This is the mail archive of the
gcc@gcc.gnu.org
mailing list for the GCC project.
Re: Link tests after GCC_NO_EXECUTABLES
Mark Mitchell <mark@codesourcery.com> writes:
> However, I think there's a solution. In particular, on
> libstdc++-v3/configure.ac, we do:
>
> AC_LIBTOOL_DLOPEN
> AM_PROG_LIBTOOL
>
> The AC_LIBTOOL_DLOPEN call enables checking for dlopen support in
> libtool. The libtool documentation says:
>
> Enable checking for dlopen support. This macro should be used if
> the package makes use of the `-dlopen' and `-dlpreopen' flags,
> otherwise libtool will assume that the system does not support
> dlopening. The macro must be called *before* `AC_PROG_LIBTOOL'.
>
> But, for a bare-metal toolchain, I don't think we need that. So, I'm
> guessing that:
>
> if test "x${with_newlib}" != "xyes"; then
> AC_LIBTOOL_DLOPEN
> fi
>
> will fix the problem. (We already have checks for $with_newlib
> elsewhere in configure.ac, so I think this is in the same spirit, though
> a libstdc++ maintainer would of course be best to review the patch.)
I built a version of binutils that treated an undefined _start as
a hard error. (I also had another local binutils patch to fix an
unrelated .eh_frame_hdr problem.) Reverting the libgloss change
and applying the change above introduced no regressions.
Applying this patch would revert to the previous situation of
libgfortran being unbuildable for mips*-elf*. That's not a regression
from previous releases, and I'm not sure how useful the status quo is.
Even though current mainline can build libgfortran, all tests fail for
simulator testing, and I'm not sure whether you could get it work for
bare-metal boards or not. It sounds like we've agreed that, if we want
to support libgfortran on targets like mips*-elf*, we should use
libstd++-like with_newlib checks there too.
Perhaps we should turn target-libgfortran off by default for mips*-elf*.
I'll work on a patch to do that if this one is OK.
Richard
Revert:
2007-09-10 Rask Ingemann Lambertsen <rask@sygehus.dk>
PR other/32154
* configure.ac: For libgloss targets, point the linker to the linker
script, startup code and simulator library.
* configure: Regenerate.
libstdc++-v3/
2007-xx-xx Mark Mitchell <mark@codesourcery.com>
* configure.ac: Don't check AC_LIBTOOL_DLOPEN if using newlib.
* configure: Regenerate.
Index: configure.ac
===================================================================
--- configure.ac (revision 130491)
+++ configure.ac (working copy)
@@ -399,9 +399,6 @@ if test x$enable_libgomp = x ; then
esac
fi
-# Default libgloss CPU subdirectory.
-libgloss_dir="$target_cpu"
-
case "${target}" in
*-*-chorusos)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
@@ -507,7 +504,6 @@ case "${target}" in
*) noconfigdirs="$noconfigdirs gdb readline"
;;
esac
- libgloss_dir=wince
;;
arc-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
@@ -516,11 +512,9 @@ case "${target}" in
;;
arm-*-coff | strongarm-*-coff | xscale-*-coff)
noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=arm
;;
arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
- libgloss_dir=arm
;;
arm*-*-linux-gnueabi)
noconfigdirs="$noconfigdirs target-qthreads"
@@ -528,11 +522,9 @@ case "${target}" in
case ${with_newlib} in
no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
esac
- libgloss_dir=arm
;;
arm*-*-symbianelf*)
noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
- libgloss_dir=arm
;;
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
@@ -579,7 +571,6 @@ case "${target}" in
unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
esac
- libgloss_dir=cris
;;
crx-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
@@ -590,9 +581,6 @@ case "${target}" in
d30v-*-*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
- ep9312-*-elf | ep9312-*-coff)
- libgloss_dir=arm
- ;;
fr30-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
@@ -624,9 +612,6 @@ case "${target}" in
hppa*-hp-hpux11*)
noconfigdirs="$noconfigdirs ld shellutils"
;;
- hppa*-*-pro*)
- libgloss_dir=pa
- ;;
hppa*-*-*)
# According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
# build on HP-UX 10.20.
@@ -647,7 +632,6 @@ case "${target}" in
;;
i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=i386
;;
i[[3456789]]86-*-linux*)
# The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
@@ -717,7 +701,6 @@ case "${target}" in
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
- libgloss_dir=m68hc11
;;
m68k-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
@@ -725,9 +708,6 @@ case "${target}" in
m68k-*-coff*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- m68*-*-* | fido-*-*)
- libgloss_dir=m68k
- ;;
mcore-*-pe*)
# The EPOC C++ environment does not support exceptions or rtti,
# and so building libstdc++-v3 tends not to always work.
@@ -759,17 +739,14 @@ case "${target}" in
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
- libgloss_dir=rs6000
;;
powerpc-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
powerpc-*-eabi)
noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=rs6000
;;
powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
- libgloss_dir=rs6000
;;
rs6000-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
@@ -809,7 +786,6 @@ case "${target}" in
;;
mips*-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
- libgloss_dir=mips
;;
romp-*-*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
@@ -823,19 +799,14 @@ case "${target}" in
esac
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- sparclet-*-aout* | sparc86x-*-*)
- libgloss_dir=sparc
- ;;
sparc-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc64-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=sparc
;;
sparclite-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=sparc
;;
sparc-*-sunos4*)
noconfigdirs="$noconfigdirs ${libgcj}"
@@ -2360,19 +2331,6 @@ case " $target_configdirs " in
# for any libc-related directories first (so make it the last -B
# switch).
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
-
- # If we're building libgloss, find the startup file, simulator library
- # and linker script.
- case " $target_configdirs " in
- *" libgloss "*)
- # Look for startup file, simulator library and maybe linker script.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/'"$libgloss_dir"
- # Look for libnosys.a in case the target needs it.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys'
- # Most targets have the linker script in the source directory.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$s/libgloss/'"$libgloss_dir"
- ;;
- esac
;;
esac
;;
@@ -2410,6 +2368,16 @@ fi
# Search for other target-specific linker scripts and such.
case "${target}" in
+ m32c-*-* )
+ if test -d ${srcdir}/libgloss/m32c; then
+ # This is for crt0.o
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/m32c'
+ # This is for r8c.ld
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/m32c'
+ # This is for libnosys.a
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys'
+ fi
+ ;;
mep*)
FLAGS_FOR_TARGET="$FLAGS_FOR_TARGET -mlibrary"
;;
Index: libstdc++-v3/configure.ac
===================================================================
--- libstdc++-v3/configure.ac (revision 130491)
+++ libstdc++-v3/configure.ac (working copy)
@@ -82,7 +82,9 @@ AH_TEMPLATE(VERSION, [Version number of
# up critical shell variables.
GLIBCXX_CONFIGURE
-AC_LIBTOOL_DLOPEN
+if test "x${with_newlib}" != "xyes"; then
+ AC_LIBTOOL_DLOPEN
+fi
AM_PROG_LIBTOOL
AC_SUBST(enable_shared)
AC_SUBST(enable_static)