This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
[PATCH, ADA] Typos in source code comments [6/7]
- From: Ralf Wildenhues <Ralf dot Wildenhues at gmx dot de>
- To: gcc-patches at gcc dot gnu dot org
- Date: Sun, 13 Apr 2008 19:26:22 +0200
- Subject: [PATCH, ADA] Typos in source code comments [6/7]
Bootstrap and check-ada succeeded. OK for trunk?
Thanks,
Ralf
gcc/ada/ChangeLog:
2008-04-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* sem_ch10.adb, sem_ch10.ads,
sem_ch12.adb, sem_ch12.ads, sem_ch13.adb, sem_ch13.ads,
sem_ch3.adb, sem_ch4.adb, sem_ch5.adb, sem_ch6.adb,
sem_ch6.ads, sem_ch8.adb, sem_ch8.ads, sem_ch9.adb,
sem_elab.adb, sem_elab.ads, sem_elim.ads, sem_eval.adb,
sem_eval.ads, sem_intr.adb, sem_mech.adb, sem_mech.ads,
sem_prag.adb, sem_prag.ads, sem_res.adb, sem_res.ads,
sem_type.adb, sem_util.adb, sem_util.ads, sem_warn.adb:
Fix comment typos.
diff --git a/gcc/ada/sem_ch10.adb b/gcc/ada/sem_ch10.adb
index bd9b574..637e153 100644
--- a/gcc/ada/sem_ch10.adb
+++ b/gcc/ada/sem_ch10.adb
@@ -489,7 +489,7 @@ package body Sem_Ch10 is
-- Avoid checking implicitly generated with clauses, limited
-- with clauses or withs that have pragma Elaborate or
- -- Elaborate_All apllied.
+ -- Elaborate_All applied.
if Nkind (Clause) = N_With_Clause
and then not Implicit_With (Clause)
@@ -633,7 +633,7 @@ package body Sem_Ch10 is
-- level (i.e. this subunit will be handled on the way down from the
-- parent), so at this level we immediately return. If the subunit
-- ends up not analyzed, it means that the parent did not contain a
- -- stub for it, or that there errors were dectected in some ancestor.
+ -- stub for it, or that there errors were detected in some ancestor.
if Nkind (Unit_Node) = N_Subunit
and then not Analyzed (Lib_Unit)
@@ -928,7 +928,7 @@ package body Sem_Ch10 is
Remove_Unit_From_Visibility (Defining_Entity (Unit_Node));
-- If the unit is an instantiation whose body will be elaborated for
- -- inlining purposes, use the the proper entity of the instance. The
+ -- inlining purposes, use the proper entity of the instance. The
-- entity may be missing if the instantiation was illegal.
elsif Nkind (Unit_Node) = N_Package_Instantiation
@@ -1101,7 +1101,7 @@ package body Sem_Ch10 is
or else Is_Preelaborated (Spec_Id)
- -- No checks needed if pagma Elaborate_Body present
+ -- No checks needed if pragma Elaborate_Body present
or else Has_Pragma_Elaborate_Body (Spec_Id)
@@ -1275,7 +1275,7 @@ package body Sem_Ch10 is
and then not Limited_Present (Item)
then
-- Skip analyzing with clause if no unit, nothing to do (this
- -- happens for a with that references a non-existant unit)
+ -- happens for a with that references a non-existent unit)
if Present (Library_Unit (Item)) then
Analyze (Item);
@@ -1757,7 +1757,7 @@ package body Sem_Ch10 is
begin
Check_Stub_Level (N);
- -- First occurence of name may have been as an incomplete type
+ -- First occurrence of name may have been as an incomplete type
if Present (Nam) and then Ekind (Nam) = E_Incomplete_Type then
Nam := Full_View (Nam);
@@ -2165,7 +2165,7 @@ package body Sem_Ch10 is
begin
Check_Stub_Level (N);
- -- First occurence of name may have been as an incomplete type
+ -- First occurrence of name may have been as an incomplete type
if Present (Nam) and then Ekind (Nam) = E_Incomplete_Type then
Nam := Full_View (Nam);
@@ -2660,7 +2660,7 @@ package body Sem_Ch10 is
P : Node_Id;
function Build_Unit_Name (Nam : Node_Id) return Node_Id;
- -- Comment requireed here ???
+ -- Comment required here ???
---------------------
-- Build_Unit_Name --
@@ -5477,7 +5477,7 @@ package body Sem_Ch10 is
Next_Entity (E);
end loop;
- -- If the previous search was not sucessful then the entity
+ -- If the previous search was not successful then the entity
-- to be restored in the homonym list is the non-limited view
if E = First_Private_Entity (P) then
diff --git a/gcc/ada/sem_ch10.ads b/gcc/ada/sem_ch10.ads
index 9f6543b..066ceec 100644
--- a/gcc/ada/sem_ch10.ads
+++ b/gcc/ada/sem_ch10.ads
@@ -6,7 +6,7 @@
-- --
-- S p e c --
-- --
--- Copyright (C) 1992-2007, Free Software Foundation, Inc. --
+-- Copyright (C) 1992-2008, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
@@ -56,7 +56,7 @@ package Sem_Ch10 is
-- private part of a nested package, even if this package appears in
-- the visible part of the enclosing compilation unit. This Ada 2005
-- rule imposes extra steps in order to install/remove the private_with
- -- clauses of the an enclosing unit.
+ -- clauses of an enclosing unit.
procedure Load_Needed_Body (N : Node_Id; OK : out Boolean);
-- Load and analyze the body of a context unit that is generic, or
diff --git a/gcc/ada/sem_ch12.adb b/gcc/ada/sem_ch12.adb
index 00c9f39..8728bfe 100644
--- a/gcc/ada/sem_ch12.adb
+++ b/gcc/ada/sem_ch12.adb
@@ -111,7 +111,7 @@ package body Sem_Ch12 is
-- b) Each instantiation copies the original tree, and inserts into it a
-- series of declarations that describe the mapping between generic formals
-- and actuals. For example, a generic In OUT parameter is an object
- -- renaming of the corresponing actual, etc. Generic IN parameters are
+ -- renaming of the corresponding actual, etc. Generic IN parameters are
-- constant declarations.
-- c) In order to give the right visibility for these renamings, we use
@@ -465,7 +465,7 @@ package body Sem_Ch12 is
function Is_Generic_Formal (E : Entity_Id) return Boolean;
-- Utility to determine whether a given entity is declared by means of
- -- of a formal parameter declaration. Used to set properly the visiblity
+ -- of a formal parameter declaration. Used to set properly the visibility
-- of generic formals of a generic package declared with a box or with
-- partial parametrization.
@@ -666,7 +666,7 @@ package body Sem_Ch12 is
--
-- Nodes that are selected components in the parse tree may be rewritten
-- as expanded names after resolution, and must be treated as potential
- -- entity holders. which is why they also have an Associated_Node.
+ -- entity holders, which is why they also have an Associated_Node.
--
-- Nodes that do not come from source, such as freeze nodes, do not appear
-- in the generic tree, and need not have an associated node.
@@ -802,7 +802,7 @@ package body Sem_Ch12 is
(Pack_Id : Entity_Id;
Is_Package : Boolean := True);
-- Restore the private views of external types, and unmark the generic
- -- renamings of actuals, so that they become comptible subtypes again.
+ -- renamings of actuals, so that they become compatible subtypes again.
-- For subprograms, Pack_Id is the package constructed to hold the
-- renamings.
@@ -882,7 +882,7 @@ package body Sem_Ch12 is
Default_Formals : constant List_Id := New_List;
-- If an Other_Choice is present, some of the formals may be defaulted.
- -- To simplify the treatement of visibility in an instance, we introduce
+ -- To simplify the treatment of visibility in an instance, we introduce
-- individual defaults for each such formal. These defaults are
-- appended to the list of associations and replace the Others_Choice.
@@ -1442,8 +1442,8 @@ package body Sem_Ch12 is
end loop;
end;
- -- If this is a formal package. normalize the parameter list by adding
- -- explicit box asssociations for the formals that are covered by an
+ -- If this is a formal package, normalize the parameter list by adding
+ -- explicit box associations for the formals that are covered by an
-- Others_Choice.
if not Is_Empty_List (Default_Formals) then
@@ -1967,7 +1967,7 @@ package body Sem_Ch12 is
-- The formal package is rewritten so that its parameters are replaced
-- with corresponding declarations. For parameters with bona fide
-- associations these declarations are created by Analyze_Associations
- -- as for aa regular instantiation. For boxed parameters, we preserve
+ -- as for a regular instantiation. For boxed parameters, we preserve
-- the formal declarations and analyze them, in order to introduce
-- entities of the right kind in the environment of the formal.
@@ -3180,7 +3180,7 @@ package body Sem_Ch12 is
-- body to instantiate until the enclosing generic is instantiated
-- and there is an actual for the formal package. If the formal
-- package has parameters, we build a regular package instance for
- -- it, that preceeds the original formal package declaration.
+ -- it, that precedes the original formal package declaration.
if In_Open_Scopes (Scope (Scope (Gen_Unit))) then
declare
@@ -3338,8 +3338,9 @@ package body Sem_Ch12 is
-- on current node so context is complete for analysis (including
-- nested instantiations). If this is the main unit, the declaration
-- eventually replaces the instantiation node. If the instance body
- -- is later created, it replaces the instance node, and the declation
- -- is attached to it (see Build_Instance_Compilation_Unit_Nodes).
+ -- is created later, it replaces the instance node, and the
+ -- declaration is attached to it (see
+ -- Build_Instance_Compilation_Unit_Nodes).
else
if Cunit_Entity (Current_Sem_Unit) = Defining_Entity (N) then
@@ -3535,7 +3536,7 @@ package body Sem_Ch12 is
-- removed previously.
-- If current scope is the body of a child unit, remove context of
- -- spec as well. If an enclosing scope is an instance body. the
+ -- spec as well. If an enclosing scope is an instance body, the
-- context has already been removed, but the entities in the body
-- must be made invisible as well.
@@ -4514,7 +4515,7 @@ package body Sem_Ch12 is
if No (E1) then
return;
- -- If the formal entity comes from a formal declaration. it was
+ -- If the formal entity comes from a formal declaration, it was
-- defaulted in the formal package, and no check is needed on it.
elsif Nkind (Parent (E2)) = N_Formal_Object_Declaration then
@@ -4701,7 +4702,7 @@ package body Sem_Ch12 is
begin
-- The instantiation appears before the generic body if we are in the
-- scope of the unit containing the generic, either in its spec or in
- -- the package body. and before the generic body.
+ -- the package body, and before the generic body.
if Ekind (Gen_Comp) = E_Package_Body then
Gen_Comp := Spec_Entity (Gen_Comp);
@@ -5777,7 +5778,7 @@ package body Sem_Ch12 is
-- If we are not instantiating, then this is where we load and
-- analyze subunits, i.e. at the point where the stub occurs. A
- -- more permissivle system might defer this analysis to the point
+ -- more permissible system might defer this analysis to the point
-- of instantiation, but this seems to complicated for now.
if not Instantiating then
@@ -5796,7 +5797,7 @@ package body Sem_Ch12 is
Error_Node => N);
-- If the proper body is not found, a warning message will be
- -- emitted when analyzing the stub, or later at the the point
+ -- emitted when analyzing the stub, or later at the point
-- of instantiation. Here we just leave the stub as is.
if Unum = No_Unit then
@@ -5863,7 +5864,7 @@ package body Sem_Ch12 is
-- unit field of N points to the parent unit (which is a compilation
-- unit) and need not (and cannot!) be copied.
- -- When the proper body of the stub is analyzed, thie library_unit link
+ -- When the proper body of the stub is analyzed, the library_unit link
-- is used to establish the proper context (see sem_ch10).
-- The other fields of a compilation unit are copied as usual
@@ -6253,7 +6254,7 @@ package body Sem_Ch12 is
end loop;
end Find_Depth;
- -- Start of procesing for Earlier
+ -- Start of processing for Earlier
begin
Find_Depth (P1, D1);
@@ -6370,7 +6371,7 @@ package body Sem_Ch12 is
begin
-- If the instance and the generic body appear within the same unit, and
- -- the instance preceeds the generic, the freeze node for the instance
+ -- the instance precedes the generic, the freeze node for the instance
-- must appear after that of the generic. If the generic is nested
-- within another instance I2, then current instance must be frozen
-- after I2. In both cases, the freeze nodes are those of enclosing
@@ -6775,7 +6776,7 @@ package body Sem_Ch12 is
-- The inherited context is attached to the enclosing compilation
-- unit. This is either the main unit, or the declaration for the
- -- main unit (in case the instantation appears within the package
+ -- main unit (in case the instantiation appears within the package
-- declaration and the main unit is its body).
Current_Unit := Parent (Inst);
@@ -7260,7 +7261,7 @@ package body Sem_Ch12 is
Actual_Ent : Entity_Id);
-- Associates the formal entity with the actual. In the case
-- where Formal_Ent is a formal package, this procedure iterates
- -- through all of its formals and enters associations betwen the
+ -- through all of its formals and enters associations between the
-- actuals occurring in the formal package's corresponding actual
-- package (given by Actual_Ent) and the formal package's formal
-- parameters. This procedure recurses if any of the parameters is
@@ -7277,7 +7278,7 @@ package body Sem_Ch12 is
procedure Map_Entities (Form : Entity_Id; Act : Entity_Id);
-- Within the generic part, entities in the formal package are
-- visible. To validate subsequent type declarations, indicate
- -- the correspondence betwen the entities in the analyzed formal,
+ -- the correspondence between the entities in the analyzed formal,
-- and the entities in the actual package. There are three packages
-- involved in the instantiation of a formal package: the parent
-- generic P1 which appears in the generic declaration, the fake
@@ -8621,7 +8622,7 @@ package body Sem_Ch12 is
("cannot find body of generic package &", Inst_Node, Gen_Unit);
-- Don't attempt to perform any cleanup actions if some other error
- -- was aready detected, since this can cause blowups.
+ -- was already detected, since this can cause blowups.
else
return;
@@ -8646,7 +8647,7 @@ package body Sem_Ch12 is
Build_Elaboration_Entity (Parent (Inst_Node), Act_Decl_Id);
-- If the instantiation is not a library unit, then append the
- -- declaration to the list of implicitly generated entities. unless
+ -- declaration to the list of implicitly generated entities, unless
-- it is already a list member which means that it was already
-- processed
@@ -8715,7 +8716,7 @@ package body Sem_Ch12 is
Set_Has_Completion (Anon_Id);
return;
- -- For other cases, commpile the body
+ -- For other cases, compile the body
else
Load_Parent_Of_Generic
@@ -8770,7 +8771,7 @@ package body Sem_Ch12 is
Check_Generic_Actuals (Pack_Id, False);
-- Generate a reference to link the visible subprogram instance to
- -- the the generic body, which for navigation purposes is the only
+ -- the generic body, which for navigation purposes is the only
-- available source for the instance.
Generate_Reference
@@ -9386,7 +9387,7 @@ package body Sem_Ch12 is
Abandon_Instantiation (Actual);
end if;
- -- Ada 2005 (AI-443): Synchronized formal derived type ckecks. Note
+ -- Ada 2005 (AI-443): Synchronized formal derived type checks. Note
-- that the formal type declaration has been rewritten as a private
-- extension.
@@ -10709,7 +10710,7 @@ package body Sem_Ch12 is
-- Within a nested instantiation, a defaulted actual is an empty
-- association, so nothing to analyze. If the subprogram actual
- -- isan attribute, analyze prefix only, because actual is not a
+ -- is an attribute, analyze prefix only, because actual is not a
-- complete attribute reference.
-- If actual is an allocator, analyze expression only. The full
@@ -11018,7 +11019,7 @@ package body Sem_Ch12 is
-- package itself. If the instance is a subprogram, all entities
-- in the corresponding package are renamings. If this entity is
-- a formal package, make its own formals private as well. The
- -- actual in this case is itself the renaming of an instantation.
+ -- actual in this case is itself the renaming of an instantiation.
-- If the entity is not a package renaming, it is the entity
-- created to validate formal package actuals: ignore.
@@ -11467,7 +11468,7 @@ package body Sem_Ch12 is
Next (Act2);
end loop;
- -- Find the associations added for default suprograms
+ -- Find the associations added for default subprograms
if Present (Act2) then
while Nkind (Act2) /= N_Generic_Association
diff --git a/gcc/ada/sem_ch12.ads b/gcc/ada/sem_ch12.ads
index 689e597..7ebb2e8 100644
--- a/gcc/ada/sem_ch12.ads
+++ b/gcc/ada/sem_ch12.ads
@@ -130,7 +130,7 @@ package Sem_Ch12 is
-- an inlined body (so that errout can distinguish cases for generating
-- error messages, otherwise the treatment is identical). In this call
-- N is the subprogram body and E is the defining identifier of the
- -- subprogram in quiestion. The resulting Sloc adjustment factor is
+ -- subprogram in question. The resulting Sloc adjustment factor is
-- saved as part of the internal state of the Sem_Ch12 package for use
-- in subsequent calls to copy nodes.
diff --git a/gcc/ada/sem_ch13.adb b/gcc/ada/sem_ch13.adb
index 1b6eece..93d6627 100644
--- a/gcc/ada/sem_ch13.adb
+++ b/gcc/ada/sem_ch13.adb
@@ -67,13 +67,13 @@ package body Sem_Ch13 is
procedure Alignment_Check_For_Esize_Change (Typ : Entity_Id);
-- This routine is called after setting the Esize of type entity Typ.
- -- The purpose is to deal with the situation where an aligment has been
+ -- The purpose is to deal with the situation where an alignment has been
-- inherited from a derived type that is no longer appropriate for the
-- new Esize value. In this case, we reset the Alignment to unknown.
procedure Check_Component_Overlap (C1_Ent, C2_Ent : Entity_Id);
-- Given two entities for record components or discriminants, checks
- -- if they hav overlapping component clauses and issues errors if so.
+ -- if they have overlapping component clauses and issues errors if so.
function Get_Alignment_Value (Expr : Node_Id) return Uint;
-- Given the expression for an alignment value, returns the corresponding
@@ -118,7 +118,7 @@ package body Sem_Ch13 is
-- call to Validate_Unchecked_Conversions does the actual error
-- checking and posting of warnings. The reason for this delayed
-- processing is to take advantage of back-annotations of size and
- -- alignment values peformed by the back end.
+ -- alignment values performed by the back end.
type UC_Entry is record
Enode : Node_Id; -- node used for posting warnings
@@ -294,7 +294,7 @@ package body Sem_Ch13 is
declare
Comps : array (0 .. Num_CC) of Entity_Id;
- -- Array to collect component and discrimninant entities. The data
+ -- Array to collect component and discriminant entities. The data
-- starts at index 1, the 0'th entry is for the sort routine.
function CP_Lt (Op1, Op2 : Natural) return Boolean;
@@ -1490,7 +1490,7 @@ package body Sem_Ch13 is
-- The Stack_Bounded_Pool is used internally for implementing
-- access types with a Storage_Size. Since it only work
-- properly when used on one specific type, we need to check
- -- that it is not highjacked improperly:
+ -- that it is not hijacked improperly:
-- type T is access Integer;
-- for T'Storage_Size use n;
-- type Q is access Float;
@@ -2394,7 +2394,7 @@ package body Sem_Ch13 is
elsif Present (Component_Clause (Comp)) then
- -- Diagose duplicate rep clause, or check consistency
+ -- Diagnose duplicate rep clause, or check consistency
-- if this is an inherited component. In a double fault,
-- there may be a duplicate inconsistent clause for an
-- inherited component.
@@ -2730,7 +2730,7 @@ package body Sem_Ch13 is
-- For records longer than System.Storage_Unit, and for those where not
-- all components have component clauses, the back end determines the
- -- length (it may for example be appopriate to round up the size
+ -- length (it may for example be appropriate to round up the size
-- to some convenient boundary, based on alignment considerations, etc).
if Unknown_RM_Size (Rectype) and then Hbit + 1 <= 32 then
@@ -3574,7 +3574,7 @@ package body Sem_Ch13 is
-- Signed case. Note that we consider types like range 1 .. -1 to be
-- signed for the purpose of computing the size, since the bounds have
- -- to be accomodated in the base type.
+ -- to be accommodated in the base type.
if Lo < 0 or else Hi < 0 then
S := 1;
@@ -3775,7 +3775,7 @@ package body Sem_Ch13 is
("representation item must be after full type declaration", N);
return True;
- -- If the type has incompleted components, a representation clause is
+ -- If the type has incomplete components, a representation clause is
-- illegal but stream attributes and Convention pragmas are correct.
elsif Has_Private_Component (T) then
@@ -4058,7 +4058,7 @@ package body Sem_Ch13 is
-- For enumeration types, we must check each literal to see if the
-- representation is the same. Note that we do not permit enumeration
- -- reprsentation clauses for Character and Wide_Character, so these
+ -- representation clauses for Character and Wide_Character, so these
-- cases were already dealt with.
elsif Is_Enumeration_Type (T1) then
diff --git a/gcc/ada/sem_ch13.ads b/gcc/ada/sem_ch13.ads
index 204a083..427f836 100644
--- a/gcc/ada/sem_ch13.ads
+++ b/gcc/ada/sem_ch13.ads
@@ -99,7 +99,7 @@ package Sem_Ch13 is
function Rep_Item_Too_Early (T : Entity_Id; N : Node_Id) return Boolean;
-- Called at the start of processing a representation clause or a
-- representation pragma. Used to check that the representation item
- -- is not being applied to an incompleted type or to a generic formal
+ -- is not being applied to an incomplete type or to a generic formal
-- type or a type derived from a generic formal type. Returns False if
-- no such error occurs. If this error does occur, appropriate error
-- messages are posted on node N, and True is returned.
@@ -150,7 +150,7 @@ package Sem_Ch13 is
Act_Unit : Entity_Id);
-- Validate a call to unchecked conversion. N is the node for the actual
-- instantiation, which is used only for error messages. Act_Unit is the
- -- entity for the instantiation, from which the actual types etc for this
+ -- entity for the instantiation, from which the actual types etc. for this
-- instantiation can be determined. This procedure makes an entry in a
-- table and/or generates an N_Validate_Unchecked_Conversion node. The
-- actual checking is done in Validate_Unchecked_Conversions or in the
diff --git a/gcc/ada/sem_ch3.adb b/gcc/ada/sem_ch3.adb
index 00e471a..88ee0d5 100644
--- a/gcc/ada/sem_ch3.adb
+++ b/gcc/ada/sem_ch3.adb
@@ -94,7 +94,7 @@ package body Sem_Ch3 is
-- Parent_Type is the entity for the parent type in the derived type
-- definition and Derived_Type the actual derived type. Is_Completion must
-- be set to False if Derived_Type is the N_Defining_Identifier node in N
- -- (ie Derived_Type = Defining_Identifier (N)). In this case N is not the
+ -- (i.e. Derived_Type = Defining_Identifier (N)). In this case N is not the
-- completion of a private type declaration. If Is_Completion is set to
-- True, N is the completion of a private type declaration and Derived_Type
-- is different from the defining identifier inside N (i.e. Derived_Type /=
@@ -749,7 +749,7 @@ package body Sem_Ch3 is
-- formal part is currently being analyzed, but will be the parent scope
-- in the case of a parameterless function, and we always want to use
-- the function's parent scope. Finally, if the function is a child
- -- unit, we must traverse the the tree to retrieve the proper entity.
+ -- unit, we must traverse the tree to retrieve the proper entity.
elsif Nkind (Related_Nod) = N_Function_Specification
and then Nkind (Parent (N)) /= N_Parameter_Specification
@@ -2030,7 +2030,7 @@ package body Sem_Ch3 is
Set_Primitive_Operations (T, New_Elmt_List);
-- Complete the decoration of the class-wide entity if it was already
- -- built (ie. during the creation of the limited view)
+ -- built (i.e. during the creation of the limited view)
if Present (CW) then
Set_Is_Interface (CW);
@@ -2804,7 +2804,7 @@ package body Sem_Ch3 is
end if;
-- Set Has_Initial_Value if initializing expression present. Note
- -- that if there is no initializating expression, we leave the state
+ -- that if there is no initializing expression, we leave the state
-- of this flag unchanged (usually it will be False, but notably in
-- the case of exception choice variables, it will already be true).
@@ -5969,7 +5969,7 @@ package body Sem_Ch3 is
-- which makes the treatment for T1 and T2 identical.
-- What we want when inheriting S, is that references to D1 and D2 in R are
- -- replaced with references to their correct constraints, ie D1 and D2 in
+ -- replaced with references to their correct constraints, i.e. D1 and D2 in
-- T1 and 1 and X in T2. So all R's discriminant references are replaced
-- with either discriminant references in the derived type or expressions.
-- This replacement is achieved as follows: before inheriting R's
@@ -6049,7 +6049,7 @@ package body Sem_Ch3 is
-- The full view of a private extension is handled exactly as described
-- above. The model chose for the private view of a private extension is
- -- the same for what concerns discriminants (ie they receive the same
+ -- the same for what concerns discriminants (i.e. they receive the same
-- treatment as in the tagged case). However, the private view of the
-- private extension always inherits the components of the parent base,
-- without replacing any discriminant reference. Strictly speaking this is
@@ -7381,7 +7381,7 @@ package body Sem_Ch3 is
-- and therefore when reanalyzing "subtype W is G (D => 1);"
-- which really looks like "subtype W is Rec (D => 1);" at
-- the point of instantiation, we want to find the discriminant
- -- that corresponds to D in Rec, ie X.
+ -- that corresponds to D in Rec, i.e. X.
if Present (Original_Discriminant (Id)) then
Discr := Find_Corresponding_Discriminant (Id, T);
@@ -9193,7 +9193,7 @@ package body Sem_Ch3 is
end if;
-- Allow incomplete declaration of tags (used to handle forward
- -- references to tags). The check on Ada_Tags avoids cicularities
+ -- references to tags). The check on Ada_Tags avoids circularities
-- when rebuilding the compiler.
if RTU_Loaded (Ada_Tags)
diff --git a/gcc/ada/sem_ch4.adb b/gcc/ada/sem_ch4.adb
index 2246399..60d3cd3 100644
--- a/gcc/ada/sem_ch4.adb
+++ b/gcc/ada/sem_ch4.adb
@@ -132,7 +132,7 @@ package body Sem_Ch4 is
-- an invalid selector error message.
function Defined_In_Scope (T : Entity_Id; S : Entity_Id) return Boolean;
- -- Verify that type T is declared in scope S. Used to find intepretations
+ -- Verify that type T is declared in scope S. Used to find interpretations
-- for operators given by expanded names. This is abstracted as a separate
-- function to handle extensions to System, where S is System, but T is
-- declared in the extension.
@@ -1344,7 +1344,7 @@ package body Sem_Ch4 is
if not Is_Overloaded (P) then
if Is_Access_Type (Etype (P)) then
- -- Set the Etype. We need to go thru Is_For_Access_Subtypes to
+ -- Set the Etype. We need to go through Is_For_Access_Subtypes to
-- avoid other problems caused by the Private_Subtype and it is
-- safe to go to the Base_Type because this is the same as
-- converting the access value to its Base_Type.
@@ -2213,7 +2213,7 @@ package body Sem_Ch4 is
(N, Nam, Designated_Type (Subp_Type), Must_Skip);
-- The prefix can also be a parameterless function that returns an
- -- access to subprogram. in which case this is an indirect call.
+ -- access to subprogram, in which case this is an indirect call.
elsif Is_Access_Type (Subp_Type)
and then Ekind (Designated_Type (Subp_Type)) = E_Subprogram_Type
@@ -3195,7 +3195,7 @@ package body Sem_Ch4 is
-- If the prefix is a private extension, check only the visible
-- components of the partial view. This must include the tag,
- -- wich can appear in expanded code in a tag check.
+ -- which can appear in expanded code in a tag check.
if Ekind (Type_To_Use) = E_Record_Type_With_Private
and then Chars (Selector_Name (N)) /= Name_uTag
@@ -3262,7 +3262,7 @@ package body Sem_Ch4 is
Set_Original_Discriminant (Sel, Comp);
end if;
- -- Before declararing an error, check whether this is tagged
+ -- Before declaring an error, check whether this is tagged
-- private type and a call to a primitive operation.
elsif Ada_Version >= Ada_05
@@ -5340,8 +5340,8 @@ package body Sem_Ch4 is
-- is never appropriate, even when Address is defined as a visible
-- Integer type. The reason is that we would really prefer Address
-- to behave as a private type, even in this case, which is there
- -- only to accomodate oddities of VMS address sizes. If Address is
- -- a visible integer type, we get lots of overload ambiguities.
+ -- only to accommodate oddities of VMS address sizes. If Address
+ -- is a visible integer type, we get lots of overload ambiguities.
if Nkind (N) in N_Binary_Op then
declare
diff --git a/gcc/ada/sem_ch5.adb b/gcc/ada/sem_ch5.adb
index c569a28..a1cd552 100644
--- a/gcc/ada/sem_ch5.adb
+++ b/gcc/ada/sem_ch5.adb
@@ -818,7 +818,7 @@ package body Sem_Ch5 is
begin
-- Initialize unblocked exit count for statements of begin block
- -- plus one for each excption handler that is present.
+ -- plus one for each exception handler that is present.
Unblocked_Exit_Count := 1;
@@ -930,7 +930,7 @@ package body Sem_Ch5 is
procedure Non_Static_Choice_Error (Choice : Node_Id);
-- Error routine invoked by the generic instantiation below when
- -- the case statment has a non static choice.
+ -- the case statement has a non static choice.
procedure Process_Statements (Alternative : Node_Id);
-- Analyzes all the statements associated to a case alternative.
diff --git a/gcc/ada/sem_ch6.adb b/gcc/ada/sem_ch6.adb
index 668a2a7..4d566d7 100644
--- a/gcc/ada/sem_ch6.adb
+++ b/gcc/ada/sem_ch6.adb
@@ -112,7 +112,7 @@ package body Sem_Ch6 is
procedure Build_Body_To_Inline (N : Node_Id; Subp : Entity_Id);
-- If a subprogram has pragma Inline and inlining is active, use generic
-- machinery to build an unexpanded body for the subprogram. This body is
- -- subsequenty used for inline expansions at call sites. If subprogram can
+ -- subsequently used for inline expansions at call sites. If subprogram can
-- be inlined (depending on size and nature of local declarations) this
-- function returns true. Otherwise subprogram body is treated normally.
-- If proper warnings are enabled and the subprogram contains a construct
@@ -673,7 +673,7 @@ package body Sem_Ch6 is
then
-- Apply constraint check. Note that this is done before the implicit
-- conversion of the expression done for anonymous access types to
- -- ensure correct generation of the null-excluding check asssociated
+ -- ensure correct generation of the null-excluding check associated
-- with null-excluding expressions found in return statements.
Apply_Constraint_Check (Expr, R_Type);
@@ -998,7 +998,7 @@ package body Sem_Ch6 is
-- The syntactic construct: PREFIX ACTUAL_PARAMETER_PART can denote
-- a procedure call or an entry call. The prefix may denote an access
-- to subprogram type, in which case an implicit dereference applies.
- -- If the prefix is an indexed component (without implicit defererence)
+ -- If the prefix is an indexed component (without implicit dereference)
-- then the construct denotes a call to a member of an entire family.
-- If the prefix is a simple name, it may still denote a call to a
-- parameterless member of an entry family. Resolution of these various
@@ -2200,7 +2200,7 @@ package body Sem_Ch6 is
if Nkind (Ostm) = N_Raise_Statement then
Set_Trivial_Subprogram (Stm);
- -- If null statement, and no following statemennts, turn on flag
+ -- If null statement, and no following statements, turn on flag
elsif Nkind (Stm) = N_Null_Statement
and then Comes_From_Source (Stm)
@@ -3618,7 +3618,7 @@ package body Sem_Ch6 is
begin
-- The algorithm checks every overriding dispatching operation against
-- all the corresponding overridden dispatching operations, detecting
- -- differences in coventions.
+ -- differences in conventions.
Prim_Op_Elmt := First_Elmt (Primitive_Operations (Typ));
while Present (Prim_Op_Elmt) loop
@@ -4260,8 +4260,8 @@ package body Sem_Ch6 is
then
null;
- -- A loop with no exit statement or iteration scheme if either
- -- an inifite loop, or it has some other exit (raise/return).
+ -- A loop with no exit statement or iteration scheme is either
+ -- an infinite loop, or it has some other exit (raise/return).
-- In either case, no warning is required.
else
@@ -6529,7 +6529,7 @@ package body Sem_Ch6 is
else
Error_Msg_Sloc := Sloc (E);
- -- Generate message,with useful additionalwarning if in generic
+ -- Generate message, with useful additional warning if in generic
if Is_Generic_Unit (E) then
Error_Msg_N ("previous generic unit cannot be overloaded", S);
@@ -6580,9 +6580,9 @@ package body Sem_Ch6 is
-- There are some cases when both can be implicit, for example
-- when both a literal and a function that overrides it are
- -- inherited in a derivation, or when an inhertited operation
+ -- inherited in a derivation, or when an inherited operation
-- of a tagged full type overrides the inherited operation of
- -- a private extension. Ada 83 had a special rule for the the
+ -- a private extension. Ada 83 had a special rule for the
-- literal case. In Ada95, the later implicit operation hides
-- the former, and the literal is always the former. In the
-- odd case where both are derived operations declared at the
@@ -7443,7 +7443,7 @@ package body Sem_Ch6 is
AS_Needed : Boolean;
begin
- -- If this is an emtpy initialization procedure, no need to create
+ -- If this is an empty initialization procedure, no need to create
-- actual subtypes (small optimization).
if Ekind (Subp) = E_Procedure
diff --git a/gcc/ada/sem_ch6.ads b/gcc/ada/sem_ch6.ads
index a195945..a535bd1 100644
--- a/gcc/ada/sem_ch6.ads
+++ b/gcc/ada/sem_ch6.ads
@@ -78,7 +78,7 @@ package Sem_Ch6 is
(New_Id : Entity_Id;
Old_Id : Entity_Id;
Err_Loc : Node_Id := Empty);
- -- Check that two callable entitites (subprograms, entries, literals)
+ -- Check that two callable entities (subprograms, entries, literals)
-- are fully conformant, post error message if not (RM 6.3.1(17)) with
-- the flag being placed on the Err_Loc node if it is specified, and
-- on the appropriate component of the New_Id construct if not. Note:
@@ -92,7 +92,7 @@ package Sem_Ch6 is
Old_Id : Entity_Id;
Err_Loc : Node_Id := Empty;
Get_Inst : Boolean := False);
- -- Check that two callable entitites (subprograms, entries, literals)
+ -- Check that two callable entities (subprograms, entries, literals)
-- are mode conformant, post error message if not (RM 6.3.1(15)) with
-- the flag being placed on the Err_Loc node if it is specified, and
-- on the appropriate component of the New_Id construct if not. The
@@ -114,7 +114,7 @@ package Sem_Ch6 is
(New_Id : Entity_Id;
Old_Id : Entity_Id;
Err_Loc : Node_Id := Empty);
- -- Check that two callable entitites (subprograms, entries, literals)
+ -- Check that two callable entities (subprograms, entries, literals)
-- are subtype conformant, post error message if not (RM 6.3.1(16))
-- the flag being placed on the Err_Loc node if it is specified, and
-- on the appropriate component of the New_Id construct if not.
@@ -123,7 +123,7 @@ package Sem_Ch6 is
(New_Id : Entity_Id;
Old_Id : Entity_Id;
Err_Loc : Node_Id := Empty);
- -- Check that two callable entitites (subprograms, entries, literals)
+ -- Check that two callable entities (subprograms, entries, literals)
-- are type conformant, post error message if not (RM 6.3.1(14)) with
-- the flag being placed on the Err_Loc node if it is specified, and
-- on the appropriate component of the New_Id construct if not.
diff --git a/gcc/ada/sem_ch8.adb b/gcc/ada/sem_ch8.adb
index ad03cdb..da77f58 100644
--- a/gcc/ada/sem_ch8.adb
+++ b/gcc/ada/sem_ch8.adb
@@ -462,7 +462,7 @@ package body Sem_Ch8 is
-- gram in an instance, for which special visibility checks apply.
function Has_Implicit_Operator (N : Node_Id) return Boolean;
- -- N is an expanded name whose selector is an operator name (eg P."+").
+ -- N is an expanded name whose selector is an operator name (e.g. P."+").
-- declarative part contains an implicit declaration of an operator if it
-- has a declaration of a type to which one of the predefined operators
-- apply. The existence of this routine is an implementation artifact. A
@@ -1431,7 +1431,7 @@ package body Sem_Ch8 is
-- in Sub must also have one. Otherwise the subtype of the Sub's
-- formal parameter must exclude null.
--
- -- If Ren is a renaming of a formal function and its retrun
+ -- If Ren is a renaming of a formal function and its return
-- profile has a null exclusion, then Sub's return profile must
-- have one. Otherwise the subtype of Sub's return profile must
-- exclude null.
@@ -1957,7 +1957,7 @@ package body Sem_Ch8 is
if Is_Actual then
null;
- -- Guard agaisnt previous errors, and omit renamings of predefined
+ -- Guard against previous errors, and omit renamings of predefined
-- operators.
elsif Ekind (Old_S) /= E_Function
@@ -3838,7 +3838,7 @@ package body Sem_Ch8 is
All_Overloadable := All_Overloadable and Is_Overloadable (E2);
-- Ada 2005 (AI-262): Protect against a form of Beujolais effect
- -- that can occurr in private_with clauses. Example:
+ -- that can occur in private_with clauses. Example:
-- with A;
-- private with B; package A is
@@ -4027,7 +4027,7 @@ package body Sem_Ch8 is
-- When distribution features are available (Get_PCS_Name /=
-- Name_No_DSA), a remote access-to-subprogram type is converted
-- into a record type holding whatever information is needed to
- -- perform a remote call on an RCI suprogram. In that case we
+ -- perform a remote call on an RCI subprogram. In that case we
-- rewrite any occurrence of the RAS type into the equivalent record
-- type here. 'Access attribute references and RAS dereferences are
-- then implemented using specific TSSs. However when distribution is
@@ -4143,7 +4143,7 @@ package body Sem_Ch8 is
-- the entity is unambiguous, because the tree is not
-- sufficiently typed at this point for Generate_Reference to
-- determine whether this reference modifies the denoted object
- -- (because implicit derefences cannot be identified prior to
+ -- (because implicit dereferences cannot be identified prior to
-- full type resolution).
--
-- The Is_Actual_Parameter routine takes care of one of these
@@ -6110,7 +6110,7 @@ package body Sem_Ch8 is
end if;
-- If the new use clause appears in the private part of a parent unit
- -- it may appear to be redudant w.r.t. a use clause in a child unit,
+ -- it may appear to be redundant w.r.t. a use clause in a child unit,
-- but the previous use clause was needed in the visible part of the
-- child, and no warning should be emitted.
@@ -6989,7 +6989,7 @@ package body Sem_Ch8 is
-- type T ... use P.T;
-- The compilation unit is the body of X. GNAT first compiles the
- -- spec of X, then procedes to the body. At that point P is marked
+ -- spec of X, then proceeds to the body. At that point P is marked
-- as use visible. The analysis then reinstalls the spec along with
-- its context. The use clause P.T is now recognized as redundant,
-- but in the wrong context. Do not emit a warning in such cases.
diff --git a/gcc/ada/sem_ch8.ads b/gcc/ada/sem_ch8.ads
index 1d887aa..45fb07b 100644
--- a/gcc/ada/sem_ch8.ads
+++ b/gcc/ada/sem_ch8.ads
@@ -6,7 +6,7 @@
-- --
-- S p e c --
-- --
--- Copyright (C) 1992-2007, Free Software Foundation, Inc. --
+-- Copyright (C) 1992-2008, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
@@ -146,7 +146,7 @@ package Sem_Ch8 is
-- return, the contents of the scope stack must be made accessible again.
-- The flag Handle_Use indicates whether local use clauses must be
-- removed/installed. In the case of inlining of instance bodies, the
- -- visiblity handling is done fully in Inline_Instance_Body, and use
+ -- visibility handling is done fully in Inline_Instance_Body, and use
-- clauses are handled there.
procedure Set_Use (L : List_Id);
diff --git a/gcc/ada/sem_ch9.adb b/gcc/ada/sem_ch9.adb
index 86de33e..d9e7ff9 100644
--- a/gcc/ada/sem_ch9.adb
+++ b/gcc/ada/sem_ch9.adb
@@ -917,7 +917,7 @@ package body Sem_Ch9 is
if Nkind (Call) = N_Attribute_Reference then
-- Possibly a stream attribute, but definitely illegal. Other
- -- illegalitles, such as procedure calls, are diagnosed after
+ -- illegalities, such as procedure calls, are diagnosed after
-- resolution.
Error_Msg_N ("entry call alternative requires an entry call", Call);
@@ -983,7 +983,7 @@ package body Sem_Ch9 is
-- order to make it available to the barrier, we create an additional
-- scope, as for a loop, whose only declaration is the index name. This
-- loop is not attached to the tree and does not appear as an entity local
- -- to the protected type, so its existence need only be knwown to routines
+ -- to the protected type, so its existence need only be known to routines
-- that process entry families.
procedure Analyze_Entry_Index_Specification (N : Node_Id) is
@@ -2175,7 +2175,7 @@ package body Sem_Ch9 is
("triggering statement must be delay or entry call", Trigger);
-- Ada 2005 (AI-345): If a procedure_call_statement is used for a
- -- procedure_or_entry_call, the procedure_name or pro- cedure_prefix
+ -- procedure_or_entry_call, the procedure_name or procedure_prefix
-- of the procedure_call_statement shall denote an entry renamed by a
-- procedure, or (a view of) a primitive subprogram of a limited
-- interface whose first parameter is a controlling parameter.
diff --git a/gcc/ada/sem_elab.adb b/gcc/ada/sem_elab.adb
index d61ebb0..3406599 100644
--- a/gcc/ada/sem_elab.adb
+++ b/gcc/ada/sem_elab.adb
@@ -491,7 +491,7 @@ package body Sem_Elab is
-- calls and calls involving object notation) where W_Scope might not
-- be in the context of the current unit, and there is an intermediate
-- package that is, in which case the Elaborate_All has to be placed
- -- on this intedermediate package. These special cases are handled in
+ -- on this intermediate package. These special cases are handled in
-- Set_Elaboration_Constraint.
Body_Acts_As_Spec : Boolean;
@@ -1795,7 +1795,7 @@ package body Sem_Elab is
-- outer level call.
-- It is an outer level instantiation from elaboration code, or the
- -- instantiated entity is in the same elaboratoin scope.
+ -- instantiated entity is in the same elaboration scope.
-- And in these cases, we will check both the inter-unit case and
-- the intra-unit (within a single unit) case.
@@ -1877,7 +1877,7 @@ package body Sem_Elab is
return;
-- Nothing to do if analyzing in special spec-expression mode, since the
- -- call is not actualy being made at this time.
+ -- call is not actually being made at this time.
elsif In_Spec_Expression then
return;
@@ -2408,7 +2408,7 @@ package body Sem_Elab is
and then
not Restriction_Active (No_Entry_Calls_In_Elaboration_Code)
then
- -- Runtime elaboration check required. generate check of the
+ -- Runtime elaboration check required. Generate check of the
-- elaboration Boolean for the unit containing the entity.
Insert_Elab_Check (N,
diff --git a/gcc/ada/sem_elab.ads b/gcc/ada/sem_elab.ads
index f6529b8..7b85b6f 100644
--- a/gcc/ada/sem_elab.ads
+++ b/gcc/ada/sem_elab.ads
@@ -6,7 +6,7 @@
-- --
-- S p e c --
-- --
--- Copyright (C) 1997-2007, Free Software Foundation, Inc. --
+-- Copyright (C) 1997-2008, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
@@ -85,7 +85,7 @@ package Sem_Elab is
-- Note on pragma Elaborate. The checking here assumes that a pragma
-- Elaborate on a with'ed unit guarantees that subprograms within the
-- unit can be called without causing an ABE. This is not in fact the
- -- case since pragma Elaborate does not guarantee the transititive
+ -- case since pragma Elaborate does not guarantee the transitive
-- coverage guaranteed by Elaborate_All. However, we leave this issue
-- up to the binder, which has generates warnings if there are possible
-- problems in the use of pragma Elaborate.
diff --git a/gcc/ada/sem_elim.ads b/gcc/ada/sem_elim.ads
index dfcad41..ee9f8a1 100644
--- a/gcc/ada/sem_elim.ads
+++ b/gcc/ada/sem_elim.ads
@@ -6,7 +6,7 @@
-- --
-- S p e c --
-- --
--- Copyright (C) 1997-2007, Free Software Foundation, Inc. --
+-- Copyright (C) 1997-2008, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
@@ -30,7 +30,7 @@ with Types; use Types;
package Sem_Elim is
procedure Initialize;
- -- Initialize for new main souce program
+ -- Initialize for new main source program
procedure Process_Eliminate_Pragma
(Pragma_Node : Node_Id;
@@ -53,7 +53,7 @@ package Sem_Elim is
-- flag on the given entity.
procedure Eliminate_Error_Msg (N : Node_Id; E : Entity_Id);
- -- Called by the back end on encouterning a call to an eliminated
+ -- Called by the back end on encountering a call to an eliminated
-- subprogram. N is the node for the call, and E is the entity of
-- the subprogram being eliminated.
diff --git a/gcc/ada/sem_eval.adb b/gcc/ada/sem_eval.adb
index 7b38241..9801df6 100644
--- a/gcc/ada/sem_eval.adb
+++ b/gcc/ada/sem_eval.adb
@@ -57,7 +57,7 @@ package body Sem_Eval is
-----------------------------------------
-- The compile time evaluation of expressions is distributed over several
- -- Eval_xxx procedures. These procedures are called immediatedly after
+ -- Eval_xxx procedures. These procedures are called immediately after
-- a subexpression is resolved and is therefore accomplished in a bottom
-- up fashion. The flags are synthesized using the following approach.
@@ -3227,7 +3227,7 @@ package body Sem_Eval is
return Ureal_0;
end if;
- -- If we fall through, we have a node that cannot be interepreted
+ -- If we fall through, we have a node that cannot be interpreted
-- as a compile time constant. That is definitely an error.
raise Program_Error;
@@ -3307,7 +3307,7 @@ package body Sem_Eval is
Typ := Full_View (Typ);
end if;
- -- For a result of type integer, subsitute an N_Integer_Literal node
+ -- For a result of type integer, substitute an N_Integer_Literal node
-- for the result of the compile time evaluation of the expression.
if Is_Integer_Type (Typ) then
@@ -3497,7 +3497,7 @@ package body Sem_Eval is
end if;
-- If any exception occurs, it means that we have some bug in the compiler
- -- possibly triggered by a previous error, or by some unforseen peculiar
+ -- possibly triggered by a previous error, or by some unforeseen peculiar
-- occurrence. However, this is only an optimization attempt, so there is
-- really no point in crashing the compiler. Instead we just decide, too
-- bad, we can't figure out the answer in this case after all.
@@ -4097,7 +4097,7 @@ package body Sem_Eval is
-- To understand the requirement for this test, see RM 4.9.1(1).
-- As is made clear in RM 3.5.4(11), type Integer, for example
-- is a constrained subtype with constraint bounds matching the
- -- bounds of its corresponding uncontrained base type. In this
+ -- bounds of its corresponding unconstrained base type. In this
-- situation, Integer and Integer'Base do not statically match,
-- even though they have the same bounds.
diff --git a/gcc/ada/sem_eval.ads b/gcc/ada/sem_eval.ads
index bb6348b..f0dcd52 100644
--- a/gcc/ada/sem_eval.ads
+++ b/gcc/ada/sem_eval.ads
@@ -6,7 +6,7 @@
-- --
-- S p e c --
-- --
--- Copyright (C) 1992-2007, Free Software Foundation, Inc. --
+-- Copyright (C) 1992-2008, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
@@ -56,7 +56,7 @@ package Sem_Eval is
-- Raises_Constraint_Error
- -- This flag indicatest that it is known at compile time that the
+ -- This flag indicates that it is known at compile time that the
-- evaluation of an expression raises constraint error. If the
-- expression is static, and this flag is off, then it is also known at
-- compile time that the expression does not raise constraint error
@@ -159,7 +159,7 @@ package Sem_Eval is
-- An OK static expression is one that is static in the RM definition sense
-- and which does not raise constraint error. For most legality checking
-- purposes you should use Is_Static_Expression. For those legality checks
- -- where the expression N should not raise constaint error use this
+ -- where the expression N should not raise constraint error use this
-- routine. This routine is *not* to be used in contexts where the test is
-- for compile time evaluation purposes. Use Compile_Time_Known_Value
-- instead (see section on "Compile-Time Known Values" above).
@@ -328,7 +328,7 @@ package Sem_Eval is
Int_Real : Boolean := False) return Boolean;
-- Returns True if it can be guaranteed at compile time that expression is
-- known to be in range of the subtype Typ. If the values of N or of either
- -- bouds of Type are unknown at compile time, False will always be
+ -- bounds of Type are unknown at compile time, False will always be
-- returned. A result of False does not mean that the expression is out of
-- range, merely that it cannot be determined at compile time that it is in
-- range. If Typ is a floating point type or Int_Real is set, any integer
@@ -339,8 +339,8 @@ package Sem_Eval is
-- is True then any fixed-point value is treated as though it was discrete
-- value (i.e. the underlying integer value is used). In this case we use
-- the corresponding integer value, both for the bounds of Typ, and for the
- -- value of the expression N. If Typ is a discret type and Fixed_Int as
- -- well as Int_Real are false, intere values are used throughout.
+ -- value of the expression N. If Typ is a discrete type and Fixed_Int as
+ -- well as Int_Real are false, integer values are used throughout.
function Is_Out_Of_Range
(N : Node_Id;
diff --git a/gcc/ada/sem_intr.adb b/gcc/ada/sem_intr.adb
index 42d78ba..9d73197 100644
--- a/gcc/ada/sem_intr.adb
+++ b/gcc/ada/sem_intr.adb
@@ -6,7 +6,7 @@
-- --
-- B o d y --
-- --
--- Copyright (C) 1992-2007, Free Software Foundation, Inc. --
+-- Copyright (C) 1992-2008, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
@@ -132,7 +132,7 @@ package body Sem_Intr is
end if;
-- Check for the case of freeing a non-null object which will raise
- -- Constaint_Error. Issue warning here, do the expansion in Exp_Intr.
+ -- Constraint_Error. Issue warning here, do the expansion in Exp_Intr.
elsif Cnam = Name_Free
and then Can_Never_Be_Null (Etype (Arg1))
@@ -158,7 +158,7 @@ package body Sem_Intr is
T2 : Entity_Id;
begin
- -- Aritnmetic operators
+ -- Arithmetic operators
if Nam = Name_Op_Add
or else
@@ -304,7 +304,7 @@ package body Sem_Intr is
Errint ("unrecognized intrinsic subprogram", E, N);
-- We always allow intrinsic specifications in language defined units
- -- and in expanded code. We assume that the GNAT implemetors know what
+ -- and in expanded code. We assume that the GNAT implementors know what
-- they are doing, and do not write or generate junk use of intrinsic!
elsif not Comes_From_Source (E)
diff --git a/gcc/ada/sem_mech.adb b/gcc/ada/sem_mech.adb
index 62f9af8..177a39c 100644
--- a/gcc/ada/sem_mech.adb
+++ b/gcc/ada/sem_mech.adb
@@ -6,7 +6,7 @@
-- --
-- B o d y --
-- --
--- Copyright (C) 1996-2007, Free Software Foundation, Inc. --
+-- Copyright (C) 1996-2008, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
@@ -183,7 +183,7 @@ package body Sem_Mech is
is
begin
-- Right now we only do some checks for functions returning arguments
- -- by desctiptor. Probably mode checks need to be added here ???
+ -- by descriptor. Probably mode checks need to be added here ???
if Mech in Descriptor_Codes and then not Is_Formal (Ent) then
if Is_Record_Type (Etype (Ent)) then
@@ -207,7 +207,7 @@ package body Sem_Mech is
begin
-- Skip this processing if inside a generic template. Not only is
- -- it uneccessary (since neither extra formals nor mechanisms are
+ -- it unnecessary (since neither extra formals nor mechanisms are
-- relevant for the template itself), but at least at the moment,
-- procedures get frozen early inside a template so attempting to
-- look at the formal types does not work too well if they are
@@ -241,7 +241,7 @@ package body Sem_Mech is
---------
-- Note: all RM defined conventions are treated the same
- -- from the point of view of parameter passing mechanims
+ -- from the point of view of parameter passing mechanism
when Convention_Ada |
Convention_Intrinsic |
diff --git a/gcc/ada/sem_mech.ads b/gcc/ada/sem_mech.ads
index 27edf22..1673a67 100644
--- a/gcc/ada/sem_mech.ads
+++ b/gcc/ada/sem_mech.ads
@@ -6,7 +6,7 @@
-- --
-- S p e c --
-- --
--- Copyright (C) 1996-2007, Free Software Foundation, Inc. --
+-- Copyright (C) 1996-2008, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
@@ -144,7 +144,7 @@ package Sem_Mech is
-- this call is to set mechanism values for formals and for the
-- function return if they have not already been explicitly set by
-- a use of an extended Import or Export pragma. The idea is to set
- -- mechanism values whereever the semantics is dictated by either
+ -- mechanism values wherever the semantics is dictated by either
-- requirements or implementation advice in the RM, and to leave
-- the mechanism set to Default if there is no requirement, so that
-- the back-end is free to choose the most efficient method.
diff --git a/gcc/ada/sem_prag.adb b/gcc/ada/sem_prag.adb
index 4dba98d..b98e004 100644
--- a/gcc/ada/sem_prag.adb
+++ b/gcc/ada/sem_prag.adb
@@ -564,7 +564,7 @@ package body Sem_Prag is
-- Decls where Decls is the list of declarative items.
function Is_Configuration_Pragma return Boolean;
- -- Deterermines if the placement of the current pragma is appropriate
+ -- Determines if the placement of the current pragma is appropriate
-- for a configuration pragma.
function Is_In_Context_Clause return Boolean;
@@ -587,7 +587,7 @@ package body Sem_Prag is
-- Common processing for Compile_Time_Error and Compile_Time_Warning
procedure Process_Convention (C : out Convention_Id; E : out Entity_Id);
- -- Common procesing for Convention, Interface, Import and Export.
+ -- Common processing for Convention, Interface, Import and Export.
-- Checks first two arguments of pragma, and sets the appropriate
-- convention value in the specified entity or entities. On return
-- C is the convention, E is the referenced entity.
@@ -606,7 +606,7 @@ package body Sem_Prag is
(Arg_Internal : Node_Id;
Arg_External : Node_Id;
Arg_Size : Node_Id);
- -- Common processing for the pragmass Import/Export_Object.
+ -- Common processing for the pragmas Import/Export_Object.
-- The three arguments correspond to the three named parameters
-- of the pragmas. An argument is empty if the corresponding
-- parameter is not present in the pragma.
@@ -629,7 +629,7 @@ package body Sem_Prag is
Arg_First_Optional_Parameter : Node_Id := Empty);
-- Common processing for all extended Import and Export pragmas
-- applying to subprograms. The caller omits any arguments that do
- -- bnot apply to the pragma in question (for example, Arg_Result_Type
+ -- not apply to the pragma in question (for example, Arg_Result_Type
-- can be non-Empty only in the Import_Function and Export_Function
-- cases). The argument names correspond to the allowed pragma
-- association identifiers.
@@ -1486,7 +1486,7 @@ package body Sem_Prag is
--------------------------------------
-- A configuration pragma must appear in the context clause of a
- -- compilation unit, and only other pragmas may preceed it. Note that
+ -- compilation unit, and only other pragmas may precede it. Note that
-- the test also allows use in a configuration pragma file.
procedure Check_Valid_Configuration_Pragma is
@@ -2129,7 +2129,7 @@ package body Sem_Prag is
-- An interesting improvement here. If an object of type X
-- is declared atomic, and the type X is not atomic, that's
- -- a pity, since it may not have appropraite alignment etc.
+ -- a pity, since it may not have appropriate alignment etc.
-- We can rescue this in the special case where the object
-- and type are in the same unit by just setting the type
-- as atomic, so that the back end will process it as atomic.
@@ -2831,7 +2831,7 @@ package body Sem_Prag is
end if;
-- We have a match if the corresponding argument is of an
- -- anonymous access type, and its designicated type matches
+ -- anonymous access type, and its designated type matches
-- the type of the prefix of the access attribute
return Ekind (Ftyp) = E_Anonymous_Access_Type
@@ -3040,7 +3040,7 @@ package body Sem_Prag is
then
null;
- -- In all other cases, set entit as exported
+ -- In all other cases, set entity as exported
else
Set_Exported (Ent, Arg_Internal);
@@ -3535,7 +3535,7 @@ package body Sem_Prag is
function Inlining_Not_Possible (Subp : Entity_Id) return Boolean;
-- Returns True if it can be determined at this stage that inlining
- -- is not possible, for examle if the body is available and contains
+ -- is not possible, for example if the body is available and contains
-- exception handlers, we prevent inlining, since otherwise we can
-- get undefined symbols at link time. This function also emits a
-- warning if front-end inlining is enabled and the pragma appears
@@ -4808,7 +4808,7 @@ package body Sem_Prag is
end;
-- An enumeration type defines the pragmas that are supported by the
- -- implementation. Get_Pragma_Id (in package Prag) transorms a name
+ -- implementation. Get_Pragma_Id (in package Prag) transforms a name
-- into the corresponding enumeration value for the following case.
case Prag_Id is
@@ -6249,7 +6249,7 @@ package body Sem_Prag is
-- compilation unit. If the pragma appears in some unit
-- in the context, there might still be a need for an
-- Elaborate_All_Desirable from the current compilation
- -- to the the named unit, so we keep the check enabled.
+ -- to the named unit, so we keep the check enabled.
if In_Extended_Main_Source_Unit (N) then
Set_Suppress_Elaboration_Warnings
@@ -6271,7 +6271,7 @@ package body Sem_Prag is
end loop Outer;
-- Give a warning if operating in static mode with -gnatwl
- -- (elaboration warnings eanbled) switch set.
+ -- (elaboration warnings enabled) switch set.
if Elab_Warnings and not Dynamic_Elaboration_Checks then
Error_Msg_N
@@ -9001,7 +9001,7 @@ package body Sem_Prag is
-- pragma No_Run_Time
- -- Note: this pragma is retained for backwards compatibiltiy.
+ -- Note: this pragma is retained for backwards compatibility.
-- See body of Rtsfind for full details on its handling.
when Pragma_No_Run_Time =>
@@ -10567,7 +10567,7 @@ package body Sem_Prag is
end if;
end Check_OK_Stream_Convert_Function;
- -- Start of procecessing for Stream_Convert
+ -- Start of processing for Stream_Convert
begin
GNAT_Pragma;
@@ -11962,7 +11962,7 @@ package body Sem_Prag is
return True;
end Add_Config_Static_String;
- -- Start of prorcessing for Is_Config_Static_String
+ -- Start of processing for Is_Config_Static_String
begin
@@ -11977,8 +11977,8 @@ package body Sem_Prag is
-- This function makes use of the following static table which indicates
-- whether a given pragma is significant. A value of -1 in this table
-- indicates that the reference is significant. A value of zero indicates
- -- than appearence as any argument is insignificant, a positive value
- -- indicates that appearence in that parameter position is significant.
+ -- than appearance as any argument is insignificant, a positive value
+ -- indicates that appearance in that parameter position is significant.
-- A value of 99 flags a special case requiring a special check (this is
-- used for cases not covered by this standard encoding, e.g. pragma Check
diff --git a/gcc/ada/sem_prag.ads b/gcc/ada/sem_prag.ads
index 7218ff6..1bb5115 100644
--- a/gcc/ada/sem_prag.ads
+++ b/gcc/ada/sem_prag.ads
@@ -75,7 +75,7 @@ package Sem_Prag is
-- occurrence is a reference for the purposes of giving warnings about
-- unreferenced variables. This function returns True if the reference is
-- not a reference from this point of view (e.g. the occurrence in a pragma
- -- Pack) and False if it is a real reference (e.g. the occcurrence in a
+ -- Pack) and False if it is a real reference (e.g. the occurrence in a
-- pragma Export);
function Is_Pragma_String_Literal (Par : Node_Id) return Boolean;
diff --git a/gcc/ada/sem_res.adb b/gcc/ada/sem_res.adb
index b9ef016..cfa1a8c 100644
--- a/gcc/ada/sem_res.adb
+++ b/gcc/ada/sem_res.adb
@@ -828,7 +828,7 @@ package body Sem_Res is
function Uses_SS (T : Entity_Id) return Boolean;
-- Check whether the creation of an object of the type will involve
-- use of the secondary stack. If T is a record type, this is true
- -- if the expression for some component uses the secondary stack, eg.
+ -- if the expression for some component uses the secondary stack, e.g.
-- through a call to a function that returns an unconstrained value.
-- False if T is controlled, because cleanups occur elsewhere.
@@ -985,7 +985,7 @@ package body Sem_Res is
or else Is_Overloaded (N)))
-- Rewrite as call if it is an explicit deference of an expression of
- -- a subprogram access type, and the suprogram type is not that of a
+ -- a subprogram access type, and the subprogram type is not that of a
-- procedure or entry.
or else
@@ -2387,7 +2387,7 @@ package body Sem_Res is
end if;
end if;
- -- A user-defined operator is tranformed into a function call at
+ -- A user-defined operator is transformed into a function call at
-- this point, so that further processing knows that operators are
-- really operators (i.e. are predefined operators). User-defined
-- operators that are intrinsic are just renamings of the predefined
@@ -2869,7 +2869,7 @@ package body Sem_Res is
Set_Parent (Actval, N);
-- Resolve aggregates with their base type, to avoid scope
- -- anomalies: the subtype was first built in the suprogram
+ -- anomalies: the subtype was first built in the subprogram
-- declaration, and the current call may be nested.
if Nkind (Actval) = N_Aggregate
@@ -3585,7 +3585,7 @@ package body Sem_Res is
-- 1) Analyze Top_Record
-- 2) Analyze Level_1_Coextension
-- 3) Analyze Level_2_Coextension
- -- 4) Resolve Level_2_Coextnesion. The allocator is marked as a
+ -- 4) Resolve Level_2_Coextension. The allocator is marked as a
-- coextension.
-- 5) Expand Level_2_Coextension. A temporary variable Temp_1 is
-- generated to capture the allocated object. Temp_1 is attached
@@ -3675,7 +3675,7 @@ package body Sem_Res is
function Process_Allocator (Nod : Node_Id) return Traverse_Result;
-- Recognize an allocator or a rewritten allocator node and add it
- -- allong with its nested coextensions to the list of Root.
+ -- along with its nested coextensions to the list of Root.
---------------
-- Copy_List --
@@ -3833,7 +3833,7 @@ package body Sem_Res is
-- A special accessibility check is needed for allocators that
-- constrain access discriminants. The level of the type of the
-- expression used to constrain an access discriminant cannot be
- -- deeper than the type of the allocator (in constrast to access
+ -- deeper than the type of the allocator (in contrast to access
-- parameters, where the level of the actual can be arbitrary).
-- We can't use Valid_Conversion to perform this check because
@@ -3912,7 +3912,7 @@ package body Sem_Res is
-- A special accessibility check is needed for allocators that
-- constrain access discriminants. The level of the type of the
-- expression used to constrain an access discriminant cannot be
- -- deeper than the type of the allocator (in constrast to access
+ -- deeper than the type of the allocator (in contrast to access
-- parameters, where the level of the actual can be arbitrary).
-- We can't use Valid_Conversion to perform this check because
-- in general the type of the allocator is unrelated to the type
@@ -6249,7 +6249,7 @@ package body Sem_Res is
end if;
-- If name was overloaded, set component type correctly now
- -- If a misplaced call to an entry family (which has no index typs)
+ -- If a misplaced call to an entry family (which has no index types)
-- return. Error will be diagnosed from calling context.
if Is_Array_Type (Array_Type) then
@@ -6832,7 +6832,7 @@ package body Sem_Res is
B_Typ : constant Entity_Id := Base_Type (Typ);
begin
- -- Catch attempts to do fixed-point exponentation with universal
+ -- Catch attempts to do fixed-point exponentiation with universal
-- operands, which is a case where the illegality is not caught during
-- normal operator analysis.
@@ -6939,7 +6939,7 @@ package body Sem_Res is
B_Typ := Base_Type (Typ);
end if;
- -- Straigtforward case of incorrect arguments
+ -- Straightforward case of incorrect arguments
if not Valid_Boolean_Arg (Typ) then
Error_Msg_N ("invalid operand type for operator&", N);
@@ -7735,8 +7735,8 @@ package body Sem_Res is
elsif R_Typ = Any_Character then
return;
- -- If the type is bit-packed, then we always tranform the string literal
- -- into a full fledged aggregate.
+ -- If the type is bit-packed, then we always transform the string
+ -- literal into a full fledged aggregate.
elsif Is_Bit_Packed_Array (Typ) then
null;
@@ -8252,7 +8252,7 @@ package body Sem_Res is
Rorig := Original_Node (Right_Opnd (Norig));
-- We are looking for cases where the right operand is not
- -- parenthesized, and is a bianry operator, multiply, divide, or
+ -- parenthesized, and is a binary operator, multiply, divide, or
-- mod. These are the cases where the grouping can affect results.
if Paren_Count (Rorig) = 0
@@ -9120,7 +9120,7 @@ package body Sem_Res is
-- Also no need to check when in an instance or inlined body, because
-- the legality has been established when the template was analyzed.
-- Furthermore, numeric conversions may occur where only a private
- -- view of the operand type is visible at the instanciation point.
+ -- view of the operand type is visible at the instantiation point.
-- This results in a spurious error if we check that the operand type
-- is a numeric type.
@@ -9223,7 +9223,7 @@ package body Sem_Res is
-- The case of a reference to an access discriminant from
-- within a limited type declaration (which will appear as
-- a discriminal) is always illegal because the level of the
- -- discriminant is considered to be deeper than any (namable)
+ -- discriminant is considered to be deeper than any (nameable)
-- access type.
if Is_Entity_Name (Operand)
@@ -9335,7 +9335,7 @@ package body Sem_Res is
-- The case of a reference to an access discriminant from
-- within a limited type declaration (which will appear as
-- a discriminal) is always illegal because the level of the
- -- discriminant is considered to be deeper than any (namable)
+ -- discriminant is considered to be deeper than any (nameable)
-- access type.
if Is_Entity_Name (Operand)
diff --git a/gcc/ada/sem_res.ads b/gcc/ada/sem_res.ads
index d870472..70b534b 100644
--- a/gcc/ada/sem_res.ads
+++ b/gcc/ada/sem_res.ads
@@ -103,7 +103,7 @@ package Sem_Res is
-- Several forms of names can denote calls to entities without para-
-- meters. The context determines whether the name denotes the entity
-- or a call to it. When it is a call, the node must be rebuilt
- -- accordingly and renalyzed to obtain possible interpretations.
+ -- accordingly and reanalyzed to obtain possible interpretations.
--
-- The name may be that of an overloadable construct, or it can be an
-- explicit dereference of a prefix that denotes an access to subprogram.
diff --git a/gcc/ada/sem_type.adb b/gcc/ada/sem_type.adb
index 1c40158..b118c37 100644
--- a/gcc/ada/sem_type.adb
+++ b/gcc/ada/sem_type.adb
@@ -932,7 +932,7 @@ package body Sem_Type is
-- The context can be a remote access type, and the expression the
-- corresponding source type declared in a categorized package, or
- -- viceversa.
+ -- vice versa.
elsif Is_Record_Type (T1)
and then (Is_Remote_Call_Interface (T1)
diff --git a/gcc/ada/sem_util.adb b/gcc/ada/sem_util.adb
index 54925d7..9ab77bb 100644
--- a/gcc/ada/sem_util.adb
+++ b/gcc/ada/sem_util.adb
@@ -2731,7 +2731,7 @@ package body Sem_Util is
and then Length_Of_Name (Chars (C)) /= 1
- -- Don't warn for non-source eneities
+ -- Don't warn for non-source entities
and then Comes_From_Source (C)
and then Comes_From_Source (Def_Id)
@@ -2999,7 +2999,7 @@ package body Sem_Util is
(Prim_Params : List_Id;
Iface_Params : List_Id) return Boolean;
-- Determine whether a subprogram's parameter profile Prim_Params
- -- matches that of a potentially overriden interface subprogram
+ -- matches that of a potentially overridden interface subprogram
-- Iface_Params. Also determine if the type of first parameter of
-- Iface_Params is an implemented interface.
@@ -3088,7 +3088,7 @@ package body Sem_Util is
Prim_Param := First (Prim_Params);
- -- The first parameter of the potentially overriden subprogram
+ -- The first parameter of the potentially overridden subprogram
-- must be an interface implemented by Prim.
if not Is_Interface (Iface_Typ)
@@ -3173,7 +3173,7 @@ package body Sem_Util is
return Empty;
end if;
- -- Traverse the homonym chain, looking at a potentially overriden
+ -- Traverse the homonym chain, looking at a potentially overridden
-- subprogram that belongs to an implemented interface.
Hom := First_Hom;
@@ -4472,7 +4472,7 @@ package body Sem_Util is
Set_Result (Unknown);
-- Now check size of Expr object. Any size that is not an
- -- even multiple of Maxiumum_Alignment is also worrisome
+ -- even multiple of Maximum_Alignment is also worrisome
-- since it may cause the alignment of the object to be less
-- than the alignment of the type.
@@ -4942,7 +4942,7 @@ package body Sem_Util is
then
-- Get default expression if any. If there is no declaration
-- node, it means we have an internal entity. The parent and
- -- tag fields are examples of such entitires. For these cases,
+ -- tag fields are examples of such entities. For these cases,
-- we just test the type of the entity.
if Present (Declaration_Node (Ent)) then
@@ -5341,9 +5341,9 @@ package body Sem_Util is
return False;
end In_Instance_Visible_Part;
- ----------------------
- -- In_Packiage_Body --
- ----------------------
+ ---------------------
+ -- In_Package_Body --
+ ---------------------
function In_Package_Body return Boolean is
S : Entity_Id;
@@ -6616,7 +6616,7 @@ package body Sem_Util is
Indx : Node_Id;
begin
- -- For private type, test corrresponding full type
+ -- For private type, test corresponding full type
if Is_Private_Type (T) then
return Is_Potentially_Persistent_Type (Full_View (T));
@@ -7482,7 +7482,7 @@ package body Sem_Util is
when N_Type_Conversion =>
return Known_To_Be_Assigned (P);
- -- All other references are definitely not knwon to be modifications
+ -- All other references are definitely not known to be modifications
when others =>
return False;
@@ -7611,7 +7611,7 @@ package body Sem_Util is
when N_Type_Conversion =>
return May_Be_Lvalue (P);
- -- Test for appearence in object renaming declaration
+ -- Test for appearance in object renaming declaration
when N_Object_Renaming_Declaration =>
return True;
@@ -8819,7 +8819,7 @@ package body Sem_Util is
function Clear_Analyzed (N : Node_Id) return Traverse_Result;
-- Function used to reset Analyzed flags in tree. Note that we do
-- not reset Analyzed flags in entities, since there is no need to
- -- renalalyze entities, and indeed, it is wrong to do so, since it
+ -- reanalyze entities, and indeed, it is wrong to do so, since it
-- can result in generating auxiliary stuff more than once.
--------------------
@@ -9707,7 +9707,7 @@ package body Sem_Util is
Btyp := Root_Type (Btyp);
- -- The accessibility level of anonymous acccess types associated with
+ -- The accessibility level of anonymous access types associated with
-- discriminants is that of the current instance of the type, and
-- that's deeper than the type itself (AARM 3.10.2 (12.3.21)).
diff --git a/gcc/ada/sem_util.ads b/gcc/ada/sem_util.ads
index c47af51..519f574 100644
--- a/gcc/ada/sem_util.ads
+++ b/gcc/ada/sem_util.ads
@@ -438,7 +438,7 @@ package Sem_Util is
Pos : Uint;
Loc : Source_Ptr) return Entity_Id;
-- This function obtains the E_Enumeration_Literal entity for the
- -- specified value from the enumneration type or subtype T. The
+ -- specified value from the enumeration type or subtype T. The
-- second argument is the Pos value, which is assumed to be in range.
-- The third argument supplies a source location for constructed
-- nodes returned by this function.
@@ -547,7 +547,7 @@ package Sem_Util is
-- initialize procedure, which makes the type not preelaborable.
function Has_Preelaborable_Initialization (E : Entity_Id) return Boolean;
- -- Return True iff type E has preelaborable initialiation as defined in
+ -- Return True iff type E has preelaborable initialisation as defined in
-- Ada 2005 (see AI-161 for details of the definition of this attribute).
function Has_Private_Component (Type_Id : Entity_Id) return Boolean;
@@ -566,8 +566,8 @@ package Sem_Util is
-- Returns True if Typ is a composite type (array or record) which is
-- either itself a tagged type, or has a component (recursively) which is
-- a tagged type. Returns False for non-composite type, or if no tagged
- -- component is present. to check if '=' has to be expanded into a bunch
- -- component comparisons.
+ -- component is present. This function is used to check if '=' has to be
+ -- expanded into a bunch component comparisons.
function In_Instance return Boolean;
-- Returns True if the current scope is within a generic instance
@@ -690,7 +690,7 @@ package Sem_Util is
-- i.e. a library unit or an entity declared in a library package.
function Is_Local_Variable_Reference (Expr : Node_Id) return Boolean;
- -- Determines whether Expr is a refeference to a variable or IN OUT
+ -- Determines whether Expr is a reference to a variable or IN OUT
-- mode parameter of the current enclosing subprogram.
-- Why are OUT parameters not considered here ???
@@ -747,7 +747,7 @@ package Sem_Util is
function Is_Selector_Name (N : Node_Id) return Boolean;
-- Given an N_Identifier node N, determines if it is a Selector_Name.
-- As described in Sinfo, Selector_Names are special because they
- -- represent use of the N_Identifier node for a true identifer, when
+ -- represent use of the N_Identifier node for a true identifier, when
-- normally such nodes represent a direct name.
function Is_Statement (N : Node_Id) return Boolean;
@@ -795,14 +795,15 @@ package Sem_Util is
-- entities in the current scope and in any parent scopes if the current
-- scope is a block or a package (and that recursion continues to the top
-- scope that is not a block or a package). This is used when the
- -- sequential flow-of-control assumption is violated (occurence of a label,
- -- head of a loop, or start of an exception handler). The effect of the
- -- call is to clear the Constant_Value field (but we do not need to clear
- -- the Is_True_Constant flag, since that only gets reset if there really is
- -- an assignment somewhere in the entity scope). This procedure also calls
- -- Kill_All_Checks, since this is a special case of needing to forget saved
- -- values. This procedure also clears Is_Known_Non_Null flags in variables,
- -- constants or parameters since these are also not known to be valid.
+ -- sequential flow-of-control assumption is violated (occurrence of a
+ -- label, head of a loop, or start of an exception handler). The effect of
+ -- the call is to clear the Constant_Value field (but we do not need to
+ -- clear the Is_True_Constant flag, since that only gets reset if there
+ -- really is an assignment somewhere in the entity scope). This procedure
+ -- also calls Kill_All_Checks, since this is a special case of needing to
+ -- forget saved values. This procedure also clears Is_Known_Non_Null flags
+ -- in variables, constants or parameters since these are also not known to
+ -- be valid.
--
-- The Last_Assignment_Only flag is set True to clear only Last_Assignment
-- fields and leave other fields unchanged. This is used when we encounter
@@ -911,7 +912,7 @@ package Sem_Util is
-- next entry of the Parameter_Associations list. The argument is an
-- actual previously returned by a call to First_Actual or Next_Actual.
-- Note that the result produced is always an expression, not a parameter
- -- assciation node, even if named notation was used.
+ -- association node, even if named notation was used.
procedure Normalize_Actuals
(N : Node_Id;
@@ -919,7 +920,7 @@ package Sem_Util is
Report : Boolean;
Success : out Boolean);
-- Reorders lists of actuals according to names of formals, value returned
- -- in Success indicates sucess of reordering. For more details, see body.
+ -- in Success indicates success of reordering. For more details, see body.
-- Errors are reported only if Report is set to True.
procedure Note_Possible_Modification (N : Node_Id; Sure : Boolean);
@@ -1019,7 +1020,7 @@ package Sem_Util is
function Same_Object (Node1, Node2 : Node_Id) return Boolean;
-- Determine if Node1 and Node2 are known to designate the same object.
- -- This is a semantic test and both nodesmust be fully analyzed. A result
+ -- This is a semantic test and both nodes must be fully analyzed. A result
-- of True is decisively correct. A result of False does not necessarily
-- mean that different objects are designated, just that this could not
-- be reliably determined at compile time.
diff --git a/gcc/ada/sem_warn.adb b/gcc/ada/sem_warn.adb
index b9b81ab..5fe9743 100644
--- a/gcc/ada/sem_warn.adb
+++ b/gcc/ada/sem_warn.adb
@@ -62,10 +62,10 @@ package body Sem_Warn is
-- The following table collects potential warnings for IN OUT parameters
-- that are referenced but not modified. These warnings are processed when
- -- the front end calls the procedure Output_Non_Modifed_In_Out_Warnings.
+ -- the front end calls the procedure Output_Non_Modified_In_Out_Warnings.
-- The reason that we defer output of these messages is that we want to
-- detect the case where the relevant procedure is used as a generic actual
- -- in an instantation, since we suppress the warnings in this case. The
+ -- in an instantiation, since we suppress the warnings in this case. The
-- flag Used_As_Generic_Actual will be set in this case, but only at the
-- point of usage. Similarly, we suppress the message if the address of the
-- procedure is taken, where the flag Address_Taken may be set later.
@@ -98,7 +98,7 @@ package body Sem_Warn is
-- Instead the following is preferred
- -- if somme-other-predicate-on-E
+ -- if some-other-predicate-on-E
-- and then Has_Warnings_Off (E)
-- This way if some-other-predicate is false, we avoid a false indication
@@ -611,7 +611,7 @@ package body Sem_Warn is
(E : Entity_Id;
Accept_Statement : Node_Id) return Entity_Id;
-- For an entry formal entity from an entry declaration, find the
- -- corrsesponding body formal from the given accept statement.
+ -- corresponding body formal from the given accept statement.
function Missing_Subunits return Boolean;
-- We suppress warnings when there are missing subunits, because this
@@ -1067,7 +1067,7 @@ package body Sem_Warn is
-- actual, or its address/access is taken. In these two
-- cases, we suppress the warning because the context may
-- force use of IN OUT, even if in this particular case
- -- the formal is not modifed.
+ -- the formal is not modified.
else
In_Out_Warnings.Append (E1);
@@ -1174,7 +1174,7 @@ package body Sem_Warn is
-- If the selected component comes from expansion, all
-- we know is that the entity is not fully initialized
-- at the point of the reference. Locate a random
- -- unintialized component to get a better message.
+ -- uninitialized component to get a better message.
elsif Nkind (Parent (UR)) = N_Selected_Component then
Error_Msg_Node_2 := Selector_Name (Parent (UR));
@@ -1429,7 +1429,7 @@ package body Sem_Warn is
end if;
-- Recurse into nested package or block. Do not recurse into a
- -- formal package, because the correponding body is not analyzed.
+ -- formal package, because the corresponding body is not analyzed.
<<Continue>>
if ((Ekind (E1) = E_Package or else Ekind (E1) = E_Generic_Package)
@@ -1539,7 +1539,7 @@ package body Sem_Warn is
case Nkind (N) is
- -- For identifier or exanded name, examine the entity involved
+ -- For identifier or expanded name, examine the entity involved
when N_Identifier | N_Expanded_Name =>
declare
@@ -1636,7 +1636,7 @@ package body Sem_Warn is
function Process
(N : Node_Id) return Traverse_Result;
- -- Process function for instantation of Traverse
+ -- Process function for instantiation of Traverse
-- below. Checks if N contains reference to other
-- than a dereference.
@@ -1882,7 +1882,7 @@ package body Sem_Warn is
-- The only reference to a context unit may be in a renaming
-- declaration. If this renaming declares a visible entity, do
-- not warn that the context clause could be moved to the body,
- -- because the renaming may be intented to re-export the unit.
+ -- because the renaming may be intended to re-export the unit.
-------------------------
-- Check_Inner_Package --
@@ -2514,7 +2514,7 @@ package body Sem_Warn is
end if;
end No_Warn_On_In_Out;
- -- Start of processing for Output_Non_Modifed_In_Out_Warnings
+ -- Start of processing for Output_Non_Modified_In_Out_Warnings
begin
-- Loop through entities for which a warning may be needed
@@ -3292,7 +3292,7 @@ package body Sem_Warn is
-- to this lower bound. If not, False is returned, and Low_Bound is
-- undefined on return.
--
- -- For now, we limite this to standard string types, so any other
+ -- For now, we limit this to standard string types, so any other
-- unconstrained types return False. We may change our minds on this
-- later on, but strings seem the most important case.
@@ -3369,7 +3369,7 @@ package body Sem_Warn is
begin
-- Nothing to do if subscript does not come from source (we don't
-- want to give garbage warnings on compiler expanded code, e.g. the
- -- loops generated for slice assignments. Sucb junk warnings would
+ -- loops generated for slice assignments. Such junk warnings would
-- be placed on source constructs with no subscript in sight!)
if not Comes_From_Source (Original_Node (X)) then
@@ -3411,7 +3411,7 @@ package body Sem_Warn is
-- Tref (Sref) is used to scan the subscript
Pctr : Natural;
- -- Paretheses counter when scanning subscript
+ -- Parentheses counter when scanning subscript
begin
-- Tref (Sref) points to start of subscript
@@ -3602,7 +3602,7 @@ package body Sem_Warn is
Next_Formal (Form2);
end loop;
- -- Here all conditionas are met, record possible unset reference
+ -- Here all conditions are met, record possible unset reference
Set_Unset_Reference (Form, Return_Node);
end if;
@@ -3631,7 +3631,7 @@ package body Sem_Warn is
-- Case of variable that is assigned but not read. We suppress
-- the message if the variable is volatile, has an address
- -- clause, is aliasied, or is a renaming, or is imported.
+ -- clause, is aliased, or is a renaming, or is imported.
if Referenced_As_LHS_Check_Spec (E)
and then No (Address_Clause (E))
@@ -3879,7 +3879,7 @@ package body Sem_Warn is
-- If we are not at the top level, we regard an inner
-- exception handler as a decisive indicator that we should
-- not generate the warning, since the variable in question
- -- may be acceessed after an exception in the outer block.
+ -- may be accessed after an exception in the outer block.
if Nkind (Parent (P)) /= N_Subprogram_Body
and then Nkind (Parent (P)) /= N_Package_Body
diff --git a/gcc/ada/sem_warn.ads b/gcc/ada/sem_warn.ads
index d78bba9..e3daef4 100644
--- a/gcc/ada/sem_warn.ads
+++ b/gcc/ada/sem_warn.ads
@@ -169,7 +169,7 @@ package Sem_Warn is
-- should be given for a possible infinite loop, and if so issues it.
procedure Warn_On_Known_Condition (C : Node_Id);
- -- C is a node for a boolean expression resluting from a relational
+ -- C is a node for a boolean expression resulting from a relational
-- or membership operation. If the expression has a compile time known
-- value, then a warning is output if all the following conditions hold:
--