This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
Re: [PATCH] --enable-cet={yes,no,auto} with default no
On Thu, 19 Apr 2018, Jakub Jelinek wrote:
> On Wed, Apr 18, 2018 at 12:24:15PM -0700, H.J. Lu wrote:
> > >> So untested patch would be something like:
> > >
> > > Yes, this is what I think should be the most appropriate approach.
>
> Here is the patch with slightly tweaked install.texi and the all the
> regenerated bits too.
>
> Bootstrapped/regtested on x86_64-linux and i686-linux (without any of
> --enable-cet*/--disable-cet, with no -fct-protection -mcet in libraries,
> change compared to previous bootstrap), additionally tested
> (non-bootstrap build) with --enable-cet=auto, --disable-cet and --enable-cet .
> Ok for trunk?
OK.
Richard.
> 2018-04-18 Jakub Jelinek <jakub@redhat.com>
>
> * config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
> --enable-cet=default with --enable-cet=auto.
>
> * doc/install.texi: Document --disable-cet being the default and
> --enable-cet=auto.
>
> * configure: Regenerated.
>
> --- config/cet.m4.jj 2018-02-19 19:57:05.221280084 +0100
> +++ config/cet.m4 2018-04-18 14:05:31.514859185 +0200
> @@ -3,14 +3,14 @@ dnl GCC_CET_FLAGS
> dnl (SHELL-CODE_HANDLER)
> dnl
> AC_DEFUN([GCC_CET_FLAGS],[dnl
> -GCC_ENABLE(cet, default, ,[enable Intel CET in target libraries],
> - permit yes|no|default)
> +GCC_ENABLE(cet, no, ,[enable Intel CET in target libraries],
> + permit yes|no|auto)
> AC_MSG_CHECKING([for CET support])
>
> case "$host" in
> i[[34567]]86-*-linux* | x86_64-*-linux*)
> case "$enable_cet" in
> - default)
> + auto)
> # Check if target supports multi-byte NOPs
> # and if assembler supports CET insn.
> AC_COMPILE_IFELSE(
> --- gcc/doc/install.texi.jj 2018-02-08 12:21:20.791749480 +0100
> +++ gcc/doc/install.texi 2018-04-18 14:07:19.637901528 +0200
> @@ -2103,10 +2103,11 @@ instrumentation, see @option{-fcf-protec
> to add @option{-fcf-protection} and, if needed, other target
> specific options to a set of building options.
>
> -The option is enabled by default on Linux/x86 if target binutils
> -supports @code{Intel CET} instructions. In this case the target
> -libraries are configured to get additional @option{-fcf-protection}
> -and @option{-mcet} options.
> +The option is disabled by default. When @code{--enable-cet=auto}
> +is used, it is enabled on Linux/x86 if target binutils
> +supports @code{Intel CET} instructions and disabled otherwise.
> +In this case the target libraries are configured to get additional
> +@option{-fcf-protection} and @option{-mcet} options.
> @end table
>
> @subheading Cross-Compiler-Specific Options
>
> --- libatomic/configure (revision 259476)
> +++ libatomic/configure (working copy)
> @@ -1414,8 +1414,7 @@ Optional Features:
> (and sometimes confusing) to the casual installer
> --enable-symvers=STYLE enables symbol versioning of the shared library
> [default=yes]
> - --enable-cet enable Intel CET in target libraries
> - [default=default]
> + --enable-cet enable Intel CET in target libraries [default=no]
>
> Optional Packages:
> --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
> @@ -11121,7 +11120,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 11124 "configure"
> +#line 11123 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -11227,7 +11226,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 11230 "configure"
> +#line 11229 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -15305,12 +15304,12 @@ fi
> if test "${enable_cet+set}" = set; then :
> enableval=$enable_cet;
> case "$enableval" in
> - yes|no|default) ;;
> + yes|no|auto) ;;
> *) as_fn_error "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
> esac
>
> else
> - enable_cet=default
> + enable_cet=no
> fi
>
>
> @@ -15320,7 +15319,7 @@ $as_echo_n "checking for CET support...
> case "$host" in
> i[34567]86-*-linux* | x86_64-*-linux*)
> case "$enable_cet" in
> - default)
> + auto)
> # Check if target supports multi-byte NOPs
> # and if assembler supports CET insn.
> cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> --- libbacktrace/configure (revision 259476)
> +++ libbacktrace/configure (working copy)
> @@ -1386,8 +1386,7 @@ Optional Features:
> optimize for fast installation [default=yes]
> --disable-libtool-lock avoid locking (might break parallel builds)
> --disable-largefile omit support for large files
> - --enable-cet enable Intel CET in target libraries
> - [default=default]
> + --enable-cet enable Intel CET in target libraries [default=no]
> --enable-host-shared build host code as shared libraries
>
> Optional Packages:
> @@ -11149,7 +11148,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 11152 "configure"
> +#line 11151 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -11255,7 +11254,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 11258 "configure"
> +#line 11257 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -11793,12 +11792,12 @@ if test -n "${with_target_subdir}"; then
> if test "${enable_cet+set}" = set; then :
> enableval=$enable_cet;
> case "$enableval" in
> - yes|no|default) ;;
> + yes|no|auto) ;;
> *) as_fn_error "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
> esac
>
> else
> - enable_cet=default
> + enable_cet=no
> fi
>
>
> @@ -11808,7 +11807,7 @@ $as_echo_n "checking for CET support...
> case "$host" in
> i[34567]86-*-linux* | x86_64-*-linux*)
> case "$enable_cet" in
> - default)
> + auto)
> # Check if target supports multi-byte NOPs
> # and if assembler supports CET insn.
> cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> --- libgcc/configure (revision 259476)
> +++ libgcc/configure (working copy)
> @@ -1316,8 +1316,7 @@ Optional Features:
> enable decimal float extension to C. Selecting 'bid'
> or 'dpd' choses which decimal floating point format
> to use
> - --enable-cet enable Intel CET in target libraries
> - [default=default]
> + --enable-cet enable Intel CET in target libraries [default=no]
> --enable-explicit-exception-frame-registration
> register exception tables explicitly at module
> start, for use e.g. for compatibility with
> @@ -4781,12 +4780,12 @@ $as_echo "$ac_cv_sjlj_exceptions" >&6; }
> if test "${enable_cet+set}" = set; then :
> enableval=$enable_cet;
> case "$enableval" in
> - yes|no|default) ;;
> + yes|no|auto) ;;
> *) as_fn_error "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
> esac
>
> else
> - enable_cet=default
> + enable_cet=no
> fi
>
>
> @@ -4796,7 +4795,7 @@ $as_echo_n "checking for CET support...
> case "$host" in
> i[34567]86-*-linux* | x86_64-*-linux*)
> case "$enable_cet" in
> - default)
> + auto)
> # Check if target supports multi-byte NOPs
> # and if assembler supports CET insn.
> cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> --- libgfortran/configure (revision 259476)
> +++ libgfortran/configure (working copy)
> @@ -1425,8 +1425,7 @@ Optional Features:
> --enable-multilib build many library versions (default)
> --disable-dependency-tracking speeds up one-time build
> --enable-dependency-tracking do not reject slow dependency extractors
> - --enable-cet enable Intel CET in target libraries
> - [default=default]
> + --enable-cet enable Intel CET in target libraries [default=no]
> --disable-symvers disable symbol versioning for libgfortran
> --enable-shared[=PKGS] build shared libraries [default=yes]
> --enable-static[=PKGS] build static libraries [default=yes]
> @@ -5795,12 +5794,12 @@ fi
> if test "${enable_cet+set}" = set; then :
> enableval=$enable_cet;
> case "$enableval" in
> - yes|no|default) ;;
> + yes|no|auto) ;;
> *) as_fn_error "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
> esac
>
> else
> - enable_cet=default
> + enable_cet=no
> fi
>
>
> @@ -5810,7 +5809,7 @@ $as_echo_n "checking for CET support...
> case "$host" in
> i[34567]86-*-linux* | x86_64-*-linux*)
> case "$enable_cet" in
> - default)
> + auto)
> # Check if target supports multi-byte NOPs
> # and if assembler supports CET insn.
> cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> @@ -12513,7 +12512,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 12516 "configure"
> +#line 12515 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -12619,7 +12618,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 12622 "configure"
> +#line 12621 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> --- libgomp/configure (revision 259476)
> +++ libgomp/configure (working copy)
> @@ -1452,8 +1452,7 @@ Optional Features:
> --enable-tls Use thread-local storage [default=yes]
> --enable-symvers=STYLE enables symbol versioning of the shared library
> [default=yes]
> - --enable-cet enable Intel CET in target libraries
> - [default=default]
> + --enable-cet enable Intel CET in target libraries [default=no]
>
> Optional Packages:
> --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
> @@ -11158,7 +11157,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 11161 "configure"
> +#line 11160 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -11264,7 +11263,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 11267 "configure"
> +#line 11266 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -16624,12 +16623,12 @@ XCFLAGS="$XCFLAGS$XPCFLAGS"
> if test "${enable_cet+set}" = set; then :
> enableval=$enable_cet;
> case "$enableval" in
> - yes|no|default) ;;
> + yes|no|auto) ;;
> *) as_fn_error "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
> esac
>
> else
> - enable_cet=default
> + enable_cet=no
> fi
>
>
> @@ -16639,7 +16638,7 @@ $as_echo_n "checking for CET support...
> case "$host" in
> i[34567]86-*-linux* | x86_64-*-linux*)
> case "$enable_cet" in
> - default)
> + auto)
> # Check if target supports multi-byte NOPs
> # and if assembler supports CET insn.
> cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> --- libitm/configure (revision 259476)
> +++ libitm/configure (working copy)
> @@ -1427,8 +1427,7 @@ Optional Features:
> --enable-tls Use thread-local storage [default=yes]
> --enable-symvers=STYLE enables symbol versioning of the shared library
> [default=yes]
> - --enable-cet enable Intel CET in target libraries
> - [default=default]
> + --enable-cet enable Intel CET in target libraries [default=no]
>
> Optional Packages:
> --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
> @@ -11797,7 +11796,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 11800 "configure"
> +#line 11799 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -11903,7 +11902,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 11906 "configure"
> +#line 11905 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -17594,12 +17593,12 @@ XCFLAGS="$XCFLAGS $XPCFLAGS"
> if test "${enable_cet+set}" = set; then :
> enableval=$enable_cet;
> case "$enableval" in
> - yes|no|default) ;;
> + yes|no|auto) ;;
> *) as_fn_error "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
> esac
>
> else
> - enable_cet=default
> + enable_cet=no
> fi
>
>
> @@ -17609,7 +17608,7 @@ $as_echo_n "checking for CET support...
> case "$host" in
> i[34567]86-*-linux* | x86_64-*-linux*)
> case "$enable_cet" in
> - default)
> + auto)
> # Check if target supports multi-byte NOPs
> # and if assembler supports CET insn.
> cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> --- libmpx/configure (revision 259476)
> +++ libmpx/configure (working copy)
> @@ -1373,8 +1373,7 @@ Optional Features:
> --enable-fast-install[=PKGS]
> optimize for fast installation [default=yes]
> --disable-libtool-lock avoid locking (might break parallel builds)
> - --enable-cet enable Intel CET in target libraries
> - [default=default]
> + --enable-cet enable Intel CET in target libraries [default=no]
>
> Optional Packages:
> --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
> @@ -11237,7 +11236,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 11240 "configure"
> +#line 11239 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -11343,7 +11342,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 11346 "configure"
> +#line 11345 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -11589,12 +11588,12 @@ XCFLAGS="-Wall -Wextra"
> if test "${enable_cet+set}" = set; then :
> enableval=$enable_cet;
> case "$enableval" in
> - yes|no|default) ;;
> + yes|no|auto) ;;
> *) as_fn_error "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
> esac
>
> else
> - enable_cet=default
> + enable_cet=no
> fi
>
>
> @@ -11604,7 +11603,7 @@ $as_echo_n "checking for CET support...
> case "$host" in
> i[34567]86-*-linux* | x86_64-*-linux*)
> case "$enable_cet" in
> - default)
> + auto)
> # Check if target supports multi-byte NOPs
> # and if assembler supports CET insn.
> cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> --- libobjc/configure (revision 259476)
> +++ libobjc/configure (working copy)
> @@ -1352,8 +1352,7 @@ Optional Features:
> --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
> --enable-version-specific-runtime-libs Specify that runtime libraries should be installed in a compiler-specific directory
> --enable-multilib build many library versions (default)
> - --enable-cet enable Intel CET in target libraries
> - [default=default]
> + --enable-cet enable Intel CET in target libraries [default=no]
> --enable-maintainer-mode enable make rules and dependencies not useful
> (and sometimes confusing) to the casual installer
> --enable-shared[=PKGS] build shared libraries [default=yes]
> @@ -3360,12 +3359,12 @@ esac
> if test "${enable_cet+set}" = set; then :
> enableval=$enable_cet;
> case "$enableval" in
> - yes|no|default) ;;
> + yes|no|auto) ;;
> *) as_fn_error "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
> esac
>
> else
> - enable_cet=default
> + enable_cet=no
> fi
>
>
> @@ -3375,7 +3374,7 @@ $as_echo_n "checking for CET support...
> case "$host" in
> i[34567]86-*-linux* | x86_64-*-linux*)
> case "$enable_cet" in
> - default)
> + auto)
> # Check if target supports multi-byte NOPs
> # and if assembler supports CET insn.
> cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> @@ -10683,7 +10682,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 10686 "configure"
> +#line 10685 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -10789,7 +10788,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 10792 "configure"
> +#line 10791 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> --- libquadmath/configure (revision 259476)
> +++ libquadmath/configure (working copy)
> @@ -1398,8 +1398,7 @@ Optional Features:
> --enable-maintainer-mode enable make rules and dependencies not useful
> (and sometimes confusing) to the casual installer
> --disable-symvers disable symbol versioning for libquadmath
> - --enable-cet enable Intel CET in target libraries
> - [default=default]
> + --enable-cet enable Intel CET in target libraries [default=no]
> --enable-generated-files-in-srcdir
> put copies of generated files in source dir intended
> for creating source tarballs for users without
> @@ -10576,7 +10575,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 10579 "configure"
> +#line 10578 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -10682,7 +10681,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 10685 "configure"
> +#line 10684 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -12828,12 +12827,12 @@ fi
> if test "${enable_cet+set}" = set; then :
> enableval=$enable_cet;
> case "$enableval" in
> - yes|no|default) ;;
> + yes|no|auto) ;;
> *) as_fn_error "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
> esac
>
> else
> - enable_cet=default
> + enable_cet=no
> fi
>
>
> @@ -12843,7 +12842,7 @@ $as_echo_n "checking for CET support...
> case "$host" in
> i[34567]86-*-linux* | x86_64-*-linux*)
> case "$enable_cet" in
> - default)
> + auto)
> # Check if target supports multi-byte NOPs
> # and if assembler supports CET insn.
> cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> --- libsanitizer/configure (revision 259476)
> +++ libsanitizer/configure (working copy)
> @@ -1425,8 +1425,7 @@ Optional Features:
> --enable-fast-install[=PKGS]
> optimize for fast installation [default=yes]
> --disable-libtool-lock avoid locking (might break parallel builds)
> - --enable-cet enable Intel CET in target libraries
> - [default=default]
> + --enable-cet enable Intel CET in target libraries [default=no]
>
> Optional Packages:
> --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
> @@ -12038,7 +12037,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 12041 "configure"
> +#line 12040 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -12144,7 +12143,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 12147 "configure"
> +#line 12146 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -16530,12 +16529,12 @@ fi
> if test "${enable_cet+set}" = set; then :
> enableval=$enable_cet;
> case "$enableval" in
> - yes|no|default) ;;
> + yes|no|auto) ;;
> *) as_fn_error "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
> esac
>
> else
> - enable_cet=default
> + enable_cet=no
> fi
>
>
> @@ -16545,7 +16544,7 @@ $as_echo_n "checking for CET support...
> case "$host" in
> i[34567]86-*-linux* | x86_64-*-linux*)
> case "$enable_cet" in
> - default)
> + auto)
> # Check if target supports multi-byte NOPs
> # and if assembler supports CET insn.
> cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> --- libssp/configure (revision 259476)
> +++ libssp/configure (working copy)
> @@ -1378,8 +1378,7 @@ Optional Features:
> --enable-multilib build many library versions (default)
> --disable-dependency-tracking speeds up one-time build
> --enable-dependency-tracking do not reject slow dependency extractors
> - --enable-cet enable Intel CET in target libraries
> - [default=default]
> + --enable-cet enable Intel CET in target libraries [default=no]
> --disable-symvers disable symbol versioning for libssp
> --enable-shared[=PKGS] build shared libraries [default=yes]
> --enable-static[=PKGS] build static libraries [default=yes]
> @@ -4086,12 +4085,12 @@ CFLAGS="$save_CFLAGS"
> if test "${enable_cet+set}" = set; then :
> enableval=$enable_cet;
> case "$enableval" in
> - yes|no|default) ;;
> + yes|no|auto) ;;
> *) as_fn_error "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
> esac
>
> else
> - enable_cet=default
> + enable_cet=no
> fi
>
>
> @@ -4101,7 +4100,7 @@ $as_echo_n "checking for CET support...
> case "$host" in
> i[34567]86-*-linux* | x86_64-*-linux*)
> case "$enable_cet" in
> - default)
> + auto)
> # Check if target supports multi-byte NOPs
> # and if assembler supports CET insn.
> cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> @@ -10760,7 +10759,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 10763 "configure"
> +#line 10762 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -10866,7 +10865,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 10869 "configure"
> +#line 10868 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> --- libstdc++-v3/configure (revision 259476)
> +++ libstdc++-v3/configure (working copy)
> @@ -1598,8 +1598,7 @@ Optional Features:
> enable C++11 threads support [default=auto]
> --enable-libstdcxx-filesystem-ts
> turns on ISO/IEC TS 18822 support [default=auto]
> - --enable-cet enable Intel CET in target libraries
> - [default=default]
> + --enable-cet enable Intel CET in target libraries [default=no]
> --enable-version-specific-runtime-libs
> Specify that runtime libraries should be installed
> in a compiler-specific directory
> @@ -11607,7 +11606,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 11610 "configure"
> +#line 11609 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -11713,7 +11712,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 11716 "configure"
> +#line 11715 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -15399,7 +15398,7 @@ $as_echo "$glibcxx_cv_atomic_long_long"
> # Fake what AC_TRY_COMPILE does.
>
> cat > conftest.$ac_ext << EOF
> -#line 15402 "configure"
> +#line 15401 "configure"
> int main()
> {
> typedef bool atomic_type;
> @@ -15434,7 +15433,7 @@ $as_echo "$glibcxx_cv_atomic_bool" >&6;
> rm -f conftest*
>
> cat > conftest.$ac_ext << EOF
> -#line 15437 "configure"
> +#line 15436 "configure"
> int main()
> {
> typedef short atomic_type;
> @@ -15469,7 +15468,7 @@ $as_echo "$glibcxx_cv_atomic_short" >&6;
> rm -f conftest*
>
> cat > conftest.$ac_ext << EOF
> -#line 15472 "configure"
> +#line 15471 "configure"
> int main()
> {
> // NB: _Atomic_word not necessarily int.
> @@ -15505,7 +15504,7 @@ $as_echo "$glibcxx_cv_atomic_int" >&6; }
> rm -f conftest*
>
> cat > conftest.$ac_ext << EOF
> -#line 15508 "configure"
> +#line 15507 "configure"
> int main()
> {
> typedef long long atomic_type;
> @@ -15586,7 +15585,7 @@ $as_echo "$as_me: WARNING: Performance o
> # unnecessary for this test.
>
> cat > conftest.$ac_ext << EOF
> -#line 15589 "configure"
> +#line 15588 "configure"
> int main()
> {
> _Decimal32 d1;
> @@ -15628,7 +15627,7 @@ ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
> # unnecessary for this test.
>
> cat > conftest.$ac_ext << EOF
> -#line 15631 "configure"
> +#line 15630 "configure"
> template<typename T1, typename T2>
> struct same
> { typedef T2 type; };
> @@ -15662,7 +15661,7 @@ $as_echo "$enable_int128" >&6; }
> rm -f conftest*
>
> cat > conftest.$ac_ext << EOF
> -#line 15665 "configure"
> +#line 15664 "configure"
> template<typename T1, typename T2>
> struct same
> { typedef T2 type; };
> @@ -81146,12 +81145,12 @@ CPU_OPT_BITS_RANDOM=config/${cpu_opt_bit
> if test "${enable_cet+set}" = set; then :
> enableval=$enable_cet;
> case "$enableval" in
> - yes|no|default) ;;
> + yes|no|auto) ;;
> *) as_fn_error "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
> esac
>
> else
> - enable_cet=default
> + enable_cet=no
> fi
>
>
> @@ -81161,7 +81160,7 @@ $as_echo_n "checking for CET support...
> case "$host" in
> i[34567]86-*-linux* | x86_64-*-linux*)
> case "$enable_cet" in
> - default)
> + auto)
> # Check if target supports multi-byte NOPs
> # and if assembler supports CET insn.
> cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> --- libvtv/configure (revision 259476)
> +++ libvtv/configure (working copy)
> @@ -1405,8 +1405,7 @@ Optional Features:
> --enable-fast-install[=PKGS]
> optimize for fast installation [default=yes]
> --disable-libtool-lock avoid locking (might break parallel builds)
> - --enable-cet enable Intel CET in target libraries
> - [default=default]
> + --enable-cet enable Intel CET in target libraries [default=no]
>
> Optional Packages:
> --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
> @@ -12069,7 +12068,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 12072 "configure"
> +#line 12071 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -12175,7 +12174,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 12178 "configure"
> +#line 12177 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -15464,12 +15463,12 @@ XCFLAGS="-D_GNU_SOURCE -Wall -Wextra -fn
> if test "${enable_cet+set}" = set; then :
> enableval=$enable_cet;
> case "$enableval" in
> - yes|no|default) ;;
> + yes|no|auto) ;;
> *) as_fn_error "Unknown argument to enable/disable cet" "$LINENO" 5 ;;
> esac
>
> else
> - enable_cet=default
> + enable_cet=no
> fi
>
>
> @@ -15479,7 +15478,7 @@ $as_echo_n "checking for CET support...
> case "$host" in
> i[34567]86-*-linux* | x86_64-*-linux*)
> case "$enable_cet" in
> - default)
> + auto)
> # Check if target supports multi-byte NOPs
> # and if assembler supports CET insn.
> cat confdefs.h - <<_ACEOF >conftest.$ac_ext
>
>
> Jakub
>
>
--
Richard Biener <rguenther@suse.de>
SUSE LINUX GmbH, GF: Felix Imendoerffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nuernberg)