This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
Re: Changing the treatment of the MIPS HI and LO registers
- From: Richard Sandiford <rdsandiford at googlemail dot com>
- To: "Maciej W. Rozycki" <macro at linux-mips dot org>
- Cc: Ralf Baechle <ralf at linux-mips dot org>, gcc-patches at gcc dot gnu dot org, linux-mips at linux-mips dot org
- Date: Mon, 09 Jun 2008 22:13:28 +0100
- Subject: Re: Changing the treatment of the MIPS HI and LO registers
- References: <87tzgj4nh6.fsf@firetop.home> <Pine.LNX.4.55.0805272134540.18833@cliff.in.clinika.pl> <87abib4d9t.fsf@firetop.home> <Pine.LNX.4.55.0805272357020.18833@cliff.in.clinika.pl> <87r6bm1ebd.fsf@firetop.home> <Pine.LNX.4.55.0805290213140.29522@cliff.in.clinika.pl> <878wxtvarg.fsf@firetop.home> <8763stz2p3.fsf@firetop.home>
Richard Sandiford <rdsandiford@googlemail.com> writes:
> I'll reinstate the 48 hour warning, mostly as a way of seeing
> whether the thread is still alive.
Here's the final version of the patch. I fixed the <su>mulsi3_highpart
condition and added a couple of missing attributes. Applied after retesting.
I also made the following changes to the web page:
Index: htdocs/gcc-4.4/changes.html
===================================================================
RCS file: /cvs/gcc/wwwdocs/htdocs/gcc-4.4/changes.html,v
retrieving revision 1.11
diff -u -p -r1.11 changes.html
--- htdocs/gcc-4.4/changes.html 9 Jun 2008 20:41:49 -0000 1.11
+++ htdocs/gcc-4.4/changes.html 9 Jun 2008 21:10:25 -0000
@@ -28,6 +28,28 @@
when <code>-Wdeprecated</code> or <code>-pedantic</code> is used.
This extension has been deprecated for many years, but never
warned about.</li>
+
+ <li>The MIPS port no longer recognizes the <code>h</code>
+ <code>asm</code> constraint. It was necessary to remove
+ this constraint in order to avoid generating unpredictable
+ code sequences.
+
+ <p>One of the main uses of the <code>h</code> constraint
+ was to extract the high part of a multiplication on
+ 64-bit targets. For example:</p>
+ <pre>
+ asm ("dmultu\t%1,%2" : "=h" (result) : "r" (x), "r" (y));</pre>
+ <p>You can now achieve the same effect using 128-bit types:</p>
+ <pre>
+ typedef unsigned int uint128_t __attribute__((mode(TI)));
+ result = ((uint128_t) x * y) >> 64;</pre>
+ <p>The second sequence is better in many ways. For example,
+ if <code>x</code> and <code>y</code> are constants, the
+ compiler can perform the multiplication at compile time.
+ If <code>x</code> and <code>y</code> are not constants,
+ the compiler can schedule the runtime multiplication
+ better than it can schedule an <code>asm</code> statement.</p>
+ </li>
</ul>
<h2>General Optimizer Improvements</h2>
@@ -75,6 +97,8 @@
<ul>
<li>Support for RMI's XLR processor is now available through the
<code>-march=xlr</code> and <code>-mtune=xlr</code> options.</li>
+ <li>64-bit targets can now perform 128-bit multiplications inline,
+ instead of relying on a <code>libgcc</code> function.</li>
</ul>
<h2>Documentation improvements</h2>
Please shout if you find anything wrong with either the patch or
the documentation changes.
Richard
gcc/
* doc/md.texi: Synchronize with later constraints.md change.
* longlong.h (umul_ppmm): Replace the MIPS asm implementation
with a C implementation.
* config/mips/mips.c (mips_legitimize_move): Remove MFHI and
MFLO handling.
(mips_subword): Assume TImode for CONST_INTs if TARGET_64BIT.
(mips_split_doubleword_move): Use special MTHI and MFHI instructions
when moving to and from MD_REGNUM.
(mips_output_move): Don't handle moves from GPRs to HI_REGNUM.
Handle moves from LO_REGNUM to GPRs using MFLO, MACC or DMACC.
Handle byte and halfword moves.
(mips_hard_regno_mode_ok_p): Handle MD_REGS and DSP_ACC_REGS
separately.
* config/mips/constraints.md (h): Turn into NO_REGS.
(l, x): Update documentation.
* config/mips/mips.md (UNSPEC_MFHILO): Delete.
(UNSPEC_MFHI, UNSPEC_MTHI, UNSPEC_SET_HILO): New.
(UNSPEC_TLS_LDM, UNSPEC_TLS_GET_TP): Renumber.
(HILO): New mode iterator.
(MOVE128): Add TI.
(any_div): New code iterator.
(u): Extend code attribute to div and udiv.
(*add<mode>3_mips16, *movdi_64bit_mips16, *movsi_mips16): Use
d_operand in the splitters. Remove redundant CONST_INT checks.
(mulsi3_mult3, mul<mode>3_internal, mul<mode>3_r4000, *mul_acc_si)
(*macc, *msac, *msac_using_macc, *macc2, *msac2, *mul_sub_si)
(*muls): Remove "=h" clobbers. Adjust peephole2s and define_splits
accordingly, using normal moves instead of unspecs to move LO into
a GPR. Use d_operand and lo_operand instead of *_REG_P checks.
(<u>mulsidi3): Handle expansion in C code.
(<u>mulsidi3_32bit_internal): Rename to...
(<u>mulsidi3_32bit): ...this.
(<u>mulsidi3_32bit_r4000): Fix insn separator.
(*<u>mulsidi3_64bit): Rename to...
(<u>mulsidi3_64bit): ...this. Combine DImode "=h" and "=l" clobbers
into a TImode "=x" clobber. In the split, use an UNSPEC_SET_HILO
to set LO and HI to the multiplication result. Use a normal move
for MFLO and an unspec for MFHI.
(*<u>mulsidi3_64bit_parts): Replace with...
(<u>mulsidi3_64bit_hilo): ...this new instruction.
(<su>mulsi3_highpart): Extend to TARGET_FIX_R4000.
(<su>mulsi3_highpart_internal): Turn into a define_insn_and_split
and extend it to TARGET_FIX_R4000. Store the destination in a GPR
instead of HI. Split the instruction into a separate multiplication
and MFHI if !TARGET_FIX_R4000.
(<su>muldi3_highpart): Likewise.
(<su>mulsi3_highpart_mulhi_internal): Remove the first alternative
and the "=h" clobber.
(*<su>mulsi3_highpart_neg_mulhi_internal): Likewise.
(<u>mulditi3): New expander.
(<u>mulditi3_internal, <u>mulditi3_r4000): New patterns.
(madsi): Remove "=h" clobber.
(divmod<mode>4, udivmod<mode>4): Turn into define_insn_and_splits.
Force the modulus result to be a GPR and split the instruction into
a division followed by an MFHI after reload.
(<u>divmod<GPR:mode>4_hilo_<HILO:mode>): New instruction.
(*lea_high64): Use d_operand in the define_peephole2. Likewise
the MIPS16 HIGH define_split.
(*movdi_32bit, *movdi_gp32_fp64, *movdi_32bit_mips16): Change type
of acc<->gpr moves to "multi".
(*movdi_64bit): Replace the single "x" alternative with
alternatives for moving into and out of "a".
(*movhi_internal, *movqi_internal): Likewise. Use mips_output_move.
(*movsi_internal): Extend the "d<-A" alternative to "d<-a".
(*movdi_64bit_mips16, *movsi_mips16): Add d<-a alternatives.
Use d_operand in the splitters. Remove redundant CONST_INT checks.
(*movhi_mips16, *movqi_mips16): Likewise. Use mips_output_move.
(movti): New expander.
(*movti, *movti_mips16): New insns.
(mfhilo_<mode>, *mfhilo_<mode>, *mfhilo_<mode>_macc): Delete.
(mfhi<GPR:mode>_<HILO:mode>): New pattern.
(mthi<GPR:mode>_<HILO:mode>): Likewise.
* config/mips/predicates.md (fpr_operand): Delete.
(d_operand): New predicate.
gcc/testsuite/
* gcc.dg/torture/mips-hilo-1.c: Delete.
* gcc.target/mips/pr35232.c: Likewise.
* gcc.target/mips/fix-vr4130-1.c: Use modulus to create an mfhi.
* gcc.target/mips/fix-vr4130-3.c: Likewise.
* gcc.target/mips/int-moves-1.c: New test.
* gcc.target/mips/int-moves-2.c: Likewise.
* gcc.target/mips/fix-r4000-1.c: Likewise.
* gcc.target/mips/fix-r4000-2.c: Likewise.
* gcc.target/mips/fix-r4000-3.c: Likewise.
* gcc.target/mips/fix-r4000-4.c: Likewise.
* gcc.target/mips/fix-r4000-5.c: Likewise.
* gcc.target/mips/fix-r4000-6.c: Likewise.
* gcc.target/mips/fix-r4000-7.c: Likewise.
* gcc.target/mips/fix-r4000-8.c: Likewise.
* gcc.target/mips/fix-r4000-9.c: Likewise.
* gcc.target/mips/fix-r4000-10.c: Likewise.
* gcc.target/mips/fix-r4000-11.c: Likewise.
* gcc.target/mips/fix-r4000-12.c: Likewise.
* gcc.target/mips/timode-1.c: Likewise.
* gcc.target/mips/timode-2.c: Likewise.
Index: gcc/doc/md.texi
===================================================================
--- gcc/doc/md.texi 2008-06-09 21:42:44.000000000 +0100
+++ gcc/doc/md.texi 2008-06-09 21:45:18.000000000 +0100
@@ -2469,13 +2469,15 @@ generating MIPS16 code.
A floating-point register (if available).
@item h
-The @code{hi} register.
+Formerly the @code{hi} register. This constraint is no longer supported.
@item l
-The @code{lo} register.
+The @code{lo} register. Use this register to store values that are
+no bigger than a word.
@item x
-The @code{hi} and @code{lo} registers.
+The concatenated @code{hi} and @code{lo} registers. Use this register
+to store doubleword values.
@item c
A register suitable for use in an indirect jump. This will always be
Index: gcc/longlong.h
===================================================================
--- gcc/longlong.h 2008-06-09 21:42:44.000000000 +0100
+++ gcc/longlong.h 2008-06-09 21:45:18.000000000 +0100
@@ -623,12 +623,12 @@ #define UDIV_TIME 150
#endif /* __m88000__ */
#if defined (__mips__) && W_TYPE_SIZE == 32
-#define umul_ppmm(w1, w0, u, v) \
- __asm__ ("multu %2,%3" \
- : "=l" ((USItype) (w0)), \
- "=h" ((USItype) (w1)) \
- : "d" ((USItype) (u)), \
- "d" ((USItype) (v)))
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ UDItype __x = (UDItype) (USItype) (u) * (USItype) (v); \
+ (w1) = (USItype) (__x >> 32); \
+ (w0) = (USItype) (__x); \
+ } while (0)
#define UMUL_TIME 10
#define UDIV_TIME 100
Index: gcc/config/mips/mips.c
===================================================================
--- gcc/config/mips/mips.c 2008-06-09 21:42:44.000000000 +0100
+++ gcc/config/mips/mips.c 2008-06-09 21:45:18.000000000 +0100
@@ -2675,23 +2675,6 @@ mips_legitimize_move (enum machine_mode
return true;
}
- /* Check for individual, fully-reloaded mflo and mfhi instructions. */
- if (GET_MODE_SIZE (mode) <= UNITS_PER_WORD
- && REG_P (src) && MD_REG_P (REGNO (src))
- && REG_P (dest) && GP_REG_P (REGNO (dest)))
- {
- int other_regno = REGNO (src) == HI_REGNUM ? LO_REGNUM : HI_REGNUM;
- if (GET_MODE_SIZE (mode) <= 4)
- emit_insn (gen_mfhilo_si (gen_lowpart (SImode, dest),
- gen_lowpart (SImode, src),
- gen_rtx_REG (SImode, other_regno)));
- else
- emit_insn (gen_mfhilo_di (gen_lowpart (DImode, dest),
- gen_lowpart (DImode, src),
- gen_rtx_REG (DImode, other_regno)));
- return true;
- }
-
/* We need to deal with constants that would be legitimate
immediate_operands but aren't legitimate move_operands. */
if (CONSTANT_P (src) && !move_operand (src, mode))
@@ -3488,7 +3471,7 @@ mips_subword (rtx op, bool high_p)
mode = GET_MODE (op);
if (mode == VOIDmode)
- mode = DImode;
+ mode = TARGET_64BIT ? TImode : DImode;
if (TARGET_BIG_ENDIAN ? !high_p : high_p)
byte = UNITS_PER_WORD;
@@ -3539,6 +3522,8 @@ mips_split_64bit_move_p (rtx dest, rtx s
void
mips_split_doubleword_move (rtx dest, rtx src)
{
+ rtx low_dest;
+
if (FP_REG_RTX_P (dest) || FP_REG_RTX_P (src))
{
if (!TARGET_64BIT && GET_MODE (dest) == DImode)
@@ -3552,12 +3537,27 @@ mips_split_doubleword_move (rtx dest, rt
else
gcc_unreachable ();
}
+ else if (REG_P (dest) && REGNO (dest) == MD_REG_FIRST)
+ {
+ low_dest = mips_subword (dest, false);
+ mips_emit_move (low_dest, mips_subword (src, false));
+ if (TARGET_64BIT)
+ emit_insn (gen_mthidi_ti (dest, mips_subword (src, true), low_dest));
+ else
+ emit_insn (gen_mthisi_di (dest, mips_subword (src, true), low_dest));
+ }
+ else if (REG_P (src) && REGNO (src) == MD_REG_FIRST)
+ {
+ mips_emit_move (mips_subword (dest, false), mips_subword (src, false));
+ if (TARGET_64BIT)
+ emit_insn (gen_mfhidi_ti (mips_subword (dest, true), src));
+ else
+ emit_insn (gen_mfhisi_di (mips_subword (dest, true), src));
+ }
else
{
/* The operation can be split into two normal moves. Decide in
which order to do them. */
- rtx low_dest;
-
low_dest = mips_subword (dest, false);
if (REG_P (low_dest)
&& reg_overlap_mentioned_p (low_dest, src))
@@ -3600,8 +3600,9 @@ mips_output_move (rtx dest, rtx src)
if (GP_REG_P (REGNO (dest)))
return "move\t%0,%z1";
- if (MD_REG_P (REGNO (dest)))
- return "mt%0\t%z1";
+ /* Moves to HI are handled by special .md insns. */
+ if (REGNO (dest) == LO_REGNUM)
+ return "mtlo\t%z1";
if (DSP_ACC_REG_P (REGNO (dest)))
{
@@ -3624,14 +3625,29 @@ mips_output_move (rtx dest, rtx src)
}
}
if (dest_code == MEM)
- return dbl_p ? "sd\t%z1,%0" : "sw\t%z1,%0";
+ switch (GET_MODE_SIZE (mode))
+ {
+ case 1: return "sb\t%z1,%0";
+ case 2: return "sh\t%z1,%0";
+ case 4: return "sw\t%z1,%0";
+ case 8: return "sd\t%z1,%0";
+ }
}
if (dest_code == REG && GP_REG_P (REGNO (dest)))
{
if (src_code == REG)
{
- /* Handled by separate patterns. */
- gcc_assert (!MD_REG_P (REGNO (src)));
+ /* Moves from HI are handled by special .md insns. */
+ if (REGNO (src) == LO_REGNUM)
+ {
+ /* When generating VR4120 or VR4130 code, we use MACC and
+ DMACC instead of MFLO. This avoids both the normal
+ MIPS III HI/LO hazards and the errata related to
+ -mfix-vr4130. */
+ if (ISA_HAS_MACCHI)
+ return dbl_p ? "dmacc\t%0,%.,%." : "macc\t%0,%.,%.";
+ return "mflo\t%0";
+ }
if (DSP_ACC_REG_P (REGNO (src)))
{
@@ -3658,7 +3674,13 @@ mips_output_move (rtx dest, rtx src)
}
if (src_code == MEM)
- return dbl_p ? "ld\t%0,%1" : "lw\t%0,%1";
+ switch (GET_MODE_SIZE (mode))
+ {
+ case 1: return "lbu\t%0,%1";
+ case 2: return "lhu\t%0,%1";
+ case 4: return "lw\t%0,%1";
+ case 8: return "ld\t%0,%1";
+ }
if (src_code == CONST_INT)
{
@@ -8954,13 +8976,30 @@ mips_hard_regno_mode_ok_p (unsigned int
if (ACC_REG_P (regno)
&& (INTEGRAL_MODE_P (mode) || ALL_FIXED_POINT_MODE_P (mode)))
{
- if (size <= UNITS_PER_WORD)
- return true;
+ if (MD_REG_P (regno))
+ {
+ /* After a multiplication or division, clobbering HI makes
+ the value of LO unpredictable, and vice versa. This means
+ that, for all interesting cases, HI and LO are effectively
+ a single register.
- if (size <= UNITS_PER_WORD * 2)
- return (DSP_ACC_REG_P (regno)
- ? ((regno - DSP_ACC_REG_FIRST) & 1) == 0
- : regno == MD_REG_FIRST);
+ We model this by requiring that any value that uses HI
+ also uses LO. */
+ if (size <= UNITS_PER_WORD * 2)
+ return regno == (size <= UNITS_PER_WORD ? LO_REGNUM : MD_REG_FIRST);
+ }
+ else
+ {
+ /* DSP accumulators do not have the same restrictions as
+ HI and LO, so we can treat them as normal doubleword
+ registers. */
+ if (size <= UNITS_PER_WORD)
+ return true;
+
+ if (size <= UNITS_PER_WORD * 2
+ && ((regno - DSP_ACC_REG_FIRST) & 1) == 0)
+ return true;
+ }
}
if (ALL_COP_REG_P (regno))
Index: gcc/config/mips/constraints.md
===================================================================
--- gcc/config/mips/constraints.md 2008-06-09 21:42:44.000000000 +0100
+++ gcc/config/mips/constraints.md 2008-06-09 21:45:18.000000000 +0100
@@ -29,14 +29,16 @@ (define_register_constraint "t" "T_REG"
(define_register_constraint "f" "TARGET_HARD_FLOAT ? FP_REGS : NO_REGS"
"A floating-point register (if available).")
-(define_register_constraint "h" "TARGET_BIG_ENDIAN ? MD0_REG : MD1_REG"
- "The @code{hi} register.")
+(define_register_constraint "h" "NO_REGS"
+ "Formerly the @code{hi} register. This constraint is no longer supported.")
(define_register_constraint "l" "TARGET_BIG_ENDIAN ? MD1_REG : MD0_REG"
- "The @code{lo} register.")
+ "The @code{lo} register. Use this register to store values that are
+ no bigger than a word.")
(define_register_constraint "x" "MD_REGS"
- "The @code{hi} and @code{lo} registers.")
+ "The concatenated @code{hi} and @code{lo} registers. Use this register
+ to store doubleword values.")
(define_register_constraint "b" "ALL_REGS"
"@internal")
Index: gcc/config/mips/mips.md
===================================================================
--- gcc/config/mips/mips.md 2008-06-09 21:42:44.000000000 +0100
+++ gcc/config/mips/mips.md 2008-06-09 21:45:18.000000000 +0100
@@ -44,9 +44,11 @@ (define_constants
(UNSPEC_LOAD_CALL 23)
(UNSPEC_LOAD_GOT 24)
(UNSPEC_GP 25)
- (UNSPEC_MFHILO 26)
- (UNSPEC_TLS_LDM 27)
- (UNSPEC_TLS_GET_TP 28)
+ (UNSPEC_MFHI 26)
+ (UNSPEC_MTHI 27)
+ (UNSPEC_SET_HILO 28)
+ (UNSPEC_TLS_LDM 29)
+ (UNSPEC_TLS_GET_TP 30)
(UNSPEC_MFHC1 31)
(UNSPEC_MTHC1 32)
(UNSPEC_CLEAR_HAZARD 33)
@@ -484,6 +486,10 @@ (define_mode_iterator GPR [SI (DI "TARGE
;; modes.
(define_mode_iterator GPR2 [SI (DI "TARGET_64BIT")])
+;; This mode iterator allows :HILO to be used as the mode of the
+;; concatenated HI and LO registers.
+(define_mode_iterator HILO [(DI "!TARGET_64BIT") (TI "TARGET_64BIT")])
+
;; This mode iterator allows :P to be used for patterns that operate on
;; pointer-sized quantities. Exactly one of the two alternatives will match.
(define_mode_iterator P [(SI "Pmode == SImode") (DI "Pmode == DImode")])
@@ -497,7 +503,7 @@ (define_mode_iterator MOVE64
[DI DF (V2SF "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT")])
;; 128-bit modes for which we provide move patterns on 64-bit targets.
-(define_mode_iterator MOVE128 [TF])
+(define_mode_iterator MOVE128 [TI TF])
;; This mode iterator allows the QI and HI extension patterns to be
;; defined from the same template.
@@ -613,6 +619,10 @@ (define_code_iterator any_extend [sign_e
;; from the same template.
(define_code_iterator any_shift [ashift ashiftrt lshiftrt])
+;; This code iterator allows unsigned and signed division to be generated
+;; from the same template.
+(define_code_iterator any_div [div udiv])
+
;; This code iterator allows all native floating-point comparisons to be
;; generated from the same template.
(define_code_iterator fcond [unordered uneq unlt unle eq lt le])
@@ -631,6 +641,7 @@ (define_code_iterator any_le [le leu])
;; <u> expands to an empty string when doing a signed operation and
;; "u" when doing an unsigned operation.
(define_code_attr u [(sign_extend "") (zero_extend "u")
+ (div "") (udiv "u")
(gt "") (gtu "u")
(ge "") (geu "u")
(lt "") (ltu "u")
@@ -865,13 +876,10 @@ (define_insn "*add<mode>3_mips16"
;; simply adding a constant to a register.
(define_split
- [(set (match_operand:SI 0 "register_operand")
+ [(set (match_operand:SI 0 "d_operand")
(plus:SI (match_dup 0)
(match_operand:SI 1 "const_int_operand")))]
"TARGET_MIPS16 && reload_completed && !TARGET_DEBUG_D_MODE
- && REG_P (operands[0])
- && M16_REG_P (REGNO (operands[0]))
- && GET_CODE (operands[1]) == CONST_INT
&& ((INTVAL (operands[1]) > 0x7f
&& INTVAL (operands[1]) <= 0x7f + 0x7f)
|| (INTVAL (operands[1]) < - 0x80
@@ -894,16 +902,11 @@ (define_split
})
(define_split
- [(set (match_operand:SI 0 "register_operand")
- (plus:SI (match_operand:SI 1 "register_operand")
+ [(set (match_operand:SI 0 "d_operand")
+ (plus:SI (match_operand:SI 1 "d_operand")
(match_operand:SI 2 "const_int_operand")))]
"TARGET_MIPS16 && reload_completed && !TARGET_DEBUG_D_MODE
- && REG_P (operands[0])
- && M16_REG_P (REGNO (operands[0]))
- && REG_P (operands[1])
- && M16_REG_P (REGNO (operands[1]))
&& REGNO (operands[0]) != REGNO (operands[1])
- && GET_CODE (operands[2]) == CONST_INT
&& ((INTVAL (operands[2]) > 0x7
&& INTVAL (operands[2]) <= 0x7 + 0x7f)
|| (INTVAL (operands[2]) < - 0x8
@@ -926,13 +929,10 @@ (define_split
})
(define_split
- [(set (match_operand:DI 0 "register_operand")
+ [(set (match_operand:DI 0 "d_operand")
(plus:DI (match_dup 0)
(match_operand:DI 1 "const_int_operand")))]
"TARGET_MIPS16 && TARGET_64BIT && reload_completed && !TARGET_DEBUG_D_MODE
- && REG_P (operands[0])
- && M16_REG_P (REGNO (operands[0]))
- && GET_CODE (operands[1]) == CONST_INT
&& ((INTVAL (operands[1]) > 0xf
&& INTVAL (operands[1]) <= 0xf + 0xf)
|| (INTVAL (operands[1]) < - 0x10
@@ -955,16 +955,11 @@ (define_split
})
(define_split
- [(set (match_operand:DI 0 "register_operand")
- (plus:DI (match_operand:DI 1 "register_operand")
+ [(set (match_operand:DI 0 "d_operand")
+ (plus:DI (match_operand:DI 1 "d_operand")
(match_operand:DI 2 "const_int_operand")))]
"TARGET_MIPS16 && TARGET_64BIT && reload_completed && !TARGET_DEBUG_D_MODE
- && REG_P (operands[0])
- && M16_REG_P (REGNO (operands[0]))
- && REG_P (operands[1])
- && M16_REG_P (REGNO (operands[1]))
&& REGNO (operands[0]) != REGNO (operands[1])
- && GET_CODE (operands[2]) == CONST_INT
&& ((INTVAL (operands[2]) > 0x7
&& INTVAL (operands[2]) <= 0x7 + 0xf)
|| (INTVAL (operands[2]) < - 0x8
@@ -1175,8 +1170,7 @@ (define_insn "mulsi3_mult3"
[(set (match_operand:SI 0 "register_operand" "=d,l")
(mult:SI (match_operand:SI 1 "register_operand" "d,d")
(match_operand:SI 2 "register_operand" "d,d")))
- (clobber (match_scratch:SI 3 "=h,h"))
- (clobber (match_scratch:SI 4 "=l,X"))]
+ (clobber (match_scratch:SI 3 "=l,X"))]
"ISA_HAS_MUL3"
{
if (which_alternative == 1)
@@ -1195,30 +1189,26 @@ (define_insn "mulsi3_mult3"
;; Operand 0: LO
;; Operand 1: GPR (1st multiplication operand)
;; Operand 2: GPR (2nd multiplication operand)
-;; Operand 3: HI
-;; Operand 4: GPR (destination)
+;; Operand 3: GPR (destination)
(define_peephole2
[(parallel
- [(set (match_operand:SI 0 "register_operand")
- (mult:SI (match_operand:SI 1 "register_operand")
- (match_operand:SI 2 "register_operand")))
- (clobber (match_operand:SI 3 "register_operand"))
+ [(set (match_operand:SI 0 "lo_operand")
+ (mult:SI (match_operand:SI 1 "d_operand")
+ (match_operand:SI 2 "d_operand")))
(clobber (scratch:SI))])
- (set (match_operand:SI 4 "register_operand")
- (unspec [(match_dup 0) (match_dup 3)] UNSPEC_MFHILO))]
+ (set (match_operand:SI 3 "d_operand")
+ (match_dup 0))]
"ISA_HAS_MUL3 && peep2_reg_dead_p (2, operands[0])"
[(parallel
- [(set (match_dup 4)
+ [(set (match_dup 3)
(mult:SI (match_dup 1)
(match_dup 2)))
- (clobber (match_dup 3))
(clobber (match_dup 0))])])
(define_insn "mul<mode>3_internal"
[(set (match_operand:GPR 0 "register_operand" "=l")
(mult:GPR (match_operand:GPR 1 "register_operand" "d")
- (match_operand:GPR 2 "register_operand" "d")))
- (clobber (match_scratch:GPR 3 "=h"))]
+ (match_operand:GPR 2 "register_operand" "d")))]
"!TARGET_FIX_R4000"
"<d>mult\t%1,%2"
[(set_attr "type" "imul")
@@ -1228,8 +1218,7 @@ (define_insn "mul<mode>3_r4000"
[(set (match_operand:GPR 0 "register_operand" "=d")
(mult:GPR (match_operand:GPR 1 "register_operand" "d")
(match_operand:GPR 2 "register_operand" "d")))
- (clobber (match_scratch:GPR 3 "=h"))
- (clobber (match_scratch:GPR 4 "=l"))]
+ (clobber (match_scratch:GPR 3 "=l"))]
"TARGET_FIX_R4000"
"<d>mult\t%1,%2\;mflo\t%0"
[(set_attr "type" "imul")
@@ -1243,16 +1232,13 @@ (define_insn "mul<mode>3_r4000"
;; Operand 0: LO
;; Operand 1: GPR (1st multiplication operand)
;; Operand 2: GPR (2nd multiplication operand)
-;; Operand 3: HI
-;; Operand 4: GPR (destination)
+;; Operand 3: GPR (destination)
(define_peephole2
- [(parallel
- [(set (match_operand:SI 0 "register_operand")
- (mult:SI (match_operand:SI 1 "register_operand")
- (match_operand:SI 2 "register_operand")))
- (clobber (match_operand:SI 3 "register_operand"))])
- (set (match_operand:SI 4 "register_operand")
- (unspec:SI [(match_dup 0) (match_dup 3)] UNSPEC_MFHILO))]
+ [(set (match_operand:SI 0 "lo_operand")
+ (mult:SI (match_operand:SI 1 "d_operand")
+ (match_operand:SI 2 "d_operand")))
+ (set (match_operand:SI 3 "d_operand")
+ (match_dup 0))]
"ISA_HAS_MACC && !ISA_HAS_MUL3"
[(set (match_dup 0)
(const_int 0))
@@ -1261,11 +1247,10 @@ (define_peephole2
(plus:SI (mult:SI (match_dup 1)
(match_dup 2))
(match_dup 0)))
- (set (match_dup 4)
+ (set (match_dup 3)
(plus:SI (mult:SI (match_dup 1)
(match_dup 2))
- (match_dup 0)))
- (clobber (match_dup 3))])])
+ (match_dup 0)))])])
;; Multiply-accumulate patterns
@@ -1284,9 +1269,8 @@ (define_insn "*mul_acc_si"
(plus:SI (mult:SI (match_operand:SI 1 "register_operand" "d,d,d")
(match_operand:SI 2 "register_operand" "d,d,d"))
(match_operand:SI 3 "register_operand" "0,l,*d")))
- (clobber (match_scratch:SI 4 "=h,h,h"))
- (clobber (match_scratch:SI 5 "=X,3,l"))
- (clobber (match_scratch:SI 6 "=X,X,&d"))]
+ (clobber (match_scratch:SI 4 "=X,3,l"))
+ (clobber (match_scratch:SI 5 "=X,X,&d"))]
"(TARGET_MIPS3900
|| GENERATE_MADD_MSUB)
&& !TARGET_MIPS16"
@@ -1302,53 +1286,45 @@ (define_insn "*mul_acc_si"
(set_attr "mode" "SI")
(set_attr "length" "4,4,8")])
-;; Split the above insn if we failed to get LO allocated.
+;; Split *mul_acc_si if both the source and destination accumulator
+;; values are GPRs.
(define_split
- [(set (match_operand:SI 0 "register_operand")
- (plus:SI (mult:SI (match_operand:SI 1 "register_operand")
- (match_operand:SI 2 "register_operand"))
- (match_operand:SI 3 "register_operand")))
- (clobber (match_scratch:SI 4))
- (clobber (match_scratch:SI 5))
- (clobber (match_scratch:SI 6))]
- "reload_completed && !TARGET_DEBUG_D_MODE
- && GP_REG_P (true_regnum (operands[0]))
- && GP_REG_P (true_regnum (operands[3]))"
- [(parallel [(set (match_dup 6)
+ [(set (match_operand:SI 0 "d_operand")
+ (plus:SI (mult:SI (match_operand:SI 1 "d_operand")
+ (match_operand:SI 2 "d_operand"))
+ (match_operand:SI 3 "d_operand")))
+ (clobber (match_operand:SI 4 "lo_operand"))
+ (clobber (match_operand:SI 5 "d_operand"))]
+ "reload_completed && !TARGET_DEBUG_D_MODE"
+ [(parallel [(set (match_dup 5)
(mult:SI (match_dup 1) (match_dup 2)))
- (clobber (match_dup 4))
- (clobber (match_dup 5))])
- (set (match_dup 0) (plus:SI (match_dup 6) (match_dup 3)))]
+ (clobber (match_dup 4))])
+ (set (match_dup 0) (plus:SI (match_dup 5) (match_dup 3)))]
"")
-;; Splitter to copy result of MADD to a general register
+;; Split *mul_acc_si if the destination accumulator value is in a GPR
+;; and the source accumulator value is in LO.
(define_split
- [(set (match_operand:SI 0 "register_operand")
- (plus:SI (mult:SI (match_operand:SI 1 "register_operand")
- (match_operand:SI 2 "register_operand"))
- (match_operand:SI 3 "register_operand")))
- (clobber (match_scratch:SI 4))
- (clobber (match_scratch:SI 5))
- (clobber (match_scratch:SI 6))]
- "reload_completed && !TARGET_DEBUG_D_MODE
- && GP_REG_P (true_regnum (operands[0]))
- && true_regnum (operands[3]) == LO_REGNUM"
+ [(set (match_operand:SI 0 "d_operand")
+ (plus:SI (mult:SI (match_operand:SI 1 "d_operand")
+ (match_operand:SI 2 "d_operand"))
+ (match_operand:SI 3 "lo_operand")))
+ (clobber (match_dup 3))
+ (clobber (scratch:SI))]
+ "reload_completed && !TARGET_DEBUG_D_MODE"
[(parallel [(set (match_dup 3)
(plus:SI (mult:SI (match_dup 1) (match_dup 2))
(match_dup 3)))
- (clobber (match_dup 4))
- (clobber (match_dup 5))
- (clobber (match_dup 6))])
- (set (match_dup 0) (unspec:SI [(match_dup 5) (match_dup 4)] UNSPEC_MFHILO))]
- "")
+ (clobber (scratch:SI))
+ (clobber (scratch:SI))])
+ (set (match_dup 0) (match_dup 3))])
(define_insn "*macc"
[(set (match_operand:SI 0 "register_operand" "=l,d")
(plus:SI (mult:SI (match_operand:SI 1 "register_operand" "d,d")
(match_operand:SI 2 "register_operand" "d,d"))
(match_operand:SI 3 "register_operand" "0,l")))
- (clobber (match_scratch:SI 4 "=h,h"))
- (clobber (match_scratch:SI 5 "=X,3"))]
+ (clobber (match_scratch:SI 4 "=X,3"))]
"ISA_HAS_MACC"
{
if (which_alternative == 1)
@@ -1369,8 +1345,7 @@ (define_insn "*msac"
(minus:SI (match_operand:SI 1 "register_operand" "0,l")
(mult:SI (match_operand:SI 2 "register_operand" "d,d")
(match_operand:SI 3 "register_operand" "d,d"))))
- (clobber (match_scratch:SI 4 "=h,h"))
- (clobber (match_scratch:SI 5 "=X,1"))]
+ (clobber (match_scratch:SI 4 "=X,1"))]
"ISA_HAS_MSAC"
{
if (which_alternative == 1)
@@ -1389,21 +1364,19 @@ (define_insn_and_split "*msac_using_macc
(minus:SI (match_operand:SI 1 "register_operand" "0,l")
(mult:SI (match_operand:SI 2 "register_operand" "d,d")
(match_operand:SI 3 "register_operand" "d,d"))))
- (clobber (match_scratch:SI 4 "=h,h"))
- (clobber (match_scratch:SI 5 "=X,1"))
- (clobber (match_scratch:SI 6 "=d,d"))]
+ (clobber (match_scratch:SI 4 "=X,1"))
+ (clobber (match_scratch:SI 5 "=d,d"))]
"ISA_HAS_MACC && !ISA_HAS_MSAC"
"#"
"&& reload_completed"
- [(set (match_dup 6)
+ [(set (match_dup 5)
(neg:SI (match_dup 3)))
(parallel
[(set (match_dup 0)
(plus:SI (mult:SI (match_dup 2)
- (match_dup 6))
+ (match_dup 5))
(match_dup 1)))
- (clobber (match_dup 4))
- (clobber (match_dup 5))])]
+ (clobber (match_dup 4))])]
""
[(set_attr "type" "imadd")
(set_attr "length" "8")])
@@ -1418,8 +1391,7 @@ (define_insn "*macc2"
(set (match_operand:SI 3 "register_operand" "=d")
(plus:SI (mult:SI (match_dup 1)
(match_dup 2))
- (match_dup 0)))
- (clobber (match_scratch:SI 4 "=h"))]
+ (match_dup 0)))]
"ISA_HAS_MACC && reload_completed"
"macc\t%3,%1,%2"
[(set_attr "type" "imadd")
@@ -1433,8 +1405,7 @@ (define_insn "*msac2"
(set (match_operand:SI 3 "register_operand" "=d")
(minus:SI (match_dup 0)
(mult:SI (match_dup 1)
- (match_dup 2))))
- (clobber (match_scratch:SI 4 "=h"))]
+ (match_dup 2))))]
"ISA_HAS_MSAC && reload_completed"
"msac\t%3,%1,%2"
[(set_attr "type" "imadd")
@@ -1445,23 +1416,19 @@ (define_insn "*msac2"
;;
;; Operand 0: LO
;; Operand 1: macc/msac
-;; Operand 2: HI
-;; Operand 3: GPR (destination)
+;; Operand 2: GPR (destination)
(define_peephole2
[(parallel
- [(set (match_operand:SI 0 "register_operand")
+ [(set (match_operand:SI 0 "lo_operand")
(match_operand:SI 1 "macc_msac_operand"))
- (clobber (match_operand:SI 2 "register_operand"))
(clobber (scratch:SI))])
- (set (match_operand:SI 3 "register_operand")
- (unspec:SI [(match_dup 0) (match_dup 2)] UNSPEC_MFHILO))]
+ (set (match_operand:SI 2 "d_operand")
+ (match_dup 0))]
""
[(parallel [(set (match_dup 0)
(match_dup 1))
- (set (match_dup 3)
- (match_dup 1))
- (clobber (match_dup 2))])]
- "")
+ (set (match_dup 2)
+ (match_dup 1))])])
;; When we have a three-address multiplication instruction, it should
;; be faster to do a separate multiply and add, rather than moving
@@ -1475,32 +1442,26 @@ (define_peephole2
;; Operand 2: GPR (addend)
;; Operand 3: GPR (destination)
;; Operand 4: macc/msac
-;; Operand 5: HI
-;; Operand 6: new multiplication
-;; Operand 7: new addition/subtraction
+;; Operand 5: new multiplication
+;; Operand 6: new addition/subtraction
(define_peephole2
[(match_scratch:SI 0 "d")
- (set (match_operand:SI 1 "register_operand")
- (match_operand:SI 2 "register_operand"))
+ (set (match_operand:SI 1 "lo_operand")
+ (match_operand:SI 2 "d_operand"))
(match_dup 0)
(parallel
- [(set (match_operand:SI 3 "register_operand")
+ [(set (match_operand:SI 3 "d_operand")
(match_operand:SI 4 "macc_msac_operand"))
- (clobber (match_operand:SI 5 "register_operand"))
(clobber (match_dup 1))])]
- "ISA_HAS_MUL3
- && true_regnum (operands[1]) == LO_REGNUM
- && peep2_reg_dead_p (2, operands[1])
- && GP_REG_P (true_regnum (operands[3]))"
+ "ISA_HAS_MUL3 && peep2_reg_dead_p (2, operands[1])"
[(parallel [(set (match_dup 0)
- (match_dup 6))
- (clobber (match_dup 5))
+ (match_dup 5))
(clobber (match_dup 1))])
(set (match_dup 3)
- (match_dup 7))]
+ (match_dup 6))]
{
- operands[6] = XEXP (operands[4], GET_CODE (operands[4]) == PLUS ? 0 : 1);
- operands[7] = gen_rtx_fmt_ee (GET_CODE (operands[4]), SImode,
+ operands[5] = XEXP (operands[4], GET_CODE (operands[4]) == PLUS ? 0 : 1);
+ operands[6] = gen_rtx_fmt_ee (GET_CODE (operands[4]), SImode,
operands[2], operands[0]);
})
@@ -1510,33 +1471,30 @@ (define_peephole2
;; Operand 1: LO
;; Operand 2: GPR (addend)
;; Operand 3: macc/msac
-;; Operand 4: HI
-;; Operand 5: GPR (destination)
-;; Operand 6: new multiplication
-;; Operand 7: new addition/subtraction
+;; Operand 4: GPR (destination)
+;; Operand 5: new multiplication
+;; Operand 6: new addition/subtraction
(define_peephole2
[(match_scratch:SI 0 "d")
- (set (match_operand:SI 1 "register_operand")
- (match_operand:SI 2 "register_operand"))
+ (set (match_operand:SI 1 "lo_operand")
+ (match_operand:SI 2 "d_operand"))
(match_dup 0)
(parallel
[(set (match_dup 1)
(match_operand:SI 3 "macc_msac_operand"))
- (clobber (match_operand:SI 4 "register_operand"))
(clobber (scratch:SI))])
(match_dup 0)
- (set (match_operand:SI 5 "register_operand")
- (unspec:SI [(match_dup 1) (match_dup 4)] UNSPEC_MFHILO))]
+ (set (match_operand:SI 4 "d_operand")
+ (match_dup 1))]
"ISA_HAS_MUL3 && peep2_reg_dead_p (3, operands[1])"
[(parallel [(set (match_dup 0)
- (match_dup 6))
- (clobber (match_dup 4))
+ (match_dup 5))
(clobber (match_dup 1))])
- (set (match_dup 5)
- (match_dup 7))]
+ (set (match_dup 4)
+ (match_dup 6))]
{
- operands[6] = XEXP (operands[4], GET_CODE (operands[4]) == PLUS ? 0 : 1);
- operands[7] = gen_rtx_fmt_ee (GET_CODE (operands[4]), SImode,
+ operands[5] = XEXP (operands[3], GET_CODE (operands[3]) == PLUS ? 0 : 1);
+ operands[6] = gen_rtx_fmt_ee (GET_CODE (operands[3]), SImode,
operands[2], operands[0]);
})
@@ -1545,9 +1503,8 @@ (define_insn "*mul_sub_si"
(minus:SI (match_operand:SI 1 "register_operand" "0,l,*d")
(mult:SI (match_operand:SI 2 "register_operand" "d,d,d")
(match_operand:SI 3 "register_operand" "d,d,d"))))
- (clobber (match_scratch:SI 4 "=h,h,h"))
- (clobber (match_scratch:SI 5 "=X,1,l"))
- (clobber (match_scratch:SI 6 "=X,X,&d"))]
+ (clobber (match_scratch:SI 4 "=X,1,l"))
+ (clobber (match_scratch:SI 5 "=X,X,&d"))]
"GENERATE_MADD_MSUB"
"@
msub\t%2,%3
@@ -1557,52 +1514,45 @@ (define_insn "*mul_sub_si"
(set_attr "mode" "SI")
(set_attr "length" "4,8,8")])
-;; Split the above insn if we failed to get LO allocated.
+;; Split *mul_sub_si if both the source and destination accumulator
+;; values are GPRs.
(define_split
- [(set (match_operand:SI 0 "register_operand")
- (minus:SI (match_operand:SI 1 "register_operand")
- (mult:SI (match_operand:SI 2 "register_operand")
- (match_operand:SI 3 "register_operand"))))
- (clobber (match_scratch:SI 4))
- (clobber (match_scratch:SI 5))
- (clobber (match_scratch:SI 6))]
- "reload_completed && !TARGET_DEBUG_D_MODE
- && GP_REG_P (true_regnum (operands[0]))
- && GP_REG_P (true_regnum (operands[1]))"
- [(parallel [(set (match_dup 6)
+ [(set (match_operand:SI 0 "d_operand")
+ (minus:SI (match_operand:SI 1 "d_operand")
+ (mult:SI (match_operand:SI 2 "d_operand")
+ (match_operand:SI 3 "d_operand"))))
+ (clobber (match_operand:SI 4 "lo_operand"))
+ (clobber (match_operand:SI 5 "d_operand"))]
+ "reload_completed && !TARGET_DEBUG_D_MODE"
+ [(parallel [(set (match_dup 5)
(mult:SI (match_dup 2) (match_dup 3)))
- (clobber (match_dup 4))
- (clobber (match_dup 5))])
- (set (match_dup 0) (minus:SI (match_dup 1) (match_dup 6)))]
+ (clobber (match_dup 4))])
+ (set (match_dup 0) (minus:SI (match_dup 1) (match_dup 5)))]
"")
-;; Splitter to copy result of MSUB to a general register
+;; Split *mul_acc_si if the destination accumulator value is in a GPR
+;; and the source accumulator value is in LO.
(define_split
- [(set (match_operand:SI 0 "register_operand")
- (minus:SI (match_operand:SI 1 "register_operand")
- (mult:SI (match_operand:SI 2 "register_operand")
- (match_operand:SI 3 "register_operand"))))
- (clobber (match_scratch:SI 4))
- (clobber (match_scratch:SI 5))
- (clobber (match_scratch:SI 6))]
- "reload_completed && !TARGET_DEBUG_D_MODE
- && GP_REG_P (true_regnum (operands[0]))
- && true_regnum (operands[1]) == LO_REGNUM"
+ [(set (match_operand:SI 0 "d_operand")
+ (minus:SI (match_operand:SI 1 "lo_operand")
+ (mult:SI (match_operand:SI 2 "d_operand")
+ (match_operand:SI 3 "d_operand"))))
+ (clobber (match_dup 1))
+ (clobber (scratch:SI))]
+ "reload_completed && !TARGET_DEBUG_D_MODE"
[(parallel [(set (match_dup 1)
(minus:SI (match_dup 1)
(mult:SI (match_dup 2) (match_dup 3))))
- (clobber (match_dup 4))
- (clobber (match_dup 5))
- (clobber (match_dup 6))])
- (set (match_dup 0) (unspec:SI [(match_dup 5) (match_dup 4)] UNSPEC_MFHILO))]
+ (clobber (scratch:SI))
+ (clobber (scratch:SI))])
+ (set (match_dup 0) (match_dup 1))]
"")
(define_insn "*muls"
- [(set (match_operand:SI 0 "register_operand" "=l,d")
+ [(set (match_operand:SI 0 "register_operand" "=l,d")
(neg:SI (mult:SI (match_operand:SI 1 "register_operand" "d,d")
(match_operand:SI 2 "register_operand" "d,d"))))
- (clobber (match_scratch:SI 3 "=h,h"))
- (clobber (match_scratch:SI 4 "=X,l"))]
+ (clobber (match_scratch:SI 3 "=X,l"))]
"ISA_HAS_MULS"
"@
muls\t$0,%1,%2
@@ -1610,31 +1560,23 @@ (define_insn "*muls"
[(set_attr "type" "imul,imul3")
(set_attr "mode" "SI")])
-;; ??? We could define a mulditi3 pattern when TARGET_64BIT.
-
(define_expand "<u>mulsidi3"
- [(parallel
- [(set (match_operand:DI 0 "register_operand")
- (mult:DI (any_extend:DI (match_operand:SI 1 "register_operand"))
- (any_extend:DI (match_operand:SI 2 "register_operand"))))
- (clobber (scratch:DI))
- (clobber (scratch:DI))
- (clobber (scratch:DI))])]
+ [(set (match_operand:DI 0 "register_operand")
+ (mult:DI (any_extend:DI (match_operand:SI 1 "register_operand"))
+ (any_extend:DI (match_operand:SI 2 "register_operand"))))]
"!TARGET_64BIT || !TARGET_FIX_R4000"
{
- if (!TARGET_64BIT)
- {
- if (!TARGET_FIX_R4000)
- emit_insn (gen_<u>mulsidi3_32bit_internal (operands[0], operands[1],
- operands[2]));
- else
- emit_insn (gen_<u>mulsidi3_32bit_r4000 (operands[0], operands[1],
- operands[2]));
- DONE;
- }
+ if (TARGET_64BIT)
+ emit_insn (gen_<u>mulsidi3_64bit (operands[0], operands[1], operands[2]));
+ else if (TARGET_FIX_R4000)
+ emit_insn (gen_<u>mulsidi3_32bit_r4000 (operands[0], operands[1],
+ operands[2]));
+ else
+ emit_insn (gen_<u>mulsidi3_32bit (operands[0], operands[1], operands[2]));
+ DONE;
})
-(define_insn "<u>mulsidi3_32bit_internal"
+(define_insn "<u>mulsidi3_32bit"
[(set (match_operand:DI 0 "register_operand" "=x")
(mult:DI (any_extend:DI (match_operand:SI 1 "register_operand" "d"))
(any_extend:DI (match_operand:SI 2 "register_operand" "d"))))]
@@ -1649,42 +1591,35 @@ (define_insn "<u>mulsidi3_32bit_r4000"
(any_extend:DI (match_operand:SI 2 "register_operand" "d"))))
(clobber (match_scratch:DI 3 "=x"))]
"!TARGET_64BIT && TARGET_FIX_R4000"
- "mult<u>\t%1,%2\;mflo\t%L0;mfhi\t%M0"
+ "mult<u>\t%1,%2\;mflo\t%L0\;mfhi\t%M0"
[(set_attr "type" "imul")
(set_attr "mode" "SI")
(set_attr "length" "12")])
-(define_insn_and_split "*<u>mulsidi3_64bit"
+(define_insn_and_split "<u>mulsidi3_64bit"
[(set (match_operand:DI 0 "register_operand" "=d")
(mult:DI (any_extend:DI (match_operand:SI 1 "register_operand" "d"))
(any_extend:DI (match_operand:SI 2 "register_operand" "d"))))
- (clobber (match_scratch:DI 3 "=l"))
- (clobber (match_scratch:DI 4 "=h"))
- (clobber (match_scratch:DI 5 "=d"))]
+ (clobber (match_scratch:TI 3 "=x"))
+ (clobber (match_scratch:DI 4 "=d"))]
"TARGET_64BIT && !TARGET_FIX_R4000"
"#"
"&& reload_completed"
- [(parallel
- [(set (match_dup 3)
- (sign_extend:DI
- (mult:SI (match_dup 1)
- (match_dup 2))))
- (set (match_dup 4)
- (ashiftrt:DI
- (mult:DI (any_extend:DI (match_dup 1))
- (any_extend:DI (match_dup 2)))
- (const_int 32)))])
-
- ;; OP5 <- LO, OP0 <- HI
- (set (match_dup 5) (unspec:DI [(match_dup 3) (match_dup 4)] UNSPEC_MFHILO))
- (set (match_dup 0) (unspec:DI [(match_dup 4) (match_dup 3)] UNSPEC_MFHILO))
-
- ;; Zero-extend OP5.
- (set (match_dup 5)
- (ashift:DI (match_dup 5)
+ [(set (match_dup 3)
+ (unspec:TI [(mult:DI (any_extend:DI (match_dup 1))
+ (any_extend:DI (match_dup 2)))]
+ UNSPEC_SET_HILO))
+
+ ;; OP4 <- LO, OP0 <- HI
+ (set (match_dup 4) (match_dup 5))
+ (set (match_dup 0) (unspec:DI [(match_dup 3)] UNSPEC_MFHI))
+
+ ;; Zero-extend OP4.
+ (set (match_dup 4)
+ (ashift:DI (match_dup 4)
(const_int 32)))
- (set (match_dup 5)
- (lshiftrt:DI (match_dup 5)
+ (set (match_dup 4)
+ (lshiftrt:DI (match_dup 4)
(const_int 32)))
;; Shift OP0 into place.
@@ -1695,24 +1630,21 @@ (define_insn_and_split "*<u>mulsidi3_64b
;; OR the two halves together
(set (match_dup 0)
(ior:DI (match_dup 0)
- (match_dup 5)))]
- ""
+ (match_dup 4)))]
+ { operands[5] = gen_rtx_REG (DImode, LO_REGNUM); }
[(set_attr "type" "imul")
(set_attr "mode" "SI")
(set_attr "length" "24")])
-(define_insn "*<u>mulsidi3_64bit_parts"
- [(set (match_operand:DI 0 "register_operand" "=l")
- (sign_extend:DI
- (mult:SI (match_operand:SI 2 "register_operand" "d")
- (match_operand:SI 3 "register_operand" "d"))))
- (set (match_operand:DI 1 "register_operand" "=h")
- (ashiftrt:DI
- (mult:DI (any_extend:DI (match_dup 2))
- (any_extend:DI (match_dup 3)))
- (const_int 32)))]
+(define_insn "<u>mulsidi3_64bit_hilo"
+ [(set (match_operand:TI 0 "register_operand" "=x")
+ (unspec:TI
+ [(mult:DI
+ (any_extend:DI (match_operand:SI 1 "register_operand" "d"))
+ (any_extend:DI (match_operand:SI 2 "register_operand" "d")))]
+ UNSPEC_SET_HILO))]
"TARGET_64BIT && !TARGET_FIX_R4000"
- "mult<u>\t%2,%3"
+ "mult<u>\t%1,%2"
[(set_attr "type" "imul")
(set_attr "mode" "SI")])
@@ -1756,7 +1688,7 @@ (define_expand "<su>mulsi3_highpart"
(mult:DI (any_extend:DI (match_operand:SI 1 "register_operand"))
(any_extend:DI (match_operand:SI 2 "register_operand")))
(const_int 32))))]
- "ISA_HAS_MULHI || !TARGET_FIX_R4000"
+ ""
{
if (ISA_HAS_MULHI)
emit_insn (gen_<su>mulsi3_highpart_mulhi_internal (operands[0],
@@ -1768,72 +1700,133 @@ (define_expand "<su>mulsi3_highpart"
DONE;
})
-(define_insn "<su>mulsi3_highpart_internal"
- [(set (match_operand:SI 0 "register_operand" "=h")
+(define_insn_and_split "<su>mulsi3_highpart_internal"
+ [(set (match_operand:SI 0 "register_operand" "=d")
(truncate:SI
(lshiftrt:DI
(mult:DI (any_extend:DI (match_operand:SI 1 "register_operand" "d"))
(any_extend:DI (match_operand:SI 2 "register_operand" "d")))
(const_int 32))))
(clobber (match_scratch:SI 3 "=l"))]
- "!ISA_HAS_MULHI && !TARGET_FIX_R4000"
- "mult<u>\t%1,%2"
+ "!ISA_HAS_MULHI"
+ { return TARGET_FIX_R4000 ? "mult<u>\t%1,%2\n\tmfhi\t%0" : "#"; }
+ "&& reload_completed && !TARGET_FIX_R4000"
+ [(const_int 0)]
+{
+ rtx hilo;
+
+ if (TARGET_64BIT)
+ {
+ hilo = gen_rtx_REG (TImode, MD_REG_FIRST);
+ emit_insn (gen_<u>mulsidi3_64bit_hilo (hilo, operands[1], operands[2]));
+ emit_insn (gen_mfhisi_ti (operands[0], hilo));
+ }
+ else
+ {
+ hilo = gen_rtx_REG (DImode, MD_REG_FIRST);
+ emit_insn (gen_<u>mulsidi3_32bit (hilo, operands[1], operands[2]));
+ emit_insn (gen_mfhisi_di (operands[0], hilo));
+ }
+ DONE;
+}
[(set_attr "type" "imul")
- (set_attr "mode" "SI")])
+ (set_attr "mode" "SI")
+ (set_attr "length" "8")])
(define_insn "<su>mulsi3_highpart_mulhi_internal"
- [(set (match_operand:SI 0 "register_operand" "=h,d")
+ [(set (match_operand:SI 0 "register_operand" "=d")
(truncate:SI
(lshiftrt:DI
(mult:DI
- (any_extend:DI (match_operand:SI 1 "register_operand" "d,d"))
- (any_extend:DI (match_operand:SI 2 "register_operand" "d,d")))
+ (any_extend:DI (match_operand:SI 1 "register_operand" "d"))
+ (any_extend:DI (match_operand:SI 2 "register_operand" "d")))
(const_int 32))))
- (clobber (match_scratch:SI 3 "=l,l"))
- (clobber (match_scratch:SI 4 "=X,h"))]
+ (clobber (match_scratch:SI 3 "=l"))]
"ISA_HAS_MULHI"
- "@
- mult<u>\t%1,%2
- mulhi<u>\t%0,%1,%2"
- [(set_attr "type" "imul,imul3")
+ "mulhi<u>\t%0,%1,%2"
+ [(set_attr "type" "imul3")
(set_attr "mode" "SI")])
(define_insn "*<su>mulsi3_highpart_neg_mulhi_internal"
- [(set (match_operand:SI 0 "register_operand" "=h,d")
+ [(set (match_operand:SI 0 "register_operand" "=d")
(truncate:SI
(lshiftrt:DI
(neg:DI
(mult:DI
- (any_extend:DI (match_operand:SI 1 "register_operand" "d,d"))
- (any_extend:DI (match_operand:SI 2 "register_operand" "d,d"))))
+ (any_extend:DI (match_operand:SI 1 "register_operand" "d"))
+ (any_extend:DI (match_operand:SI 2 "register_operand" "d"))))
(const_int 32))))
- (clobber (match_scratch:SI 3 "=l,l"))
- (clobber (match_scratch:SI 4 "=X,h"))]
+ (clobber (match_scratch:SI 3 "=l"))]
"ISA_HAS_MULHI"
- "@
- mulshi<u>\t%.,%1,%2
- mulshi<u>\t%0,%1,%2"
- [(set_attr "type" "imul,imul3")
+ "mulshi<u>\t%0,%1,%2"
+ [(set_attr "type" "imul3")
(set_attr "mode" "SI")])
;; Disable unsigned multiplication for -mfix-vr4120. This is for VR4120
;; errata MD(0), which says that dmultu does not always produce the
;; correct result.
-(define_insn "<su>muldi3_highpart"
- [(set (match_operand:DI 0 "register_operand" "=h")
+(define_insn_and_split "<su>muldi3_highpart"
+ [(set (match_operand:DI 0 "register_operand" "=d")
(truncate:DI
(lshiftrt:TI
- (mult:TI
- (any_extend:TI (match_operand:DI 1 "register_operand" "d"))
- (any_extend:TI (match_operand:DI 2 "register_operand" "d")))
+ (mult:TI (any_extend:TI (match_operand:DI 1 "register_operand" "d"))
+ (any_extend:TI (match_operand:DI 2 "register_operand" "d")))
(const_int 64))))
(clobber (match_scratch:DI 3 "=l"))]
- "TARGET_64BIT && !TARGET_FIX_R4000
+ "TARGET_64BIT && !(<CODE> == ZERO_EXTEND && TARGET_FIX_VR4120)"
+ { return TARGET_FIX_R4000 ? "dmult<u>\t%1,%2\n\tmfhi\t%0" : "#"; }
+ "&& reload_completed && !TARGET_FIX_R4000"
+ [(const_int 0)]
+{
+ rtx hilo;
+
+ hilo = gen_rtx_REG (TImode, MD_REG_FIRST);
+ emit_insn (gen_<u>mulditi3_internal (hilo, operands[1], operands[2]));
+ emit_insn (gen_mfhidi_ti (operands[0], hilo));
+ DONE;
+}
+ [(set_attr "type" "imul")
+ (set_attr "mode" "DI")
+ (set_attr "length" "8")])
+
+(define_expand "<u>mulditi3"
+ [(set (match_operand:TI 0 "register_operand")
+ (mult:TI (any_extend:TI (match_operand:DI 1 "register_operand"))
+ (any_extend:TI (match_operand:DI 2 "register_operand"))))]
+ "TARGET_64BIT && !(<CODE> == ZERO_EXTEND && TARGET_FIX_VR4120)"
+{
+ if (TARGET_FIX_R4000)
+ emit_insn (gen_<u>mulditi3_r4000 (operands[0], operands[1], operands[2]));
+ else
+ emit_insn (gen_<u>mulditi3_internal (operands[0], operands[1],
+ operands[2]));
+ DONE;
+})
+
+(define_insn "<u>mulditi3_internal"
+ [(set (match_operand:TI 0 "register_operand" "=x")
+ (mult:TI (any_extend:TI (match_operand:DI 1 "register_operand" "d"))
+ (any_extend:TI (match_operand:DI 2 "register_operand" "d"))))]
+ "TARGET_64BIT
+ && !TARGET_FIX_R4000
&& !(<CODE> == ZERO_EXTEND && TARGET_FIX_VR4120)"
"dmult<u>\t%1,%2"
[(set_attr "type" "imul")
(set_attr "mode" "DI")])
+(define_insn "<u>mulditi3_r4000"
+ [(set (match_operand:TI 0 "register_operand" "=d")
+ (mult:TI (any_extend:TI (match_operand:DI 1 "register_operand" "d"))
+ (any_extend:TI (match_operand:DI 2 "register_operand" "d"))))
+ (clobber (match_scratch:TI 3 "=x"))]
+ "TARGET_64BIT
+ && TARGET_FIX_R4000
+ && !(<CODE> == ZERO_EXTEND && TARGET_FIX_VR4120)"
+ "dmult<u>\t%1,%2\;mflo\t%L0\;mfhi\t%M0"
+ [(set_attr "type" "imul")
+ (set_attr "mode" "DI")
+ (set_attr "length" "12")])
+
;; The R4650 supports a 32-bit multiply/ 64-bit accumulate
;; instruction. The HI/LO registers are used as a 64-bit accumulator.
@@ -1841,8 +1834,7 @@ (define_insn "madsi"
[(set (match_operand:SI 0 "register_operand" "+l")
(plus:SI (mult:SI (match_operand:SI 1 "register_operand" "d")
(match_operand:SI 2 "register_operand" "d"))
- (match_dup 0)))
- (clobber (match_scratch:SI 3 "=h"))]
+ (match_dup 0)))]
"TARGET_MAD"
"mad\t%1,%2"
[(set_attr "type" "imadd")
@@ -2017,29 +2009,80 @@ (define_insn "*recip<mode>3"
;; VR4120 errata MD(A1): signed division instructions do not work correctly
;; with negative operands. We use special libgcc functions instead.
-(define_insn "divmod<mode>4"
+(define_insn_and_split "divmod<mode>4"
[(set (match_operand:GPR 0 "register_operand" "=l")
(div:GPR (match_operand:GPR 1 "register_operand" "d")
(match_operand:GPR 2 "register_operand" "d")))
- (set (match_operand:GPR 3 "register_operand" "=h")
+ (set (match_operand:GPR 3 "register_operand" "=d")
(mod:GPR (match_dup 1)
(match_dup 2)))]
"!TARGET_FIX_VR4120"
- { return mips_output_division ("<d>div\t$0,%1,%2", operands); }
- [(set_attr "type" "idiv")
- (set_attr "mode" "<MODE>")])
+ "#"
+ "&& reload_completed"
+ [(const_int 0)]
+{
+ rtx hilo;
+
+ if (TARGET_64BIT)
+ {
+ hilo = gen_rtx_REG (TImode, MD_REG_FIRST);
+ emit_insn (gen_divmod<mode>4_hilo_ti (hilo, operands[1], operands[2]));
+ emit_insn (gen_mfhi<mode>_ti (operands[3], hilo));
+ }
+ else
+ {
+ hilo = gen_rtx_REG (DImode, MD_REG_FIRST);
+ emit_insn (gen_divmod<mode>4_hilo_di (hilo, operands[1], operands[2]));
+ emit_insn (gen_mfhi<mode>_di (operands[3], hilo));
+ }
+ DONE;
+}
+ [(set_attr "type" "idiv")
+ (set_attr "mode" "<MODE>")
+ (set_attr "length" "8")])
-(define_insn "udivmod<mode>4"
+(define_insn_and_split "udivmod<mode>4"
[(set (match_operand:GPR 0 "register_operand" "=l")
(udiv:GPR (match_operand:GPR 1 "register_operand" "d")
(match_operand:GPR 2 "register_operand" "d")))
- (set (match_operand:GPR 3 "register_operand" "=h")
+ (set (match_operand:GPR 3 "register_operand" "=d")
(umod:GPR (match_dup 1)
(match_dup 2)))]
""
- { return mips_output_division ("<d>divu\t$0,%1,%2", operands); }
+ "#"
+ "reload_completed"
+ [(const_int 0)]
+{
+ rtx hilo;
+
+ if (TARGET_64BIT)
+ {
+ hilo = gen_rtx_REG (TImode, MD_REG_FIRST);
+ emit_insn (gen_udivmod<mode>4_hilo_ti (hilo, operands[1], operands[2]));
+ emit_insn (gen_mfhi<mode>_ti (operands[3], hilo));
+ }
+ else
+ {
+ hilo = gen_rtx_REG (DImode, MD_REG_FIRST);
+ emit_insn (gen_udivmod<mode>4_hilo_di (hilo, operands[1], operands[2]));
+ emit_insn (gen_mfhi<mode>_di (operands[3], hilo));
+ }
+ DONE;
+}
+ [(set_attr "type" "idiv")
+ (set_attr "mode" "<MODE>")
+ (set_attr "length" "8")])
+
+(define_insn "<u>divmod<GPR:mode>4_hilo_<HILO:mode>"
+ [(set (match_operand:HILO 0 "register_operand" "=x")
+ (unspec:HILO
+ [(any_div:GPR (match_operand:GPR 1 "register_operand" "d")
+ (match_operand:GPR 2 "register_operand" "d"))]
+ UNSPEC_SET_HILO))]
+ ""
+ { return mips_output_division ("<GPR:d>div<u>\t%.,%1,%2", operands); }
[(set_attr "type" "idiv")
- (set_attr "mode" "<MODE>")])
+ (set_attr "mode" "<GPR:MODE>")])
;;
;; ....................
@@ -3241,7 +3284,7 @@ (define_insn_and_split "*lea_high64"
;; dsll32 op1,op1,0
;; daddu op1,op1,op0
(define_peephole2
- [(set (match_operand:DI 1 "register_operand")
+ [(set (match_operand:DI 1 "d_operand")
(high:DI (match_operand:DI 2 "absolute_symbolic_operand")))
(match_scratch:DI 0 "d")]
"TARGET_EXPLICIT_RELOCS && ABI_HAS_64BIT_SYMBOLS"
@@ -3294,8 +3337,8 @@ (define_insn_and_split "*lea64"
;;
;; on MIPS16 targets.
(define_split
- [(set (match_operand:SI 0 "register_operand" "=d")
- (high:SI (match_operand:SI 1 "absolute_symbolic_operand" "")))]
+ [(set (match_operand:SI 0 "d_operand")
+ (high:SI (match_operand:SI 1 "absolute_symbolic_operand")))]
"TARGET_MIPS16 && reload_completed"
[(set (match_dup 0) (match_dup 2))
(set (match_dup 0) (ashift:SI (match_dup 0) (const_int 16)))]
@@ -3464,7 +3507,7 @@ (define_insn "*movdi_32bit"
&& (register_operand (operands[0], DImode)
|| reg_or_0_operand (operands[1], DImode))"
{ return mips_output_move (operands[0], operands[1]); }
- [(set_attr "type" "multi,multi,load,store,mthilo,mfhilo,mtc,load,mfc,store")
+ [(set_attr "type" "multi,multi,load,store,multi,multi,mtc,load,mfc,store")
(set_attr "mode" "DI")
(set_attr "length" "8,16,*,*,8,8,8,*,8,*")])
@@ -3475,7 +3518,7 @@ (define_insn "*movdi_gp32_fp64"
&& (register_operand (operands[0], DImode)
|| reg_or_0_operand (operands[1], DImode))"
{ return mips_output_move (operands[0], operands[1]); }
- [(set_attr "type" "multi,multi,load,store,mthilo,mfhilo,mtc,fpload,mfc,fpstore")
+ [(set_attr "type" "multi,multi,load,store,multi,multi,mtc,fpload,mfc,fpstore")
(set_attr "mode" "DI")
(set_attr "length" "8,16,*,*,8,8,8,*,8,*")])
@@ -3486,29 +3529,29 @@ (define_insn "*movdi_32bit_mips16"
&& (register_operand (operands[0], DImode)
|| register_operand (operands[1], DImode))"
{ return mips_output_move (operands[0], operands[1]); }
- [(set_attr "type" "multi,multi,multi,multi,multi,load,store,mfhilo")
+ [(set_attr "type" "multi,multi,multi,multi,multi,load,store,multi")
(set_attr "mode" "DI")
(set_attr "length" "8,8,8,8,12,*,*,8")])
(define_insn "*movdi_64bit"
- [(set (match_operand:DI 0 "nonimmediate_operand" "=d,d,e,d,m,*f,*f,*d,*m,*x,*B*C*D,*B*C*D,*d,*m")
- (match_operand:DI 1 "move_operand" "d,U,T,m,dJ,*d*J,*m,*f,*f,*J*d,*d,*m,*B*C*D,*B*C*D"))]
+ [(set (match_operand:DI 0 "nonimmediate_operand" "=d,d,e,d,m,*f,*f,*d,*m,*a,*d,*B*C*D,*B*C*D,*d,*m")
+ (match_operand:DI 1 "move_operand" "d,U,T,m,dJ,*d*J,*m,*f,*f,*J*d,*a,*d,*m,*B*C*D,*B*C*D"))]
"TARGET_64BIT && !TARGET_MIPS16
&& (register_operand (operands[0], DImode)
|| reg_or_0_operand (operands[1], DImode))"
{ return mips_output_move (operands[0], operands[1]); }
- [(set_attr "type" "move,const,const,load,store,mtc,fpload,mfc,fpstore,mthilo,mtc,load,mfc,store")
+ [(set_attr "type" "move,const,const,load,store,mtc,fpload,mfc,fpstore,mthilo,mfhilo,mtc,load,mfc,store")
(set_attr "mode" "DI")
- (set_attr "length" "4,*,*,*,*,4,*,4,*,4,8,*,8,*")])
+ (set_attr "length" "4,*,*,*,*,4,*,4,*,4,4,8,*,8,*")])
(define_insn "*movdi_64bit_mips16"
- [(set (match_operand:DI 0 "nonimmediate_operand" "=d,y,d,d,d,d,d,d,m")
- (match_operand:DI 1 "move_operand" "d,d,y,K,N,kf,U,m,d"))]
+ [(set (match_operand:DI 0 "nonimmediate_operand" "=d,y,d,d,d,d,d,d,m,*d")
+ (match_operand:DI 1 "move_operand" "d,d,y,K,N,kf,U,m,d,*a"))]
"TARGET_64BIT && TARGET_MIPS16
&& (register_operand (operands[0], DImode)
|| register_operand (operands[1], DImode))"
{ return mips_output_move (operands[0], operands[1]); }
- [(set_attr "type" "move,move,move,arith,arith,load,const,load,store")
+ [(set_attr "type" "move,move,move,arith,arith,load,const,load,store,mfhilo")
(set_attr "mode" "DI")
(set_attr_alternative "length"
[(const_int 4)
@@ -3523,7 +3566,8 @@ (define_insn "*movdi_64bit_mips16"
(const_int 8)
(const_string "*")
(const_string "*")
- (const_string "*")])])
+ (const_string "*")
+ (const_int 4)])])
;; On the mips16, we can split ld $r,N($r) into an add and a load,
@@ -3531,14 +3575,11 @@ (define_insn "*movdi_64bit_mips16"
;; load are 2 2 byte instructions.
(define_split
- [(set (match_operand:DI 0 "register_operand")
+ [(set (match_operand:DI 0 "d_operand")
(mem:DI (plus:DI (match_dup 0)
(match_operand:DI 1 "const_int_operand"))))]
"TARGET_64BIT && TARGET_MIPS16 && reload_completed
&& !TARGET_DEBUG_D_MODE
- && REG_P (operands[0])
- && M16_REG_P (REGNO (operands[0]))
- && GET_CODE (operands[1]) == CONST_INT
&& ((INTVAL (operands[1]) < 0
&& INTVAL (operands[1]) >= -0x10)
|| (INTVAL (operands[1]) >= 32 * 8
@@ -3589,7 +3630,7 @@ (define_expand "movsi"
(define_insn "*movsi_internal"
[(set (match_operand:SI 0 "nonimmediate_operand" "=d,d,e,d,m,*f,*f,*d,*m,*d,*z,*a,*d,*B*C*D,*B*C*D,*d,*m")
- (match_operand:SI 1 "move_operand" "d,U,T,m,dJ,*d*J,*m,*f,*f,*z,*d,*J*d,*A,*d,*m,*B*C*D,*B*C*D"))]
+ (match_operand:SI 1 "move_operand" "d,U,T,m,dJ,*d*J,*m,*f,*f,*z,*d,*J*d,*a,*d,*m,*B*C*D,*B*C*D"))]
"!TARGET_MIPS16
&& (register_operand (operands[0], SImode)
|| reg_or_0_operand (operands[1], SImode))"
@@ -3599,13 +3640,13 @@ (define_insn "*movsi_internal"
(set_attr "length" "4,*,*,*,*,4,*,4,*,4,4,4,4,4,*,4,*")])
(define_insn "*movsi_mips16"
- [(set (match_operand:SI 0 "nonimmediate_operand" "=d,y,d,d,d,d,d,d,m")
- (match_operand:SI 1 "move_operand" "d,d,y,K,N,kf,U,m,d"))]
+ [(set (match_operand:SI 0 "nonimmediate_operand" "=d,y,d,d,d,d,d,d,m,*d")
+ (match_operand:SI 1 "move_operand" "d,d,y,K,N,kf,U,m,d,*a"))]
"TARGET_MIPS16
&& (register_operand (operands[0], SImode)
|| register_operand (operands[1], SImode))"
{ return mips_output_move (operands[0], operands[1]); }
- [(set_attr "type" "move,move,move,arith,arith,load,const,load,store")
+ [(set_attr "type" "move,move,move,arith,arith,load,const,load,store,mfhilo")
(set_attr "mode" "SI")
(set_attr_alternative "length"
[(const_int 4)
@@ -3620,20 +3661,18 @@ (define_insn "*movsi_mips16"
(const_int 8)
(const_string "*")
(const_string "*")
- (const_string "*")])])
+ (const_string "*")
+ (const_int 4)])])
;; On the mips16, we can split lw $r,N($r) into an add and a load,
;; when the original load is a 4 byte instruction but the add and the
;; load are 2 2 byte instructions.
(define_split
- [(set (match_operand:SI 0 "register_operand")
+ [(set (match_operand:SI 0 "d_operand")
(mem:SI (plus:SI (match_dup 0)
(match_operand:SI 1 "const_int_operand"))))]
"TARGET_MIPS16 && reload_completed && !TARGET_DEBUG_D_MODE
- && REG_P (operands[0])
- && M16_REG_P (REGNO (operands[0]))
- && GET_CODE (operands[1]) == CONST_INT
&& ((INTVAL (operands[1]) < 0
&& INTVAL (operands[1]) >= -0x80)
|| (INTVAL (operands[1]) >= 32 * 4
@@ -3669,12 +3708,9 @@ (define_split
;; instructions.
(define_split
- [(set (match_operand:SI 0 "register_operand")
+ [(set (match_operand:SI 0 "d_operand")
(match_operand:SI 1 "const_int_operand"))]
"TARGET_MIPS16 && reload_completed && !TARGET_DEBUG_D_MODE
- && REG_P (operands[0])
- && M16_REG_P (REGNO (operands[0]))
- && GET_CODE (operands[1]) == CONST_INT
&& INTVAL (operands[1]) >= 0x100
&& INTVAL (operands[1]) <= 0xff + 0x7f"
[(set (match_dup 0) (match_dup 1))
@@ -3797,36 +3833,24 @@ (define_expand "movhi"
})
(define_insn "*movhi_internal"
- [(set (match_operand:HI 0 "nonimmediate_operand" "=d,d,d,m,*x")
- (match_operand:HI 1 "move_operand" "d,I,m,dJ,*d"))]
+ [(set (match_operand:HI 0 "nonimmediate_operand" "=d,d,d,m,*a,*d")
+ (match_operand:HI 1 "move_operand" "d,I,m,dJ,*d*J,*a"))]
"!TARGET_MIPS16
&& (register_operand (operands[0], HImode)
|| reg_or_0_operand (operands[1], HImode))"
- "@
- move\t%0,%1
- li\t%0,%1
- lhu\t%0,%1
- sh\t%z1,%0
- mt%0\t%1"
- [(set_attr "type" "move,arith,load,store,mthilo")
+ { return mips_output_move (operands[0], operands[1]); }
+ [(set_attr "type" "move,arith,load,store,mthilo,mfhilo")
(set_attr "mode" "HI")
- (set_attr "length" "4,4,*,*,4")])
+ (set_attr "length" "4,4,*,*,4,4")])
(define_insn "*movhi_mips16"
- [(set (match_operand:HI 0 "nonimmediate_operand" "=d,y,d,d,d,d,m")
- (match_operand:HI 1 "move_operand" "d,d,y,K,N,m,d"))]
+ [(set (match_operand:HI 0 "nonimmediate_operand" "=d,y,d,d,d,d,m,*d")
+ (match_operand:HI 1 "move_operand" "d,d,y,K,N,m,d,*a"))]
"TARGET_MIPS16
&& (register_operand (operands[0], HImode)
|| register_operand (operands[1], HImode))"
- "@
- move\t%0,%1
- move\t%0,%1
- move\t%0,%1
- li\t%0,%1
- #
- lhu\t%0,%1
- sh\t%1,%0"
- [(set_attr "type" "move,move,move,arith,arith,load,store")
+ { return mips_output_move (operands[0], operands[1]); }
+ [(set_attr "type" "move,move,move,arith,arith,load,store,mfhilo")
(set_attr "mode" "HI")
(set_attr_alternative "length"
[(const_int 4)
@@ -3839,6 +3863,7 @@ (define_insn "*movhi_mips16"
(const_int 8)
(const_int 12))
(const_string "*")
+ (const_string "*")
(const_string "*")])])
@@ -3847,13 +3872,10 @@ (define_insn "*movhi_mips16"
;; load are 2 2 byte instructions.
(define_split
- [(set (match_operand:HI 0 "register_operand")
+ [(set (match_operand:HI 0 "d_operand")
(mem:HI (plus:SI (match_dup 0)
(match_operand:SI 1 "const_int_operand"))))]
"TARGET_MIPS16 && reload_completed && !TARGET_DEBUG_D_MODE
- && REG_P (operands[0])
- && M16_REG_P (REGNO (operands[0]))
- && GET_CODE (operands[1]) == CONST_INT
&& ((INTVAL (operands[1]) < 0
&& INTVAL (operands[1]) >= -0x80)
|| (INTVAL (operands[1]) >= 32 * 2
@@ -3901,51 +3923,36 @@ (define_expand "movqi"
})
(define_insn "*movqi_internal"
- [(set (match_operand:QI 0 "nonimmediate_operand" "=d,d,d,m,*x")
- (match_operand:QI 1 "move_operand" "d,I,m,dJ,*d"))]
+ [(set (match_operand:QI 0 "nonimmediate_operand" "=d,d,d,m,*a,*d")
+ (match_operand:QI 1 "move_operand" "d,I,m,dJ,*d*J,*a"))]
"!TARGET_MIPS16
&& (register_operand (operands[0], QImode)
|| reg_or_0_operand (operands[1], QImode))"
- "@
- move\t%0,%1
- li\t%0,%1
- lbu\t%0,%1
- sb\t%z1,%0
- mt%0\t%1"
- [(set_attr "type" "move,arith,load,store,mthilo")
+ { return mips_output_move (operands[0], operands[1]); }
+ [(set_attr "type" "move,arith,load,store,mthilo,mfhilo")
(set_attr "mode" "QI")
- (set_attr "length" "4,4,*,*,4")])
+ (set_attr "length" "4,4,*,*,4,4")])
(define_insn "*movqi_mips16"
- [(set (match_operand:QI 0 "nonimmediate_operand" "=d,y,d,d,d,d,m")
- (match_operand:QI 1 "move_operand" "d,d,y,K,N,m,d"))]
+ [(set (match_operand:QI 0 "nonimmediate_operand" "=d,y,d,d,d,d,m,*d")
+ (match_operand:QI 1 "move_operand" "d,d,y,K,N,m,d,*a"))]
"TARGET_MIPS16
&& (register_operand (operands[0], QImode)
|| register_operand (operands[1], QImode))"
- "@
- move\t%0,%1
- move\t%0,%1
- move\t%0,%1
- li\t%0,%1
- #
- lbu\t%0,%1
- sb\t%1,%0"
- [(set_attr "type" "move,move,move,arith,arith,load,store")
+ { return mips_output_move (operands[0], operands[1]); }
+ [(set_attr "type" "move,move,move,arith,arith,load,store,mfhilo")
(set_attr "mode" "QI")
- (set_attr "length" "4,4,4,4,8,*,*")])
+ (set_attr "length" "4,4,4,4,8,*,*,4")])
;; On the mips16, we can split lb $r,N($r) into an add and a load,
;; when the original load is a 4 byte instruction but the add and the
;; load are 2 2 byte instructions.
(define_split
- [(set (match_operand:QI 0 "register_operand")
+ [(set (match_operand:QI 0 "d_operand")
(mem:QI (plus:SI (match_dup 0)
(match_operand:SI 1 "const_int_operand"))))]
"TARGET_MIPS16 && reload_completed && !TARGET_DEBUG_D_MODE
- && REG_P (operands[0])
- && M16_REG_P (REGNO (operands[0]))
- && GET_CODE (operands[1]) == CONST_INT
&& ((INTVAL (operands[1]) < 0
&& INTVAL (operands[1]) >= -0x80)
|| (INTVAL (operands[1]) >= 32
@@ -4065,6 +4072,39 @@ (define_insn "*movdf_mips16"
(set_attr "mode" "DF")
(set_attr "length" "8,8,8,*,*")])
+;; 128-bit integer moves
+
+(define_expand "movti"
+ [(set (match_operand:TI 0)
+ (match_operand:TI 1))]
+ "TARGET_64BIT"
+{
+ if (mips_legitimize_move (TImode, operands[0], operands[1]))
+ DONE;
+})
+
+(define_insn "*movti"
+ [(set (match_operand:TI 0 "nonimmediate_operand" "=d,d,m,*a,*d")
+ (match_operand:TI 1 "move_operand" "di,m,dJ,*d*J,*a"))]
+ "TARGET_64BIT
+ && !TARGET_MIPS16
+ && (register_operand (operands[0], TImode)
+ || reg_or_0_operand (operands[1], TImode))"
+ "#"
+ [(set_attr "type" "multi,load,store,multi,multi")
+ (set_attr "length" "8,*,*,8,8")])
+
+(define_insn "*movti_mips16"
+ [(set (match_operand:TI 0 "nonimmediate_operand" "=d,y,d,d,d,d,m,*d")
+ (match_operand:TI 1 "move_operand" "d,d,y,K,N,m,d,*a"))]
+ "TARGET_64BIT
+ && TARGET_MIPS16
+ && (register_operand (operands[0], TImode)
+ || register_operand (operands[1], TImode))"
+ "#"
+ [(set_attr "type" "multi,multi,multi,multi,multi,load,store,multi")
+ (set_attr "length" "8,8,8,12,16,*,*,8")])
+
;; 128-bit floating point moves
(define_expand "movtf"
@@ -4123,7 +4163,7 @@ (define_split
;; When generating mips16 code, split moves of negative constants into
;; a positive "li" followed by a negation.
(define_split
- [(set (match_operand 0 "register_operand")
+ [(set (match_operand 0 "d_operand")
(match_operand 1 "const_int_operand"))]
"TARGET_MIPS16 && reload_completed && INTVAL (operands[1]) < 0"
[(set (match_dup 2)
@@ -4172,44 +4212,33 @@ (define_insn "movv2sf_hardfloat_32bit"
(set_attr "mode" "SF")
(set_attr "length" "4,8,*,*,*,8,8,8,*,*")])
-;; The HI and LO registers are not truly independent. If we move an mthi
-;; instruction before an mflo instruction, it will make the result of the
-;; mflo unpredictable. The same goes for mtlo and mfhi.
-;;
-;; We cope with this by making the mflo and mfhi patterns use both HI and LO.
-;; Operand 1 is the register we want, operand 2 is the other one.
-;;
-;; When generating VR4120 or VR4130 code, we use macc{,hi} and
-;; dmacc{,hi} instead of mfhi and mflo. This avoids both the normal
-;; MIPS III hi/lo hazards and the errata related to -mfix-vr4130.
-
-(define_expand "mfhilo_<mode>"
- [(set (match_operand:GPR 0 "register_operand")
- (unspec:GPR [(match_operand:GPR 1 "register_operand")
- (match_operand:GPR 2 "register_operand")]
- UNSPEC_MFHILO))])
-
-(define_insn "*mfhilo_<mode>"
- [(set (match_operand:GPR 0 "register_operand" "=d,d")
- (unspec:GPR [(match_operand:GPR 1 "register_operand" "h,l")
- (match_operand:GPR 2 "register_operand" "l,h")]
- UNSPEC_MFHILO))]
- "!ISA_HAS_MACCHI"
- "mf%1\t%0"
+;; Extract the high part of a HI/LO value. See mips_hard_regno_mode_ok_p
+;; for the reason why we can't just use (reg:GPR HI_REGNUM).
+;;
+;; When generating VR4120 or VR4130 code, we use MACCHI and DMACCHI
+;; instead of MFHI. This avoids both the normal MIPS III hi/lo hazards
+;; and the errata related to -mfix-vr4130.
+(define_insn "mfhi<GPR:mode>_<HILO:mode>"
+ [(set (match_operand:GPR 0 "register_operand" "=d")
+ (unspec:GPR [(match_operand:HILO 1 "register_operand" "x")]
+ UNSPEC_MFHI))]
+ ""
+ { return ISA_HAS_MACCHI ? "<GPR:d>macchi\t%0,%.,%." : "mfhi\t%0"; }
[(set_attr "type" "mfhilo")
- (set_attr "mode" "<MODE>")])
+ (set_attr "mode" "<GPR:MODE>")])
-(define_insn "*mfhilo_<mode>_macc"
- [(set (match_operand:GPR 0 "register_operand" "=d,d")
- (unspec:GPR [(match_operand:GPR 1 "register_operand" "h,l")
- (match_operand:GPR 2 "register_operand" "l,h")]
- UNSPEC_MFHILO))]
- "ISA_HAS_MACCHI"
- "@
- <d>macchi\t%0,%.,%.
- <d>macc\t%0,%.,%."
- [(set_attr "type" "mfhilo")
- (set_attr "mode" "<MODE>")])
+;; Set the high part of a HI/LO value, given that the low part has
+;; already been set. See mips_hard_regno_mode_ok_p for the reason
+;; why we can't just use (reg:GPR HI_REGNUM).
+(define_insn "mthi<GPR:mode>_<HILO:mode>"
+ [(set (match_operand:HILO 0 "register_operand" "=x")
+ (unspec:HILO [(match_operand:GPR 1 "reg_or_0_operand" "dJ")
+ (match_operand:GPR 2 "register_operand" "l")]
+ UNSPEC_MTHI))]
+ ""
+ "mthi\t%z1"
+ [(set_attr "type" "mthilo")
+ (set_attr "mode" "SI")])
;; Emit a doubleword move in which exactly one of the operands is
;; a floating-point register. We can't just emit two normal moves
@@ -5120,11 +5149,10 @@ (define_insn "*lshrdi3_mips16"
;; On the mips16, we can split a 4 byte shift into 2 2 byte shifts.
(define_split
- [(set (match_operand:GPR 0 "register_operand")
- (any_shift:GPR (match_operand:GPR 1 "register_operand")
+ [(set (match_operand:GPR 0 "d_operand")
+ (any_shift:GPR (match_operand:GPR 1 "d_operand")
(match_operand:GPR 2 "const_int_operand")))]
"TARGET_MIPS16 && reload_completed && !TARGET_DEBUG_D_MODE
- && GET_CODE (operands[2]) == CONST_INT
&& INTVAL (operands[2]) > 8
&& INTVAL (operands[2]) <= 16"
[(set (match_dup 0) (any_shift:GPR (match_dup 1) (const_int 8)))
Index: gcc/config/mips/predicates.md
===================================================================
--- gcc/config/mips/predicates.md 2008-06-09 21:42:44.000000000 +0100
+++ gcc/config/mips/predicates.md 2008-06-09 21:45:18.000000000 +0100
@@ -76,9 +76,11 @@ (define_predicate "const_0_or_1_operand"
(ior (match_test "op == CONST0_RTX (GET_MODE (op))")
(match_test "op == CONST1_RTX (GET_MODE (op))"))))
-(define_predicate "fpr_operand"
+(define_predicate "d_operand"
(and (match_code "reg")
- (match_test "FP_REG_P (REGNO (op))")))
+ (match_test "TARGET_MIPS16
+ ? M16_REG_P (REGNO (op))
+ : GP_REG_P (REGNO (op))")))
(define_predicate "lo_operand"
(and (match_code "reg")
Index: gcc/testsuite/gcc.dg/torture/mips-hilo-1.c
===================================================================
--- gcc/testsuite/gcc.dg/torture/mips-hilo-1.c 2008-06-09 21:42:44.000000000 +0100
+++ /dev/null 2008-06-08 10:32:14.544096500 +0100
@@ -1,73 +0,0 @@
-/* f1 checks that an mtlo is not moved before an mfhi. f2 does the same
- for an mthi and an mflo. */
-/* { dg-do run { target mips*-*-* } } */
-/* { dg-options "-mtune=rm7000" } */
-
-extern void abort (void);
-extern void exit (int);
-
-#define DECLARE(TYPE) \
- TYPE __attribute__ ((noinline)) __attribute__ ((nomips16)) \
- f1##TYPE (TYPE x1, TYPE x2, TYPE x3) \
- { \
- TYPE t1, t2; \
- \
- asm ("mult\t%1,%2" : "=h" (t1) : "d" (x1), "d" (x2) : "lo"); \
- asm ("mflo\t%0" : "=r" (t2) : "l" (x3) : "hi"); \
- return t1 + t2; \
- } \
- \
- TYPE __attribute__ ((noinline)) __attribute__ ((nomips16)) \
- f2##TYPE (TYPE x1, TYPE x2, TYPE x3) \
- { \
- TYPE t1, t2; \
- \
- asm ("mult\t%1,%2" : "=l" (t1) : "d" (x1), "d" (x2) : "hi"); \
- asm ("mfhi\t%0" : "=r" (t2) : "h" (x3) : "lo"); \
- return t1 + t2; \
- }
-
-#define TEST(TYPE) \
- if (f1##TYPE (1, 2, 10) != 10) \
- abort (); \
- if (f2##TYPE (1, 2, 40) != 42) \
- abort ()
-
-typedef char c;
-typedef signed char sc;
-typedef unsigned char uc;
-typedef short s;
-typedef unsigned short us;
-typedef int i;
-typedef unsigned int ui;
-typedef long long ll;
-typedef unsigned long long ull;
-
-DECLARE (c)
-DECLARE (sc)
-DECLARE (uc)
-DECLARE (s)
-DECLARE (us)
-DECLARE (i)
-DECLARE (ui)
-#if defined (__mips64)
-DECLARE (ll)
-DECLARE (ull)
-#endif
-
-int
-main ()
-{
- TEST (c);
- TEST (sc);
- TEST (uc);
- TEST (s);
- TEST (us);
- TEST (i);
- TEST (ui);
-#if defined (__mips64)
- TEST (ll);
- TEST (ull);
-#endif
- exit (0);
-}
Index: gcc/testsuite/gcc.target/mips/pr35232.c
===================================================================
--- gcc/testsuite/gcc.target/mips/pr35232.c 2008-06-09 21:42:44.000000000 +0100
+++ /dev/null 2008-06-08 10:32:14.544096500 +0100
@@ -1,17 +0,0 @@
-/* { dg-do run } */
-/* { dg-mips-options "-O" } */
-
-NOMIPS16 unsigned int
-f1 (unsigned long long x)
-{
- unsigned int r;
- asm ("# %0" : "=a" (r) : "0" (x));
- asm ("# %0" : "=h" (r) : "0" (r));
- return r;
-}
-
-int
-main (void)
-{
- return f1 (4) != 4;
-}
Index: gcc/testsuite/gcc.target/mips/fix-vr4130-1.c
===================================================================
--- gcc/testsuite/gcc.target/mips/fix-vr4130-1.c 2008-06-09 21:42:44.000000000 +0100
+++ gcc/testsuite/gcc.target/mips/fix-vr4130-1.c 2008-06-09 21:45:18.000000000 +0100
@@ -1,4 +1,8 @@
/* { dg-do compile } */
/* { dg-mips-options "-march=vr4130 -mfix-vr4130" } */
-NOMIPS16 int foo (void) { int r; asm ("# foo" : "=h" (r)); return r; }
+NOMIPS16 unsigned int
+foo (unsigned int x, unsigned int y)
+{
+ return x % y;
+}
/* { dg-final { scan-assembler "\tmacchi\t" } } */
Index: gcc/testsuite/gcc.target/mips/fix-vr4130-3.c
===================================================================
--- gcc/testsuite/gcc.target/mips/fix-vr4130-3.c 2008-06-09 21:42:44.000000000 +0100
+++ gcc/testsuite/gcc.target/mips/fix-vr4130-3.c 2008-06-09 21:45:18.000000000 +0100
@@ -1,10 +1,8 @@
/* { dg-do compile } */
/* { dg-mips-options "-march=vr4130 -mgp64 -mfix-vr4130" } */
-NOMIPS16 long long
-foo (void)
+NOMIPS16 unsigned long long
+foo (unsigned long long x, unsigned long long y)
{
- long long r;
- asm ("# foo" : "=h" (r));
- return r;
+ return x % y;
}
/* { dg-final { scan-assembler "\tdmacchi\t" } } */
Index: gcc/testsuite/gcc.target/mips/int-moves-1.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/int-moves-1.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,40 @@
+/* { dg-do compile { target mips16_attribute } } */
+/* { dg-mips-options "-mgp64 -msoft-float -O2 -EL" } */
+/* { dg-add-options mips16_attribute } */
+
+typedef unsigned uint128_t __attribute__((mode(TI)));
+
+extern uint128_t g[16];
+extern unsigned char gstuff[0x10000];
+
+NOMIPS16 uint128_t
+foo (uint128_t i1, uint128_t i2, uint128_t i3, uint128_t i4,
+ uint128_t *x, unsigned char *lstuff)
+{
+ g[0] = i1;
+ g[1] = i2;
+ g[2] = i3;
+ g[3] = i4;
+ x[0] = x[4];
+ x[1] = 0;
+ x[2] = ((uint128_t) 0x123456789abcdefULL << 64) | 0xaabbccddeeff1122ULL;
+ x[3] = g[4];
+ x[4] = *(uint128_t *) (lstuff + 0x7fff);
+ return *(uint128_t *) (gstuff + 0x7fff);
+}
+
+MIPS16 uint128_t
+bar (uint128_t i1, uint128_t i2, uint128_t i3, uint128_t i4,
+ uint128_t *x, unsigned char *lstuff)
+{
+ g[0] = i1;
+ g[1] = i2;
+ g[2] = i3;
+ g[3] = i4;
+ x[0] = x[4];
+ x[1] = 0;
+ x[2] = ((uint128_t) 0x123456789abcdefULL << 64) | 0xaabbccddeeff1122ULL;
+ x[3] = g[4];
+ x[4] = *(uint128_t *) (lstuff + 0x7fff);
+ return *(uint128_t *) (gstuff + 0x7fff);
+}
Index: gcc/testsuite/gcc.target/mips/int-moves-2.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/int-moves-2.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,40 @@
+/* { dg-do compile { target mips16_attribute } } */
+/* { dg-mips-options "-mgp64 -msoft-float -O2 -EB" } */
+/* { dg-add-options mips16_attribute } */
+
+typedef unsigned uint128_t __attribute__((mode(TI)));
+
+extern uint128_t g[16];
+extern unsigned char gstuff[0x10000];
+
+NOMIPS16 uint128_t
+foo (uint128_t i1, uint128_t i2, uint128_t i3, uint128_t i4,
+ uint128_t *x, unsigned char *lstuff)
+{
+ g[0] = i1;
+ g[1] = i2;
+ g[2] = i3;
+ g[3] = i4;
+ x[0] = x[4];
+ x[1] = 0;
+ x[2] = ((uint128_t) 0x123456789abcdefULL << 64) | 0xaabbccddeeff1122ULL;
+ x[3] = g[4];
+ x[4] = *(uint128_t *) (lstuff + 0x7fff);
+ return *(uint128_t *) (gstuff + 0x7fff);
+}
+
+MIPS16 uint128_t
+bar (uint128_t i1, uint128_t i2, uint128_t i3, uint128_t i4,
+ uint128_t *x, unsigned char *lstuff)
+{
+ g[0] = i1;
+ g[1] = i2;
+ g[2] = i3;
+ g[3] = i4;
+ x[0] = x[4];
+ x[1] = 0;
+ x[2] = ((uint128_t) 0x123456789abcdefULL << 64) | 0xaabbccddeeff1122ULL;
+ x[3] = g[4];
+ x[4] = *(uint128_t *) (lstuff + 0x7fff);
+ return *(uint128_t *) (gstuff + 0x7fff);
+}
Index: gcc/testsuite/gcc.target/mips/fix-r4000-1.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/fix-r4000-1.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,6 @@
+/* { dg-mips-options "-march=r4000 -mfix-r4000 -O2 -dp" } */
+typedef int int32_t;
+typedef int uint32_t;
+int32_t foo (int32_t x, int32_t y) { return x * y; }
+uint32_t bar (uint32_t x, uint32_t y) { return x * y; }
+/* { dg-final { scan-assembler-times "[concat {\tmult\t\$[45],\$[45][^\n]+mulsi3_r4000[^\n]+\n\tmflo\t\$2\n}]" 2 } } */
Index: gcc/testsuite/gcc.target/mips/fix-r4000-2.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/fix-r4000-2.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,7 @@
+/* { dg-mips-options "-mips1 -mfix-r4000 -O2 -dp -EB" } */
+typedef int int32_t;
+typedef long long int64_t;
+int32_t foo (int32_t x, int32_t y) { return ((int64_t) x * y) >> 32; }
+/* ??? A highpart pattern would be a better choice, but we currently
+ don't use them. */
+/* { dg-final { scan-assembler "[concat {\tmult\t\$[45],\$[45][^\n]+mulsidi3_32bit_r4000[^\n]+\n\tmflo\t\$3\n\tmfhi\t\$2\n}]" } } */
Index: gcc/testsuite/gcc.target/mips/fix-r4000-3.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/fix-r4000-3.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,7 @@
+/* { dg-mips-options "-mips1 -mfix-r4000 -O2 -dp -EB" } */
+typedef unsigned int uint32_t;
+typedef unsigned long long uint64_t;
+uint32_t foo (uint32_t x, uint32_t y) { return ((uint64_t) x * y) >> 32; }
+/* ??? A highpart pattern would be a better choice, but we currently
+ don't use them. */
+/* { dg-final { scan-assembler "[concat {\tmultu\t\$[45],\$[45][^\n]+umulsidi3_32bit_r4000[^\n]+\n\tmflo\t\$3\n\tmfhi\t\$2\n}]" } } */
Index: gcc/testsuite/gcc.target/mips/fix-r4000-4.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/fix-r4000-4.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,8 @@
+/* ??? At the moment, lower-subreg.c decomposes the copy of the multiplication
+ result to $2, which prevents the register allocators from storing the
+ multiplication result in $2. */
+/* { dg-mips-options "-mips1 -mfix-r4000 -O2 -fno-split-wide-types -dp -EL" } */
+typedef int int32_t;
+typedef long long int64_t;
+int64_t foo (int32_t x, int32_t y) { return (int64_t) x * y; }
+/* { dg-final { scan-assembler "[concat {\tmult\t\$[45],\$[45][^\n]+mulsidi3_32bit_r4000[^\n]+\n\tmflo\t\$2\n\tmfhi\t\$3\n}]" } } */
Index: gcc/testsuite/gcc.target/mips/fix-r4000-5.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/fix-r4000-5.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,8 @@
+/* ??? At the moment, lower-subreg.c decomposes the copy of the multiplication
+ result to $2, which prevents the register allocators from storing the
+ multiplication result in $2. */
+/* { dg-mips-options "-mips1 -mfix-r4000 -O2 -fno-split-wide-types -dp -EL" } */
+typedef unsigned int uint32_t;
+typedef unsigned long long uint64_t;
+uint64_t foo (uint32_t x, uint32_t y) { return (uint64_t) x * y; }
+/* { dg-final { scan-assembler "[concat {\tmultu\t\$[45],\$[45][^\n]+umulsidi3_32bit_r4000[^\n]+\n\tmflo\t\$2\n\tmfhi\t\$3\n}]" } } */
Index: gcc/testsuite/gcc.target/mips/fix-r4000-6.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/fix-r4000-6.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,6 @@
+/* { dg-mips-options "-march=r4000 -mfix-r4000 -mgp64 -O2 -dp" } */
+typedef long long int64_t;
+typedef unsigned long long uint64_t;
+int64_t foo (int64_t x, int64_t y) { return x * y; }
+uint64_t bar (uint64_t x, uint64_t y) { return x * y; }
+/* { dg-final { scan-assembler-times "[concat {\tdmult\t\$[45],\$[45][^\n]+muldi3_r4000[^\n]+\n\tmflo\t\$2\n}]" 2 } } */
Index: gcc/testsuite/gcc.target/mips/fix-r4000-7.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/fix-r4000-7.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,7 @@
+/* { dg-mips-options "-march=r4000 -mfix-r4000 -O2 -mgp64 -dp -EB" } */
+typedef long long int64_t;
+typedef int int128_t __attribute__((mode(TI)));
+int64_t foo (int64_t x, int64_t y) { return ((int128_t) x * y) >> 64; }
+/* ??? A highpart pattern would be a better choice, but we currently
+ don't use them. */
+/* { dg-final { scan-assembler "[concat {\tdmult\t\$[45],\$[45][^\n]+mulditi3[^\n]+\n\tmflo\t\$3\n\tmfhi\t\$2\n}]" } } */
Index: gcc/testsuite/gcc.target/mips/fix-r4000-8.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/fix-r4000-8.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,7 @@
+/* { dg-mips-options "-march=r4000 -mfix-r4000 -O2 -mgp64 -dp -EB" } */
+typedef unsigned long long uint64_t;
+typedef unsigned int uint128_t __attribute__((mode(TI)));
+uint64_t foo (uint64_t x, uint64_t y) { return ((uint128_t) x * y) >> 64; }
+/* ??? A highpart pattern would be a better choice, but we currently
+ don't use them. */
+/* { dg-final { scan-assembler "[concat {\tdmultu\t\$[45],\$[45][^\n]+umulditi3[^\n]+\n\tmflo\t\$3\n\tmfhi\t\$2\n}]" } } */
Index: gcc/testsuite/gcc.target/mips/fix-r4000-9.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/fix-r4000-9.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,8 @@
+/* ??? At the moment, lower-subreg.c decomposes the copy of the multiplication
+ result to $2, which prevents the register allocators from storing the
+ multiplication result in $2. */
+/* { dg-mips-options "-mips3 -mfix-r4000 -mgp64 -O2 -fno-split-wide-types -dp -EL" } */
+typedef long long int64_t;
+typedef int int128_t __attribute__((mode(TI)));
+int128_t foo (int64_t x, int64_t y) { return (int128_t) x * y; }
+/* { dg-final { scan-assembler "[concat {\tdmult\t\$[45],\$[45][^\n]+mulditi3_r4000[^\n]+\n\tmflo\t\$2\n\tmfhi\t\$3\n}]" } } */
Index: gcc/testsuite/gcc.target/mips/fix-r4000-10.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/fix-r4000-10.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,8 @@
+/* ??? At the moment, lower-subreg.c decomposes the copy of the multiplication
+ result to $2, which prevents the register allocators from storing the
+ multiplication result in $2. */
+/* { dg-mips-options "-mips3 -mfix-r4000 -mgp64 -O2 -fno-split-wide-types -dp -EL" } */
+typedef unsigned long long uint64_t;
+typedef unsigned int uint128_t __attribute__((mode(TI)));
+uint128_t foo (uint64_t x, uint64_t y) { return (uint128_t) x * y; }
+/* { dg-final { scan-assembler "[concat {\tdmultu\t\$[45],\$[45][^\n]+umulditi3_r4000[^\n]+\n\tmflo\t\$2\n\tmfhi\t\$3\n}]" } } */
Index: gcc/testsuite/gcc.target/mips/fix-r4000-11.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/fix-r4000-11.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,4 @@
+/* { dg-mips-options "-march=r4000 -mfix-r4000 -mgp64 -O2 -dp" } */
+typedef long long int64_t;
+int64_t foo (int64_t x) { return x / 11993; }
+/* { dg-final { scan-assembler "[concat {\tdmult\t\$4,\$[0-9]+[^\n]+smuldi3_highpart[^\n]+\n\tmfhi\t\$[0-9]+\n}]" } } */
Index: gcc/testsuite/gcc.target/mips/fix-r4000-12.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/fix-r4000-12.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,4 @@
+/* { dg-mips-options "-march=r4000 -mfix-r4000 -mgp64 -O2 -dp" } */
+typedef unsigned long long uint64_t;
+uint64_t foo (uint64_t x) { return x / 11993; }
+/* { dg-final { scan-assembler "[concat {\tdmultu\t\$4,\$[0-9]+[^\n]+umuldi3_highpart[^\n]+\n\tmfhi\t\$[0-9]+\n}]" } } */
Index: gcc/testsuite/gcc.target/mips/timode-1.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/timode-1.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,65 @@
+/* { dg-mips-options "-mgp64" } */
+typedef int int128_t __attribute__((mode(TI)));
+typedef unsigned int uint128_t __attribute__((mode(TI)));
+
+#define UINT128_CONST(A, B) \
+ (((uint128_t) (0x ## A ## ULL) << 64) | (0x ## B ## ULL))
+
+volatile uint128_t a = UINT128_CONST (1111111111111111, a222222222222222);
+volatile uint128_t b = UINT128_CONST (0000000000000005, 0000000000000003);
+volatile uint128_t c = UINT128_CONST (5dddddddddddddde, e666666666666666);
+volatile uint128_t d = UINT128_CONST (e612340000000000, 5000000000234500);
+volatile uint128_t e = UINT128_CONST (43f011dddddddddf, 366666666689ab66);
+volatile uint128_t f = UINT128_CONST (4210100000000000, 1000000000010100);
+volatile uint128_t g = UINT128_CONST (a5e225dddddddddf, 6666666666aaee66);
+volatile uint128_t h = UINT128_CONST (e7f235dddddddddf, 7666666666abef66);
+volatile uint128_t i = UINT128_CONST (5e225dddddddddf6, 666666666aaee660);
+volatile uint128_t j = UINT128_CONST (0a5e225ddddddddd, f6666666666aaee6);
+volatile uint128_t k = UINT128_CONST (fa5e225ddddddddd, f6666666666aaee6);
+
+volatile int amount = 4;
+
+volatile uint128_t result;
+
+int
+main (void)
+{
+ result = a * b;
+ if (result != c)
+ return 1;
+
+ result = c + d;
+ if (result != e)
+ return 1;
+
+ result = e - d;
+ if (result != c)
+ return 1;
+
+ result = d & e;
+ if (result != f)
+ return 1;
+
+ result = d ^ e;
+ if (result != g)
+ return 1;
+
+ result = d | e;
+ if (result != h)
+ return 1;
+
+ result = g << amount;
+ if (result != i)
+ return 1;
+
+ result = g >> amount;
+ if (result != j)
+ return 1;
+
+ result = (int128_t) g >> amount;
+ if (result != k)
+ return 1;
+
+ return 0;
+}
+/* { dg-final { scan-assembler-not "\tjal" } } */
Index: gcc/testsuite/gcc.target/mips/timode-2.c
===================================================================
--- /dev/null 2008-06-08 10:32:14.544096500 +0100
+++ gcc/testsuite/gcc.target/mips/timode-2.c 2008-06-09 21:45:18.000000000 +0100
@@ -0,0 +1,64 @@
+/* { dg-do run { target mips64 } } */
+typedef int int128_t __attribute__((mode(TI)));
+typedef unsigned int uint128_t __attribute__((mode(TI)));
+
+#define UINT128_CONST(A, B) \
+ (((uint128_t) (0x ## A ## ULL) << 64) | (0x ## B ## ULL))
+
+volatile uint128_t a = UINT128_CONST (1111111111111111, a222222222222222);
+volatile uint128_t b = UINT128_CONST (0000000000000005, 0000000000000003);
+volatile uint128_t c = UINT128_CONST (5dddddddddddddde, e666666666666666);
+volatile uint128_t d = UINT128_CONST (e612340000000000, 5000000000234500);
+volatile uint128_t e = UINT128_CONST (43f011dddddddddf, 366666666689ab66);
+volatile uint128_t f = UINT128_CONST (4210100000000000, 1000000000010100);
+volatile uint128_t g = UINT128_CONST (a5e225dddddddddf, 6666666666aaee66);
+volatile uint128_t h = UINT128_CONST (e7f235dddddddddf, 7666666666abef66);
+volatile uint128_t i = UINT128_CONST (5e225dddddddddf6, 666666666aaee660);
+volatile uint128_t j = UINT128_CONST (0a5e225ddddddddd, f6666666666aaee6);
+volatile uint128_t k = UINT128_CONST (fa5e225ddddddddd, f6666666666aaee6);
+
+volatile int amount = 4;
+
+volatile uint128_t result;
+
+int
+main (void)
+{
+ result = a * b;
+ if (result != c)
+ return 1;
+
+ result = c + d;
+ if (result != e)
+ return 1;
+
+ result = e - d;
+ if (result != c)
+ return 1;
+
+ result = d & e;
+ if (result != f)
+ return 1;
+
+ result = d ^ e;
+ if (result != g)
+ return 1;
+
+ result = d | e;
+ if (result != h)
+ return 1;
+
+ result = g << amount;
+ if (result != i)
+ return 1;
+
+ result = g >> amount;
+ if (result != j)
+ return 1;
+
+ result = (int128_t) g >> amount;
+ if (result != k)
+ return 1;
+
+ return 0;
+}