This is the mail archive of the gcc@gcc.gnu.org mailing list for the GCC project.

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

built egcs-1.0.1

Hello,
I built egcs-1.0.1 on linux 2.0.32 redhat 5.0.

There were some problems reported by "gmake -k check", which *may* be
related to the fact that the dejagnu snapshot on your egcs page did not
install without warnings. The output you requested ("config.guess.out")
is attached to this email messages, as are two additional files.

"dejagnu-971222.warn" gives the warning messages when configure is run
on my system, after extracting the tar file.

"make -k check.out" is the output obtained by running the command

make -k check >& filename

Are the unexpected failures in the test related to the inability of
dejagnu to properly configure itself? Am I missing some software?
Thanks.
	emil
i686-pc-linux-gnu

Configuring for a i686-pc-linux-gnu host.
Created "Makefile" in /usr/source/dejagnu-971222 using "config/mt-linux"
./config.status is unchanged
configure: warning: Can't find Tk configuration definitions
configure: warning: Can't find Itcl private headers
configure: warning: No X based programs will be built

gmake[1]: Entering directory `/egcs/build/etc'
gmake[1]: Nothing to be done for `check'.
gmake[1]: Leaving directory `/egcs/build/etc'
gmake[1]: Entering directory `/egcs/build/libiberty'
gmake[1]: Nothing to be done for `check'.
gmake[1]: Leaving directory `/egcs/build/libiberty'
gmake[1]: Entering directory `/egcs/build/texinfo'
gmake[1]: Nothing to be done for `check'.
gmake[1]: Leaving directory `/egcs/build/texinfo'
gmake[1]: Entering directory `/egcs/build/libiberty'
gmake[2]: Entering directory `/egcs/build/libiberty'
gmake[2]: Leaving directory `/egcs/build/libiberty'
gmake[1]: Leaving directory `/egcs/build/libiberty'
gmake[1]: Entering directory `/egcs/build/texinfo'
gmake[1]: Nothing to be done for `all'.
gmake[1]: Leaving directory `/egcs/build/texinfo'
gmake[1]: Entering directory `/egcs/build/gcc'
if [ -f libgcc2.ready ] ; then \
	true; \
else \
	touch libgcc2.ready; \
fi
case "c proto gcov  c++ f77 objc" in \
*f77*) top=`pwd`; \
  cd f/runtime && gmake \
    GCC_FOR_TARGET="`case '/egcs/build/gcc/xgcc -B/egcs/build/gcc/' in \
     './xgcc -B./') echo ${top}/xgcc -B${top}/;; \
     *) echo '/egcs/build/gcc/xgcc -B/egcs/build/gcc/';; esac`" \
    GCC_FLAGS="" CROSS="" AR_FLAGS="rc" AR="ar" BISON="bison" BISONFLAGS="" CC="gcc" CFLAGS="-g -O2" X_CFLAGS="" LDFLAGS="" LEX="flex" LEXFLAGS="" MAKEINFO="/egcs/build/texinfo/makeinfo/makeinfo " MAKEINFOFLAGS="" RANLIB="ranlib" RANLIB_TEST="[ -f /usr/bin/ranlib -o -f /bin/ranlib ]" SHELL="/bin/sh" exec_prefix="/usr/local" prefix="/usr/local" tooldir="/usr/local/i686-pc-linux-gnu" bindir="/usr/local/bin" libsubdir="/usr/local/lib/gcc-lib/i686-pc-linux-gnu/egcs-2.90.23" \
    all ;; \
esac
gmake[2]: Entering directory `/egcs/build/gcc/f/runtime'
gmake[2]: Nothing to be done for `all'.
gmake[2]: Leaving directory `/egcs/build/gcc/f/runtime'
gmake[1]: Leaving directory `/egcs/build/gcc'
gmake[1]: Entering directory `/egcs/build/libraries/libiberty'
gmake[2]: Entering directory `/egcs/build/libraries/libiberty'
gmake[2]: Leaving directory `/egcs/build/libraries/libiberty'
gmake[2]: Entering directory `/egcs/build/libraries/libiberty'
if [ -z "" ]; then \
  true; \
else \
  rootpre=`pwd`/; export rootpre; \
  srcrootpre=`cd /egcs/src/egcs-1.0.1/libiberty; pwd`/; export srcrootpre; \
  lib=`echo ${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \
  compiler="/egcs/build/gcc/xgcc -B/egcs/build/gcc/"; \
  for i in `${compiler} --print-multi-lib 2>/dev/null`; do \
    dir=`echo $i | sed -e 's/;.*$//'`; \
    if [ "${dir}" = "." ]; then \
      true; \
    else \
      if [ -d ../${dir}/${lib} ]; then \
	flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
	if (cd ../${dir}/${lib}; gmake "AR=ar" "AR_FLAGS=rc" "CC=/egcs/build/gcc/xgcc -B/egcs/build/gcc/" "CFLAGS=-g -O2" "LIBCFLAGS=-g -O2" "EXTRA_OFILES=" "HDEFINES=" "INSTALL=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c" "INSTALL_DATA=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c -m 644" "INSTALL_PROGRAM=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c " "LDFLAGS=" "LOADLIBES=" "PICFLAG=" "RANLIB=ranlib" "SHELL=/bin/sh" \
			CFLAGS="-g -O2 ${flags}" \
			CXXFLAGS="-O2 -g -fvtable-thunks ${flags}" \
			LIBCFLAGS="-g -O2 ${flags}" \
			LIBCXXFLAGS="-O2 -g -fvtable-thunks -fno-implicit-templates ${flags}" \
			all); then \
	  true; \
	else \
	  exit 1; \
	fi; \
      else true; \
      fi; \
    fi; \
  done; \
fi
gmake[2]: Leaving directory `/egcs/build/libraries/libiberty'
gmake[1]: Leaving directory `/egcs/build/libraries/libiberty'
gmake[1]: Entering directory `/egcs/build/libraries/libio'
gmake[2]: Entering directory `/egcs/build/libraries/libio'
if [ -z "" ]; then \
  true; \
else \
  rootpre=`pwd`/; export rootpre; \
  srcrootpre=`cd /egcs/src/egcs-1.0.1/libio; pwd`/; export srcrootpre; \
  lib=`echo ${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \
  compiler="/egcs/build/gcc/xgcc -B/egcs/build/gcc/"; \
  for i in `${compiler} --print-multi-lib 2>/dev/null`; do \
    dir=`echo $i | sed -e 's/;.*$//'`; \
    if [ "${dir}" = "." ]; then \
      true; \
    else \
      if [ -d ../${dir}/${lib} ]; then \
	flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
	if (cd ../${dir}/${lib}; gmake "INSTALL=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c" "INSTALL_DATA=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c -m 644" "INSTALL_PROGRAM=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c " "prefix=/usr/local" "exec_prefix=/usr/local" "tooldir=/usr/local/i686-pc-linux-gnu" "AR=ar" "AR_FLAGS=rc" "CC=/egcs/build/gcc/xgcc -B/egcs/build/gcc/" "CXX=/egcs/build/gcc/xgcc -B/egcs/build/gcc/" "CFLAGS=-g -O2" "CXXFLAGS=-O2 -g -fvtable-thunks" "NM=nm" "RANLIB=ranlib" "LIBCFLAGS=-g -O2" "LIBCXXFLAGS=-O2 -g -fvtable-thunks -fno-implicit-templates" "LOADLIBES=" "LDFLAGS=" "MAKEINFO=/egcs/build/texinfo/makeinfo/makeinfo " "SHLIB=" "SHCURSES=" "PICFLAG=" "RUNTESTFLAGS=" \
			CFLAGS="-g -O2 ${flags}" \
			CXXFLAGS="-O2 -g -fvtable-thunks ${flags}" \
			LIBCFLAGS="-g -O2 ${flags}" \
			LIBCXXFLAGS="-O2 -g -fvtable-thunks -fno-implicit-templates ${flags}" \
			all); then \
	  true; \
	else \
	  exit 1; \
	fi; \
      else true; \
      fi; \
    fi; \
  done; \
fi
gmake[2]: Leaving directory `/egcs/build/libraries/libio'
gmake[2]: Entering directory `/egcs/build/libraries/libio'
cd tests; make all ...
gmake[3]: Entering directory `/egcs/build/libraries/libio/tests'
gmake[3]: Leaving directory `/egcs/build/libraries/libio/tests'
cd dbz; make all ...
gmake[3]: Entering directory `/egcs/build/libraries/libio/dbz'
gmake[3]: Nothing to be done for `all'.
gmake[3]: Leaving directory `/egcs/build/libraries/libio/dbz'
cd stdio; make all ...
gmake[3]: Entering directory `/egcs/build/libraries/libio/stdio'
gmake[3]: Leaving directory `/egcs/build/libraries/libio/stdio'
cd testsuite; make all ...
gmake[3]: Entering directory `/egcs/build/libraries/libio/testsuite'
gmake[3]: Leaving directory `/egcs/build/libraries/libio/testsuite'
gmake[2]: Leaving directory `/egcs/build/libraries/libio'
gmake[1]: Leaving directory `/egcs/build/libraries/libio'
gmake[1]: Entering directory `/egcs/build/libraries/libstdc++'
cd ../libio ; gmake "INSTALL=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c" "INSTALL_DATA=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c -m 644" "INSTALL_PROGRAM=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c " "prefix=/usr/local" "exec_prefix=/usr/local" "tooldir=/usr/local/i686-pc-linux-gnu" "AR=ar" "AR_FLAGS=rc" "CC=/egcs/build/gcc/xgcc -B/egcs/build/gcc/" "CXX=/egcs/build/gcc/xgcc -B/egcs/build/gcc/" "CFLAGS=-g -O2" "CXXFLAGS=-O2 -g -fvtable-thunks" "NM=nm" "RANLIB=ranlib" "LIBCFLAGS=-g -O2" "LIBCXXFLAGS=-O2 -g -fvtable-thunks -fno-implicit-templates" "LOADLIBES=" "LDFLAGS=" "MAKEINFO=/egcs/build/texinfo/makeinfo/makeinfo " "SHLIB=libstdc++.so.2.8.0" "SHCURSES=" "PICFLAG=" "RUNTESTFLAGS=" iostream.list
gmake[2]: Entering directory `/egcs/build/libraries/libio'
gmake[2]: `iostream.list' is up to date.
gmake[2]: Leaving directory `/egcs/build/libraries/libio'
gmake[2]: Entering directory `/egcs/build/libraries/libstdc++'
if [ -z "" ]; then \
  true; \
else \
  rootpre=`pwd`/; export rootpre; \
  srcrootpre=`cd /egcs/src/egcs-1.0.1/libstdc++; pwd`/; export srcrootpre; \
  lib=`echo ${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \
  compiler="/egcs/build/gcc/xgcc -B/egcs/build/gcc/"; \
  for i in `${compiler} --print-multi-lib 2>/dev/null`; do \
    dir=`echo $i | sed -e 's/;.*$//'`; \
    if [ "${dir}" = "." ]; then \
      true; \
    else \
      if [ -d ../${dir}/${lib} ]; then \
	flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
	if (cd ../${dir}/${lib}; gmake "INSTALL=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c" "INSTALL_DATA=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c -m 644" "INSTALL_PROGRAM=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c " "prefix=/usr/local" "exec_prefix=/usr/local" "tooldir=/usr/local/i686-pc-linux-gnu" "AR=ar" "AR_FLAGS=rc" "CC=/egcs/build/gcc/xgcc -B/egcs/build/gcc/" "CXX=/egcs/build/gcc/xgcc -B/egcs/build/gcc/" "CFLAGS=-g -O2" "CXXFLAGS=-O2 -g -fvtable-thunks" "NM=nm" "RANLIB=ranlib" "LIBCFLAGS=-g -O2" "LIBCXXFLAGS=-O2 -g -fvtable-thunks -fno-implicit-templates" "LOADLIBES=" "LDFLAGS=" "MAKEINFO=/egcs/build/texinfo/makeinfo/makeinfo " "SHLIB=libstdc++.so.2.8.0" "SHCURSES=" "PICFLAG=" "RUNTESTFLAGS=" \
			CFLAGS="-g -O2 ${flags}" \
			CXXFLAGS="-O2 -g -fvtable-thunks ${flags}" \
			LIBCFLAGS="-g -O2 ${flags}" \
			LIBCXXFLAGS="-O2 -g -fvtable-thunks -fno-implicit-templates ${flags}" \
			all); then \
	  true; \
	else \
	  exit 1; \
	fi; \
      else true; \
      fi; \
    fi; \
  done; \
fi
gmake[2]: Leaving directory `/egcs/build/libraries/libstdc++'
gmake[2]: Entering directory `/egcs/build/libraries/libstdc++'
cd tests; make all ...
gmake[3]: Entering directory `/egcs/build/libraries/libstdc++/tests'
gmake[3]: Leaving directory `/egcs/build/libraries/libstdc++/tests'
cd testsuite; make all ...
gmake[3]: Entering directory `/egcs/build/libraries/libstdc++/testsuite'
gmake[3]: Leaving directory `/egcs/build/libraries/libstdc++/testsuite'
gmake[2]: Leaving directory `/egcs/build/libraries/libstdc++'
gmake[1]: Leaving directory `/egcs/build/libraries/libstdc++'
gmake[1]: Entering directory `/egcs/build/libraries/libio'
rootme=`pwd`/; export rootme; \
SAVE_LLPATH="${SAVE_LLPATH-$LD_LIBRARY_PATH}"; export SAVE_LLPATH; \
LD_LIBRARY_PATH="${rootme}../libstdc++:${rootme}../libg++:$SAVE_LLPATH"; \
export LD_LIBRARY_PATH; \
gmake "DODIRS=tests dbz stdio testsuite" DO=check "INSTALL=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c" "INSTALL_DATA=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c -m 644" "INSTALL_PROGRAM=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c " "prefix=/usr/local" "exec_prefix=/usr/local" "tooldir=/usr/local/i686-pc-linux-gnu" "AR=ar" "AR_FLAGS=rc" "CC=/egcs/build/gcc/xgcc -B/egcs/build/gcc/" "CXX=/egcs/build/gcc/xgcc -B/egcs/build/gcc/" "CFLAGS=-g -O2" "CXXFLAGS=-O2 -g -fvtable-thunks" "NM=nm" "RANLIB=ranlib" "LIBCFLAGS=-g -O2" "LIBCXXFLAGS=-O2 -g -fvtable-thunks -fno-implicit-templates" "LOADLIBES=" "LDFLAGS=" "MAKEINFO=/egcs/build/texinfo/makeinfo/makeinfo " "SHLIB=" "SHCURSES=" "PICFLAG=" "RUNTESTFLAGS=" subdir_do
gmake[2]: Entering directory `/egcs/build/libraries/libio'
cd tests; make check ...
gmake[3]: Entering directory `/egcs/build/libraries/libio/tests'
gmake[3]: Nothing to be done for `check'.
gmake[3]: Leaving directory `/egcs/build/libraries/libio/tests'
cd dbz; make check ...
gmake[3]: Entering directory `/egcs/build/libraries/libio/dbz'
/egcs/build/gcc/xgcc -B/egcs/build/gcc/ -g -O2 -I/egcs/src/egcs-1.0.1/libio/dbz -I.. -I/egcs/src/egcs-1.0.1/libio/dbz/.. -DDBZ_FINISH='_IO_flush_all()' -c /egcs/src/egcs-1.0.1/libio/dbz/byteflip.c
/egcs/build/gcc/xgcc -B/egcs/build/gcc/  byteflip.o  ../libio.a ../../libiberty/libiberty.a  -o byteflip
/egcs/build/gcc/xgcc -B/egcs/build/gcc/ -g -O2 -I/egcs/src/egcs-1.0.1/libio/dbz -I.. -I/egcs/src/egcs-1.0.1/libio/dbz/.. -DDBZ_FINISH='_IO_flush_all()' -DHAVERFCIZE -c rdbzmain.c
/egcs/build/gcc/xgcc -B/egcs/build/gcc/ -g -O2 -I/egcs/src/egcs-1.0.1/libio/dbz -I.. -I/egcs/src/egcs-1.0.1/libio/dbz/.. -DDBZ_FINISH='_IO_flush_all()' -DDBZDEBUG -DDEFSIZE=4019 -c rdbz.c
/egcs/build/gcc/xgcc -B/egcs/build/gcc/  rdbzmain.o rdbz.o case.o  ../libio.a ../../libiberty/libiberty.a  -o rdbz
/egcs/build/gcc/xgcc -B/egcs/build/gcc/ -g -O2 -I/egcs/src/egcs-1.0.1/libio/dbz -I.. -I/egcs/src/egcs-1.0.1/libio/dbz/.. -DDBZ_FINISH='_IO_flush_all()' -c /egcs/src/egcs-1.0.1/libio/dbz/fake.c
/egcs/build/gcc/xgcc -B/egcs/build/gcc/ -g -O2 -I/egcs/src/egcs-1.0.1/libio/dbz -I.. -I/egcs/src/egcs-1.0.1/libio/dbz/.. -DDBZ_FINISH='_IO_flush_all()' -c /egcs/src/egcs-1.0.1/libio/dbz/random.c
/egcs/build/gcc/xgcc -B/egcs/build/gcc/  fake.o random.o  ../libio.a ../../libiberty/libiberty.a  -o fake
./fake -t -e 75 3300 >hist3.3
./fake -t -e 75 10000 >hist10
: 'WARNING:  creates about 2MB of debris; do "make rclean" afterward'
rm -f dbase dbase[23] dbase.* dbase[23].*
test ! -d xx || rmdir xx
: crude check of synthetic history file
( sed 25q hist3.3 ; tail -25 hist3.3 ) >histjunk
cmp histjunk /egcs/src/egcs-1.0.1/libio/dbz/firstlast25
rm histjunk
: basic tests, exercising as many options as possible
cp hist3.3 dbase
mkdir xx
chmod -w xx
./rdbz -E 1000 -0 -M -i -S -u -U -C xx dbase
1000
2000
3000
rmdir xx
sed '/>	0/d' hist3.3 >dbase.used
test "`cat dbase.used | wc -l`" -eq "`sed -n '2s/ .*//p' dbase.dir`" ;
cp hist3.3 dbase2
./rdbz -E 1000 -0 -p 2679 -t '	' dbase2
1000
2000
3000
cmp hist3.3 dbase
cmp dbase dbase2
cmp dbase.dir dbase2.dir
cmp dbase.pag dbase2.pag
./rdbz -E 1000 -0 -c dbase
1000
2000
3000
./rdbz -E 1000 -0 -c -i -q -M -U dbase
1000
2000
3000
: build a database and then add to it
sed 1000q hist3.3 >dbase2
sed 1,1000d hist3.3 >dbase2.add
./rdbz -E 1000 -0 dbase2
1000
./rdbz -E 1000 -0 -a dbase2 dbase2.add
1000
2000
cmp dbase dbase2
cmp dbase.dir dbase2.dir
cmp dbase.pag dbase2.pag
: build based on existing one, test extraction and readonly files
./rdbz -E 1000 -0 -f dbase dbase2
1000
2000
3000
test "`cat dbase.used | wc -l`" -eq "`awk 'NR==2{print $1}' dbase2.dir`" ;
test "`cat dbase.used | wc -l`" -eq "`awk 'NR==2{print $2}' dbase2.dir`" ;
chmod -w dbase2.dir dbase2.pag
./rdbz -E 1000 -x dbase2 dbase >dbase.temp
1000
2000
3000
cmp dbase.used dbase.temp
: try some small case perversions
sed 's/\(@[^ 	]*\)A/\1a/' dbase >dbase.ick
./rdbz -E 1000 -x dbase2 dbase.ick >dbase.temp
1000
2000
3000
cmp dbase.used dbase.temp
sed -n 's/A\([^ 	]*@\)/a\1/p' dbase >dbase.ick
./rdbz -x dbase2 dbase.ick >dbase.temp
test ! -s dbase.temp ;
rm -f dbase2.dir dbase2.pag
: try it without tags, case-insensitive, with case perversions
./rdbz -E 1000 -0 -p '0 b 1' dbase2
1000
2000
3000
tr '[A-M][n-z]' '[a-m][N-Z]' <dbase2 >dbase.ick
./rdbz -E 1000 -x dbase2 dbase.ick >dbase.temp
1000
2000
3000
cmp dbase.used dbase.temp
rm -f dbase.temp dbase.ick
: test various perversions of byte ordering
awk -f /egcs/src/egcs-1.0.1/libio/dbz/revbytes dbase.dir >dbase2.dir
./byteflip `/egcs/src/egcs-1.0.1/libio/dbz/getmap dbase.dir` `/egcs/src/egcs-1.0.1/libio/dbz/getmap dbase2.dir` <dbase.pag >dbase2.pag
cp dbase dbase2
./rdbz -E 1000 -0 -c dbase2
1000
2000
3000
awk -f /egcs/src/egcs-1.0.1/libio/dbz/altbytes dbase.dir >dbase2.dir
dd conv=swab <dbase.pag >dbase2.pag
31+1 records in
31+1 records out
./rdbz -E 1000 -0 -c dbase2
1000
2000
3000
cp dbase2 dbase3
./rdbz -E 1000 -0 -f dbase2 dbase3
1000
2000
3000
./rdbz -E 1000 -0 -c dbase3
1000
2000
3000
test " `/egcs/src/egcs-1.0.1/libio/dbz/getmap dbase2.dir`" = " `/egcs/src/egcs-1.0.1/libio/dbz/getmap dbase3.dir`" ;
: test massive overflow, throw in case sensitivity and tag mask
cp hist10 dbase
./rdbz -E 1000 -0 -p '0 0 7ffc0000' dbase
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
./rdbz -E 1000 -0 -cq dbase
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
sed 100q dbase | egrep '[aA].*	' | tr aA Aa >dbase.ick
./rdbz -x dbase dbase.ick >dbase.temp
test ! -s dbase.temp ;
: success!
gmake rclean
gmake[4]: Entering directory `/egcs/build/libraries/libio/dbz'
rm -f dbase dbase[23] dbase.* dbase[23].* fake fake.o random.o
rm -f rdbz rdbz.o rdbzmain.o hist3.3 hist10 byteflip byteflip.o
rm -f histjunk core stamp-r? *~
test ! -d xx || rmdir xx
gmake[4]: Leaving directory `/egcs/build/libraries/libio/dbz'
gmake[3]: Leaving directory `/egcs/build/libraries/libio/dbz'
cd stdio; make check ...
gmake[3]: Entering directory `/egcs/build/libraries/libio/stdio'
gmake[3]: Nothing to be done for `check'.
gmake[3]: Leaving directory `/egcs/build/libraries/libio/stdio'
cd testsuite; make check ...
gmake[3]: Entering directory `/egcs/build/libraries/libio/testsuite'
rootme=`pwd`; export rootme; \
srcdir=/egcs/src/egcs-1.0.1/libio/testsuite ; export srcdir ; \
EXPECT=`if [ -f ${rootme}/../../expect/expect ] ; then echo ${rootme}/../../expect/expect ; else echo expect ; fi` ; export EXPECT ; \
if [ -f ${rootme}/../../expect/expect ] ; then  \
  TCL_LIBRARY=${srcdir}/../../tcl/library ; \
  export TCL_LIBRARY ; fi ; \
` if [ -f ${srcdir}/../../dejagnu/runtest ]; then echo ${srcdir}/../../dejagnu/runtest; else if [ "i686-pc-linux-gnu" = "i686-pc-linux-gnu" ]; then echo runtest; else t=''; echo runtest | sed -e '' $t; fi; fi`  
WARNING: Couldn't find the global config file.
Test Run By emil on Tue Mar  3 18:50:27 1998
Native configuration is i686-pc-linux-gnu

		=== libio tests ===

Running target unix
Using /usr/local/bin/../share/dejagnu/baseboards/unix.exp as board description file for target.
Using /usr/local/bin/../share/dejagnu/config/unix.exp as generic interface file for target.
Using /egcs/src/egcs-1.0.1/libio/testsuite/config/default.exp as tool-and-target-specific interface file.
Running /egcs/src/egcs-1.0.1/libio/testsuite/libio.tests/hounddog.exp ...
Running /egcs/src/egcs-1.0.1/libio/testsuite/libio.tests/putbackdog.exp ...
Running /egcs/src/egcs-1.0.1/libio/testsuite/libio.tests/tFile.exp ...
Running /egcs/src/egcs-1.0.1/libio/testsuite/libio.tests/tfformat.exp ...
Running /egcs/src/egcs-1.0.1/libio/testsuite/libio.tests/tiformat.exp ...
Running /egcs/src/egcs-1.0.1/libio/testsuite/libio.tests/tiomanip.exp ...
Running /egcs/src/egcs-1.0.1/libio/testsuite/libio.tests/tiomisc.exp ...
Running /egcs/src/egcs-1.0.1/libio/testsuite/libio.tests/tstdiomisc.exp ...

		=== libio Summary ===

# of expected passes		40
gmake[3]: Leaving directory `/egcs/build/libraries/libio/testsuite'
gmake[2]: Leaving directory `/egcs/build/libraries/libio'
gmake[1]: Leaving directory `/egcs/build/libraries/libio'
gmake[1]: Entering directory `/egcs/build/libraries/libstdc++'
cd ../libio ; gmake "INSTALL=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c" "INSTALL_DATA=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c -m 644" "INSTALL_PROGRAM=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c " "prefix=/usr/local" "exec_prefix=/usr/local" "tooldir=/usr/local/i686-pc-linux-gnu" "AR=ar" "AR_FLAGS=rc" "CC=/egcs/build/gcc/xgcc -B/egcs/build/gcc/" "CXX=/egcs/build/gcc/xgcc -B/egcs/build/gcc/" "CFLAGS=-g -O2" "CXXFLAGS=-O2 -g -fvtable-thunks" "NM=nm" "RANLIB=ranlib" "LIBCFLAGS=-g -O2" "LIBCXXFLAGS=-O2 -g -fvtable-thunks -fno-implicit-templates" "LOADLIBES=" "LDFLAGS=" "MAKEINFO=/egcs/build/texinfo/makeinfo/makeinfo " "SHLIB=libstdc++.so.2.8.0" "SHCURSES=" "PICFLAG=" "RUNTESTFLAGS=" iostream.list
gmake[2]: Entering directory `/egcs/build/libraries/libio'
gmake[2]: `iostream.list' is up to date.
gmake[2]: Leaving directory `/egcs/build/libraries/libio'
rootme=`pwd`/; export rootme; \
SAVE_LLPATH="${SAVE_LLPATH-$LD_LIBRARY_PATH}"; export SAVE_LLPATH; \
LD_LIBRARY_PATH="${rootme}../libstdc++:${rootme}../libg++:$SAVE_LLPATH"; \
export LD_LIBRARY_PATH; \
gmake "DODIRS=tests testsuite" DO=check "INSTALL=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c" "INSTALL_DATA=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c -m 644" "INSTALL_PROGRAM=/bin/sh /egcs/src/egcs-1.0.1/install-sh -c " "prefix=/usr/local" "exec_prefix=/usr/local" "tooldir=/usr/local/i686-pc-linux-gnu" "AR=ar" "AR_FLAGS=rc" "CC=/egcs/build/gcc/xgcc -B/egcs/build/gcc/" "CXX=/egcs/build/gcc/xgcc -B/egcs/build/gcc/" "CFLAGS=-g -O2" "CXXFLAGS=-O2 -g -fvtable-thunks" "NM=nm" "RANLIB=ranlib" "LIBCFLAGS=-g -O2" "LIBCXXFLAGS=-O2 -g -fvtable-thunks -fno-implicit-templates" "LOADLIBES=" "LDFLAGS=" "MAKEINFO=/egcs/build/texinfo/makeinfo/makeinfo " "SHLIB=libstdc++.so.2.8.0" "SHCURSES=" "PICFLAG=" "RUNTESTFLAGS=" subdir_do
gmake[2]: Entering directory `/egcs/build/libraries/libstdc++'
cd tests; make check ...
gmake[3]: Entering directory `/egcs/build/libraries/libstdc++/tests'
gmake[3]: Nothing to be done for `check'.
gmake[3]: Leaving directory `/egcs/build/libraries/libstdc++/tests'
cd testsuite; make check ...
gmake[3]: Entering directory `/egcs/build/libraries/libstdc++/testsuite'
rootme=`pwd`; export rootme; \
srcdir=/egcs/src/egcs-1.0.1/libstdc++/testsuite ; export srcdir ; \
EXPECT=`if [ -f ${rootme}/../../expect/expect ] ; then echo ${rootme}/../../expect/expect ; else echo expect ; fi` ; export EXPECT ; \
if [ -f ${rootme}/../../expect/expect ] ; then  \
  TCL_LIBRARY=${srcdir}/../../tcl/library ; \
  export TCL_LIBRARY ; fi ; \
`if [ -f ${srcdir}/../../dejagnu/runtest ] ; then echo ${srcdir}/../../dejagnu/runtest ; else echo runtest; fi`  
WARNING: Couldn't find the global config file.
Test Run By emil on Tue Mar  3 18:50:54 1998
Native configuration is i686-pc-linux-gnu

		=== libstdc++ tests ===

Running target unix
Using /usr/local/bin/../share/dejagnu/baseboards/unix.exp as board description file for target.
Using /usr/local/bin/../share/dejagnu/config/unix.exp as generic interface file for target.
Using /egcs/src/egcs-1.0.1/libstdc++/testsuite/config/default.exp as tool-and-target-specific interface file.
Running /egcs/src/egcs-1.0.1/libstdc++/testsuite/libstdc++.tests/test.exp ...

		=== libstdc++ Summary ===

# of expected passes		30
gmake[3]: Leaving directory `/egcs/build/libraries/libstdc++/testsuite'
gmake[2]: Leaving directory `/egcs/build/libraries/libstdc++'
gmake[1]: Leaving directory `/egcs/build/libraries/libstdc++'
gmake[1]: Entering directory `/egcs/build/libraries/libiberty'
gmake[1]: Nothing to be done for `check'.
gmake[1]: Leaving directory `/egcs/build/libraries/libiberty'
gmake[1]: Entering directory `/egcs/build/gcc'
rootme=`pwd`; export rootme; \
srcdir=`cd /egcs/src/egcs-1.0.1/gcc; pwd` ; export srcdir ; \
cd testsuite; \
EXPECT=expect ; export EXPECT ; \
if [ -f ${rootme}/../expect/expect ] ; then  \
   TCL_LIBRARY=${srcdir}/../tcl/library ; \
   export TCL_LIBRARY ; fi ; \
runtest --tool gcc 
WARNING: Couldn't find the global config file.
Test Run By emil on Tue Mar  3 18:51:28 1998
Native configuration is i686-pc-linux-gnu

		=== gcc tests ===

Running target unix
Using /usr/local/bin/../share/dejagnu/baseboards/unix.exp as board description file for target.
Using /usr/local/bin/../share/dejagnu/config/unix.exp as generic interface file for target.
Using /egcs/src/egcs-1.0.1/gcc/testsuite/config/default.exp as tool-and-target-specific interface file.
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.c-torture/code_quality/code_quality.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.c-torture/compile/compile.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.c-torture/execute/execute.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.c-torture/execute/ieee/ieee.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.c-torture/noncompile/noncompile.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.c-torture/special/special.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.c-torture/unsorted/unsorted.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.dg/dg.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.failure/failure.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.misc-tests/acker1.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.misc-tests/dg-test.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.misc-tests/dhry.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.misc-tests/gcov.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.misc-tests/matrix1.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.misc-tests/mg.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.misc-tests/msgs.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.misc-tests/optbench.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.misc-tests/sieve.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/gcc.misc-tests/sort2.exp ...

		=== gcc Summary ===

# of expected passes		4883
# of expected failures		5
# of unsupported tests		7
/egcs/build/gcc/xgcc version egcs-2.90.23 980102 (egcs-1.0.1 release)

rootme=`pwd`; export rootme; \
srcdir=`cd /egcs/src/egcs-1.0.1/gcc; pwd` ; export srcdir ; \
cd testsuite; \
EXPECT=expect ; export EXPECT ; \
if [ -f ${rootme}/../expect/expect ] ; then  \
   TCL_LIBRARY=${srcdir}/../tcl/library ; \
    export TCL_LIBRARY ; fi ; \
runtest --tool g++ 
WARNING: Couldn't find the global config file.
Test Run By emil on Tue Mar  3 19:01:03 1998
Native configuration is i686-pc-linux-gnu

		=== g++ tests ===

Running target unix
Using /usr/local/bin/../share/dejagnu/baseboards/unix.exp as board description file for target.
Using /usr/local/bin/../share/dejagnu/config/unix.exp as generic interface file for target.
Using /egcs/src/egcs-1.0.1/gcc/testsuite/config/default.exp as tool-and-target-specific interface file.
Running /egcs/src/egcs-1.0.1/gcc/testsuite/g++.old-deja/old-deja.exp ...
FAIL: g++.eh/spec2.C  Execution test
FAIL: g++.eh/spec4.C  Execution test
XPASS: g++.jason/destruct3.C - (test for bogus messages, line 38)
FAIL: g++.mike/eh33.C  Execution test
FAIL: g++.mike/eh44.C  Execution test
FAIL: g++.mike/eh5.C  Execution test
FAIL: g++.mike/eh50.C  Execution test
FAIL: g++.mike/eh51.C  Execution test
FAIL: g++.mike/p6610a.C  Execution test

		=== g++ Summary ===

# of expected passes		3392
# of unexpected failures	8
# of unexpected successes	1
# of expected failures		82
# of untested testcases		6
/egcs/build/gcc/testsuite/../xgcc version egcs-2.90.23 980102 (egcs-1.0.1 release)

gmake[1]: [check-g++] Error 1 (ignored)
rootme=`pwd`; export rootme; \
srcdir=`cd /egcs/src/egcs-1.0.1/gcc; pwd` ; export srcdir ; \
cd testsuite; \
EXPECT=expect ; export EXPECT ; \
if [ -f ${rootme}/../expect/expect ] ; then  \
   TCL_LIBRARY=${srcdir}/../tcl/library ; \
   export TCL_LIBRARY ; fi ; \
runtest --tool g77 
WARNING: Couldn't find the global config file.
Test Run By emil on Tue Mar  3 19:08:46 1998
Native configuration is i686-pc-linux-gnu

		=== g77 tests ===

Running target unix
Using /usr/local/bin/../share/dejagnu/baseboards/unix.exp as board description file for target.
Using /usr/local/bin/../share/dejagnu/config/unix.exp as generic interface file for target.
Using /egcs/src/egcs-1.0.1/gcc/testsuite/config/default.exp as tool-and-target-specific interface file.
Running /egcs/src/egcs-1.0.1/gcc/testsuite/g77.f-torture/compile/compile.exp ...
Running /egcs/src/egcs-1.0.1/gcc/testsuite/g77.f-torture/execute/execute.exp ...
FAIL: g77.f-torture/execute/dnrm2.f execution,  -O2 -fomit-frame-pointer -finline-functions -funroll-loops 
FAIL: g77.f-torture/execute/dnrm2.f execution,  -O2 -fomit-frame-pointer -finline-functions -funroll-all-loops 

		=== g77 Summary ===

# of expected passes		130
# of unexpected failures	2
/egcs/build/gcc/g77 version egcs-2.90.23 980102 (egcs-1.0.1 release)

gmake[1]: [check-g77] Error 1 (ignored)
gmake[1]: Leaving directory `/egcs/build/gcc'
Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]