This is the mail archive of the gcc-patches@gcc.gnu.org mailing list for the GCC project.
| Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
|---|---|---|
| Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
| Other format: | [Raw text] | |
[PATCH, GCC/ARM, 9/10] Call nscall function with blxns
Hi,
=== Context ===
This patch is part of a patch series to add support for Armv8.1-M
Mainline Security Extensions architecture. Its purpose is to call
functions with the cmse_nonsecure_call attribute directly using blxns
with no undue restriction on the register used for that.
=== Patch description ===
This change to use BLXNS to call a nonsecure function from secure
directly (not using a libcall) is made in 2 steps:
- change nonsecure_call patterns to use blxns instead of calling
__gnu_cmse_nonsecure_call
- loosen requirement for function address to allow any register when
doing BLXNS.
The former is a straightforward check over whether instructions added in
Armv8.1-M Mainline are available while the latter consist in making the
nonsecure call pattern accept any register by using match_operand and
changing the nonsecure_call_internal expander to no force r4 when
targeting Armv8.1-M Mainline.
The tricky bit is actually in the test update, specifically how to check
that register lists for CLRM have all registers except for the one
holding parameters (already done) and the one holding the address used
by BLXNS. This is achieved with 3 scan-assembler directives.
1) The first one lists all registers that can appear in CLRM but make
each of them optional.
Property guaranteed: no wrong register is cleared and none appears
twice in the register list.
2) The second directive check that the CLRM is made of a fixed number
of the right registers to be cleared. The number used is the number
of registers that could contain a secret minus one (used to hold the
address of the function to call.
Property guaranteed: register list has the right number of registers
Cumulated property guaranteed: only registers with a potential secret
are cleared and they are all listed but ont
3) The last directive checks that we cannot find a CLRM with a register
in it that also appears in BLXNS. This is check via the use of a
back-reference on any of the allowed register in CLRM, the
back-reference enforcing that whatever register match in CLRM must be
the same in the BLXNS.
Property guaranteed: register used for BLXNS is different from
registers cleared in CLRM.
Some more care needs to happen for the gcc.target/arm/cmse/cmse-1.c
testcase due to there being two CLRM generated. To ensure the third
directive match the right CLRM to the BLXNS, a negative lookahead is
used between the CLRM register list and the BLXNS. The way negative
lookahead work is by matching the *position* where a given regular
expression does not match. In this case, since it comes after the CLRM
register list it is requesting that what comes after the register list
does not have a CLRM again followed by BLXNS. This guarantees that the
.*blxns after only matches a blxns without another CLRM before.
ChangeLog entries are as follows:
*** gcc/ChangeLog ***
2019-10-23 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2019-10-23 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/arm.md (nonsecure_call_internal): Do not force memory
address in r4 when targeting Armv8.1-M Mainline.
(nonsecure_call_value_internal): Likewise.
* config/arm/thumb2.md (nonsecure_call_reg_thumb2): Make memory address
a register match_operand again. Emit BLXNS when targeting
Armv8.1-M Mainline.
(nonsecure_call_value_reg_thumb2): Likewise.
*** gcc/testsuite/ChangeLog ***
2019-10-23 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2019-10-23 Thomas Preud'homme <thomas.preudhomme@arm.com>
* gcc.target/arm/cmse/cmse-1.c: Add check for BLXNS when instructions
introduced in Armv8.1-M Mainline Security Extensions are available and
restrict checks for libcall to __gnu_cmse_nonsecure_call to Armv8-M
targets only. Adapt CLRM check to verify register used for BLXNS is
not in the CLRM register list.
* gcc.target/arm/cmse/cmse-14.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-4.c: Likewise and adapt
check for LSB clearing bit to be using the same register as BLXNS when
targeting Armv8.1-M Mainline.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-5.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-6.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-9.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-and-union.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/union-1.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/union-2.c: Likewise.
* gcc.target/arm/cmse/cmse-15.c: Count BLXNS when targeting Armv8.1-M
Mainline and restrict libcall count to Armv8-M.
Testing: bootstrapped on arm-linux-gnueabihf and arm-none-eabi; testsuite shows no
regression.
Is this ok for trunk?
Best regards,
Mihail
############### Attachment also inlined for ease of reply ###############
diff --git a/gcc/config/arm/arm.md b/gcc/config/arm/arm.md
index d607f88cb05ffa9cd8a47b8c8e0c53ea3a5ca411..b7af3c060427d972e3cd1c7a8055aec20335c02b 100644
--- a/gcc/config/arm/arm.md
+++ b/gcc/config/arm/arm.md
@@ -7561,12 +7561,15 @@
"use_cmse"
"
{
- rtx tmp;
- tmp = copy_to_suggested_reg (XEXP (operands[0], 0),
+ if (!TARGET_HAVE_FPCTX_CMSE)
+ {
+ rtx tmp =
+ copy_to_suggested_reg (XEXP (operands[0], 0),
gen_rtx_REG (SImode, R4_REGNUM),
SImode);
- operands[0] = replace_equiv_address (operands[0], tmp);
+ operands[0] = replace_equiv_address (operands[0], tmp);
+ }
}")
(define_insn "*call_reg_armv5"
@@ -7669,12 +7672,15 @@
"use_cmse"
"
{
- rtx tmp;
- tmp = copy_to_suggested_reg (XEXP (operands[1], 0),
+ if (!TARGET_HAVE_FPCTX_CMSE)
+ {
+ rtx tmp =
+ copy_to_suggested_reg (XEXP (operands[1], 0),
gen_rtx_REG (SImode, R4_REGNUM),
SImode);
- operands[1] = replace_equiv_address (operands[1], tmp);
+ operands[1] = replace_equiv_address (operands[1], tmp);
+ }
}")
(define_insn "*call_value_reg_armv5"
diff --git a/gcc/config/arm/thumb2.md b/gcc/config/arm/thumb2.md
index 19d25cfe9b97b9428e3a6daebbf8dfb5648f29ef..964b3e2afcd524bb342373b400e35d0a72c4bd7f 100644
--- a/gcc/config/arm/thumb2.md
+++ b/gcc/config/arm/thumb2.md
@@ -560,13 +560,18 @@
)
(define_insn "*nonsecure_call_reg_thumb2"
- [(call (unspec:SI [(mem:SI (reg:SI R4_REGNUM))]
+ [(call (unspec:SI [(mem:SI (match_operand:SI 0 "s_register_operand" "r"))]
UNSPEC_NONSECURE_MEM)
- (match_operand 0 "" ""))
- (use (match_operand 1 "" ""))
+ (match_operand 1 "" ""))
+ (use (match_operand 2 "" ""))
(clobber (reg:SI LR_REGNUM))]
"TARGET_THUMB2 && use_cmse"
- "bl\\t__gnu_cmse_nonsecure_call"
+ {
+ if (TARGET_HAVE_FPCTX_CMSE)
+ return "blxns\\t%0";
+ else
+ return "bl\\t__gnu_cmse_nonsecure_call";
+ }
[(set_attr "length" "4")
(set_attr "type" "call")]
)
@@ -585,13 +590,18 @@
(define_insn "*nonsecure_call_value_reg_thumb2"
[(set (match_operand 0 "" "")
(call
- (unspec:SI [(mem:SI (reg:SI R4_REGNUM))]
+ (unspec:SI [(mem:SI (match_operand:SI 1 "register_operand" "l*r"))]
UNSPEC_NONSECURE_MEM)
- (match_operand 1 "" "")))
- (use (match_operand 2 "" ""))
+ (match_operand 2 "" "")))
+ (use (match_operand 3 "" ""))
(clobber (reg:SI LR_REGNUM))]
"TARGET_THUMB2 && use_cmse"
- "bl\t__gnu_cmse_nonsecure_call"
+ {
+ if (TARGET_HAVE_FPCTX_CMSE)
+ return "blxns\\t%1";
+ else
+ return "bl\\t__gnu_cmse_nonsecure_call";
+ }
[(set_attr "length" "4")
(set_attr "type" "call")]
)
diff --git a/gcc/testsuite/gcc.target/arm/cmse/cmse-1.c b/gcc/testsuite/gcc.target/arm/cmse/cmse-1.c
index 9f36fa3b1d8b86b4e1827909fca4fee181ba1c61..ddfcfacab5f601a729319a9d2dab03e61ee56bca 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/cmse-1.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/cmse-1.c
@@ -110,7 +110,13 @@ qux (int_nsfunc_t * callback)
/* { dg-final { scan-assembler "vldr\tFPCXTNS, \\\[sp\\\], #4" { target arm_cmse_clear_ok } } } */
/* { dg-final { scan-assembler "msr\tAPSR_nzcvq" { target { ! arm_cmse_clear_ok } } } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" { target arm_cmse_clear_ok } } } */
-/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" { target arm_cmse_clear_ok } } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r0, )?(r1, )?(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" { target arm_cmse_clear_ok } } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[0-9\]|r10|fp|ip), ){12}APSR\}" { target arm_cmse_clear_ok } } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[0-9\]|r10|fp|ip),\[^\}\]\+\}(?!.*clrm.*blxns).*blxns\t\\1" { target arm_cmse_clear_ok } } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" { target arm_cmse_clear_ok } } } */
int call_callback (void)
@@ -120,4 +126,5 @@ int call_callback (void)
else
return default_callback ();
}
-/* { dg-final { scan-assembler-times "bl\\s+__gnu_cmse_nonsecure_call" 1 } } */
+/* { dg-final { scan-assembler-times "bl\\s+__gnu_cmse_nonsecure_call" 1 { target { ! arm_cmse_clear_ok } } } } */
+/* { dg-final { scan-assembler "blxns" { target arm_cmse_clear_ok } } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/cmse-14.c b/gcc/testsuite/gcc.target/arm/cmse/cmse-14.c
index 6d39afab44329e78a8ff2f693fd94fe6a501af5a..5ab97856066e14c0005b56210e62f2b7a59fd911 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/cmse-14.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/cmse-14.c
@@ -10,7 +10,15 @@ int foo (void)
}
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" { target arm_cmse_clear_ok } } } */
-/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" { target arm_cmse_clear_ok } } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r0, )?(r1, )?(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" { target arm_cmse_clear_ok } } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[0-9\]|r10|fp|ip), ){12}APSR\}" { target arm_cmse_clear_ok } } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[0-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" { target arm_cmse_clear_ok } } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" { target arm_cmse_clear_ok } } } */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
-/* { dg-final { scan-assembler-not "^(.*\\s)?bl?\[^\\s]*\\s+bar" } } */
+/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" { target { ! arm_cmse_clear_ok } } } } */
+/* { dg-final { scan-assembler-not "^(.*\\s)?bl?\[^\\s]*\\s+bar" { target { ! arm_cmse_clear_ok } } } } */
+/* { dg-final { scan-assembler "blxns" { target arm_cmse_clear_ok } } } */
+/* { dg-final { scan-assembler-not "^(.*\\s)?bl?(?!xns)\[^\\s]*\\s+bar" { target arm_cmse_clear_ok } } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/cmse-15.c b/gcc/testsuite/gcc.target/arm/cmse/cmse-15.c
index 4e9ace1f3f33b8a8653797e29ca62eb3dd7ae918..0e37b50e004d74dc81f5a8bdc0c9ba21ceaca67d 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/cmse-15.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/cmse-15.c
@@ -69,4 +69,9 @@ int secure5 (void)
{
return (*s_bar2) ();
}
-/* { dg-final { scan-assembler-times "bl\\s+__gnu_cmse_nonsecure_call" 6 } } */
+
+/* ARMv8-M expectation. */
+/* { dg-final { scan-assembler-times "bl\\s+__gnu_cmse_nonsecure_call" 6 { target { ! arm_cmse_clear_ok } } } } */
+
+/* ARMv8.1-M expectation. */
+/* { dg-final { scan-assembler-times "blxns" 6 { target arm_cmse_clear_ok } } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-4.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-4.c
index d4caf513ed2153370369bddbfcf6d2568d9f2f1e..ff34edb21c36c9f114aa934fa86ea962d932f273 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-4.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-4.c
@@ -10,9 +10,16 @@
/* { dg-final { scan-assembler "and\tr1, r1, ip" } } */
/* { dg-final { scan-assembler "mov\tip, #3" } } */
/* { dg-final { scan-assembler "and\tr2, r2, ip" } } */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[3-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[3-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[3-9\]|r10|fp|ip), ){9}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[3-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-5.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-5.c
index 2b7655a2c9971fb0aad4e6c8a1fee72e21028fad..4d1407aba4418006463fdca59cbe90e768e78391 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-5.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-5.c
@@ -8,9 +8,16 @@
/* { dg-final { scan-assembler "and\tr0, r0, ip" } } */
/* { dg-final { scan-assembler "movw\tip, #2047" } } */
/* { dg-final { scan-assembler "and\tr1, r1, ip" } } */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[2-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[2-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[2-9\]|r10|fp|ip), ){10}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[2-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-6.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-6.c
index 1a62076df9d6831d06f5ac6bdcb7deed0ecd23f8..9b1227adfdc03457266573447c7996245a114110 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-6.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-6.c
@@ -11,9 +11,16 @@
/* { dg-final { scan-assembler "and\tr1, r1, ip" } } */
/* { dg-final { scan-assembler "mov\tip, #255" } } */
/* { dg-final { scan-assembler "and\tr2, r2, ip" } } */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[3-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[3-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[3-9\]|r10|fp|ip), ){9}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[3-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-7.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-7.c
index 1319ac9766bcd330f6d8f0f7754a64a1dcc105b1..aec958fc9b9d125c54022911ee34affa9dd81797 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-7.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-7.c
@@ -8,9 +8,16 @@
/* { dg-final { scan-assembler "and\tr0, r0, ip" } } */
/* { dg-final { scan-assembler "movw\tip, #2047" } } */
/* { dg-final { scan-assembler "and\tr1, r1, ip" } } */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[2-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[2-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[2-9\]|r10|fp|ip), ){10}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[2-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-8.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-8.c
index 9bb60175529d77a3b1868f62a5a4d5355f00b76b..ae039e292d55423b1dc1b19551278418224bbe5e 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-8.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-8.c
@@ -11,9 +11,16 @@
/* { dg-final { scan-assembler "movw\tip, #65535" } } */
/* { dg-final { scan-assembler "movt\tip, 31" } } */
/* { dg-final { scan-assembler "and\tr2, r2, ip" } } */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[3-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[3-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[3-9\]|r10|fp|ip), ){9}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[3-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-9.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-9.c
index 11ca78bfdaf1ebe09f9699c278dc3db4fd20768c..f455f8cf19b1d8f32bd6ca208d33c144da644c29 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-9.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-9.c
@@ -5,9 +5,16 @@
/* { dg-final { scan-assembler "movw\tip, #1799" } } */
/* { dg-final { scan-assembler "and\tr0, r0, ip" } } */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[1-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[1-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r1, )?(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[1-9\]|r10|fp|ip), ){11}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[1-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-and-union.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-and-union.c
index 2f14c52715e0ad6e6ab69b01713ee13985a22653..3e76364c40452a7946e3b97e2321fd6e6d204355 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-and-union.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/bitfield-and-union.c
@@ -15,9 +15,16 @@
/* { dg-final { scan-assembler "movw\tip, #65535" } } */
/* { dg-final { scan-assembler "movt\tip, 31" } } */
/* { dg-final { scan-assembler "and\tr3, r3, ip" } } */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[4-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[4-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[4-9\]|r10|fp|ip), ){8}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[4-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-13.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-13.c
index e759db24fac27be2de664ad4faced7bb5d3be84a..0c49277389271321c7fd7faa6ae6aaee2c299def 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-13.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-13.c
@@ -6,11 +6,18 @@
#include "../../../cmse-13.x"
/* Checks for saving and clearing prior to function call. */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler "vpush.64\t\{d8, d9, d10, d11, d12, d13, d14, d15\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r0, )?(r1, )?(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[0-9\]|r10|fp|ip), ){12}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[0-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler-not "vmov\.f32\ts0, #1\.0" } } */
/* { dg-final { scan-assembler-not "vmov\.f32\ts2, #1\.0" } } */
/* { dg-final { scan-assembler-not "vmov\.f32\ts3, #1\.0" } } */
@@ -20,4 +27,4 @@
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* Now we check that we use the correct intrinsic to call. */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-7.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-7.c
index 9df7b5de3ad64e719fc97d7a67a4893398e87b32..3c66b0a8c6f1c7be6c8cf77b2c71916a08c7b357 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-7.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-7.c
@@ -6,14 +6,21 @@
#include "../../../cmse-7.x"
/* Checks for saving and clearing prior to function call. */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler "vpush.64\t\{d8, d9, d10, d11, d12, d13, d14, d15\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r0, )?(r1, )?(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[0-9\]|r10|fp|ip), ){12}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[0-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "vscclrm\t\{s0-s31, VPR\}" } } */
/* { dg-final { scan-assembler "vldm\tsp!, \{d8-d15\}" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* Now we check that we use the correct intrinsic to call. */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-8.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-8.c
index b36ff73cb9b46d4d3a91f854c022787dc000d9c3..7d456c39705b15fa5b55270ac6b4ed57f5c7e465 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-8.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-8.c
@@ -6,11 +6,18 @@
#include "../../../cmse-8.x"
/* Checks for saving and clearing prior to function call. */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler "vpush.64\t\{d8, d9, d10, d11, d12, d13, d14, d15\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r0, )?(r1, )?(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[0-9\]|r10|fp|ip), ){12}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[0-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler-not "vmov\.f32\ts0, #1\.0" } } */
/* { dg-final { scan-assembler-not "vmov\.f32\ts1, #1\.0" } } */
/* { dg-final { scan-assembler "vscclrm\t\{s2-s31, VPR\}" } } */
@@ -18,4 +25,4 @@
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* Now we check that we use the correct intrinsic to call. */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard/cmse-13.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard/cmse-13.c
index 72493f032355828bdf48b84dc98d8102becd1b36..ab95c83a1167aff9fd4c0e24fe5580895cfbf0bb 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard/cmse-13.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard/cmse-13.c
@@ -6,11 +6,18 @@
#include "../../../cmse-13.x"
/* Checks for saving and clearing prior to function call. */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler "vpush.64\t\{d8, d9, d10, d11, d12, d13, d14, d15\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r0, )?(r1, )?(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[0-9\]|r10|fp|ip), ){12}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[0-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler-not "vmov\.f32\ts0, #1\.0" } } */
/* { dg-final { scan-assembler-not "vmov\.f64\td0, #1\.0" } } */
/* { dg-final { scan-assembler-not "vmov\.f64\td1, #1\.0" } } */
@@ -22,4 +29,4 @@
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* Now we check that we use the correct intrinsic to call. */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard/cmse-7.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard/cmse-7.c
index 112ed78d6f172be31d4a4f06840d32a90cdf3dd4..cf58d547972e21e0816a1bdf74968d0b50d2bd08 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard/cmse-7.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard/cmse-7.c
@@ -6,14 +6,21 @@
#include "../../../cmse-7.x"
/* Checks for saving and clearing prior to function call. */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler "vpush.64\t\{d8, d9, d10, d11, d12, d13, d14, d15\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r0, )?(r1, )?(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[0-9\]|r10|fp|ip), ){12}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[0-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "vscclrm\t\{s0-s31, VPR\}" } } */
/* { dg-final { scan-assembler "vldm\tsp!, \{d8-d15\}" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* Now we check that we use the correct intrinsic to call. */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard/cmse-8.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard/cmse-8.c
index f48e8a0a020cebed8c9fa124d352f047442979d6..1854d03d0814c90f8014a28fb1c81c6866f0071d 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard/cmse-8.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/hard/cmse-8.c
@@ -6,15 +6,22 @@
#include "../../../cmse-8.x"
/* Checks for saving and clearing prior to function call. */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler "vpush.64\t\{d8, d9, d10, d11, d12, d13, d14, d15\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r0, )?(r1, )?(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[0-9\]|r10|fp|ip), ){12}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[0-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler-not "vmov\.f64\td0, #1\.0" } } */
/* { dg-final { scan-assembler "vscclrm\t\{s2-s31, VPR\}" } } */
/* { dg-final { scan-assembler "vldm\tsp!, \{d8-d15\}" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* Now we check that we use the correct intrinsic to call. */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/soft/cmse-13.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/soft/cmse-13.c
index 52d22427de79c6a76fbe32b8df7f76b4b286249c..1b207c394081e6ec9bf569961a4a059d5b47fe20 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/soft/cmse-13.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/soft/cmse-13.c
@@ -5,18 +5,25 @@
#include "../../../cmse-13.x"
/* Checks for saving and clearing prior to function call. */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[1,4-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[1,4-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler-not "mov\tr0, r4" } } */
/* { dg-final { scan-assembler-not "mov\tr2, r4" } } */
/* { dg-final { scan-assembler-not "mov\tr3, r4" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler "vlstm\tsp" } } */
-/* { dg-final { scan-assembler "clrm\t\{r1, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r1, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[1,4-9\]|r10|fp|ip), ){9}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[1,4-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "vlldm\tsp" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler-not "vmov" } } */
/* { dg-final { scan-assembler-not "vmsr" } } */
/* Now we check that we use the correct intrinsic to call. */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/soft/cmse-7.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/soft/cmse-7.c
index 40026d5ee1cc62b4acf48be9619ccd69ef4ead7b..3ec639480868944ed29065936c1fab10aa9e0fed 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/soft/cmse-7.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/soft/cmse-7.c
@@ -5,15 +5,22 @@
#include "../../../cmse-7.x"
/* Checks for saving and clearing prior to function call. */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler "vlstm\tsp" } } */
-/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r0, )?(r1, )?(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[0-9\]|r10|fp|ip), ){12}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[0-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "vlldm\tsp" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler-not "vmov" } } */
/* { dg-final { scan-assembler-not "vmsr" } } */
/* Now we check that we use the correct intrinsic to call. */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/soft/cmse-8.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/soft/cmse-8.c
index 6edc1f6ed7e6bc27024056375db4a2d30c3ea3c4..5c1d245d4aa966812e52f327c7ceba5dabba2e18 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/soft/cmse-8.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/soft/cmse-8.c
@@ -5,17 +5,24 @@
#include "../../../cmse-8.x"
/* Checks for saving and clearing prior to function call. */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[2-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[2-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler-not "mov\tr0, r4" } } */
/* { dg-final { scan-assembler-not "mov\tr1, r4" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler "vlstm\tsp" } } */
-/* { dg-final { scan-assembler "clrm\t\{r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[2-9\]|r10|fp|ip), ){10}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[2-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "vlldm\tsp" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler-not "vmov" } } */
/* { dg-final { scan-assembler-not "vmsr" } } */
/* Now we check that we use the correct intrinsic to call. */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-7.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-7.c
index 8d05576add940c277e5a13f7aab99e6807c1553d..3228692c2686fcae8e1369f984aaa6c375ad6418 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-7.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-7.c
@@ -6,13 +6,20 @@
#include "../../../cmse-7.x"
/* Checks for saving and clearing prior to function call. */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler "vlstm\tsp" } } */
-/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r0, )?(r1, )?(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[0-9\]|r10|fp|ip), ){12}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[0-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "vlldm\tsp" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* Now we check that we use the correct intrinsic to call. */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-8.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-8.c
index 1f0a14742781b7340685338901dbfab9b700b779..1c60d97dabd99136533a61fef5ae099eae4bbc93 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-8.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-8.c
@@ -6,15 +6,22 @@
#include "../../../cmse-8.x"
/* Checks for saving and clearing prior to function call. */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[2-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[2-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler-not "mov\tr0, r4" } } */
/* { dg-final { scan-assembler-not "mov\tr1, r4" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler "vlstm\tsp" } } */
-/* { dg-final { scan-assembler "clrm\t\{r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[2-9\]|r10|fp|ip), ){10}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[2-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "vlldm\tsp" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* Now we check that we use the correct intrinsic to call. */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-13.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-13.c
index 842794181087ddbd5ce59680035a0cb61ce5682e..c366f6ae4ccc65d943dbbf045925ca9c6e8921ca 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-13.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-13.c
@@ -6,16 +6,23 @@
#include "../../../cmse-13.x"
/* Checks for saving and clearing prior to function call. */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[1,4-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[1,4-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler-not "mov\tr0, r4" } } */
/* { dg-final { scan-assembler-not "mov\tr2, r4" } } */
/* { dg-final { scan-assembler-not "mov\tr3, r4" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler "vlstm\tsp" } } */
-/* { dg-final { scan-assembler "clrm\t\{r1, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r1, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[1,4-9\]|r10|fp|ip), ){9}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[1,4-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "vlldm\tsp" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* Now we check that we use the correct intrinsic to call. */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-7.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-7.c
index 38c9d5457034d2427413bcce7e7be6bad80f7a67..186a4480f4e816bdb2413ecbc690470e1c2480e6 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-7.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-7.c
@@ -6,13 +6,20 @@
#include "../../../cmse-7.x"
/* Checks for saving and clearing prior to function call. */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[0-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler "vlstm\tsp" } } */
-/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r0, )?(r1, )?(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[0-9\]|r10|fp|ip), ){12}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[0-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "vlldm\tsp" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* Now we check that we use the correct intrinsic to call. */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-8.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-8.c
index 6a17bd322fcc4e7e00ea289ee7373db9d8c37a87..f0f74f06bbd1eed2f71b46bc8947c99ce1de0765 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-8.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-8.c
@@ -6,15 +6,22 @@
#include "../../../cmse-8.x"
/* Checks for saving and clearing prior to function call. */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[2-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[2-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler-not "mov\tr0, r4" } } */
/* { dg-final { scan-assembler-not "mov\tr1, r4" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* { dg-final { scan-assembler "vlstm\tsp" } } */
-/* { dg-final { scan-assembler "clrm\t\{r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[2-9\]|r10|fp|ip), ){10}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[2-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "vlldm\tsp" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
/* Now we check that we use the correct intrinsic to call. */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/union-1.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/union-1.c
index 43e58ebde56ceb229edca2db25b720c42207c100..4d58eed1ac21e32dfa893397736be45129af53b8 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/union-1.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/union-1.c
@@ -8,9 +8,16 @@
/* { dg-final { scan-assembler "and\tr0, r0, ip" } } */
/* { dg-final { scan-assembler "movw\tip, #511" } } */
/* { dg-final { scan-assembler "and\tr1, r1, ip" } } */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[2-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[2-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r2, )?(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[2-9\]|r10|fp|ip), ){10}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[2-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
diff --git a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/union-2.c b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/union-2.c
index 6adf8fae5c3a56a6e50278919a2edbd2fda58f42..95de458b50172f6e84ffc2625fc35eca8f65108a 100644
--- a/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/union-2.c
+++ b/gcc/testsuite/gcc.target/arm/cmse/mainline/8_1m/union-2.c
@@ -12,9 +12,16 @@
/* { dg-final { scan-assembler "movw\tip, #65535" } } */
/* { dg-final { scan-assembler "movt\tip, 31" } } */
/* { dg-final { scan-assembler "and\tr2, r2, ip" } } */
-/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
-/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
+/* Shift on the same register as blxns. */
+/* { dg-final { scan-assembler "lsrs\t(r\[3-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
+/* { dg-final { scan-assembler "lsls\t(r\[3-9\]|r10|fp|ip), \\1, #1.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "clrm\t\{r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
+/* Check the right registers are cleared and none appears twice. */
+/* { dg-final { scan-assembler "clrm\t\{(r3, )?(r4, )?(r5, )?(r6, )?(r7, )?(r8, )?(r9, )?(r10, )?(fp, )?(ip, )?APSR\}" } } */
+/* Check that the right number of registers is cleared and thus only one
+ register is missing. */
+/* { dg-final { scan-assembler "clrm\t\{((r\[3-9\]|r10|fp|ip), ){9}APSR\}" } } */
+/* Check that no cleared register is used for blxns. */
+/* { dg-final { scan-assembler-not "clrm\t\{\[^\}\]\+(r\[3-9\]|r10|fp|ip),\[^\}\]\+\}.*blxns\t\\1" } } */
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
-/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
+/* { dg-final { scan-assembler "blxns" } } */
Attachment:
diff08.patch.gz
Description: application/gzip
| Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
|---|---|---|
| Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |