[patch] doc/*.texi: Fix typos.

[kazu at codesourcery dot com (Kazu Hirata)]

Hi,

Built x86_64-pc-linux-gnu.  Committed as obvious.

Kazu Hirata

2009-01-18  Kazu Hirata  <kazu@codesourcery.com>

	* doc/extend.texi, doc/gimple.texi, doc/invoke.texi,
	doc/md.texi, doc/sourcebuild.texi, doc/tm.texi: Fix typos.
	Follow spelling conventions.

Index: gcc/doc/extend.texi
===================================================================
--- gcc/doc/extend.texi	(revision 143471)
+++ gcc/doc/extend.texi	(working copy)
@@ -2782,7 +2782,7 @@ with modern codes that keep a 16-byte st
 @cindex @code{resbank} attribute
 On the SH2A target, this attribute enables the high-speed register
 saving and restoration using a register bank for @code{interrupt_handler}
-routines.  Saving to the bank is performed automatcially after the CPU
+routines.  Saving to the bank is performed automatically after the CPU
 accepts an interrupt that uses a register bank.
 
 The nineteen 32-bit registers comprising general register R0 to R14,
Index: gcc/doc/gimple.texi
===================================================================
--- gcc/doc/gimple.texi	(revision 143471)
+++ gcc/doc/gimple.texi	(working copy)
@@ -109,7 +109,7 @@ structure takes 4 words (32 bytes) on 64
 @item @code{visited}			@tab 1
 @item @code{nontemporal_move}		@tab 1
 @item @code{plf}			@tab 2
-@item @code{modifed}			@tab 1
+@item @code{modified}			@tab 1
 @item @code{has_volatile_ops}		@tab 1
 @item @code{references_memory_p}	@tab 1
 @item @code{uid}			@tab 32
Index: gcc/doc/invoke.texi
===================================================================
--- gcc/doc/invoke.texi	(revision 143471)
+++ gcc/doc/invoke.texi	(working copy)
@@ -1387,14 +1387,14 @@ is currently only supported when compili
 
 The compiler can accept several base standards, such as @samp{c89} or
 @samp{c++98}, and GNU dialects of those standards, such as
-@samp{gnu89} or @samp{gnu++98}.  By specifing a base standard, the
+@samp{gnu89} or @samp{gnu++98}.  By specifying a base standard, the
 compiler will accept all programs following that standard and those
 using GNU extensions that do not contradict it.  For example,
 @samp{-std=c89} turns off certain features of GCC that are
 incompatible with ISO C90, such as the @code{asm} and @code{typeof}
 keywords, but not other GNU extensions that do not have a meaning in
 ISO C90, such as omitting the middle term of a @code{?:}
-expression. On the other hand, by specifing a GNU dialect of a
+expression. On the other hand, by specifying a GNU dialect of a
 standard, all features the compiler support are enabled, even when
 those features change the meaning of the base standard and some
 strict-conforming programs may be rejected.  The particular standard
@@ -6605,7 +6605,7 @@ compiling and when linking your program.
 The following options are enabled: @code{-fprofile-arcs}, @code{-fprofile-values}, @code{-fvpt}.
 
 If @var{path} is specified, GCC will look at the @var{path} to find
-the profile feeedback data files. See @option{-fprofile-dir}.
+the profile feedback data files. See @option{-fprofile-dir}.
 
 @item -fprofile-use
 @itemx -fprofile-use=@var{path}
@@ -7601,8 +7601,8 @@ optimizing at @option{-O3} and above.  F
 the enhanced partial redundancy elimination optimization can run away,
 consuming all of the memory available on the host machine.  This
 parameter sets a limit on the length of the sets that are computed,
-which prevents the runaway behaviour.  Setting a value of 0 for
-this paramter will allow an unlimited set length.
+which prevents the runaway behavior.  Setting a value of 0 for
+this parameter will allow an unlimited set length.
 
 @item sccvn-max-scc-size
 Maximum size of a strongly connected component (SCC) during SCCVN
@@ -9077,7 +9077,7 @@ best available method for the selected p
 Only generate absolute relocations on word sized values (i.e. R_ARM_ABS32).
 This is enabled by default on targets (uClinux, SymbianOS) where the runtime
 loader imposes this restriction, and when @option{-fpic} or @option{-fPIC}
-is speficied.
+is specified.
 
 @end table
 
@@ -13317,7 +13317,7 @@ Disables warnings about the generation o
 warnings can be generated, for example, when compiling code which
 performs byte-level memory operations on the MAC AE type.  The MAC AE has
 no hardware support for byte-level memory operations, so all byte
-load/stores must be synthesised from word load/store operations.  This is
+load/stores must be synthesized from word load/store operations.  This is
 inefficient and a warning will be generated indicating to the programmer
 that they should rewrite the code to avoid byte operations, or to target
 an AE type which has the necessary hardware support.  This option enables
Index: gcc/doc/md.texi
===================================================================
--- gcc/doc/md.texi	(revision 143471)
+++ gcc/doc/md.texi	(working copy)
@@ -3149,7 +3149,7 @@ A definition of another insn attribute u
 reason an insn alternative might be available or
 not.  E.g. @code{cpu_facility} as in the example below.
 @item
-An assignement for the second attribute to each insn definition
+An assignment for the second attribute to each insn definition
 combining instructions which are not all available under the same
 circumstances.  (Note: It obviously only makes sense for definitions
 with more than one alternative.  Otherwise the insn pattern should be
Index: gcc/doc/sourcebuild.texi
===================================================================
--- gcc/doc/sourcebuild.texi	(revision 143471)
+++ gcc/doc/sourcebuild.texi	(working copy)
@@ -1575,7 +1575,7 @@ Finalize use of torture lists.
 @end table
 
 The @file{.exp} file for a set of tests that use torture options must
-include calls to these three procecures if:
+include calls to these three procedures if:
 
 @itemize @bullet
 @item It calls @code{gcc-dg-runtest} and overrides @var{DG_TORTURE_OPTIONS}.
Index: gcc/doc/tm.texi
===================================================================
--- gcc/doc/tm.texi	(revision 143471)
+++ gcc/doc/tm.texi	(working copy)
@@ -6386,7 +6386,7 @@ Return a pointer to a store large enough
 @deftypefn {Target Hook} void TARGET_SCHED_INIT_SCHED_CONTEXT (void *@var{tc}, bool @var{clean_p})
 Initialize store pointed to by @var{tc} to hold target scheduling context.
 It @var{clean_p} is true then initialize @var{tc} as if scheduler is at the
-beginning of the block.  Overwise, make a copy of the current context in
+beginning of the block.  Otherwise, make a copy of the current context in
 @var{tc}.
 @end deftypefn
 
@@ -6409,7 +6409,7 @@ Return a pointer to a store large enough
 @deftypefn {Target Hook} void TARGET_SCHED_INIT_SCHED_CONTEXT (void *@var{tc}, bool @var{clean_p})
 Initialize store pointed to by @var{tc} to hold target scheduling context.
 It @var{clean_p} is true then initialize @var{tc} as if scheduler is at the
-beginning of the block.  Overwise, make a copy of the current context in
+beginning of the block.  Otherwise, make a copy of the current context in
 @var{tc}.
 @end deftypefn
 
@@ -9365,7 +9365,7 @@ For targets whose psABI does not provide
 specific relocations and instruction sequences, an emulation layer is
 used.  A set of target hooks allows this emulation layer to be
 configured for the requirements of a particular target.  For instance
-the psABI may infact specify TLS support in terms of an emulation
+the psABI may in fact specify TLS support in terms of an emulation
 layer.
 
 The emulation layer works by creating a control object for every TLS