This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
PATCH: PRs bootstrap/59580/59583: Improve x86 --with-arch/--with-cpu= configure handling
- From: "H.J. Lu" <hjl dot tools at gmail dot com>
- To: Uros Bizjak <ubizjak at gmail dot com>, bonzini at gnu dot org
- Cc: Jakub Jelinek <jakub at redhat dot com>, GCC Patches <gcc-patches at gcc dot gnu dot org>
- Date: Mon, 23 Dec 2013 06:14:11 -0800
- Subject: PATCH: PRs bootstrap/59580/59583: Improve x86 --with-arch/--with-cpu= configure handling
- Authentication-results: sourceware.org; auth=none
- References: <CAFULd4Zr_cjNiXxfYtEE6YP4R8VzgWLS3XS1UN9DQQrVTGG8YA at mail dot gmail dot com> <20131219164556 dot GX892 at tucnak dot redhat dot com> <CAFULd4ZcmYU7nx54=xfWZ-TpFh9OJ2r0Qp9UhMfaSEOHSiyzww at mail dot gmail dot com> <20131220164740 dot GA46311 at msticlxl7 dot ims dot intel dot com> <CAMe9rOr78_-ww48+d6kRtc0rprmM9maROEwt1GtysJ7vNxzkqg at mail dot gmail dot com> <CAFULd4Z4O1irpoAoQvRstVBwXnh3U6WQa4wV=j0Gxqj4PeZFig at mail dot gmail dot com> <20131222125549 dot GN892 at tucnak dot redhat dot com> <20131222160434 dot GA3086 at gmail dot com> <20131222192830 dot GA10682 at gmail dot com> <CAFULd4ZF0_dkRyA-ZSnS5XjTzdvKt-fZmiJ46PofaEJi+Y5x7Q at mail dot gmail dot com>
On Sun, Dec 22, 2013 at 11:11:12PM +0100, Uros Bizjak wrote:
> Please get someone to review config.gcc changes. They are OK as far as
> x86 rename is concerned, but I can't review functional changes.
Hi Paolo,
Can you review this config.gcc change?
>
> > @@ -588,6 +588,22 @@ esac
> > # Common C libraries.
> > tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
> >
> > +# 32-bit x86 processors supported by --with-arch=. Each processor
> > +# MUST be separated by exactly one space.
> > +x86_archs="athlon athlon-4 athlon-fx athlon-mp athlon-tbird \
> > +athlon-xp k6 k6-2 k6-3 geode c3 c3-2 winchip-c6 winchip2 i386 i486 \
> > +i586 i686 pentium pentium-m pentium-mmx pentium2 pentium3 pentium3m \
> > +pentium4 pentium4m pentiumpro prescott"
>
> Missing "native".
x86_archs contains 32-bit x86 processors. "native" is allowed for
64-bit targets and is included in x86_64_archs. 64-bit processors
can be used in --with-arch/--with-cpu= for 32-bit targets.
Here is a patch to improve x86 x86 --with-arch/--with-cpu= configure
handling. This patch defines 3 variables:
1. x86_archs: It contains 32-bit x86 processors supported by
--with-arch=, which aren't allowed for 64-bit targets.
2. x86_64_archs: It contains 64-bit x86 processors supported by
--with-arch=, which are allowed for both 32-bit and 64-bit targets.
3. x86_cpus. It contains x86 processors supported by --with-cpu=,
which are allowed for both 32-bit and 64-bit targets.
Each processor in those 3 variables are separated by exactly one space.
Instead of checking if a value of --with-arch/--with-cpu= is valid in many
difference places with
case ${val} in
valid pattern list)
OK
;;
*)
error
exit 1
;;
esac
and updating all pattern lists when adding a new processor, this patch
uses
case " valid processor list separated by exactly one space " in
*" ${val} "*)
OK
;;
*)
error
exit 1
;;
esac
"valid processor list separated by exactly one space" is combination
of 3 processor variables. It only needs separate a check for empty
value with
if test x${val} != x; then
$val isn't empty
else
$val is empty
fi
With this approach, we only need to add new 32-bit processors to x86_archs
and new 64-bit processors to x86_64_archs. They will be supported by
--with-arch/--with-cpu= automatically. OK to install?
Thanks.
H.J.
---
2013-12-23 H.J. Lu <hongjiu.lu@intel.com>
PR bootstrap/59580
PR bootstrap/59583
* config.gcc (x86_archs): New variable.
(x86_64_archs): Likewise.
(x86_cpus): Likewise.
Use $x86_archs, $x86_64_archs and $x86_cpus to check valid
--with-arch/--with-cpu= options.
Support --with-arch=/--with-cpu={nehalem,westmere,
sandybridge,ivybridge,haswell,broadwell,bonnell,silvermont}.
diff --git a/gcc/config.gcc b/gcc/config.gcc
index 24dbaf9..51eb2b1 100644
--- a/gcc/config.gcc
+++ b/gcc/config.gcc
@@ -588,6 +588,22 @@ esac
# Common C libraries.
tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
+# 32-bit x86 processors supported by --with-arch=. Each processor
+# MUST be separated by exactly one space.
+x86_archs="athlon athlon-4 athlon-fx athlon-mp athlon-tbird \
+athlon-xp k6 k6-2 k6-3 geode c3 c3-2 winchip-c6 winchip2 i386 i486 \
+i586 i686 pentium pentium-m pentium-mmx pentium2 pentium3 pentium3m \
+pentium4 pentium4m pentiumpro prescott"
+# 64-bit x86 processors supported by --with-arch=. Each processor
+# MUST be separated by exactly one space.
+x86_64_archs="amdfam10 athlon64 athlon64-sse3 barcelona bdver1 bdver2 \
+bdver3 bdver4 btver1 btver2 k8 k8-sse3 opteron opteron-sse3 nocona \
+core2 corei7 corei7-avx core-avx-i core-avx2 atom slm nehalem westmere \
+sandybridge ivybridge haswell broadwell bonnell silvermont x86-64 native"
+# Additional x86 processors supported by --with-cpu=. Each processor
+# MUST be separated by exactly one space.
+x86_cpus="generic intel"
+
# Common parts for widely ported systems.
case ${target} in
*-*-darwin*)
@@ -1392,20 +1408,21 @@ i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i
done
TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
need_64bit_isa=yes
- case X"${with_cpu}" in
- Xgeneric|Xintel|Xatom|Xslm|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver4|Xbdver3|Xbdver2|Xbdver1|Xbtver2|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
- ;;
- X)
+ if test x$with_cpu = x; then
if test x$with_cpu_64 = x; then
with_cpu_64=generic
fi
- ;;
- *)
- echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
- echo "generic intel atom slm core2 corei7 corei7-avx nocona x86-64 bdver4 bdver3 bdver2 bdver1 btver2 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
- exit 1
- ;;
- esac
+ else
+ case " $x86_cpus $x86_archs $x86_64_archs " in
+ *" $with_cpu "*)
+ ;;
+ *)
+ echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
+ echo "$x86_cpus $x86_archs $x86_64_archs " 1>&2
+ exit 1
+ ;;
+ esac
+ fi
else
tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h i386/linux-common.h i386/linux.h"
fi
@@ -1514,20 +1531,21 @@ i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
tm_defines="${tm_defines} TARGET_BI_ARCH=1"
tmake_file="$tmake_file i386/t-sol2-64"
need_64bit_isa=yes
- case X"${with_cpu}" in
- Xgeneric|Xintel|Xatom|Xslm|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver4|Xbdver3|Xbdver2|Xbdver1|Xbtver2|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
- ;;
- X)
+ if test x$with_cpu = x; then
if test x$with_cpu_64 = x; then
with_cpu_64=generic
fi
- ;;
- *)
- echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
- echo "generic intel atom slm core2 corei7 corei7-avx nocona x86-64 bdver4 bdver3 bdver2 bdver1 btver2 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
- exit 1
- ;;
- esac
+ else
+ case " $x86_cpus $x86_archs $x86_64_archs " in
+ *" $with_cpu "*)
+ ;;
+ *)
+ echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
+ echo "$x86_cpus $x86_archs $x86_64_archs" 1>&2
+ exit 1
+ ;;
+ esac
+ fi
;;
esac
;;
@@ -1599,20 +1617,21 @@ i[34567]86-*-mingw* | x86_64-*-mingw*)
tm_file="${tm_file} i386/mingw-w64.h"
if test x$enable_targets = xall; then
tm_defines="${tm_defines} TARGET_BI_ARCH=1"
- case X"${with_cpu}" in
- Xgeneric|Xintel|Xatom|Xslm|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver4|Xbdver3|Xbdver2|Xbdver1|Xbtver2|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
- ;;
- X)
+ if test x$with_cpu = x; then
if test x$with_cpu_64 = x; then
with_cpu_64=generic
fi
- ;;
- *)
- echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
- echo "generic intel atom slm core2 corei7 Xcorei7-avx nocona x86-64 bdver4 bdver3 bdver2 bdver1 btver2 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
- exit 1
- ;;
- esac
+ else
+ case " $x86_cpus $x86_archs $x86_64_archs " in
+ *" $with_cpu "*)
+ ;;
+ *)
+ echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
+ echo "$x86_cpus $x86_archs $x86_64_archs" 1>&2
+ exit 1
+ ;;
+ esac
+ fi
fi
;;
*)
@@ -3650,13 +3669,8 @@ case "${target}" in
supported_defaults="abi arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
eval "val=\$with_$which"
- case ${val} in
- i386 | i486 \
- | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
- | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
- | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
- | athlon-4 | athlon-xp | athlon-mp | geode \
- | prescott | pentium-m | pentium4m | pentium3m)
+ case " $x86_archs " in
+ *" ${val} "*)
case "${target}" in
x86_64-*-*)
case "x$which" in
@@ -3671,17 +3685,34 @@ case "${target}" in
esac
# OK
;;
- "" | x86-64 | generic | intel | native \
- | k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \
- | opteron-sse3 | athlon-fx | bdver4 | bdver3 | bdver2 \
- | bdver1 | btver2 | btver1 | amdfam10 | barcelona \
- | nocona | core2 | corei7 | corei7-avx | core-avx-i \
- | core-avx2 | broadwell | atom | slm)
- # OK
- ;;
*)
- echo "Unknown CPU given in --with-$which=$val." 1>&2
- exit 1
+ if test x${val} != x; then
+ case " $x86_64_archs " in
+ *" ${val} "*)
+ # OK
+ ;;
+ *)
+ # Allow $x86_cpus --with-cpu=/--with-tune=
+ case "x$which" in
+ xcpu*|xtune*)
+ case " $x86_cpus " in
+ *" ${val} "*)
+ # OK
+ ;;
+ *)
+ echo "Unknown CPU given in --with-$which=$val." 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+ *)
+ echo "Unknown CPU given in --with-$which=$val." 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+ esac
+ fi
;;
esac
done
--
1.8.4.2