This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
[SH][committed] Remove defunct mcbranchdi, mcmpeqdi options
- From: Oleg Endo <oleg dot endo at t-online dot de>
- To: gcc-patches <gcc-patches at gcc dot gnu dot org>
- Date: Mon, 02 May 2016 14:34:58 +0900
- Subject: [SH][committed] Remove defunct mcbranchdi, mcmpeqdi options
- Authentication-results: sourceware.org; auth=none
Hi,
The attached patch removes the defunct mcmpeqdi and mcmpeqdi options,
which have been obsoleted a while ago. Moreover, it seems that the
cbranchdi4 patterns can be simplified. CSiBE shows some code motion
and some +/- 4/8 bytes code size changes, but I didn't spot anything
special.
Tested on sh-elf with
make -k check RUNTESTFLAGS="--target_board=sh-sim\{-m2/-ml,-m2/-mb,
-m2a/-mb,-m4/-ml,-m4/-mb,-m4a/-ml,-m4a/-mb}"
Committed as r235698.
Index: gcc/config/sh/sh.c
===================================================================
--- gcc/config/sh/sh.c (revision 235697)
+++ gcc/config/sh/sh.c (working copy)
@@ -809,10 +809,6 @@
if (optimize > 1 && !optimize_size)
target_flags |= MASK_SAVE_ALL_TARGET_REGS;
- /* Set default values of TARGET_CBRANCHDI4 and TARGET_CMPEQDI_T. */
- TARGET_CBRANCHDI4 = 1;
- TARGET_CMPEQDI_T = 0;
-
sh_cpu = PROCESSOR_SH1;
assembler_dialect = 0;
if (TARGET_SH2)
@@ -1936,24 +1932,17 @@
prepare_cbranch_operands (rtx *operands, machine_mode mode,
enum rtx_code comparison)
{
- /* The scratch reg is only available when this is invoked from within
- the cbranchdi4_i splitter, through expand_cbranchdi4. */
- rtx scratch = NULL_RTX;
+ gcc_assert (can_create_pseudo_p ());
if (comparison == LAST_AND_UNUSED_RTX_CODE)
comparison = GET_CODE (operands[0]);
- else
- scratch = operands[4];
sh_canonicalize_comparison (comparison, operands[1], operands[2],
mode, false);
- /* Notice that this function is also invoked after reload by
- the cbranchdi4_i pattern, through expand_cbranchdi4. */
rtx op1 = operands[1];
+ operands[1] = force_reg (mode, op1);
- if (can_create_pseudo_p ())
- operands[1] = force_reg (mode, op1);
/* When we are handling DImode comparisons, we want to keep constants so
that we can optimize the component comparisons; however, memory loads
are better issued as a whole so that they can be scheduled well.
@@ -1969,15 +1958,8 @@
&& ((comparison != EQ && comparison != NE)
|| (REG_P (op1) && REGNO (op1) != R0_REG)
|| !satisfies_constraint_I08 (operands[2])))))
- {
- if (scratch && GET_MODE (scratch) == mode)
- {
- emit_move_insn (scratch, operands[2]);
- operands[2] = scratch;
- }
- else if (can_create_pseudo_p ())
- operands[2] = force_reg (mode, operands[2]);
- }
+ operands[2] = force_reg (mode, operands[2]);
+
return comparison;
}
@@ -2027,7 +2009,6 @@
int num_branches;
int prob, rev_prob;
int msw_taken_prob = -1, msw_skip_prob = -1, lsw_taken_prob = -1;
- rtx scratch = operands[4];
comparison = prepare_cbranch_operands (operands, DImode, comparison);
op1h = gen_highpart_mode (SImode, DImode, operands[1]);
@@ -2039,17 +2020,7 @@
rev_prob = REG_BR_PROB_BASE - prob;
switch (comparison)
{
- /* ??? Should we use the cmpeqdi_t pattern for equality comparisons?
- That costs 1 cycle more when the first branch can be predicted taken,
- but saves us mispredicts because only one branch needs prediction.
- It also enables generating the cmpeqdi_t-1 pattern. */
case EQ:
- if (TARGET_CMPEQDI_T)
- {
- emit_insn (gen_cmpeqdi_t (operands[1], operands[2]));
- emit_jump_insn (gen_branch_true (operands[3]));
- return true;
- }
msw_skip = NE;
lsw_taken = EQ;
if (prob >= 0)
@@ -2070,12 +2041,6 @@
}
break;
case NE:
- if (TARGET_CMPEQDI_T)
- {
- emit_insn (gen_cmpeqdi_t (operands[1], operands[2]));
- emit_jump_insn (gen_branch_false (operands[3]));
- return true;
- }
msw_taken = NE;
msw_taken_prob = prob;
lsw_taken = NE;
@@ -2152,15 +2117,7 @@
operands[1] = op1h;
operands[2] = op2h;
operands[4] = NULL_RTX;
- if (reload_completed
- && ! arith_reg_or_0_operand (op2h, SImode)
- && (true_regnum (op1h) || (comparison != EQ && comparison != NE))
- && (msw_taken != LAST_AND_UNUSED_RTX_CODE
- || msw_skip != LAST_AND_UNUSED_RTX_CODE))
- {
- emit_move_insn (scratch, operands[2]);
- operands[2] = scratch;
- }
+
if (msw_taken != LAST_AND_UNUSED_RTX_CODE)
expand_cbranchsi4 (operands, msw_taken, msw_taken_prob);
if (msw_skip != LAST_AND_UNUSED_RTX_CODE)
@@ -2173,13 +2130,6 @@
{
operands[1] = op1h;
operands[2] = op2h;
- if (reload_completed
- && ! arith_reg_or_0_operand (op2h, SImode)
- && (true_regnum (op1h) || (comparison != EQ && comparison != NE)))
- {
- emit_move_insn (scratch, operands[2]);
- operands[2] = scratch;
- }
}
operands[3] = skip_label = gen_label_rtx ();
@@ -2189,16 +2139,7 @@
operands[1] = op1l;
operands[2] = op2l;
if (lsw_taken != LAST_AND_UNUSED_RTX_CODE)
- {
- if (reload_completed
- && ! arith_reg_or_0_operand (op2l, SImode)
- && (true_regnum (op1l) || (lsw_taken != EQ && lsw_taken != NE)))
- {
- emit_move_insn (scratch, operands[2]);
- operands[2] = scratch;
- }
- expand_cbranchsi4 (operands, lsw_taken, lsw_taken_prob);
- }
+ expand_cbranchsi4 (operands, lsw_taken, lsw_taken_prob);
if (msw_skip != LAST_AND_UNUSED_RTX_CODE)
emit_label (skip_label);
return true;
Index: gcc/config/sh/sh.md
===================================================================
--- gcc/config/sh/sh.md (revision 235697)
+++ gcc/config/sh/sh.md (working copy)
@@ -1115,7 +1115,7 @@
(label_ref (match_operand 3 "" ""))
(pc)))
(clobber (reg:SI T_REG))]
- ""
+ "can_create_pseudo_p ()"
{
expand_cbranchsi4 (operands, LAST_AND_UNUSED_RTX_CODE, -1);
DONE;
@@ -1161,7 +1161,8 @@
(label_ref (match_dup 2))
(pc)))])
-;; FIXME: These could probably use code iterators for the compare op.
+;; FIXME: These don't seem to have any effect on the generated cbranch code
+;; anymore, but only on some register allocation choices.
(define_split
[(set (pc)
(if_then_else (le (match_operand:SI 0 "arith_reg_operand" "")
@@ -1255,49 +1256,13 @@
(define_expand "cbranchdi4"
[(set (pc)
(if_then_else (match_operator 0 "comparison_operator"
- [(match_operand:DI 1 "arith_operand" "")
- (match_operand:DI 2 "arith_operand" "")])
- (label_ref (match_operand 3 "" ""))
+ [(match_operand:DI 1 "arith_operand")
+ (match_operand:DI 2 "arith_operand")])
+ (label_ref (match_operand 3))
(pc)))
- (clobber (match_dup 4))
(clobber (reg:SI T_REG))]
- "TARGET_CBRANCHDI4 || TARGET_SH2"
+ "TARGET_SH2 && can_create_pseudo_p ()"
{
- enum rtx_code comparison;
-
- if (!TARGET_CBRANCHDI4)
- {
- sh_emit_compare_and_branch (operands, DImode);
- DONE;
- }
- else
- {
- if (expand_cbranchdi4 (operands, LAST_AND_UNUSED_RTX_CODE))
- DONE;
-
- comparison = prepare_cbranch_operands (operands, DImode,
- LAST_AND_UNUSED_RTX_CODE);
- if (comparison != GET_CODE (operands[0]))
- operands[0]
- = gen_rtx_fmt_ee (comparison, VOIDmode, operands[1], operands[2]);
- operands[4] = gen_rtx_SCRATCH (SImode);
- }
-})
-
-(define_insn_and_split "cbranchdi4_i"
- [(set (pc)
- (if_then_else (match_operator 0 "comparison_operator"
- [(match_operand:DI 1 "arith_operand" "r,r")
- (match_operand:DI 2 "arith_operand" "rN,I08")])
- (label_ref (match_operand 3 "" ""))
- (pc)))
- (clobber (match_scratch:SI 4 "=X,&r"))
- (clobber (reg:SI T_REG))]
- "TARGET_CBRANCHDI4"
- "#"
- "&& reload_completed"
- [(pc)]
-{
if (!expand_cbranchdi4 (operands, GET_CODE (operands[0])))
FAIL;
DONE;
Index: gcc/config/sh/sh.opt
===================================================================
--- gcc/config/sh/sh.opt (revision 235697)
+++ gcc/config/sh/sh.opt (working copy)
@@ -205,14 +205,6 @@
Target Report Var(TARGET_ZDCBRANCH)
Assume that zero displacement conditional branches are fast.
-mcbranchdi
-Target Undocumented Var(TARGET_CBRANCHDI4) Warn(%qs is deprecated and has no effect)
-Enable cbranchdi4 pattern.
-
-mcmpeqdi
-Target Undocumented Var(TARGET_CMPEQDI_T) Warn(%qs is deprecated and has no effect)
-Emit cmpeqdi_t pattern even when -mcbranchdi is in effect.
-
mcbranch-force-delay-slot
Target Report RejectNegative Var(TARGET_CBRANCH_FORCE_DELAY_SLOT) Init(0)
Force the usage of delay slots for conditional branches.