This is the mail archive of the gcc-patches@gcc.gnu.org mailing list for the GCC project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[PATCH v3 06/10] GCN back-end config


[Already approved by Jeff Law.  Included here for completeness, now with
config.sub removed.]

This patch contains the configuration adjustments needed to enable the GCN
back-end.

Since the previous v2 posting, the config.sub patch has be committed to
the upstream GNU config repository.  However, the GCC version will have
to be updated before this config will work.  I presume I can do that as
an "obvious" patch when the time comes? (If nobody else gets there
first.)

The new configure check for dlopen is required to allow building the new
gcn-run tool.  This tool uses libdl to load the HSA runtime libraries, which
are required to run programs on the GPU.  The tool is disabled if libdl is not
available.

2018-12-12  Andrew Stubbs  <ams@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>
	    Jan Hubicka  <hubicka@ucw.cz>
	    Martin Jambor  <mjambor@suse.cz>

	* configure.ac: Likewise.
	* configure: Regenerate.
	* contrib/config-list.mk: Add amdgcn-amdhsa.

	gcc/
	* config.gcc: Add amdgcn*-*-amdhsa configuration.
	* configure.ac: Check for dlopen.
	* configure: Regenerate.
---
 config.sub             |  9 +++++++
 configure              |  2 ++
 configure.ac           |  2 ++
 contrib/config-list.mk |  1 +
 gcc/config.gcc         | 41 ++++++++++++++++++++++++++++++
 gcc/configure          | 68 ++++++++++++++++++++++++++++++++++++++++++++++++--
 gcc/configure.ac       |  8 ++++++
 7 files changed, 129 insertions(+), 2 deletions(-)

diff --git a/configure b/configure
index 4b095de..adf4fda 100755
--- a/configure
+++ b/configure
@@ -3652,6 +3652,8 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
     noconfigdirs="$noconfigdirs sim target-rda"
     ;;
+  amdgcn*-*-*)
+    ;;
   arm-*-darwin*)
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
     noconfigdirs="$noconfigdirs sim target-rda"
diff --git a/configure.ac b/configure.ac
index 0547510..87f2aee 100644
--- a/configure.ac
+++ b/configure.ac
@@ -934,6 +934,8 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
     noconfigdirs="$noconfigdirs sim target-rda"
     ;;
+  amdgcn*-*-*)
+    ;;
   arm-*-darwin*)
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
     noconfigdirs="$noconfigdirs sim target-rda"
diff --git a/contrib/config-list.mk b/contrib/config-list.mk
index cbb9e28b..de0226b 100644
--- a/contrib/config-list.mk
+++ b/contrib/config-list.mk
@@ -33,6 +33,7 @@ GCC_SRC_DIR=../../gcc
 LIST = aarch64-elf aarch64-linux-gnu aarch64-rtems \
   alpha-linux-gnu alpha-netbsd alpha-openbsd \
   alpha64-dec-vms alpha-dec-vms \
+  amdgcn-amdhsa \
   arc-elf32OPT-with-cpu=arc600 arc-elf32OPT-with-cpu=arc700 \
   arc-linux-uclibcOPT-with-cpu=arc700 arceb-linux-uclibcOPT-with-cpu=arc700 \
   arm-wrs-vxworks arm-netbsdelf \
diff --git a/gcc/config.gcc b/gcc/config.gcc
index 3b2a659..deaed71 100644
--- a/gcc/config.gcc
+++ b/gcc/config.gcc
@@ -326,6 +326,10 @@ alpha*-*-*)
 	cpu_type=alpha
 	extra_options="${extra_options} g.opt"
 	;;
+amdgcn*)
+	cpu_type=gcn
+	use_gcc_stdint=wrap
+	;;
 am33_2.0-*-linux*)
 	cpu_type=mn10300
 	;;
@@ -1410,6 +1414,25 @@ ft32-*-elf)
 	tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
 	tmake_file="${tmake_file} ft32/t-ft32"
 	;;
+amdgcn-*-amdhsa)
+	tm_file="elfos.h gcn/gcn-hsa.h gcn/gcn.h newlib-stdint.h"
+	tmake_file="gcn/t-gcn-hsa"
+	native_system_header_dir=/include
+	extra_modes=gcn/gcn-modes.def
+	extra_objs="${extra_objs} gcn-tree.o"
+	extra_gcc_objs="driver-gcn.o"
+	case "$host" in
+	x86_64*-*-linux-gnu )
+		if test "$ac_cv_search_dlopen" != no; then
+			extra_programs="${extra_programs} gcn-run\$(exeext)"
+		fi
+		;;
+	esac
+	if test x$enable_as_accelerator = xyes; then
+		extra_programs="${extra_programs} mkoffload\$(exeext)"
+		tm_file="${tm_file} gcn/offload.h"
+	fi
+	;;
 moxie-*-elf)
 	gas=yes
 	gnu_ld=yes
@@ -4131,6 +4154,24 @@ case "${target}" in
 		esac
 		;;
 
+	amdgcn-*-*)
+		supported_defaults="arch tune"
+
+		for which in arch tune; do
+			eval "val=\$with_$which"
+			case ${val} in
+			"" | carrizo | fiji | gfx900 )
+				# OK
+				;;
+			*)
+				echo "Unknown cpu used in --with-$which=$val." 1>&2
+				exit 1
+				;;
+			esac
+		done
+		[ "x$with_arch" = x ] && with_arch=fiji
+		;;
+
 	hppa*-*-*)
 		supported_defaults="arch schedule"
 
diff --git a/gcc/configure b/gcc/configure
index efbf621..c27bc17 100755
--- a/gcc/configure
+++ b/gcc/configure
@@ -782,6 +782,7 @@ manext
 LIBICONV_DEP
 LTLIBICONV
 LIBICONV
+DL_LIB
 LDEXP_LIB
 EXTRA_GCC_LIBS
 GNAT_LIBEXC
@@ -9726,6 +9727,69 @@ LDEXP_LIB="$LIBS"
 LIBS="$save_LIBS"
 
 
+# Some systems need dlopen
+save_LIBS="$LIBS"
+LIBS=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlopen" >&5
+$as_echo_n "checking for library containing dlopen... " >&6; }
+if ${ac_cv_search_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' dl; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_cxx_try_link "$LINENO"; then :
+  ac_cv_search_dlopen=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_dlopen+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_dlopen+:} false; then :
+
+else
+  ac_cv_search_dlopen=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlopen" >&5
+$as_echo "$ac_cv_search_dlopen" >&6; }
+ac_res=$ac_cv_search_dlopen
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+DL_LIB="$LIBS"
+LIBS="$save_LIBS"
+
+
 # Use <inttypes.h> only if it exists,
 # doesn't clash with <sys/types.h>, declares intmax_t and defines
 # PRId64
@@ -18573,7 +18637,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 18576 "configure"
+#line 18640 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -18679,7 +18743,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 18682 "configure"
+#line 18746 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
diff --git a/gcc/configure.ac b/gcc/configure.ac
index 7fce52a..41d48e9 100644
--- a/gcc/configure.ac
+++ b/gcc/configure.ac
@@ -1228,6 +1228,14 @@ LDEXP_LIB="$LIBS"
 LIBS="$save_LIBS"
 AC_SUBST(LDEXP_LIB)
 
+# Some systems need dlopen
+save_LIBS="$LIBS"
+LIBS=
+AC_SEARCH_LIBS(dlopen, dl)
+DL_LIB="$LIBS"
+LIBS="$save_LIBS"
+AC_SUBST(DL_LIB)
+
 # Use <inttypes.h> only if it exists,
 # doesn't clash with <sys/types.h>, declares intmax_t and defines
 # PRId64

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]