This is the mail archive of the gcc-patches@gcc.gnu.org mailing list for the GCC project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[PATCH, ARM] Avoid element-order-dependent operations for quad-word vectors in big-endian mode for NEON


(Sending to the right mailing list address this time, sorry for
duplicates!)

Hi,

This patch fixes a large number of execution failures which occur when
compiling with NEON and auto-vectorization enabled in big-endian mode,
particularly when -mvectorize-with-neon-quad is in use.

The basic issue (as discussed several times previously, e.g.
http://gcc.gnu.org/ml/gcc-patches/2010-06/msg00409.html) is that
NEON quad-word vectors are formed from pairs of double-word vectors,
and those pairs are "the wrong way round" in big-endian mode. This is
contrary to the middle-end's expectations, and several patterns
introduced fairly recently to the GCC NEON support fail to take this
"feature" into account.

So: in the interests of un-breaking code in big-endian mode, the
attached patch does the simplest thing possible: disabling the
troublesome patterns in big-endian mode. I experimented with other
approaches, i.e. trying to "hide" the permutations required by NEON in
the backend patterns:

  http://lists.linaro.org/pipermail/linaro-toolchain/2010-November/000536.html

But eventually came to the conclusion that it was impractical to do
that. (We're planning to revisit the "internal" ordering of vectors for
big-endian NEON in the vectorizer at least, anyway.)

I've tested this patch with custom multilib configurations
(big-endian/little-endian), with the following options:

  little-endian, -mfpu=neon -mfloat-abi=softfp

  little-endian, -mfpu=neon -mfloat-abi=softfp
     -mvectorize-with-neon-quad

  big-endian, -mfpu=neon -mfloat-abi=softfp

  big-endian, -mfpu=neon -mfloat-abi=softfp -mvectorize-with-neon-quad

Unfortunately for C only, since building C++ was broken at the time I
started testing. Some tests fail to vectorize post-patch in BE mode
(predictably, since fewer things end up vectorizable), but many
execution tests transition from FAIL to PASS.

OK to apply?

Thanks,

Julian

ChangeLog

    gcc/
    * config/arm/neon.md (vec_shr_<mode>, vec_shl_<mode>): Disable in
    big-endian mode.
    (reduc_splus_<mode>, reduc_uplus_<mode>, reduc_smin_<mode>)
    (reduc_smax_<mode>, reduc_umin_<mode>, reduc_umax_<mode>)
    (neon_vec_unpack<US>_lo_<mode>, neon_vec_unpack<US>_hi_<mode>)
    (vec_unpack<US>_hi_<mode>, vec_unpack<US>_lo_<mode>)
    (neon_vec_<US>mult_lo_<mode>, vec_widen_<US>mult_lo_<mode>)
    (neon_vec_<US>mult_hi_<mode>, vec_widen_<US>mult_hi_<mode>)
    (vec_pack_trunc_<mode>, neon_vec_pack_trunc_<mode>): Disable for Q
    registers in big-endian mode.
Index: gcc/config/arm/neon.md
===================================================================
--- gcc/config/arm/neon.md	(revision 167434)
+++ gcc/config/arm/neon.md	(working copy)
@@ -1028,11 +1028,14 @@
 ;; shift-count granularity. That's good enough for the middle-end's current
 ;; needs.
 
+;; Note that it's not safe to perform such an operation in big-endian mode,
+;; due to element-ordering issues.
+
 (define_expand "vec_shr_<mode>"
   [(match_operand:VDQ 0 "s_register_operand" "")
    (match_operand:VDQ 1 "s_register_operand" "")
    (match_operand:SI 2 "const_multiple_of_8_operand" "")]
-  "TARGET_NEON"
+  "TARGET_NEON && !BYTES_BIG_ENDIAN"
 {
   rtx zero_reg;
   HOST_WIDE_INT num_bits = INTVAL (operands[2]);
@@ -1060,7 +1063,7 @@
   [(match_operand:VDQ 0 "s_register_operand" "")
    (match_operand:VDQ 1 "s_register_operand" "")
    (match_operand:SI 2 "const_multiple_of_8_operand" "")]
-  "TARGET_NEON"
+  "TARGET_NEON && !BYTES_BIG_ENDIAN"
 {
   rtx zero_reg;
   HOST_WIDE_INT num_bits = INTVAL (operands[2]);
@@ -1256,7 +1259,8 @@
 (define_expand "reduc_splus_<mode>"
   [(match_operand:VQ 0 "s_register_operand" "")
    (match_operand:VQ 1 "s_register_operand" "")]
-  "TARGET_NEON && (!<Is_float_mode> || flag_unsafe_math_optimizations)"
+  "TARGET_NEON && (!<Is_float_mode> || flag_unsafe_math_optimizations)
+   && !BYTES_BIG_ENDIAN"
 {
   rtx step1 = gen_reg_rtx (<V_HALF>mode);
   rtx res_d = gen_reg_rtx (<V_HALF>mode);
@@ -1272,7 +1276,7 @@
   [(set (match_operand:V2DI 0 "s_register_operand" "=w")
 	(unspec:V2DI [(match_operand:V2DI 1 "s_register_operand" "w")]
 		     UNSPEC_VPADD))]
-  "TARGET_NEON"
+  "TARGET_NEON && !BYTES_BIG_ENDIAN"
   "vadd.i64\t%e0, %e1, %f1"
   [(set_attr "neon_type" "neon_int_1")]
 )
@@ -1282,7 +1286,7 @@
 (define_expand "reduc_uplus_<mode>"
   [(match_operand:VDQI 0 "s_register_operand" "")
    (match_operand:VDQI 1 "s_register_operand" "")]
-  "TARGET_NEON"
+  "TARGET_NEON && (<Is_d_reg> || !BYTES_BIG_ENDIAN)"
 {
   emit_insn (gen_reduc_splus_<mode> (operands[0], operands[1]));
   DONE;
@@ -1301,7 +1305,8 @@
 (define_expand "reduc_smin_<mode>"
   [(match_operand:VQ 0 "s_register_operand" "")
    (match_operand:VQ 1 "s_register_operand" "")]
-  "TARGET_NEON && (!<Is_float_mode> || flag_unsafe_math_optimizations)"
+  "TARGET_NEON && (!<Is_float_mode> || flag_unsafe_math_optimizations)
+   && !BYTES_BIG_ENDIAN"
 {
   rtx step1 = gen_reg_rtx (<V_HALF>mode);
   rtx res_d = gen_reg_rtx (<V_HALF>mode);
@@ -1326,7 +1331,8 @@
 (define_expand "reduc_smax_<mode>"
   [(match_operand:VQ 0 "s_register_operand" "")
    (match_operand:VQ 1 "s_register_operand" "")]
-  "TARGET_NEON && (!<Is_float_mode> || flag_unsafe_math_optimizations)"
+  "TARGET_NEON && (!<Is_float_mode> || flag_unsafe_math_optimizations)
+   && !BYTES_BIG_ENDIAN"
 {
   rtx step1 = gen_reg_rtx (<V_HALF>mode);
   rtx res_d = gen_reg_rtx (<V_HALF>mode);
@@ -1351,7 +1357,7 @@
 (define_expand "reduc_umin_<mode>"
   [(match_operand:VQI 0 "s_register_operand" "")
    (match_operand:VQI 1 "s_register_operand" "")]
-  "TARGET_NEON"
+  "TARGET_NEON && !BYTES_BIG_ENDIAN"
 {
   rtx step1 = gen_reg_rtx (<V_HALF>mode);
   rtx res_d = gen_reg_rtx (<V_HALF>mode);
@@ -1376,7 +1382,7 @@
 (define_expand "reduc_umax_<mode>"
   [(match_operand:VQI 0 "s_register_operand" "")
    (match_operand:VQI 1 "s_register_operand" "")]
-  "TARGET_NEON"
+  "TARGET_NEON && !BYTES_BIG_ENDIAN"
 {
   rtx step1 = gen_reg_rtx (<V_HALF>mode);
   rtx res_d = gen_reg_rtx (<V_HALF>mode);
@@ -5238,7 +5244,7 @@
         (SE:<V_unpack> (vec_select:<V_HALF>
 			  (match_operand:VU 1 "register_operand" "w")
 			  (match_operand:VU 2 "vect_par_constant_low" ""))))]
-  "TARGET_NEON"
+  "TARGET_NEON && !BYTES_BIG_ENDIAN"
   "vmovl.<US><V_sz_elem> %q0, %e1"
   [(set_attr "neon_type" "neon_shift_1")]
 )
@@ -5248,7 +5254,7 @@
         (SE:<V_unpack> (vec_select:<V_HALF>
 			  (match_operand:VU 1 "register_operand" "w")
 			  (match_operand:VU 2 "vect_par_constant_high" ""))))]
-  "TARGET_NEON"
+  "TARGET_NEON && !BYTES_BIG_ENDIAN"
   "vmovl.<US><V_sz_elem> %q0, %f1"
   [(set_attr "neon_type" "neon_shift_1")]
 )
@@ -5256,7 +5262,7 @@
 (define_expand "vec_unpack<US>_hi_<mode>"
   [(match_operand:<V_unpack> 0 "register_operand" "")
    (SE:<V_unpack> (match_operand:VU 1 "register_operand"))]
- "TARGET_NEON"
+ "TARGET_NEON && !BYTES_BIG_ENDIAN"
   {
    rtvec v = rtvec_alloc (<V_mode_nunits>/2)  ;
    rtx t1;
@@ -5275,7 +5281,7 @@
 (define_expand "vec_unpack<US>_lo_<mode>"
   [(match_operand:<V_unpack> 0 "register_operand" "")
    (SE:<V_unpack> (match_operand:VU 1 "register_operand" ""))]
- "TARGET_NEON"
+ "TARGET_NEON && !BYTES_BIG_ENDIAN"
   {
    rtvec v = rtvec_alloc (<V_mode_nunits>/2)  ;
    rtx t1;
@@ -5298,7 +5304,7 @@
  		        (SE:<V_unpack> (vec_select:<V_HALF>
                            (match_operand:VU 3 "register_operand" "w") 
                            (match_dup 2)))))]
-  "TARGET_NEON"
+  "TARGET_NEON && !BYTES_BIG_ENDIAN"
   "vmull.<US><V_sz_elem> %q0, %e1, %e3"
   [(set_attr "neon_type" "neon_shift_1")]
 )
@@ -5307,7 +5313,7 @@
   [(match_operand:<V_unpack> 0 "register_operand" "")
    (SE:<V_unpack> (match_operand:VU 1 "register_operand" ""))
    (SE:<V_unpack> (match_operand:VU 2 "register_operand" ""))]
- "TARGET_NEON"
+ "TARGET_NEON && !BYTES_BIG_ENDIAN"
  {
    rtvec v = rtvec_alloc (<V_mode_nunits>/2)  ;
    rtx t1;
@@ -5332,7 +5338,7 @@
 		       (SE:<V_unpack> (vec_select:<V_HALF>
 			    (match_operand:VU 3 "register_operand" "w") 
 			    (match_dup 2)))))]
-  "TARGET_NEON"
+  "TARGET_NEON && !BYTES_BIG_ENDIAN"
   "vmull.<US><V_sz_elem> %q0, %f1, %f3"
   [(set_attr "neon_type" "neon_shift_1")]
 )
@@ -5341,7 +5347,7 @@
   [(match_operand:<V_unpack> 0 "register_operand" "")
    (SE:<V_unpack> (match_operand:VU 1 "register_operand" ""))
    (SE:<V_unpack> (match_operand:VU 2 "register_operand" ""))]
- "TARGET_NEON"
+ "TARGET_NEON && !BYTES_BIG_ENDIAN"
  {
    rtvec v = rtvec_alloc (<V_mode_nunits>/2)  ;
    rtx t1;
@@ -5435,6 +5441,10 @@
  }
 )
 
+; FIXME: These instruction patterns can't be used safely in big-endian mode
+; because the ordering of vector elements in Q registers is different from what
+; the semantics of the instructions require.
+
 (define_insn "vec_pack_trunc_<mode>"
  [(set (match_operand:<V_narrow_pack> 0 "register_operand" "=&w")
        (vec_concat:<V_narrow_pack> 
@@ -5442,7 +5452,7 @@
 			(match_operand:VN 1 "register_operand" "w"))
 		(truncate:<V_narrow>
 			(match_operand:VN 2 "register_operand" "w"))))]
- "TARGET_NEON"
+ "TARGET_NEON && !BYTES_BIG_ENDIAN"
  "vmovn.i<V_sz_elem>\t%e0, %q1\n\tvmovn.i<V_sz_elem>\t%f0, %q2"
  [(set_attr "neon_type" "neon_shift_1")]
 )
@@ -5451,7 +5461,7 @@
 (define_insn "neon_vec_pack_trunc_<mode>"
  [(set (match_operand:<V_narrow> 0 "register_operand" "=w")
        (truncate:<V_narrow> (match_operand:VN 1 "register_operand" "w")))]
- "TARGET_NEON"
+ "TARGET_NEON && !BYTES_BIG_ENDIAN"
  "vmovn.i<V_sz_elem>\t%P0, %q1"
  [(set_attr "neon_type" "neon_shift_1")]
 )
@@ -5460,7 +5470,7 @@
  [(match_operand:<V_narrow_pack> 0 "register_operand" "")
   (match_operand:VSHFT 1 "register_operand" "")
   (match_operand:VSHFT 2 "register_operand")]
- "TARGET_NEON"
+ "TARGET_NEON && !BYTES_BIG_ENDIAN"
 {
   rtx tempreg = gen_reg_rtx (<V_DOUBLE>mode);
   

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]