0));
+  if (!op0_mode.exists () || *op0_mode != GET_MODE (op0))
     {
       if (MEM_P (op0))
-	op0 = adjust_bitfield_address_size (op0, imode.else_blk (),
+	op0 = adjust_bitfield_address_size (op0, op0_mode.else_blk (),
 					    0, MEM_SIZE (op0));
-      else if (imode.exists ())
+      else if (op0_mode.exists ())
 	{
-	  op0 = gen_lowpart (*imode, op0);
+	  op0 = gen_lowpart (*op0_mode, op0);
 
 	  /* If we got a SUBREG, force it into a register since we
 	     aren't going to be able to do another SUBREG on it.  */
 	  if (GET_CODE (op0) == SUBREG)
-	    op0 = force_reg (*imode, op0);
+	    op0 = force_reg (*op0_mode, op0);
 	}
       else
 	{
@@ -1662,11 +1690,11 @@ extract_bit_field_1 (rtx str_rtx, unsign
      bit of either OP0 or a word of OP0.  */
   if (!MEM_P (op0)
       && !reverse
-      && lowpart_bit_field_p (bitnum, bitsize, GET_MODE (op0))
+      && lowpart_bit_field_p (bitnum, bitsize, *op0_mode)
       && bitsize == GET_MODE_BITSIZE (mode1)
-      && TRULY_NOOP_TRUNCATION_MODES_P (mode1, GET_MODE (op0)))
+      && TRULY_NOOP_TRUNCATION_MODES_P (mode1, *op0_mode))
     {
-      rtx sub = simplify_gen_subreg (mode1, op0, GET_MODE (op0),
+      rtx sub = simplify_gen_subreg (mode1, op0, *op0_mode,
 				     bitnum / BITS_PER_UNIT);
       if (sub)
 	return convert_extracted_bit_field (sub, mode, tmode, unsignedp);
@@ -1769,18 +1797,19 @@ extract_bit_field_1 (rtx str_rtx, unsign
 
   /* If OP0 is a multi-word register, narrow it to the affected word.
      If the region spans two words, defer to extract_split_bit_field.  */
-  if (!MEM_P (op0) && GET_MODE_SIZE (GET_MODE (op0)) > UNITS_PER_WORD)
+  if (!MEM_P (op0) && GET_MODE_SIZE (*op0_mode) > UNITS_PER_WORD)
     {
       if (bitnum % BITS_PER_WORD + bitsize > BITS_PER_WORD)
 	{
 	  if (!fallback_p)
 	    return NULL_RTX;
-	  target = extract_split_bit_field (op0, bitsize, bitnum, unsignedp,
-					    reverse);
+	  target = extract_split_bit_field (op0, op0_mode, bitsize, bitnum,
+					    unsignedp, reverse);
 	  return convert_extracted_bit_field (target, mode, tmode, unsignedp);
 	}
-      op0 = simplify_gen_subreg (word_mode, op0, GET_MODE (op0),
+      op0 = simplify_gen_subreg (word_mode, op0, *op0_mode,
 				 bitnum / BITS_PER_WORD * UNITS_PER_WORD);
+      op0_mode = word_mode;
       bitnum %= BITS_PER_WORD;
     }
 
@@ -1794,10 +1823,10 @@ extract_bit_field_1 (rtx str_rtx, unsign
 	 contains the field, with appropriate checks for endianness
 	 and TRULY_NOOP_TRUNCATION.  */
       && get_best_reg_extraction_insn (&extv, pattern,
-				       GET_MODE_BITSIZE (GET_MODE (op0)),
-				       tmode))
+				       GET_MODE_BITSIZE (*op0_mode), tmode))
     {
-      rtx result = extract_bit_field_using_extv (&extv, op0, bitsize, bitnum,
+      rtx result = extract_bit_field_using_extv (&extv, op0, op0_mode,
+						 bitsize, bitnum,
 						 unsignedp, target, mode,
 						 tmode);
       if (result)
@@ -1811,9 +1840,9 @@ extract_bit_field_1 (rtx str_rtx, unsign
       if (get_best_mem_extraction_insn (&extv, pattern, bitsize, bitnum,
 					tmode))
 	{
-	  rtx result = extract_bit_field_using_extv (&extv, op0, bitsize,
-						     bitnum, unsignedp,
-						     target, mode,
+	  rtx result = extract_bit_field_using_extv (&extv, op0, op0_mode,
+						     bitsize, bitnum,
+						     unsignedp, target, mode,
 						     tmode);
 	  if (result)
 	    return result;
@@ -1849,8 +1878,8 @@ extract_bit_field_1 (rtx str_rtx, unsign
        do a load.  */
     int_mode = *int_mode_for_mode (mode);
 
-  target = extract_fixed_bit_field (int_mode, op0, bitsize, bitnum, target,
-				    unsignedp, reverse);
+  target = extract_fixed_bit_field (int_mode, op0, op0_mode, bitsize,
+				    bitnum, target, unsignedp, reverse);
 
   /* Complex values must be reversed piecewise, so we need to undo the global
      reversal, convert to the complex mode and reverse again.  */
@@ -1929,7 +1958,8 @@ extract_bit_field (rtx str_rtx, unsigned
 }
 
 /* Use shifts and boolean operations to extract a field of BITSIZE bits
-   from bit BITNUM of OP0.
+   from bit BITNUM of OP0.  If OP0_MODE is defined, it is the mode of OP0,
+   otherwise OP0 is a BLKmode MEM.
 
    UNSIGNEDP is nonzero for an unsigned bit field (don't sign-extend value).
    If REVERSE is true, the extraction is to be done in reverse order.
@@ -1940,39 +1970,40 @@ extract_bit_field (rtx str_rtx, unsigned
 
 static rtx
 extract_fixed_bit_field (machine_mode tmode, rtx op0,
+			 opt_scalar_int_mode op0_mode,
 			 unsigned HOST_WIDE_INT bitsize,
 			 unsigned HOST_WIDE_INT bitnum, rtx target,
 			 int unsignedp, bool reverse)
 {
+  scalar_int_mode mode;
   if (MEM_P (op0))
     {
-      scalar_int_mode mode;
       if (!get_best_mode (bitsize, bitnum, 0, 0, MEM_ALIGN (op0),
 			  BITS_PER_WORD, MEM_VOLATILE_P (op0), &mode))
 	/* The only way this should occur is if the field spans word
 	   boundaries.  */
-	return extract_split_bit_field (op0, bitsize, bitnum, unsignedp,
-					reverse);
+	return extract_split_bit_field (op0, op0_mode, bitsize, bitnum,
+					unsignedp, reverse);
 
       op0 = narrow_bit_field_mem (op0, mode, bitsize, bitnum, &bitnum);
     }
+  else
+    mode = *op0_mode;
 
-  return extract_fixed_bit_field_1 (tmode, op0, bitsize, bitnum,
+  return extract_fixed_bit_field_1 (tmode, op0, mode, bitsize, bitnum,
 				    target, unsignedp, reverse);
 }
 
 /* Helper function for extract_fixed_bit_field, extracts
-   the bit field always using the MODE of OP0.  */
+   the bit field always using MODE, which is the mode of OP0.
+   The other arguments are as for extract_fixed_bit_field.  */
 
 static rtx
-extract_fixed_bit_field_1 (machine_mode tmode, rtx op0,
+extract_fixed_bit_field_1 (machine_mode tmode, rtx op0, scalar_int_mode mode,
 			   unsigned HOST_WIDE_INT bitsize,
 			   unsigned HOST_WIDE_INT bitnum, rtx target,
 			   int unsignedp, bool reverse)
 {
-  machine_mode mode = GET_MODE (op0);
-  gcc_assert (SCALAR_INT_MODE_P (mode));
-
   /* Note that bitsize + bitnum can be greater than GET_MODE_BITSIZE (mode)
      for invalid input, such as extract equivalent of f5 from
      gcc.dg/pr48335-2.c.  */
@@ -1999,16 +2030,19 @@ extract_fixed_bit_field_1 (machine_mode
 	    subtarget = 0;
 	  op0 = expand_shift (RSHIFT_EXPR, mode, op0, bitnum, subtarget, 1);
 	}
-      /* Convert the value to the desired mode.  */
-      if (mode != tmode)
-	op0 = convert_to_mode (tmode, op0, 1);
+      /* Convert the value to the desired mode.  TMODE must also be a
+	 scalar integer for this conversion to make sense, since we
+	 shouldn't reinterpret the bits.  */
+      scalar_int_mode new_mode = as_a <scalar_int_mode> (tmode);
+      if (mode != new_mode)
+	op0 = convert_to_mode (new_mode, op0, 1);
 
       /* Unless the msb of the field used to be the msb when we shifted,
 	 mask out the upper bits.  */
 
       if (GET_MODE_BITSIZE (mode) != bitnum + bitsize)
-	return expand_binop (GET_MODE (op0), and_optab, op0,
-			     mask_rtx (GET_MODE (op0), 0, bitsize, 0),
+	return expand_binop (new_mode, and_optab, op0,
+			     mask_rtx (new_mode, 0, bitsize, 0),
 			     target, 1, OPTAB_LIB_WIDEN);
       return op0;
     }
@@ -2058,11 +2092,14 @@ lshift_value (machine_mode mode, unsigne
    OP0 is the REG, SUBREG or MEM rtx for the first of the two words.
    BITSIZE is the field width; BITPOS, position of its first bit, in the word.
    UNSIGNEDP is 1 if should zero-extend the contents; else sign-extend.
+   If OP0_MODE is defined, it is the mode of OP0, otherwise OP0 is
+   a BLKmode MEM.
 
    If REVERSE is true, the extraction is to be done in reverse order.  */
 
 static rtx
-extract_split_bit_field (rtx op0, unsigned HOST_WIDE_INT bitsize,
+extract_split_bit_field (rtx op0, opt_scalar_int_mode op0_mode,
+			 unsigned HOST_WIDE_INT bitsize,
 			 unsigned HOST_WIDE_INT bitpos, int unsignedp,
 			 bool reverse)
 {
@@ -2081,7 +2118,7 @@ extract_split_bit_field (rtx op0, unsign
   while (bitsdone < bitsize)
     {
       unsigned HOST_WIDE_INT thissize;
-      rtx part, word;
+      rtx part;
       unsigned HOST_WIDE_INT thispos;
       unsigned HOST_WIDE_INT offset;
 
@@ -2095,19 +2132,21 @@ extract_split_bit_field (rtx op0, unsign
       thissize = MIN (thissize, unit - thispos);
 
       /* If OP0 is a register, then handle OFFSET here.  */
+      rtx op0_piece = op0;
+      opt_scalar_int_mode op0_piece_mode = op0_mode;
       if (SUBREG_P (op0) || REG_P (op0))
 	{
-	  word = operand_subword_force (op0, offset, GET_MODE (op0));
+	  op0_piece = operand_subword_force (op0, offset, *op0_mode);
+	  op0_piece_mode = word_mode;
 	  offset = 0;
 	}
-      else
-	word = op0;
 
       /* Extract the parts in bit-counting order,
 	 whose meaning is determined by BYTES_PER_UNIT.
 	 OFFSET is in UNITs, and UNIT is in bits.  */
-      part = extract_fixed_bit_field (word_mode, word, thissize,
-				      offset * unit + thispos, 0, 1, reverse);
+      part = extract_fixed_bit_field (word_mode, op0_piece, op0_piece_mode,
+				      thissize, offset * unit + thispos,
+				      0, 1, reverse);
       bitsdone += thissize;
 
       /* Shift this part into place for the result.  */


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]