This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
[PATCH v4 01/10] Initial TI PRU GCC port
- From: Dimitar Dimitrov <dimitar at dinux dot eu>
- To: gcc-patches at gcc dot gnu dot org
- Cc: Dimitar Dimitrov <dimitar at dinux dot eu>
- Date: Thu, 6 Sep 2018 14:12:08 +0300
- Subject: [PATCH v4 01/10] Initial TI PRU GCC port
- References: <20180906111217.24365-1-dimitar@dinux.eu>
ChangeLog:
2018-08-29 Dimitar Dimitrov <dimitar@dinux.eu>
* configure: Regenerate.
* configure.ac: Add PRU target.
gcc/ChangeLog:
2018-08-29 Dimitar Dimitrov <dimitar@dinux.eu>
* common/config/pru/pru-common.c: New file.
* config.gcc: Add PRU target.
* config/pru/alu-zext.md: New file.
* config/pru/constraints.md: New file.
* config/pru/predicates.md: New file.
* config/pru/pru-opts.h: New file.
* config/pru/pru-passes.c: New file.
* config/pru/pru-pragma.c: New file.
* config/pru/pru-protos.h: New file.
* config/pru/pru.c: New file.
* config/pru/pru.h: New file.
* config/pru/pru.md: New file.
* config/pru/pru.opt: New file.
* config/pru/t-pru: New file.
* doc/extend.texi: Document PRU pragmas.
* doc/invoke.texi: Document PRU-specific options.
* doc/md.texi: Document PRU asm constraints.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
---
configure.ac | 7 +
gcc/common/config/pru/pru-common.c | 36 +
gcc/config.gcc | 9 +
gcc/config/pru/alu-zext.md | 178 +++
gcc/config/pru/constraints.md | 88 ++
gcc/config/pru/predicates.md | 224 +++
gcc/config/pru/pru-opts.h | 31 +
gcc/config/pru/pru-passes.c | 234 +++
gcc/config/pru/pru-pragma.c | 90 ++
gcc/config/pru/pru-protos.h | 72 +
gcc/config/pru/pru.c | 3008 ++++++++++++++++++++++++++++++++++++
gcc/config/pru/pru.h | 551 +++++++
gcc/config/pru/pru.md | 946 ++++++++++++
gcc/config/pru/pru.opt | 53 +
gcc/config/pru/t-pru | 31 +
gcc/doc/extend.texi | 21 +
gcc/doc/invoke.texi | 55 +
gcc/doc/md.texi | 22 +
18 files changed, 5656 insertions(+)
create mode 100644 gcc/common/config/pru/pru-common.c
create mode 100644 gcc/config/pru/alu-zext.md
create mode 100644 gcc/config/pru/constraints.md
create mode 100644 gcc/config/pru/predicates.md
create mode 100644 gcc/config/pru/pru-opts.h
create mode 100644 gcc/config/pru/pru-passes.c
create mode 100644 gcc/config/pru/pru-pragma.c
create mode 100644 gcc/config/pru/pru-protos.h
create mode 100644 gcc/config/pru/pru.c
create mode 100644 gcc/config/pru/pru.h
create mode 100644 gcc/config/pru/pru.md
create mode 100644 gcc/config/pru/pru.opt
create mode 100644 gcc/config/pru/t-pru
diff --git a/configure.ac b/configure.ac
index a0b0917dd55..11c9f72fc64 100644
--- a/configure.ac
+++ b/configure.ac
@@ -640,6 +640,10 @@ case "${target}" in
powerpc-*-aix* | rs6000-*-aix*)
noconfigdirs="$noconfigdirs target-libssp"
;;
+ pru-*-*)
+ # No hosted I/O support.
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
rl78-*-*)
# libssp uses a misaligned load to trigger a fault, but the RL78
# doesn't fault for those - instead, it gives a build-time error
@@ -824,6 +828,9 @@ case "${target}" in
powerpc*-*-*)
libgloss_dir=rs6000
;;
+ pru-*-*)
+ libgloss_dir=pru
+ ;;
sparc*-*-*)
libgloss_dir=sparc
;;
diff --git a/gcc/common/config/pru/pru-common.c b/gcc/common/config/pru/pru-common.c
new file mode 100644
index 00000000000..e87d70ce9ca
--- /dev/null
+++ b/gcc/common/config/pru/pru-common.c
@@ -0,0 +1,36 @@
+/* Common hooks for TI PRU
+ Copyright (C) 2014-2018 Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3, or (at your option)
+any later version.
+
+GCC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
+
+#include "config.h"
+#include "system.h"
+#include "coretypes.h"
+#include "diagnostic-core.h"
+#include "tm.h"
+#include "common/common-target.h"
+#include "common/common-target-def.h"
+#include "opts.h"
+#include "flags.h"
+
+#undef TARGET_DEFAULT_TARGET_FLAGS
+#define TARGET_DEFAULT_TARGET_FLAGS (MASK_OPT_LOOP)
+
+#undef TARGET_EXCEPT_UNWIND_INFO
+#define TARGET_EXCEPT_UNWIND_INFO sjlj_except_unwind_info
+
+struct gcc_targetm_common targetm_common = TARGETM_COMMON_INITIALIZER;
diff --git a/gcc/config.gcc b/gcc/config.gcc
index 6ad2ba4d152..66b31f320e1 100644
--- a/gcc/config.gcc
+++ b/gcc/config.gcc
@@ -493,6 +493,9 @@ powerpc*-*-*)
esac
extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
;;
+pru-*-*)
+ cpu_type=pru
+ ;;
riscv*)
cpu_type=riscv
extra_objs="riscv-builtins.o riscv-c.o"
@@ -2699,6 +2702,12 @@ powerpcle-*-eabi*)
extra_options="${extra_options} rs6000/sysv4.opt"
use_gcc_stdint=wrap
;;
+pru*-*-*)
+ tm_file="elfos.h newlib-stdint.h ${tm_file}"
+ tmake_file="${tmake_file} pru/t-pru"
+ extra_objs="pru-pragma.o pru-passes.o"
+ use_gcc_stdint=wrap
+ ;;
rs6000-ibm-aix6.* | powerpc-ibm-aix6.*)
tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h"
tmake_file="rs6000/t-aix52 t-slibgcc"
diff --git a/gcc/config/pru/alu-zext.md b/gcc/config/pru/alu-zext.md
new file mode 100644
index 00000000000..2112b08d3f4
--- /dev/null
+++ b/gcc/config/pru/alu-zext.md
@@ -0,0 +1,178 @@
+;; ALU operations with zero extensions
+;;
+;; Copyright (C) 2015-2018 Free Software Foundation, Inc.
+;; Contributed by Dimitar Dimitrov <dimitar@dinux.eu>
+;;
+;; This file is part of GCC.
+;;
+;; GCC is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 3, or (at your option)
+;; any later version.
+;;
+;; GCC is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+;; GNU General Public License for more details.
+;;
+;; You should have received a copy of the GNU General Public License
+;; along with GCC; see the file COPYING3. If not see
+;; <http://www.gnu.org/licenses/>.
+
+(define_subst_attr "alu2_zext" "alu2_zext_subst" "_z" "_noz")
+
+(define_subst_attr "alu3_zext_op1" "alu3_zext_op1_subst" "_z1" "_noz1")
+(define_subst_attr "alu3_zext_op2" "alu3_zext_op2_subst" "_z2" "_noz2")
+(define_subst_attr "alu3_zext" "alu3_zext_subst" "_z" "_noz")
+
+(define_subst_attr "bitalu_zext" "bitalu_zext_subst" "_z" "_noz")
+
+(define_code_iterator ALUOP3 [plus minus and ior xor umin umax ashift lshiftrt])
+(define_code_iterator ALUOP2 [neg not])
+
+;; Arithmetic Operations
+
+(define_insn "add_impl<EQD:mode><EQS0:mode><EQS1:mode>_<alu3_zext><alu3_zext_op1><alu3_zext_op2>"
+ [(set (match_operand:EQD 0 "register_operand" "=r,r,r")
+ (plus:EQD
+ (zero_extend:EQD
+ (match_operand:EQS0 1 "register_operand" "%r,r,r"))
+ (zero_extend:EQD
+ (match_operand:EQS1 2 "nonmemory_operand" "r,I,M"))))]
+ ""
+ "@
+ add\\t%0, %1, %2
+ add\\t%0, %1, %2
+ sub\\t%0, %1, %n2"
+ [(set_attr "type" "alu")
+ (set_attr "length" "4")])
+
+(define_insn "sub_impl<EQD:mode><EQS0:mode><EQS1:mode>_<alu3_zext><alu3_zext_op1><alu3_zext_op2>"
+ [(set (match_operand:EQD 0 "register_operand" "=r,r,r")
+ (minus:EQD
+ (zero_extend:EQD
+ (match_operand:EQS0 1 "reg_or_ubyte_operand" "r,r,I"))
+ (zero_extend:EQD
+ (match_operand:EQS1 2 "reg_or_ubyte_operand" "r,I,r"))))]
+ ""
+ "@
+ sub\\t%0, %1, %2
+ sub\\t%0, %1, %2
+ rsb\\t%0, %2, %1"
+ [(set_attr "type" "alu")
+ (set_attr "length" "4")])
+
+
+(define_insn "neg_impl<EQD:mode><EQS0:mode>_<alu2_zext>"
+ [(set (match_operand:EQD 0 "register_operand" "=r")
+ (neg:EQD
+ (zero_extend:EQD (match_operand:EQS0 1 "register_operand" "r"))))]
+ ""
+ "rsb\\t%0, %1, 0"
+ [(set_attr "type" "alu")
+ (set_attr "length" "4")])
+
+
+(define_insn "one_impl<EQD:mode><EQS0:mode>_<alu2_zext>"
+ [(set (match_operand:EQD 0 "register_operand" "=r")
+ (not:EQD
+ (zero_extend:EQD (match_operand:EQS0 1 "register_operand" "r"))))]
+ ""
+ "not\\t%0, %1"
+ [(set_attr "type" "alu")
+ (set_attr "length" "4")])
+
+; Specialized IOR/AND patterns for matching setbit/clearbit instructions.
+;
+; TODO - allow clrbit and setbit to support (1 << REG) constructs
+
+(define_insn "clearbit_<EQD:mode><EQS0:mode>_<bitalu_zext>"
+ [(set (match_operand:EQD 0 "register_operand" "=r")
+ (and:EQD
+ (zero_extend:EQD
+ (match_operand:EQS0 1 "register_operand" "r"))
+ (match_operand:EQD 2 "single_zero_operand" "n")))]
+ ""
+ "clr\\t%0, %1, %V2"
+ [(set_attr "type" "alu")
+ (set_attr "length" "4")])
+
+(define_insn "setbit_<EQD:mode><EQS0:mode>_<bitalu_zext>"
+ [(set (match_operand:EQD 0 "register_operand" "=r")
+ (ior:EQD
+ (zero_extend:EQD
+ (match_operand:EQS0 1 "register_operand" "r"))
+ (match_operand:EQD 2 "single_one_operand" "n")))]
+ ""
+ "set\\t%0, %1, %T2"
+ [(set_attr "type" "alu")
+ (set_attr "length" "4")])
+
+; Regular ALU ops
+(define_insn "<code>_impl<EQD:mode><EQS0:mode><EQS1:mode>_<alu3_zext><alu3_zext_op1><alu3_zext_op2>"
+ [(set (match_operand:EQD 0 "register_operand" "=r")
+ (LOGICAL:EQD
+ (zero_extend:EQD
+ (match_operand:EQS0 1 "register_operand" "%r"))
+ (zero_extend:EQD
+ (match_operand:EQS1 2 "reg_or_ubyte_operand" "rI"))))]
+ ""
+ "<logical_asm>\\t%0, %1, %2"
+ [(set_attr "type" "alu")
+ (set_attr "length" "4")])
+
+; Shift ALU ops
+(define_insn "<shift_op>_impl<EQD:mode><EQS0:mode><EQS1:mode>_<alu3_zext><alu3_zext_op1><alu3_zext_op2>"
+ [(set (match_operand:EQD 0 "register_operand" "=r")
+ (SHIFT:EQD
+ (zero_extend:EQD (match_operand:EQS0 1 "register_operand" "r"))
+ (zero_extend:EQD (match_operand:EQS1 2 "shift_operand" "rL"))))]
+ ""
+ "<shift_asm>\\t%0, %1, %2"
+ [(set_attr "type" "alu")
+ (set_attr "length" "4")])
+
+;; Substitutions
+
+(define_subst "alu2_zext_subst"
+ [(set (match_operand:EQD 0 "" "")
+ (ALUOP2:EQD (zero_extend:EQD (match_operand:EQD 1 "" ""))))]
+ ""
+ [(set (match_dup 0)
+ (ALUOP2:EQD (match_dup 1)))])
+
+(define_subst "bitalu_zext_subst"
+ [(set (match_operand:EQD 0 "" "")
+ (ALUOP3:EQD (zero_extend:EQD (match_operand:EQD 1 "" ""))
+ (match_operand:EQD 2 "" "")))]
+ ""
+ [(set (match_dup 0)
+ (ALUOP3:EQD (match_dup 1)
+ (match_dup 2)))])
+
+(define_subst "alu3_zext_subst"
+ [(set (match_operand:EQD 0 "" "")
+ (ALUOP3:EQD (zero_extend:EQD (match_operand:EQD 1 "" ""))
+ (zero_extend:EQD (match_operand:EQD 2 "" ""))))]
+ ""
+ [(set (match_dup 0)
+ (ALUOP3:EQD (match_dup 1)
+ (match_dup 2)))])
+
+(define_subst "alu3_zext_op1_subst"
+ [(set (match_operand:EQD 0 "" "")
+ (ALUOP3:EQD (zero_extend:EQD (match_operand:EQD 1 "" ""))
+ (zero_extend:EQD (match_operand:EQS1 2 "" ""))))]
+ ""
+ [(set (match_dup 0)
+ (ALUOP3:EQD (match_dup 1)
+ (zero_extend:EQD (match_dup 2))))])
+
+(define_subst "alu3_zext_op2_subst"
+ [(set (match_operand:EQD 0 "" "")
+ (ALUOP3:EQD (zero_extend:EQD (match_operand:EQS0 1 "" ""))
+ (zero_extend:EQD (match_operand:EQD 2 "" ""))))]
+ ""
+ [(set (match_dup 0)
+ (ALUOP3:EQD (zero_extend:EQD (match_dup 1))
+ (match_dup 2)))])
diff --git a/gcc/config/pru/constraints.md b/gcc/config/pru/constraints.md
new file mode 100644
index 00000000000..326c8e9907c
--- /dev/null
+++ b/gcc/config/pru/constraints.md
@@ -0,0 +1,88 @@
+;; Constraint definitions for TI PRU.
+;; Copyright (C) 2014-2018 Free Software Foundation, Inc.
+;; Contributed by Dimitar Dimitrov <dimitar@dinux.eu>
+;;
+;; This file is part of GCC.
+;;
+;; GCC is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 3, or (at your option)
+;; any later version.
+;;
+;; GCC is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+;; GNU General Public License for more details.
+;;
+;; You should have received a copy of the GNU General Public License
+;; along with GCC; see the file COPYING3. If not see
+;; <http://www.gnu.org/licenses/>.
+
+;; We use the following constraint letters for constants:
+;;
+;; I: 0 to 255.
+;; J: 0 to 65535.
+;; L: 0 to 31 (for shift counts).
+;; M: -255 to 0 (for converting ADD to SUB with suitable UBYTE OP2).
+;; N: -32768 to 32767 (16-bit signed integer)
+;; P: 1
+;; T: Text segment label. Needed to know when to select %pmem relocation.
+;; Z: Constant integer zero.
+;;
+;; We use the following built-in register classes:
+;;
+;; r: general purpose register (r0..r31)
+;; m: memory operand
+;;
+;; The following constraints are intended for internal use only:
+;; j: jump address register suitable for sibling calls
+;; l: the internal counter register used by LOOP instructions
+
+;; Register constraints.
+
+(define_register_constraint "j" "SIB_REGS"
+ "A register suitable for an indirect sibcall.")
+
+(define_register_constraint "l" "LOOPCNTR_REGS"
+ "The internal counter register used by the LOOP instruction.")
+
+;; Integer constraints.
+
+(define_constraint "I"
+ "An unsigned 8-bit constant."
+ (and (match_code "const_int")
+ (match_test "UBYTE_INT (ival)")))
+
+(define_constraint "J"
+ "An unsigned 16-bit constant."
+ (and (match_code "const_int")
+ (match_test "UHWORD_INT (ival)")))
+
+(define_constraint "L"
+ "An unsigned 5-bit constant (for shift counts)."
+ (and (match_code "const_int")
+ (match_test "ival >= 0 && ival <= 31")))
+
+(define_constraint "M"
+ "A constant in the range [-255;0]."
+ (and (match_code "const_int")
+ (match_test "UBYTE_INT (-ival)")))
+
+(define_constraint "N"
+ "A constant in the range [-32768;32767]."
+ (and (match_code "const_int")
+ (match_test "SHWORD_INT (ival)")))
+
+(define_constraint "P"
+ "A constant 1."
+ (and (match_code "const_int")
+ (match_test "ival == 1")))
+
+(define_constraint "T"
+ "A text segment (program memory) constant label."
+ (match_test "text_segment_operand (op, VOIDmode)"))
+
+(define_constraint "Z"
+ "An integer constant zero."
+ (and (match_code "const_int")
+ (match_test "ival == 0")))
diff --git a/gcc/config/pru/predicates.md b/gcc/config/pru/predicates.md
new file mode 100644
index 00000000000..78fdb8a25b7
--- /dev/null
+++ b/gcc/config/pru/predicates.md
@@ -0,0 +1,224 @@
+;; Predicate definitions for TI PRU.
+;; Copyright (C) 2014-2018 Free Software Foundation, Inc.
+;; Contributed by Dimitar Dimitrov <dimitar@dinux.eu>
+;;
+;; This file is part of GCC.
+;;
+;; GCC is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 3, or (at your option)
+;; any later version.
+;;
+;; GCC is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+;; GNU General Public License for more details.
+;;
+;; You should have received a copy of the GNU General Public License
+;; along with GCC; see the file COPYING3. If not see
+;; <http://www.gnu.org/licenses/>.
+
+(define_predicate "const_1_operand"
+ (and (match_code "const_int")
+ (match_test "IN_RANGE (INTVAL (op), 1, 1)")))
+
+(define_predicate "const_ubyte_operand"
+ (and (match_code "const_int")
+ (match_test "IN_RANGE (INTVAL (op), 0, 0xff)")))
+
+(define_predicate "const_uhword_operand"
+ (and (match_code "const_int")
+ (match_test "IN_RANGE (INTVAL (op), 0, 0xffff)")))
+
+; TRUE for comparisons we support.
+(define_predicate "pru_cmp_operator"
+ (match_code "eq,ne,leu,ltu,geu,gtu"))
+
+; TRUE for signed comparisons that need special handling for PRU.
+(define_predicate "pru_signed_cmp_operator"
+ (match_code "ge,gt,le,lt"))
+
+;; FP Comparisons handled by pru_expand_pru_compare.
+(define_predicate "pru_fp_comparison_operator"
+ (match_code "eq,lt,gt,le,ge"))
+
+;; Return true if OP is a constant that contains only one 1 in its
+;; binary representation.
+(define_predicate "single_one_operand"
+ (and (match_code "const_int")
+ (match_test "exact_log2 (INTVAL (op) & GET_MODE_MASK (mode)) >= 0")))
+
+;; Return true if OP is a constant that contains only one 0 in its
+;; binary representation.
+(define_predicate "single_zero_operand"
+ (and (match_code "const_int")
+ (match_test "exact_log2 (~INTVAL (op) & GET_MODE_MASK (mode)) >= 0")))
+
+
+(define_predicate "reg_or_ubyte_operand"
+ (ior (match_operand 0 "const_ubyte_operand")
+ (match_operand 0 "register_operand")))
+
+(define_predicate "reg_or_const_1_operand"
+ (ior (match_operand 0 "const_1_operand")
+ (match_operand 0 "register_operand")))
+
+(define_predicate "const_shift_operand"
+ (and (match_code "const_int")
+ (match_test "SHIFT_INT (INTVAL (op))")))
+
+(define_predicate "shift_operand"
+ (ior (match_operand 0 "const_shift_operand")
+ (match_operand 0 "register_operand")))
+
+(define_predicate "ctable_addr_operand"
+ (and (match_code "const_int")
+ (match_test ("(pru_get_ctable_base_index (INTVAL (op)) >= 0)"))))
+
+(define_predicate "ctable_base_operand"
+ (and (match_code "const_int")
+ (match_test ("(pru_get_ctable_exact_base_index (INTVAL (op)) >= 0)"))))
+
+;; Ideally we should enforce a restriction to all text labels to fit in
+;; 16bits, as required by the PRU ISA. But for the time being we'll rely on
+;; binutils to catch text segment overflows.
+(define_predicate "call_operand"
+ (ior (match_operand 0 "immediate_operand")
+ (match_operand 0 "register_operand")))
+
+;; Return true if OP is a text segment reference.
+;; This is needed for program memory address expressions. Borrowed from AVR.
+(define_predicate "text_segment_operand"
+ (match_code "code_label,label_ref,symbol_ref,plus,minus,const")
+{
+ switch (GET_CODE (op))
+ {
+ case CODE_LABEL:
+ return true;
+ case LABEL_REF :
+ return true;
+ case SYMBOL_REF :
+ return SYMBOL_REF_FUNCTION_P (op);
+ case PLUS :
+ case MINUS :
+ /* Assume canonical format of symbol + constant.
+ Fall through. */
+ case CONST :
+ return text_segment_operand (XEXP (op, 0), VOIDmode);
+ default :
+ return false;
+ }
+})
+
+;; Return true if OP is a load multiple operation. It is known to be a
+;; PARALLEL and the first section will be tested.
+
+(define_special_predicate "load_multiple_operation"
+ (match_code "parallel")
+{
+ machine_mode elt_mode;
+ int count = XVECLEN (op, 0);
+ unsigned int dest_regno;
+ rtx src_addr;
+ int i, off;
+
+ /* Perform a quick check so we don't blow up below. */
+ if (GET_CODE (XVECEXP (op, 0, 0)) != SET
+ || GET_CODE (SET_DEST (XVECEXP (op, 0, 0))) != REG
+ || GET_CODE (SET_SRC (XVECEXP (op, 0, 0))) != MEM)
+ return false;
+
+ dest_regno = REGNO (SET_DEST (XVECEXP (op, 0, 0)));
+ src_addr = XEXP (SET_SRC (XVECEXP (op, 0, 0)), 0);
+ elt_mode = GET_MODE (SET_DEST (XVECEXP (op, 0, 0)));
+
+ /* Check, is base, or base + displacement. */
+
+ if (GET_CODE (src_addr) == REG)
+ off = 0;
+ else if (GET_CODE (src_addr) == PLUS
+ && GET_CODE (XEXP (src_addr, 0)) == REG
+ && GET_CODE (XEXP (src_addr, 1)) == CONST_INT)
+ {
+ off = INTVAL (XEXP (src_addr, 1));
+ src_addr = XEXP (src_addr, 0);
+ }
+ else
+ return false;
+
+ for (i = 1; i < count; i++)
+ {
+ rtx elt = XVECEXP (op, 0, i);
+
+ if (GET_CODE (elt) != SET
+ || GET_CODE (SET_DEST (elt)) != REG
+ || GET_MODE (SET_DEST (elt)) != elt_mode
+ || REGNO (SET_DEST (elt)) != dest_regno + i
+ || GET_CODE (SET_SRC (elt)) != MEM
+ || GET_MODE (SET_SRC (elt)) != elt_mode
+ || GET_CODE (XEXP (SET_SRC (elt), 0)) != PLUS
+ || ! rtx_equal_p (XEXP (XEXP (SET_SRC (elt), 0), 0), src_addr)
+ || GET_CODE (XEXP (XEXP (SET_SRC (elt), 0), 1)) != CONST_INT
+ || INTVAL (XEXP (XEXP (SET_SRC (elt), 0), 1))
+ != off + i * GET_MODE_SIZE (elt_mode))
+ return false;
+ }
+
+ return true;
+})
+
+;; Return true if OP is a store multiple operation. It is known to be a
+;; PARALLEL and the first section will be tested.
+
+(define_special_predicate "store_multiple_operation"
+ (match_code "parallel")
+{
+ machine_mode elt_mode;
+ int count = XVECLEN (op, 0);
+ unsigned int src_regno;
+ rtx dest_addr;
+ int i, off;
+
+ /* Perform a quick check so we don't blow up below. */
+ if (GET_CODE (XVECEXP (op, 0, 0)) != SET
+ || GET_CODE (SET_DEST (XVECEXP (op, 0, 0))) != MEM
+ || GET_CODE (SET_SRC (XVECEXP (op, 0, 0))) != REG)
+ return false;
+
+ src_regno = REGNO (SET_SRC (XVECEXP (op, 0, 0)));
+ dest_addr = XEXP (SET_DEST (XVECEXP (op, 0, 0)), 0);
+ elt_mode = GET_MODE (SET_SRC (XVECEXP (op, 0, 0)));
+
+ /* Check, is base, or base + displacement. */
+
+ if (GET_CODE (dest_addr) == REG)
+ off = 0;
+ else if (GET_CODE (dest_addr) == PLUS
+ && GET_CODE (XEXP (dest_addr, 0)) == REG
+ && GET_CODE (XEXP (dest_addr, 1)) == CONST_INT)
+ {
+ off = INTVAL (XEXP (dest_addr, 1));
+ dest_addr = XEXP (dest_addr, 0);
+ }
+ else
+ return false;
+
+ for (i = 1; i < count; i++)
+ {
+ rtx elt = XVECEXP (op, 0, i);
+
+ if (GET_CODE (elt) != SET
+ || GET_CODE (SET_SRC (elt)) != REG
+ || GET_MODE (SET_SRC (elt)) != elt_mode
+ || REGNO (SET_SRC (elt)) != src_regno + i
+ || GET_CODE (SET_DEST (elt)) != MEM
+ || GET_MODE (SET_DEST (elt)) != elt_mode
+ || GET_CODE (XEXP (SET_DEST (elt), 0)) != PLUS
+ || ! rtx_equal_p (XEXP (XEXP (SET_DEST (elt), 0), 0), dest_addr)
+ || GET_CODE (XEXP (XEXP (SET_DEST (elt), 0), 1)) != CONST_INT
+ || INTVAL (XEXP (XEXP (SET_DEST (elt), 0), 1))
+ != off + i * GET_MODE_SIZE (elt_mode))
+ return false;
+ }
+ return true;
+})
diff --git a/gcc/config/pru/pru-opts.h b/gcc/config/pru/pru-opts.h
new file mode 100644
index 00000000000..1c1514cb2a3
--- /dev/null
+++ b/gcc/config/pru/pru-opts.h
@@ -0,0 +1,31 @@
+/* Copyright (C) 2017-2018 Free Software Foundation, Inc.
+ Contributed by Dimitar Dimitrov <dimitar@dinux.eu>
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+/* Definitions for option handling for PRU. */
+
+#ifndef GCC_PRU_OPTS_H
+#define GCC_PRU_OPTS_H
+
+/* ABI variant for code generation. */
+enum pru_abi {
+ PRU_ABI_GNU,
+ PRU_ABI_TI
+};
+
+#endif
diff --git a/gcc/config/pru/pru-passes.c b/gcc/config/pru/pru-passes.c
new file mode 100644
index 00000000000..c95dc877722
--- /dev/null
+++ b/gcc/config/pru/pru-passes.c
@@ -0,0 +1,234 @@
+/* PRU target specific passes
+ Copyright (C) 2017-2018 Free Software Foundation, Inc.
+ Dimitar Dimitrov <dimitar@dinux.eu>
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+#define IN_TARGET_CODE 1
+
+#include "config.h"
+#include "system.h"
+#include "coretypes.h"
+#include "backend.h"
+#include "context.h"
+#include "tm.h"
+#include "alias.h"
+#include "symtab.h"
+#include "tree.h"
+#include "diagnostic-core.h"
+#include "function.h"
+#include "gimple.h"
+#include "gimple-iterator.h"
+#include "gimple-walk.h"
+#include "gimple-expr.h"
+#include "tree-pass.h"
+#include "gimple-pretty-print.h"
+
+#include "pru-protos.h"
+
+namespace {
+
+/* Scan the tree to ensure that the compiled code by GCC
+ conforms to the TI ABI specification. If GCC cannot
+ output a conforming code, raise an error. */
+const pass_data pass_data_tiabi_check =
+{
+ GIMPLE_PASS, /* type */
+ "*tiabi_check", /* name */
+ OPTGROUP_NONE, /* optinfo_flags */
+ TV_NONE, /* tv_id */
+ PROP_gimple_any, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ 0, /* todo_flags_finish */
+};
+
+/* Implementation class for the TI ABI compliance-check pass. */
+class pass_tiabi_check : public gimple_opt_pass
+{
+public:
+ pass_tiabi_check (gcc::context *ctxt)
+ : gimple_opt_pass (pass_data_tiabi_check, ctxt)
+ {}
+
+ /* opt_pass methods: */
+ virtual unsigned int execute (function *);
+
+ virtual bool gate (function *fun ATTRIBUTE_UNUSED)
+ {
+ return pru_current_abi == PRU_ABI_TI;
+ }
+
+}; // class pass_tiabi_check
+
+/* Return 1 if type TYPE is a pointer to function type or a
+ structure having a pointer to function type as one of its fields.
+ Otherwise return 0. */
+static bool
+chkp_type_has_function_pointer (const_tree type)
+{
+ bool res = false;
+
+ if (POINTER_TYPE_P (type) && FUNC_OR_METHOD_TYPE_P (TREE_TYPE (type)))
+ res = true;
+ else if (RECORD_OR_UNION_TYPE_P (type))
+ {
+ tree field;
+
+ for (field = TYPE_FIELDS (type); field; field = DECL_CHAIN (field))
+ if (TREE_CODE (field) == FIELD_DECL)
+ res = res || chkp_type_has_function_pointer (TREE_TYPE (field));
+ }
+ else if (TREE_CODE (type) == ARRAY_TYPE)
+ res = chkp_type_has_function_pointer (TREE_TYPE (type));
+
+ return res;
+}
+
+/* Check the function declaration FNTYPE for TI ABI compatibility. */
+static void
+chk_function_decl (const_tree fntype, location_t call_location)
+{
+ /* GCC does not check if the RETURN VALUE pointer is NULL,
+ so do not allow GCC functions with large return values. */
+ if (!VOID_TYPE_P (TREE_TYPE (fntype))
+ && pru_return_in_memory (TREE_TYPE (fntype), fntype))
+ error_at (call_location,
+ "large return values not supported with %<-mabi=ti%> option");
+
+ /* Check this function's arguments. */
+ for (tree p = TYPE_ARG_TYPES (fntype); p; p = TREE_CHAIN (p))
+ {
+ tree arg_type = TREE_VALUE (p);
+ if (chkp_type_has_function_pointer (arg_type))
+ {
+ error_at (call_location,
+ "function pointers not supported with %<-mabi=ti%> option");
+ }
+ }
+}
+
+/* Callback for walk_gimple_seq that checks TP tree for TI ABI compliance. */
+static tree
+check_op_callback (tree *tp, int *walk_subtrees, void *data)
+{
+ struct walk_stmt_info *wi = (struct walk_stmt_info *) data;
+
+ if (RECORD_OR_UNION_TYPE_P (*tp) || TREE_CODE (*tp) == ENUMERAL_TYPE)
+ {
+ /* Forward declarations have NULL tree type. Skip them. */
+ if (TREE_TYPE (*tp) == NULL)
+ return NULL;
+ }
+
+ /* TODO - why C++ leaves INTEGER_TYPE forward declarations around? */
+ if (TREE_TYPE (*tp) == NULL)
+ return NULL;
+
+ const tree type = TREE_TYPE (*tp);
+
+ /* Direct function calls are allowed, obviously. */
+ if (TREE_CODE (*tp) == ADDR_EXPR && TREE_CODE (type) == POINTER_TYPE)
+ {
+ const tree ptype = TREE_TYPE (type);
+ if (TREE_CODE (ptype) == FUNCTION_TYPE)
+ return NULL;
+ }
+
+ switch (TREE_CODE (type))
+ {
+ case FUNCTION_TYPE:
+ case METHOD_TYPE:
+ {
+ /* Note: Do not enforce a small return value. It is safe to
+ call any TI ABI function from GCC, since GCC will
+ never pass NULL. */
+
+ /* Check arguments for function pointers. */
+ for (tree p = TYPE_ARG_TYPES (type); p; p = TREE_CHAIN (p))
+ {
+ tree arg_type = TREE_VALUE (p);
+ if (chkp_type_has_function_pointer (arg_type))
+ {
+ error_at (gimple_location (wi->stmt), "function pointers "
+ "not supported with %<-mabi=ti%> option");
+ }
+ }
+ break;
+ }
+ case RECORD_TYPE:
+ case UNION_TYPE:
+ case QUAL_UNION_TYPE:
+ case POINTER_TYPE:
+ {
+ if (chkp_type_has_function_pointer (type))
+ {
+ error_at (gimple_location (wi->stmt),
+ "function pointers not supported with "
+ "%<-mabi=ti%> option");
+ *walk_subtrees = false;
+ }
+ break;
+ }
+ default:
+ break;
+ }
+ return NULL;
+}
+
+/* Pass implementation. */
+unsigned
+pass_tiabi_check::execute (function *fun)
+{
+ struct walk_stmt_info wi;
+ const_tree fntype = TREE_TYPE (fun->decl);
+
+ gimple_seq body = gimple_body (current_function_decl);
+
+ memset (&wi, 0, sizeof (wi));
+ wi.info = NULL;
+ wi.want_locations = true;
+
+ /* Check the function body. */
+ walk_gimple_seq (body, NULL, check_op_callback, &wi);
+
+ /* Check the function declaration. */
+ chk_function_decl (fntype, fun->function_start_locus);
+
+ return 0;
+}
+
+} // anon namespace
+
+gimple_opt_pass *
+make_pass_tiabi_check (gcc::context *ctxt)
+{
+ return new pass_tiabi_check (ctxt);
+}
+
+/* Register as early as possible. */
+void
+pru_register_abicheck_pass (void)
+{
+ opt_pass *tiabi_check = make_pass_tiabi_check (g);
+ struct register_pass_info tiabi_check_info
+ = { tiabi_check, "*warn_unused_result",
+ 1, PASS_POS_INSERT_AFTER
+ };
+ register_pass (&tiabi_check_info);
+}
diff --git a/gcc/config/pru/pru-pragma.c b/gcc/config/pru/pru-pragma.c
new file mode 100644
index 00000000000..11cb5bd625c
--- /dev/null
+++ b/gcc/config/pru/pru-pragma.c
@@ -0,0 +1,90 @@
+/* PRU target specific pragmas
+ Copyright (C) 2015-2018 Free Software Foundation, Inc.
+ Contributed by Dimitar Dimitrov <dimitar@dinux.eu>
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+#define IN_TARGET_CODE 1
+
+#include "config.h"
+#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
+#include "alias.h"
+#include "symtab.h"
+#include "tree.h"
+#include "c-family/c-pragma.h"
+#include "c-family/c-common.h"
+#include "diagnostic-core.h"
+#include "cpplib.h"
+#include "pru-protos.h"
+
+
+/* Implements the "pragma CTABLE_ENTRY" pragma. This pragma takes a
+ CTABLE index and an address, and instructs the compiler that
+ LBCO/SBCO can be used on that base address.
+
+ WARNING: Only immediate constant addresses are currently supported. */
+static void
+pru_pragma_ctable_entry (cpp_reader * reader ATTRIBUTE_UNUSED)
+{
+ tree ctable_index, base_addr;
+ enum cpp_ttype type;
+
+ type = pragma_lex (&ctable_index);
+ if (type == CPP_NUMBER)
+ {
+ type = pragma_lex (&base_addr);
+ if (type == CPP_NUMBER)
+ {
+ unsigned int i = tree_to_uhwi (ctable_index);
+ unsigned HOST_WIDE_INT base = tree_to_uhwi (base_addr);
+
+ type = pragma_lex (&base_addr);
+ if (type != CPP_EOF)
+ {
+ error ("junk at end of %<#pragma CTABLE_ENTRY%>");
+ }
+ else if (i >= ARRAY_SIZE (pru_ctable))
+ {
+ error ("%<CTABLE_ENTRY%> index %d is not valid", i);
+ }
+ else if (pru_ctable[i].valid && pru_ctable[i].base != base)
+ {
+ error ("redefinition of %<CTABLE_ENTRY %d%>", i);
+ }
+ else
+ {
+ if (base & 0xff)
+ warning (0, "%<CTABLE_ENTRY%> base address is not "
+ "a multiple of 256");
+ pru_ctable[i].base = base;
+ pru_ctable[i].valid = true;
+ }
+ return;
+ }
+ }
+ error ("malformed %<#pragma CTABLE_ENTRY%> variable address");
+}
+
+/* Implements REGISTER_TARGET_PRAGMAS. */
+void
+pru_register_pragmas (void)
+{
+ c_register_pragma (NULL, "ctable_entry", pru_pragma_ctable_entry);
+ c_register_pragma (NULL, "CTABLE_ENTRY", pru_pragma_ctable_entry);
+}
diff --git a/gcc/config/pru/pru-protos.h b/gcc/config/pru/pru-protos.h
new file mode 100644
index 00000000000..73ab76e076c
--- /dev/null
+++ b/gcc/config/pru/pru-protos.h
@@ -0,0 +1,72 @@
+/* Subroutine declarations for TI PRU target support.
+ Copyright (C) 2014-2018 Free Software Foundation, Inc.
+ Contributed by Dimitar Dimitrov <dimitar@dinux.eu>
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+#ifndef GCC_PRU_PROTOS_H
+#define GCC_PRU_PROTOS_H
+
+struct pru_ctable_entry {
+ bool valid;
+ unsigned HOST_WIDE_INT base;
+};
+
+extern struct pru_ctable_entry pru_ctable[32];
+
+extern int pru_initial_elimination_offset (int, int);
+extern int pru_can_use_return_insn (void);
+extern void pru_expand_prologue (void);
+extern void pru_expand_epilogue (bool);
+extern void pru_function_profiler (FILE *, int);
+
+void pru_register_pragmas (void);
+
+#ifdef RTX_CODE
+extern rtx pru_get_return_address (int);
+extern int pru_hard_regno_rename_ok (unsigned int, unsigned int);
+
+extern const char * pru_output_sign_extend (rtx *);
+extern const char * pru_output_signed_cbranch (rtx *, bool);
+extern const char * pru_output_signed_cbranch_ubyteop2 (rtx *, bool);
+extern const char * pru_output_signed_cbranch_zeroop2 (rtx *, bool);
+
+extern rtx pru_expand_fp_compare (rtx comparison, machine_mode mode);
+
+extern void pru_emit_doloop (rtx *, int);
+
+extern bool pru_regno_ok_for_base_p (int, bool);
+
+static inline bool
+pru_regno_ok_for_index_p (int regno, bool strict_p)
+{
+ /* Selection logic is the same - PRU instructions are quite orthogonal. */
+ return pru_regno_ok_for_base_p (regno, strict_p);
+}
+
+extern int pru_get_ctable_exact_base_index (unsigned HOST_WIDE_INT caddr);
+extern int pru_get_ctable_base_index (unsigned HOST_WIDE_INT caddr);
+extern int pru_get_ctable_base_offset (unsigned HOST_WIDE_INT caddr);
+
+extern void pru_register_abicheck_pass (void);
+#endif /* RTX_CODE */
+
+#ifdef TREE_CODE
+bool pru_return_in_memory (const_tree type, const_tree fntype ATTRIBUTE_UNUSED);
+#endif /* TREE_CODE */
+
+#endif /* GCC_PRU_PROTOS_H */
diff --git a/gcc/config/pru/pru.c b/gcc/config/pru/pru.c
new file mode 100644
index 00000000000..f1ce8bfeddd
--- /dev/null
+++ b/gcc/config/pru/pru.c
@@ -0,0 +1,3008 @@
+/* Target machine subroutines for TI PRU.
+ Copyright (C) 2014-2018 Free Software Foundation, Inc.
+ Dimitar Dimitrov <dimitar@dinux.eu>
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+#define IN_TARGET_CODE 1
+
+#include "config.h"
+#include "system.h"
+#include "coretypes.h"
+#include "backend.h"
+#include "target.h"
+#include "rtl.h"
+#include "tree.h"
+#include "stringpool.h"
+#include "attribs.h"
+#include "df.h"
+#include "memmodel.h"
+#include "tm_p.h"
+#include "optabs.h"
+#include "regs.h"
+#include "emit-rtl.h"
+#include "recog.h"
+#include "diagnostic-core.h"
+#include "output.h"
+#include "insn-attr.h"
+#include "flags.h"
+#include "explow.h"
+#include "calls.h"
+#include "varasm.h"
+#include "expr.h"
+#include "toplev.h"
+#include "langhooks.h"
+#include "cfgrtl.h"
+#include "stor-layout.h"
+#include "dumpfile.h"
+#include "builtins.h"
+#include "pru-protos.h"
+
+/* This file should be included last. */
+#include "target-def.h"
+
+#define INIT_ARRAY_ENTRY_BYTES 2
+
+/* Global PRU CTABLE entries, filled in by pragmas, and used for fast
+ addressing via LBCO/SBCO instructions. */
+struct pru_ctable_entry pru_ctable[32];
+
+/* Forward function declarations. */
+static bool prologue_saved_reg_p (int);
+static void pru_reorg_loop (rtx_insn *);
+
+struct GTY (()) machine_function
+{
+ /* Current frame information, to be filled in by pru_compute_frame_layout
+ with register save masks, and offsets for the current function. */
+
+ /* Mask of registers to save. */
+ HARD_REG_SET save_mask;
+ /* Number of bytes that the entire frame takes up. */
+ int total_size;
+ /* Number of bytes that variables take up. */
+ int var_size;
+ /* Number of bytes that outgoing arguments take up. */
+ int args_size;
+ /* Number of bytes needed to store registers in frame. */
+ int save_reg_size;
+ /* Offset from new stack pointer to store registers. */
+ int save_regs_offset;
+ /* Offset from save_regs_offset to store frame pointer register. */
+ int fp_save_offset;
+ /* != 0 if frame layout already calculated. */
+ int initialized;
+ /* Number of doloop tags used so far. */
+ int doloop_tags;
+ /* True if the last tag was allocated to a doloop_end. */
+ bool doloop_tag_from_end;
+};
+
+/* Stack layout and calling conventions. */
+
+#define PRU_STACK_ALIGN(LOC) ROUND_UP((LOC), STACK_BOUNDARY / BITS_PER_UNIT)
+
+/* Return the bytes needed to compute the frame pointer from the current
+ stack pointer. */
+static int
+pru_compute_frame_layout (void)
+{
+ int regno;
+ HARD_REG_SET *save_mask;
+ int total_size;
+ int var_size;
+ int out_args_size;
+ int save_reg_size;
+
+ if (cfun->machine->initialized)
+ return cfun->machine->total_size;
+
+ save_mask = &cfun->machine->save_mask;
+ CLEAR_HARD_REG_SET (*save_mask);
+
+ var_size = PRU_STACK_ALIGN ((HOST_WIDE_INT) get_frame_size ());
+ out_args_size = PRU_STACK_ALIGN ((HOST_WIDE_INT) crtl->outgoing_args_size);
+ total_size = var_size + out_args_size;
+
+ /* Calculate space needed for gp registers. */
+ save_reg_size = 0;
+ for (regno = 0; regno <= LAST_GP_REG; regno++)
+ if (prologue_saved_reg_p (regno))
+ {
+ SET_HARD_REG_BIT (*save_mask, regno);
+ save_reg_size += 1;
+ }
+
+ cfun->machine->fp_save_offset = 0;
+ if (TEST_HARD_REG_BIT (*save_mask, HARD_FRAME_POINTER_REGNUM))
+ {
+ int fp_save_offset = 0;
+ for (regno = 0; regno < HARD_FRAME_POINTER_REGNUM; regno++)
+ if (TEST_HARD_REG_BIT (*save_mask, regno))
+ fp_save_offset += 1;
+
+ cfun->machine->fp_save_offset = fp_save_offset;
+ }
+
+ save_reg_size = PRU_STACK_ALIGN (save_reg_size);
+ total_size += save_reg_size;
+ total_size += PRU_STACK_ALIGN (crtl->args.pretend_args_size);
+
+ /* Save other computed information. */
+ cfun->machine->total_size = total_size;
+ cfun->machine->var_size = var_size;
+ cfun->machine->args_size = out_args_size;
+ cfun->machine->save_reg_size = save_reg_size;
+ cfun->machine->initialized = reload_completed;
+ cfun->machine->save_regs_offset = out_args_size + var_size;
+
+ return total_size;
+}
+
+/* Emit efficient RTL equivalent of ADD3 with the given const_int for
+ frame-related registers.
+ op0 - Destination register.
+ op1 - First addendum operand (a register).
+ addendum - Second addendum operand (a constant).
+ kind - Note kind. REG_NOTE_MAX if no note must be added.
+ reg_note_rtx - Reg note RTX. NULL if it should be computed automatically.
+ */
+static rtx
+pru_add3_frame_adjust (rtx op0, rtx op1, int addendum,
+ const enum reg_note kind, rtx reg_note_rtx)
+{
+ rtx insn;
+
+ rtx op0_adjust = gen_rtx_SET (op0, plus_constant (Pmode, op1, addendum));
+
+ if (UBYTE_INT (addendum) || UBYTE_INT (-addendum))
+ insn = emit_insn (op0_adjust);
+ else
+ {
+ /* Help the compiler to cope with an arbitrary integer constant.
+ Reload has finished so we can't expect the compiler to
+ auto-allocate a temporary register. But we know that call-saved
+ registers are not live yet, so we utilize them. */
+ rtx tmpreg = gen_rtx_REG (Pmode, PROLOGUE_TEMP_REGNO);
+ if (addendum < 0)
+ {
+ emit_insn (gen_rtx_SET (tmpreg, gen_int_mode (-addendum, Pmode)));
+ insn = emit_insn (gen_sub3_insn (op0, op1, tmpreg));
+ }
+ else
+ {
+ emit_insn (gen_rtx_SET (tmpreg, gen_int_mode (addendum, Pmode)));
+ insn = emit_insn (gen_add3_insn (op0, op1, tmpreg));
+ }
+ }
+
+ /* Attach a note indicating what happened. */
+ if (reg_note_rtx == NULL_RTX)
+ reg_note_rtx = copy_rtx (op0_adjust);
+ if (kind != REG_NOTE_MAX)
+ add_reg_note (insn, kind, reg_note_rtx);
+
+ RTX_FRAME_RELATED_P (insn) = 1;
+
+ return insn;
+}
+
+/* Add a const_int to the stack pointer register. */
+static rtx
+pru_add_to_sp (int addendum, const enum reg_note kind)
+{
+ return pru_add3_frame_adjust (stack_pointer_rtx, stack_pointer_rtx,
+ addendum, kind, NULL_RTX);
+}
+
+/* Helper function used during prologue/epilogue. Emits a single LBBO/SBBO
+ instruction for load/store of the next group of consecutive registers. */
+static int
+xbbo_next_reg_cluster (int regno_start, int *sp_offset, bool do_store)
+{
+ int regno, nregs, i;
+ rtx addr;
+ rtx_insn *insn;
+
+ nregs = 0;
+
+ /* Skip the empty slots. */
+ for (; regno_start <= LAST_GP_REG;)
+ if (TEST_HARD_REG_BIT (cfun->machine->save_mask, regno_start))
+ break;
+ else
+ regno_start++;
+
+ /* Find the largest consecutive group of registers to save. */
+ for (regno = regno_start; regno <= LAST_GP_REG;)
+ if (TEST_HARD_REG_BIT (cfun->machine->save_mask, regno))
+ {
+ regno++;
+ nregs++;
+ }
+ else
+ break;
+
+ if (!nregs)
+ return -1;
+
+ gcc_assert (UBYTE_INT (*sp_offset));
+
+ /* Ok, save this bunch. */
+ addr = gen_rtx_PLUS (Pmode, stack_pointer_rtx,
+ gen_int_mode (*sp_offset, Pmode));
+
+ if (do_store)
+ insn = targetm.gen_store_multiple (gen_frame_mem (BLKmode, addr),
+ gen_rtx_REG (QImode, regno_start),
+ GEN_INT (nregs));
+ else
+ insn = targetm.gen_load_multiple (gen_rtx_REG (QImode, regno_start),
+ gen_frame_mem (BLKmode, addr),
+ GEN_INT (nregs));
+
+ gcc_assert (reload_completed);
+ gcc_assert (insn);
+ emit_insn (insn);
+
+ /* Tag as frame-related. */
+ RTX_FRAME_RELATED_P (insn) = 1;
+
+ if (!do_store)
+ {
+ /* Tag epilogue unwind notes. */
+ for (i = regno_start; i < (regno_start + nregs); i++)
+ add_reg_note (insn, REG_CFA_RESTORE, gen_rtx_REG (QImode, i));
+ }
+
+ /* Increment and save offset in anticipation of the next register group. */
+ *sp_offset += nregs * UNITS_PER_WORD;
+
+ return regno_start + nregs;
+}
+
+/* Emit function prologue. */
+void
+pru_expand_prologue (void)
+{
+ int regno_start;
+ int total_frame_size;
+ int sp_offset; /* Offset from base_reg to final stack value. */
+ int save_regs_base; /* Offset from base_reg to register save area. */
+ int save_offset; /* Temporary offset to currently saved register group. */
+ rtx insn;
+
+ total_frame_size = pru_compute_frame_layout ();
+
+ if (flag_stack_usage_info)
+ current_function_static_stack_size = total_frame_size;
+
+ /* Decrement the stack pointer. */
+ if (!UBYTE_INT (total_frame_size))
+ {
+ /* We need an intermediary point, this will point at the spill block. */
+ insn = pru_add_to_sp (cfun->machine->save_regs_offset
+ - total_frame_size,
+ REG_NOTE_MAX);
+ save_regs_base = 0;
+ sp_offset = -cfun->machine->save_regs_offset;
+ }
+ else if (total_frame_size)
+ {
+ insn = emit_insn (gen_sub2_insn (stack_pointer_rtx,
+ gen_int_mode (total_frame_size,
+ Pmode)));
+ RTX_FRAME_RELATED_P (insn) = 1;
+ save_regs_base = cfun->machine->save_regs_offset;
+ sp_offset = 0;
+ }
+ else
+ save_regs_base = sp_offset = 0;
+
+ regno_start = 0;
+ save_offset = save_regs_base;
+ do {
+ regno_start = xbbo_next_reg_cluster (regno_start, &save_offset, true);
+ } while (regno_start >= 0);
+
+ if (frame_pointer_needed)
+ {
+ int fp_save_offset = save_regs_base + cfun->machine->fp_save_offset;
+ pru_add3_frame_adjust (hard_frame_pointer_rtx,
+ stack_pointer_rtx,
+ fp_save_offset,
+ REG_NOTE_MAX,
+ NULL_RTX);
+ }
+
+ if (sp_offset)
+ pru_add_to_sp (sp_offset, REG_FRAME_RELATED_EXPR);
+
+ /* If we are profiling, make sure no instructions are scheduled before
+ the call to mcount. */
+ if (crtl->profile)
+ emit_insn (gen_blockage ());
+}
+
+/* Emit function epilogue. */
+void
+pru_expand_epilogue (bool sibcall_p)
+{
+ rtx cfa_adj;
+ int total_frame_size;
+ int sp_adjust, save_offset;
+ int regno_start;
+
+ if (!sibcall_p && pru_can_use_return_insn ())
+ {
+ emit_jump_insn (gen_return ());
+ return;
+ }
+
+ emit_insn (gen_blockage ());
+
+ total_frame_size = pru_compute_frame_layout ();
+ if (frame_pointer_needed)
+ {
+ /* Recover the stack pointer. */
+ cfa_adj = plus_constant (Pmode, stack_pointer_rtx,
+ (total_frame_size
+ - cfun->machine->save_regs_offset));
+ pru_add3_frame_adjust (stack_pointer_rtx,
+ hard_frame_pointer_rtx,
+ -cfun->machine->fp_save_offset,
+ REG_CFA_DEF_CFA,
+ cfa_adj);
+
+ save_offset = 0;
+ sp_adjust = total_frame_size - cfun->machine->save_regs_offset;
+ }
+ else if (!UBYTE_INT (total_frame_size))
+ {
+ pru_add_to_sp (cfun->machine->save_regs_offset,
+ REG_CFA_ADJUST_CFA);
+ save_offset = 0;
+ sp_adjust = total_frame_size - cfun->machine->save_regs_offset;
+ }
+ else
+ {
+ save_offset = cfun->machine->save_regs_offset;
+ sp_adjust = total_frame_size;
+ }
+
+ regno_start = 0;
+ do {
+ regno_start = xbbo_next_reg_cluster (regno_start, &save_offset, false);
+ } while (regno_start >= 0);
+
+ /* Emit a blockage insn here to keep these insns from being moved to
+ an earlier spot in the epilogue.
+
+ This is necessary as we must not cut the stack back before all the
+ restores are finished. */
+ emit_insn (gen_blockage ());
+
+ if (sp_adjust)
+ pru_add_to_sp (sp_adjust, REG_CFA_ADJUST_CFA);
+
+ if (!sibcall_p)
+ emit_jump_insn (gen_simple_return ());
+}
+
+/* Implement RETURN_ADDR_RTX. Note, we do not support moving
+ back to a previous frame. */
+rtx
+pru_get_return_address (int count)
+{
+ if (count != 0)
+ return NULL_RTX;
+
+ /* Return r3.w2. */
+ return get_hard_reg_initial_val (HImode, RA_REGNO);
+}
+
+/* Implement FUNCTION_PROFILER macro. */
+void
+pru_function_profiler (FILE *file, int labelno ATTRIBUTE_UNUSED)
+{
+ fprintf (file, "\tmov\tr1, ra\n");
+ fprintf (file, "\tcall\t_mcount\n");
+ fprintf (file, "\tmov\tra, r1\n");
+}
+
+/* Dump stack layout. */
+static void
+pru_dump_frame_layout (FILE *file)
+{
+ fprintf (file, "\t%s Current Frame Info\n", ASM_COMMENT_START);
+ fprintf (file, "\t%s total_size = %d\n", ASM_COMMENT_START,
+ cfun->machine->total_size);
+ fprintf (file, "\t%s var_size = %d\n", ASM_COMMENT_START,
+ cfun->machine->var_size);
+ fprintf (file, "\t%s args_size = %d\n", ASM_COMMENT_START,
+ cfun->machine->args_size);
+ fprintf (file, "\t%s save_reg_size = %d\n", ASM_COMMENT_START,
+ cfun->machine->save_reg_size);
+ fprintf (file, "\t%s initialized = %d\n", ASM_COMMENT_START,
+ cfun->machine->initialized);
+ fprintf (file, "\t%s save_regs_offset = %d\n", ASM_COMMENT_START,
+ cfun->machine->save_regs_offset);
+ fprintf (file, "\t%s is_leaf = %d\n", ASM_COMMENT_START,
+ crtl->is_leaf);
+ fprintf (file, "\t%s frame_pointer_needed = %d\n", ASM_COMMENT_START,
+ frame_pointer_needed);
+ fprintf (file, "\t%s pretend_args_size = %d\n", ASM_COMMENT_START,
+ crtl->args.pretend_args_size);
+}
+
+/* Return true if REGNO should be saved in the prologue. */
+static bool
+prologue_saved_reg_p (int regno)
+{
+ gcc_assert (GP_REG_P (regno));
+
+ if (df_regs_ever_live_p (regno) && !call_used_regs[regno])
+ return true;
+
+ /* 32-bit FP. */
+ if (frame_pointer_needed
+ && regno >= HARD_FRAME_POINTER_REGNUM
+ && regno < HARD_FRAME_POINTER_REGNUM + GET_MODE_SIZE (Pmode))
+ return true;
+
+ /* 16-bit RA. */
+ if (regno == RA_REGNO && df_regs_ever_live_p (RA_REGNO))
+ return true;
+ if (regno == RA_REGNO + 1 && df_regs_ever_live_p (RA_REGNO + 1))
+ return true;
+
+ return false;
+}
+
+/* Implement TARGET_CAN_ELIMINATE. */
+static bool
+pru_can_eliminate (const int from ATTRIBUTE_UNUSED, const int to)
+{
+ if (to == STACK_POINTER_REGNUM)
+ return !frame_pointer_needed;
+ return true;
+}
+
+/* Implement INITIAL_ELIMINATION_OFFSET macro. */
+int
+pru_initial_elimination_offset (int from, int to)
+{
+ int offset;
+
+ pru_compute_frame_layout ();
+
+ /* Set OFFSET to the offset from the stack pointer. */
+ switch (from)
+ {
+ case FRAME_POINTER_REGNUM:
+ offset = cfun->machine->args_size;
+ break;
+
+ case ARG_POINTER_REGNUM:
+ offset = cfun->machine->total_size;
+ offset -= crtl->args.pretend_args_size;
+ break;
+
+ default:
+ gcc_unreachable ();
+ }
+
+ /* If we are asked for the frame pointer offset, then adjust OFFSET
+ by the offset from the frame pointer to the stack pointer. */
+ if (to == HARD_FRAME_POINTER_REGNUM)
+ offset -= (cfun->machine->save_regs_offset
+ + cfun->machine->fp_save_offset);
+
+ return offset;
+}
+
+/* Return nonzero if this function is known to have a null epilogue.
+ This allows the optimizer to omit jumps to jumps if no stack
+ was created. */
+int
+pru_can_use_return_insn (void)
+{
+ if (!reload_completed || crtl->profile)
+ return 0;
+
+ return pru_compute_frame_layout () == 0;
+}
+
+/* Implement TARGET_MODES_TIEABLE_P. */
+
+static bool
+pru_modes_tieable_p (machine_mode mode1, machine_mode mode2)
+{
+ return (mode1 == mode2
+ || (GET_MODE_SIZE (mode1) <= 4 && GET_MODE_SIZE (mode2) <= 4));
+}
+
+/* Implement TARGET_HARD_REGNO_MODE_OK. */
+
+static bool
+pru_hard_regno_mode_ok (unsigned int regno, machine_mode mode)
+{
+ switch (GET_MODE_SIZE (mode))
+ {
+ case 1: return true;
+ case 2: return (regno % 4) <= 2;
+ case 4: return (regno % 4) == 0;
+ default: return (regno % 4) == 0; /* Not sure why VOIDmode is passed. */
+ }
+}
+
+/* Implement `TARGET_HARD_REGNO_SCRATCH_OK'.
+ Returns true if REGNO is safe to be allocated as a scratch
+ register (for a define_peephole2) in the current function. */
+
+static bool
+pru_hard_regno_scratch_ok (unsigned int regno)
+{
+ /* Don't allow hard registers that might be part of the frame pointer.
+ Some places in the compiler just test for [HARD_]FRAME_POINTER_REGNUM
+ and don't handle a frame pointer that spans more than one register. */
+
+ if ((!reload_completed || frame_pointer_needed)
+ && ((regno >= HARD_FRAME_POINTER_REGNUM
+ && regno <= HARD_FRAME_POINTER_REGNUM + 3)
+ || (regno >= FRAME_POINTER_REGNUM
+ && regno <= FRAME_POINTER_REGNUM + 3)))
+ {
+ return false;
+ }
+
+ return true;
+}
+
+
+/* Worker function for `HARD_REGNO_RENAME_OK'.
+ Return nonzero if register OLD_REG can be renamed to register NEW_REG. */
+
+int
+pru_hard_regno_rename_ok (unsigned int old_reg,
+ unsigned int new_reg)
+{
+ /* Don't allow hard registers that might be part of the frame pointer.
+ Some places in the compiler just test for [HARD_]FRAME_POINTER_REGNUM
+ and don't care for a frame pointer that spans more than one register. */
+ if ((!reload_completed || frame_pointer_needed)
+ && ((old_reg >= HARD_FRAME_POINTER_REGNUM
+ && old_reg <= HARD_FRAME_POINTER_REGNUM + 3)
+ || (old_reg >= FRAME_POINTER_REGNUM
+ && old_reg <= FRAME_POINTER_REGNUM + 3)
+ || (new_reg >= HARD_FRAME_POINTER_REGNUM
+ && new_reg <= HARD_FRAME_POINTER_REGNUM + 3)
+ || (new_reg >= FRAME_POINTER_REGNUM
+ && new_reg <= FRAME_POINTER_REGNUM + 3)))
+ {
+ return 0;
+ }
+
+ return 1;
+}
+
+/* Allocate a chunk of memory for per-function machine-dependent data. */
+static struct machine_function *
+pru_init_machine_status (void)
+{
+ return ggc_cleared_alloc<machine_function> ();
+}
+
+/* Implement TARGET_OPTION_OVERRIDE. */
+static void
+pru_option_override (void)
+{
+#ifdef SUBTARGET_OVERRIDE_OPTIONS
+ SUBTARGET_OVERRIDE_OPTIONS;
+#endif
+
+ /* Check for unsupported options. */
+ if (flag_pic == 1)
+ warning (OPT_fpic, "%<-fpic%> is not supported");
+ if (flag_pic == 2)
+ warning (OPT_fPIC, "%<-fPIC%> is not supported");
+ if (flag_pie == 1)
+ warning (OPT_fpie, "%<-fpie%> is not supported");
+ if (flag_pie == 2)
+ warning (OPT_fPIE, "%<-fPIE%> is not supported");
+
+ /* QBxx conditional branching cannot cope with block reordering. */
+ if (flag_reorder_blocks_and_partition)
+ {
+ inform (input_location, "%<-freorder-blocks-and-partition%> "
+ "not supported on this architecture");
+ flag_reorder_blocks_and_partition = 0;
+ flag_reorder_blocks = 1;
+ }
+
+ /* Function to allocate machine-dependent function status. */
+ init_machine_status = &pru_init_machine_status;
+
+ /* Save the initial options in case the user does function specific
+ options. */
+ target_option_default_node = target_option_current_node
+ = build_target_option_node (&global_options);
+
+ /* Due to difficulties in implementing the TI ABI with GCC,
+ at least check and error-out if GCC cannot compile a
+ compliant output. */
+ pru_register_abicheck_pass ();
+}
+
+/* Compute a (partial) cost for rtx X. Return true if the complete
+ cost has been computed, and false if subexpressions should be
+ scanned. In either case, *TOTAL contains the cost result. */
+static bool
+pru_rtx_costs (rtx x, machine_mode mode ATTRIBUTE_UNUSED,
+ int outer_code, int opno ATTRIBUTE_UNUSED,
+ int *total, bool speed ATTRIBUTE_UNUSED)
+{
+ const int code = GET_CODE (x);
+
+ switch (code)
+ {
+ case CONST_INT:
+ if (UBYTE_INT (INTVAL (x)))
+ {
+ *total = COSTS_N_INSNS (0);
+ return true;
+ }
+ else if (outer_code == MEM && ctable_addr_operand (x, VOIDmode))
+ {
+ *total = COSTS_N_INSNS (0);
+ return true;
+ }
+ else if (UHWORD_INT (INTVAL (x)))
+ {
+ *total = COSTS_N_INSNS (1);
+ return true;
+ }
+ else
+ {
+ *total = COSTS_N_INSNS (2);
+ return true;
+ }
+
+ case LABEL_REF:
+ case SYMBOL_REF:
+ case CONST:
+ case CONST_DOUBLE:
+ {
+ *total = COSTS_N_INSNS (1);
+ return true;
+ }
+ case SET:
+ {
+ /* A SET doesn't have a mode, so let's look at the SET_DEST to get
+ the mode for the factor. */
+ mode = GET_MODE (SET_DEST (x));
+
+ if (GET_MODE_SIZE (mode) <= GET_MODE_SIZE (SImode)
+ && (GET_CODE (SET_SRC (x)) == ZERO_EXTEND
+ || outer_code == ZERO_EXTEND))
+ {
+ *total = 0;
+ }
+ else
+ {
+ /* SI move has the same cost as a QI move. */
+ int factor = GET_MODE_SIZE (mode) / GET_MODE_SIZE (SImode);
+ if (factor == 0)
+ factor = 1;
+ *total = factor * COSTS_N_INSNS (1);
+ }
+
+ return false;
+ }
+
+ case MULT:
+ {
+ *total = COSTS_N_INSNS (8);
+ return false;
+ }
+ case PLUS:
+ {
+ rtx op0 = XEXP (x, 0);
+ rtx op1 = XEXP (x, 1);
+ if (outer_code == MEM
+ && ((REG_P (op0) && reg_or_ubyte_operand (op1, VOIDmode))
+ || (REG_P (op1) && reg_or_ubyte_operand (op0, VOIDmode))
+ || (ctable_addr_operand (op0, VOIDmode) && op1 == NULL_RTX)
+ || (ctable_addr_operand (op1, VOIDmode) && op0 == NULL_RTX)
+ || (ctable_base_operand (op0, VOIDmode) && REG_P (op1))
+ || (ctable_base_operand (op1, VOIDmode) && REG_P (op0))))
+ {
+ /* CTABLE or REG base addressing - PLUS comes for free. */
+ *total = COSTS_N_INSNS (0);
+ return true;
+ }
+ else
+ {
+ *total = COSTS_N_INSNS (1);
+ return false;
+ }
+ }
+ case SIGN_EXTEND:
+ {
+ *total = COSTS_N_INSNS (3);
+ return false;
+ }
+ case ASHIFTRT:
+ {
+ rtx op1 = XEXP (x, 1);
+ if (const_1_operand (op1, VOIDmode))
+ *total = COSTS_N_INSNS (2);
+ else
+ *total = COSTS_N_INSNS (6);
+ return false;
+ }
+ case ZERO_EXTRACT:
+ {
+ rtx op2 = XEXP (x, 2);
+ if ((outer_code == EQ || outer_code == NE)
+ && CONST_INT_P (op2)
+ && INTVAL (op2) == 1)
+ {
+ /* Branch if bit is set/clear is a single instruction. */
+ *total = COSTS_N_INSNS (0);
+ return true;
+ }
+ else
+ {
+ *total = COSTS_N_INSNS (2);
+ return false;
+ }
+ }
+
+ case ZERO_EXTEND:
+ {
+ *total = COSTS_N_INSNS (0);
+ return false;
+ }
+
+ default:
+ {
+ /* Do not factor mode size in the cost. */
+ *total = COSTS_N_INSNS (1);
+ return false;
+ }
+ }
+}
+
+/* Implement TARGET_PREFERRED_RELOAD_CLASS. */
+static reg_class_t
+pru_preferred_reload_class (rtx x ATTRIBUTE_UNUSED, reg_class_t regclass)
+{
+ return regclass == NO_REGS ? GENERAL_REGS : regclass;
+}
+
+static GTY(()) rtx eqdf_libfunc;
+static GTY(()) rtx nedf_libfunc;
+static GTY(()) rtx ledf_libfunc;
+static GTY(()) rtx ltdf_libfunc;
+static GTY(()) rtx gedf_libfunc;
+static GTY(()) rtx gtdf_libfunc;
+static GTY(()) rtx eqsf_libfunc;
+static GTY(()) rtx nesf_libfunc;
+static GTY(()) rtx lesf_libfunc;
+static GTY(()) rtx ltsf_libfunc;
+static GTY(()) rtx gesf_libfunc;
+static GTY(()) rtx gtsf_libfunc;
+
+/* Implement the TARGET_INIT_LIBFUNCS macro. We use this to rename library
+ functions to match the PRU ABI. */
+
+static void
+pru_init_libfuncs (void)
+{
+ /* Double-precision floating-point arithmetic. */
+ set_optab_libfunc (add_optab, DFmode, "__pruabi_addd");
+ set_optab_libfunc (sdiv_optab, DFmode, "__pruabi_divd");
+ set_optab_libfunc (smul_optab, DFmode, "__pruabi_mpyd");
+ set_optab_libfunc (neg_optab, DFmode, "__pruabi_negd");
+ set_optab_libfunc (sub_optab, DFmode, "__pruabi_subd");
+
+ /* Single-precision floating-point arithmetic. */
+ set_optab_libfunc (add_optab, SFmode, "__pruabi_addf");
+ set_optab_libfunc (sdiv_optab, SFmode, "__pruabi_divf");
+ set_optab_libfunc (smul_optab, SFmode, "__pruabi_mpyf");
+ set_optab_libfunc (neg_optab, SFmode, "__pruabi_negf");
+ set_optab_libfunc (sub_optab, SFmode, "__pruabi_subf");
+
+ /* Floating-point comparisons. */
+ eqsf_libfunc = init_one_libfunc ("__pruabi_eqf");
+ nesf_libfunc = init_one_libfunc ("__pruabi_neqf");
+ lesf_libfunc = init_one_libfunc ("__pruabi_lef");
+ ltsf_libfunc = init_one_libfunc ("__pruabi_ltf");
+ gesf_libfunc = init_one_libfunc ("__pruabi_gef");
+ gtsf_libfunc = init_one_libfunc ("__pruabi_gtf");
+ eqdf_libfunc = init_one_libfunc ("__pruabi_eqd");
+ nedf_libfunc = init_one_libfunc ("__pruabi_neqd");
+ ledf_libfunc = init_one_libfunc ("__pruabi_led");
+ ltdf_libfunc = init_one_libfunc ("__pruabi_ltd");
+ gedf_libfunc = init_one_libfunc ("__pruabi_ged");
+ gtdf_libfunc = init_one_libfunc ("__pruabi_gtd");
+
+ set_optab_libfunc (eq_optab, SFmode, NULL);
+ set_optab_libfunc (ne_optab, SFmode, "__pruabi_neqf");
+ set_optab_libfunc (gt_optab, SFmode, NULL);
+ set_optab_libfunc (ge_optab, SFmode, NULL);
+ set_optab_libfunc (lt_optab, SFmode, NULL);
+ set_optab_libfunc (le_optab, SFmode, NULL);
+ set_optab_libfunc (unord_optab, SFmode, "__pruabi_unordf");
+ set_optab_libfunc (eq_optab, DFmode, NULL);
+ set_optab_libfunc (ne_optab, DFmode, "__pruabi_neqd");
+ set_optab_libfunc (gt_optab, DFmode, NULL);
+ set_optab_libfunc (ge_optab, DFmode, NULL);
+ set_optab_libfunc (lt_optab, DFmode, NULL);
+ set_optab_libfunc (le_optab, DFmode, NULL);
+ set_optab_libfunc (unord_optab, DFmode, "__pruabi_unordd");
+
+ /* Floating-point to integer conversions. */
+ set_conv_libfunc (sfix_optab, SImode, DFmode, "__pruabi_fixdi");
+ set_conv_libfunc (ufix_optab, SImode, DFmode, "__pruabi_fixdu");
+ set_conv_libfunc (sfix_optab, DImode, DFmode, "__pruabi_fixdlli");
+ set_conv_libfunc (ufix_optab, DImode, DFmode, "__pruabi_fixdull");
+ set_conv_libfunc (sfix_optab, SImode, SFmode, "__pruabi_fixfi");
+ set_conv_libfunc (ufix_optab, SImode, SFmode, "__pruabi_fixfu");
+ set_conv_libfunc (sfix_optab, DImode, SFmode, "__pruabi_fixflli");
+ set_conv_libfunc (ufix_optab, DImode, SFmode, "__pruabi_fixfull");
+
+ /* Conversions between floating types. */
+ set_conv_libfunc (trunc_optab, SFmode, DFmode, "__pruabi_cvtdf");
+ set_conv_libfunc (sext_optab, DFmode, SFmode, "__pruabi_cvtfd");
+
+ /* Integer to floating-point conversions. */
+ set_conv_libfunc (sfloat_optab, DFmode, SImode, "__pruabi_fltid");
+ set_conv_libfunc (ufloat_optab, DFmode, SImode, "__pruabi_fltud");
+ set_conv_libfunc (sfloat_optab, DFmode, DImode, "__pruabi_fltllid");
+ set_conv_libfunc (ufloat_optab, DFmode, DImode, "__pruabi_fltulld");
+ set_conv_libfunc (sfloat_optab, SFmode, SImode, "__pruabi_fltif");
+ set_conv_libfunc (ufloat_optab, SFmode, SImode, "__pruabi_fltuf");
+ set_conv_libfunc (sfloat_optab, SFmode, DImode, "__pruabi_fltllif");
+ set_conv_libfunc (ufloat_optab, SFmode, DImode, "__pruabi_fltullf");
+
+ /* Long long. */
+ set_optab_libfunc (ashr_optab, DImode, "__pruabi_asrll");
+ set_optab_libfunc (smul_optab, DImode, "__pruabi_mpyll");
+ set_optab_libfunc (ashl_optab, DImode, "__pruabi_lslll");
+ set_optab_libfunc (lshr_optab, DImode, "__pruabi_lsrll");
+
+ set_optab_libfunc (sdiv_optab, SImode, "__pruabi_divi");
+ set_optab_libfunc (udiv_optab, SImode, "__pruabi_divu");
+ set_optab_libfunc (smod_optab, SImode, "__pruabi_remi");
+ set_optab_libfunc (umod_optab, SImode, "__pruabi_remu");
+ set_optab_libfunc (sdivmod_optab, SImode, "__pruabi_divremi");
+ set_optab_libfunc (udivmod_optab, SImode, "__pruabi_divremu");
+ set_optab_libfunc (sdiv_optab, DImode, "__pruabi_divlli");
+ set_optab_libfunc (udiv_optab, DImode, "__pruabi_divull");
+ set_optab_libfunc (smod_optab, DImode, "__pruabi_remlli");
+ set_optab_libfunc (umod_optab, DImode, "__pruabi_remull");
+ set_optab_libfunc (udivmod_optab, DImode, "__pruabi_divremull");
+}
+
+
+/* Emit comparison instruction if necessary, returning the expression
+ that holds the compare result in the proper mode. Return the comparison
+ that should be used in the jump insn. */
+
+rtx
+pru_expand_fp_compare (rtx comparison, machine_mode mode)
+{
+ enum rtx_code code = GET_CODE (comparison);
+ rtx op0 = XEXP (comparison, 0);
+ rtx op1 = XEXP (comparison, 1);
+ rtx cmp;
+ enum rtx_code jump_code = code;
+ machine_mode op_mode = GET_MODE (op0);
+ rtx_insn *insns;
+ rtx libfunc;
+
+ gcc_assert (op_mode == DFmode || op_mode == SFmode);
+
+ if (code == UNGE)
+ {
+ code = LT;
+ jump_code = EQ;
+ }
+ else if (code == UNLE)
+ {
+ code = GT;
+ jump_code = EQ;
+ }
+ else
+ jump_code = NE;
+
+ switch (code)
+ {
+ case EQ:
+ libfunc = op_mode == DFmode ? eqdf_libfunc : eqsf_libfunc;
+ break;
+ case NE:
+ libfunc = op_mode == DFmode ? nedf_libfunc : nesf_libfunc;
+ break;
+ case GT:
+ libfunc = op_mode == DFmode ? gtdf_libfunc : gtsf_libfunc;
+ break;
+ case GE:
+ libfunc = op_mode == DFmode ? gedf_libfunc : gesf_libfunc;
+ break;
+ case LT:
+ libfunc = op_mode == DFmode ? ltdf_libfunc : ltsf_libfunc;
+ break;
+ case LE:
+ libfunc = op_mode == DFmode ? ledf_libfunc : lesf_libfunc;
+ break;
+ default:
+ gcc_unreachable ();
+ }
+ start_sequence ();
+
+ cmp = emit_library_call_value (libfunc, 0, LCT_CONST, SImode,
+ op0, op_mode, op1, op_mode);
+ insns = get_insns ();
+ end_sequence ();
+
+ emit_libcall_block (insns, cmp, cmp,
+ gen_rtx_fmt_ee (code, SImode, op0, op1));
+
+ return gen_rtx_fmt_ee (jump_code, mode, cmp, const0_rtx);
+}
+
+/* Return the sign bit position for given OP's mode. */
+static int
+sign_bit_position (const rtx op)
+{
+ const int sz = GET_MODE_SIZE (GET_MODE (op));
+
+ return sz * 8 - 1;
+}
+
+/* Output asm code for sign_extend operation. */
+const char *
+pru_output_sign_extend (rtx *operands)
+{
+ static char buf[512];
+ int bufi;
+ const int dst_sz = GET_MODE_SIZE (GET_MODE (operands[0]));
+ const int src_sz = GET_MODE_SIZE (GET_MODE (operands[1]));
+ char ext_start;
+
+ switch (src_sz)
+ {
+ case 1: ext_start = 'y'; break;
+ case 2: ext_start = 'z'; break;
+ default: gcc_unreachable ();
+ }
+
+ gcc_assert (dst_sz > src_sz);
+
+ /* Note that src and dst can be different parts of the same
+ register, e.g. "r7, r7.w1". */
+ bufi = snprintf (buf, sizeof (buf),
+ "mov\t%%0, %%1\n\t" /* Copy AND make positive. */
+ "qbbc\t.+8, %%0, %d\n\t" /* Check sign bit. */
+ "fill\t%%%c0, %d", /* Make negative. */
+ sign_bit_position (operands[1]),
+ ext_start,
+ dst_sz - src_sz);
+
+ gcc_assert (bufi > 0);
+ gcc_assert ((unsigned int)bufi < sizeof (buf));
+
+ return buf;
+}
+
+/* Branches and compares. */
+
+/* PRU's ALU does not support signed comparison operations. That's why we
+ emulate them. By first checking the sign bit and handling every possible
+ operand sign combination, we can simulate signed comparisons in just
+ 5 instructions. See table below.
+
+.-------------------.---------------------------------------------------.
+| Operand sign bit | Mapping the signed comparison to an unsigned one |
+|---------+---------+------------+------------+------------+------------|
+| OP1.b31 | OP2.b31 | OP1 < OP2 | OP1 <= OP2 | OP1 > OP2 | OP1 >= OP2 |
+|---------+---------+------------+------------+------------+------------|
+| 0 | 0 | OP1 < OP2 | OP1 <= OP2 | OP1 > OP2 | OP1 >= OP2 |
+|---------+---------+------------+------------+------------+------------|
+| 0 | 1 | false | false | true | true |
+|---------+---------+------------+------------+------------+------------|
+| 1 | 0 | true | true | false | false |
+|---------+---------+------------+------------+------------+------------|
+| 1 | 1 | OP1 < OP2 | OP1 <= OP2 | OP1 > OP2 | OP1 >= OP2 |
+`---------'---------'------------'------------'------------+------------'
+
+
+Given the table above, here is an example for a concrete op:
+ LT:
+ qbbc OP1_POS, OP1, 31
+ OP1_NEG: qbbc BRANCH_TAKEN_LABEL, OP2, 31
+ OP1_NEG_OP2_NEG: qblt BRANCH_TAKEN_LABEL, OP2, OP1
+ ; jmp OUT -> can be eliminated because we'll take the
+ ; following branch. OP2.b31 is guaranteed to be 1
+ ; by the time we get here.
+ OP1_POS: qbbs OUT, OP2, 31
+ OP1_POS_OP2_POS: qblt BRANCH_TAKEN_LABEL, OP2, OP1
+#if FAR_JUMP
+ jmp OUT
+BRANCH_TAKEN_LABEL: jmp REAL_BRANCH_TAKEN_LABEL
+#endif
+ OUT:
+
+*/
+
+/* Output asm code for a signed-compare LT/LE conditional branch. */
+static const char *
+pru_output_ltle_signed_cbranch (rtx *operands, bool is_near)
+{
+ static char buf[1024];
+ enum rtx_code code = GET_CODE (operands[0]);
+ rtx op1;
+ rtx op2;
+ const char *cmp_opstr;
+ int bufi = 0;
+
+ op1 = operands[1];
+ op2 = operands[2];
+
+ gcc_assert (GET_CODE (op1) == REG && GET_CODE (op2) == REG);
+
+ /* Determine the comparison operators for positive and negative operands. */
+ if (code == LT)
+ cmp_opstr = "qblt";
+ else if (code == LE)
+ cmp_opstr = "qble";
+ else
+ gcc_unreachable ();
+
+ if (is_near)
+ {
+ bufi = snprintf (buf, sizeof (buf),
+ "qbbc\t.+12, %%1, %d\n\t"
+ "qbbc\t%%l3, %%2, %d\n\t" /* OP1_NEG. */
+ "%s\t%%l3, %%2, %%1\n\t" /* OP1_NEG_OP2_NEG. */
+ "qbbs\t.+8, %%2, %d\n\t" /* OP1_POS. */
+ "%s\t%%l3, %%2, %%1", /* OP1_POS_OP2_POS. */
+ sign_bit_position (op1),
+ sign_bit_position (op2),
+ cmp_opstr,
+ sign_bit_position (op2),
+ cmp_opstr);
+ }
+ else
+ {
+ bufi = snprintf (buf, sizeof (buf),
+ "qbbc\t.+12, %%1, %d\n\t"
+ "qbbc\t.+20, %%2, %d\n\t" /* OP1_NEG. */
+ "%s\t.+16, %%2, %%1\n\t" /* OP1_NEG_OP2_NEG. */
+ "qbbs\t.+16, %%2, %d\n\t" /* OP1_POS. */
+ "%s\t.+8, %%2, %%1\n\t" /* OP1_POS_OP2_POS. */
+ "jmp\t.+8\n\t" /* jmp OUT. */
+ "jmp\t%%%%label(%%l3)", /* BRANCH_TAKEN_LABEL. */
+ sign_bit_position (op1),
+ sign_bit_position (op2),
+ cmp_opstr,
+ sign_bit_position (op2),
+ cmp_opstr);
+ }
+
+ gcc_assert (bufi > 0);
+ gcc_assert ((unsigned int)bufi < sizeof (buf));
+
+ return buf;
+}
+
+/* Output asm code for a signed-compare GT/GE conditional branch. */
+static const char *
+pru_output_gtge_signed_cbranch (rtx *operands, bool is_near)
+{
+ static char buf[1024];
+ enum rtx_code code = GET_CODE (operands[0]);
+ rtx op1;
+ rtx op2;
+ const char *cmp_opstr;
+ int bufi = 0;
+
+ op1 = operands[1];
+ op2 = operands[2];
+
+ gcc_assert (GET_CODE (op1) == REG && GET_CODE (op2) == REG);
+
+ /* Determine the comparison operators for positive and negative operands. */
+ if (code == GT)
+ cmp_opstr = "qbgt";
+ else if (code == GE)
+ cmp_opstr = "qbge";
+ else
+ gcc_unreachable ();
+
+ if (is_near)
+ {
+ bufi = snprintf (buf, sizeof (buf),
+ "qbbs\t.+12, %%1, %d\n\t"
+ "qbbs\t%%l3, %%2, %d\n\t" /* OP1_POS. */
+ "%s\t%%l3, %%2, %%1\n\t" /* OP1_POS_OP2_POS. */
+ "qbbc\t.+8, %%2, %d\n\t" /* OP1_NEG. */
+ "%s\t%%l3, %%2, %%1", /* OP1_NEG_OP2_NEG. */
+ sign_bit_position (op1),
+ sign_bit_position (op2),
+ cmp_opstr,
+ sign_bit_position (op2),
+ cmp_opstr);
+ }
+ else
+ {
+ bufi = snprintf (buf, sizeof (buf),
+ "qbbs\t.+12, %%1, %d\n\t"
+ "qbbs\t.+20, %%2, %d\n\t" /* OP1_POS. */
+ "%s\t.+16, %%2, %%1\n\t" /* OP1_POS_OP2_POS. */
+ "qbbc\t.+16, %%2, %d\n\t" /* OP1_NEG. */
+ "%s\t.+8, %%2, %%1\n\t" /* OP1_NEG_OP2_NEG. */
+ "jmp\t.+8\n\t" /* jmp OUT. */
+ "jmp\t%%%%label(%%l3)", /* BRANCH_TAKEN_LABEL. */
+ sign_bit_position (op1),
+ sign_bit_position (op2),
+ cmp_opstr,
+ sign_bit_position (op2),
+ cmp_opstr);
+ }
+
+ gcc_assert (bufi > 0);
+ gcc_assert ((unsigned int)bufi < sizeof (buf));
+
+ return buf;
+}
+
+/* Output asm code for a signed-compare conditional branch.
+
+ If IS_NEAR is true, then QBBx instructions may be used for reaching
+ the destination label. Otherwise JMP is used, at the expense of
+ increased code size. */
+const char *
+pru_output_signed_cbranch (rtx *operands, bool is_near)
+{
+ enum rtx_code code = GET_CODE (operands[0]);
+
+ if (code == LT || code == LE)
+ return pru_output_ltle_signed_cbranch (operands, is_near);
+ else if (code == GT || code == GE)
+ return pru_output_gtge_signed_cbranch (operands, is_near);
+ else
+ gcc_unreachable ();
+}
+
+/*
+ Optimized version of pru_output_signed_cbranch for constant second
+ operand. */
+
+const char *
+pru_output_signed_cbranch_ubyteop2 (rtx *operands, bool is_near)
+{
+ static char buf[1024];
+ enum rtx_code code = GET_CODE (operands[0]);
+ int regop_sign_bit_pos = sign_bit_position (operands[1]);
+ const char *cmp_opstr;
+ const char *rcmp_opstr;
+
+ /* We must swap operands due to PRU's demand OP1 to be the immediate. */
+ code = swap_condition (code);
+
+ /* Determine normal and reversed comparison operators for both positive
+ operands. This enables us to go completely unsigned.
+
+ NOTE: We cannot use the R print modifier because we convert signed
+ comparison operators to unsigned ones. */
+ switch (code)
+ {
+ case LT: cmp_opstr = "qblt"; rcmp_opstr = "qbge"; break;
+ case LE: cmp_opstr = "qble"; rcmp_opstr = "qbgt"; break;
+ case GT: cmp_opstr = "qbgt"; rcmp_opstr = "qble"; break;
+ case GE: cmp_opstr = "qbge"; rcmp_opstr = "qblt"; break;
+ default: gcc_unreachable ();
+ }
+
+ /* OP2 is a constant unsigned byte - utilize this info to generate
+ optimized code. We can "remove half" of the op table above because
+ we know that OP2.b31 = 0 (remember that 0 <= OP2 <= 255). */
+ if (code == LT || code == LE)
+ {
+ if (is_near)
+ snprintf (buf, sizeof (buf),
+ "qbbs\t.+8, %%1, %d\n\t"
+ "%s\t%%l3, %%1, %%2",
+ regop_sign_bit_pos,
+ cmp_opstr);
+ else
+ snprintf (buf, sizeof (buf),
+ "qbbs\t.+12, %%1, %d\n\t"
+ "%s\t.+8, %%1, %%2\n\t"
+ "jmp\t%%%%label(%%l3)",
+ regop_sign_bit_pos,
+ rcmp_opstr);
+ }
+ else if (code == GT || code == GE)
+ {
+ if (is_near)
+ snprintf (buf, sizeof (buf),
+ "qbbs\t%%l3, %%1, %d\n\t"
+ "%s\t%%l3, %%1, %%2",
+ regop_sign_bit_pos,
+ cmp_opstr);
+ else
+ snprintf (buf, sizeof (buf),
+ "qbbs\t.+8, %%1, %d\n\t"
+ "%s\t.+8, %%1, %%2\n\t"
+ "jmp\t%%%%label(%%l3)",
+ regop_sign_bit_pos,
+ rcmp_opstr);
+ }
+ else
+ gcc_unreachable ();
+
+ return buf;
+}
+
+/*
+ Optimized version of pru_output_signed_cbranch_ubyteop2 for constant
+ zero second operand. */
+
+const char *
+pru_output_signed_cbranch_zeroop2 (rtx *operands, bool is_near)
+{
+ static char buf[1024];
+ enum rtx_code code = GET_CODE (operands[0]);
+ int regop_sign_bit_pos = sign_bit_position (operands[1]);
+
+ /* OP2 is a constant zero - utilize this info to simply check the
+ OP1 sign bit when comparing for LT or GE. */
+ if (code == LT)
+ {
+ if (is_near)
+ snprintf (buf, sizeof (buf),
+ "qbbs\t%%l3, %%1, %d\n\t",
+ regop_sign_bit_pos);
+ else
+ snprintf (buf, sizeof (buf),
+ "qbbc\t.+8, %%1, %d\n\t"
+ "jmp\t%%%%label(%%l3)",
+ regop_sign_bit_pos);
+ }
+ else if (code == GE)
+ {
+ if (is_near)
+ snprintf (buf, sizeof (buf),
+ "qbbc\t%%l3, %%1, %d\n\t",
+ regop_sign_bit_pos);
+ else
+ snprintf (buf, sizeof (buf),
+ "qbbs\t.+8, %%1, %d\n\t"
+ "jmp\t%%%%label(%%l3)",
+ regop_sign_bit_pos);
+ }
+ else
+ gcc_unreachable ();
+
+ return buf;
+}
+
+/* Addressing Modes. */
+
+/* Return true if register REGNO is a valid base register.
+ STRICT_P is true if REG_OK_STRICT is in effect. */
+
+bool
+pru_regno_ok_for_base_p (int regno, bool strict_p)
+{
+ if (!HARD_REGISTER_NUM_P (regno))
+ {
+ if (!strict_p)
+ return true;
+
+ if (!reg_renumber)
+ return false;
+
+ regno = reg_renumber[regno];
+ }
+
+ /* The fake registers will be eliminated to either the stack or
+ hard frame pointer, both of which are usually valid base registers.
+ Reload deals with the cases where the eliminated form isn't valid. */
+ return (GP_REG_P (regno)
+ || regno == FRAME_POINTER_REGNUM
+ || regno == ARG_POINTER_REGNUM);
+}
+
+/* Return true if given xbbo constant OFFSET is valid. */
+static bool
+pru_valid_const_ubyte_offset (machine_mode mode, HOST_WIDE_INT offset)
+{
+ bool valid = UBYTE_INT (offset);
+
+ /* Reload can split multi word accesses, so make sure we can address
+ the second word in a DI. */
+ if (valid && GET_MODE_SIZE (mode) > GET_MODE_SIZE (SImode))
+ valid = UBYTE_INT (offset + GET_MODE_SIZE (mode) - 1);
+
+ return valid;
+}
+
+/* Recognize a CTABLE base address. Return CTABLE entry index, or -1 if
+ * base was not found in the pragma-filled pru_ctable. */
+int
+pru_get_ctable_exact_base_index (unsigned HOST_WIDE_INT caddr)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE (pru_ctable); i++)
+ {
+ if (pru_ctable[i].valid && pru_ctable[i].base == caddr)
+ return i;
+ }
+ return -1;
+}
+
+
+/* Check if the given address can be addressed via CTABLE_BASE + UBYTE_OFFS,
+ and return the base CTABLE index if possible. */
+int
+pru_get_ctable_base_index (unsigned HOST_WIDE_INT caddr)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE (pru_ctable); i++)
+ {
+ if (pru_ctable[i].valid && IN_RANGE (caddr,
+ pru_ctable[i].base,
+ pru_ctable[i].base + 0xff))
+ return i;
+ }
+ return -1;
+}
+
+
+/* Return the offset from some CTABLE base for this address. */
+int
+pru_get_ctable_base_offset (unsigned HOST_WIDE_INT caddr)
+{
+ int i;
+
+ i = pru_get_ctable_base_index (caddr);
+ gcc_assert (i >= 0);
+
+ return caddr - pru_ctable[i].base;
+}
+
+/* Return true if the address expression formed by BASE + OFFSET is
+ valid. */
+static bool
+pru_valid_addr_expr_p (machine_mode mode, rtx base, rtx offset, bool strict_p)
+{
+ if (!strict_p && base != NULL_RTX && GET_CODE (base) == SUBREG)
+ base = SUBREG_REG (base);
+ if (!strict_p && offset != NULL_RTX && GET_CODE (offset) == SUBREG)
+ offset = SUBREG_REG (offset);
+
+ if (REG_P (base)
+ && pru_regno_ok_for_base_p (REGNO (base), strict_p)
+ && (offset == NULL_RTX
+ || (CONST_INT_P (offset)
+ && pru_valid_const_ubyte_offset (mode, INTVAL (offset)))
+ || (REG_P (offset)
+ && pru_regno_ok_for_index_p (REGNO (offset), strict_p))))
+ {
+ /* base register + register offset
+ * OR base register + UBYTE constant offset. */
+ return true;
+ }
+ else if (REG_P (base)
+ && pru_regno_ok_for_index_p (REGNO (base), strict_p)
+ && (offset != NULL_RTX && ctable_base_operand (offset, VOIDmode)))
+ {
+ /* base CTABLE constant base + register offset
+ * Note: GCC always puts the register as a first operand of PLUS. */
+ return true;
+ }
+ else if (CONST_INT_P (base)
+ && offset == NULL_RTX
+ && (ctable_addr_operand (base, VOIDmode)))
+ {
+ /* base CTABLE constant base + UBYTE constant offset. */
+ return true;
+ }
+ else
+ {
+ return false;
+ }
+}
+
+/* Implement TARGET_LEGITIMATE_ADDRESS_P. */
+static bool
+pru_legitimate_address_p (machine_mode mode,
+ rtx operand, bool strict_p)
+{
+ switch (GET_CODE (operand))
+ {
+ /* Direct. */
+ case SYMBOL_REF:
+ case LABEL_REF:
+ case CONST:
+ case CONST_DOUBLE:
+ return false;
+
+ case CONST_INT:
+ return ctable_addr_operand (operand, VOIDmode);
+
+ /* Register indirect. */
+ case REG:
+ return pru_regno_ok_for_base_p (REGNO (operand), strict_p);
+
+ /* Register indirect with displacement. */
+ case PLUS:
+ {
+ rtx op0 = XEXP (operand, 0);
+ rtx op1 = XEXP (operand, 1);
+
+ return (pru_valid_addr_expr_p (mode, op0, op1, strict_p)
+ || pru_valid_addr_expr_p (mode, op1, op0, strict_p));
+ }
+
+ default:
+ break;
+ }
+ return false;
+}
+
+/* Output assembly language related definitions. */
+
+/* Implement TARGET_ASM_CONSTRUCTOR. */
+static void
+pru_elf_asm_constructor (rtx symbol, int priority)
+{
+ char buf[23];
+ section *s;
+
+ if (priority == DEFAULT_INIT_PRIORITY)
+ snprintf (buf, sizeof (buf), ".init_array");
+ else
+ {
+ /* While priority is known to be in range [0, 65535], so 18 bytes
+ would be enough, the compiler might not know that. To avoid
+ -Wformat-truncation false positive, use a larger size. */
+ snprintf (buf, sizeof (buf), ".init_array.%.5u", priority);
+ }
+ s = get_section (buf, SECTION_WRITE | SECTION_NOTYPE, NULL);
+ switch_to_section (s);
+ assemble_aligned_integer (INIT_ARRAY_ENTRY_BYTES, symbol);
+}
+
+/* Implement TARGET_ASM_DESTRUCTOR. */
+static void
+pru_elf_asm_destructor (rtx symbol, int priority)
+{
+ char buf[23];
+ section *s;
+
+ if (priority == DEFAULT_INIT_PRIORITY)
+ snprintf (buf, sizeof (buf), ".fini_array");
+ else
+ {
+ /* While priority is known to be in range [0, 65535], so 18 bytes
+ would be enough, the compiler might not know that. To avoid
+ -Wformat-truncation false positive, use a larger size. */
+ snprintf (buf, sizeof (buf), ".fini_array.%.5u", priority);
+ }
+ s = get_section (buf, SECTION_WRITE | SECTION_NOTYPE, NULL);
+ switch_to_section (s);
+ assemble_aligned_integer (INIT_ARRAY_ENTRY_BYTES, symbol);
+}
+
+/* Map rtx_code to unsigned PRU branch op suffix. Callers must
+ handle sign comparison themselves for signed operations. */
+static const char *
+pru_comparison_str (enum rtx_code cond)
+{
+ switch (cond)
+ {
+ case NE: return "ne";
+ case EQ: return "eq";
+ case GEU: return "ge";
+ case GTU: return "gt";
+ case LEU: return "le";
+ case LTU: return "lt";
+ default: gcc_unreachable ();
+ }
+}
+
+/* Access some RTX as INT_MODE. If X is a CONST_FIXED we can get
+ the bit representation of X by "casting" it to CONST_INT. */
+
+static rtx
+pru_to_int_mode (rtx x)
+{
+ machine_mode mode = GET_MODE (x);
+
+ return VOIDmode == mode
+ ? x
+ : simplify_gen_subreg (int_mode_for_mode (mode).require (), x, mode, 0);
+}
+
+/* Translate between the MachineDescription notion
+ of 8-bit consecutive registers, to the PRU
+ assembler syntax of REGWORD[.SUBREG]. */
+static const char *
+pru_asm_regname (rtx op)
+{
+ static char canon_reg_names[3][LAST_GP_REG][8];
+ int speci, regi;
+
+ gcc_assert (REG_P (op));
+
+ if (!canon_reg_names[0][0][0])
+ {
+ for (regi = 0; regi < LAST_GP_REG; regi++)
+ for (speci = 0; speci < 3; speci++)
+ {
+ const int sz = (speci == 0) ? 1 : ((speci == 1) ? 2 : 4);
+ if ((regi + sz) > (32 * 4))
+ continue; /* Invalid entry. */
+
+ /* Construct the lookup table. */
+ const char *suffix = "";
+
+ switch ((sz << 8) | (regi % 4))
+ {
+ case (1 << 8) | 0: suffix = ".b0"; break;
+ case (1 << 8) | 1: suffix = ".b1"; break;
+ case (1 << 8) | 2: suffix = ".b2"; break;
+ case (1 << 8) | 3: suffix = ".b3"; break;
+ case (2 << 8) | 0: suffix = ".w0"; break;
+ case (2 << 8) | 1: suffix = ".w1"; break;
+ case (2 << 8) | 2: suffix = ".w2"; break;
+ case (4 << 8) | 0: suffix = ""; break;
+ default:
+ /* Invalid entry. */
+ continue;
+ }
+ sprintf (&canon_reg_names[speci][regi][0],
+ "r%d%s", regi / 4, suffix);
+ }
+ }
+
+ switch (GET_MODE_SIZE (GET_MODE (op)))
+ {
+ case 1: speci = 0; break;
+ case 2: speci = 1; break;
+ case 4: speci = 2; break;
+ case 8: speci = 2; break; /* Existing GCC test cases are not using %F. */
+ default: gcc_unreachable ();
+ }
+ regi = REGNO (op);
+ gcc_assert (regi < LAST_GP_REG);
+ gcc_assert (canon_reg_names[speci][regi][0]);
+
+ return &canon_reg_names[speci][regi][0];
+}
+
+/* Print the operand OP to file stream FILE modified by LETTER.
+ LETTER can be one of:
+
+ b: prints the register byte start (used by LBBO/SBBO)
+ B: prints 'c' or 'b' for CTABLE or REG base in a memory address
+ F: Full 32-bit register.
+ H: Higher 16-bits of a const_int operand
+ L: Lower 16-bits of a const_int operand
+ N: prints next 32-bit register (upper 32bits of a 64bit REG couple)
+ P: prints swapped condition.
+ Q: prints swapped and reversed condition.
+ R: prints reversed condition.
+ S: print operand mode size (but do not print the operand itself)
+ T: print exact_log2 () for const_int operands
+ V: print exact_log2 () of negated const_int operands
+ w: Lower 32-bits of a const_int operand
+ W: Upper 32-bits of a const_int operand
+ y: print the next 8-bit register (regardless of op size)
+ z: print the second next 8-bit register (regardless of op size)
+*/
+static void
+pru_print_operand (FILE *file, rtx op, int letter)
+{
+
+ switch (letter)
+ {
+ case 'S':
+ fprintf (file, "%d", GET_MODE_SIZE (GET_MODE (op)));
+ return;
+
+ default:
+ break;
+ }
+
+ if (comparison_operator (op, VOIDmode))
+ {
+ enum rtx_code cond = GET_CODE (op);
+ gcc_assert (!pru_signed_cmp_operator (op, VOIDmode));
+
+ switch (letter)
+ {
+ case 0:
+ fprintf (file, "%s", pru_comparison_str (cond));
+ return;
+ case 'P':
+ fprintf (file, "%s", pru_comparison_str (swap_condition (cond)));
+ return;
+ case 'Q':
+ cond = swap_condition (cond);
+ /* Fall through to reverse. */
+ case 'R':
+ fprintf (file, "%s", pru_comparison_str (reverse_condition (cond)));
+ return;
+ }
+ }
+
+ switch (GET_CODE (op))
+ {
+ case REG:
+ if (letter == 0)
+ {
+ fprintf (file, "%s", pru_asm_regname (op));
+ return;
+ }
+ else if (letter == 'b')
+ {
+ gcc_assert (REGNO (op) <= LAST_NONIO_GP_REG);
+ fprintf (file, "r%d.b%d", REGNO (op) / 4, REGNO (op) % 4);
+ return;
+ }
+ else if (letter == 'F')
+ {
+ gcc_assert (REGNO (op) <= LAST_NONIO_GP_REG);
+ gcc_assert (REGNO (op) % 4 == 0);
+ fprintf (file, "r%d", REGNO (op) / 4);
+ return;
+ }
+ else if (letter == 'N')
+ {
+ gcc_assert (REGNO (op) <= LAST_NONIO_GP_REG);
+ gcc_assert (REGNO (op) % 4 == 0);
+ fprintf (file, "r%d", REGNO (op) / 4 + 1);
+ return;
+ }
+ else if (letter == 'y')
+ {
+ gcc_assert (REGNO (op) <= LAST_NONIO_GP_REG - 1);
+ fprintf (file, "%s", reg_names[REGNO (op) + 1]);
+ return;
+ }
+ else if (letter == 'z')
+ {
+ gcc_assert (REGNO (op) <= LAST_NONIO_GP_REG - 2);
+ fprintf (file, "%s", reg_names[REGNO (op) + 2]);
+ return;
+ }
+ break;
+
+ case CONST_INT:
+ if (letter == 'H')
+ {
+ HOST_WIDE_INT val = INTVAL (op);
+ val = (val >> 16) & 0xFFFF;
+ output_addr_const (file, gen_int_mode (val, SImode));
+ return;
+ }
+ else if (letter == 'L')
+ {
+ HOST_WIDE_INT val = INTVAL (op);
+ val &= 0xFFFF;
+ output_addr_const (file, gen_int_mode (val, SImode));
+ return;
+ }
+ else if (letter == 'T')
+ {
+ /* The predicate should have already validated the 1-high-bit
+ requirement. Use CTZ here to deal with constant's sign
+ extension. */
+ HOST_WIDE_INT val = wi::ctz (INTVAL (op));
+ gcc_assert (val >= 0 && val <= 31);
+ output_addr_const (file, gen_int_mode (val, SImode));
+ return;
+ }
+ else if (letter == 'V')
+ {
+ HOST_WIDE_INT val = wi::ctz (~INTVAL (op));
+ gcc_assert (val >= 0 && val <= 31);
+ output_addr_const (file, gen_int_mode (val, SImode));
+ return;
+ }
+ else if (letter == 'w')
+ {
+ HOST_WIDE_INT val = INTVAL (op) & 0xffffffff;
+ output_addr_const (file, gen_int_mode (val, SImode));
+ return;
+ }
+ else if (letter == 'W')
+ {
+ HOST_WIDE_INT val = (INTVAL (op) >> 32) & 0xffffffff;
+ output_addr_const (file, gen_int_mode (val, SImode));
+ return;
+ }
+ /* Else, fall through. */
+
+ case CONST:
+ case LABEL_REF:
+ case SYMBOL_REF:
+ if (letter == 0)
+ {
+ output_addr_const (file, op);
+ return;
+ }
+ break;
+
+ case CONST_FIXED:
+ {
+ HOST_WIDE_INT ival = INTVAL (pru_to_int_mode (op));
+ if (letter != 0)
+ output_operand_lossage ("Unsupported code '%c' for fixed-point:",
+ letter);
+ fprintf (file, HOST_WIDE_INT_PRINT_DEC, ival);
+ return;
+ }
+ break;
+
+ case CONST_DOUBLE:
+ if (letter == 0)
+ {
+ long val;
+
+ if (GET_MODE (op) != SFmode)
+ fatal_insn ("internal compiler error. Unknown mode:", op);
+ REAL_VALUE_TO_TARGET_SINGLE (*CONST_DOUBLE_REAL_VALUE (op), val);
+ fprintf (file, "0x%lx", val);
+ return;
+ }
+ else if (letter == 'w' || letter == 'W')
+ {
+ long t[2];
+ REAL_VALUE_TO_TARGET_DOUBLE (*CONST_DOUBLE_REAL_VALUE (op), t);
+ fprintf (file, "0x%lx", t[letter == 'w' ? 0 : 1]);
+ return;
+ }
+ else
+ {
+ gcc_unreachable ();
+ }
+ break;
+
+ case SUBREG:
+ case MEM:
+ if (letter == 0)
+ {
+ output_address (VOIDmode, op);
+ return;
+ }
+ else if (letter == 'B')
+ {
+ rtx base = XEXP (op, 0);
+ if (GET_CODE (base) == PLUS)
+ {
+ rtx op0 = XEXP (base, 0);
+ rtx op1 = XEXP (base, 1);
+
+ /* PLUS cannot have two constant operands, so one
+ of them must be a REG, hence we must check for an
+ exact base address. */
+ if (ctable_base_operand (op0, VOIDmode)
+ || ctable_base_operand (op1, VOIDmode))
+ {
+ fprintf (file, "c");
+ return;
+ }
+ else if (REG_P (op0) || REG_P (op1))
+ {
+ fprintf (file, "b");
+ return;
+ }
+ else
+ gcc_unreachable ();
+ }
+ else if (REG_P (base))
+ {
+ fprintf (file, "b");
+ return;
+ }
+ else if (ctable_addr_operand (base, VOIDmode))
+ {
+ fprintf (file, "c");
+ return;
+ }
+ else
+ gcc_unreachable ();
+ }
+ break;
+
+ case CODE_LABEL:
+ if (letter == 0)
+ {
+ output_addr_const (file, op);
+ return;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ output_operand_lossage ("Unsupported operand %s for code '%c'",
+ GET_RTX_NAME (GET_CODE (op)), letter);
+ gcc_unreachable ();
+}
+
+/* Implement TARGET_PRINT_OPERAND_ADDRESS. */
+static void
+pru_print_operand_address (FILE *file, machine_mode mode, rtx op)
+{
+ if (GET_CODE (op) != REG && CONSTANT_ADDRESS_P (op)
+ && text_segment_operand (op, VOIDmode))
+ {
+ fprintf (stderr, "Unexpectred text address?\n");
+ debug_rtx (op);
+ gcc_unreachable ();
+ }
+
+ switch (GET_CODE (op))
+ {
+ case CONST:
+ case LABEL_REF:
+ case CONST_DOUBLE:
+ case SYMBOL_REF:
+ break;
+
+ case CONST_INT:
+ {
+ unsigned HOST_WIDE_INT caddr = INTVAL (op);
+ int base = pru_get_ctable_base_index (caddr);
+ int offs = pru_get_ctable_base_offset (caddr);
+ gcc_assert (base >= 0);
+ fprintf (file, "%d, %d", base, offs);
+ return;
+ }
+ break;
+
+ case PLUS:
+ {
+ int base;
+ rtx op0 = XEXP (op, 0);
+ rtx op1 = XEXP (op, 1);
+
+ if (REG_P (op0) && CONST_INT_P (op1)
+ && pru_get_ctable_exact_base_index (INTVAL (op1)) >= 0)
+ {
+ base = pru_get_ctable_exact_base_index (INTVAL (op1));
+ fprintf (file, "%d, %s", base, pru_asm_regname (op0));
+ return;
+ }
+ else if (REG_P (op1) && CONST_INT_P (op0)
+ && pru_get_ctable_exact_base_index (INTVAL (op0)) >= 0)
+ {
+ base = pru_get_ctable_exact_base_index (INTVAL (op0));
+ fprintf (file, "%d, %s", base, pru_asm_regname (op1));
+ return;
+ }
+ else if (REG_P (op0) && CONSTANT_P (op1))
+ {
+ fprintf (file, "%s, ", pru_asm_regname (op0));
+ output_addr_const (file, op1);
+ return;
+ }
+ else if (REG_P (op1) && CONSTANT_P (op0))
+ {
+ fprintf (file, "%s, ", pru_asm_regname (op1));
+ output_addr_const (file, op0);
+ return;
+ }
+ else if (REG_P (op1) && REG_P (op0))
+ {
+ fprintf (file, "%s, %s", pru_asm_regname (op0),
+ pru_asm_regname (op1));
+ return;
+ }
+ }
+ break;
+
+ case REG:
+ fprintf (file, "%s, 0", pru_asm_regname (op));
+ return;
+
+ case MEM:
+ {
+ rtx base = XEXP (op, 0);
+ pru_print_operand_address (file, mode, base);
+ return;
+ }
+ default:
+ break;
+ }
+
+ fprintf (stderr, "Missing way to print address\n");
+ debug_rtx (op);
+ gcc_unreachable ();
+}
+
+/* Implement TARGET_ASM_FUNCTION_PROLOGUE. */
+static void
+pru_asm_function_prologue (FILE *file)
+{
+ if (flag_verbose_asm || flag_debug_asm)
+ {
+ pru_compute_frame_layout ();
+ pru_dump_frame_layout (file);
+ }
+}
+
+/* Implement `TARGET_ASM_INTEGER'.
+ Target hook for assembling integer objects. PRU version needs
+ special handling for references to pmem. Code copied from AVR. */
+
+static bool
+pru_assemble_integer (rtx x, unsigned int size, int aligned_p)
+{
+ if (size == POINTER_SIZE / BITS_PER_UNIT
+ && aligned_p
+ && text_segment_operand (x, VOIDmode))
+ {
+ fputs ("\t.4byte\t%pmem(", asm_out_file);
+ output_addr_const (asm_out_file, x);
+ fputs (")\n", asm_out_file);
+
+ return true;
+ }
+ else if (size == INIT_ARRAY_ENTRY_BYTES
+ && aligned_p
+ && text_segment_operand (x, VOIDmode))
+ {
+ fputs ("\t.2byte\t%pmem(", asm_out_file);
+ output_addr_const (asm_out_file, x);
+ fputs (")\n", asm_out_file);
+
+ return true;
+ }
+ else
+ {
+ return default_assemble_integer (x, size, aligned_p);
+ }
+}
+
+/* Implement TARGET_ASM_FILETARGET_ASM_FILE_START_START. */
+
+static void
+pru_file_start (void)
+{
+ default_file_start ();
+
+ /* Compiler will take care of placing %label, so there is no
+ need to confuse users with this warning. */
+ fprintf (asm_out_file, "\t.set no_warn_regname_label\n");
+}
+
+/* Function argument related. */
+
+/* Return the number of bytes needed for storing an argument with
+ the given MODE and TYPE. */
+static int
+pru_function_arg_size (machine_mode mode, const_tree type)
+{
+ HOST_WIDE_INT param_size;
+
+ if (mode == BLKmode)
+ param_size = int_size_in_bytes (type);
+ else
+ param_size = GET_MODE_SIZE (mode);
+
+ /* Convert to words (round up). */
+ param_size = (UNITS_PER_WORD - 1 + param_size) / UNITS_PER_WORD;
+ gcc_assert (param_size >= 0);
+
+ return param_size;
+}
+
+/* Check if argument with the given size must be
+ passed/returned in a register.
+
+ Reference:
+ https://e2e.ti.com/support/development_tools/compiler/f/343/p/650176/2393029
+
+ Arguments other than 8/16/24/32/64bits are passed on stack. */
+static bool
+pru_arg_in_reg_bysize (size_t sz)
+{
+ return sz == 1 || sz == 2 || sz == 3 || sz == 4 || sz == 8;
+}
+
+/* Helper function to get the starting storage HW register for an argument,
+ or -1 if it must be passed on stack. The cum_v state is not changed. */
+static int
+pru_function_arg_regi (cumulative_args_t cum_v,
+ machine_mode mode, const_tree type,
+ bool named)
+{
+ CUMULATIVE_ARGS *cum = get_cumulative_args (cum_v);
+ size_t argsize = pru_function_arg_size (mode, type);
+ size_t i, bi;
+ int regi = -1;
+
+ if (!pru_arg_in_reg_bysize (argsize))
+ return -1;
+
+ if (!named)
+ return -1;
+
+ /* Find the first available slot that fits. Yes, that's the PRU ABI. */
+ for (i = 0; regi < 0 && i < ARRAY_SIZE (cum->regs_used); i++)
+ {
+ if (mode == BLKmode)
+ {
+ /* Structs are passed, beginning at a full register. */
+ if ((i % 4) != 0)
+ continue;
+ }
+ else
+ {
+ /* Scalar arguments. */
+
+ /* Ensure SI and DI arguments are stored in full registers only. */
+ if ((argsize >= 4) && (i % 4) != 0)
+ continue;
+
+ /* rX.w0/w1/w2 are OK. But avoid spreading the second byte
+ into a different full register. */
+ if (argsize == 2 && (i % 4) == 3)
+ continue;
+ }
+
+ for (bi = 0;
+ bi < argsize && (bi + i) < ARRAY_SIZE (cum->regs_used);
+ bi++)
+ {
+ if (cum->regs_used[bi + i])
+ break;
+ }
+ if (bi == argsize)
+ regi = FIRST_ARG_REGNO + i;
+ }
+
+ return regi;
+}
+
+/* Mark CUM_V that a function argument will occupy HW register slot starting
+ at REGI. The number of consecutive 8-bit HW registers marked as occupied
+ depends on the MODE and TYPE of the argument. */
+static void
+pru_function_arg_regi_mark_slot (int regi,
+ cumulative_args_t cum_v,
+ machine_mode mode, const_tree type,
+ bool named)
+{
+ CUMULATIVE_ARGS *cum = get_cumulative_args (cum_v);
+ HOST_WIDE_INT param_size = pru_function_arg_size (mode, type);
+
+ gcc_assert (named);
+
+ /* Mark all byte sub-registers occupied by argument as used. */
+ while (param_size--)
+ {
+ gcc_assert (regi >= FIRST_ARG_REGNO && regi <= LAST_ARG_REGNO);
+ gcc_assert (!cum->regs_used[regi - FIRST_ARG_REGNO]);
+ cum->regs_used[regi - FIRST_ARG_REGNO] = true;
+ regi++;
+ }
+}
+
+/* Define where to put the arguments to a function. Value is zero to
+ push the argument on the stack, or a hard register in which to
+ store the argument.
+
+ MODE is the argument's machine mode.
+ TYPE is the data type of the argument (as a tree).
+ This is null for libcalls where that information may
+ not be available.
+ CUM is a variable of type CUMULATIVE_ARGS which gives info about
+ the preceding args and about the function being called.
+ NAMED is nonzero if this argument is a named parameter
+ (otherwise it is an extra parameter matching an ellipsis). */
+
+static rtx
+pru_function_arg (cumulative_args_t cum_v, machine_mode mode,
+ const_tree type,
+ bool named)
+{
+ rtx return_rtx = NULL_RTX;
+ int regi = pru_function_arg_regi (cum_v, mode, type, named);
+
+ if (regi >= 0)
+ return_rtx = gen_rtx_REG (mode, regi);
+
+ return return_rtx;
+}
+
+/* Return number of bytes, at the beginning of the argument, that must be
+ put in registers. 0 is the argument is entirely in registers or entirely
+ in memory. */
+
+static int
+pru_arg_partial_bytes (cumulative_args_t cum_v ATTRIBUTE_UNUSED,
+ machine_mode mode ATTRIBUTE_UNUSED,
+ tree type ATTRIBUTE_UNUSED,
+ bool named ATTRIBUTE_UNUSED)
+{
+ return 0;
+}
+
+/* Update the data in CUM to advance over an argument of mode MODE
+ and data type TYPE; TYPE is null for libcalls where that information
+ may not be available. */
+
+static void
+pru_function_arg_advance (cumulative_args_t cum_v, machine_mode mode,
+ const_tree type,
+ bool named)
+{
+ int regi = pru_function_arg_regi (cum_v, mode, type, named);
+
+ if (regi >= 0)
+ pru_function_arg_regi_mark_slot (regi, cum_v, mode, type, named);
+}
+
+/* Implement TARGET_FUNCTION_VALUE. */
+static rtx
+pru_function_value (const_tree ret_type, const_tree fn ATTRIBUTE_UNUSED,
+ bool outgoing ATTRIBUTE_UNUSED)
+{
+ return gen_rtx_REG (TYPE_MODE (ret_type), FIRST_RETVAL_REGNO);
+}
+
+/* Implement TARGET_LIBCALL_VALUE. */
+static rtx
+pru_libcall_value (machine_mode mode, const_rtx fun ATTRIBUTE_UNUSED)
+{
+ return gen_rtx_REG (mode, FIRST_RETVAL_REGNO);
+}
+
+/* Implement TARGET_FUNCTION_VALUE_REGNO_P. */
+static bool
+pru_function_value_regno_p (const unsigned int regno)
+{
+ return regno == FIRST_RETVAL_REGNO;
+}
+
+/* Implement TARGET_RETURN_IN_MEMORY. */
+bool
+pru_return_in_memory (const_tree type, const_tree fntype ATTRIBUTE_UNUSED)
+{
+ bool in_memory = (!pru_arg_in_reg_bysize (int_size_in_bytes (type))
+ || int_size_in_bytes (type) == -1);
+
+ return in_memory;
+}
+
+/* Implement TARGET_CAN_USE_DOLOOP_P. */
+
+static bool
+pru_can_use_doloop_p (const widest_int &, const widest_int &iterations_max,
+ unsigned int loop_depth, bool)
+{
+ /* Considering limitations in the hardware, only use doloop
+ for innermost loops which must be entered from the top. */
+ if (loop_depth > 1)
+ return false;
+ /* PRU internal loop counter is 16bits wide. Remember that iterations_max
+ holds the maximum number of loop latch executions, while PRU loop
+ instruction needs the count of loop body executions. */
+ if (iterations_max == 0 || wi::geu_p (iterations_max, 0xffff))
+ return false;
+
+ return true;
+}
+
+/* NULL if INSN insn is valid within a low-overhead loop.
+ Otherwise return why doloop cannot be applied. */
+
+static const char *
+pru_invalid_within_doloop (const rtx_insn *insn)
+{
+ if (CALL_P (insn))
+ return "Function call in the loop.";
+
+ if (JUMP_P (insn) && INSN_CODE (insn) == CODE_FOR_return)
+ return "Return from a call instruction in the loop.";
+
+ if (NONDEBUG_INSN_P (insn)
+ && INSN_CODE (insn) < 0
+ && (GET_CODE (PATTERN (insn)) == ASM_INPUT
+ || asm_noperands (PATTERN (insn)) >= 0))
+ return "Loop contains asm statement.";
+
+ return NULL;
+}
+
+
+/* Figure out where to put LABEL, which is the label for a repeat loop.
+ The loop ends just before LAST_INSN. If SHARED, insns other than the
+ "repeat" might use LABEL to jump to the loop's continuation point.
+
+ Return the last instruction in the adjusted loop. */
+
+static rtx_insn *
+pru_insert_loop_label_last (rtx_insn *last_insn, rtx_code_label *label,
+ bool shared)
+{
+ rtx_insn *next, *prev;
+ int count = 0, code, icode;
+
+ if (dump_file)
+ fprintf (dump_file, "considering end of repeat loop at insn %d\n",
+ INSN_UID (last_insn));
+
+ /* Set PREV to the last insn in the loop. */
+ prev = PREV_INSN (last_insn);
+
+ /* Set NEXT to the next insn after the loop label. */
+ next = last_insn;
+ if (!shared)
+ while (prev != 0)
+ {
+ code = GET_CODE (prev);
+ if (code == CALL_INSN || code == CODE_LABEL || code == BARRIER)
+ break;
+
+ if (INSN_P (prev))
+ {
+ if (GET_CODE (PATTERN (prev)) == SEQUENCE)
+ prev = as_a <rtx_insn *> (XVECEXP (PATTERN (prev), 0, 1));
+
+ /* Other insns that should not be in the last two opcodes. */
+ icode = recog_memoized (prev);
+ if (icode < 0
+ || icode == CODE_FOR_pruloophi
+ || icode == CODE_FOR_pruloopsi)
+ break;
+
+ count++;
+ next = prev;
+ if (dump_file)
+ print_rtl_single (dump_file, next);
+ if (count == 2)
+ break;
+ }
+ prev = PREV_INSN (prev);
+ }
+
+ /* Insert the nops. */
+ if (dump_file && count < 2)
+ fprintf (dump_file, "Adding %d nop%s inside loop\n\n",
+ 2 - count, count == 1 ? "" : "s");
+
+ for (; count < 2; count++)
+ emit_insn_before (gen_nop (), last_insn);
+
+ /* Insert the label. */
+ emit_label_before (label, last_insn);
+
+ return last_insn;
+}
+
+/* If IS_END is false, expand a canonical doloop_begin RTL into the
+ PRU-specific doloop_begin_internal. Otherwise expand doloop_end to
+ doloop_end_internal. */
+void
+pru_emit_doloop (rtx *operands, int is_end)
+{
+ rtx tag;
+
+ if (cfun->machine->doloop_tags == 0
+ || cfun->machine->doloop_tag_from_end == is_end)
+ {
+ cfun->machine->doloop_tags++;
+ cfun->machine->doloop_tag_from_end = is_end;
+ }
+
+ tag = GEN_INT (cfun->machine->doloop_tags - 1);
+ machine_mode opmode = GET_MODE (operands[0]);
+ if (is_end)
+ {
+ if (opmode == HImode)
+ emit_jump_insn (gen_doloop_end_internalhi (operands[0],
+ operands[1], tag));
+ else if (opmode == SImode)
+ emit_jump_insn (gen_doloop_end_internalsi (operands[0],
+ operands[1], tag));
+ else
+ gcc_unreachable ();
+ }
+ else
+ {
+ if (opmode == HImode)
+ emit_insn (gen_doloop_begin_internalhi (operands[0], operands[0], tag));
+ else if (opmode == SImode)
+ emit_insn (gen_doloop_begin_internalsi (operands[0], operands[0], tag));
+ else
+ gcc_unreachable ();
+ }
+}
+
+
+/* Code for converting doloop_begins and doloop_ends into valid
+ PRU instructions. Idea and code snippets borrowed from mep port.
+
+ A doloop_begin is just a placeholder:
+
+ $count = unspec ($count)
+
+ where $count is initially the number of iterations.
+ doloop_end has the form:
+
+ if (--$count == 0) goto label
+
+ The counter variable is private to the doloop insns, nothing else
+ relies on its value.
+
+ There are three cases, in decreasing order of preference:
+
+ 1. A loop has exactly one doloop_begin and one doloop_end.
+ The doloop_end branches to the first instruction after
+ the doloop_begin.
+
+ In this case we can replace the doloop_begin with a LOOP
+ instruction and remove the doloop_end. I.e.:
+
+ $count1 = unspec ($count1)
+ label:
+ ...
+ if (--$count2 != 0) goto label
+
+ becomes:
+
+ LOOP end_label,$count1
+ label:
+ ...
+ end_label:
+ # end loop
+
+ 2. As for (1), except there are several doloop_ends. One of them
+ (call it X) falls through to a label L. All the others fall
+ through to branches to L.
+
+ In this case, we remove X and replace the other doloop_ends
+ with branches to the LOOP label. For example:
+
+ $count1 = unspec ($count1)
+ label:
+ ...
+ if (--$count1 != 0) goto label
+ end_label:
+ ...
+ if (--$count2 != 0) goto label
+ goto end_label
+
+ becomes:
+
+ LOOP end_label,$count1
+ label:
+ ...
+ end_label:
+ # end repeat
+ ...
+ goto end_label
+
+ 3. The fallback case. Replace doloop_begins with:
+
+ $count = $count
+
+ Replace doloop_ends with the equivalent of:
+
+ $count = $count - 1
+ if ($count != 0) goto loop_label
+
+ */
+
+/* A structure describing one doloop_begin. */
+struct pru_doloop_begin {
+ /* The next doloop_begin with the same tag. */
+ struct pru_doloop_begin *next;
+
+ /* The instruction itself. */
+ rtx_insn *insn;
+
+ /* The initial counter value. */
+ rtx loop_count;
+
+ /* The counter register. */
+ rtx counter;
+};
+
+/* A structure describing a doloop_end. */
+struct pru_doloop_end {
+ /* The next doloop_end with the same loop tag. */
+ struct pru_doloop_end *next;
+
+ /* The instruction itself. */
+ rtx_insn *insn;
+
+ /* The first instruction after INSN when the branch isn't taken. */
+ rtx_insn *fallthrough;
+
+ /* The location of the counter value. Since doloop_end_internal is a
+ jump instruction, it has to allow the counter to be stored anywhere
+ (any non-fixed register). */
+ rtx counter;
+
+ /* The target label (the place where the insn branches when the counter
+ isn't zero). */
+ rtx label;
+
+ /* A scratch register. Only available when COUNTER isn't stored
+ in a general register. */
+ rtx scratch;
+};
+
+
+/* One do-while loop. */
+struct pru_doloop {
+ /* All the doloop_begins for this loop (in no particular order). */
+ struct pru_doloop_begin *begin;
+
+ /* All the doloop_ends. When there is more than one, arrange things
+ so that the first one is the most likely to be X in case (2) above. */
+ struct pru_doloop_end *end;
+};
+
+
+/* Return true if LOOP can be converted into LOOP form
+ (that is, if it matches cases (1) or (2) above). */
+
+static bool
+pru_repeat_loop_p (struct pru_doloop *loop)
+{
+ struct pru_doloop_end *end;
+ rtx_insn *fallthrough;
+
+ /* There must be exactly one doloop_begin and at least one doloop_end. */
+ if (loop->begin == 0 || loop->end == 0 || loop->begin->next != 0)
+ return false;
+
+ /* The first doloop_end (X) must branch back to the insn after
+ the doloop_begin. */
+ if (prev_real_insn (as_a<rtx_insn *> (loop->end->label)) != loop->begin->insn)
+ return false;
+
+ /* Check that the first doloop_end (X) can actually reach
+ doloop_begin () with U8_PCREL relocation for LOOP instruction. */
+ if (get_attr_length (loop->end->insn) != 4)
+ return false;
+
+ /* All the other doloop_ends must branch to the same place as X.
+ When the branch isn't taken, they must jump to the instruction
+ after X. */
+ fallthrough = loop->end->fallthrough;
+ for (end = loop->end->next; end != 0; end = end->next)
+ if (end->label != loop->end->label
+ || !simplejump_p (end->fallthrough)
+ || fallthrough
+ != next_real_insn (JUMP_LABEL_AS_INSN (end->fallthrough)))
+ return false;
+
+ return true;
+}
+
+
+/* The main repeat reorg function. See comment above for details. */
+
+static void
+pru_reorg_loop (rtx_insn *insns)
+{
+ rtx_insn *insn;
+ struct pru_doloop *loops, *loop;
+ struct pru_doloop_begin *begin;
+ struct pru_doloop_end *end;
+ size_t tmpsz;
+
+ /* Quick exit if we haven't created any loops. */
+ if (cfun->machine->doloop_tags == 0)
+ return;
+
+ /* Create an array of pru_doloop structures. */
+ tmpsz = sizeof (loops[0]) * cfun->machine->doloop_tags;
+ loops = (struct pru_doloop *) alloca (tmpsz);
+ memset (loops, 0, sizeof (loops[0]) * cfun->machine->doloop_tags);
+
+ /* Search the function for do-while insns and group them by loop tag. */
+ for (insn = insns; insn; insn = NEXT_INSN (insn))
+ if (INSN_P (insn))
+ switch (recog_memoized (insn))
+ {
+ case CODE_FOR_doloop_begin_internalhi:
+ case CODE_FOR_doloop_begin_internalsi:
+ insn_extract (insn);
+ loop = &loops[INTVAL (recog_data.operand[2])];
+
+ tmpsz = sizeof (struct pru_doloop_begin);
+ begin = (struct pru_doloop_begin *) alloca (tmpsz);
+ begin->next = loop->begin;
+ begin->insn = insn;
+ begin->loop_count = recog_data.operand[1];
+ begin->counter = recog_data.operand[0];
+
+ loop->begin = begin;
+ break;
+
+ case CODE_FOR_doloop_end_internalhi:
+ case CODE_FOR_doloop_end_internalsi:
+ insn_extract (insn);
+ loop = &loops[INTVAL (recog_data.operand[2])];
+
+ tmpsz = sizeof (struct pru_doloop_end);
+ end = (struct pru_doloop_end *) alloca (tmpsz);
+ end->insn = insn;
+ end->fallthrough = next_real_insn (insn);
+ end->counter = recog_data.operand[0];
+ end->label = recog_data.operand[1];
+ end->scratch = recog_data.operand[3];
+
+ /* If this insn falls through to an unconditional jump,
+ give it a lower priority than the others. */
+ if (loop->end != 0 && simplejump_p (end->fallthrough))
+ {
+ end->next = loop->end->next;
+ loop->end->next = end;
+ }
+ else
+ {
+ end->next = loop->end;
+ loop->end = end;
+ }
+ break;
+ }
+
+ /* Convert the insns for each loop in turn. */
+ for (loop = loops; loop < loops + cfun->machine->doloop_tags; loop++)
+ if (pru_repeat_loop_p (loop))
+ {
+ /* Case (1) or (2). */
+ rtx_code_label *repeat_label;
+ rtx label_ref;
+
+ /* Create a new label for the repeat insn. */
+ repeat_label = gen_label_rtx ();
+
+ /* Replace the doloop_begin with a repeat. We get rid
+ of the iteration register because LOOP instruction
+ will utilize an internal for the PRU core LOOP register. */
+ label_ref = gen_rtx_LABEL_REF (VOIDmode, repeat_label);
+ machine_mode loop_mode = GET_MODE (loop->begin->loop_count);
+ if (loop_mode == HImode)
+ emit_insn_before (gen_pruloophi (loop->begin->loop_count, label_ref),
+ loop->begin->insn);
+ else if (loop_mode == SImode)
+ {
+ rtx loop_rtx = gen_pruloopsi (loop->begin->loop_count, label_ref);
+ emit_insn_before (loop_rtx, loop->begin->insn);
+ }
+ else if (loop_mode == VOIDmode)
+ {
+ gcc_assert (CONST_INT_P (loop->begin->loop_count));
+ gcc_assert (UBYTE_INT ( INTVAL (loop->begin->loop_count)));
+ rtx loop_rtx = gen_pruloopsi (loop->begin->loop_count, label_ref);
+ emit_insn_before (loop_rtx, loop->begin->insn);
+ }
+ else
+ gcc_unreachable ();
+ delete_insn (loop->begin->insn);
+
+ /* Insert the repeat label before the first doloop_end.
+ Fill the gap with nops if LOOP insn is less than 2
+ instructions away than loop->end. */
+ pru_insert_loop_label_last (loop->end->insn, repeat_label,
+ loop->end->next != 0);
+
+ /* Emit a pruloop_end (to improve the readability of the output). */
+ emit_insn_before (gen_pruloop_end (), loop->end->insn);
+
+ /* HACK: TODO: This is usually not needed, but is required for
+ a few rare cases where a JUMP that breaks the loop
+ references the LOOP_END address. In other words, since
+ we're missing a real "loop_end" instruction, a loop "break"
+ may accidentally reference the loop end itself, and thus
+ continuing the cycle. */
+ for (insn = NEXT_INSN (loop->end->insn);
+ insn != next_real_insn (loop->end->insn);
+ insn = NEXT_INSN (insn))
+ {
+ if (LABEL_P (insn) && LABEL_NUSES (insn) > 0)
+ emit_insn_before (gen_nop_loop_guard (), loop->end->insn);
+ }
+
+ /* Delete the first doloop_end. */
+ delete_insn (loop->end->insn);
+
+ /* Replace the others with branches to REPEAT_LABEL. */
+ for (end = loop->end->next; end != 0; end = end->next)
+ {
+ rtx_insn *newjmp;
+ newjmp = emit_jump_insn_before (gen_jump (repeat_label), end->insn);
+ JUMP_LABEL (newjmp) = repeat_label;
+ delete_insn (end->insn);
+ delete_insn (end->fallthrough);
+ }
+ }
+ else
+ {
+ /* Case (3). First replace all the doloop_begins with setting
+ the HW register used for loop counter. */
+ for (begin = loop->begin; begin != 0; begin = begin->next)
+ {
+ insn = gen_move_insn (copy_rtx (begin->counter),
+ copy_rtx (begin->loop_count));
+ emit_insn_before (insn, begin->insn);
+ delete_insn (begin->insn);
+ }
+
+ /* Replace all the doloop_ends with decrement-and-branch sequences. */
+ for (end = loop->end; end != 0; end = end->next)
+ {
+ rtx reg;
+
+ start_sequence ();
+
+ /* Load the counter value into a general register. */
+ reg = end->counter;
+ if (!REG_P (reg) || REGNO (reg) > LAST_NONIO_GP_REG)
+ {
+ reg = end->scratch;
+ emit_move_insn (copy_rtx (reg), copy_rtx (end->counter));
+ }
+
+ /* Decrement the counter. */
+ emit_insn (gen_add3_insn (copy_rtx (reg), copy_rtx (reg),
+ constm1_rtx));
+
+ /* Copy it back to its original location. */
+ if (reg != end->counter)
+ emit_move_insn (copy_rtx (end->counter), copy_rtx (reg));
+
+ /* Jump back to the start label. */
+ insn = emit_jump_insn (gen_cbranchsi4 (gen_rtx_NE (VOIDmode, reg,
+ const0_rtx),
+ reg,
+ const0_rtx,
+ end->label));
+
+ JUMP_LABEL (insn) = end->label;
+ LABEL_NUSES (end->label)++;
+
+ /* Emit the whole sequence before the doloop_end. */
+ insn = get_insns ();
+ end_sequence ();
+ emit_insn_before (insn, end->insn);
+
+ /* Delete the doloop_end. */
+ delete_insn (end->insn);
+ }
+ }
+}
+
+/* Implement TARGET_MACHINE_DEPENDENT_REORG. */
+static void
+pru_reorg (void)
+{
+ rtx_insn *insns = get_insns ();
+
+ compute_bb_for_insn ();
+ df_analyze ();
+
+ /* Need correct insn lengths for allowing LOOP instruction
+ emitting due to U8_PCREL limitations. */
+ shorten_branches (get_insns ());
+
+ /* The generic reorg_loops () is not suitable for PRU because
+ it doesn't handle doloop_begin/end tying. And we need our
+ doloop_begin emitted before reload. It is difficult to coalesce
+ UBYTE constant initial loop values into the LOOP insn during
+ machine reorg phase. */
+ pru_reorg_loop (insns);
+
+ df_finish_pass (false);
+}
+
+/* Enumerate all PRU-specific builtins. */
+enum pru_builtin
+{
+ PRU_BUILTIN_DELAY_CYCLES,
+ PRU_BUILTIN_max
+};
+
+static GTY(()) tree pru_builtins [(int) PRU_BUILTIN_max];
+
+/* Implement TARGET_INIT_BUILTINS. */
+
+static void
+pru_init_builtins (void)
+{
+ tree void_ftype_longlong
+ = build_function_type_list (void_type_node,
+ long_long_integer_type_node,
+ NULL);
+
+ pru_builtins[PRU_BUILTIN_DELAY_CYCLES]
+ = add_builtin_function ( "__delay_cycles", void_ftype_longlong,
+ PRU_BUILTIN_DELAY_CYCLES, BUILT_IN_MD, NULL,
+ NULL_TREE);
+}
+
+/* Implement TARGET_BUILTIN_DECL. */
+
+static tree
+pru_builtin_decl (unsigned code, bool initialize_p ATTRIBUTE_UNUSED)
+{
+ switch (code)
+ {
+ case PRU_BUILTIN_DELAY_CYCLES:
+ return pru_builtins[code];
+ default:
+ return error_mark_node;
+ }
+}
+
+/* Emit a sequence of one or more delay_cycles_X insns, in order to generate
+ code that delays exactly ARG cycles. */
+
+static rtx
+pru_expand_delay_cycles (rtx arg)
+{
+ HOST_WIDE_INT c, n;
+
+ if (GET_CODE (arg) != CONST_INT)
+ {
+ error ("%<__delay_cycles%> only takes constant arguments");
+ return NULL_RTX;
+ }
+
+ c = INTVAL (arg);
+
+ if (HOST_BITS_PER_WIDE_INT > 32)
+ {
+ if (c < 0)
+ {
+ error ("%<__delay_cycles%> only takes non-negative cycle counts");
+ return NULL_RTX;
+ }
+ }
+
+ emit_insn (gen_delay_cycles_start (arg));
+
+ /* For 32-bit loops, there's 2 + 2x cycles. */
+ if (c > 2 * 0xffff + 1)
+ {
+ n = (c - 2) / 2;
+ c -= (n * 2) + 2;
+ if ((unsigned long long) n > 0xffffffffULL)
+ {
+ error ("%<__delay_cycles%> is limited to 32-bit loop counts");
+ return NULL_RTX;
+ }
+ emit_insn (gen_delay_cycles_2x_plus2_si (GEN_INT (n)));
+ }
+
+ /* For 16-bit loops, there's 1 + 2x cycles. */
+ if (c > 2)
+ {
+ n = (c - 1) / 2;
+ c -= (n * 2) + 1;
+
+ emit_insn (gen_delay_cycles_2x_plus1_hi (GEN_INT (n)));
+ }
+
+ while (c > 0)
+ {
+ emit_insn (gen_delay_cycles_1 ());
+ c -= 1;
+ }
+
+ emit_insn (gen_delay_cycles_end (arg));
+
+ return NULL_RTX;
+}
+
+
+/* Implement TARGET_EXPAND_BUILTIN. Expand an expression EXP that calls
+ a built-in function, with result going to TARGET if that's convenient
+ (and in mode MODE if that's convenient).
+ SUBTARGET may be used as the target for computing one of EXP's operands.
+ IGNORE is nonzero if the value is to be ignored. */
+
+static rtx
+pru_expand_builtin (tree exp, rtx target ATTRIBUTE_UNUSED,
+ rtx subtarget ATTRIBUTE_UNUSED,
+ machine_mode mode ATTRIBUTE_UNUSED,
+ int ignore ATTRIBUTE_UNUSED)
+{
+ tree fndecl = TREE_OPERAND (CALL_EXPR_FN (exp), 0);
+ unsigned int fcode = DECL_FUNCTION_CODE (fndecl);
+ rtx arg1 = expand_normal (CALL_EXPR_ARG (exp, 0));
+
+ if (fcode == PRU_BUILTIN_DELAY_CYCLES)
+ return pru_expand_delay_cycles (arg1);
+
+ internal_error ("bad builtin code");
+
+ return NULL_RTX;
+}
+
+/* Remember the last target of pru_set_current_function. */
+static GTY(()) tree pru_previous_fndecl;
+
+/* Establish appropriate back-end context for processing the function
+ FNDECL. The argument might be NULL to indicate processing at top
+ level, outside of any function scope. */
+static void
+pru_set_current_function (tree fndecl)
+{
+ tree old_tree = (pru_previous_fndecl
+ ? DECL_FUNCTION_SPECIFIC_TARGET (pru_previous_fndecl)
+ : NULL_TREE);
+
+ tree new_tree = (fndecl
+ ? DECL_FUNCTION_SPECIFIC_TARGET (fndecl)
+ : NULL_TREE);
+
+ if (fndecl && fndecl != pru_previous_fndecl)
+ {
+ pru_previous_fndecl = fndecl;
+ if (old_tree == new_tree)
+ ;
+
+ else if (new_tree)
+ {
+ cl_target_option_restore (&global_options,
+ TREE_TARGET_OPTION (new_tree));
+ target_reinit ();
+ }
+
+ else if (old_tree)
+ {
+ struct cl_target_option *def
+ = TREE_TARGET_OPTION (target_option_current_node);
+
+ cl_target_option_restore (&global_options, def);
+ target_reinit ();
+ }
+ }
+}
+
+/* Implement TARGET_UNWIND_WORD_MODE.
+
+ Since PRU is really a 32-bit CPU, the default word_mode is not suitable. */
+static scalar_int_mode
+pru_unwind_word_mode (void)
+{
+ return SImode;
+}
+
+
+/* Initialize the GCC target structure. */
+#undef TARGET_ASM_FUNCTION_PROLOGUE
+#define TARGET_ASM_FUNCTION_PROLOGUE pru_asm_function_prologue
+#undef TARGET_ASM_INTEGER
+#define TARGET_ASM_INTEGER pru_assemble_integer
+
+#undef TARGET_ASM_FILE_START
+#define TARGET_ASM_FILE_START pru_file_start
+
+#undef TARGET_INIT_BUILTINS
+#define TARGET_INIT_BUILTINS pru_init_builtins
+#undef TARGET_EXPAND_BUILTIN
+#define TARGET_EXPAND_BUILTIN pru_expand_builtin
+#undef TARGET_BUILTIN_DECL
+#define TARGET_BUILTIN_DECL pru_builtin_decl
+
+#undef TARGET_FUNCTION_OK_FOR_SIBCALL
+#define TARGET_FUNCTION_OK_FOR_SIBCALL hook_bool_tree_tree_true
+
+#undef TARGET_CAN_ELIMINATE
+#define TARGET_CAN_ELIMINATE pru_can_eliminate
+
+#undef TARGET_MODES_TIEABLE_P
+#define TARGET_MODES_TIEABLE_P pru_modes_tieable_p
+
+#undef TARGET_HARD_REGNO_MODE_OK
+#define TARGET_HARD_REGNO_MODE_OK pru_hard_regno_mode_ok
+
+#undef TARGET_HARD_REGNO_SCRATCH_OK
+#define TARGET_HARD_REGNO_SCRATCH_OK pru_hard_regno_scratch_ok
+
+#undef TARGET_FUNCTION_ARG
+#define TARGET_FUNCTION_ARG pru_function_arg
+
+#undef TARGET_FUNCTION_ARG_ADVANCE
+#define TARGET_FUNCTION_ARG_ADVANCE pru_function_arg_advance
+
+#undef TARGET_ARG_PARTIAL_BYTES
+#define TARGET_ARG_PARTIAL_BYTES pru_arg_partial_bytes
+
+#undef TARGET_FUNCTION_VALUE
+#define TARGET_FUNCTION_VALUE pru_function_value
+
+#undef TARGET_LIBCALL_VALUE
+#define TARGET_LIBCALL_VALUE pru_libcall_value
+
+#undef TARGET_FUNCTION_VALUE_REGNO_P
+#define TARGET_FUNCTION_VALUE_REGNO_P pru_function_value_regno_p
+
+#undef TARGET_RETURN_IN_MEMORY
+#define TARGET_RETURN_IN_MEMORY pru_return_in_memory
+
+#undef TARGET_MUST_PASS_IN_STACK
+#define TARGET_MUST_PASS_IN_STACK must_pass_in_stack_var_size
+
+#undef TARGET_LEGITIMATE_ADDRESS_P
+#define TARGET_LEGITIMATE_ADDRESS_P pru_legitimate_address_p
+
+#undef TARGET_PREFERRED_RELOAD_CLASS
+#define TARGET_PREFERRED_RELOAD_CLASS pru_preferred_reload_class
+
+#undef TARGET_INIT_LIBFUNCS
+#define TARGET_INIT_LIBFUNCS pru_init_libfuncs
+#undef TARGET_LIBFUNC_GNU_PREFIX
+#define TARGET_LIBFUNC_GNU_PREFIX true
+
+#undef TARGET_RTX_COSTS
+#define TARGET_RTX_COSTS pru_rtx_costs
+
+#undef TARGET_PRINT_OPERAND
+#define TARGET_PRINT_OPERAND pru_print_operand
+
+#undef TARGET_PRINT_OPERAND_ADDRESS
+#define TARGET_PRINT_OPERAND_ADDRESS pru_print_operand_address
+
+#undef TARGET_OPTION_OVERRIDE
+#define TARGET_OPTION_OVERRIDE pru_option_override
+
+#undef TARGET_SET_CURRENT_FUNCTION
+#define TARGET_SET_CURRENT_FUNCTION pru_set_current_function
+
+#undef TARGET_MACHINE_DEPENDENT_REORG
+#define TARGET_MACHINE_DEPENDENT_REORG pru_reorg
+
+#undef TARGET_CAN_USE_DOLOOP_P
+#define TARGET_CAN_USE_DOLOOP_P pru_can_use_doloop_p
+
+#undef TARGET_INVALID_WITHIN_DOLOOP
+#define TARGET_INVALID_WITHIN_DOLOOP pru_invalid_within_doloop
+
+#undef TARGET_UNWIND_WORD_MODE
+#define TARGET_UNWIND_WORD_MODE pru_unwind_word_mode
+
+#undef TARGET_HAVE_SPECULATION_SAFE_VALUE
+#define TARGET_HAVE_SPECULATION_SAFE_VALUE speculation_safe_value_not_needed
+
+struct gcc_target targetm = TARGET_INITIALIZER;
+
+#include "gt-pru.h"
diff --git a/gcc/config/pru/pru.h b/gcc/config/pru/pru.h
new file mode 100644
index 00000000000..de1b9100209
--- /dev/null
+++ b/gcc/config/pru/pru.h
@@ -0,0 +1,551 @@
+/* Definitions of target machine for TI PRU.
+ Copyright (C) 2014-2018 Free Software Foundation, Inc.
+ Contributed by Dimitar Dimitrov <dimitar@dinux.eu>
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+#ifndef GCC_PRU_H
+#define GCC_PRU_H
+
+#include "config/pru/pru-opts.h"
+
+/* Define built-in preprocessor macros. */
+#define TARGET_CPU_CPP_BUILTINS() \
+ do \
+ { \
+ builtin_define_std ("__PRU__"); \
+ builtin_define_std ("__pru__"); \
+ builtin_define_std ("__PRU_V3__"); \
+ builtin_define_std ("__LITTLE_ENDIAN__"); \
+ builtin_define_std ("__little_endian__"); \
+ /* Trampolines are disabled for now. */ \
+ builtin_define_std ("NO_TRAMPOLINES"); \
+ } \
+ while (0)
+
+/* TI ABI implementation is not feature enough (e.g. function pointers are
+ not supported), so we cannot list it as a multilib variant. To prevent
+ misuse from users, do not link any of the standard libraries. */
+#define DRIVER_SELF_SPECS \
+ "%{mabi=ti:-nodefaultlibs} " \
+ "%{mmcu=*:-specs=device-specs/%*%s %<mmcu=*} "
+
+#undef CPP_SPEC
+#define CPP_SPEC \
+ "%(cpp_device) " \
+ "%{mabi=ti:-D__PRU_EABI_TI__; :-D__PRU_EABI_GNU__}"
+
+/* Do not relax when in TI ABI mode since TI tools do not always
+ put PRU_S10_PCREL. */
+#undef LINK_SPEC
+#define LINK_SPEC \
+ "%(link_device) " \
+ "%{mabi=ti:--no-relax;:%{mno-relax:--no-relax;:--relax}} " \
+ "%{shared:%eshared is not supported} "
+
+/* CRT0 is carefully maintained to be compatible with both GNU and TI ABIs. */
+#undef STARTFILE_SPEC
+#define STARTFILE_SPEC \
+ "%{!pg:%{minrt:crt0-minrt.o%s}%{!minrt:crt0.o%s}} %{!mabi=ti:-lgcc} "
+
+#undef ENDFILE_SPEC
+#define ENDFILE_SPEC "%{!mabi=ti:-lgloss} "
+
+/* TI ABI mandates that ELF symbols do not start with any prefix. */
+#undef USER_LABEL_PREFIX
+#define USER_LABEL_PREFIX ""
+
+#undef LOCAL_LABEL_PREFIX
+#define LOCAL_LABEL_PREFIX ".L"
+
+/* Storage layout. */
+
+#define DEFAULT_SIGNED_CHAR 0
+#define BITS_BIG_ENDIAN 0
+#define BYTES_BIG_ENDIAN 0
+#define WORDS_BIG_ENDIAN 0
+
+/* PRU is represented in GCC as an 8-bit CPU with fast 16b and 32bb
+ arithmetic. */
+#define BITS_PER_WORD 8
+
+#ifdef IN_LIBGCC2
+/* This is to get correct SI and DI modes in libgcc2.c (32 and 64 bits). */
+#define UNITS_PER_WORD 4
+#else
+/* Width of a word, in units (bytes). */
+#define UNITS_PER_WORD 1
+#endif
+
+#define POINTER_SIZE 32
+#define BIGGEST_ALIGNMENT 8
+#define STRICT_ALIGNMENT 0
+#define FUNCTION_BOUNDARY 8 /* Func pointers are word-addressed. */
+#define PARM_BOUNDARY 8
+#define STACK_BOUNDARY 8
+#define MAX_FIXED_MODE_SIZE 64
+
+#define POINTERS_EXTEND_UNSIGNED 1
+
+/* Layout of source language data types. */
+
+#define INT_TYPE_SIZE 32
+#define SHORT_TYPE_SIZE 16
+#define LONG_TYPE_SIZE 32
+#define LONG_LONG_TYPE_SIZE 64
+#define FLOAT_TYPE_SIZE 32
+#define DOUBLE_TYPE_SIZE 64
+#define LONG_DOUBLE_TYPE_SIZE DOUBLE_TYPE_SIZE
+
+#undef SIZE_TYPE
+#define SIZE_TYPE "unsigned int"
+
+#undef PTRDIFF_TYPE
+#define PTRDIFF_TYPE "int"
+
+
+/* Basic characteristics of PRU registers:
+
+ Regno Name
+ 0 r0 Caller Saved. Also used as a static chain register.
+ 1 r1 Caller Saved. Also used as a temporary by function
+ profiler and function prologue/epilogue.
+ 2 r2 sp Stack Pointer
+ 3* r3.w0 ra Return Address (16-bit)
+ 4 r4 fp Frame Pointer
+ 5-13 r5-r13 Callee Saved Registers
+ 14-29 r14-r29 Register Arguments. Caller Saved Registers.
+ 14-15 r14-r15 Return Location
+ 30 r30 Special I/O register. Not used by compiler.
+ 31 r31 Special I/O register. Not used by compiler.
+
+ 32 loop_cntr Internal register used as a counter by LOOP insns
+
+ 33 pc Not an actual register
+
+ 34 fake_fp Fake Frame Pointer (always eliminated)
+ 35 fake_ap Fake Argument Pointer (always eliminated)
+ 36 First Pseudo Register
+
+ The definitions for all the hard register numbers are located in pru.md.
+*/
+
+#define FIXED_REGISTERS \
+ { \
+/* 0 */ 0,0,0,0, 0,0,0,0, 1,1,1,1, 1,1,1,1, \
+/* 4 */ 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0, \
+/* 8 */ 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0, \
+/* 12 */ 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0, \
+/* 16 */ 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0, \
+/* 20 */ 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0, \
+/* 24 */ 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0, \
+/* 28 */ 0,0,0,0, 0,0,0,0, 1,1,1,1, 1,1,1,1, \
+/* 32 */ 1,1,1,1, 1,1,1,1, 1,1,1,1, 1,1,1,1 \
+ }
+
+/* Call used == caller saved + fixed regs + args + ret vals. */
+#define CALL_USED_REGISTERS \
+ { \
+/* 0 */ 1,1,1,1, 1,1,1,1, 1,1,1,1, 1,1,1,1, \
+/* 4 */ 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0, \
+/* 8 */ 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0, \
+/* 12 */ 0,0,0,0, 0,0,0,0, 1,1,1,1, 1,1,1,1, \
+/* 16 */ 1,1,1,1, 1,1,1,1, 1,1,1,1, 1,1,1,1, \
+/* 20 */ 1,1,1,1, 1,1,1,1, 1,1,1,1, 1,1,1,1, \
+/* 24 */ 1,1,1,1, 1,1,1,1, 1,1,1,1, 1,1,1,1, \
+/* 28 */ 1,1,1,1, 1,1,1,1, 1,1,1,1, 1,1,1,1, \
+/* 32 */ 1,1,1,1, 1,1,1,1, 1,1,1,1, 1,1,1,1 \
+ }
+
+#define __pru_RSEQ(X) (X) * 4 + 0, (X) * 4 + 1, (X) * 4 + 2, (X) * 4 + 3
+#define REG_ALLOC_ORDER \
+ { \
+ /* Call-clobbered, yet not used for parameters. */ \
+ __pru_RSEQ (0), __pru_RSEQ ( 1), \
+ \
+ __pru_RSEQ (14), __pru_RSEQ (15), __pru_RSEQ (16), __pru_RSEQ (17), \
+ __pru_RSEQ (18), __pru_RSEQ (19), __pru_RSEQ (20), __pru_RSEQ (21), \
+ __pru_RSEQ (22), __pru_RSEQ (23), __pru_RSEQ (24), __pru_RSEQ (25), \
+ __pru_RSEQ (26), __pru_RSEQ (27), __pru_RSEQ (28), __pru_RSEQ (29), \
+ \
+ __pru_RSEQ ( 5), __pru_RSEQ ( 6), __pru_RSEQ ( 7), __pru_RSEQ ( 8), \
+ __pru_RSEQ ( 9), __pru_RSEQ (10), __pru_RSEQ (11), __pru_RSEQ (12), \
+ __pru_RSEQ (13), \
+ \
+ __pru_RSEQ ( 4), \
+ __pru_RSEQ ( 2), __pru_RSEQ ( 3), \
+ \
+ /* I/O and virtual registers. */ \
+ __pru_RSEQ (30), __pru_RSEQ (31), __pru_RSEQ (32), __pru_RSEQ (33), \
+ __pru_RSEQ (34), __pru_RSEQ (35) \
+ }
+
+/* Register Classes. */
+
+enum reg_class
+{
+ NO_REGS,
+ SIB_REGS,
+ LOOPCNTR_REGS,
+ GP_REGS,
+ ALL_REGS,
+ LIM_REG_CLASSES
+};
+
+#define N_REG_CLASSES (int) LIM_REG_CLASSES
+
+#define REG_CLASS_NAMES \
+ { "NO_REGS", \
+ "SIB_REGS", \
+ "LOOPCNTR_REGS", \
+ "GP_REGS", \
+ "ALL_REGS" }
+
+#define GENERAL_REGS ALL_REGS
+
+#define REG_CLASS_CONTENTS \
+ { \
+ /* NO_REGS */ { 0, 0, 0, 0, 0}, \
+ /* SIB_REGS */ { 0xf, 0xff000000, ~0, 0xffffff, 0}, \
+ /* LOOPCNTR_REGS */ { 0, 0, 0, 0, 0xf}, \
+ /* GP_REGS */ { ~0, ~0, ~0, ~0, 0}, \
+ /* ALL_REGS */ { ~0,~0, ~0, ~0, ~0} \
+ }
+
+
+#define GP_REG_P(REGNO) ((unsigned)(REGNO) <= LAST_GP_REG)
+#define REGNO_REG_CLASS(REGNO) \
+ ((REGNO) >= FIRST_ARG_REGNO && (REGNO) <= LAST_ARG_REGNO ? SIB_REGS \
+ : (REGNO) == STATIC_CHAIN_REGNUM ? SIB_REGS \
+ : (REGNO) == LOOPCNTR_REG ? LOOPCNTR_REGS \
+ : (REGNO) <= LAST_NONIO_GP_REG ? GP_REGS \
+ : ALL_REGS)
+
+#define CLASS_MAX_NREGS(CLASS, MODE) \
+ ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
+
+/* Arbitrarily set to a non-argument register. Not defined by TI ABI. */
+#define STATIC_CHAIN_REGNUM 0 /* r0 */
+
+/* Tests for various kinds of constants used in the PRU port. */
+#define SHIFT_INT(X) ((X) >= 0 && (X) <= 31)
+
+#define UHWORD_INT(X) (IN_RANGE ((X), 0, 0xffff))
+#define SHWORD_INT(X) (IN_RANGE ((X), -32768, 32767))
+#define UBYTE_INT(X) (IN_RANGE ((X), 0, 0xff))
+
+/* Say that the epilogue uses the return address register. Note that
+ in the case of sibcalls, the values "used by the epilogue" are
+ considered live at the start of the called function. */
+#define EPILOGUE_USES(REGNO) (epilogue_completed && \
+ (((REGNO) == RA_REGNO) \
+ || (REGNO) == (RA_REGNO + 1)))
+
+/* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
+ the stack pointer does not matter. The value is tested only in
+ functions that have frame pointers.
+ No definition is equivalent to always zero. */
+
+#define EXIT_IGNORE_STACK 1
+
+/* Trampolines are not supported, but put a define to keep the build. */
+#define TRAMPOLINE_SIZE 4
+
+/* Stack layout. */
+#define STACK_GROWS_DOWNWARD 1
+#undef FRAME_GROWS_DOWNWARD
+#define FIRST_PARM_OFFSET(FUNDECL) 0
+
+/* Before the prologue, RA lives in r3.w2. */
+#define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (HImode, RA_REGNO)
+
+#define RETURN_ADDR_RTX(C,F) pru_get_return_address (C)
+
+#define DWARF_FRAME_RETURN_COLUMN RA_REGNO
+
+/* The CFA includes the pretend args. */
+#define ARG_POINTER_CFA_OFFSET(FNDECL) \
+ (gcc_assert ((FNDECL) == current_function_decl), \
+ FIRST_PARM_OFFSET (FNDECL) + crtl->args.pretend_args_size)
+
+/* Frame/arg pointer elimination settings. */
+#define ELIMINABLE_REGS \
+{{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
+ { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}, \
+ { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
+ { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}}
+
+#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
+ (OFFSET) = pru_initial_elimination_offset ((FROM), (TO))
+
+#define HARD_REGNO_RENAME_OK(OLD_REG, NEW_REG) \
+ pru_hard_regno_rename_ok (OLD_REG, NEW_REG)
+
+/* Calling convention definitions. */
+#if !defined(IN_LIBGCC2)
+
+#define NUM_ARG_REGS (LAST_ARG_REGNO - FIRST_ARG_REGNO + 1)
+
+typedef struct pru_args
+{
+ bool regs_used[NUM_ARG_REGS];
+} CUMULATIVE_ARGS;
+
+#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, FNDECL, N_NAMED_ARGS) \
+ do { \
+ memset ((CUM).regs_used, 0, sizeof ((CUM).regs_used)); \
+ } while (0)
+
+#define FUNCTION_ARG_REGNO_P(REGNO) \
+ ((REGNO) >= FIRST_ARG_REGNO && (REGNO) <= LAST_ARG_REGNO)
+
+/* Passing function arguments on stack. */
+#define PUSH_ARGS 0
+#define ACCUMULATE_OUTGOING_ARGS 1
+
+/* We define TARGET_RETURN_IN_MEMORY, so set to zero. */
+#define DEFAULT_PCC_STRUCT_RETURN 0
+
+/* Profiling. */
+#define PROFILE_BEFORE_PROLOGUE
+#define NO_PROFILE_COUNTERS 1
+#define FUNCTION_PROFILER(FILE, LABELNO) \
+ pru_function_profiler ((FILE), (LABELNO))
+
+#endif /* IN_LIBGCC2 */
+
+/* Addressing modes. */
+
+#define CONSTANT_ADDRESS_P(X) \
+ (CONSTANT_P (X) && memory_address_p (SImode, X))
+
+#define MAX_REGS_PER_ADDRESS 2
+#define BASE_REG_CLASS ALL_REGS
+#define INDEX_REG_CLASS ALL_REGS
+
+#define REGNO_OK_FOR_BASE_P(REGNO) pru_regno_ok_for_base_p ((REGNO), true)
+#define REGNO_OK_FOR_INDEX_P(REGNO) pru_regno_ok_for_index_p ((REGNO), true)
+
+/* Limited by the insns in pru-ldst-multiple.md. */
+#define MOVE_MAX 8
+#define SLOW_BYTE_ACCESS 1
+
+/* It is as good to call a constant function address as to call an address
+ kept in a register. */
+#define NO_FUNCTION_CSE 1
+
+/* Define output assembler language. */
+
+#define ASM_APP_ON "#APP\n"
+#define ASM_APP_OFF "#NO_APP\n"
+
+#define ASM_COMMENT_START "# "
+
+#define GLOBAL_ASM_OP "\t.global\t"
+
+#define __pru_name_R(X) X".b0", X".b1", X".b2", X".b3"
+#define REGISTER_NAMES \
+ { \
+ __pru_name_R ("r0"), \
+ __pru_name_R ("r1"), \
+ __pru_name_R ("r2"), \
+ __pru_name_R ("r3"), \
+ __pru_name_R ("r4"), \
+ __pru_name_R ("r5"), \
+ __pru_name_R ("r6"), \
+ __pru_name_R ("r7"), \
+ __pru_name_R ("r8"), \
+ __pru_name_R ("r9"), \
+ __pru_name_R ("r10"), \
+ __pru_name_R ("r11"), \
+ __pru_name_R ("r12"), \
+ __pru_name_R ("r13"), \
+ __pru_name_R ("r14"), \
+ __pru_name_R ("r15"), \
+ __pru_name_R ("r16"), \
+ __pru_name_R ("r17"), \
+ __pru_name_R ("r18"), \
+ __pru_name_R ("r19"), \
+ __pru_name_R ("r20"), \
+ __pru_name_R ("r21"), \
+ __pru_name_R ("r22"), \
+ __pru_name_R ("r23"), \
+ __pru_name_R ("r24"), \
+ __pru_name_R ("r25"), \
+ __pru_name_R ("r26"), \
+ __pru_name_R ("r27"), \
+ __pru_name_R ("r28"), \
+ __pru_name_R ("r29"), \
+ __pru_name_R ("r30"), \
+ __pru_name_R ("r31"), \
+ __pru_name_R ("loopcntr_reg"), \
+ __pru_name_R ("pc"), \
+ __pru_name_R ("fake_fp"), \
+ __pru_name_R ("fake_ap"), \
+}
+
+#define __pru_overlap_R(X) \
+ { "r" #X , X * 4 , 4 }, \
+ { "r" #X ".w0", X * 4 + 0 , 2 }, \
+ { "r" #X ".w1", X * 4 + 1 , 2 }, \
+ { "r" #X ".w2", X * 4 + 2 , 2 }
+
+#define OVERLAPPING_REGISTER_NAMES \
+ { \
+ /* Aliases. */ \
+ { "sp", 2 * 4, 4 }, \
+ { "ra", 3 * 4, 2 }, \
+ { "fp", 4 * 4, 4 }, \
+ __pru_overlap_R (0), \
+ __pru_overlap_R (1), \
+ __pru_overlap_R (2), \
+ __pru_overlap_R (3), \
+ __pru_overlap_R (4), \
+ __pru_overlap_R (5), \
+ __pru_overlap_R (6), \
+ __pru_overlap_R (7), \
+ __pru_overlap_R (8), \
+ __pru_overlap_R (9), \
+ __pru_overlap_R (10), \
+ __pru_overlap_R (11), \
+ __pru_overlap_R (12), \
+ __pru_overlap_R (13), \
+ __pru_overlap_R (14), \
+ __pru_overlap_R (15), \
+ __pru_overlap_R (16), \
+ __pru_overlap_R (17), \
+ __pru_overlap_R (18), \
+ __pru_overlap_R (19), \
+ __pru_overlap_R (20), \
+ __pru_overlap_R (21), \
+ __pru_overlap_R (22), \
+ __pru_overlap_R (23), \
+ __pru_overlap_R (24), \
+ __pru_overlap_R (25), \
+ __pru_overlap_R (26), \
+ __pru_overlap_R (27), \
+ __pru_overlap_R (28), \
+ __pru_overlap_R (29), \
+ __pru_overlap_R (30), \
+ __pru_overlap_R (31), \
+}
+
+#define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
+ do \
+ { \
+ fputs (integer_asm_op (POINTER_SIZE / BITS_PER_UNIT, TRUE), FILE); \
+ fprintf (FILE, "%%pmem(.L%u)\n", (unsigned) (VALUE)); \
+ } \
+ while (0)
+
+#define ASM_OUTPUT_ADDR_DIFF_ELT(STREAM, BODY, VALUE, REL) \
+ do \
+ { \
+ fputs (integer_asm_op (POINTER_SIZE / BITS_PER_UNIT, TRUE), STREAM); \
+ fprintf (STREAM, "%%pmem(.L%u-.L%u)\n", (unsigned) (VALUE), \
+ (unsigned) (REL)); \
+ } \
+ while (0)
+
+/* Section directives. */
+
+/* Output before read-only data. */
+#define TEXT_SECTION_ASM_OP "\t.section\t.text"
+
+/* Output before writable data. */
+#define DATA_SECTION_ASM_OP "\t.section\t.data"
+
+/* Output before uninitialized data. */
+#define BSS_SECTION_ASM_OP "\t.section\t.bss"
+
+#define CTORS_SECTION_ASM_OP "\t.section\t.init_array,\"aw\",%init_array"
+#define DTORS_SECTION_ASM_OP "\t.section\t.fini_array,\"aw\",%fini_array"
+
+#undef INIT_SECTION_ASM_OP
+#undef FINI_SECTION_ASM_OP
+#define INIT_ARRAY_SECTION_ASM_OP CTORS_SECTION_ASM_OP
+#define FINI_ARRAY_SECTION_ASM_OP DTORS_SECTION_ASM_OP
+
+/* Since we use .init_array/.fini_array we don't need the markers at
+ the start and end of the ctors/dtors arrays. */
+#define CTOR_LIST_BEGIN asm (CTORS_SECTION_ASM_OP)
+#define CTOR_LIST_END /* empty */
+#define DTOR_LIST_BEGIN asm (DTORS_SECTION_ASM_OP)
+#define DTOR_LIST_END /* empty */
+
+#undef TARGET_ASM_CONSTRUCTOR
+#define TARGET_ASM_CONSTRUCTOR pru_elf_asm_constructor
+
+#undef TARGET_ASM_DESTRUCTOR
+#define TARGET_ASM_DESTRUCTOR pru_elf_asm_destructor
+
+#define ASM_OUTPUT_ALIGN(FILE, LOG) \
+ do { \
+ fprintf ((FILE), "%s%d\n", ALIGN_ASM_OP, (LOG)); \
+ } while (0)
+
+#undef ASM_OUTPUT_ALIGNED_COMMON
+#define ASM_OUTPUT_ALIGNED_COMMON(FILE, NAME, SIZE, ALIGN) \
+do \
+ { \
+ fprintf ((FILE), "%s", COMMON_ASM_OP); \
+ assemble_name ((FILE), (NAME)); \
+ fprintf ((FILE), "," HOST_WIDE_INT_PRINT_UNSIGNED ",%u\n", (SIZE), \
+ (ALIGN) / BITS_PER_UNIT); \
+ } \
+while (0)
+
+
+/* This says how to output assembler code to declare an
+ uninitialized internal linkage data object. Under SVR4,
+ the linker seems to want the alignment of data objects
+ to depend on their types. We do exactly that here. */
+
+#undef ASM_OUTPUT_ALIGNED_LOCAL
+#define ASM_OUTPUT_ALIGNED_LOCAL(FILE, NAME, SIZE, ALIGN) \
+do { \
+ switch_to_section (bss_section); \
+ ASM_OUTPUT_TYPE_DIRECTIVE (FILE, NAME, "object"); \
+ if (!flag_inhibit_size_directive) \
+ ASM_OUTPUT_SIZE_DIRECTIVE (FILE, NAME, SIZE); \
+ ASM_OUTPUT_ALIGN ((FILE), exact_log2 ((ALIGN) / BITS_PER_UNIT)); \
+ ASM_OUTPUT_LABEL (FILE, NAME); \
+ ASM_OUTPUT_SKIP ((FILE), (SIZE) ? (SIZE) : 1); \
+} while (0)
+
+/* Misc parameters. */
+
+#define STORE_FLAG_VALUE 1
+#define Pmode SImode
+#define FUNCTION_MODE Pmode
+
+#define CASE_VECTOR_MODE Pmode
+
+/* Jumps are cheap on PRU. */
+#define LOGICAL_OP_NON_SHORT_CIRCUIT 0
+
+/* Unfortunately the LBBO instruction does not zero-extend data. */
+#undef LOAD_EXTEND_OP
+
+#undef WORD_REGISTER_OPERATIONS
+
+#define HAS_LONG_UNCOND_BRANCH 1
+#define HAS_LONG_COND_BRANCH 1
+
+#define REGISTER_TARGET_PRAGMAS() pru_register_pragmas ()
+
+#endif /* GCC_PRU_H */
diff --git a/gcc/config/pru/pru.md b/gcc/config/pru/pru.md
new file mode 100644
index 00000000000..de6639e1648
--- /dev/null
+++ b/gcc/config/pru/pru.md
@@ -0,0 +1,946 @@
+;; Machine Description for TI PRU.
+;; Copyright (C) 2014-2018 Free Software Foundation, Inc.
+;; Contributed by Dimitar Dimitrov <dimitar@dinux.eu>
+;; Based on the NIOS2 GCC port.
+;;
+;; This file is part of GCC.
+;;
+;; GCC is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 3, or (at your option)
+;; any later version.
+;;
+;; GCC is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+;; GNU General Public License for more details.
+;;
+;; You should have received a copy of the GNU General Public License
+;; along with GCC; see the file COPYING3. If not see
+;; <http://www.gnu.org/licenses/>.
+
+;; Register numbers.
+(define_constants
+ [
+ (FIRST_ARG_REGNO 56) ; Argument registers.
+ (LAST_ARG_REGNO 119) ;
+ (FIRST_RETVAL_REGNO 56) ; Return value registers.
+ (LAST_RETVAL_REGNO 60) ;
+ (PROLOGUE_TEMP_REGNO 4) ; Temporary register to use in prologue.
+
+ (RA_REGNO 14) ; Return address register r3.w2.
+ (FP_REGNO 16) ; Frame pointer register.
+ (LAST_NONIO_GP_REG 119) ; Last non-I/O general purpose register.
+ (LOOPCNTR_REG 128) ; internal LOOP counter register
+ (LAST_GP_REG 132) ; Last general purpose register.
+
+ ;; Target register definitions.
+ (STACK_POINTER_REGNUM 8)
+ (HARD_FRAME_POINTER_REGNUM FP_REGNO)
+ (PC_REGNUM 132)
+ (FRAME_POINTER_REGNUM 136)
+ (ARG_POINTER_REGNUM 140)
+ (FIRST_PSEUDO_REGISTER 144)
+ ]
+)
+
+;; Enumeration of UNSPECs.
+
+(define_c_enum "unspecv" [
+ UNSPECV_DELAY_CYCLES_START
+ UNSPECV_DELAY_CYCLES_END
+ UNSPECV_DELAY_CYCLES_2X_HI
+ UNSPECV_DELAY_CYCLES_2X_SI
+ UNSPECV_DELAY_CYCLES_1
+
+ UNSPECV_LOOP_BEGIN
+ UNSPECV_LOOP_END
+
+ UNSPECV_BLOCKAGE
+])
+
+; Length of an instruction (in bytes).
+(define_attr "length" "" (const_int 4))
+(define_attr "type"
+ "unknown,complex,control,alu,cond_alu,st,ld,shift"
+ (const_string "complex"))
+
+(define_asm_attributes
+ [(set_attr "length" "4")
+ (set_attr "type" "complex")])
+
+; There is no pipeline, so our scheduling description is simple.
+(define_automaton "pru")
+(define_cpu_unit "cpu" "pru")
+
+(define_insn_reservation "everything" 1 (match_test "true") "cpu")
+
+(include "predicates.md")
+(include "constraints.md")
+
+;; All supported direct move-modes
+(define_mode_iterator MOV8_16_32 [QI QQ UQQ
+ HI HQ UHQ HA UHA
+ SI SQ USQ SA USA SF SD])
+
+(define_mode_iterator MOV8_16 [QI QQ UQQ
+ HI HQ UHQ HA UHA])
+(define_mode_iterator MOV32 [SI SQ USQ SA USA SF SD])
+(define_mode_iterator MOV64 [DI DF DD DQ UDQ])
+(define_mode_iterator QISI [QI HI SI])
+(define_mode_iterator HISI [HI SI])
+(define_mode_iterator SFDF [SF DF])
+
+;; EQS0/0 for extension source 0/1 and EQD for extension destination patterns.
+(define_mode_iterator EQS0 [QI HI SI])
+(define_mode_iterator EQS1 [QI HI SI])
+(define_mode_iterator EQD [QI HI SI])
+
+; Not recommended. Please use %0 instead!
+(define_mode_attr regwidth [(QI ".b0") (HI ".w0") (SI "")])
+
+;; Move instructions
+
+(define_expand "mov<mode>"
+ [(set (match_operand:MOV8_16_32 0 "nonimmediate_operand" "")
+ (match_operand:MOV8_16_32 1 "general_operand" ""))]
+ ""
+{
+ /* It helps to split constant loading and memory access
+ early, so that the LDI/LDI32 instructions can be hoisted
+ outside a loop body. */
+ if (MEM_P (operands[0]))
+ operands[1] = force_reg (<MODE>mode, operands[1]);
+})
+
+;; Keep a single pattern for 32 bit MOV operations. LRA requires that the
+;; movXX patterns be unified for any given mode.
+;;
+;; Note: Assume that Program Mem (T constraint) can fit in 16 bits!
+(define_insn "prumov<mode>"
+ [(set (match_operand:MOV32 0 "nonimmediate_operand" "=m,r,r,r,r,r")
+ (match_operand:MOV32 1 "general_operand" "r,m,r,T,J,iF"))]
+ ""
+ "@
+ sb%B0o\\t%b1, %0, %S0
+ lb%B1o\\t%b0, %1, %S1
+ mov\\t%0, %1
+ ldi\\t%0, %%pmem(%1)
+ ldi\\t%0, %1
+ ldi32\\t%0, %1"
+ [(set_attr "type" "st,ld,alu,alu,alu,alu")
+ (set_attr "length" "4,4,4,4,4,8")])
+
+
+;; Separate pattern for 8 and 16 bit moves, since LDI32 pseudo instruction
+;; cannot handle byte and word-sized registers.
+(define_insn "prumov<mode>"
+ [(set (match_operand:MOV8_16 0 "nonimmediate_operand" "=m,r,r,r,r,r")
+ (match_operand:MOV8_16 1 "general_operand" "r,m,r,T,J,N"))]
+ ""
+ "@
+ sb%B0o\\t%b1, %0, %S0
+ lb%B1o\\t%b0, %1, %S1
+ mov\\t%0, %1
+ ldi\\t%0, %%pmem(%1)
+ ldi\\t%0, %1
+ ldi\\t%0, (%1) & 0xffff"
+ [(set_attr "type" "st,ld,alu,alu,alu,alu")
+ (set_attr "length" "4,4,4,4,4,4")])
+
+
+; I cannot think of any reason for the core to pass a 64-bit symbolic
+; constants. Hence simplify the rule and handle only numeric constants.
+;
+; Note: Unlike the arithmetics, here we cannot use "&" output modifier.
+; GCC expects to be able to move registers around "no matter what".
+; Forcing DI reg alignment (akin to microblaze's HARD_REGNO_MODE_OK)
+; does not seem efficient, and will violate TI ABI.
+(define_insn "mov<mode>"
+ [(set (match_operand:MOV64 0 "nonimmediate_operand" "=m,r,r,r,r,r")
+ (match_operand:MOV64 1 "general_operand" "r,m,r,T,J,nF"))]
+ ""
+{
+ switch (which_alternative)
+ {
+ case 0:
+ return "sb%B0o\\t%b1, %0, %S0";
+ case 1:
+ return "lb%B1o\\t%b0, %1, %S1";
+ case 2:
+ /* careful with overlapping source and destination regs. */
+ gcc_assert (GP_REG_P (REGNO (operands[0])));
+ gcc_assert (GP_REG_P (REGNO (operands[1])));
+ if (REGNO (operands[0]) == (REGNO (operands[1]) + 4))
+ return "mov\\t%N0, %N1\;mov\\t%F0, %F1";
+ else
+ return "mov\\t%F0, %F1\;mov\\t%N0, %N1";
+ case 3:
+ return "ldi\\t%F0, %%pmem(%1)\;ldi\\t%N0, 0";
+ case 4:
+ return "ldi\\t%F0, %1\;ldi\\t%N0, 0";
+ case 5:
+ return "ldi32\\t%F0, %w1\;ldi32\\t%N0, %W1";
+ default:
+ gcc_unreachable ();
+ }
+}
+ [(set_attr "type" "st,ld,alu,alu,alu,alu")
+ (set_attr "length" "4,4,8,8,8,16")])
+
+;
+; load_multiple pattern(s).
+;
+; ??? Due to reload problems with replacing registers inside match_parallel
+; we currently support load_multiple/store_multiple only after reload.
+;
+; Idea taken from the s390 port.
+
+(define_expand "load_multiple"
+ [(match_par_dup 3 [(set (match_operand 0 "" "")
+ (match_operand 1 "" ""))
+ (use (match_operand 2 "" ""))])]
+ "reload_completed"
+{
+ machine_mode mode;
+ int regno;
+ int count;
+ rtx from;
+ int i, off;
+
+ /* Support only loading a constant number of fixed-point registers from
+ memory. */
+ if (GET_CODE (operands[2]) != CONST_INT
+ || GET_CODE (operands[1]) != MEM
+ || GET_CODE (operands[0]) != REG)
+ FAIL;
+
+ count = INTVAL (operands[2]);
+ regno = REGNO (operands[0]);
+ mode = GET_MODE (operands[0]);
+ if (mode != QImode)
+ FAIL;
+
+ operands[3] = gen_rtx_PARALLEL (VOIDmode, rtvec_alloc (count));
+ if (!can_create_pseudo_p ())
+ {
+ if (GET_CODE (XEXP (operands[1], 0)) == REG)
+ {
+ from = XEXP (operands[1], 0);
+ off = 0;
+ }
+ else if (GET_CODE (XEXP (operands[1], 0)) == PLUS
+ && GET_CODE (XEXP (XEXP (operands[1], 0), 0)) == REG
+ && GET_CODE (XEXP (XEXP (operands[1], 0), 1)) == CONST_INT)
+ {
+ from = XEXP (XEXP (operands[1], 0), 0);
+ off = INTVAL (XEXP (XEXP (operands[1], 0), 1));
+ }
+ else
+ FAIL;
+ }
+ else
+ {
+ from = force_reg (Pmode, XEXP (operands[1], 0));
+ off = 0;
+ }
+
+ for (i = 0; i < count; i++)
+ XVECEXP (operands[3], 0, i)
+ = gen_rtx_SET (gen_rtx_REG (mode, regno + i),
+ change_address (operands[1], mode,
+ plus_constant (Pmode, from,
+ off + i * GET_MODE_SIZE (mode))));
+})
+
+(define_insn "*pru_load_multiple"
+ [(match_parallel 0 "load_multiple_operation"
+ [(set (match_operand:QI 1 "register_operand" "=r")
+ (match_operand:QI 2 "memory_operand" "m"))])]
+ "reload_completed"
+{
+ int nregs = XVECLEN (operands[0], 0);
+ operands[0] = GEN_INT (nregs);
+ return "lb%B2o\\t%b1, %2, %0";
+}
+ [(set_attr "type" "ld")
+ (set_attr "length" "4")])
+
+;
+; store multiple pattern(s).
+;
+
+(define_expand "store_multiple"
+ [(match_par_dup 3 [(set (match_operand 0 "" "")
+ (match_operand 1 "" ""))
+ (use (match_operand 2 "" ""))])]
+ "reload_completed"
+{
+ machine_mode mode;
+ int regno;
+ int count;
+ rtx to;
+ int i, off;
+
+ /* Support only storing a constant number of fixed-point registers to
+ memory. */
+ if (GET_CODE (operands[2]) != CONST_INT
+ || GET_CODE (operands[0]) != MEM
+ || GET_CODE (operands[1]) != REG)
+ FAIL;
+
+ count = INTVAL (operands[2]);
+ regno = REGNO (operands[1]);
+ mode = GET_MODE (operands[1]);
+ if (mode != QImode)
+ FAIL;
+
+ operands[3] = gen_rtx_PARALLEL (VOIDmode, rtvec_alloc (count));
+
+ if (!can_create_pseudo_p ())
+ {
+ if (GET_CODE (XEXP (operands[0], 0)) == REG)
+ {
+ to = XEXP (operands[0], 0);
+ off = 0;
+ }
+ else if (GET_CODE (XEXP (operands[0], 0)) == PLUS
+ && GET_CODE (XEXP (XEXP (operands[0], 0), 0)) == REG
+ && GET_CODE (XEXP (XEXP (operands[0], 0), 1)) == CONST_INT)
+ {
+ to = XEXP (XEXP (operands[0], 0), 0);
+ off = INTVAL (XEXP (XEXP (operands[0], 0), 1));
+ }
+ else
+ FAIL;
+ }
+ else
+ {
+ to = force_reg (Pmode, XEXP (operands[0], 0));
+ off = 0;
+ }
+
+ for (i = 0; i < count; i++)
+ XVECEXP (operands[3], 0, i)
+ = gen_rtx_SET (change_address (operands[0], mode,
+ plus_constant (Pmode, to,
+ off + i * GET_MODE_SIZE (mode))),
+ gen_rtx_REG (mode, regno + i));
+})
+
+(define_insn "*pru_store_multiple"
+ [(match_parallel 0 "store_multiple_operation"
+ [(set (match_operand:QI 1 "memory_operand" "=m")
+ (match_operand:QI 2 "register_operand" "r"))])]
+ "reload_completed"
+{
+ int nregs = XVECLEN (operands[0], 0);
+ operands[0] = GEN_INT (nregs);
+ return "sb%B1o\\t%b2, %1, %0";
+}
+ [(set_attr "type" "st")
+ (set_attr "length" "4")])
+
+;; Zero extension patterns
+;;
+;; Unfortunately we cannot use lbbo to load AND zero-extent a value.
+;; The burst length parameter of the LBBO instruction designates not only
+;; the number of memory data bytes fetched, but also the number of register
+;; byte fields written.
+(define_expand "zero_extend<EQS0:mode><EQD:mode>2"
+ [(set (match_operand:EQD 0 "register_operand" "=r")
+ (zero_extend:EQD (match_operand:EQS0 1 "register_operand" "r")))]
+ ""
+ ""
+ [(set_attr "type" "alu")])
+
+(define_insn "*zero_extend<EQS0:mode><EQD:mode>2"
+ [(set (match_operand:EQD 0 "register_operand" "=r")
+ (zero_extend:EQD (match_operand:EQS0 1 "register_operand" "r")))]
+ ""
+ "mov\\t%0, %1"
+ [(set_attr "type" "alu")])
+
+;; Sign extension patterns. We have to emulate them due to lack of
+;; signed operations in PRU's ALU.
+
+(define_insn "extend<EQS0:mode><EQD:mode>2"
+ [(set (match_operand:EQD 0 "register_operand" "=r")
+ (sign_extend:EQD (match_operand:EQS0 1 "register_operand" "r")))]
+ ""
+{
+ return pru_output_sign_extend (operands);
+}
+ [(set_attr "type" "complex")
+ (set_attr "length" "12")])
+
+;; Bit extraction
+;; We define it solely to allow combine to choose SImode
+;; for word mode when trying to match our cbranch_qbbx_* insn.
+;;
+;; Check how combine.c:make_extraction() uses
+;; get_best_reg_extraction_insn() to select the op size.
+(define_insn "extzv<mode>"
+ [(set (match_operand:QISI 0 "register_operand" "=r")
+ (zero_extract:QISI
+ (match_operand:QISI 1 "register_operand" "r")
+ (match_operand:QISI 2 "const_int_operand" "i")
+ (match_operand:QISI 3 "const_int_operand" "i")))]
+ ""
+ "lsl\\t%0, %1, (%S0 * 8 - %2 - %3)\;lsr\\t%0, %0, (%S0 * 8 - %2)"
+ [(set_attr "type" "complex")
+ (set_attr "length" "8")])
+
+
+
+;; Arithmetic Operations
+
+(define_expand "add<mode>3"
+ [(set (match_operand:QISI 0 "register_operand" "=r,r,r")
+ (plus:QISI (match_operand:QISI 1 "register_operand" "%r,r,r")
+ (match_operand:QISI 2 "nonmemory_operand" "r,I,M")))]
+ ""
+ ""
+ [(set_attr "type" "alu")])
+
+(define_insn "adddi3"
+ [(set (match_operand:DI 0 "register_operand" "=&r,&r,&r")
+ (plus:DI (match_operand:DI 1 "register_operand" "%r,r,r")
+ (match_operand:DI 2 "reg_or_ubyte_operand" "r,I,M")))]
+ ""
+ "@
+ add\\t%F0, %F1, %F2\;adc\\t%N0, %N1, %N2
+ add\\t%F0, %F1, %2\;adc\\t%N0, %N1, 0
+ sub\\t%F0, %F1, %n2\;suc\\t%N0, %N1, 0"
+ [(set_attr "type" "alu,alu,alu")
+ (set_attr "length" "8,8,8")])
+
+(define_expand "sub<mode>3"
+ [(set (match_operand:QISI 0 "register_operand" "=r,r,r")
+ (minus:QISI (match_operand:QISI 1 "reg_or_ubyte_operand" "r,r,I")
+ (match_operand:QISI 2 "reg_or_ubyte_operand" "r,I,r")))]
+ ""
+ ""
+ [(set_attr "type" "alu")])
+
+(define_insn "subdi3"
+ [(set (match_operand:DI 0 "register_operand" "=&r,&r,&r")
+ (minus:DI (match_operand:DI 1 "register_operand" "r,r,I")
+ (match_operand:DI 2 "reg_or_ubyte_operand" "r,I,r")))]
+ ""
+ "@
+ sub\\t%F0, %F1, %F2\;suc\\t%N0, %N1, %N2
+ sub\\t%F0, %F1, %2\;suc\\t%N0, %N1, 0
+ rsb\\t%F0, %F2, %1\;rsc\\t%N0, %N2, 0"
+ [(set_attr "type" "alu,alu,alu")
+ (set_attr "length" "8,8,8")])
+
+;; Negate and ones complement
+
+(define_expand "neg<mode>2"
+ [(set (match_operand:QISI 0 "register_operand" "=r")
+ (neg:QISI (match_operand:QISI 1 "register_operand" "r")))]
+ ""
+ ""
+ [(set_attr "type" "alu")])
+
+(define_expand "one_cmpl<mode>2"
+ [(set (match_operand:QISI 0 "register_operand" "=r")
+ (not:QISI (match_operand:QISI 1 "register_operand" "r")))]
+ ""
+ ""
+ [(set_attr "type" "alu")])
+
+;; Integer logical Operations
+;;
+;; TODO - add optimized cases that exploit the fact that we can get away
+;; with a single machine op for special constants, e.g. UBYTE << (0/8/16/24)
+
+(define_code_iterator LOGICAL [and ior xor umin umax])
+(define_code_attr logical_asm [(and "and") (ior "or") (xor "xor") (umin "min") (umax "max")])
+
+(define_code_iterator LOGICAL_BITOP [and ior xor])
+(define_code_attr logical_bitop_asm [(and "and") (ior "or") (xor "xor")])
+
+(define_expand "<code><mode>3"
+ [(set (match_operand:QISI 0 "register_operand" "=r")
+ (LOGICAL:QISI (match_operand:QISI 1 "register_operand" "%r")
+ (match_operand:QISI 2 "reg_or_ubyte_operand" "rI")))]
+ ""
+ ""
+ [(set_attr "type" "alu")])
+
+
+;; Shift instructions
+
+(define_code_iterator SHIFT [ashift lshiftrt])
+(define_code_attr shift_op [(ashift "ashl") (lshiftrt "lshr")])
+(define_code_attr shift_asm [(ashift "lsl") (lshiftrt "lsr")])
+
+(define_expand "<shift_op><mode>3"
+ [(set (match_operand:QISI 0 "register_operand" "=r")
+ (SHIFT:QISI (match_operand:QISI 1 "register_operand" "r")
+ (match_operand:QISI 2 "shift_operand" "rL")))]
+ ""
+ ""
+ [(set_attr "type" "shift")])
+
+; LRA cannot cope with clobbered op2, hence the scratch register.
+(define_insn "ashr<mode>3"
+ [(set (match_operand:QISI 0 "register_operand" "=&r,r")
+ (ashiftrt:QISI
+ (match_operand:QISI 1 "register_operand" "0,r")
+ (match_operand:QISI 2 "reg_or_const_1_operand" "r,P")))
+ (clobber (match_scratch:QISI 3 "=r,X"))]
+ ""
+ "@
+ mov %3, %2\;ASHRLP%=:\;qbeq ASHREND%=, %3, 0\; sub %3, %3, 1\; lsr\\t%0, %0, 1\; qbbc ASHRLP%=, %0, (%S0 * 8) - 2\; set %0, %0, (%S0 * 8) - 1\; jmp ASHRLP%=\;ASHREND%=:
+ lsr\\t%0, %1, 1\;qbbc LSIGN%=, %0, (%S0 * 8) - 2\;set %0, %0, (%S0 * 8) - 1\;LSIGN%=:"
+ [(set_attr "type" "complex,alu")
+ (set_attr "length" "28,4")])
+
+
+;; Include ALU patterns with zero-extension of operands. That's where
+;; the real insns are defined.
+
+(include "alu-zext.md")
+
+(define_insn "<code>di3"
+ [(set (match_operand:DI 0 "register_operand" "=&r,&r")
+ (LOGICAL_BITOP:DI
+ (match_operand:DI 1 "register_operand" "%r,r")
+ (match_operand:DI 2 "reg_or_ubyte_operand" "r,I")))]
+ ""
+ "@
+ <logical_bitop_asm>\\t%F0, %F1, %F2\;<logical_bitop_asm>\\t%N0, %N1, %N2
+ <logical_bitop_asm>\\t%F0, %F1, %2\;<logical_bitop_asm>\\t%N0, %N1, 0"
+ [(set_attr "type" "alu,alu")
+ (set_attr "length" "8,8")])
+
+
+(define_insn "one_cmpldi2"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (not:DI (match_operand:DI 1 "register_operand" "r")))]
+ ""
+{
+ /* careful with overlapping source and destination regs. */
+ gcc_assert (GP_REG_P (REGNO (operands[0])));
+ gcc_assert (GP_REG_P (REGNO (operands[1])));
+ if (REGNO (operands[0]) == (REGNO (operands[1]) + 4))
+ return "not\\t%N0, %N1\;not\\t%F0, %F1";
+ else
+ return "not\\t%F0, %F1\;not\\t%N0, %N1";
+}
+ [(set_attr "type" "alu")
+ (set_attr "length" "8")])
+
+;; Multiply instruction. Idea for fixing registers comes from the AVR backend.
+
+(define_expand "mulsi3"
+ [(set (match_operand:SI 0 "register_operand" "")
+ (mult:SI (match_operand:SI 1 "register_operand" "")
+ (match_operand:SI 2 "register_operand" "")))]
+ ""
+{
+ emit_insn (gen_mulsi3_fixinp (operands[0], operands[1], operands[2]));
+ DONE;
+})
+
+
+(define_expand "mulsi3_fixinp"
+ [(set (reg:SI 112) (match_operand:SI 1 "register_operand" ""))
+ (set (reg:SI 116) (match_operand:SI 2 "register_operand" ""))
+ (set (reg:SI 104) (mult:SI (reg:SI 112) (reg:SI 116)))
+ (set (match_operand:SI 0 "register_operand" "") (reg:SI 104))]
+ ""
+{
+})
+
+(define_insn "*mulsi3_prumac"
+ [(set (reg:SI 104) (mult:SI (reg:SI 112) (reg:SI 116)))]
+ ""
+ "nop\;xin\\t0, r26, 4"
+ [(set_attr "type" "alu")
+ (set_attr "length" "8")])
+
+;; Prologue, Epilogue and Return
+
+(define_expand "prologue"
+ [(const_int 1)]
+ ""
+{
+ pru_expand_prologue ();
+ DONE;
+})
+
+(define_expand "epilogue"
+ [(return)]
+ ""
+{
+ pru_expand_epilogue (false);
+ DONE;
+})
+
+(define_expand "sibcall_epilogue"
+ [(return)]
+ ""
+{
+ pru_expand_epilogue (true);
+ DONE;
+})
+
+(define_insn "return"
+ [(simple_return)]
+ "pru_can_use_return_insn ()"
+ "ret")
+
+(define_insn "simple_return"
+ [(simple_return)]
+ ""
+ "ret")
+
+;; Block any insns from being moved before this point, since the
+;; profiling call to mcount can use various registers that aren't
+;; saved or used to pass arguments.
+
+(define_insn "blockage"
+ [(unspec_volatile [(const_int 0)] UNSPECV_BLOCKAGE)]
+ ""
+ ""
+ [(set_attr "type" "unknown")
+ (set_attr "length" "0")])
+
+;; Jumps and calls
+
+(define_insn "indirect_jump"
+ [(set (pc) (match_operand:SI 0 "register_operand" "r"))]
+ ""
+ "jmp\\t%0"
+ [(set_attr "type" "control")])
+
+(define_insn "jump"
+ [(set (pc)
+ (label_ref (match_operand 0 "" "")))]
+ ""
+ "jmp\\t%%label(%l0)"
+ [(set_attr "type" "control")
+ (set_attr "length" "4")])
+
+
+(define_expand "call"
+ [(parallel [(call (match_operand 0 "" "")
+ (match_operand 1 "" ""))
+ (clobber (reg:HI RA_REGNO))])]
+ ""
+ "")
+
+(define_expand "call_value"
+ [(parallel [(set (match_operand 0 "" "")
+ (call (match_operand 1 "" "")
+ (match_operand 2 "" "")))
+ (clobber (reg:HI RA_REGNO))])]
+ ""
+ "")
+
+(define_insn "*call"
+ [(call (mem:SI (match_operand:SI 0 "call_operand" "i,r"))
+ (match_operand 1 "" ""))
+ (clobber (reg:HI RA_REGNO))]
+ ""
+ "@
+ call\\t%%label(%0)
+ call\\t%0"
+ [(set_attr "type" "control")])
+
+(define_insn "*call_value"
+ [(set (match_operand 0 "" "")
+ (call (mem:SI (match_operand:SI 1 "call_operand" "i,r"))
+ (match_operand 2 "" "")))
+ (clobber (reg:HI RA_REGNO))]
+ ""
+ "@
+ call\\t%%label(%1)
+ call\\t%1"
+ [(set_attr "type" "control")])
+
+(define_expand "sibcall"
+ [(parallel [(call (match_operand 0 "" "")
+ (match_operand 1 "" ""))
+ (return)])]
+ ""
+ "")
+
+(define_expand "sibcall_value"
+ [(parallel [(set (match_operand 0 "" "")
+ (call (match_operand 1 "" "")
+ (match_operand 2 "" "")))
+ (return)])]
+ ""
+ "")
+
+(define_insn "*sibcall"
+ [(call (mem:SI (match_operand:SI 0 "call_operand" "i,j"))
+ (match_operand 1 "" ""))
+ (return)]
+ "SIBLING_CALL_P (insn)"
+ "@
+ jmp\\t%%label(%0)
+ jmp\\t%0"
+ [(set_attr "type" "control")])
+
+(define_insn "*sibcall_value"
+ [(set (match_operand 0 "register_operand" "")
+ (call (mem:SI (match_operand:SI 1 "call_operand" "i,j"))
+ (match_operand 2 "" "")))
+ (return)]
+ "SIBLING_CALL_P (insn)"
+ "@
+ jmp\\t%%label(%1)
+ jmp\\t%1"
+ [(set_attr "type" "control")])
+
+(define_insn "*tablejump"
+ [(set (pc)
+ (match_operand:SI 0 "register_operand" "r"))
+ (use (label_ref (match_operand 1 "" "")))]
+ ""
+ "jmp\\t%0"
+ [(set_attr "type" "control")])
+
+;; cbranch pattern.
+;;
+;; NOTE: The short branch check has no typo! We must be conservative and take
+;; into account the worst case of having a signed comparison with a
+;; "far taken branch" label, which amounts to 7 instructions.
+
+(define_insn "cbranch<mode>4"
+ [(set (pc)
+ (if_then_else
+ (match_operator 0 "ordered_comparison_operator"
+ [(match_operand:QISI 1 "register_operand" "r,r,r")
+ (match_operand:QISI 2 "reg_or_ubyte_operand" "r,Z,I")])
+ (label_ref (match_operand 3 "" ""))
+ (pc)))]
+ ""
+{
+ const int length = (get_attr_length (insn));
+ const bool is_near = (length == 20 || length == 4);
+
+ if (pru_signed_cmp_operator (operands[0], VOIDmode))
+ {
+ enum rtx_code code = GET_CODE (operands[0]);
+
+ if (which_alternative == 0)
+ return pru_output_signed_cbranch (operands, is_near);
+ else if (which_alternative == 1 && (code == LT || code == GE))
+ return pru_output_signed_cbranch_zeroop2 (operands, is_near);
+ else
+ return pru_output_signed_cbranch_ubyteop2 (operands, is_near);
+ }
+ else
+ {
+ /* PRU demands OP1 to be immediate, so swap operands. */
+ if (is_near)
+ return "qb%P0\t%l3, %1, %2";
+ else
+ return "qb%Q0\t.+8, %1, %2\;jmp\t%%label(%l3)";
+ }
+}
+ [(set_attr "type" "control")
+ (set (attr "length")
+ (if_then_else
+ (and (ge (minus (match_dup 3) (pc)) (const_int -2020))
+ (le (minus (match_dup 3) (pc)) (const_int 2016)))
+ (if_then_else
+ (match_test "pru_signed_cmp_operator (operands[0], VOIDmode)")
+ (const_int 20)
+ (const_int 4))
+ (if_then_else
+ (match_test "pru_signed_cmp_operator (operands[0], VOIDmode)")
+ (const_int 28)
+ (const_int 8))))])
+
+
+(define_expand "cbranch<mode>4"
+ [(set (pc)
+ (if_then_else (match_operator 0 "pru_fp_comparison_operator"
+ [(match_operand:SFDF 1 "register_operand" "")
+ (match_operand:SFDF 2 "register_operand" "")])
+ (label_ref (match_operand 3 "" ""))
+ (pc)))]
+ ""
+{
+ rtx t = pru_expand_fp_compare (operands[0], VOIDmode);
+ operands[0] = t;
+ operands[1] = XEXP (t, 0);
+ operands[2] = XEXP (t, 1);
+})
+
+;
+; Bit test branch
+
+(define_code_iterator BIT_TEST [eq ne])
+(define_code_attr qbbx_op [(eq "qbbc") (ne "qbbs")])
+(define_code_attr qbbx_negop [(eq "qbbs") (ne "qbbc")])
+
+(define_insn "cbranch_qbbx_<BIT_TEST:code><EQS0:mode><EQS1:mode><EQD:mode>4"
+ [(set (pc)
+ (if_then_else
+ (BIT_TEST (zero_extract:EQD
+ (match_operand:EQS0 0 "register_operand" "r")
+ (const_int 1)
+ (match_operand:EQS1 1 "reg_or_ubyte_operand" "rI"))
+ (const_int 0))
+ (label_ref (match_operand 2 "" ""))
+ (pc)))]
+ ""
+{
+ const int length = (get_attr_length (insn));
+ const bool is_near = (length == 4);
+ if (is_near)
+ return "<BIT_TEST:qbbx_op>\\t%l2, %0, %1";
+ else
+ return "<BIT_TEST:qbbx_negop>\\t.+8, %0, %1\;jmp\\t%%label(%l2)";
+}
+ [(set_attr "type" "control")
+ (set (attr "length")
+ (if_then_else
+ (and (ge (minus (match_dup 2) (pc)) (const_int -2048))
+ (le (minus (match_dup 2) (pc)) (const_int 2044)))
+ (const_int 4)
+ (const_int 8)))])
+
+;; ::::::::::::::::::::
+;; ::
+;; :: Low Overhead Looping - idea "borrowed" from MEP
+;; ::
+;; ::::::::::::::::::::
+
+;; This insn is volatile because we'd like it to stay in its original
+;; position, just before the loop header. If it stays there, we might
+;; be able to convert it into a "loop" insn.
+(define_insn "doloop_begin_internal<mode>"
+ [(set (match_operand:HISI 0 "register_operand" "=r")
+ (unspec_volatile:HISI
+ [(match_operand:HISI 1 "reg_or_ubyte_operand" "rI")
+ (match_operand 2 "const_int_operand" "")] UNSPECV_LOOP_BEGIN))]
+ ""
+ { gcc_unreachable (); }
+ [(set_attr "length" "4")])
+
+(define_expand "doloop_begin"
+ [(use (match_operand 0 "register_operand" ""))
+ (use (match_operand 1 "" ""))]
+ "TARGET_OPT_LOOP"
+ "pru_emit_doloop (operands, 0);
+ DONE;
+ ")
+
+; Note: "JUMP_INSNs and CALL_INSNs are not allowed to have any output
+; reloads;". Hence this insn must be prepared for a counter that is
+; not a register.
+(define_insn "doloop_end_internal<mode>"
+ [(set (pc)
+ (if_then_else (ne (match_operand:HISI 0 "nonimmediate_operand" "+r,*m")
+ (const_int 1))
+ (label_ref (match_operand 1 "" ""))
+ (pc)))
+ (set (match_dup 0)
+ (plus:HISI (match_dup 0)
+ (const_int -1)))
+ (unspec [(match_operand 2 "const_int_operand" "")] UNSPECV_LOOP_END)
+ (clobber (match_scratch:HISI 3 "=X,&r"))]
+ ""
+ { gcc_unreachable (); }
+ ;; Worst case length:
+ ;;
+ ;; sub <op3>, 1 4
+ ;; qbeq .+8, <op3>, 0 4
+ ;; jmp <op1> 4
+ [(set (attr "length")
+ (if_then_else
+ (and (ge (minus (pc) (match_dup 1)) (const_int 0))
+ (le (minus (pc) (match_dup 1)) (const_int 1020)))
+ (const_int 4)
+ (const_int 12)))])
+
+(define_expand "doloop_end"
+ [(use (match_operand 0 "nonimmediate_operand" ""))
+ (use (label_ref (match_operand 1 "" "")))]
+ "TARGET_OPT_LOOP"
+ "if (GET_CODE (operands[0]) == REG && GET_MODE (operands[0]) == QImode)
+ FAIL;
+ pru_emit_doloop (operands, 1);
+ DONE;
+ ")
+
+(define_insn "pruloop<mode>"
+ [(set (reg:HISI LOOPCNTR_REG)
+ (unspec:HISI [(match_operand:HISI 0 "reg_or_ubyte_operand" "rI")
+ (label_ref (match_operand 1 "" ""))]
+ UNSPECV_LOOP_BEGIN))]
+ ""
+ "loop\\t%l1, %0"
+ [(set_attr "length" "4")])
+
+(define_insn "pruloop_end"
+ [(unspec [(const_int 0)] UNSPECV_LOOP_END)]
+ ""
+ "# loop end"
+ [(set_attr "length" "0")])
+
+
+;; Misc patterns
+
+(define_insn "delay_cycles_start"
+ [(unspec_volatile [(match_operand 0 "immediate_operand" "i")]
+ UNSPECV_DELAY_CYCLES_START)]
+ ""
+ "/* Begin %0 cycle delay. */"
+)
+
+(define_insn "delay_cycles_end"
+ [(unspec_volatile [(match_operand 0 "immediate_operand" "i")]
+ UNSPECV_DELAY_CYCLES_END)]
+ ""
+ "/* End %0 cycle delay. */"
+)
+
+
+(define_insn "delay_cycles_2x_plus1_hi"
+ [(unspec_volatile [(match_operand 0 "const_uhword_operand" "J")]
+ UNSPECV_DELAY_CYCLES_2X_HI)
+ (clobber (match_scratch:SI 1 "=&r"))]
+ ""
+ "ldi\\t%1, %0\;sub\\t%1, %1, 1\;qbne\\t.-4, %1, 0"
+ [(set_attr "length" "12")])
+
+
+; Do not use LDI32 here because we do not want
+; to accidentally loose one instruction cycle.
+(define_insn "delay_cycles_2x_plus2_si"
+ [(unspec_volatile [(match_operand:SI 0 "const_int_operand" "n")]
+ UNSPECV_DELAY_CYCLES_2X_SI)
+ (clobber (match_scratch:SI 1 "=&r"))]
+ ""
+ "ldi\\t%1.w0, %L0\;ldi\\t%1.w2, %H0\;sub\\t%1, %1, 1\;qbne\\t.-4, %1, 0"
+ [(set_attr "length" "16")])
+
+(define_insn "delay_cycles_1"
+ [(unspec_volatile [(const_int 0) ] UNSPECV_DELAY_CYCLES_1)]
+ ""
+ "nop\\t# delay_cycles_1"
+)
+
+
+(define_insn "nop"
+ [(const_int 0)]
+ ""
+ "nop"
+ [(set_attr "type" "alu")])
+
+(define_insn "nop_loop_guard"
+ [(const_int 0)]
+ ""
+ "nop\\t# Loop end guard"
+ [(set_attr "type" "alu")])
diff --git a/gcc/config/pru/pru.opt b/gcc/config/pru/pru.opt
new file mode 100644
index 00000000000..e17d92fe1d3
--- /dev/null
+++ b/gcc/config/pru/pru.opt
@@ -0,0 +1,53 @@
+; Options for the TI PRU port of the compiler.
+; Copyright (C) 2018 Free Software Foundation, Inc.
+; Contributed by Dimitar Dimitrov <dimitar@dinux.eu>
+;
+; This file is part of GCC.
+;
+; GCC is free software; you can redistribute it and/or modify
+; it under the terms of the GNU General Public License as published by
+; the Free Software Foundation; either version 3, or (at your option)
+; any later version.
+;
+; GCC is distributed in the hope that it will be useful,
+; but WITHOUT ANY WARRANTY; without even the implied warranty of
+; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+; GNU General Public License for more details.
+;
+; You should have received a copy of the GNU General Public License
+; along with GCC; see the file COPYING3. If not see
+; <http://www.gnu.org/licenses/>.
+
+HeaderInclude
+config/pru/pru-opts.h
+
+minrt
+Target Report Mask(MINRT) RejectNegative
+Use a minimum runtime (no static initializers or ctors) for memory-constrained
+devices.
+
+mmcu=
+Target RejectNegative Joined
+-mmcu=MCU Select the target System-On-Chip variant that embeds this PRU.
+
+mno-relax
+Target Report
+Prevent relaxation of LDI32 relocations.
+
+mloop
+Target Mask(OPT_LOOP)
+Allow (or do not allow) gcc to use the LOOP instruction.
+
+mabi=
+Target RejectNegative Report Joined Enum(pru_abi_t) Var(pru_current_abi) Init(PRU_ABI_GNU) Save
+Select target ABI variant.
+
+Enum
+Name(pru_abi_t) Type(enum pru_abi)
+ABI variant code generation (for use with -mabi= option):
+
+EnumValue
+Enum(pru_abi_t) String(gnu) Value(PRU_ABI_GNU)
+
+EnumValue
+Enum(pru_abi_t) String(ti) Value(PRU_ABI_TI)
diff --git a/gcc/config/pru/t-pru b/gcc/config/pru/t-pru
new file mode 100644
index 00000000000..ab29e443882
--- /dev/null
+++ b/gcc/config/pru/t-pru
@@ -0,0 +1,31 @@
+# Makefile fragment for building GCC for the TI PRU target.
+# Copyright (C) 2012-2018 Free Software Foundation, Inc.
+# Contributed by Dimitar Dimitrov <dimitar.dinux.eu>
+# Based on the t-nios2
+#
+# This file is part of GCC.
+#
+# GCC is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published
+# by the Free Software Foundation; either version 3, or (at your
+# option) any later version.
+#
+# GCC is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public
+# License along with GCC; see the file COPYING3. If not see
+# <http://www.gnu.org/licenses/>.
+
+# Unfortunately mabi=ti is not feature-complete enough to build newlib.
+# Hence we cannot present mabi=gnu/ti as a multilib option.
+
+pru-pragma.o: $(srcdir)/config/pru/pru-pragma.c $(RTL_H) $(TREE_H) \
+ $(CONFIG_H) $(TM_H) $(srcdir)/config/pru/pru-protos.h
+ $(COMPILER) -c $(ALL_COMPILERFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $<
+
+pru-passes.o: $(srcdir)/config/pru/pru-passes.c $(RTL_H) $(TREE_H) \
+ $(CONFIG_H) $(TM_H) $(srcdir)/config/pru/pru-protos.h
+ $(COMPILER) -c $(ALL_COMPILERFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $<
diff --git a/gcc/doc/extend.texi b/gcc/doc/extend.texi
index 4b606c007d8..c8a39c3fa1a 100644
--- a/gcc/doc/extend.texi
+++ b/gcc/doc/extend.texi
@@ -21781,6 +21781,7 @@ for further explanation.
* ARM Pragmas::
* M32C Pragmas::
* MeP Pragmas::
+* PRU Pragmas::
* RS/6000 and PowerPC Pragmas::
* S/390 Pragmas::
* Darwin Pragmas::
@@ -21932,6 +21933,26 @@ extern int foo ();
@end table
+@node PRU Pragmas
+@subsection PRU Pragmas
+
+@table @code
+
+@item ctable_entry @var{index} @var{constant_address}
+@cindex pragma, ctable_entry
+Specifies that the given PRU CTABLE entry at @var{index} has a value
+@var{constant_address}. This enables GCC to emit LBCO/SBCO instructions
+when the load/store address is known and can be addressed with some CTABLE
+entry. Example:
+
+@smallexample
+/* will compile to "lbco Rx, 2, 0x10, 4" */
+#pragma ctable_entry 2 0x4802a000
+*(unsigned int *)0x4802a010 = val;
+@end smallexample
+
+@end table
+
@node RS/6000 and PowerPC Pragmas
@subsection RS/6000 and PowerPC Pragmas
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index 8ac29fd48e1..a1fe70a53a5 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -1055,6 +1055,10 @@ See RS/6000 and PowerPC Options.
-mstack-protector-guard=@var{guard} -mstack-protector-guard-reg=@var{reg} @gol
-mstack-protector-guard-offset=@var{offset}}
+@emph{PRU Options}
+@gccoptlist{-mmcu=@var{mcu} -minrt -mno-relax -mloop @gol
+-mabi=@var{variant} @gol}
+
@emph{RISC-V Options}
@gccoptlist{-mbranch-cost=@var{N-instruction} @gol
-mplt -mno-plt @gol
@@ -14765,6 +14769,7 @@ platform.
* picoChip Options::
* PowerPC Options::
* PowerPC SPE Options::
+* PRU Options::
* RISC-V Options::
* RL78 Options::
* RS/6000 and PowerPC Options::
@@ -23444,6 +23449,56 @@ the offset with a symbol reference to a canary in the TLS block.
@end table
+@node PRU Options
+@subsection PRU Options
+@cindex PRU Options
+
+These command-line options are defined for PRU target:
+
+@table @gcctabopt
+@item -minrt
+@opindex minrt
+Enable the use of a minimum runtime environment---no static
+initializers or constructors. Results in significant code size
+reduction of final ELF binaries.
+
+@item -mmcu=@var{mcu}
+@opindex mmcu
+Specify the PRU MCU variant to use. Check Newlib for exact list of options.
+
+@item -mno-relax
+@opindex mno-relax
+Pass on (or do not pass on) the @option{-mrelax} command-line option
+to the linker.
+
+@item -mloop
+@opindex mloop
+Allow (or do not allow) GCC to use the LOOP instruction.
+
+@item -mabi=@var{variant}
+@opindex mabi
+Specify the ABI variant to output code for. Permissible values are @samp{gnu}
+for GCC, and @samp{ti} for fully conformant TI ABI. These are the differences:
+
+@table @samp
+@item Function Pointer Size
+TI ABI specifies that function (code) pointers are 16-bit, whereas GCC
+supports only 32-bit data and code pointers.
+
+@item Optional Return Value Pointer
+Function return values larger than 64 bits are passed by using a hidden
+pointer as the first argument of the function. TI ABI, though, mandates that
+the pointer can be NULL in case the caller is not using the returned value.
+GCC always passes and expects a valid return value pointer.
+
+@end table
+
+The current @samp{mabi=ti} implementation simply raises a compile error
+when any of the above code constructs is detected.
+
+@end table
+
+
@node RISC-V Options
@subsection RISC-V Options
@cindex RISC-V Options
diff --git a/gcc/doc/md.texi b/gcc/doc/md.texi
index 4801d68a207..adcbf578cfc 100644
--- a/gcc/doc/md.texi
+++ b/gcc/doc/md.texi
@@ -3353,6 +3353,28 @@ Vector constant that is all zeros.
@end table
+@item PRU---@file{config/pru/constraints.md}
+@table @code
+@item I
+An unsigned 8-bit integer constant.
+
+@item J
+An unsigned 16-bit integer constant.
+
+@item L
+An unsigned 5-bit integer constant (for shift counts).
+
+@item M
+An integer constant in the range [-255;0].
+
+@item T
+A text segment (program memory) constant label.
+
+@item Z
+Integer constant zero.
+
+@end table
+
@item RL78---@file{config/rl78/constraints.md}
@table @code
--
2.11.0