This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
toplevel Makefile.in patch take two.
- From: Nathanael Nerode <neroden at doctormoo dot dyndns dot org>
- To: gcc-patches at gcc dot gnu dot org, aoliva at redhat dot com
- Date: Sun, 22 Sep 2002 16:44:48 -0400
- Subject: toplevel Makefile.in patch take two.
All my recent uncommitted toplevel changes as one patch.
Makefile.tpl now contains a rule to regenerate Makefile.in, per Alex's
comments. gcc_update is now changed to match. Otherwise as previously.
I can't test gcc_update, so someone else will have to look at it.
Documentation patch will follow when I figure out where it's supposed to go.
(Note that both Makefile.in and Makefile.tpl already have an annotation at the
top.)
If this is approved for mainline gcc I'll check it into src too; if only
for the 3.4 improvements branch, I won't.
2002-09-22 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.def: New file.
* Makefile.tpl: New file.
* Makefile.in: Generate from Makefile.tpl with 'autogen Makefile.def'.
* contrib/gcc_update: Note that Makefile.in is a generated file.
* configure.in: Minor rearrangement. Simplify tests.
Index: Makefile.def
===================================================================
RCS file: Makefile.def
diff -N Makefile.def
--- /dev/null 1 Jan 1970 00:00:00 -0000
+++ Makefile.def 22 Sep 2002 20:36:04 -0000
@@ -0,0 +1,65 @@
+#! /usr/bin/autogen
+AutoGen definitions Makefile.tpl;
+
+host_modules= { module= ash; };
+host_modules= { module= autoconf; };
+host_modules= { module= automake; };
+host_modules= { module= bash; };
+host_modules= { module= bfd; };
+// Put install-opcodes before install-binutils: should be Makefile dependency.
+host_modules= { module= opcodes; };
+host_modules= { module= binutils; };
+host_modules= { module= bison; no_check_cross= true; };
+host_modules= { module= byacc; no_check_cross= true; };
+host_modules= { module= bzip2; };
+host_modules= { module= db; };
+host_modules= { module= dejagnu; };
+host_modules= { module= diff; };
+host_modules= { module= dosutils; no_check= true; };
+host_modules= { module= etc; };
+host_modules= { module= fastjar; no_check_cross= true; };
+host_modules= { module= fileutils; };
+host_modules= { module= findutils; };
+host_modules= { module= find; };
+host_modules= { module= flex; no_check_cross= true; };
+host_modules= { module= gas; };
+host_modules= { module= gawk; };
+host_modules= { module= gettext; };
+host_modules= { module= gnuserv; };
+host_modules= { module= gprof; };
+host_modules= { module= grep; };
+host_modules= { module= gzip; };
+host_modules= { module= hello; };
+host_modules= { module= indent; };
+host_modules= { module= intl; };
+// Put install-tcl before install-itcl: should be Makefile dependency.
+host_modules= { module= tcl; };
+host_modules= { module= itcl; };
+host_modules= { module= ld; };
+host_modules= { module= libgui; };
+host_modules= { module= libiberty; };
+host_modules= { module= libtool; };
+host_modules= { module= m4; };
+host_modules= { module= make; };
+host_modules= { module= mmalloc; no_check=true; };
+host_modules= { module= patch; };
+host_modules= { module= perl; };
+host_modules= { module= prms; };
+host_modules= { module= rcs; };
+host_modules= { module= readline; };
+host_modules= { module= release; no_install= true; no_check= true; };
+host_modules= { module= recode; };
+host_modules= { module= sed; };
+host_modules= { module= send-pr; };
+host_modules= { module= shellutils; };
+host_modules= { module= sid; };
+host_modules= { module= sim; };
+host_modules= { module= snavigator; };
+host_modules= { module= tar; };
+host_modules= { module= texinfo; no_install= true; };
+host_modules= { module= textutils; };
+host_modules= { module= time; };
+host_modules= { module= uudecode; };
+host_modules= { module= wdiff; };
+host_modules= { module= zip; no_check_cross=true; };
+host_modules= { module= zlib; no_install=true; no_check=true; };
Index: Makefile.in
===================================================================
RCS file: /cvs/gcc/gcc/Makefile.in,v
retrieving revision 1.111
diff -u -3 -r1.111 Makefile.in
--- Makefile.in 19 Aug 2002 20:38:15 -0000 1.111
+++ Makefile.in 22 Sep 2002 20:36:06 -0000
@@ -1,3 +1,5 @@
+
+# Makefile.in is generated from Makefile.tpl by 'autogen Makefile.def'.
#
# Makefile for directory with subdirs to build.
# Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
@@ -529,6 +531,7 @@
all-automake \
all-bash \
all-bfd \
+ all-opcodes \
all-binutils \
all-bison \
all-byacc \
@@ -553,6 +556,7 @@
all-hello \
all-indent \
all-intl \
+ all-tcl \
all-itcl \
all-ld \
all-libgui \
@@ -561,7 +565,6 @@
all-m4 \
all-make \
all-mmalloc \
- all-opcodes \
all-patch \
all-perl \
all-prms \
@@ -576,7 +579,6 @@
all-sim \
all-snavigator \
all-tar \
- all-tcl \
all-texinfo \
all-textutils \
all-time \
@@ -605,6 +607,7 @@
check-automake \
check-bash \
check-bfd \
+ check-opcodes \
check-binutils \
check-bzip2 \
check-db \
@@ -624,6 +627,7 @@
check-hello \
check-indent \
check-intl \
+ check-tcl \
check-itcl \
check-ld \
check-libgui \
@@ -631,8 +635,6 @@
check-libtool \
check-m4 \
check-make \
- check-mmcheckoc \
- check-opcodes \
check-patch \
check-perl \
check-prms \
@@ -642,11 +644,10 @@
check-sed \
check-send-pr \
check-shellutils \
- check-snavigator \
check-sid \
check-sim \
+ check-snavigator \
check-tar \
- check-tcl \
check-texinfo \
check-textutils \
check-time \
@@ -669,11 +670,11 @@
install-automake \
install-bash \
install-bfd \
- install-bzip2 \
install-opcodes \
install-binutils \
install-bison \
install-byacc \
+ install-bzip2 \
install-db \
install-dejagnu \
install-diff \
@@ -831,6 +832,7 @@
clean-automake \
clean-bash \
clean-bfd \
+ clean-opcodes \
clean-binutils \
clean-bison \
clean-byacc \
@@ -855,6 +857,7 @@
clean-hello \
clean-indent \
clean-intl \
+ clean-tcl \
clean-itcl \
clean-ld \
clean-libgui \
@@ -863,7 +866,6 @@
clean-m4 \
clean-make \
clean-mmalloc \
- clean-opcodes \
clean-patch \
clean-perl \
clean-prms \
@@ -878,14 +880,13 @@
clean-sim \
clean-snavigator \
clean-tar \
- clean-tcl \
clean-texinfo \
clean-textutils \
clean-time \
clean-uudecode \
clean-wdiff \
clean-zip \
- clean-zlib
+ clean-zlib
# All of the target modules that can be cleaned
CLEAN_TARGET_MODULES = \
Index: Makefile.tpl
===================================================================
RCS file: Makefile.tpl
diff -N Makefile.tpl
--- /dev/null 1 Jan 1970 00:00:00 -0000
+++ Makefile.tpl 22 Sep 2002 20:36:08 -0000
@@ -0,0 +1,1868 @@
+[+ AutoGen5 template
+in
++]
+
+# Makefile.in is generated from Makefile.tpl by 'autogen Makefile.def'.
+#
+# Makefile for directory with subdirs to build.
+# Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+# 1999, 2000, 2001, 2002 Free Software Foundation
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+
+# Tell GNU make 3.79 not to run the top level in parallel. This
+# prevents contention for $builddir/$target/config.cache, as well
+# as minimizing scatter in file system caches.
+NOTPARALLEL = .NOTPARALLEL
+$(NOTPARALLEL):
+
+srcdir = .
+
+prefix = /usr/local
+exec_prefix = $(prefix)
+
+bindir=${exec_prefix}/bin
+sbindir=${exec_prefix}/sbin
+libexecdir=${exec_prefix}/libexec
+datadir=${prefix}/share
+sysconfdir=${prefix}/etc
+sharedstatedir=${prefix}/com
+localstatedir=${prefix}/var
+libdir=${exec_prefix}/lib
+includedir=${prefix}/include
+oldincludedir=/usr/include
+infodir=${prefix}/info
+mandir=${prefix}/man
+gxx_include_dir=${includedir}/g++
+
+tooldir = $(exec_prefix)/$(target_alias)
+build_tooldir = $(exec_prefix)/$(target_alias)
+
+program_transform_name =
+
+man1dir = $(mandir)/man1
+man2dir = $(mandir)/man2
+man3dir = $(mandir)/man3
+man4dir = $(mandir)/man4
+man5dir = $(mandir)/man5
+man6dir = $(mandir)/man6
+man7dir = $(mandir)/man7
+man8dir = $(mandir)/man8
+man9dir = $(mandir)/man9
+infodir = $(prefix)/info
+includedir = $(prefix)/include
+# Directory in which the compiler finds executables, libraries, etc.
+libsubdir = $(libdir)/gcc-lib/$(target_alias)/$(gcc_version)
+GDB_NLM_DEPS =
+
+SHELL = /bin/sh
+
+# pwd command to use. Allow user to override default by setting PWDCMD in
+# the environment to account for automounters. The make variable must not
+# be called PWDCMD, otherwise the value set here is passed to make
+# subprocesses and overrides the setting from the user's environment.
+PWD = $${PWDCMD-pwd}
+
+# INSTALL_PROGRAM_ARGS is changed by configure.in to use -x for a
+# cygwin host.
+INSTALL_PROGRAM_ARGS =
+
+INSTALL = $(SHELL) $$s/install-sh -c
+INSTALL_PROGRAM = $(INSTALL) $(INSTALL_PROGRAM_ARGS)
+INSTALL_SCRIPT = $(INSTALL)
+INSTALL_DATA = $(INSTALL) -m 644
+
+INSTALL_DOSREL = install-dosrel-fake
+
+AS = as
+AR = ar
+AR_FLAGS = rc
+CC = cc
+
+# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
+# here so that they can be overridden by Makefile fragments.
+HOST_CC = $(CC_FOR_BUILD)
+BUILD_PREFIX =
+BUILD_PREFIX_1 = loser-
+
+# These flag values are normally overridden by the configure script.
+CFLAGS = -g
+CXXFLAGS = -g -O2
+
+LDFLAGS =
+LIBCFLAGS = $(CFLAGS)
+CFLAGS_FOR_BUILD = $(CFLAGS)
+# During gcc bootstrap, if we use some random cc for stage1 then
+# CFLAGS will be just -g. We want to ensure that TARGET libraries
+# (which we know are built with gcc) are built with optimizations so
+# prepend -O2 when setting CFLAGS_FOR_TARGET.
+CFLAGS_FOR_TARGET = -O2 $(CFLAGS)
+LDFLAGS_FOR_TARGET =
+LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
+PICFLAG =
+PICFLAG_FOR_TARGET =
+
+CXX = c++
+
+# Use -O2 to stress test the compiler.
+LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
+CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
+LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
+
+DLLTOOL = dlltool
+WINDRES = windres
+
+NM = nm
+
+LD = ld
+
+BZIPPROG = bzip2
+MD5PROG = md5sum
+
+# These values are substituted by configure.
+DEFAULT_YACC = yacc
+DEFAULT_LEX = lex
+DEFAULT_M4 = m4
+
+BISON = `if [ -f $$r/bison/bison ] ; then \
+ echo $$r/bison/bison -L $$s/bison/ ; \
+ else \
+ echo bison ; \
+ fi`
+
+YACC = `if [ -f $$r/bison/bison ] ; then \
+ echo $$r/bison/bison -y -L $$s/bison/ ; \
+ elif [ -f $$r/byacc/byacc ] ; then \
+ echo $$r/byacc/byacc ; \
+ else \
+ echo ${DEFAULT_YACC} ; \
+ fi`
+
+LEX = `if [ -f $$r/flex/flex ] ; \
+ then echo $$r/flex/flex ; \
+ else echo ${DEFAULT_LEX} ; fi`
+
+M4 = `if [ -f $$r/m4/m4 ] ; \
+ then echo $$r/m4/m4 ; \
+ else echo ${DEFAULT_M4} ; fi`
+
+# For an installed makeinfo, we require it to be from texinfo 4 or
+# higher, else we use the "missing" dummy.
+MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
+ then echo $$r/texinfo/makeinfo/makeinfo ; \
+ else if (makeinfo --version \
+ | egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \
+ then echo makeinfo; else echo $$s/missing makeinfo; fi; fi`
+
+# This just becomes part of the MAKEINFO definition passed down to
+# sub-makes. It lets flags be given on the command line while still
+# using the makeinfo from the object tree.
+MAKEINFOFLAGS =
+
+EXPECT = `if [ -f $$r/expect/expect ] ; \
+ then echo $$r/expect/expect ; \
+ else echo expect ; fi`
+
+RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \
+ then echo $$s/dejagnu/runtest ; \
+ else echo runtest ; fi`
+
+
+# compilers to use to create programs which must be run in the build
+# environment.
+CC_FOR_BUILD = $(CC)
+CXX_FOR_BUILD = $(CXX)
+
+SUBDIRS = "this is set via configure, don't edit this"
+OTHERS =
+
+# This is set by the configure script to the list of directories which
+# should be built using the target tools.
+TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib winsup opcodes libf2c libobjc
+
+# Target libraries are put under this directory:
+# Changed by configure to $(target_alias) if cross.
+TARGET_SUBDIR = .
+
+BUILD_CONFIGDIRS = libiberty
+BUILD_SUBDIR = .
+
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the target.
+TARGET_CONFIGARGS =
+
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the build system.
+BUILD_CONFIGARGS =
+
+# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
+# was used.
+SET_LIB_PATH =
+
+# This is the name of the environment variable used for the path to
+# the libraries. This may be changed by configure.in.
+RPATH_ENVVAR = LD_LIBRARY_PATH
+
+# This is the list of directories that may be needed in RPATH_ENVVAR
+# so that programs built for the host machine work.
+HOST_LIB_PATH = $$r/bfd:$$r/opcodes
+
+# This is the list of directories that may be needed in RPATH_ENVVAR
+# so that prorgams built for the target machine work.
+TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs:
+
+# configure.in sets SET_LIB_PATH to this if --enable-shared was used.
+# Some platforms don't like blank entries, so we remove duplicate,
+# leading and trailing colons.
+REALLY_SET_LIB_PATH = \
+ $(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH):$(TARGET_LIB_PATH):$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR);
+
+ALL = all.normal
+INSTALL_TARGET = installdirs \
+ install-gcc \
+ $(INSTALL_MODULES) \
+ $(INSTALL_TARGET_MODULES) \
+ $(INSTALL_X11_MODULES) \
+ $(INSTALL_DOSREL)
+
+INSTALL_TARGET_CROSS = installdirs \
+ install-gcc-cross \
+ $(INSTALL_MODULES) \
+ $(INSTALL_TARGET_MODULES) \
+ $(INSTALL_X11_MODULES) \
+ $(INSTALL_DOSREL)
+
+# Should be substed by configure.in
+FLAGS_FOR_TARGET =
+CC_FOR_TARGET =
+CXX_FOR_TARGET =
+CXX_FOR_TARGET_FOR_RECURSIVE_MAKE =
+GCJ_FOR_TARGET =
+
+# If GCC_FOR_TARGET is not overriden on the command line, then this
+# variable is passed down to the gcc Makefile, where it is used to
+# build libgcc2.a. We define it here so that it can itself be
+# overridden on the command line.
+GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
+
+AS_FOR_TARGET = ` \
+ if [ -f $$r/gas/as-new ] ; then \
+ echo $$r/gas/as-new ; \
+ elif [ -f $$r/gcc/xgcc ]; then \
+ $(CC_FOR_TARGET) -print-prog-name=as ; \
+ else \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+ echo $(AS); \
+ else \
+ t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+LD_FOR_TARGET = ` \
+ if [ -f $$r/ld/ld-new ] ; then \
+ echo $$r/ld/ld-new ; \
+ elif [ -f $$r/gcc/xgcc ]; then \
+ $(CC_FOR_TARGET) -print-prog-name=ld ; \
+ else \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+ echo $(LD); \
+ else \
+ t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+DLLTOOL_FOR_TARGET = ` \
+ if [ -f $$r/binutils/dlltool ] ; then \
+ echo $$r/binutils/dlltool ; \
+ else \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+ echo $(DLLTOOL); \
+ else \
+ t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+WINDRES_FOR_TARGET = ` \
+ if [ -f $$r/binutils/windres ] ; then \
+ echo $$r/binutils/windres ; \
+ else \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+ echo $(WINDRES); \
+ else \
+ t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+AR_FOR_TARGET = ` \
+ if [ -f $$r/binutils/ar ] ; then \
+ echo $$r/binutils/ar ; \
+ else \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+ echo $(AR); \
+ else \
+ t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+RANLIB_FOR_TARGET = ` \
+ if [ -f $$r/binutils/ranlib ] ; then \
+ echo $$r/binutils/ranlib ; \
+ else \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+ if [ x'$(RANLIB)' != x ]; then \
+ echo $(RANLIB); \
+ else \
+ echo ranlib; \
+ fi; \
+ else \
+ t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+NM_FOR_TARGET = ` \
+ if [ -f $$r/binutils/nm-new ] ; then \
+ echo $$r/binutils/nm-new ; \
+ elif [ -f $$r/gcc/xgcc ]; then \
+ $(CC_FOR_TARGET) -print-prog-name=nm ; \
+ else \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+ echo $(NM); \
+ else \
+ t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+# The first rule in the file had better be this one. Don't put any above it.
+# This lives here to allow makefile fragments to contain dependencies.
+all: all.normal
+.PHONY: all
+
+# These can be overridden by config/mt-*.
+# The _TARGET_ is because they're specified in mt-foo.
+# The _HOST_ is because they're programs that run on the host.
+EXTRA_TARGET_HOST_ALL_MODULES =
+EXTRA_TARGET_HOST_INSTALL_MODULES =
+EXTRA_TARGET_HOST_CHECK_MODULES =
+
+#### host and target specific makefile fragments come in here.
+###
+
+# Flags to pass down to all sub-makes.
+# Please keep these in alphabetical order.
+BASE_FLAGS_TO_PASS = \
+ "AR_FLAGS=$(AR_FLAGS)" \
+ "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
+ "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
+ "BISON=$(BISON)" \
+ "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
+ "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
+ "CFLAGS=$(CFLAGS)" \
+ "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
+ "GCJ_FOR_TARGET=$(GCJ_FOR_TARGET)" \
+ "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
+ "CXXFLAGS=$(CXXFLAGS)" \
+ "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
+ "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
+ "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
+ "INSTALL=$(INSTALL)" \
+ "INSTALL_DATA=$(INSTALL_DATA)" \
+ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
+ "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
+ "LDFLAGS=$(LDFLAGS)" \
+ "LEX=$(LEX)" \
+ "LD_FOR_TARGET=$(LD_FOR_TARGET)" \
+ "LIBCFLAGS=$(LIBCFLAGS)" \
+ "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
+ "LIBCXXFLAGS=$(LIBCXXFLAGS)" \
+ "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
+ "M4=$(M4)" \
+ "MAKE=$(MAKE)" \
+ "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
+ "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
+ "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
+ "RPATH_ENVVAR=$(RPATH_ENVVAR)" \
+ "SHELL=$(SHELL)" \
+ "EXPECT=$(EXPECT)" \
+ "RUNTEST=$(RUNTEST)" \
+ "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
+ "TARGET_SUBDIR=$(TARGET_SUBDIR)" \
+ "WINDRES_FOR_TARGET=$(WINDRES_FOR_TARGET)" \
+ "YACC=$(YACC)" \
+ "bindir=$(bindir)" \
+ "datadir=$(datadir)" \
+ "exec_prefix=$(exec_prefix)" \
+ "includedir=$(includedir)" \
+ "infodir=$(infodir)" \
+ "libdir=$(libdir)" \
+ "libexecdir=$(libexecdir)" \
+ "lispdir=$(lispdir)" \
+ "libstdcxx_incdir=$(libstdcxx_incdir)" \
+ "libsubdir=$(libsubdir)" \
+ "localstatedir=$(localstatedir)" \
+ "mandir=$(mandir)" \
+ "oldincludedir=$(oldincludedir)" \
+ "prefix=$(prefix)" \
+ "sbindir=$(sbindir)" \
+ "sharedstatedir=$(sharedstatedir)" \
+ "sysconfdir=$(sysconfdir)" \
+ "tooldir=$(tooldir)" \
+ "build_tooldir=$(build_tooldir)" \
+ "gxx_include_dir=$(gxx_include_dir)" \
+ "gcc_version=$(gcc_version)" \
+ "gcc_version_trigger=$(gcc_version_trigger)" \
+ "target_alias=$(target_alias)"
+
+# For any flags above that may contain shell code that varies from one
+# target library to another. When doing recursive invocations of the
+# top-level Makefile, we don't want the outer make to evaluate them,
+# so we pass these variables down unchanged. They must not contain
+# single nor double quotes.
+RECURSE_FLAGS = \
+ CXX_FOR_TARGET='$(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)'
+
+# Flags to pass down to most sub-makes, in which we're building with
+# the host environment.
+# If any variables are added here, they must be added to do-*, below.
+EXTRA_HOST_FLAGS = \
+ 'AR=$(AR)' \
+ 'AS=$(AS)' \
+ 'CC=$(CC)' \
+ 'CXX=$(CXX)' \
+ 'DLLTOOL=$(DLLTOOL)' \
+ 'LD=$(LD)' \
+ 'NM=$(NM)' \
+ "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
+ 'WINDRES=$(WINDRES)'
+
+FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
+
+# Flags that are concerned with the location of the X11 include files
+# and library files
+#
+# NOTE: until the top-level is getting the values via autoconf, it only
+# causes problems to have this top-level Makefile overriding the autoconf-set
+# values in child directories. Only variables that don't conflict with
+# autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
+#
+X11_FLAGS_TO_PASS = \
+ 'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
+ 'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
+
+# Flags to pass down to makes which are built with the target environment.
+# The double $ decreases the length of the command line; the variables
+# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
+# If any variables are added here, they must be added to do-*, below.
+EXTRA_TARGET_FLAGS = \
+ 'AR=$$(AR_FOR_TARGET)' \
+ 'AS=$$(AS_FOR_TARGET)' \
+ 'CC=$$(CC_FOR_TARGET)' \
+ 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
+ 'CXX=$$(CXX_FOR_TARGET)' \
+ 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
+ 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
+ 'LD=$$(LD_FOR_TARGET)' \
+ 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
+ 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
+ 'NM=$$(NM_FOR_TARGET)' \
+ 'RANLIB=$$(RANLIB_FOR_TARGET)' \
+ 'WINDRES=$$(WINDRES_FOR_TARGET)'
+
+TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
+
+# Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
+# unfortunately needs the native compiler and the target ar and
+# ranlib.
+# If any variables are added here, they must be added to do-*, below.
+# The HOST_* variables are a special case, which are used for the gcc
+# cross-building scheme.
+EXTRA_GCC_FLAGS = \
+ 'AR=$(AR)' \
+ 'AS=$(AS)' \
+ 'CC=$(CC)' \
+ 'CXX=$(CXX)' \
+ 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
+ 'HOST_CC=$(CC_FOR_BUILD)' \
+ 'BUILD_PREFIX=$(BUILD_PREFIX)' \
+ 'BUILD_PREFIX_1=$(BUILD_PREFIX_1)' \
+ 'NM=$(NM)' \
+ "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
+ 'WINDRES=$$(WINDRES_FOR_TARGET)' \
+ "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
+ "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
+ "`echo 'LANGUAGES=$(LANGUAGES)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'ENQUIRE=$(ENQUIRE)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'STAGE1_CFLAGS=$(STAGE1_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)' | sed -e s/.*=$$/XFOO=/`"
+
+GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
+
+# This is a list of the targets for all of the modules which are compiled
+# using the build machine's native compiler. Configure edits the second
+# macro for build!=host builds.
+ALL_BUILD_MODULES_LIST = \
+ all-build-libiberty
+ALL_BUILD_MODULES =
+
+# This is a list of the configure targets for all of the modules which
+# are compiled using the native tools.
+CONFIGURE_BUILD_MODULES = \
+ configure-build-libiberty
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(FLAGS_TO_PASS).
+ALL_MODULES = [+ FOR host_modules +]\
+ all-[+module+] [+ ENDFOR host_modules +]\
+ $(EXTRA_TARGET_HOST_ALL_MODULES)
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(FLAGS_TO_PASS).
+#
+# The list is in two parts. The first lists those tools which
+# are tested as part of the host's native tool-chain, and not
+# tested in a cross configuration.
+NATIVE_CHECK_MODULES = \
+ check-bison \
+ check-byacc \
+ check-fastjar \
+ check-flex \
+ check-zip
+
+CROSS_CHECK_MODULES = [+ FOR host_modules +][+ IF no_check +][+ ELIF no_check_cross +][+ ELSE x +]\
+ check-[+module+] [+ ENDIF no_check +][+ ENDFOR host_modules +]\
+ $(EXTRA_TARGET_HOST_CHECK_MODULES)
+
+CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+
+# This is a list of the install targets for all of the modules which are
+# compiled using $(FLAGS_TO_PASS).
+# We put install-opcodes before install-binutils because the installed
+# binutils might be on PATH, and they might need the shared opcodes
+# library.
+# We put install-tcl before install-itcl because itcl wants to run a
+# program on installation which uses the Tcl libraries.
+INSTALL_MODULES = [+ FOR host_modules+][+ IF no_install +][+ ELSE no_install +]\
+ install-[+module+] [+ ENDIF no_install +][+ ENDFOR host_modules +]\
+ $(EXTRA_TARGET_HOST_INSTALL_MODULES)
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(X11_FLAGS_TO_PASS).
+ALL_X11_MODULES = \
+ all-gdb \
+ all-expect \
+ all-guile \
+ all-tclX \
+ all-tk \
+ all-tix
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(X11_FLAGS_TO_PASS).
+CHECK_X11_MODULES = \
+ check-gdb \
+ check-guile \
+ check-expect \
+ check-tclX \
+ check-tk \
+ check-tix
+
+# This is a list of the install targets for all the modules which are
+# compiled using $(X11_FLAGS_TO_PASS).
+INSTALL_X11_MODULES = \
+ install-gdb \
+ install-guile \
+ install-expect \
+ install-tclX \
+ install-tk \
+ install-tix
+
+# This is a list of the targets for all of the modules which are compiled
+# using $(TARGET_FLAGS_TO_PASS).
+ALL_TARGET_MODULES = \
+ all-target-libstdc++-v3 \
+ all-target-newlib \
+ all-target-libf2c \
+ all-target-libobjc \
+ all-target-libtermcap \
+ all-target-winsup \
+ all-target-libgloss \
+ all-target-libiberty \
+ all-target-gperf \
+ all-target-examples \
+ all-target-libffi \
+ all-target-libjava \
+ all-target-zlib \
+ all-target-boehm-gc \
+ all-target-qthreads
+
+# This is a list of the configure targets for all of the modules which
+# are compiled using the target tools.
+CONFIGURE_TARGET_MODULES = \
+ configure-target-libstdc++-v3 \
+ configure-target-newlib \
+ configure-target-libf2c \
+ configure-target-libobjc \
+ configure-target-libtermcap \
+ configure-target-winsup \
+ configure-target-libgloss \
+ configure-target-libiberty \
+ configure-target-gperf \
+ configure-target-examples \
+ configure-target-libffi \
+ configure-target-libjava \
+ configure-target-zlib \
+ configure-target-boehm-gc \
+ configure-target-qthreads
+
+# This is a list of the check targets for all of the modules which are
+# compiled using $(TARGET_FLAGS_TO_PASS).
+CHECK_TARGET_MODULES = \
+ check-target-libstdc++-v3 \
+ check-target-newlib \
+ check-target-libf2c \
+ check-target-libobjc \
+ check-target-winsup \
+ check-target-libiberty \
+ check-target-libffi \
+ check-target-libjava \
+ check-target-zlib \
+ check-target-boehm-gc \
+ check-target-qthreads \
+ check-target-gperf
+
+# This is a list of the install targets for all of the modules which are
+# compiled using $(TARGET_FLAGS_TO_PASS).
+INSTALL_TARGET_MODULES = \
+ install-target-libstdc++-v3 \
+ install-target-newlib \
+ install-target-libf2c \
+ install-target-libobjc \
+ install-target-libtermcap \
+ install-target-winsup \
+ install-target-libgloss \
+ install-target-libiberty \
+ install-target-libjava \
+ install-target-zlib \
+ install-target-boehm-gc \
+ install-target-qthreads \
+ install-target-gperf
+
+# This is a list of the targets for which we can do a clean-{target}.
+CLEAN_MODULES = [+ FOR host_modules +][+ IF no_clean +][+ ELSE no_clean +]\
+ clean-[+module+] [+ ENDIF no_clean +][+ ENDFOR host_modules +]
+
+# All of the target modules that can be cleaned
+CLEAN_TARGET_MODULES = \
+ clean-target-libstdc++-v3 \
+ clean-target-newlib \
+ clean-target-libf2c \
+ clean-target-libobjc \
+ clean-target-winsup \
+ clean-target-libgloss \
+ clean-target-libiberty \
+ clean-target-gperf \
+ clean-target-examples \
+ clean-target-libffi \
+ clean-target-libjava \
+ clean-target-zlib \
+ clean-target-boehm-gc \
+ clean-target-qthreads
+
+# All of the x11 modules that can be cleaned
+CLEAN_X11_MODULES = \
+ clean-gdb \
+ clean-expect \
+ clean-guile \
+ clean-tclX \
+ clean-tk \
+ clean-tix
+
+# The target built for a native build.
+.PHONY: all.normal
+all.normal: \
+ $(ALL_BUILD_MODULES) \
+ $(ALL_MODULES) \
+ $(ALL_X11_MODULES) \
+ $(ALL_TARGET_MODULES) \
+ all-gcc
+
+# Do a target for all the subdirectories. A ``make do-X'' will do a
+# ``make X'' in all subdirectories (because, in general, there is a
+# dependency (below) of X upon do-X, a ``make X'' will also do this,
+# but it may do additional work as well).
+# This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
+# because it is so large that it can easily overflow the command line
+# length limit on some systems.
+DO_X = \
+ do-clean \
+ do-distclean \
+ do-dvi \
+ do-info \
+ do-install-info \
+ do-installcheck \
+ do-mostlyclean \
+ do-maintainer-clean \
+ do-TAGS
+.PHONY: $(DO_X)
+$(DO_X):
+ @target=`echo $@ | sed -e 's/^do-//'`; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(SUBDIRS) -dummy-; do \
+ if [ -f ./$$i/Makefile ]; then \
+ case $$i in \
+ gcc) \
+ for flag in $(EXTRA_GCC_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ *) \
+ for flag in $(EXTRA_HOST_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ ;; \
+ esac ; \
+ if (cd ./$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ $${target}); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+ @target=`echo $@ | sed -e 's/^do-//'`; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(TARGET_CONFIGDIRS) -dummy-; do \
+ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ if (cd $(TARGET_SUBDIR)/$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ $${target}); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+
+# Here are the targets which correspond to the do-X targets.
+
+.PHONY: info installcheck dvi install-info
+.PHONY: clean distclean mostlyclean maintainer-clean realclean
+.PHONY: local-clean local-distclean local-maintainer-clean
+info: do-info
+installcheck: do-installcheck
+dvi: do-dvi
+
+# Make sure makeinfo is built before we do a `make info'.
+do-info: all-texinfo
+
+install-info: do-install-info dir.info
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ if [ -f dir.info ] ; then \
+ $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
+ else true ; fi
+
+local-clean:
+ -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log
+
+local-distclean:
+ -rm -f Makefile config.status config.cache mh-frag mt-frag
+ -if [ "$(TARGET_SUBDIR)" != "." ]; then \
+ rm -rf $(TARGET_SUBDIR); \
+ else true; fi
+ -rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile
+ -rm -f texinfo/doc/Makefile texinfo/po/POTFILES
+ -rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null
+ -rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null
+ -rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null
+
+local-maintainer-clean:
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+clean: do-clean local-clean
+mostlyclean: do-mostlyclean local-clean
+distclean: do-distclean local-clean local-distclean
+maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
+maintainer-clean: local-distclean
+realclean: maintainer-clean
+
+# This rule is used to clean specific modules.
+.PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc
+$(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc:
+ @dir=`echo $@ | sed -e 's/clean-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \
+ else \
+ true; \
+ fi
+
+.PHONY: $(CLEAN_TARGET_MODULES)
+$(CLEAN_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/clean-target-//'`; \
+ rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \
+ else \
+ true; \
+ fi
+
+clean-target: $(CLEAN_TARGET_MODULES) clean-target-libgcc
+clean-target-libgcc:
+ test ! -d gcc/libgcc || \
+ (cd gcc/libgcc && find . -type d -print) | \
+ while read d; do rm -f gcc/$$d/libgcc.a || : ; done
+ -rm -rf gcc/libgcc
+
+# Check target.
+
+.PHONY: check do-check
+check:
+ $(MAKE) do-check NOTPARALLEL=parallel-ok
+
+do-check: $(CHECK_MODULES) \
+ $(CHECK_TARGET_MODULES) \
+ $(CHECK_X11_MODULES) \
+ check-gcc
+
+# Automated reporting of test results.
+
+warning.log: build.log
+ $(srcdir)/contrib/warn_summary build.log > $@
+
+mail-report.log:
+ if test x'$(BOOT_CFLAGS)' != x''; then \
+ BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \
+ fi; \
+ $(srcdir)/contrib/test_summary -t >$@
+ chmod +x $@
+ echo If you really want to send e-mail, run ./$@ now
+
+mail-report-with-warnings.log: warning.log
+ if test x'$(BOOT_CFLAGS)' != x''; then \
+ BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \
+ fi; \
+ $(srcdir)/contrib/test_summary -t -i warning.log >$@
+ chmod +x $@
+ echo If you really want to send e-mail, run ./$@ now
+
+# Installation targets.
+
+.PHONY: install install-cross uninstall source-vault binary-vault vault-install
+install: $(INSTALL_TARGET)
+install-cross: $(INSTALL_TARGET_CROSS)
+
+uninstall:
+ @echo "the uninstall target is not supported in this tree"
+
+source-vault:
+ $(MAKE) -f ./release/Build-A-Release \
+ host=$(host_alias) source-vault
+
+binary-vault:
+ $(MAKE) -f ./release/Build-A-Release \
+ host=$(host_alias) target=$(target_alias)
+
+vault-install:
+ @if [ -f ./release/vault-install ] ; then \
+ ./release/vault-install $(host_alias) $(target_alias) ; \
+ else \
+ true ; \
+ fi
+
+.PHONY: install.all
+install.all: install-no-fixedincludes
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`${PWD}` ; export r ; \
+ $(SET_LIB_PATH) \
+ (cd ./gcc; \
+ $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
+ else \
+ true ; \
+ fi
+
+# install-no-fixedincludes is used because Cygnus can not distribute
+# the fixed header files.
+.PHONY: install-no-fixedincludes
+install-no-fixedincludes: \
+ installdirs \
+ $(INSTALL_MODULES) \
+ $(INSTALL_TARGET_MODULES) \
+ $(INSTALL_X11_MODULES) \
+ gcc-no-fixedincludes
+
+# Install the gcc headers files, but not the fixed include files,
+# which Cygnus is not allowed to distribute. This rule is very
+# dependent on the workings of the gcc Makefile.in.
+.PHONY: gcc-no-fixedincludes
+gcc-no-fixedincludes:
+ @if [ -f ./gcc/Makefile ]; then \
+ rm -rf gcc/tmp-include; \
+ mv gcc/include gcc/tmp-include 2>/dev/null; \
+ mkdir gcc/include; \
+ cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
+ touch gcc/stmp-fixinc gcc/include/fixed; \
+ rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}` ; export s; \
+ $(SET_LIB_PATH) \
+ (cd ./gcc; \
+ $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ rm -rf gcc/include; \
+ mv gcc/tmp-include gcc/include 2>/dev/null; \
+ else true; fi
+
+# This rule is used to build the modules which are built with the
+# build machine's native compiler.
+.PHONY: $(ALL_BUILD_MODULES)
+$(ALL_BUILD_MODULES):
+ dir=`echo $@ | sed -e 's/all-build-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ (cd $(BUILD_SUBDIR)/$${dir} && $(MAKE) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to configure the modules which are built with the
+# native tools.
+.PHONY: $(CONFIGURE_BUILD_MODULES)
+$(CONFIGURE_BUILD_MODULES):
+ @dir=`echo $@ | sed -e 's/configure-build-//'`; \
+ if [ ! -d $(BUILD_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(BUILD_SUBDIR)/$${dir}/Makefile ] ; then \
+ true; \
+ elif echo " $(BUILD_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/$${dir} ]; then \
+ [ -d $(BUILD_SUBDIR)/$${dir} ] || mkdir $(BUILD_SUBDIR)/$${dir};\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ AR="$(AR_FOR_BUILD)"; export AR; \
+ AS="$(AS_FOR_BUILD)"; export AS; \
+ CC="$(CC_FOR_BUILD)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
+ CXX="$(CXX_FOR_BUILD)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
+ LD="$(LD_FOR_BUILD)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
+ NM="$(NM_FOR_BUILD)"; export NM; \
+ RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
+ echo Configuring in $(BUILD_SUBDIR)/$${dir}; \
+ cd "$(BUILD_SUBDIR)/$${dir}" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(BUILD_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(BUILD_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/$${dir}"; \
+ libsrcdir="$$s/$${dir}"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(BUILD_CONFIGARGS) $${srcdiroption} \
+ --with-build-subdir="$(BUILD_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(BUILD_CONFIGARGS) $${srcdiroption} \
+ --with-build-subdir="$(BUILD_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir $${dir} || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+# This rule is used to build the modules which use FLAGS_TO_PASS. To
+# build a target all-X means to cd to X and make all.
+#
+# all-gui, and all-libproc are handled specially because
+# they are still experimental, and if they fail to build, that
+# shouldn't stop "make all".
+.PHONY: $(ALL_MODULES) all-gui all-libproc
+$(ALL_MODULES) all-gui all-libproc:
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# These rules are used to check the modules which use FLAGS_TO_PASS.
+# To build a target check-X means to cd to X and make check. Some
+# modules are only tested in a native toolchain.
+
+.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+$(NATIVE_CHECK_MODULES):
+ @if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+ dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi; \
+ fi
+
+$(CROSS_CHECK_MODULES):
+ @dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(INSTALL_MODULES)
+$(INSTALL_MODULES): installdirs
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# This rule is used to configure the modules which are built with the
+# target tools.
+.PHONY: $(CONFIGURE_TARGET_MODULES)
+$(CONFIGURE_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/configure-target-//'`; \
+ if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for $${dir}, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \
+ mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=`echo $@ | sed -e 's/configure-target-//'`; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/$${dir} ]; then \
+ [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
+ cd "$(TARGET_SUBDIR)/$${dir}" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/$${dir}"; \
+ libsrcdir="$$s/$${dir}"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir $${dir} || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
+# To build a target all-X means to cd to X and make all.
+.PHONY: $(ALL_TARGET_MODULES)
+$(ALL_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/all-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/$${dir}; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(CHECK_TARGET_MODULES)
+$(CHECK_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/check-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/$${dir}; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use
+# TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
+# and make install.
+.PHONY: $(INSTALL_TARGET_MODULES)
+$(INSTALL_TARGET_MODULES): installdirs
+ @dir=`echo $@ | sed -e 's/install-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/$${dir}; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# This rule is used to build the modules which use X11_FLAGS_TO_PASS.
+# To build a target all-X means to cd to X and make all.
+.PHONY: $(ALL_X11_MODULES)
+$(ALL_X11_MODULES):
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; \
+ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to check the modules which use X11_FLAGS_TO_PASS.
+# To build a target check-X means to cd to X and make all.
+.PHONY: $(CHECK_X11_MODULES)
+$(CHECK_X11_MODULES):
+ @dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; \
+ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use X11_FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(INSTALL_X11_MODULES)
+$(INSTALL_X11_MODULES): installdirs
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; \
+ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# gcc is the only module which uses GCC_FLAGS_TO_PASS.
+.PHONY: all-gcc
+all-gcc:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# Building GCC uses some tools for rebuilding "source" files
+# like texinfo, bison/byacc, etc. So we must depend on those.
+#
+# While building GCC, it may be necessary to run various target
+# programs like the assembler, linker, etc. So we depend on
+# those too.
+#
+# In theory, on an SMP all those dependencies can be resolved
+# in parallel.
+#
+.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean
+bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean: all-bootstrap
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ echo "Bootstrapping the compiler"; \
+ cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $@
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ case "$@" in \
+ *bootstrap4-lean ) \
+ msg="Comparing stage3 and stage4 of the compiler"; \
+ compare=compare3-lean ;; \
+ *bootstrap4 ) msg="Comparing stage3 and stage4 of the compiler"; \
+ compare=compare3 ;; \
+ *-lean ) msg="Comparing stage2 and stage3 of the compiler"; \
+ compare=compare-lean ;; \
+ * ) msg="Comparing stage2 and stage3 of the compiler"; \
+ compare=compare ;; \
+ esac; \
+ $(SET_LIB_PATH) \
+ echo "$$msg"; \
+ cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $$compare
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}` ; export s; \
+ $(SET_LIB_PATH) \
+ echo "Building runtime libraries"; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
+
+.PHONY: cross
+cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ echo "Building the C and C++ compiler"; \
+ cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++"
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}` ; export s; \
+ $(SET_LIB_PATH) \
+ echo "Building runtime libraries"; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) \
+ LANGUAGES="c c++" all
+
+.PHONY: check-gcc
+check-gcc:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-c++
+check-c++:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
+ $(MAKE) check-target-libstdc++-v3; \
+ else \
+ true; \
+ fi
+
+.PHONY: install-gcc
+install-gcc:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+.PHONY: install-gcc-cross
+install-gcc-cross:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++" install); \
+ else \
+ true; \
+ fi
+# EXPERIMENTAL STUFF
+# This rule is used to install the modules which use FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: install-dosrel
+install-dosrel: installdirs info
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+install-dosrel-fake:
+
+ALL_GCC = all-gcc
+ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss
+ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++-v3
+
+# This is a list of inter-dependencies among modules.
+all-ash:
+all-autoconf: all-m4 all-texinfo
+all-automake: all-m4 all-texinfo
+all-bash:
+all-bfd: all-libiberty all-intl
+all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc all-intl
+all-bison: all-texinfo
+configure-target-boehm-gc: $(ALL_GCC_C) configure-target-qthreads
+all-target-boehm-gc: configure-target-boehm-gc
+all-byacc:
+all-bzip2:
+all-db:
+all-dejagnu: all-tcl all-expect all-tk
+all-diff: all-libiberty
+all-etc:
+configure-target-examples: $(ALL_GCC_C)
+all-target-examples: configure-target-examples
+all-expect: all-tcl all-tk
+all-fileutils: all-libiberty
+all-findutils:
+all-find:
+all-flex: all-libiberty all-bison all-byacc
+all-gas: all-libiberty all-opcodes all-bfd all-intl
+all-gawk:
+all-gcc: all-bison all-byacc all-binutils all-gas all-ld all-zlib
+all-bootstrap: all-libiberty all-texinfo all-bison all-byacc all-binutils all-gas all-ld all-zlib
+GDB_TK = all-tk all-tcl all-itcl all-tix all-libgui
+all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-bison all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
+all-gettext:
+all-gnuserv:
+configure-target-gperf: $(ALL_GCC_CXX)
+all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++-v3
+all-gprof: all-libiberty all-bfd all-opcodes all-intl
+all-grep: all-libiberty
+all-gui: all-gdb all-libproc
+all-guile:
+all-gzip: all-libiberty
+all-hello: all-libiberty
+all-indent:
+all-intl:
+all-itcl: all-tcl all-tk
+all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex all-intl
+configure-target-libgloss: $(ALL_GCC)
+all-target-libgloss: configure-target-libgloss configure-target-newlib
+all-libgui: all-tcl all-tk all-itcl
+all-libiberty:
+
+all-build-libiberty: configure-build-libiberty
+
+configure-target-libffi: $(ALL_GCC_C)
+all-target-libffi: configure-target-libffi
+configure-target-libjava: $(ALL_GCC_C) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi
+all-target-libjava: configure-target-libjava all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
+configure-target-libstdc++-v3: $(ALL_GCC_C)
+all-target-libstdc++-v3: configure-target-libstdc++-v3 all-target-libiberty
+all-libtool:
+configure-target-libf2c: $(ALL_GCC_C)
+all-target-libf2c: configure-target-libf2c all-target-libiberty
+configure-target-libobjc: $(ALL_GCC_C)
+all-target-libobjc: configure-target-libobjc all-target-libiberty
+all-m4: all-libiberty all-texinfo
+all-make: all-libiberty
+all-mmalloc:
+configure-target-newlib: $(ALL_GCC)
+all-target-newlib: configure-target-newlib
+configure-target-libtermcap: $(ALL_GCC_C)
+all-target-libtermcap: configure-target-libtermcap
+all-opcodes: all-bfd all-libiberty
+all-patch: all-libiberty
+all-perl:
+all-prms: all-libiberty
+configure-target-qthreads: $(ALL_GCC_C)
+all-target-qthreads: configure-target-qthreads
+all-rcs:
+all-readline:
+all-recode: all-libiberty
+all-sed: all-libiberty
+all-send-pr: all-prms
+all-shellutils:
+all-sid: all-tcl all-tk
+all-sim: all-libiberty all-bfd all-opcodes all-readline
+all-snavigator: all-tcl all-tk all-itcl all-tix all-db all-grep all-libgui
+all-tar: all-libiberty
+all-tcl:
+all-tclX: all-tcl all-tk
+all-tk: all-tcl
+all-texinfo: all-libiberty
+all-textutils:
+all-time:
+all-tix: all-tcl all-tk
+all-wdiff:
+configure-target-winsup: $(ALL_GCC_C)
+all-target-winsup: all-target-libiberty all-target-libtermcap configure-target-winsup
+all-uudecode: all-libiberty
+all-zip:
+all-zlib:
+configure-target-zlib: $(ALL_GCC_C)
+all-target-zlib: configure-target-zlib
+all-fastjar: all-zlib all-libiberty
+configure-target-fastjar: configure-target-zlib
+all-target-fastjar: configure-target-fastjar all-target-zlib all-target-libiberty
+configure-target-libiberty: $(ALL_GCC_C)
+all-target-libiberty: configure-target-libiberty
+all-target: $(ALL_TARGET_MODULES)
+install-target: $(INSTALL_TARGET_MODULES)
+install-gdb: install-tcl install-tk install-itcl install-tix install-libgui
+install-sid: install-tcl install-tk
+### other supporting targets
+
+MAKEDIRS= \
+ $(DESTDIR)$(prefix) \
+ $(DESTDIR)$(exec_prefix)
+.PHONY: installdirs
+installdirs: mkinstalldirs
+ $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
+
+dir.info: do-install-info
+ if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
+ $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
+ mv -f dir.info.new dir.info ; \
+ else true ; \
+ fi
+
+dist:
+ @echo "Building a full distribution of this tree isn't done"
+ @echo "via 'make dist'. Check out the etc/ subdirectory"
+
+etags tags: TAGS
+
+# Right now this just builds TAGS in each subdirectory. emacs19 has the
+# ability to use several tags files at once, so there is probably no need
+# to combine them into one big TAGS file (like CVS 1.3 does). We could
+# (if we felt like it) have this Makefile write a piece of elisp which
+# the user could load to tell emacs19 where all the TAGS files we just
+# built are.
+TAGS: do-TAGS
+
+# Rebuilding Makefile.in, using autogen.
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def
+ cd $(srcdir) && autogen Makefile.def
+
+# with the gnu make, this is done automatically.
+
+Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag) $(gcc_version_trigger)
+ $(SHELL) ./config.status
+
+#
+# Support for building net releases
+
+# Files in devo used in any net release.
+# ChangeLog omitted because it may refer to files which are not in this
+# distribution (perhaps it would be better to include it anyway).
+DEVO_SUPPORT= README Makefile.in configure configure.in \
+ config.guess config.if config.sub config move-if-change \
+ mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
+ COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
+ mkinstalldirs ltconfig ltmain.sh missing ylwrap \
+ libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh
+
+# Files in devo/etc used in any net release.
+# ChangeLog omitted because it may refer to files which are not in this
+# distribution (perhaps it would be better to include it anyway).
+ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
+ make-stds.texi standards.info* configure.texi configure.info* \
+ configbuild.* configdev.*
+
+
+# When you use `make setup-dirs' or `make taz' you should always redefine
+# this macro.
+SUPPORT_FILES = list-of-support-files-for-tool-in-question
+
+# NOTE: No double quotes in the below. It is used within shell script
+# as VER="$(VER)"
+VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
+ sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
+ elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
+ sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
+ elif test -f $(TOOL)/version.in; then \
+ head -1 $(TOOL)/version.in; \
+ elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
+ sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
+ else \
+ echo VERSION; \
+ fi`
+PACKAGE = $(TOOL)
+
+.PHONY: taz
+taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+ $(MAKE) -f Makefile.in do-proto-toplev \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+ $(MAKE) -f Makefile.in do-md5sum \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+ $(MAKE) -f Makefile.in do-tar \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+ $(MAKE) -f Makefile.in do-bz2 \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+
+.PHONY: gdb-tar
+gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+ $(MAKE) -f Makefile.in do-proto-toplev \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+ $(MAKE) -f Makefile.in do-md5sum \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+ $(MAKE) -f Makefile.in do-djunpack \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+ $(MAKE) -f Makefile.in do-tar \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+
+.PHONY: gdb-taz
+gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+ $(MAKE) -f Makefile.in gdb-tar \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+ $(MAKE) -f Makefile.in do-bz2 \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+
+.PHONY: do-proto-toplev
+do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+ echo "==> Making $(PACKAGE)-$(VER)/"
+ # Take out texinfo from a few places.
+ sed -e '/^all\.normal: /s/\all-texinfo //' \
+ -e '/^ install-texinfo /d' \
+ <Makefile.in >tmp
+ mv -f tmp Makefile.in
+ #
+ ./configure sun4
+ [ -z "$(CONFIGURE_TARGET_MODULES)" ] \
+ || $(MAKE) $(CONFIGURE_TARGET_MODULES) \
+ ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
+ CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
+ # Make links, and run "make diststuff" or "make info" when needed.
+ rm -rf proto-toplev ; mkdir proto-toplev
+ set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
+ for d in $$dirs ; do \
+ if [ -d $$d ]; then \
+ if [ ! -f $$d/Makefile ] ; then true ; \
+ elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
+ (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
+ elif grep '^info:' $$d/Makefile >/dev/null ; then \
+ (cd $$d ; $(MAKE) info ) || exit 1 ; \
+ fi ; \
+ if [ -d $$d/proto-$$d.dir ]; then \
+ ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
+ else \
+ ln -s ../$$d proto-toplev/$$d ; \
+ fi ; \
+ else ln -s ../$$d proto-toplev/$$d ; fi ; \
+ done
+ cd etc && $(MAKE) info
+ $(MAKE) distclean
+ #
+ mkdir proto-toplev/etc
+ (cd proto-toplev/etc; \
+ for i in $(ETC_SUPPORT); do \
+ ln -s ../../etc/$$i . ; \
+ done)
+ #
+ # Take out texinfo from configurable dirs
+ rm proto-toplev/configure.in
+ sed -e '/^host_tools=/s/texinfo //' \
+ <configure.in >proto-toplev/configure.in
+ #
+ mkdir proto-toplev/texinfo
+ ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
+ if test -r texinfo/util/tex3patch ; then \
+ mkdir proto-toplev/texinfo/util && \
+ ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
+ else true; fi
+ chmod -R og=u . || chmod og=u `find . -print`
+ #
+ # Create .gmo files from .po files.
+ for f in `find . -name '*.po' -type f -print`; do \
+ msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
+ done
+ #
+ -rm -f $(PACKAGE)-$(VER)
+ ln -s proto-toplev $(PACKAGE)-$(VER)
+
+.PHONY: do-tar
+do-tar:
+ echo "==> Making $(PACKAGE)-$(VER).tar"
+ -rm -f $(PACKAGE)-$(VER).tar
+ find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
+ | tar cTfh - $(PACKAGE)-$(VER).tar
+
+.PHONY: do-bz2
+do-bz2:
+ echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
+ -rm -f $(PACKAGE)-$(VER).tar.bz2
+ $(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
+
+.PHONY: do-md5sum
+do-md5sum:
+ echo "==> Adding md5 checksum to top-level directory"
+ cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \
+ | xargs $(MD5PROG) > ../md5.sum
+ mv md5.sum proto-toplev
+
+.PHONY: do-djunpack
+do-djunpack:
+ echo "==> Adding updated djunpack.bat to top-level directory"
+ echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/'
+ sed < djunpack.bat > djunpack.new \
+ -e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/'
+ mv djunpack.new djunpack.bat
+ -rm -f proto-toplev/djunpack.bat
+ ln -s ../djunpack.bat proto-toplev/djunpack.bat
+
+TEXINFO_SUPPORT= texinfo/texinfo.tex
+DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
+
+.PHONY: gas.tar.bz2
+GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
+gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
+ $(MAKE) -f Makefile.in taz TOOL=gas \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
+
+# The FSF "binutils" release includes gprof and ld.
+.PHONY: binutils.tar.bz2
+BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep
+binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
+ $(MAKE) -f Makefile.in taz TOOL=binutils \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
+
+.PHONY: gas+binutils.tar.bz2
+GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
+gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
+ $(MAKE) -f Makefile.in taz TOOL=gas \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
+
+GNATS_SUPPORT_DIRS=include libiberty send-pr
+gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
+ $(MAKE) -f Makefile.in taz TOOL=gnats \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
+
+.PHONY: gdb.tar.bz2
+GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
+gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
+.PHONY: gdb.tar
+gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
+
+DEJAGNU_SUPPORT_DIRS= tcl expect libiberty
+.PHONY: dejagnu.tar.bz2
+dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
+ $(MAKE) -f Makefile.in taz TOOL=dejagnu \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"
+
+.PHONY: gdb+dejagnu.tar.bz2
+GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu
+gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
+.PHONY: gdb+dejagnu.tar
+gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
+
+.PHONY: insight.tar.bz2
+INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
+insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
+.PHONY: insight.tar
+insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
+
+.PHONY: insight+dejagnu.tar.bz2
+INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
+insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
+.PHONY: insight+dejagnu.tar
+insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
+
+.PHONY: newlib.tar.bz2
+NEWLIB_SUPPORT_DIRS=libgloss
+# taz configures for the sun4 target which won't configure newlib.
+# We need newlib configured so that the .info files are made.
+# Unfortunately, it is not enough to just configure newlib separately:
+# taz will build the .info files but since SUBDIRS won't contain newlib,
+# distclean won't be run (leaving Makefile, config.status, and the tmp files
+# used in building the .info files, eg: *.def, *.ref).
+# The problem isn't solvable however without a lot of extra work because
+# target libraries are built in subdir $(target_alias) which gets nuked during
+# the make distclean. For now punt on the issue of shipping newlib info files
+# with newlib net releases and wait for a day when some native target (sun4?)
+# supports newlib (if only minimally).
+newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
+ $(MAKE) -f Makefile.in taz TOOL=newlib \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
+ DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
+
+.NOEXPORT:
+MAKEOVERRIDES=
+
+# end of Makefile.in
Index: configure.in
===================================================================
RCS file: /cvs/gcc/gcc/configure.in,v
retrieving revision 1.180
diff -u -3 -r1.180 configure.in
--- configure.in 22 Sep 2002 17:57:06 -0000 1.180
+++ configure.in 22 Sep 2002 20:36:10 -0000
@@ -80,22 +80,6 @@
################################################################################
-## These two lists are of directories that are to be removed from the
-## ${configdirs} list for either cross-compilations or for native-
-## compilations. For example, it doesn't make that much sense to
-## cross-compile Emacs, nor is it terribly useful to compile target-libiberty in
-## a native environment.
-
-# directories to be built in the native environment only
-#
-# This must be a single line because of the way it is searched by grep in
-# the code below.
-native_only="autoconf automake libtool fileutils find gawk gettext grep gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms snavigator gnuserv target-gperf"
-
-# directories to be built in a cross environment only
-#
-cross_only="target-libgloss target-newlib target-opcodes"
-
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
## is important because configure will choke if they ever get through.
@@ -184,8 +168,12 @@
esac
# Some tools are only suitable for building in a "native" situation.
-# Remove these if host!=target. Similarly, some are only suitable
-# for cross toolchains; remove if host=target.
+# Remove these if host!=target.
+native_only="autoconf automake libtool fileutils find gawk gettext grep gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms snavigator gnuserv target-gperf"
+
+# Similarly, some are only suitable for cross toolchains.
+# Remove these if host=target.
+cross_only="target-libgloss target-newlib target-opcodes"
case $is_cross_compiler in
no) skipdirs="${skipdirs} ${cross_only}" ;;
@@ -755,8 +743,7 @@
dirname=`echo $dir | sed -e s/target-//g`
if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
- if test -r $srcdir/$dirname/configure \
- || test -r $srcdir/$dirname/configure.in ; then
+ if test -r $srcdir/$dirname/configure ; then
if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
true
else
@@ -766,8 +753,7 @@
fi
if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
- if test -r $srcdir/$dirname/configure \
- || test -r $srcdir/$dirname/configure.in ; then
+ if test -r $srcdir/$dirname/configure ; then
if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
true
else
@@ -783,7 +769,7 @@
others=
for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
if test "$i" != "libiberty" ; then
- if test -r $srcdir/$i/configure || test -r $srcdir/$i/configure.in ; then
+ if test -r $srcdir/$i/configure ; then
others=yes;
break;
fi
Index: contrib/gcc_update
===================================================================
RCS file: /cvs/gcc/gcc/contrib/gcc_update,v
retrieving revision 1.37
diff -u -3 -r1.37 gcc_update
--- contrib/gcc_update 16 Jul 2002 22:03:34 -0000 1.37
+++ contrib/gcc_update 22 Sep 2002 20:36:11 -0000
@@ -104,6 +104,8 @@
libjava/libltdl/Makefile.in: libjava/libltdl/Makefile.am libjava/libltdl/configure.in libjava/libltdl/aclocal.m4
libjava/libltdl/configure: libjava/libltdl/configure.in libjava/libltdl/aclocal.m4
libjava/libltdl/stamp-h.in: libjava/libltdl/configure.in libjava/libltdl/aclocal.m4 libjava/libltdl/acconfig.h
+# Top level
+Makefile.in: Makefile.tpl Makefile.def
EOF
}