[PATCH, applied] Backport PowerPC ISA 3.0 splat changes to GCC 6.2

[Michael Meissner <meissner at linux dot vnet dot ibm dot com>]

I have applied the following patches for ISA 3.0 (power9) that were installed
on the trunk in May to the GCC 6.2 branch after doing a bootstrap and
regression testing.  This patch combines the original patch, and the two
followup patches that fixed some bugs.  It does remove the all_ones_predicate
that had also been used by the ISA 3.0 min/max patch, and it was installed when
that patch was back ported.

[gcc]
2016-06-09  Michael Meissner  <meissner@linux.vnet.ibm.com>

	Back port from trunk
	2016-05-31  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* config/rs6000/vsx.md (vsx_splat_<mode>, V2DI/V2DF): Simplify
	alternatives, eliminating preferred register class.  Add support
	for the MTVSRDD instruction in ISA 3.0.
	(vsx_splat_v4si_internal): Use splat_input_operand instead of
	reg_or_indexed_operand.
	(vsx_splat_v4sf_internal): Likewise.

	Back port from trunk
	2016-05-31  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/71186
	* config/rs6000/vsx.md (xxspltib_<mode>_nosplit): Add alternatives
	for loading up all 0's or all 1's.

	Back port from trunk
	2016-05-18  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/70915
	* config/rs6000/constraints.md (wE constraint): New constraint
	for a vector constant that can be loaded with XXSPLTIB.
	(wM constraint): New constraint for a vector constant of a 1's.
	(wS constraint): New constraint for a vector constant that can be
	loaded with XXSPLTIB and a vector sign extend instruction.
	* config/rs6000/predicates.md (xxspltib_constant_split): New
	predicates for wE/wS constraints.
	(xxspltib_constant_nosplit): Likewise.
	(easy_vector_constant): Add support for constants that can be
	loaded via XXSPLTIB.
	(splat_input_operand): Add support for ISA 3.0 word splat operations.
	* config/rs6000/rs6000.c (xxspltib_constant_p): New function to
	return if a constant can be loaded with the ISA 3.0 XXSPLTIB
	instruction and possibly with a sign extension.
	(output_vec_const_move): Add support for XXSPLTIB. If we are
	loading up 0/-1 into Altivec registers, prefer using VSPLTISW
	instead of XXLXOR/XXLORC.
	(rs6000_expand_vector_init): Add support for ISA 3.0 word splat
	operations.
	(rs6000_legitimize_reload_address): Likewise.
	(rs6000_output_move_128bit): Use output_vec_const_move to emit
	constants.
	* config/rs6000/vsx.md (VSX_M): Add TImode (if -mvsx-timode) and
	combine VSX_M and VSX_M2 into one iterator.
	(VSX_M2): Likewise.
	(VSINT_84): New iterators for loading constants with XXSPLTIB.
	(VSINT_842): Likewise.
	(UNSPEC_VSX_SIGN_EXTEND): New UNSPEC.
	(xxspltib_v16qi): New insns to load up constants with the ISA 3.0
	XXSPLTIB instruction.
	(xxspltib_<mode>_nosplit): Likewise.
	(xxspltib_<mode>_split): New insn to load up constants with
	XXSPLTIB and a sign extend instruction.
	(vsx_mov<mode>): Replace single move that handled all vector types
	with separate 32-bit and 64-bit moves.  Combine the movti_<bit>
	moves (when -mvsx-timode is in effect) into the main vector
	moves.  Eliminate separate moves for <VSr> <VSa>, where the
	preferred register class (<VSr>) is listed first, and the
	secondary register class (<VSa>) is listed second with a '?' to
	discourage use.  Prefer loading 0/-1 in any VSX register for ISA
	3.0, and Altivec registers for ISA 2.06/2.07 (PR target/70915) so
	that if the register was involved in a slow operation, the
	clear/set operation does not wait for the slow operation to
	finish.  Adjust the length attributes for 32-bit mode.  Use
	rs6000_output_move_128bit and drop the use of the string
	instructions for 32-bit movti when -mvsx-timode is in effect.  Use
	spacing so that the alternatives and attributes don't generate
	long lines, and put things in columns, so that it is easier to
	match up the operands and attributes with the insn alternatives.
	(vsx_mov<mode>_64bit): Likewise.
	(vsx_mov<mode>_32bit): Likewise.
	(vsx_movti_64bit): Fold movti into normal vector moves.
	(vsx_movti_32bit): Likewise.
	(vsx_splat_<mode>, V4SI/V4SF modes): Add support for ISA 3.0 word
	splat instructions.
	(vsx_splat_v4si_internal): Likewise.
	(vsx_splat_v4sf_internal): Likewise.
	(vector fusion peepholes): Use VSX_M instead of VSX_M2.
	(vsx_sign_extend_qi_<mode>): New ISA 3.0 instructions to sign
	extend vector elements.
	(vsx_sign_extend_hi_<mode>): Likewise.
	(vsx_sign_extend_si_v2di): Likewise.
	* config/rs6000/rs6000-protos.h (xxspltib_constant_p): Add
	declaration.
	* doc/md.texi (PowerPC constraints): Document the wE, wM, and wS
	constraints.  Add trailing period to wL documentation.

[gcc/testsuite]
2016-06-09  Michael Meissner  <meissner@linux.vnet.ibm.com>

	Back port from trunk
	2016-05-31  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* gcc.target/powerpc/p9-splat-4.c: New test.

	Back port from trunk
	2016-05-31  Michael Meissner  <meissner@linux.vnet.ibm.com>

	PR target/71186
	* gcc.target/powerpc/pr71186.c: New test.

	Back port from trunk
	2016-05-18  Michael Meissner  <meissner@linux.vnet.ibm.com>

	* gcc.target/powerpc/p9-splat-1.c: New tests for ISA 3.0 word
	splat operations and the XXSPLTIB instruction.
	* gcc.target/powerpc/p9-splat-2.c: Likewise.
	* gcc.target/powerpc/p9-splat-3.c: Likewise.
	* gcc.target/powerpc/pr47755.c: Allow vspltisw in addition to
	xxlxor to clear a register.


-- 
Michael Meissner, IBM
IBM, M/S 2506R, 550 King Street, Littleton, MA 01460-6245, USA
email: meissner@linux.vnet.ibm.com, phone: +1 (978) 899-4797

Attachment: gcc-stage6.splat004b
Description: Text document