This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
On Wed, Aug 7, 2019 at 2:52 PM Richard Biener <rguenther@suse.de> wrote:
>
> On Wed, 7 Aug 2019, Uros Bizjak wrote:
>
> > On Wed, Aug 7, 2019 at 2:20 PM Uros Bizjak <ubizjak@gmail.com> wrote:
> > >
> > > On Wed, Aug 7, 2019 at 1:51 PM Richard Biener <rguenther@suse.de> wrote:
> > > >
> > > > On Wed, 7 Aug 2019, Richard Biener wrote:
> > > >
> > > > > On Mon, 5 Aug 2019, Uros Bizjak wrote:
> > > > >
> > > > > > On Mon, Aug 5, 2019 at 3:29 PM Richard Biener <rguenther@suse.de> wrote:
> > > > > >
> > > > > > > > > > > > > (define_mode_iterator MAXMIN_IMODE [SI "TARGET_SSE4_1"] [DI "TARGET_AVX512F"])
> > > > > > > > > > > > >
> > > > > > > > > > > > > and then we need to split DImode for 32bits, too.
> > > > > > > > > > > >
> > > > > > > > > > > > For now, please add "TARGET_64BIT && TARGET_AVX512F" for DImode
> > > > > > > > > > > > condition, I'll provide _doubleword splitter later.
> > > > > > > > > > >
> > > > > > > > > > > Shouldn't that be TARGET_AVX512VL instead? Or does the insn use %g0 etc.
> > > > > > > > > > > to force use of %zmmN?
> > > > > > > > > >
> > > > > > > > > > It generates V4SI mode, so - yes, AVX512VL.
> > > > > > > > >
> > > > > > > > > case SMAX:
> > > > > > > > > case SMIN:
> > > > > > > > > case UMAX:
> > > > > > > > > case UMIN:
> > > > > > > > > if ((mode == DImode && (!TARGET_64BIT || !TARGET_AVX512VL))
> > > > > > > > > || (mode == SImode && !TARGET_SSE4_1))
> > > > > > > > > return false;
> > > > > > > > >
> > > > > > > > > so there's no way to use AVX512VL for 32bit?
> > > > > > > >
> > > > > > > > There is a way, but on 32bit targets, we need to split DImode
> > > > > > > > operation to a sequence of SImode operations for unconverted pattern.
> > > > > > > > This is of course doable, but somehow more complex than simply
> > > > > > > > emitting a DImode compare + DImode cmove, which is what current
> > > > > > > > splitter does. So, a follow-up task.
> > > > > > >
> > > > > > > Ah, OK. So for the above condition we can elide the !TARGET_64BIT
> > > > > > > check we just need to properly split if we enable the scalar minmax
> > > > > > > pattern for DImode on 32bits, the STV conversion would go fine.
> > > > > >
> > > > > > Yes, that is correct.
> > > > >
> > > > > So I tested the patch below (now with appropriate ChangeLog) on
> > > > > x86_64-unknown-linux-gnu. I've thrown it at SPEC CPU 2006 with
> > > > > the obvious hmmer improvement, now checking for off-noise results
> > > > > with a 3-run on those that may have one (with more than +-1 second
> > > > > differences in the 1-run).
> > > > >
> > > > > As-is the patch likely runs into the splitting issue for DImode
> > > > > on i?86 and the patch misses functional testcases. I'll do the
> > > > > hmmer loop with both DImode and SImode and testcases to trigger
> > > > > all pattern variants with the different ISAs we have.
> > > > >
> > > > > Some of the patch could be split out (the cost changes that are
> > > > > also effective for DImode for example).
> > > > >
> > > > > AFAICS we could go with only adding SImode avoiding the DImode
> > > > > splitting thing and this would solve the hmmer regression.
> > > >
> > > > I've additionally bootstrapped with --with-arch=nehalem which
> > > > reveals
> > > >
> > > > FAIL: gcc.target/i386/minmax-2.c scan-assembler test
> > > > FAIL: gcc.target/i386/minmax-2.c scan-assembler-not cmp
> > > >
> > > > we emit cmp + cmov here now with -msse4.1 (as soon as the max
> > > > pattern is enabled I guess)
> > >
> > > Actually, we have to split using ix86_expand_int_compare. This will
> > > generate optimized CC mode.
> >
> > So, this only matters for comparisons against zero. Currently, the
> > insn_and_split pattern allows only registers, but we can add other
> > types, too. I'd say that this is benign issue.
>
> OK. So this is with your suggestions applied plus testcases as
> promised. If we remove DImode support minmax-5.c has to be adjusted
> at least.
>
> Currently re-bootstrapping / testing on x86_64-unknown-linux-gnu.
>
> I'll followup with the performance assessment (currently only
> testing on Haswell), but I guess it is easy enough to address
> issues that pop up with the various auto-testers as followup
> by adjusting the cost function (and we may get additional testcases
> then as well).
>
> OK if the re-testing shows no issues?
>
> Thanks,
> Richard.
>
> 2019-08-07 Richard Biener <rguenther@suse.de>
>
> PR target/91154
> * config/i386/i386-features.h (scalar_chain::scalar_chain): Add
> mode arguments.
> (scalar_chain::smode): New member.
> (scalar_chain::vmode): Likewise.
> (dimode_scalar_chain): Rename to...
> (general_scalar_chain): ... this.
> (general_scalar_chain::general_scalar_chain): Take mode arguments.
> (timode_scalar_chain::timode_scalar_chain): Initialize scalar_chain
> base with TImode and V1TImode.
> * config/i386/i386-features.c (scalar_chain::scalar_chain): Adjust.
> (general_scalar_chain::vector_const_cost): Adjust for SImode
> chains.
> (general_scalar_chain::compute_convert_gain): Likewise. Fix
> reg-reg move cost gain, use ix86_cost->sse_op cost and adjust
> scalar costs. Add {S,U}{MIN,MAX} support. Dump per-instruction
> gain if not zero.
> (general_scalar_chain::replace_with_subreg): Use vmode/smode.
> (general_scalar_chain::make_vector_copies): Likewise. Handle
> non-DImode chains appropriately.
> (general_scalar_chain::convert_reg): Likewise.
> (general_scalar_chain::convert_op): Likewise.
> (general_scalar_chain::convert_insn): Likewise. Add
> fatal_insn_not_found if the result is not recognized.
> (convertible_comparison_p): Pass in the scalar mode and use that.
> (general_scalar_to_vector_candidate_p): Likewise. Rename from
> dimode_scalar_to_vector_candidate_p. Add {S,U}{MIN,MAX} support.
> (scalar_to_vector_candidate_p): Remove by inlining into single
> caller.
> (general_remove_non_convertible_regs): Rename from
> dimode_remove_non_convertible_regs.
> (remove_non_convertible_regs): Remove by inlining into single caller.
> (convert_scalars_to_vector): Handle SImode and DImode chains
> in addition to TImode chains.
> * config/i386/i386.md (<maxmin><SWI48>3): New insn split after STV.
>
> * gcc.target/i386/pr91154.c: New testcase.
> * gcc.target/i386/minmax-3.c: Likewise.
> * gcc.target/i386/minmax-4.c: Likewise.
> * gcc.target/i386/minmax-5.c: Likewise.
LGTM, perhaps someone with RTL background should also take a look.
(I plan to enhance the new pattern in .md a bit once the patch landing settles.)
Uros.
> Index: gcc/config/i386/i386-features.c
> ===================================================================
> --- gcc/config/i386/i386-features.c (revision 274111)
> +++ gcc/config/i386/i386-features.c (working copy)
> @@ -276,8 +276,11 @@ unsigned scalar_chain::max_id = 0;
>
> /* Initialize new chain. */
>
> -scalar_chain::scalar_chain ()
> +scalar_chain::scalar_chain (enum machine_mode smode_, enum machine_mode vmode_)
> {
> + smode = smode_;
> + vmode = vmode_;
> +
> chain_id = ++max_id;
>
> if (dump_file)
> @@ -319,7 +322,7 @@ scalar_chain::add_to_queue (unsigned ins
> conversion. */
>
> void
> -dimode_scalar_chain::mark_dual_mode_def (df_ref def)
> +general_scalar_chain::mark_dual_mode_def (df_ref def)
> {
> gcc_assert (DF_REF_REG_DEF_P (def));
>
> @@ -409,6 +412,9 @@ scalar_chain::add_insn (bitmap candidate
> && !HARD_REGISTER_P (SET_DEST (def_set)))
> bitmap_set_bit (defs, REGNO (SET_DEST (def_set)));
>
> + /* ??? The following is quadratic since analyze_register_chain
> + iterates over all refs to look for dual-mode regs. Instead this
> + should be done separately for all regs mentioned in the chain once. */
> df_ref ref;
> df_ref def;
> for (ref = DF_INSN_UID_DEFS (insn_uid); ref; ref = DF_REF_NEXT_LOC (ref))
> @@ -469,19 +475,21 @@ scalar_chain::build (bitmap candidates,
> instead of using a scalar one. */
>
> int
> -dimode_scalar_chain::vector_const_cost (rtx exp)
> +general_scalar_chain::vector_const_cost (rtx exp)
> {
> gcc_assert (CONST_INT_P (exp));
>
> - if (standard_sse_constant_p (exp, V2DImode))
> - return COSTS_N_INSNS (1);
> - return ix86_cost->sse_load[1];
> + if (standard_sse_constant_p (exp, vmode))
> + return ix86_cost->sse_op;
> + /* We have separate costs for SImode and DImode, use SImode costs
> + for smaller modes. */
> + return ix86_cost->sse_load[smode == DImode ? 1 : 0];
> }
>
> /* Compute a gain for chain conversion. */
>
> int
> -dimode_scalar_chain::compute_convert_gain ()
> +general_scalar_chain::compute_convert_gain ()
> {
> bitmap_iterator bi;
> unsigned insn_uid;
> @@ -491,28 +499,37 @@ dimode_scalar_chain::compute_convert_gai
> if (dump_file)
> fprintf (dump_file, "Computing gain for chain #%d...\n", chain_id);
>
> + /* SSE costs distinguish between SImode and DImode loads/stores, for
> + int costs factor in the number of GPRs involved. When supporting
> + smaller modes than SImode the int load/store costs need to be
> + adjusted as well. */
> + unsigned sse_cost_idx = smode == DImode ? 1 : 0;
> + unsigned m = smode == DImode ? (TARGET_64BIT ? 1 : 2) : 1;
> +
> EXECUTE_IF_SET_IN_BITMAP (insns, 0, insn_uid, bi)
> {
> rtx_insn *insn = DF_INSN_UID_GET (insn_uid)->insn;
> rtx def_set = single_set (insn);
> rtx src = SET_SRC (def_set);
> rtx dst = SET_DEST (def_set);
> + int igain = 0;
>
> if (REG_P (src) && REG_P (dst))
> - gain += COSTS_N_INSNS (2) - ix86_cost->xmm_move;
> + igain += 2 * m - ix86_cost->xmm_move;
> else if (REG_P (src) && MEM_P (dst))
> - gain += 2 * ix86_cost->int_store[2] - ix86_cost->sse_store[1];
> + igain
> + += m * ix86_cost->int_store[2] - ix86_cost->sse_store[sse_cost_idx];
> else if (MEM_P (src) && REG_P (dst))
> - gain += 2 * ix86_cost->int_load[2] - ix86_cost->sse_load[1];
> + igain += m * ix86_cost->int_load[2] - ix86_cost->sse_load[sse_cost_idx];
> else if (GET_CODE (src) == ASHIFT
> || GET_CODE (src) == ASHIFTRT
> || GET_CODE (src) == LSHIFTRT)
> {
> if (CONST_INT_P (XEXP (src, 0)))
> - gain -= vector_const_cost (XEXP (src, 0));
> - gain += ix86_cost->shift_const;
> + igain -= vector_const_cost (XEXP (src, 0));
> + igain += m * ix86_cost->shift_const - ix86_cost->sse_op;
> if (INTVAL (XEXP (src, 1)) >= 32)
> - gain -= COSTS_N_INSNS (1);
> + igain -= COSTS_N_INSNS (1);
> }
> else if (GET_CODE (src) == PLUS
> || GET_CODE (src) == MINUS
> @@ -520,20 +537,31 @@ dimode_scalar_chain::compute_convert_gai
> || GET_CODE (src) == XOR
> || GET_CODE (src) == AND)
> {
> - gain += ix86_cost->add;
> + igain += m * ix86_cost->add - ix86_cost->sse_op;
> /* Additional gain for andnot for targets without BMI. */
> if (GET_CODE (XEXP (src, 0)) == NOT
> && !TARGET_BMI)
> - gain += 2 * ix86_cost->add;
> + igain += m * ix86_cost->add;
>
> if (CONST_INT_P (XEXP (src, 0)))
> - gain -= vector_const_cost (XEXP (src, 0));
> + igain -= vector_const_cost (XEXP (src, 0));
> if (CONST_INT_P (XEXP (src, 1)))
> - gain -= vector_const_cost (XEXP (src, 1));
> + igain -= vector_const_cost (XEXP (src, 1));
> }
> else if (GET_CODE (src) == NEG
> || GET_CODE (src) == NOT)
> - gain += ix86_cost->add - COSTS_N_INSNS (1);
> + igain += m * ix86_cost->add - ix86_cost->sse_op;
> + else if (GET_CODE (src) == SMAX
> + || GET_CODE (src) == SMIN
> + || GET_CODE (src) == UMAX
> + || GET_CODE (src) == UMIN)
> + {
> + /* We do not have any conditional move cost, estimate it as a
> + reg-reg move. Comparisons are costed as adds. */
> + igain += m * (COSTS_N_INSNS (2) + ix86_cost->add);
> + /* Integer SSE ops are all costed the same. */
> + igain -= ix86_cost->sse_op;
> + }
> else if (GET_CODE (src) == COMPARE)
> {
> /* Assume comparison cost is the same. */
> @@ -541,18 +569,28 @@ dimode_scalar_chain::compute_convert_gai
> else if (CONST_INT_P (src))
> {
> if (REG_P (dst))
> - gain += COSTS_N_INSNS (2);
> + /* DImode can be immediate for TARGET_64BIT and SImode always. */
> + igain += COSTS_N_INSNS (m);
> else if (MEM_P (dst))
> - gain += 2 * ix86_cost->int_store[2] - ix86_cost->sse_store[1];
> - gain -= vector_const_cost (src);
> + igain += (m * ix86_cost->int_store[2]
> + - ix86_cost->sse_store[sse_cost_idx]);
> + igain -= vector_const_cost (src);
> }
> else
> gcc_unreachable ();
> +
> + if (igain != 0 && dump_file)
> + {
> + fprintf (dump_file, " Instruction gain %d for ", igain);
> + dump_insn_slim (dump_file, insn);
> + }
> + gain += igain;
> }
>
> if (dump_file)
> fprintf (dump_file, " Instruction conversion gain: %d\n", gain);
>
> + /* ??? What about integer to SSE? */
> EXECUTE_IF_SET_IN_BITMAP (defs_conv, 0, insn_uid, bi)
> cost += DF_REG_DEF_COUNT (insn_uid) * ix86_cost->sse_to_integer;
>
> @@ -570,10 +608,10 @@ dimode_scalar_chain::compute_convert_gai
> /* Replace REG in X with a V2DI subreg of NEW_REG. */
>
> rtx
> -dimode_scalar_chain::replace_with_subreg (rtx x, rtx reg, rtx new_reg)
> +general_scalar_chain::replace_with_subreg (rtx x, rtx reg, rtx new_reg)
> {
> if (x == reg)
> - return gen_rtx_SUBREG (V2DImode, new_reg, 0);
> + return gen_rtx_SUBREG (vmode, new_reg, 0);
>
> const char *fmt = GET_RTX_FORMAT (GET_CODE (x));
> int i, j;
> @@ -593,7 +631,7 @@ dimode_scalar_chain::replace_with_subreg
> /* Replace REG in INSN with a V2DI subreg of NEW_REG. */
>
> void
> -dimode_scalar_chain::replace_with_subreg_in_insn (rtx_insn *insn,
> +general_scalar_chain::replace_with_subreg_in_insn (rtx_insn *insn,
> rtx reg, rtx new_reg)
> {
> replace_with_subreg (single_set (insn), reg, new_reg);
> @@ -624,10 +662,10 @@ scalar_chain::emit_conversion_insns (rtx
> and replace its uses in a chain. */
>
> void
> -dimode_scalar_chain::make_vector_copies (unsigned regno)
> +general_scalar_chain::make_vector_copies (unsigned regno)
> {
> rtx reg = regno_reg_rtx[regno];
> - rtx vreg = gen_reg_rtx (DImode);
> + rtx vreg = gen_reg_rtx (smode);
> df_ref ref;
>
> for (ref = DF_REG_DEF_CHAIN (regno); ref; ref = DF_REF_NEXT_REG (ref))
> @@ -636,37 +674,47 @@ dimode_scalar_chain::make_vector_copies
> start_sequence ();
> if (!TARGET_INTER_UNIT_MOVES_TO_VEC)
> {
> - rtx tmp = assign_386_stack_local (DImode, SLOT_STV_TEMP);
> - emit_move_insn (adjust_address (tmp, SImode, 0),
> - gen_rtx_SUBREG (SImode, reg, 0));
> - emit_move_insn (adjust_address (tmp, SImode, 4),
> - gen_rtx_SUBREG (SImode, reg, 4));
> + rtx tmp = assign_386_stack_local (smode, SLOT_STV_TEMP);
> + if (smode == DImode && !TARGET_64BIT)
> + {
> + emit_move_insn (adjust_address (tmp, SImode, 0),
> + gen_rtx_SUBREG (SImode, reg, 0));
> + emit_move_insn (adjust_address (tmp, SImode, 4),
> + gen_rtx_SUBREG (SImode, reg, 4));
> + }
> + else
> + emit_move_insn (tmp, reg);
> emit_move_insn (vreg, tmp);
> }
> - else if (TARGET_SSE4_1)
> + else if (!TARGET_64BIT && smode == DImode)
> {
> - emit_insn (gen_sse2_loadld (gen_rtx_SUBREG (V4SImode, vreg, 0),
> - CONST0_RTX (V4SImode),
> - gen_rtx_SUBREG (SImode, reg, 0)));
> - emit_insn (gen_sse4_1_pinsrd (gen_rtx_SUBREG (V4SImode, vreg, 0),
> - gen_rtx_SUBREG (V4SImode, vreg, 0),
> - gen_rtx_SUBREG (SImode, reg, 4),
> - GEN_INT (2)));
> + if (TARGET_SSE4_1)
> + {
> + emit_insn (gen_sse2_loadld (gen_rtx_SUBREG (V4SImode, vreg, 0),
> + CONST0_RTX (V4SImode),
> + gen_rtx_SUBREG (SImode, reg, 0)));
> + emit_insn (gen_sse4_1_pinsrd (gen_rtx_SUBREG (V4SImode, vreg, 0),
> + gen_rtx_SUBREG (V4SImode, vreg, 0),
> + gen_rtx_SUBREG (SImode, reg, 4),
> + GEN_INT (2)));
> + }
> + else
> + {
> + rtx tmp = gen_reg_rtx (DImode);
> + emit_insn (gen_sse2_loadld (gen_rtx_SUBREG (V4SImode, vreg, 0),
> + CONST0_RTX (V4SImode),
> + gen_rtx_SUBREG (SImode, reg, 0)));
> + emit_insn (gen_sse2_loadld (gen_rtx_SUBREG (V4SImode, tmp, 0),
> + CONST0_RTX (V4SImode),
> + gen_rtx_SUBREG (SImode, reg, 4)));
> + emit_insn (gen_vec_interleave_lowv4si
> + (gen_rtx_SUBREG (V4SImode, vreg, 0),
> + gen_rtx_SUBREG (V4SImode, vreg, 0),
> + gen_rtx_SUBREG (V4SImode, tmp, 0)));
> + }
> }
> else
> - {
> - rtx tmp = gen_reg_rtx (DImode);
> - emit_insn (gen_sse2_loadld (gen_rtx_SUBREG (V4SImode, vreg, 0),
> - CONST0_RTX (V4SImode),
> - gen_rtx_SUBREG (SImode, reg, 0)));
> - emit_insn (gen_sse2_loadld (gen_rtx_SUBREG (V4SImode, tmp, 0),
> - CONST0_RTX (V4SImode),
> - gen_rtx_SUBREG (SImode, reg, 4)));
> - emit_insn (gen_vec_interleave_lowv4si
> - (gen_rtx_SUBREG (V4SImode, vreg, 0),
> - gen_rtx_SUBREG (V4SImode, vreg, 0),
> - gen_rtx_SUBREG (V4SImode, tmp, 0)));
> - }
> + emit_move_insn (gen_lowpart (smode, vreg), reg);
> rtx_insn *seq = get_insns ();
> end_sequence ();
> rtx_insn *insn = DF_REF_INSN (ref);
> @@ -695,7 +743,7 @@ dimode_scalar_chain::make_vector_copies
> in case register is used in not convertible insn. */
>
> void
> -dimode_scalar_chain::convert_reg (unsigned regno)
> +general_scalar_chain::convert_reg (unsigned regno)
> {
> bool scalar_copy = bitmap_bit_p (defs_conv, regno);
> rtx reg = regno_reg_rtx[regno];
> @@ -707,7 +755,7 @@ dimode_scalar_chain::convert_reg (unsign
> bitmap_copy (conv, insns);
>
> if (scalar_copy)
> - scopy = gen_reg_rtx (DImode);
> + scopy = gen_reg_rtx (smode);
>
> for (ref = DF_REG_DEF_CHAIN (regno); ref; ref = DF_REF_NEXT_REG (ref))
> {
> @@ -727,40 +775,55 @@ dimode_scalar_chain::convert_reg (unsign
> start_sequence ();
> if (!TARGET_INTER_UNIT_MOVES_FROM_VEC)
> {
> - rtx tmp = assign_386_stack_local (DImode, SLOT_STV_TEMP);
> + rtx tmp = assign_386_stack_local (smode, SLOT_STV_TEMP);
> emit_move_insn (tmp, reg);
> - emit_move_insn (gen_rtx_SUBREG (SImode, scopy, 0),
> - adjust_address (tmp, SImode, 0));
> - emit_move_insn (gen_rtx_SUBREG (SImode, scopy, 4),
> - adjust_address (tmp, SImode, 4));
> + if (!TARGET_64BIT && smode == DImode)
> + {
> + emit_move_insn (gen_rtx_SUBREG (SImode, scopy, 0),
> + adjust_address (tmp, SImode, 0));
> + emit_move_insn (gen_rtx_SUBREG (SImode, scopy, 4),
> + adjust_address (tmp, SImode, 4));
> + }
> + else
> + emit_move_insn (scopy, tmp);
> }
> - else if (TARGET_SSE4_1)
> + else if (!TARGET_64BIT && smode == DImode)
> {
> - rtx tmp = gen_rtx_PARALLEL (VOIDmode, gen_rtvec (1, const0_rtx));
> - emit_insn
> - (gen_rtx_SET
> - (gen_rtx_SUBREG (SImode, scopy, 0),
> - gen_rtx_VEC_SELECT (SImode,
> - gen_rtx_SUBREG (V4SImode, reg, 0), tmp)));
> -
> - tmp = gen_rtx_PARALLEL (VOIDmode, gen_rtvec (1, const1_rtx));
> - emit_insn
> - (gen_rtx_SET
> - (gen_rtx_SUBREG (SImode, scopy, 4),
> - gen_rtx_VEC_SELECT (SImode,
> - gen_rtx_SUBREG (V4SImode, reg, 0), tmp)));
> + if (TARGET_SSE4_1)
> + {
> + rtx tmp = gen_rtx_PARALLEL (VOIDmode,
> + gen_rtvec (1, const0_rtx));
> + emit_insn
> + (gen_rtx_SET
> + (gen_rtx_SUBREG (SImode, scopy, 0),
> + gen_rtx_VEC_SELECT (SImode,
> + gen_rtx_SUBREG (V4SImode, reg, 0),
> + tmp)));
> +
> + tmp = gen_rtx_PARALLEL (VOIDmode, gen_rtvec (1, const1_rtx));
> + emit_insn
> + (gen_rtx_SET
> + (gen_rtx_SUBREG (SImode, scopy, 4),
> + gen_rtx_VEC_SELECT (SImode,
> + gen_rtx_SUBREG (V4SImode, reg, 0),
> + tmp)));
> + }
> + else
> + {
> + rtx vcopy = gen_reg_rtx (V2DImode);
> + emit_move_insn (vcopy, gen_rtx_SUBREG (V2DImode, reg, 0));
> + emit_move_insn (gen_rtx_SUBREG (SImode, scopy, 0),
> + gen_rtx_SUBREG (SImode, vcopy, 0));
> + emit_move_insn (vcopy,
> + gen_rtx_LSHIFTRT (V2DImode,
> + vcopy, GEN_INT (32)));
> + emit_move_insn (gen_rtx_SUBREG (SImode, scopy, 4),
> + gen_rtx_SUBREG (SImode, vcopy, 0));
> + }
> }
> else
> - {
> - rtx vcopy = gen_reg_rtx (V2DImode);
> - emit_move_insn (vcopy, gen_rtx_SUBREG (V2DImode, reg, 0));
> - emit_move_insn (gen_rtx_SUBREG (SImode, scopy, 0),
> - gen_rtx_SUBREG (SImode, vcopy, 0));
> - emit_move_insn (vcopy,
> - gen_rtx_LSHIFTRT (V2DImode, vcopy, GEN_INT (32)));
> - emit_move_insn (gen_rtx_SUBREG (SImode, scopy, 4),
> - gen_rtx_SUBREG (SImode, vcopy, 0));
> - }
> + emit_move_insn (scopy, reg);
> +
> rtx_insn *seq = get_insns ();
> end_sequence ();
> emit_conversion_insns (seq, insn);
> @@ -809,21 +872,21 @@ dimode_scalar_chain::convert_reg (unsign
> registers conversion. */
>
> void
> -dimode_scalar_chain::convert_op (rtx *op, rtx_insn *insn)
> +general_scalar_chain::convert_op (rtx *op, rtx_insn *insn)
> {
> *op = copy_rtx_if_shared (*op);
>
> if (GET_CODE (*op) == NOT)
> {
> convert_op (&XEXP (*op, 0), insn);
> - PUT_MODE (*op, V2DImode);
> + PUT_MODE (*op, vmode);
> }
> else if (MEM_P (*op))
> {
> - rtx tmp = gen_reg_rtx (DImode);
> + rtx tmp = gen_reg_rtx (GET_MODE (*op));
>
> emit_insn_before (gen_move_insn (tmp, *op), insn);
> - *op = gen_rtx_SUBREG (V2DImode, tmp, 0);
> + *op = gen_rtx_SUBREG (vmode, tmp, 0);
>
> if (dump_file)
> fprintf (dump_file, " Preloading operand for insn %d into r%d\n",
> @@ -841,24 +904,30 @@ dimode_scalar_chain::convert_op (rtx *op
> gcc_assert (!DF_REF_CHAIN (ref));
> break;
> }
> - *op = gen_rtx_SUBREG (V2DImode, *op, 0);
> + *op = gen_rtx_SUBREG (vmode, *op, 0);
> }
> else if (CONST_INT_P (*op))
> {
> rtx vec_cst;
> - rtx tmp = gen_rtx_SUBREG (V2DImode, gen_reg_rtx (DImode), 0);
> + rtx tmp = gen_rtx_SUBREG (vmode, gen_reg_rtx (smode), 0);
>
> /* Prefer all ones vector in case of -1. */
> if (constm1_operand (*op, GET_MODE (*op)))
> - vec_cst = CONSTM1_RTX (V2DImode);
> + vec_cst = CONSTM1_RTX (vmode);
> else
> - vec_cst = gen_rtx_CONST_VECTOR (V2DImode,
> - gen_rtvec (2, *op, const0_rtx));
> + {
> + unsigned n = GET_MODE_NUNITS (vmode);
> + rtx *v = XALLOCAVEC (rtx, n);
> + v[0] = *op;
> + for (unsigned i = 1; i < n; ++i)
> + v[i] = const0_rtx;
> + vec_cst = gen_rtx_CONST_VECTOR (vmode, gen_rtvec_v (n, v));
> + }
>
> - if (!standard_sse_constant_p (vec_cst, V2DImode))
> + if (!standard_sse_constant_p (vec_cst, vmode))
> {
> start_sequence ();
> - vec_cst = validize_mem (force_const_mem (V2DImode, vec_cst));
> + vec_cst = validize_mem (force_const_mem (vmode, vec_cst));
> rtx_insn *seq = get_insns ();
> end_sequence ();
> emit_insn_before (seq, insn);
> @@ -870,14 +939,14 @@ dimode_scalar_chain::convert_op (rtx *op
> else
> {
> gcc_assert (SUBREG_P (*op));
> - gcc_assert (GET_MODE (*op) == V2DImode);
> + gcc_assert (GET_MODE (*op) == vmode);
> }
> }
>
> /* Convert INSN to vector mode. */
>
> void
> -dimode_scalar_chain::convert_insn (rtx_insn *insn)
> +general_scalar_chain::convert_insn (rtx_insn *insn)
> {
> rtx def_set = single_set (insn);
> rtx src = SET_SRC (def_set);
> @@ -888,9 +957,9 @@ dimode_scalar_chain::convert_insn (rtx_i
> {
> /* There are no scalar integer instructions and therefore
> temporary register usage is required. */
> - rtx tmp = gen_reg_rtx (DImode);
> + rtx tmp = gen_reg_rtx (GET_MODE (dst));
> emit_conversion_insns (gen_move_insn (dst, tmp), insn);
> - dst = gen_rtx_SUBREG (V2DImode, tmp, 0);
> + dst = gen_rtx_SUBREG (vmode, tmp, 0);
> }
>
> switch (GET_CODE (src))
> @@ -899,7 +968,7 @@ dimode_scalar_chain::convert_insn (rtx_i
> case ASHIFTRT:
> case LSHIFTRT:
> convert_op (&XEXP (src, 0), insn);
> - PUT_MODE (src, V2DImode);
> + PUT_MODE (src, vmode);
> break;
>
> case PLUS:
> @@ -907,25 +976,29 @@ dimode_scalar_chain::convert_insn (rtx_i
> case IOR:
> case XOR:
> case AND:
> + case SMAX:
> + case SMIN:
> + case UMAX:
> + case UMIN:
> convert_op (&XEXP (src, 0), insn);
> convert_op (&XEXP (src, 1), insn);
> - PUT_MODE (src, V2DImode);
> + PUT_MODE (src, vmode);
> break;
>
> case NEG:
> src = XEXP (src, 0);
> convert_op (&src, insn);
> - subreg = gen_reg_rtx (V2DImode);
> - emit_insn_before (gen_move_insn (subreg, CONST0_RTX (V2DImode)), insn);
> - src = gen_rtx_MINUS (V2DImode, subreg, src);
> + subreg = gen_reg_rtx (vmode);
> + emit_insn_before (gen_move_insn (subreg, CONST0_RTX (vmode)), insn);
> + src = gen_rtx_MINUS (vmode, subreg, src);
> break;
>
> case NOT:
> src = XEXP (src, 0);
> convert_op (&src, insn);
> - subreg = gen_reg_rtx (V2DImode);
> - emit_insn_before (gen_move_insn (subreg, CONSTM1_RTX (V2DImode)), insn);
> - src = gen_rtx_XOR (V2DImode, src, subreg);
> + subreg = gen_reg_rtx (vmode);
> + emit_insn_before (gen_move_insn (subreg, CONSTM1_RTX (vmode)), insn);
> + src = gen_rtx_XOR (vmode, src, subreg);
> break;
>
> case MEM:
> @@ -939,17 +1012,17 @@ dimode_scalar_chain::convert_insn (rtx_i
> break;
>
> case SUBREG:
> - gcc_assert (GET_MODE (src) == V2DImode);
> + gcc_assert (GET_MODE (src) == vmode);
> break;
>
> case COMPARE:
> src = SUBREG_REG (XEXP (XEXP (src, 0), 0));
>
> - gcc_assert ((REG_P (src) && GET_MODE (src) == DImode)
> - || (SUBREG_P (src) && GET_MODE (src) == V2DImode));
> + gcc_assert ((REG_P (src) && GET_MODE (src) == GET_MODE_INNER (vmode))
> + || (SUBREG_P (src) && GET_MODE (src) == vmode));
>
> if (REG_P (src))
> - subreg = gen_rtx_SUBREG (V2DImode, src, 0);
> + subreg = gen_rtx_SUBREG (vmode, src, 0);
> else
> subreg = copy_rtx_if_shared (src);
> emit_insn_before (gen_vec_interleave_lowv2di (copy_rtx_if_shared (subreg),
> @@ -977,7 +1050,9 @@ dimode_scalar_chain::convert_insn (rtx_i
> PATTERN (insn) = def_set;
>
> INSN_CODE (insn) = -1;
> - recog_memoized (insn);
> + int patt = recog_memoized (insn);
> + if (patt == -1)
> + fatal_insn_not_found (insn);
> df_insn_rescan (insn);
> }
>
> @@ -1116,7 +1191,7 @@ timode_scalar_chain::convert_insn (rtx_i
> }
>
> void
> -dimode_scalar_chain::convert_registers ()
> +general_scalar_chain::convert_registers ()
> {
> bitmap_iterator bi;
> unsigned id;
> @@ -1186,7 +1261,7 @@ has_non_address_hard_reg (rtx_insn *insn
> (const_int 0 [0]))) */
>
> static bool
> -convertible_comparison_p (rtx_insn *insn)
> +convertible_comparison_p (rtx_insn *insn, enum machine_mode mode)
> {
> if (!TARGET_SSE4_1)
> return false;
> @@ -1219,12 +1294,12 @@ convertible_comparison_p (rtx_insn *insn
>
> if (!SUBREG_P (op1)
> || !SUBREG_P (op2)
> - || GET_MODE (op1) != SImode
> - || GET_MODE (op2) != SImode
> + || GET_MODE (op1) != mode
> + || GET_MODE (op2) != mode
> || ((SUBREG_BYTE (op1) != 0
> - || SUBREG_BYTE (op2) != GET_MODE_SIZE (SImode))
> + || SUBREG_BYTE (op2) != GET_MODE_SIZE (mode))
> && (SUBREG_BYTE (op2) != 0
> - || SUBREG_BYTE (op1) != GET_MODE_SIZE (SImode))))
> + || SUBREG_BYTE (op1) != GET_MODE_SIZE (mode))))
> return false;
>
> op1 = SUBREG_REG (op1);
> @@ -1232,7 +1307,7 @@ convertible_comparison_p (rtx_insn *insn
>
> if (op1 != op2
> || !REG_P (op1)
> - || GET_MODE (op1) != DImode)
> + || GET_MODE (op1) != GET_MODE_WIDER_MODE (mode).else_blk ())
> return false;
>
> return true;
> @@ -1241,7 +1316,7 @@ convertible_comparison_p (rtx_insn *insn
> /* The DImode version of scalar_to_vector_candidate_p. */
>
> static bool
> -dimode_scalar_to_vector_candidate_p (rtx_insn *insn)
> +general_scalar_to_vector_candidate_p (rtx_insn *insn, enum machine_mode mode)
> {
> rtx def_set = single_set (insn);
>
> @@ -1255,12 +1330,12 @@ dimode_scalar_to_vector_candidate_p (rtx
> rtx dst = SET_DEST (def_set);
>
> if (GET_CODE (src) == COMPARE)
> - return convertible_comparison_p (insn);
> + return convertible_comparison_p (insn, mode);
>
> /* We are interested in DImode promotion only. */
> - if ((GET_MODE (src) != DImode
> + if ((GET_MODE (src) != mode
> && !CONST_INT_P (src))
> - || GET_MODE (dst) != DImode)
> + || GET_MODE (dst) != mode)
> return false;
>
> if (!REG_P (dst) && !MEM_P (dst))
> @@ -1280,6 +1355,15 @@ dimode_scalar_to_vector_candidate_p (rtx
> return false;
> break;
>
> + case SMAX:
> + case SMIN:
> + case UMAX:
> + case UMIN:
> + if ((mode == DImode && (!TARGET_64BIT || !TARGET_AVX512VL))
> + || (mode == SImode && !TARGET_SSE4_1))
> + return false;
> + /* Fallthru. */
> +
> case PLUS:
> case MINUS:
> case IOR:
> @@ -1290,7 +1374,7 @@ dimode_scalar_to_vector_candidate_p (rtx
> && !CONST_INT_P (XEXP (src, 1)))
> return false;
>
> - if (GET_MODE (XEXP (src, 1)) != DImode
> + if (GET_MODE (XEXP (src, 1)) != mode
> && !CONST_INT_P (XEXP (src, 1)))
> return false;
> break;
> @@ -1319,7 +1403,7 @@ dimode_scalar_to_vector_candidate_p (rtx
> || !REG_P (XEXP (XEXP (src, 0), 0))))
> return false;
>
> - if (GET_MODE (XEXP (src, 0)) != DImode
> + if (GET_MODE (XEXP (src, 0)) != mode
> && !CONST_INT_P (XEXP (src, 0)))
> return false;
>
> @@ -1383,22 +1467,16 @@ timode_scalar_to_vector_candidate_p (rtx
> return false;
> }
>
> -/* Return 1 if INSN may be converted into vector
> - instruction. */
> -
> -static bool
> -scalar_to_vector_candidate_p (rtx_insn *insn)
> -{
> - if (TARGET_64BIT)
> - return timode_scalar_to_vector_candidate_p (insn);
> - else
> - return dimode_scalar_to_vector_candidate_p (insn);
> -}
> +/* For a given bitmap of insn UIDs scans all instruction and
> + remove insn from CANDIDATES in case it has both convertible
> + and not convertible definitions.
>
> -/* The DImode version of remove_non_convertible_regs. */
> + All insns in a bitmap are conversion candidates according to
> + scalar_to_vector_candidate_p. Currently it implies all insns
> + are single_set. */
>
> static void
> -dimode_remove_non_convertible_regs (bitmap candidates)
> +general_remove_non_convertible_regs (bitmap candidates)
> {
> bitmap_iterator bi;
> unsigned id;
> @@ -1553,23 +1631,6 @@ timode_remove_non_convertible_regs (bitm
> BITMAP_FREE (regs);
> }
>
> -/* For a given bitmap of insn UIDs scans all instruction and
> - remove insn from CANDIDATES in case it has both convertible
> - and not convertible definitions.
> -
> - All insns in a bitmap are conversion candidates according to
> - scalar_to_vector_candidate_p. Currently it implies all insns
> - are single_set. */
> -
> -static void
> -remove_non_convertible_regs (bitmap candidates)
> -{
> - if (TARGET_64BIT)
> - timode_remove_non_convertible_regs (candidates);
> - else
> - dimode_remove_non_convertible_regs (candidates);
> -}
> -
> /* Main STV pass function. Find and convert scalar
> instructions into vector mode when profitable. */
>
> @@ -1577,11 +1638,14 @@ static unsigned int
> convert_scalars_to_vector ()
> {
> basic_block bb;
> - bitmap candidates;
> int converted_insns = 0;
>
> bitmap_obstack_initialize (NULL);
> - candidates = BITMAP_ALLOC (NULL);
> + const machine_mode cand_mode[3] = { SImode, DImode, TImode };
> + const machine_mode cand_vmode[3] = { V4SImode, V2DImode, V1TImode };
> + bitmap_head candidates[3]; /* { SImode, DImode, TImode } */
> + for (unsigned i = 0; i < 3; ++i)
> + bitmap_initialize (&candidates[i], &bitmap_default_obstack);
>
> calculate_dominance_info (CDI_DOMINATORS);
> df_set_flags (DF_DEFER_INSN_RESCAN);
> @@ -1597,51 +1661,73 @@ convert_scalars_to_vector ()
> {
> rtx_insn *insn;
> FOR_BB_INSNS (bb, insn)
> - if (scalar_to_vector_candidate_p (insn))
> + if (TARGET_64BIT
> + && timode_scalar_to_vector_candidate_p (insn))
> {
> if (dump_file)
> - fprintf (dump_file, " insn %d is marked as a candidate\n",
> + fprintf (dump_file, " insn %d is marked as a TImode candidate\n",
> INSN_UID (insn));
>
> - bitmap_set_bit (candidates, INSN_UID (insn));
> + bitmap_set_bit (&candidates[2], INSN_UID (insn));
> + }
> + else
> + {
> + /* Check {SI,DI}mode. */
> + for (unsigned i = 0; i <= 1; ++i)
> + if (general_scalar_to_vector_candidate_p (insn, cand_mode[i]))
> + {
> + if (dump_file)
> + fprintf (dump_file, " insn %d is marked as a %s candidate\n",
> + INSN_UID (insn), i == 0 ? "SImode" : "DImode");
> +
> + bitmap_set_bit (&candidates[i], INSN_UID (insn));
> + break;
> + }
> }
> }
>
> - remove_non_convertible_regs (candidates);
> + if (TARGET_64BIT)
> + timode_remove_non_convertible_regs (&candidates[2]);
> + for (unsigned i = 0; i <= 1; ++i)
> + general_remove_non_convertible_regs (&candidates[i]);
>
> - if (bitmap_empty_p (candidates))
> - if (dump_file)
> + for (unsigned i = 0; i <= 2; ++i)
> + if (!bitmap_empty_p (&candidates[i]))
> + break;
> + else if (i == 2 && dump_file)
> fprintf (dump_file, "There are no candidates for optimization.\n");
>
> - while (!bitmap_empty_p (candidates))
> - {
> - unsigned uid = bitmap_first_set_bit (candidates);
> - scalar_chain *chain;
> + for (unsigned i = 0; i <= 2; ++i)
> + while (!bitmap_empty_p (&candidates[i]))
> + {
> + unsigned uid = bitmap_first_set_bit (&candidates[i]);
> + scalar_chain *chain;
>
> - if (TARGET_64BIT)
> - chain = new timode_scalar_chain;
> - else
> - chain = new dimode_scalar_chain;
> + if (cand_mode[i] == TImode)
> + chain = new timode_scalar_chain;
> + else
> + chain = new general_scalar_chain (cand_mode[i], cand_vmode[i]);
>
> - /* Find instructions chain we want to convert to vector mode.
> - Check all uses and definitions to estimate all required
> - conversions. */
> - chain->build (candidates, uid);
> + /* Find instructions chain we want to convert to vector mode.
> + Check all uses and definitions to estimate all required
> + conversions. */
> + chain->build (&candidates[i], uid);
>
> - if (chain->compute_convert_gain () > 0)
> - converted_insns += chain->convert ();
> - else
> - if (dump_file)
> - fprintf (dump_file, "Chain #%d conversion is not profitable\n",
> - chain->chain_id);
> + if (chain->compute_convert_gain () > 0)
> + converted_insns += chain->convert ();
> + else
> + if (dump_file)
> + fprintf (dump_file, "Chain #%d conversion is not profitable\n",
> + chain->chain_id);
>
> - delete chain;
> - }
> + delete chain;
> + }
>
> if (dump_file)
> fprintf (dump_file, "Total insns converted: %d\n", converted_insns);
>
> - BITMAP_FREE (candidates);
> + for (unsigned i = 0; i <= 2; ++i)
> + bitmap_release (&candidates[i]);
> bitmap_obstack_release (NULL);
> df_process_deferred_rescans ();
>
> Index: gcc/config/i386/i386-features.h
> ===================================================================
> --- gcc/config/i386/i386-features.h (revision 274111)
> +++ gcc/config/i386/i386-features.h (working copy)
> @@ -127,11 +127,16 @@ namespace {
> class scalar_chain
> {
> public:
> - scalar_chain ();
> + scalar_chain (enum machine_mode, enum machine_mode);
> virtual ~scalar_chain ();
>
> static unsigned max_id;
>
> + /* Scalar mode. */
> + enum machine_mode smode;
> + /* Vector mode. */
> + enum machine_mode vmode;
> +
> /* ID of a chain. */
> unsigned int chain_id;
> /* A queue of instructions to be included into a chain. */
> @@ -159,9 +164,11 @@ class scalar_chain
> virtual void convert_registers () = 0;
> };
>
> -class dimode_scalar_chain : public scalar_chain
> +class general_scalar_chain : public scalar_chain
> {
> public:
> + general_scalar_chain (enum machine_mode smode_, enum machine_mode vmode_)
> + : scalar_chain (smode_, vmode_) {}
> int compute_convert_gain ();
> private:
> void mark_dual_mode_def (df_ref def);
> @@ -178,6 +185,8 @@ class dimode_scalar_chain : public scala
> class timode_scalar_chain : public scalar_chain
> {
> public:
> + timode_scalar_chain () : scalar_chain (TImode, V1TImode) {}
> +
> /* Convert from TImode to V1TImode is always faster. */
> int compute_convert_gain () { return 1; }
>
> Index: gcc/config/i386/i386.md
> ===================================================================
> --- gcc/config/i386/i386.md (revision 274111)
> +++ gcc/config/i386/i386.md (working copy)
> @@ -17721,6 +17721,31 @@ (define_peephole2
> std::swap (operands[4], operands[5]);
> })
>
> +;; min/max patterns
> +
> +(define_mode_iterator MAXMIN_IMODE
> + [(SI "TARGET_SSE4_1") (DI "TARGET_64BIT && TARGET_AVX512VL")])
> +(define_code_attr maxmin_rel
> + [(smax "ge") (smin "le") (umax "geu") (umin "leu")])
> +(define_code_attr maxmin_cmpmode
> + [(smax "CCGC") (smin "CCGC") (umax "CC") (umin "CC")])
> +
> +(define_insn_and_split "<code><mode>3"
> + [(set (match_operand:MAXMIN_IMODE 0 "register_operand")
> + (maxmin:MAXMIN_IMODE (match_operand:MAXMIN_IMODE 1 "register_operand")
> + (match_operand:MAXMIN_IMODE 2 "register_operand")))
> + (clobber (reg:CC FLAGS_REG))]
> + "TARGET_STV && can_create_pseudo_p ()"
> + "#"
> + "&& 1"
> + [(set (reg:<maxmin_cmpmode> FLAGS_REG)
> + (compare:<maxmin_cmpmode> (match_dup 1)(match_dup 2)))
> + (set (match_dup 0)
> + (if_then_else:MAXMIN_IMODE
> + (<maxmin_rel> (reg:<maxmin_cmpmode> FLAGS_REG)(const_int 0))
> + (match_dup 1)
> + (match_dup 2)))])
> +
> ;; Conditional addition patterns
> (define_expand "add<mode>cc"
> [(match_operand:SWI 0 "register_operand")
> Index: gcc/testsuite/gcc.target/i386/pr91154.c
> ===================================================================
> --- gcc/testsuite/gcc.target/i386/pr91154.c (nonexistent)
> +++ gcc/testsuite/gcc.target/i386/pr91154.c (working copy)
> @@ -0,0 +1,20 @@
> +/* { dg-do compile } */
> +/* { dg-options "-O2 -msse4.1 -mstv" } */
> +
> +void foo (int *dc, int *mc, int *tpdd, int *tpmd, int M)
> +{
> + int sc;
> + int k;
> + for (k = 1; k <= M; k++)
> + {
> + dc[k] = dc[k-1] + tpdd[k-1];
> + if ((sc = mc[k-1] + tpmd[k-1]) > dc[k]) dc[k] = sc;
> + if (dc[k] < -987654321) dc[k] = -987654321;
> + }
> +}
> +
> +/* We want to convert the loop to SSE since SSE pmaxsd is faster than
> + compare + conditional move. */
> +/* { dg-final { scan-assembler-not "cmov" } } */
> +/* { dg-final { scan-assembler-times "pmaxsd" 2 } } */
> +/* { dg-final { scan-assembler-times "paddd" 2 } } */
> Index: gcc/testsuite/gcc.target/i386/minmax-3.c
> ===================================================================
> --- gcc/testsuite/gcc.target/i386/minmax-3.c (nonexistent)
> +++ gcc/testsuite/gcc.target/i386/minmax-3.c (working copy)
> @@ -0,0 +1,27 @@
> +/* { dg-do compile } */
> +/* { dg-options "-O2 -mstv" } */
> +
> +#define max(a,b) (((a) > (b))? (a) : (b))
> +#define min(a,b) (((a) < (b))? (a) : (b))
> +
> +int ssi[1024];
> +unsigned int usi[1024];
> +long long sdi[1024];
> +unsigned long long udi[1024];
> +
> +#define CHECK(FN, VARIANT) \
> +void \
> +FN ## VARIANT (void) \
> +{ \
> + for (int i = 1; i < 1024; ++i) \
> + VARIANT[i] = FN(VARIANT[i-1], VARIANT[i]); \
> +}
> +
> +CHECK(max, ssi);
> +CHECK(min, ssi);
> +CHECK(max, usi);
> +CHECK(min, usi);
> +CHECK(max, sdi);
> +CHECK(min, sdi);
> +CHECK(max, udi);
> +CHECK(min, udi);
> Index: gcc/testsuite/gcc.target/i386/minmax-4.c
> ===================================================================
> --- gcc/testsuite/gcc.target/i386/minmax-4.c (nonexistent)
> +++ gcc/testsuite/gcc.target/i386/minmax-4.c (working copy)
> @@ -0,0 +1,9 @@
> +/* { dg-do compile } */
> +/* { dg-options "-O2 -mstv -msse4.1" } */
> +
> +#include "minmax-3.c"
> +
> +/* { dg-final { scan-assembler-times "pmaxsd" 1 } } */
> +/* { dg-final { scan-assembler-times "pmaxud" 1 } } */
> +/* { dg-final { scan-assembler-times "pminsd" 1 } } */
> +/* { dg-final { scan-assembler-times "pminud" 1 } } */
> Index: gcc/testsuite/gcc.target/i386/minmax-5.c
> ===================================================================
> --- gcc/testsuite/gcc.target/i386/minmax-5.c (nonexistent)
> +++ gcc/testsuite/gcc.target/i386/minmax-5.c (working copy)
> @@ -0,0 +1,13 @@
> +/* { dg-do compile } */
> +/* { dg-options "-O2 -mstv -mavx512vl" } */
> +
> +#include "minmax-3.c"
> +
> +/* { dg-final { scan-assembler-times "vpmaxsd" 1 } } */
> +/* { dg-final { scan-assembler-times "vpmaxud" 1 } } */
> +/* { dg-final { scan-assembler-times "vpminsd" 1 } } */
> +/* { dg-final { scan-assembler-times "vpminud" 1 } } */
> +/* { dg-final { scan-assembler-times "vpmaxsq" 1 { target lp64 } } } */
> +/* { dg-final { scan-assembler-times "vpmaxuq" 1 { target lp64 } } } */
> +/* { dg-final { scan-assembler-times "vpminsq" 1 { target lp64 } } } */
> +/* { dg-final { scan-assembler-times "vpminuq" 1 { target lp64 } } } */
- References:
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs
- Re: [PATCH][RFC][x86] Fix PR91154, add SImode smax, allow SImode add in SSE regs