This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
[PATCH, RS6000] gpc_reg_operand
- From: Alan Modra <amodra at gmail dot com>
- To: gcc-patches at gcc dot gnu dot org
- Cc: David Edelsohn <dje dot gcc at gmail dot com>
- Date: Tue, 19 May 2015 10:39:02 +0930
- Subject: [PATCH, RS6000] gpc_reg_operand
- Authentication-results: sourceware.org; auth=none
gpc_reg_operand contains a test that dates back to the early 1990s,
when FIRST_PSEUDO_REGISTER was 76. At that point, testing
REGNO (op) >= ARG_POINTER_REGNUM allowed ap, xer/ca, cr0..cr7 and
pseudos. A later patch corrected this to remove xer. Nowadays we
have a lot more hard registers, altivec, vsx, htm, spe hi. Some of
these are definitely special registers so not appropriate for
gpc_reg_operand to match. This patch corrects the situation, to
just allow pseudos, int, fp, altivec and vsx. ap and sfp are allowed
via INT_REGNO_P. Note that I've removed cr0..cr7. I believe this is
OK along with the extzvdi_internal2 change. I checked all uses of
gpc_reg_operand and predicates derived from gpc_reg_operand.
The patch also removes some operand predicates I discovered were
unused, and tightens the vr save/restore patterns I added some time
ago. Bootstrapped and regression tested powerpc64le-linux and
powerpc64-linux, the latter with -mcpu=power7. OK for mainline?
* config/rs6000/predicates.md (gpc_reg_operand): Don't allow all
hard registers numbered greater or equal to ARG_POINTER_REGNUM.
(reg_or_neg_short_operand, fix_trunc_dest_operand): Delete
unused predicates.
* config/rs6000/altivec.md (save_vregs_*, restore_vregs_*):
Use altivec_register_operand. Make insn predicate TARGET_ALTIVEC.
* config/rs6000/rs6000.md (extzvdi_internal2): Use cc_reg_operand.
* config/rs6000/vsx.md (vsx_float<VSi><mode>2): Expand comment.
Index: gcc/config/rs6000/predicates.md
===================================================================
--- gcc/config/rs6000/predicates.md (revision 223208)
+++ gcc/config/rs6000/predicates.md (working copy)
@@ -207,9 +207,12 @@
if (!REG_P (op))
return 0;
- if (REGNO (op) >= ARG_POINTER_REGNUM && !CA_REGNO_P (REGNO (op)))
+ if (REGNO (op) >= FIRST_PSEUDO_REGISTER)
return 1;
+ if (TARGET_ALTIVEC && ALTIVEC_REGNO_P (REGNO (op)))
+ return 1;
+
if (TARGET_VSX && VSX_REGNO_P (REGNO (op)))
return 1;
@@ -357,17 +360,6 @@
(match_operand 0 "short_cint_operand")
(match_operand 0 "gpc_reg_operand")))
-;; Return 1 if op is a constant integer valid whose negation is valid for
-;; D field or non-special register register.
-;; Do not allow a constant zero because all patterns that call this
-;; predicate use "addic r1,r2,-const" to set carry when r2 is greater than
-;; or equal to const, which does not work for zero.
-(define_predicate "reg_or_neg_short_operand"
- (if_then_else (match_code "const_int")
- (match_test "satisfies_constraint_P (op)
- && INTVAL (op) != 0")
- (match_operand 0 "gpc_reg_operand")))
-
;; Return 1 if op is a constant integer valid for DS field
;; or non-special register.
(define_predicate "reg_or_aligned_short_operand"
@@ -713,15 +705,6 @@
|| (GET_CODE (XEXP (op, 0)) == PRE_MODIFY
&& indexed_address (XEXP (XEXP (op, 0), 1), mode))))"))
-;; Used for the destination of the fix_truncdfsi2 expander.
-;; If stfiwx will be used, the result goes to memory; otherwise,
-;; we're going to emit a store and a load of a subreg, so the dest is a
-;; register.
-(define_predicate "fix_trunc_dest_operand"
- (if_then_else (match_test "! TARGET_E500_DOUBLE && TARGET_PPC_GFXOPT")
- (match_operand 0 "memory_operand")
- (match_operand 0 "gpc_reg_operand")))
-
;; Return 1 if the operand is either a non-special register or can be used
;; as the operand of a `mode' add insn.
(define_predicate "add_operand"
Index: gcc/config/rs6000/altivec.md
===================================================================
--- gcc/config/rs6000/altivec.md (revision 223208)
+++ gcc/config/rs6000/altivec.md (working copy)
@@ -353,8 +353,8 @@
(use (reg:P 0))
(set (mem:V4SI (plus:P (match_operand:P 2 "gpc_reg_operand" "b")
(match_operand:P 3 "short_cint_operand" "I")))
- (match_operand:V4SI 4 "gpc_reg_operand" "v"))])]
- ""
+ (match_operand:V4SI 4 "altivec_register_operand" "v"))])]
+ "TARGET_ALTIVEC"
"bl %1"
[(set_attr "type" "branch")
(set_attr "length" "4")])
@@ -367,8 +367,8 @@
(use (reg:P 0))
(set (mem:V4SI (plus:P (match_operand:P 2 "gpc_reg_operand" "b")
(match_operand:P 3 "short_cint_operand" "I")))
- (match_operand:V4SI 4 "gpc_reg_operand" "v"))])]
- ""
+ (match_operand:V4SI 4 "altivec_register_operand" "v"))])]
+ "TARGET_ALTIVEC"
"bl %1"
[(set_attr "type" "branch")
(set_attr "length" "4")])
@@ -379,10 +379,10 @@
(use (match_operand:P 1 "symbol_ref_operand" "s"))
(clobber (reg:P 11))
(use (reg:P 0))
- (set (match_operand:V4SI 2 "gpc_reg_operand" "=v")
+ (set (match_operand:V4SI 2 "altivec_register_operand" "=v")
(mem:V4SI (plus:P (match_operand:P 3 "gpc_reg_operand" "b")
(match_operand:P 4 "short_cint_operand" "I"))))])]
- ""
+ "TARGET_ALTIVEC"
"bl %1"
[(set_attr "type" "branch")
(set_attr "length" "4")])
@@ -393,10 +393,10 @@
(use (match_operand:P 1 "symbol_ref_operand" "s"))
(clobber (reg:P 12))
(use (reg:P 0))
- (set (match_operand:V4SI 2 "gpc_reg_operand" "=v")
+ (set (match_operand:V4SI 2 "altivec_register_operand" "=v")
(mem:V4SI (plus:P (match_operand:P 3 "gpc_reg_operand" "b")
(match_operand:P 4 "short_cint_operand" "I"))))])]
- ""
+ "TARGET_ALTIVEC"
"bl %1"
[(set_attr "type" "branch")
(set_attr "length" "4")])
Index: gcc/config/rs6000/rs6000.md
===================================================================
--- gcc/config/rs6000/rs6000.md (revision 223208)
+++ gcc/config/rs6000/rs6000.md (working copy)
@@ -3653,7 +3653,7 @@
(set_attr "dot" "yes")])
(define_insn "*extzvdi_internal2"
- [(set (match_operand:CC 4 "gpc_reg_operand" "=x")
+ [(set (match_operand:CC 4 "cc_reg_operand" "=x")
(compare:CC (zero_extract:DI (match_operand:DI 1 "gpc_reg_operand" "r")
(match_operand:SI 2 "const_int_operand" "i")
(match_operand:SI 3 "const_int_operand" "i"))
Index: gcc/config/rs6000/vsx.md
===================================================================
--- gcc/config/rs6000/vsx.md (revision 223208)
+++ gcc/config/rs6000/vsx.md (working copy)
@@ -1199,7 +1199,8 @@
;; the fprs because we don't want to add the altivec registers to movdi/movsi.
;; For the unsigned tests, there isn't a generic double -> unsigned conversion
;; in rs6000.md so don't test VECTOR_UNIT_VSX_P, just test against VSX.
-;; Don't use vsx_register_operand here, use gpc_reg_operand to match rs6000.md.
+;; Don't use vsx_register_operand here, use gpc_reg_operand to match rs6000.md
+;; in allowing virtual registers.
(define_insn "vsx_float<VSi><mode>2"
[(set (match_operand:VSX_F 0 "gpc_reg_operand" "=<VSr>,?<VSa>")
(float:VSX_F (match_operand:<VSI> 1 "gpc_reg_operand" "<VSr2>,<VSr3>")))]
--
Alan Modra
Australia Development Lab, IBM