This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
Re: [PATCH, rs6000] Expand vec_ld and vec_st during parsing to improve performance
- From: Bill Schmidt <wschmidt at linux dot vnet dot ibm dot com>
- To: Richard Biener <richard dot guenther at gmail dot com>
- Cc: GCC Patches <gcc-patches at gcc dot gnu dot org>, David Edelsohn <dje dot gcc at gmail dot com>
- Date: Tue, 19 Apr 2016 15:27:23 -0500
- Subject: Re: [PATCH, rs6000] Expand vec_ld and vec_st during parsing to improve performance
- Authentication-results: sourceware.org; auth=none
- References: <1461017157 dot 18355 dot 108 dot camel at oc8801110288 dot ibm dot com> <CAFiYyc3M0mdwtK+x1XCzmn3mkWG2MHWUGT2n92pSAyEgRMSEmw at mail dot gmail dot com>
On Tue, 2016-04-19 at 10:09 +0200, Richard Biener wrote:
> On Tue, Apr 19, 2016 at 12:05 AM, Bill Schmidt
> <wschmidt@linux.vnet.ibm.com> wrote:
> > Hi,
> >
> > Expanding built-ins in the usual way (leaving them as calls until
> > expanding into RTL) restricts the amount of optimization that can be
> > performed on the code represented by the built-ins. This has been
> > observed to be particularly bad for the vec_ld and vec_st built-ins on
> > PowerPC, which represent the lvx and stvx instructions. Currently these
> > are expanded into UNSPECs that are left untouched by the optimizers, so
> > no redundant load or store elimination can take place. For certain
> > idiomatic usages, this leads to very bad performance.
> >
> > Initially I planned to just change the UNSPEC representation to RTL that
> > directly expresses the address masking implicit in lvx and stvx. This
> > turns out to be only partially successful in improving performance.
> > Among other things, by the time we reach RTL we have lost track of the
> > __restrict__ attribute, leading to more appearances of may-alias
> > relationships than should really be present. Instead, this patch
> > expands the built-ins during parsing so that they are exposed to all
> > GIMPLE optimizations as well.
> >
> > This works well for vec_ld and vec_st. It is also possible for
> > programmers to instead use __builtin_altivec_lvx_<mode> and
> > __builtin_altivec_stvx_<mode>. These are not so easy to catch during
> > parsing, since they are not processed by the overloaded built-in
> > function table. For these, I am currently falling back to expansion
> > during RTL while still exposing the address-masking semantics, which
> > seems ok for these somewhat obscure built-ins. At some future time we
> > may decide to handle them similarly to vec_ld and vec_st.
> >
> > For POWER8 little-endian only, the loads and stores during expand time
> > require some special handling, since the POWER8 expanders want to
> > convert these to lxvd2x/xxswapd and xxswapd/stxvd2x. To deal with this,
> > I've added an extra pre-pass to the swap optimization phase that
> > recognizes the lvx and stvx patterns and canonicalizes them so they'll
> > be properly recognized. This isn't an issue for earlier or later
> > processors, or for big-endian POWER8, so doing this as part of swap
> > optimization is appropriate.
> >
> > We have a lot of existing test cases for this code, which proved very
> > useful in discovering bugs, so I haven't seen a reason to add any new
> > tests.
> >
> > The patch is fairly large, but it isn't feasible to break it up into
> > smaller units without leaving something in a broken state. So I will
> > have to just apologize for the size and leave it at that. Sorry! :)
> >
> > Bootstrapped and tested successfully on powerpc64le-unknown-linux-gnu,
> > and on powerpc64-unknown-linux-gnu (-m32 and -m64) with no regressions.
> > Is this ok for trunk after GCC 6 releases?
>
> Just took a very quick look but it seems you are using integer arithmetic
> for the pointer adjustment and bit-and. You could use POINTER_PLUS_EXPR
> for the addition and BIT_AND_EXPR is also valid on pointer types. Which
> means you don't need conversions to/from sizetype.
I just verified that I run into trouble with both these changes. The
build_binary_op interface doesn't accept POINTER_PLUS_EXPR as a valid
code (we hit a gcc_unreachable in the main switch statement), but does
produce pointer additions from a PLUS_EXPR. Also, apparently
BIT_AND_EXPR is not valid on at least these pointer types:
ld.c: In function 'test':
ld.c:68:9: error: invalid operands to binary & (have '__vector(16) unsigned char *' and '__vector(16) unsigned char *')
vuc = vec_ld (0, (vector unsigned char *)svuc);
^
That's what happens if I try:
tree aligned = build_binary_op (loc, BIT_AND_EXPR, addr,
build_int_cst (TREE_TYPE (arg1),
-16), 0);
If I try with building the -16 as a sizetype, I get the same error
message except that the second argument listed is 'sizetype'. Is there
something else I should be trying instead?
Thanks,
Bill
>
> x86 nowadays has intrinsics implemented as inlines - they come from
> header files. It seems for ppc the intrinsics are somehow magically
> there, w/o a header file?
>
> Richard.
>
> > Thanks,
> > Bill
> >
> >
> > 2016-04-18 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
> >
> > * config/rs6000/altivec.md (altivec_lvx_<mode>): Remove.
> > (altivec_lvx_<mode>_internal): Document.
> > (altivec_lvx_<mode>_2op): New define_insn.
> > (altivec_lvx_<mode>_1op): Likewise.
> > (altivec_lvx_<mode>_2op_si): Likewise.
> > (altivec_lvx_<mode>_1op_si): Likewise.
> > (altivec_stvx_<mode>): Remove.
> > (altivec_stvx_<mode>_internal): Document.
> > (altivec_stvx_<mode>_2op): New define_insn.
> > (altivec_stvx_<mode>_1op): Likewise.
> > (altivec_stvx_<mode>_2op_si): Likewise.
> > (altivec_stvx_<mode>_1op_si): Likewise.
> > * config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin):
> > Expand vec_ld and vec_st during parsing.
> > * config/rs6000/rs6000.c (altivec_expand_lvx_be): Commentary
> > changes.
> > (altivec_expand_stvx_be): Likewise.
> > (altivec_expand_lv_builtin): Expand lvx built-ins to expose the
> > address-masking behavior in RTL.
> > (altivec_expand_stv_builtin): Expand stvx built-ins to expose the
> > address-masking behavior in RTL.
> > (altivec_expand_builtin): Change builtin code arguments for calls
> > to altivec_expand_stv_builtin and altivec_expand_lv_builtin.
> > (insn_is_swappable_p): Avoid incorrect swap optimization in the
> > presence of lvx/stvx patterns.
> > (alignment_with_canonical_addr): New function.
> > (alignment_mask): Likewise.
> > (find_alignment_op): Likewise.
> > (combine_lvx_pattern): Likewise.
> > (combine_stvx_pattern): Likewise.
> > (combine_lvx_stvx_patterns): Likewise.
> > (rs6000_analyze_swaps): Perform a pre-pass to recognize lvx and
> > stvx patterns from expand.
> > * config/rs6000/vector.md (vector_altivec_load_<mode>): Use new
> > expansions.
> > (vector_altivec_store_<mode>): Likewise.
> >
> >
> > Index: gcc/config/rs6000/altivec.md
> > ===================================================================
> > --- gcc/config/rs6000/altivec.md (revision 235090)
> > +++ gcc/config/rs6000/altivec.md (working copy)
> > @@ -2514,20 +2514,9 @@
> > "lvxl %0,%y1"
> > [(set_attr "type" "vecload")])
> >
> > -(define_expand "altivec_lvx_<mode>"
> > - [(parallel
> > - [(set (match_operand:VM2 0 "register_operand" "=v")
> > - (match_operand:VM2 1 "memory_operand" "Z"))
> > - (unspec [(const_int 0)] UNSPEC_LVX)])]
> > - "TARGET_ALTIVEC"
> > -{
> > - if (!BYTES_BIG_ENDIAN && VECTOR_ELT_ORDER_BIG)
> > - {
> > - altivec_expand_lvx_be (operands[0], operands[1], <MODE>mode, UNSPEC_LVX);
> > - DONE;
> > - }
> > -})
> > -
> > +; This version of lvx is used only in cases where we need to force an lvx
> > +; over any other load, and we don't care about losing CSE opportunities.
> > +; Its primary use is for prologue register saves.
> > (define_insn "altivec_lvx_<mode>_internal"
> > [(parallel
> > [(set (match_operand:VM2 0 "register_operand" "=v")
> > @@ -2537,20 +2526,45 @@
> > "lvx %0,%y1"
> > [(set_attr "type" "vecload")])
> >
> > -(define_expand "altivec_stvx_<mode>"
> > - [(parallel
> > - [(set (match_operand:VM2 0 "memory_operand" "=Z")
> > - (match_operand:VM2 1 "register_operand" "v"))
> > - (unspec [(const_int 0)] UNSPEC_STVX)])]
> > - "TARGET_ALTIVEC"
> > -{
> > - if (!BYTES_BIG_ENDIAN && VECTOR_ELT_ORDER_BIG)
> > - {
> > - altivec_expand_stvx_be (operands[0], operands[1], <MODE>mode, UNSPEC_STVX);
> > - DONE;
> > - }
> > -})
> > +; The next two patterns embody what lvx should usually look like.
> > +(define_insn "altivec_lvx_<mode>_2op"
> > + [(set (match_operand:VM2 0 "register_operand" "=v")
> > + (mem:VM2 (and:DI (plus:DI (match_operand:DI 1 "register_operand" "b")
> > + (match_operand:DI 2 "register_operand" "r"))
> > + (const_int -16))))]
> > + "TARGET_ALTIVEC && TARGET_64BIT"
> > + "lvx %0,%1,%2"
> > + [(set_attr "type" "vecload")])
> >
> > +(define_insn "altivec_lvx_<mode>_1op"
> > + [(set (match_operand:VM2 0 "register_operand" "=v")
> > + (mem:VM2 (and:DI (match_operand:DI 1 "register_operand" "r")
> > + (const_int -16))))]
> > + "TARGET_ALTIVEC && TARGET_64BIT"
> > + "lvx %0,0,%1"
> > + [(set_attr "type" "vecload")])
> > +
> > +; 32-bit versions of the above.
> > +(define_insn "altivec_lvx_<mode>_2op_si"
> > + [(set (match_operand:VM2 0 "register_operand" "=v")
> > + (mem:VM2 (and:SI (plus:SI (match_operand:SI 1 "register_operand" "b")
> > + (match_operand:SI 2 "register_operand" "r"))
> > + (const_int -16))))]
> > + "TARGET_ALTIVEC && TARGET_32BIT"
> > + "lvx %0,%1,%2"
> > + [(set_attr "type" "vecload")])
> > +
> > +(define_insn "altivec_lvx_<mode>_1op_si"
> > + [(set (match_operand:VM2 0 "register_operand" "=v")
> > + (mem:VM2 (and:SI (match_operand:SI 1 "register_operand" "r")
> > + (const_int -16))))]
> > + "TARGET_ALTIVEC && TARGET_32BIT"
> > + "lvx %0,0,%1"
> > + [(set_attr "type" "vecload")])
> > +
> > +; This version of stvx is used only in cases where we need to force an stvx
> > +; over any other store, and we don't care about losing CSE opportunities.
> > +; Its primary use is for epilogue register restores.
> > (define_insn "altivec_stvx_<mode>_internal"
> > [(parallel
> > [(set (match_operand:VM2 0 "memory_operand" "=Z")
> > @@ -2560,6 +2574,42 @@
> > "stvx %1,%y0"
> > [(set_attr "type" "vecstore")])
> >
> > +; The next two patterns embody what stvx should usually look like.
> > +(define_insn "altivec_stvx_<mode>_2op"
> > + [(set (mem:VM2 (and:DI (plus:DI (match_operand:DI 1 "register_operand" "b")
> > + (match_operand:DI 2 "register_operand" "r"))
> > + (const_int -16)))
> > + (match_operand:VM2 0 "register_operand" "v"))]
> > + "TARGET_ALTIVEC && TARGET_64BIT"
> > + "stvx %0,%1,%2"
> > + [(set_attr "type" "vecstore")])
> > +
> > +(define_insn "altivec_stvx_<mode>_1op"
> > + [(set (mem:VM2 (and:DI (match_operand:DI 1 "register_operand" "r")
> > + (const_int -16)))
> > + (match_operand:VM2 0 "register_operand" "v"))]
> > + "TARGET_ALTIVEC && TARGET_64BIT"
> > + "stvx %0,0,%1"
> > + [(set_attr "type" "vecstore")])
> > +
> > +; 32-bit versions of the above.
> > +(define_insn "altivec_stvx_<mode>_2op_si"
> > + [(set (mem:VM2 (and:SI (plus:SI (match_operand:SI 1 "register_operand" "b")
> > + (match_operand:SI 2 "register_operand" "r"))
> > + (const_int -16)))
> > + (match_operand:VM2 0 "register_operand" "v"))]
> > + "TARGET_ALTIVEC && TARGET_32BIT"
> > + "stvx %0,%1,%2"
> > + [(set_attr "type" "vecstore")])
> > +
> > +(define_insn "altivec_stvx_<mode>_1op_si"
> > + [(set (mem:VM2 (and:SI (match_operand:SI 1 "register_operand" "r")
> > + (const_int -16)))
> > + (match_operand:VM2 0 "register_operand" "v"))]
> > + "TARGET_ALTIVEC && TARGET_32BIT"
> > + "stvx %0,0,%1"
> > + [(set_attr "type" "vecstore")])
> > +
> > (define_expand "altivec_stvxl_<mode>"
> > [(parallel
> > [(set (match_operand:VM2 0 "memory_operand" "=Z")
> > Index: gcc/config/rs6000/rs6000-c.c
> > ===================================================================
> > --- gcc/config/rs6000/rs6000-c.c (revision 235090)
> > +++ gcc/config/rs6000/rs6000-c.c (working copy)
> > @@ -4800,6 +4800,164 @@ assignment for unaligned loads and stores");
> > return stmt;
> > }
> >
> > + /* Expand vec_ld into an expression that masks the address and
> > + performs the load. We need to expand this early to allow
> > + the best aliasing, as by the time we get into RTL we no longer
> > + are able to honor __restrict__, for example. We may want to
> > + consider this for all memory access built-ins.
> > +
> > + When -maltivec=be is specified, simply punt to existing
> > + built-in processing. */
> > + if (fcode == ALTIVEC_BUILTIN_VEC_LD
> > + && (BYTES_BIG_ENDIAN || !VECTOR_ELT_ORDER_BIG))
> > + {
> > + tree arg0 = (*arglist)[0];
> > + tree arg1 = (*arglist)[1];
> > +
> > + /* Strip qualifiers like "const" from the pointer arg. */
> > + tree arg1_type = TREE_TYPE (arg1);
> > + tree inner_type = TREE_TYPE (arg1_type);
> > + if (TYPE_QUALS (TREE_TYPE (arg1_type)) != 0)
> > + {
> > + arg1_type = build_pointer_type (build_qualified_type (inner_type,
> > + 0));
> > + arg1 = fold_convert (arg1_type, arg1);
> > + }
> > +
> > + /* Construct the masked address. We have to jump through some hoops
> > + here. If the first argument to a PLUS_EXPR is a pointer,
> > + build_binary_op will multiply the offset by the size of the
> > + inner type of the pointer (C semantics). With vec_ld and vec_st,
> > + the offset must be left alone. However, if we convert to a
> > + sizetype to do the arithmetic, we get a PLUS_EXPR instead of a
> > + POINTER_PLUS_EXPR, which interferes with aliasing (causing us,
> > + for example, to lose "restrict" information). Thus where legal,
> > + we pre-adjust the offset knowing that a multiply by size is
> > + coming. When the offset isn't a multiple of the size, we are
> > + forced to do the arithmetic in size_type for correctness, at the
> > + cost of losing aliasing information. This, however, should be
> > + quite rare with these operations. */
> > + arg0 = fold (arg0);
> > +
> > + /* Let existing error handling take over if we don't have a constant
> > + offset. */
> > + if (TREE_CODE (arg0) == INTEGER_CST)
> > + {
> > + HOST_WIDE_INT off = TREE_INT_CST_LOW (arg0);
> > + HOST_WIDE_INT size = int_size_in_bytes (inner_type);
> > + tree addr;
> > +
> > + if (off % size == 0)
> > + {
> > + tree adjoff = build_int_cst (TREE_TYPE (arg0), off / size);
> > + addr = build_binary_op (loc, PLUS_EXPR, arg1, adjoff, 0);
> > + addr = build1 (NOP_EXPR, sizetype, addr);
> > + }
> > + else
> > + {
> > + tree hack_arg1 = build1 (NOP_EXPR, sizetype, arg1);
> > + addr = build_binary_op (loc, PLUS_EXPR, hack_arg1, arg0, 0);
> > + }
> > + tree aligned = build_binary_op (loc, BIT_AND_EXPR, addr,
> > + build_int_cst (sizetype, -16), 0);
> > +
> > + /* Find the built-in to get the return type so we can convert
> > + the result properly (or fall back to default handling if the
> > + arguments aren't compatible). */
> > + for (desc = altivec_overloaded_builtins;
> > + desc->code && desc->code != fcode; desc++)
> > + continue;
> > +
> > + for (; desc->code == fcode; desc++)
> > + if (rs6000_builtin_type_compatible (TREE_TYPE (arg0), desc->op1)
> > + && (rs6000_builtin_type_compatible (TREE_TYPE (arg1),
> > + desc->op2)))
> > + {
> > + tree ret_type = rs6000_builtin_type (desc->ret_type);
> > + if (TYPE_MODE (ret_type) == V2DImode)
> > + /* Type-based aliasing analysis thinks vector long
> > + and vector long long are different and will put them
> > + in distinct alias classes. Force our return type
> > + to be a may-alias type to avoid this. */
> > + ret_type
> > + = build_pointer_type_for_mode (ret_type, Pmode,
> > + true/*can_alias_all*/);
> > + else
> > + ret_type = build_pointer_type (ret_type);
> > + aligned = build1 (NOP_EXPR, ret_type, aligned);
> > + tree ret_val = build_indirect_ref (loc, aligned, RO_NULL);
> > + return ret_val;
> > + }
> > + }
> > + }
> > +
> > + /* Similarly for stvx. */
> > + if (fcode == ALTIVEC_BUILTIN_VEC_ST
> > + && (BYTES_BIG_ENDIAN || !VECTOR_ELT_ORDER_BIG))
> > + {
> > + tree arg0 = (*arglist)[0];
> > + tree arg1 = (*arglist)[1];
> > + tree arg2 = (*arglist)[2];
> > +
> > + /* Construct the masked address. See handling for ALTIVEC_BUILTIN_VEC_LD
> > + for an explanation of address arithmetic concerns. */
> > + arg1 = fold (arg1);
> > +
> > + /* Let existing error handling take over if we don't have a constant
> > + offset. */
> > + if (TREE_CODE (arg1) == INTEGER_CST)
> > + {
> > + HOST_WIDE_INT off = TREE_INT_CST_LOW (arg1);
> > + tree inner_type = TREE_TYPE (TREE_TYPE (arg2));
> > + HOST_WIDE_INT size = int_size_in_bytes (inner_type);
> > + tree addr;
> > +
> > + if (off % size == 0)
> > + {
> > + tree adjoff = build_int_cst (TREE_TYPE (arg1), off / size);
> > + addr = build_binary_op (loc, PLUS_EXPR, arg2, adjoff, 0);
> > + addr = build1 (NOP_EXPR, sizetype, addr);
> > + }
> > + else
> > + {
> > + tree hack_arg2 = build1 (NOP_EXPR, sizetype, arg2);
> > + addr = build_binary_op (loc, PLUS_EXPR, hack_arg2, arg1, 0);
> > + }
> > + tree aligned = build_binary_op (loc, BIT_AND_EXPR, addr,
> > + build_int_cst (sizetype, -16), 0);
> > +
> > + /* Find the built-in to make sure a compatible one exists; if not
> > + we fall back to default handling to get the error message. */
> > + for (desc = altivec_overloaded_builtins;
> > + desc->code && desc->code != fcode; desc++)
> > + continue;
> > +
> > + for (; desc->code == fcode; desc++)
> > + if (rs6000_builtin_type_compatible (TREE_TYPE (arg0), desc->op1)
> > + && rs6000_builtin_type_compatible (TREE_TYPE (arg1), desc->op2)
> > + && rs6000_builtin_type_compatible (TREE_TYPE (arg2),
> > + desc->op3))
> > + {
> > + tree arg0_type = TREE_TYPE (arg0);
> > + if (TYPE_MODE (arg0_type) == V2DImode)
> > + /* Type-based aliasing analysis thinks vector long
> > + and vector long long are different and will put them
> > + in distinct alias classes. Force our address type
> > + to be a may-alias type to avoid this. */
> > + arg0_type
> > + = build_pointer_type_for_mode (arg0_type, Pmode,
> > + true/*can_alias_all*/);
> > + else
> > + arg0_type = build_pointer_type (arg0_type);
> > + aligned = build1 (NOP_EXPR, arg0_type, aligned);
> > + tree stg = build_indirect_ref (loc, aligned, RO_NULL);
> > + tree retval = build2 (MODIFY_EXPR, TREE_TYPE (stg), stg,
> > + convert (TREE_TYPE (stg), arg0));
> > + return retval;
> > + }
> > + }
> > + }
> > +
> > for (n = 0;
> > !VOID_TYPE_P (TREE_VALUE (fnargs)) && n < nargs;
> > fnargs = TREE_CHAIN (fnargs), n++)
> > Index: gcc/config/rs6000/rs6000.c
> > ===================================================================
> > --- gcc/config/rs6000/rs6000.c (revision 235090)
> > +++ gcc/config/rs6000/rs6000.c (working copy)
> > @@ -13025,9 +13025,9 @@ swap_selector_for_mode (machine_mode mode)
> > return force_reg (V16QImode, gen_rtx_CONST_VECTOR (V16QImode, gen_rtvec_v (16, perm)));
> > }
> >
> > -/* Generate code for an "lvx", "lvxl", or "lve*x" built-in for a little endian target
> > - with -maltivec=be specified. Issue the load followed by an element-reversing
> > - permute. */
> > +/* Generate code for an "lvxl", or "lve*x" built-in for a little endian target
> > + with -maltivec=be specified. Issue the load followed by an element-
> > + reversing permute. */
> > void
> > altivec_expand_lvx_be (rtx op0, rtx op1, machine_mode mode, unsigned unspec)
> > {
> > @@ -13043,8 +13043,8 @@ altivec_expand_lvx_be (rtx op0, rtx op1, machine_m
> > emit_insn (gen_rtx_SET (op0, vperm));
> > }
> >
> > -/* Generate code for a "stvx" or "stvxl" built-in for a little endian target
> > - with -maltivec=be specified. Issue the store preceded by an element-reversing
> > +/* Generate code for a "stvxl" built-in for a little endian target with
> > + -maltivec=be specified. Issue the store preceded by an element-reversing
> > permute. */
> > void
> > altivec_expand_stvx_be (rtx op0, rtx op1, machine_mode mode, unsigned unspec)
> > @@ -13106,22 +13106,65 @@ altivec_expand_lv_builtin (enum insn_code icode, t
> >
> > op1 = copy_to_mode_reg (mode1, op1);
> >
> > - if (op0 == const0_rtx)
> > + /* For LVX, express the RTL accurately by ANDing the address with -16.
> > + LVXL and LVE*X expand to use UNSPECs to hide their special behavior,
> > + so the raw address is fine. */
> > + switch (icode)
> > {
> > - addr = gen_rtx_MEM (blk ? BLKmode : tmode, op1);
> > - }
> > - else
> > - {
> > - op0 = copy_to_mode_reg (mode0, op0);
> > - addr = gen_rtx_MEM (blk ? BLKmode : tmode, gen_rtx_PLUS (Pmode, op0, op1));
> > - }
> > + case CODE_FOR_altivec_lvx_v2df_2op:
> > + case CODE_FOR_altivec_lvx_v2di_2op:
> > + case CODE_FOR_altivec_lvx_v4sf_2op:
> > + case CODE_FOR_altivec_lvx_v4si_2op:
> > + case CODE_FOR_altivec_lvx_v8hi_2op:
> > + case CODE_FOR_altivec_lvx_v16qi_2op:
> > + {
> > + rtx rawaddr;
> > + if (op0 == const0_rtx)
> > + rawaddr = op1;
> > + else
> > + {
> > + op0 = copy_to_mode_reg (mode0, op0);
> > + rawaddr = gen_rtx_PLUS (Pmode, op1, op0);
> > + }
> > + addr = gen_rtx_AND (Pmode, rawaddr, gen_rtx_CONST_INT (Pmode, -16));
> > + addr = gen_rtx_MEM (blk ? BLKmode : tmode, addr);
> >
> > - pat = GEN_FCN (icode) (target, addr);
> > + /* For -maltivec=be, emit the load and follow it up with a
> > + permute to swap the elements. */
> > + if (!BYTES_BIG_ENDIAN && VECTOR_ELT_ORDER_BIG)
> > + {
> > + rtx temp = gen_reg_rtx (tmode);
> > + emit_insn (gen_rtx_SET (temp, addr));
> >
> > - if (! pat)
> > - return 0;
> > - emit_insn (pat);
> > + rtx sel = swap_selector_for_mode (tmode);
> > + rtx vperm = gen_rtx_UNSPEC (tmode, gen_rtvec (3, temp, temp, sel),
> > + UNSPEC_VPERM);
> > + emit_insn (gen_rtx_SET (target, vperm));
> > + }
> > + else
> > + emit_insn (gen_rtx_SET (target, addr));
> >
> > + break;
> > + }
> > +
> > + default:
> > + if (op0 == const0_rtx)
> > + addr = gen_rtx_MEM (blk ? BLKmode : tmode, op1);
> > + else
> > + {
> > + op0 = copy_to_mode_reg (mode0, op0);
> > + addr = gen_rtx_MEM (blk ? BLKmode : tmode,
> > + gen_rtx_PLUS (Pmode, op1, op0));
> > + }
> > +
> > + pat = GEN_FCN (icode) (target, addr);
> > + if (! pat)
> > + return 0;
> > + emit_insn (pat);
> > +
> > + break;
> > + }
> > +
> > return target;
> > }
> >
> > @@ -13208,7 +13251,7 @@ altivec_expand_stv_builtin (enum insn_code icode,
> > rtx op0 = expand_normal (arg0);
> > rtx op1 = expand_normal (arg1);
> > rtx op2 = expand_normal (arg2);
> > - rtx pat, addr;
> > + rtx pat, addr, rawaddr;
> > machine_mode tmode = insn_data[icode].operand[0].mode;
> > machine_mode smode = insn_data[icode].operand[1].mode;
> > machine_mode mode1 = Pmode;
> > @@ -13220,24 +13263,69 @@ altivec_expand_stv_builtin (enum insn_code icode,
> > || arg2 == error_mark_node)
> > return const0_rtx;
> >
> > - if (! (*insn_data[icode].operand[1].predicate) (op0, smode))
> > - op0 = copy_to_mode_reg (smode, op0);
> > -
> > op2 = copy_to_mode_reg (mode2, op2);
> >
> > - if (op1 == const0_rtx)
> > + /* For STVX, express the RTL accurately by ANDing the address with -16.
> > + STVXL and STVE*X expand to use UNSPECs to hide their special behavior,
> > + so the raw address is fine. */
> > + switch (icode)
> > {
> > - addr = gen_rtx_MEM (tmode, op2);
> > - }
> > - else
> > - {
> > - op1 = copy_to_mode_reg (mode1, op1);
> > - addr = gen_rtx_MEM (tmode, gen_rtx_PLUS (Pmode, op1, op2));
> > - }
> > + case CODE_FOR_altivec_stvx_v2df_2op:
> > + case CODE_FOR_altivec_stvx_v2di_2op:
> > + case CODE_FOR_altivec_stvx_v4sf_2op:
> > + case CODE_FOR_altivec_stvx_v4si_2op:
> > + case CODE_FOR_altivec_stvx_v8hi_2op:
> > + case CODE_FOR_altivec_stvx_v16qi_2op:
> > + {
> > + if (op1 == const0_rtx)
> > + rawaddr = op2;
> > + else
> > + {
> > + op1 = copy_to_mode_reg (mode1, op1);
> > + rawaddr = gen_rtx_PLUS (Pmode, op2, op1);
> > + }
> >
> > - pat = GEN_FCN (icode) (addr, op0);
> > - if (pat)
> > - emit_insn (pat);
> > + addr = gen_rtx_AND (Pmode, rawaddr, gen_rtx_CONST_INT (Pmode, -16));
> > + addr = gen_rtx_MEM (tmode, addr);
> > +
> > + op0 = copy_to_mode_reg (tmode, op0);
> > +
> > + /* For -maltivec=be, emit a permute to swap the elements, followed
> > + by the store. */
> > + if (!BYTES_BIG_ENDIAN && VECTOR_ELT_ORDER_BIG)
> > + {
> > + rtx temp = gen_reg_rtx (tmode);
> > + rtx sel = swap_selector_for_mode (tmode);
> > + rtx vperm = gen_rtx_UNSPEC (tmode, gen_rtvec (3, op0, op0, sel),
> > + UNSPEC_VPERM);
> > + emit_insn (gen_rtx_SET (temp, vperm));
> > + emit_insn (gen_rtx_SET (addr, temp));
> > + }
> > + else
> > + emit_insn (gen_rtx_SET (addr, op0));
> > +
> > + break;
> > + }
> > +
> > + default:
> > + {
> > + if (! (*insn_data[icode].operand[1].predicate) (op0, smode))
> > + op0 = copy_to_mode_reg (smode, op0);
> > +
> > + if (op1 == const0_rtx)
> > + addr = gen_rtx_MEM (tmode, op2);
> > + else
> > + {
> > + op1 = copy_to_mode_reg (mode1, op1);
> > + addr = gen_rtx_MEM (tmode, gen_rtx_PLUS (Pmode, op2, op1));
> > + }
> > +
> > + pat = GEN_FCN (icode) (addr, op0);
> > + if (pat)
> > + emit_insn (pat);
> > + }
> > + }
> > +
> > return NULL_RTX;
> > }
> >
> > @@ -14073,18 +14161,18 @@ altivec_expand_builtin (tree exp, rtx target, bool
> > switch (fcode)
> > {
> > case ALTIVEC_BUILTIN_STVX_V2DF:
> > - return altivec_expand_stv_builtin (CODE_FOR_altivec_stvx_v2df, exp);
> > + return altivec_expand_stv_builtin (CODE_FOR_altivec_stvx_v2df_2op, exp);
> > case ALTIVEC_BUILTIN_STVX_V2DI:
> > - return altivec_expand_stv_builtin (CODE_FOR_altivec_stvx_v2di, exp);
> > + return altivec_expand_stv_builtin (CODE_FOR_altivec_stvx_v2di_2op, exp);
> > case ALTIVEC_BUILTIN_STVX_V4SF:
> > - return altivec_expand_stv_builtin (CODE_FOR_altivec_stvx_v4sf, exp);
> > + return altivec_expand_stv_builtin (CODE_FOR_altivec_stvx_v4sf_2op, exp);
> > case ALTIVEC_BUILTIN_STVX:
> > case ALTIVEC_BUILTIN_STVX_V4SI:
> > - return altivec_expand_stv_builtin (CODE_FOR_altivec_stvx_v4si, exp);
> > + return altivec_expand_stv_builtin (CODE_FOR_altivec_stvx_v4si_2op, exp);
> > case ALTIVEC_BUILTIN_STVX_V8HI:
> > - return altivec_expand_stv_builtin (CODE_FOR_altivec_stvx_v8hi, exp);
> > + return altivec_expand_stv_builtin (CODE_FOR_altivec_stvx_v8hi_2op, exp);
> > case ALTIVEC_BUILTIN_STVX_V16QI:
> > - return altivec_expand_stv_builtin (CODE_FOR_altivec_stvx_v16qi, exp);
> > + return altivec_expand_stv_builtin (CODE_FOR_altivec_stvx_v16qi_2op, exp);
> > case ALTIVEC_BUILTIN_STVEBX:
> > return altivec_expand_stv_builtin (CODE_FOR_altivec_stvebx, exp);
> > case ALTIVEC_BUILTIN_STVEHX:
> > @@ -14272,23 +14360,23 @@ altivec_expand_builtin (tree exp, rtx target, bool
> > return altivec_expand_lv_builtin (CODE_FOR_altivec_lvxl_v16qi,
> > exp, target, false);
> > case ALTIVEC_BUILTIN_LVX_V2DF:
> > - return altivec_expand_lv_builtin (CODE_FOR_altivec_lvx_v2df,
> > + return altivec_expand_lv_builtin (CODE_FOR_altivec_lvx_v2df_2op,
> > exp, target, false);
> > case ALTIVEC_BUILTIN_LVX_V2DI:
> > - return altivec_expand_lv_builtin (CODE_FOR_altivec_lvx_v2di,
> > + return altivec_expand_lv_builtin (CODE_FOR_altivec_lvx_v2di_2op,
> > exp, target, false);
> > case ALTIVEC_BUILTIN_LVX_V4SF:
> > - return altivec_expand_lv_builtin (CODE_FOR_altivec_lvx_v4sf,
> > + return altivec_expand_lv_builtin (CODE_FOR_altivec_lvx_v4sf_2op,
> > exp, target, false);
> > case ALTIVEC_BUILTIN_LVX:
> > case ALTIVEC_BUILTIN_LVX_V4SI:
> > - return altivec_expand_lv_builtin (CODE_FOR_altivec_lvx_v4si,
> > + return altivec_expand_lv_builtin (CODE_FOR_altivec_lvx_v4si_2op,
> > exp, target, false);
> > case ALTIVEC_BUILTIN_LVX_V8HI:
> > - return altivec_expand_lv_builtin (CODE_FOR_altivec_lvx_v8hi,
> > + return altivec_expand_lv_builtin (CODE_FOR_altivec_lvx_v8hi_2op,
> > exp, target, false);
> > case ALTIVEC_BUILTIN_LVX_V16QI:
> > - return altivec_expand_lv_builtin (CODE_FOR_altivec_lvx_v16qi,
> > + return altivec_expand_lv_builtin (CODE_FOR_altivec_lvx_v16qi_2op,
> > exp, target, false);
> > case ALTIVEC_BUILTIN_LVLX:
> > return altivec_expand_lv_builtin (CODE_FOR_altivec_lvlx,
> > @@ -37139,7 +37227,9 @@ insn_is_swappable_p (swap_web_entry *insn_entry, r
> > fix them up by converting them to permuting ones. Exceptions:
> > UNSPEC_LVE, UNSPEC_LVX, and UNSPEC_STVX, which have a PARALLEL
> > body instead of a SET; and UNSPEC_STVE, which has an UNSPEC
> > - for the SET source. */
> > + for the SET source. Also we must now make an exception for lvx
> > + and stvx when they are not in the UNSPEC_LVX/STVX form (with the
> > + explicit "& -16") since this leads to unrecognizable insns. */
> > rtx body = PATTERN (insn);
> > int i = INSN_UID (insn);
> >
> > @@ -37147,6 +37237,11 @@ insn_is_swappable_p (swap_web_entry *insn_entry, r
> > {
> > if (GET_CODE (body) == SET)
> > {
> > + rtx rhs = SET_SRC (body);
> > + gcc_assert (GET_CODE (rhs) == MEM);
> > + if (GET_CODE (XEXP (rhs, 0)) == AND)
> > + return 0;
> > +
> > *special = SH_NOSWAP_LD;
> > return 1;
> > }
> > @@ -37156,8 +37251,14 @@ insn_is_swappable_p (swap_web_entry *insn_entry, r
> >
> > if (insn_entry[i].is_store)
> > {
> > - if (GET_CODE (body) == SET && GET_CODE (SET_SRC (body)) != UNSPEC)
> > + if (GET_CODE (body) == SET
> > + && GET_CODE (SET_SRC (body)) != UNSPEC)
> > {
> > + rtx lhs = SET_DEST (body);
> > + gcc_assert (GET_CODE (lhs) == MEM);
> > + if (GET_CODE (XEXP (lhs, 0)) == AND)
> > + return 0;
> > +
> > *special = SH_NOSWAP_ST;
> > return 1;
> > }
> > @@ -37827,6 +37928,267 @@ dump_swap_insn_table (swap_web_entry *insn_entry)
> > fputs ("\n", dump_file);
> > }
> >
> > +/* Return RTX with its address canonicalized to (reg) or (+ reg reg).
> > + Here RTX is an (& addr (const_int -16)). Always return a new copy
> > + to avoid problems with combine. */
> > +static rtx
> > +alignment_with_canonical_addr (rtx align)
> > +{
> > + rtx canon;
> > + rtx addr = XEXP (align, 0);
> > +
> > + if (REG_P (addr))
> > + canon = addr;
> > +
> > + else if (GET_CODE (addr) == PLUS)
> > + {
> > + rtx addrop0 = XEXP (addr, 0);
> > + rtx addrop1 = XEXP (addr, 1);
> > +
> > + if (!REG_P (addrop0))
> > + addrop0 = force_reg (GET_MODE (addrop0), addrop0);
> > +
> > + if (!REG_P (addrop1))
> > + addrop1 = force_reg (GET_MODE (addrop1), addrop1);
> > +
> > + canon = gen_rtx_PLUS (GET_MODE (addr), addrop0, addrop1);
> > + }
> > +
> > + else
> > + canon = force_reg (GET_MODE (addr), addr);
> > +
> > + return gen_rtx_AND (GET_MODE (align), canon, GEN_INT (-16));
> > +}
> > +
> > +/* Check whether an rtx is an alignment mask, and if so, return
> > + a fully-expanded rtx for the masking operation. */
> > +static rtx
> > +alignment_mask (rtx_insn *insn)
> > +{
> > + rtx body = PATTERN (insn);
> > +
> > + if (GET_CODE (body) != SET
> > + || GET_CODE (SET_SRC (body)) != AND
> > + || !REG_P (XEXP (SET_SRC (body), 0)))
> > + return 0;
> > +
> > + rtx mask = XEXP (SET_SRC (body), 1);
> > +
> > + if (GET_CODE (mask) == CONST_INT)
> > + {
> > + if (INTVAL (mask) == -16)
> > + return alignment_with_canonical_addr (SET_SRC (body));
> > + else
> > + return 0;
> > + }
> > +
> > + if (!REG_P (mask))
> > + return 0;
> > +
> > + struct df_insn_info *insn_info = DF_INSN_INFO_GET (insn);
> > + df_ref use;
> > + rtx real_mask = 0;
> > +
> > + FOR_EACH_INSN_INFO_USE (use, insn_info)
> > + {
> > + if (!rtx_equal_p (DF_REF_REG (use), mask))
> > + continue;
> > +
> > + struct df_link *def_link = DF_REF_CHAIN (use);
> > + if (!def_link || def_link->next)
> > + return 0;
> > +
> > + rtx_insn *const_insn = DF_REF_INSN (def_link->ref);
> > + rtx const_body = PATTERN (const_insn);
> > + if (GET_CODE (const_body) != SET)
> > + return 0;
> > +
> > + real_mask = SET_SRC (const_body);
> > +
> > + if (GET_CODE (real_mask) != CONST_INT
> > + || INTVAL (real_mask) != -16)
> > + return 0;
> > + }
> > +
> > + if (real_mask == 0)
> > + return 0;
> > +
> > + return alignment_with_canonical_addr (SET_SRC (body));
> > +}
> > +
> > +/* Given INSN that's a load or store based at BASE_REG, look for a
> > + feeding computation that aligns its address on a 16-byte boundary. */
> > +static rtx
> > +find_alignment_op (rtx_insn *insn, rtx base_reg)
> > +{
> > + df_ref base_use;
> > + struct df_insn_info *insn_info = DF_INSN_INFO_GET (insn);
> > + rtx and_operation = 0;
> > +
> > + FOR_EACH_INSN_INFO_USE (base_use, insn_info)
> > + {
> > + if (!rtx_equal_p (DF_REF_REG (base_use), base_reg))
> > + continue;
> > +
> > + struct df_link *base_def_link = DF_REF_CHAIN (base_use);
> > + if (!base_def_link || base_def_link->next)
> > + break;
> > +
> > + rtx_insn *and_insn = DF_REF_INSN (base_def_link->ref);
> > + and_operation = alignment_mask (and_insn);
> > + if (and_operation != 0)
> > + break;
> > + }
> > +
> > + return and_operation;
> > +}
> > +
> > +struct del_info { bool replace; rtx_insn *replace_insn; };
> > +
> > +/* If INSN is the load for an lvx pattern, put it in canonical form. */
> > +static void
> > +combine_lvx_pattern (rtx_insn *insn, del_info *to_delete)
> > +{
> > + rtx body = PATTERN (insn);
> > + gcc_assert (GET_CODE (body) == SET
> > + && GET_CODE (SET_SRC (body)) == VEC_SELECT
> > + && GET_CODE (XEXP (SET_SRC (body), 0)) == MEM);
> > +
> > + rtx mem = XEXP (SET_SRC (body), 0);
> > + rtx base_reg = XEXP (mem, 0);
> > +
> > + rtx and_operation = find_alignment_op (insn, base_reg);
> > +
> > + if (and_operation != 0)
> > + {
> > + df_ref def;
> > + struct df_insn_info *insn_info = DF_INSN_INFO_GET (insn);
> > + FOR_EACH_INSN_INFO_DEF (def, insn_info)
> > + {
> > + struct df_link *link = DF_REF_CHAIN (def);
> > + if (!link || link->next)
> > + break;
> > +
> > + rtx_insn *swap_insn = DF_REF_INSN (link->ref);
> > + if (!insn_is_swap_p (swap_insn)
> > + || insn_is_load_p (swap_insn)
> > + || insn_is_store_p (swap_insn))
> > + break;
> > +
> > + /* Expected lvx pattern found. Change the swap to
> > + a copy, and propagate the AND operation into the
> > + load. */
> > + to_delete[INSN_UID (swap_insn)].replace = true;
> > + to_delete[INSN_UID (swap_insn)].replace_insn = swap_insn;
> > +
> > + XEXP (mem, 0) = and_operation;
> > + SET_SRC (body) = mem;
> > + INSN_CODE (insn) = -1; /* Force re-recognition. */
> > + df_insn_rescan (insn);
> > +
> > + if (dump_file)
> > + fprintf (dump_file, "lvx opportunity found at %d\n",
> > + INSN_UID (insn));
> > + }
> > + }
> > +}
> > +
> > +/* If INSN is the store for an stvx pattern, put it in canonical form. */
> > +static void
> > +combine_stvx_pattern (rtx_insn *insn, del_info *to_delete)
> > +{
> > + rtx body = PATTERN (insn);
> > + gcc_assert (GET_CODE (body) == SET
> > + && GET_CODE (SET_DEST (body)) == MEM
> > + && GET_CODE (SET_SRC (body)) == VEC_SELECT);
> > + rtx mem = SET_DEST (body);
> > + rtx base_reg = XEXP (mem, 0);
> > +
> > + rtx and_operation = find_alignment_op (insn, base_reg);
> > +
> > + if (and_operation != 0)
> > + {
> > + rtx src_reg = XEXP (SET_SRC (body), 0);
> > + df_ref src_use;
> > + struct df_insn_info *insn_info = DF_INSN_INFO_GET (insn);
> > + FOR_EACH_INSN_INFO_USE (src_use, insn_info)
> > + {
> > + if (!rtx_equal_p (DF_REF_REG (src_use), src_reg))
> > + continue;
> > +
> > + struct df_link *link = DF_REF_CHAIN (src_use);
> > + if (!link || link->next)
> > + break;
> > +
> > + rtx_insn *swap_insn = DF_REF_INSN (link->ref);
> > + if (!insn_is_swap_p (swap_insn)
> > + || insn_is_load_p (swap_insn)
> > + || insn_is_store_p (swap_insn))
> > + break;
> > +
> > + /* Expected stvx pattern found. Change the swap to
> > + a copy, and propagate the AND operation into the
> > + store. */
> > + to_delete[INSN_UID (swap_insn)].replace = true;
> > + to_delete[INSN_UID (swap_insn)].replace_insn = swap_insn;
> > +
> > + XEXP (mem, 0) = and_operation;
> > + SET_SRC (body) = src_reg;
> > + INSN_CODE (insn) = -1; /* Force re-recognition. */
> > + df_insn_rescan (insn);
> > +
> > + if (dump_file)
> > + fprintf (dump_file, "stvx opportunity found at %d\n",
> > + INSN_UID (insn));
> > + }
> > + }
> > +}
> > +
> > +/* Look for patterns created from builtin lvx and stvx calls, and
> > + canonicalize them to be properly recognized as such. */
> > +static void
> > +combine_lvx_stvx_patterns (function *fun)
> > +{
> > + int i;
> > + basic_block bb;
> > + rtx_insn *insn;
> > +
> > + int num_insns = get_max_uid ();
> > + del_info *to_delete = XCNEWVEC (del_info, num_insns);
> > +
> > + FOR_ALL_BB_FN (bb, fun)
> > + FOR_BB_INSNS (bb, insn)
> > + {
> > + if (!NONDEBUG_INSN_P (insn))
> > + continue;
> > +
> > + if (insn_is_load_p (insn) && insn_is_swap_p (insn))
> > + combine_lvx_pattern (insn, to_delete);
> > + else if (insn_is_store_p (insn) && insn_is_swap_p (insn))
> > + combine_stvx_pattern (insn, to_delete);
> > + }
> > +
> > + /* Turning swaps into copies is delayed until now, to avoid problems
> > + with deleting instructions during the insn walk. */
> > + for (i = 0; i < num_insns; i++)
> > + if (to_delete[i].replace)
> > + {
> > + rtx swap_body = PATTERN (to_delete[i].replace_insn);
> > + rtx src_reg = XEXP (SET_SRC (swap_body), 0);
> > + rtx copy = gen_rtx_SET (SET_DEST (swap_body), src_reg);
> > + rtx_insn *new_insn = emit_insn_before (copy,
> > + to_delete[i].replace_insn);
> > + set_block_for_insn (new_insn,
> > + BLOCK_FOR_INSN (to_delete[i].replace_insn));
> > + df_insn_rescan (new_insn);
> > + df_insn_delete (to_delete[i].replace_insn);
> > + remove_insn (to_delete[i].replace_insn);
> > + to_delete[i].replace_insn->set_deleted ();
> > + }
> > +
> > + free (to_delete);
> > +}
> > +
> > /* Main entry point for this pass. */
> > unsigned int
> > rs6000_analyze_swaps (function *fun)
> > @@ -37833,7 +38195,7 @@ rs6000_analyze_swaps (function *fun)
> > {
> > swap_web_entry *insn_entry;
> > basic_block bb;
> > - rtx_insn *insn;
> > + rtx_insn *insn, *curr_insn = 0;
> >
> > /* Dataflow analysis for use-def chains. */
> > df_set_flags (DF_RD_PRUNE_DEAD_DEFS);
> > @@ -37841,12 +38203,15 @@ rs6000_analyze_swaps (function *fun)
> > df_analyze ();
> > df_set_flags (DF_DEFER_INSN_RESCAN);
> >
> > + /* Pre-pass to combine lvx and stvx patterns so we don't lose info. */
> > + combine_lvx_stvx_patterns (fun);
> > +
> > /* Allocate structure to represent webs of insns. */
> > insn_entry = XCNEWVEC (swap_web_entry, get_max_uid ());
> >
> > /* Walk the insns to gather basic data. */
> > FOR_ALL_BB_FN (bb, fun)
> > - FOR_BB_INSNS (bb, insn)
> > + FOR_BB_INSNS_SAFE (bb, insn, curr_insn)
> > {
> > unsigned int uid = INSN_UID (insn);
> > if (NONDEBUG_INSN_P (insn))
> > Index: gcc/config/rs6000/vector.md
> > ===================================================================
> > --- gcc/config/rs6000/vector.md (revision 235090)
> > +++ gcc/config/rs6000/vector.md (working copy)
> > @@ -167,7 +167,14 @@
> > if (VECTOR_MEM_VSX_P (<MODE>mode))
> > {
> > operands[1] = rs6000_address_for_altivec (operands[1]);
> > - emit_insn (gen_altivec_lvx_<mode> (operands[0], operands[1]));
> > + rtx and_op = XEXP (operands[1], 0);
> > + gcc_assert (GET_CODE (and_op) == AND);
> > + rtx addr = XEXP (and_op, 0);
> > + if (GET_CODE (addr) == PLUS)
> > + emit_insn (gen_altivec_lvx_<mode>_2op (operands[0], XEXP (addr, 0),
> > + XEXP (addr, 1)));
> > + else
> > + emit_insn (gen_altivec_lvx_<mode>_1op (operands[0], operands[1]));
> > DONE;
> > }
> > }")
> > @@ -183,7 +190,14 @@
> > if (VECTOR_MEM_VSX_P (<MODE>mode))
> > {
> > operands[0] = rs6000_address_for_altivec (operands[0]);
> > - emit_insn (gen_altivec_stvx_<mode> (operands[0], operands[1]));
> > + rtx and_op = XEXP (operands[0], 0);
> > + gcc_assert (GET_CODE (and_op) == AND);
> > + rtx addr = XEXP (and_op, 0);
> > + if (GET_CODE (addr) == PLUS)
> > + emit_insn (gen_altivec_stvx_<mode>_2op (operands[1], XEXP (addr, 0),
> > + XEXP (addr, 1)));
> > + else
> > + emit_insn (gen_altivec_stvx_<mode>_1op (operands[1], operands[0]));
> > DONE;
> > }
> > }")
> >
> >
>
>