This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
[arm-embedded][PATCH, ARM 3/6] Fix indentation of FL_FOR_ARCH* definition after adding support for ARMv8-M
- From: "Thomas Preud'homme" <thomas dot preudhomme at foss dot arm dot com>
- To: <gcc-patches at gcc dot gnu dot org>
- Date: Thu, 17 Dec 2015 15:53:45 +0800
- Subject: [arm-embedded][PATCH, ARM 3/6] Fix indentation of FL_FOR_ARCH* definition after adding support for ARMv8-M
- Authentication-results: sourceware.org; auth=none
Hi,
We decided to apply the following patch to the ARM embedded 5 branch.
Best regards,
Thomas
> -----Original Message-----
> From: gcc-patches-owner@gcc.gnu.org [mailto:gcc-patches-
> owner@gcc.gnu.org] On Behalf Of Thomas Preud'homme
> Sent: Thursday, December 17, 2015 3:51 PM
> To: gcc-patches@gcc.gnu.org
> Subject: [PATCH, ARM 3/8] Fix indentation of FL_FOR_ARCH* definition
> after adding support for ARMv8-M
>
> Hi,
>
> This patch is part of a patch series to add support for ARMv8-M[1] to GCC.
> This specific patch fixes the indentation of FL_FOR_ARCH* macros
> definition following the patch to add support for ARMv8-M. Since this is
> an obvious change, I'm not expecting a review and will commit it as soon
> as the other patches in the series are accepted.
>
> [1] For a quick overview of ARMv8-M please refer to the initial cover
> letter.
>
> ChangeLog entry is as follows:
>
>
> *** gcc/ChangeLog ***
>
> 2015-11-06 Thomas Preud'homme <thomas.preudhomme@arm.com>
>
> * config/arm/arm-protos.h: Reindent FL_FOR_* macro definitions.
>
>
> diff --git a/gcc/config/arm/arm-protos.h b/gcc/config/arm/arm-protos.h
> index 1371ee7..bf0d1b4 100644
> --- a/gcc/config/arm/arm-protos.h
> +++ b/gcc/config/arm/arm-protos.h
> @@ -391,32 +391,33 @@ extern bool arm_is_constant_pool_ref (rtx);
> #define FL_TUNE (FL_WBUF | FL_VFPV2 | FL_STRONG |
> FL_LDSCHED \
> | FL_CO_PROC)
>
> -#define FL_FOR_ARCH2 FL_NOTM
> -#define FL_FOR_ARCH3 (FL_FOR_ARCH2 | FL_MODE32)
> -#define FL_FOR_ARCH3M (FL_FOR_ARCH3 | FL_ARCH3M)
> -#define FL_FOR_ARCH4 (FL_FOR_ARCH3M | FL_ARCH4)
> -#define FL_FOR_ARCH4T (FL_FOR_ARCH4 | FL_THUMB)
> -#define FL_FOR_ARCH5 (FL_FOR_ARCH4 | FL_ARCH5)
> -#define FL_FOR_ARCH5T (FL_FOR_ARCH5 | FL_THUMB)
> -#define FL_FOR_ARCH5E (FL_FOR_ARCH5 | FL_ARCH5E)
> -#define FL_FOR_ARCH5TE (FL_FOR_ARCH5E | FL_THUMB)
> -#define FL_FOR_ARCH5TEJ FL_FOR_ARCH5TE
> -#define FL_FOR_ARCH6 (FL_FOR_ARCH5TE | FL_ARCH6)
> -#define FL_FOR_ARCH6J FL_FOR_ARCH6
> -#define FL_FOR_ARCH6K (FL_FOR_ARCH6 | FL_ARCH6K)
> -#define FL_FOR_ARCH6Z FL_FOR_ARCH6
> -#define FL_FOR_ARCH6KZ (FL_FOR_ARCH6K | FL_ARCH6KZ)
> -#define FL_FOR_ARCH6T2 (FL_FOR_ARCH6 | FL_THUMB2)
> -#define FL_FOR_ARCH6M (FL_FOR_ARCH6 & ~FL_NOTM)
> -#define FL_FOR_ARCH7 ((FL_FOR_ARCH6T2 & ~FL_NOTM) |
> FL_ARCH7)
> -#define FL_FOR_ARCH7A (FL_FOR_ARCH7 | FL_NOTM |
> FL_ARCH6K)
> -#define FL_FOR_ARCH7VE (FL_FOR_ARCH7A | FL_THUMB_DIV |
> FL_ARM_DIV)
> -#define FL_FOR_ARCH7R (FL_FOR_ARCH7A | FL_THUMB_DIV)
> -#define FL_FOR_ARCH7M (FL_FOR_ARCH7 | FL_THUMB_DIV)
> -#define FL_FOR_ARCH7EM (FL_FOR_ARCH7M | FL_ARCH7EM)
> -#define FL_FOR_ARCH8A (FL_FOR_ARCH7VE | FL_ARCH8)
> -#define FL_FOR_ARCH8M_BASE (FL_FOR_ARCH6M | FL_ARCH8 |
> FL_THUMB_DIV)
> -#define FL_FOR_ARCH8M_MAIN (FL_FOR_ARCH7M | FL_ARCH8)
> +#define FL_FOR_ARCH2 FL_NOTM
> +#define FL_FOR_ARCH3 (FL_FOR_ARCH2 | FL_MODE32)
> +#define FL_FOR_ARCH3M (FL_FOR_ARCH3 | FL_ARCH3M)
> +#define FL_FOR_ARCH4 (FL_FOR_ARCH3M | FL_ARCH4)
> +#define FL_FOR_ARCH4T (FL_FOR_ARCH4 | FL_THUMB)
> +#define FL_FOR_ARCH5 (FL_FOR_ARCH4 | FL_ARCH5)
> +#define FL_FOR_ARCH5T (FL_FOR_ARCH5 | FL_THUMB)
> +#define FL_FOR_ARCH5E (FL_FOR_ARCH5 | FL_ARCH5E)
> +#define FL_FOR_ARCH5TE (FL_FOR_ARCH5E | FL_THUMB)
> +#define FL_FOR_ARCH5TEJ FL_FOR_ARCH5TE
> +#define FL_FOR_ARCH6 (FL_FOR_ARCH5TE | FL_ARCH6)
> +#define FL_FOR_ARCH6J FL_FOR_ARCH6
> +#define FL_FOR_ARCH6K (FL_FOR_ARCH6 | FL_ARCH6K)
> +#define FL_FOR_ARCH6Z FL_FOR_ARCH6
> +#define FL_FOR_ARCH6ZK FL_FOR_ARCH6K
> +#define FL_FOR_ARCH6KZ (FL_FOR_ARCH6K | FL_ARCH6KZ)
> +#define FL_FOR_ARCH6T2 (FL_FOR_ARCH6 | FL_THUMB2)
> +#define FL_FOR_ARCH6M (FL_FOR_ARCH6 & ~FL_NOTM)
> +#define FL_FOR_ARCH7 ((FL_FOR_ARCH6T2 & ~FL_NOTM)
> | FL_ARCH7)
> +#define FL_FOR_ARCH7A (FL_FOR_ARCH7 | FL_NOTM |
> FL_ARCH6K)
> +#define FL_FOR_ARCH7VE (FL_FOR_ARCH7A |
> FL_THUMB_DIV | FL_ARM_DIV)
> +#define FL_FOR_ARCH7R (FL_FOR_ARCH7A |
> FL_THUMB_DIV)
> +#define FL_FOR_ARCH7M (FL_FOR_ARCH7 |
> FL_THUMB_DIV)
> +#define FL_FOR_ARCH7EM (FL_FOR_ARCH7M |
> FL_ARCH7EM)
> +#define FL_FOR_ARCH8A (FL_FOR_ARCH7VE | FL_ARCH8)
> +#define FL_FOR_ARCH8M_BASE (FL_FOR_ARCH6M | FL_ARCH8 |
> FL_THUMB_DIV)
> +#define FL_FOR_ARCH8M_MAIN (FL_FOR_ARCH7M | FL_ARCH8)
>
> /* There are too many feature bits to fit in a single word so the set of
> cpu and
> fpu capabilities is a structure. A feature set is created and manipulated
>
>
> Is this ok for stage3?
>
> Best regards,
>
> Thomas