This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
[PATCH] Fixes combined gcc-binutils builds.
- From: Michael Darling <darlingm at gmail dot com>
- To: gcc-patches at gcc dot gnu dot org
- Date: Sun, 24 May 2015 15:56:13 -0400
- Subject: [PATCH] Fixes combined gcc-binutils builds.
- Authentication-results: sourceware.org; auth=none
Combined builds has been broken for about 10 months, because some
binutils configure.in files were renamed to configure.ac, but gcc's
references to them were not updated. There is a corresponding patch
submitted to binutils-gdb, which renames its few remaining configure.in
files to configure.ac. Otherwise, fixing the gcc calls to binutils-gdb
configure.* files would be more complicated.
Also, some time ago, gcc renamed its configure.in files to configure.ac.
Fixed a few remaining references to gcc configure.in files, such as in
error messages and documentation.
See PR gcc/other/66259 and binutils-gdb/binutils/18450.
Index: ChangeLog
===================================================================
--- ChangeLog (revision 223630)
+++ ChangeLog (working copy)
@@ -1,3 +1,10 @@
+2015-05-24 Michael Darling <darlingm@gmail.com>
+
+ PR other/66259
+ * config-ml.in: Reflects renaming of configure.in to configure.ac
+ * configure: Reflects renaming of configure.in to configure.ac
+ * configure.ac: Reflects renaming of configure.in to configure.ac
+
2015-05-16 James Bowman <james.bowman@ftdichip.com>
* configure.ac: FT32 target added.
Index: boehm-gc/ChangeLog
===================================================================
--- boehm-gc/ChangeLog (revision 223630)
+++ boehm-gc/ChangeLog (working copy)
@@ -1,3 +1,11 @@
+2015-05-24 Michael Darling <darlingm@gmail.com>
+
+ PR other/66259
+ * Makefile.direct: Reflects renaming of configure.in to configure.ac
+ * Makefile.dist: Reflects renaming of configure.in to configure.ac
+ * version.h: Reflects renaming of configure.in to configure.ac
+ * doc/README: Reflects renaming of configure.in to configure.ac
+
2015-05-13 Michael Haubenwallner <michael.haubenwallner@ssi-schaefer.com>
* Makefile.in: Regenerated with automake-1.11.6.
Index: boehm-gc/Makefile.direct
===================================================================
--- boehm-gc/Makefile.direct (revision 223630)
+++ boehm-gc/Makefile.direct (working copy)
@@ -331,7 +331,7 @@ DOC_FILES= README.QUICK doc/README.Mac doc/README.
TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \
tests/leak_test.c tests/thread_leak_test.c tests/middle.c
-GNU_BUILD_FILES= configure.in Makefile.am configure acinclude.m4 \
+GNU_BUILD_FILES= configure.ac Makefile.am configure acinclude.m4 \
libtool.m4 install-sh configure.host Makefile.in \
aclocal.m4 config.sub config.guess \
include/Makefile.am include/Makefile.in \
Index: boehm-gc/Makefile.dist
===================================================================
--- boehm-gc/Makefile.dist (revision 223630)
+++ boehm-gc/Makefile.dist (working copy)
@@ -326,7 +326,7 @@ DOC_FILES= README.QUICK doc/README.Mac doc/README.
TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \
tests/leak_test.c tests/thread_leak_test.c tests/middle.c
-GNU_BUILD_FILES= configure.in Makefile.am configure acinclude.m4 \
+GNU_BUILD_FILES= configure.ac Makefile.am configure acinclude.m4 \
libtool.m4 install-sh configure.host Makefile.in \
aclocal.m4 config.sub config.guess \
include/Makefile.am include/Makefile.in \
Index: boehm-gc/doc/README
===================================================================
--- boehm-gc/doc/README (revision 223630)
+++ boehm-gc/doc/README (working copy)
@@ -6,7 +6,7 @@ Copyright (c) 1999-2004 Hewlett-Packard Developmen
The file linux_threads.c is also
Copyright (c) 1998 by Fergus Henderson. All rights reserved.
-The files Makefile.am, and configure.in are
+The files Makefile.am, and configure.ac are
Copyright (c) 2001 by Red Hat Inc. All rights reserved.
Several files supporting GNU-style builds are copyrighted by the Free
Index: boehm-gc/version.h
===================================================================
--- boehm-gc/version.h (revision 223630)
+++ boehm-gc/version.h (working copy)
@@ -1,4 +1,4 @@
-/* The version here should match that in configure/configure.in */
+/* The version here should match that in configure/configure.ac */
/* Eventually this one may become unnecessary. For now we need */
/* it to keep the old-style build process working. */
#define GC_TMP_VERSION_MAJOR 6
@@ -14,7 +14,7 @@
GC_TMP_VERSION_MINOR != GC_VERSION_MINOR || \
defined(GC_ALPHA_VERSION) != (GC_TMP_ALPHA_VERSION != GC_NOT_ALPHA) || \
defined(GC_ALPHA_VERSION) && GC_TMP_ALPHA_VERSION != GC_ALPHA_VERSION
-# error Inconsistent version info. Check README, version.h, and
configure.in.
+# error Inconsistent version info. Check README, version.h, and
configure.ac.
# endif
#else
# define GC_VERSION_MAJOR GC_TMP_VERSION_MAJOR
Index: config/ChangeLog
===================================================================
--- config/ChangeLog (revision 223630)
+++ config/ChangeLog (working copy)
@@ -1,3 +1,11 @@
+2015-05-24 Michael Darling <darlingm@gmail.com>
+
+ PR other/66259
+ * gettext.m4: Reflects renaming of configure.in to configure.ac
+ * po.m4: Reflects renaming of configure.in to configure.ac
+ * stdint.m4: Reflects renaming of configure.in to configure.ac
+ * tcl.m4: Reflects renaming of configure.in to configure.ac
+
2015-05-13 Eric Botcazou <ebotcazou@adacore.com>
* sjlj.m4: New file.
Index: config/gettext.m4
===================================================================
--- config/gettext.m4 (revision 223630)
+++ config/gettext.m4 (working copy)
@@ -81,7 +81,7 @@ AC_DEFUN([AM_GNU_GETTEXT],
dnl Ideally we would do this search only after the
dnl if test "$USE_NLS" = "yes"; then
dnl if test "$gt_cv_func_gnugettext_libc" != "yes"; then
- dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
+ dnl tests. But if configure.ac invokes AM_ICONV after AM_GNU_GETTEXT
dnl the configure script would need to contain the same shell code
dnl again, outside any 'if'. There are two solutions:
dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
@@ -303,7 +303,7 @@ return (int) gettext ("")]ifelse([$2], [need-ngett
AC_SUBST(USE_INCLUDED_LIBINTL)
AC_SUBST(CATOBJEXT)
- dnl For backward compatibility. Some configure.ins may be using this.
+ dnl For backward compatibility. Some configure.acs may be using this.
nls_cv_header_intl=
nls_cv_header_libgt=
Index: config/po.m4
===================================================================
--- config/po.m4 (revision 223630)
+++ config/po.m4 (working copy)
@@ -117,7 +117,7 @@ AC_DEFUN([AM_PO_SUBDIRS],
if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
# The LINGUAS file contains the set of available languages.
if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS
in configure.in is obsolete" || echo "setting ALL_LINGUAS in
configure.in is obsolete"
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS
in configure.ac is obsolete" || echo "setting ALL_LINGUAS in
configure.ac is obsolete"
fi
ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"`
# Hide the ALL_LINGUAS assigment from automake.
@@ -124,7 +124,7 @@ AC_DEFUN([AM_PO_SUBDIRS],
eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
else
- # The set of available languages was given in configure.in.
+ # The set of available languages was given in configure.ac.
eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
fi
case "$ac_given_srcdir" in
Index: config/stdint.m4
===================================================================
--- config/stdint.m4 (revision 223630)
+++ config/stdint.m4 (working copy)
@@ -39,7 +39,7 @@ dnl If your installed header files require the std
dnl create an installable file mylib-int.h that all your other installable
dnl header may include. So, for a library package named "mylib", just use
dnl GCC_HEADER_STDINT(mylib-int.h)
-dnl in configure.in and install that header file in Makefile.am along with
+dnl in configure.ac and install that header file in Makefile.am along with
dnl the other headers (mylib.h). The mylib-specific headers can simply
dnl use "#include <mylib-int.h>" to obtain the stdint-types.
dnl
Index: config/tcl.m4
===================================================================
--- config/tcl.m4 (revision 223630)
+++ config/tcl.m4 (working copy)
@@ -2136,7 +2136,7 @@ dnl # preprocessing tests use only CPPFLAGS.
INSTALL_LIB='$(INSTALL_LIBRARY) $(LIB_FILE)
$(LIB_INSTALL_DIR)/$(LIB_FILE) ; (cd $(LIB_INSTALL_DIR) ; $(RANLIB)
$(LIB_FILE))'
fi
-dnl Not at all clear what this was doing in Tcl's configure.in
+dnl Not at all clear what this was doing in Tcl's configure.ac
dnl or why it was needed was needed. In any event, this sort of
dnl things needs to be done in the big loop above.
dnl REMOVE THIS BLOCK LATER! (mdejong)
@@ -3235,7 +3235,7 @@ AC_DEFUN([SC_TCL_GETGRNAM_R], [AC_CHECK_FUNC(getgr
# created. Accumulates.
#
# Requires presence of SC_OUTPUT_COMMANDS_PRE at the end
-# of configure.in (right before AC_OUTPUT).
+# of configure.ac (right before AC_OUTPUT).
#
#--------------------------------------------------------------------
Index: config-ml.in
===================================================================
--- config-ml.in (revision 223630)
+++ config-ml.in (working copy)
@@ -31,7 +31,7 @@
# user select which libraries s/he really wants.
#
# Subdirectories wishing to use multilib should put the following lines
-# in the "post-target" section of configure.in.
+# in the "post-target" section of configure.ac.
#
# if [ "${srcdir}" = "." ] ; then
# if [ "${with_target_subdir}" != "." ] ; then
@@ -182,8 +182,8 @@ if [ "${enable_multilib}" = yes ]; then
# ${with_multisubdir} tells us we're in the right branch, but we could be
# in a subdir of that.
# ??? The previous version could void this test by separating the process into
-# two files: one that only the library's toplevel configure.in ran (to
-# configure the multilib subdirs), and another that all configure.in's ran to
+# two files: one that only the library's toplevel configure.ac ran (to
+# configure the multilib subdirs), and another that all configure.ac's ran to
# update the Makefile. It seemed reasonable to collapse all multilib support
# into one file, but it does leave us with having to perform this test.
ml_toplevel_p=no
Index: configure
===================================================================
--- configure (revision 223630)
+++ configure (working copy)
@@ -6152,7 +6152,7 @@ if test -d ${srcdir}/gcc; then
if test x"${enable_languages+set}" != xset; then
if test x"${LANGUAGES+set}" = xset; then
enable_languages="${LANGUAGES}"
- echo configure.in: warning: setting LANGUAGES is deprecated,
use --enable-languages instead 1>&2
+ echo configure.ac: warning: setting LANGUAGES is deprecated,
use --enable-languages instead 1>&2
else
enable_languages=all
fi
@@ -6160,7 +6160,7 @@ if test -d ${srcdir}/gcc; then
if test x"${enable_languages}" = x ||
test x"${enable_languages}" = xyes;
then
- echo configure.in: --enable-languages needs at least one
language argument 1>&2
+ echo configure.ac: --enable-languages needs at least one
language argument 1>&2
exit 1
fi
fi
@@ -6170,7 +6170,7 @@ if test -d ${srcdir}/gcc; then
# and make the substitution.
case ,${enable_languages}, in
*,f95,*)
- echo configure.in: warning: 'f95' as language name is
deprecated, use 'fortran' instead 1>&2
+ echo configure.ac: warning: 'f95' as language name is
deprecated, use 'fortran' instead 1>&2
enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
;;
esac
@@ -6774,7 +6774,7 @@ fi
# have requested that this magic not happen.
#
# The command line options always override the explicit settings in
-# configure.in, and the settings in configure.in override this magic.
+# configure.ac, and the settings in configure.ac override this magic.
#
# If the default for a toolchain is to use GNU as and ld, and you don't
# want to do that, then you should use the --without-gnu-as and
Index: configure.ac
===================================================================
--- configure.ac (revision 223630)
+++ configure.ac (working copy)
@@ -1849,7 +1849,7 @@ if test -d ${srcdir}/gcc; then
if test x"${enable_languages+set}" != xset; then
if test x"${LANGUAGES+set}" = xset; then
enable_languages="${LANGUAGES}"
- echo configure.in: warning: setting LANGUAGES is deprecated,
use --enable-languages instead 1>&2
+ echo configure.ac: warning: setting LANGUAGES is deprecated,
use --enable-languages instead 1>&2
else
enable_languages=all
fi
@@ -1857,7 +1857,7 @@ if test -d ${srcdir}/gcc; then
if test x"${enable_languages}" = x ||
test x"${enable_languages}" = xyes;
then
- echo configure.in: --enable-languages needs at least one
language argument 1>&2
+ echo configure.ac: --enable-languages needs at least one
language argument 1>&2
exit 1
fi
fi
@@ -1867,7 +1867,7 @@ if test -d ${srcdir}/gcc; then
# and make the substitution.
case ,${enable_languages}, in
*,f95,*)
- echo configure.in: warning: 'f95' as language name is
deprecated, use 'fortran' instead 1>&2
+ echo configure.ac: warning: 'f95' as language name is
deprecated, use 'fortran' instead 1>&2
enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
;;
esac
@@ -2420,7 +2420,7 @@ fi
# have requested that this magic not happen.
#
# The command line options always override the explicit settings in
-# configure.in, and the settings in configure.in override this magic.
+# configure.ac, and the settings in configure.ac override this magic.
#
# If the default for a toolchain is to use GNU as and ld, and you don't
# want to do that, then you should use the --without-gnu-as and
Index: gcc/ChangeLog
===================================================================
--- gcc/ChangeLog (revision 223630)
+++ gcc/ChangeLog (working copy)
@@ -1,3 +1,13 @@
+2015-05-24 Michael Darling <darlingm@gmail.com>
+
+ PR other/66259
+ * acinclude.m4: Reflects renaming of configure.in to configure.ac
+ * configure: Reflects renaming of configure.in to configure.ac
+ * configure.ac: Reflects renaming of configure.in to configure.ac
+ * doc/install.texi: Reflects renaming of configure.in to configure.ac
+ * doc/tm.texi: Reflects renaming of configure.in to configure.ac
+ * doc/tm.texi.in: Reflects renaming of configure.in to configure.ac
+
2015-05-22 Jan Hubicka <hubicka@ucw.cz>
* ipa-utils.h (method_class_type): Remove.
Index: gcc/acinclude.m4
===================================================================
--- gcc/acinclude.m4 (revision 223630)
+++ gcc/acinclude.m4 (working copy)
@@ -390,7 +390,7 @@ AC_DEFUN([_gcc_COMPUTE_GAS_VERSION],
[gcc_cv_as_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
for f in $gcc_cv_as_bfd_srcdir/configure \
$gcc_cv_as_gas_srcdir/configure \
- $gcc_cv_as_gas_srcdir/configure.in \
+ $gcc_cv_as_gas_srcdir/configure.ac \
$gcc_cv_as_gas_srcdir/Makefile.in ; do
gcc_cv_gas_version=`sed -n -e 's/^[[
]]*VERSION=[[^0-9A-Za-z_]]*\([[0-9]]*\.[[0-9]]*.*\)/VERSION=\1/p' <
$f`
if test x$gcc_cv_gas_version != x; then
Index: gcc/ada/ChangeLog
===================================================================
--- gcc/ada/ChangeLog (revision 223630)
+++ gcc/ada/ChangeLog (working copy)
@@ -1,3 +1,9 @@
+2015-05-24 Michael Darling <darlingm@gmail.com>
+
+ PR other/66259
+ * prj-nmsc.adb: Reflects renaming of configure.in to configure.ac
+ * gcc-interface/Makefile.in: Reflects renaming of configure.in to configure.ac
+
2015-05-22 Ed Schonberg <schonberg@adacore.com>
* sem_ch3.adb (Constrain_Concurrent): If the context is a
Index: gcc/ada/gcc-interface/Makefile.in
===================================================================
--- gcc/ada/gcc-interface/Makefile.in (revision 223630)
+++ gcc/ada/gcc-interface/Makefile.in (working copy)
@@ -148,7 +148,7 @@ GCC_CFLAGS = $(INTERNAL_CFLAGS) $(T_CFLAGS) $(CFLA
# We don't use cross-make. Instead we use the tools from the build tree,
# if they are available.
-# program_transform_name and objdir are set by configure.in.
+# program_transform_name and objdir are set by configure.ac.
program_transform_name =
objdir = .
Index: gcc/ada/prj-nmsc.adb
===================================================================
--- gcc/ada/prj-nmsc.adb (revision 223630)
+++ gcc/ada/prj-nmsc.adb (working copy)
@@ -580,7 +580,7 @@ package body Prj.Nmsc is
Canonical_Case_File_Name (Suf);
-- The file name must end with the suffix (which is not an extension)
- -- For instance a suffix "configure.in" must match a file with the
+ -- For instance a suffix "configure.ac" must match a file with the
-- same name. To avoid dummy cases, though, a suffix starting with
-- '.' requires a file that is at least one character longer ('.cpp'
-- should not match a file with the same name).
Index: gcc/configure
===================================================================
--- gcc/configure (revision 223630)
+++ gcc/configure (working copy)
@@ -21539,7 +21539,7 @@ else
if test -x "$DEFAULT_ASSEMBLER"; then
gcc_cv_as="$DEFAULT_ASSEMBLER"
-elif test -f $gcc_cv_as_gas_srcdir/configure.in \
+elif test -f $gcc_cv_as_gas_srcdir/configure.ac \
&& test -f ../gas/Makefile \
&& test x$build = x$host; then
gcc_cv_as=../gas/as-new$build_exeext
@@ -21612,7 +21612,7 @@ $as_echo "newly built gas" >&6; }
gcc_cv_as_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
for f in $gcc_cv_as_bfd_srcdir/configure \
$gcc_cv_as_gas_srcdir/configure \
- $gcc_cv_as_gas_srcdir/configure.in \
+ $gcc_cv_as_gas_srcdir/configure.ac \
$gcc_cv_as_gas_srcdir/Makefile.in ; do
gcc_cv_gas_version=`sed -n -e 's/^[
]*VERSION=[^0-9A-Za-z_]*\([0-9]*\.[0-9]*.*\)/VERSION=\1/p' < $f`
if test x$gcc_cv_gas_version != x; then
@@ -21702,7 +21702,7 @@ elif test $install_gold_as_default = yes \
&& test -f ../gold/Makefile \
&& test x$build = x$host; then
gcc_cv_ld=../gold/ld-new$build_exeext
-elif test -f $gcc_cv_ld_gld_srcdir/configure.in \
+elif test -f $gcc_cv_ld_gld_srcdir/configure.ac \
&& test -f ../ld/Makefile \
&& test x$build = x$host; then
gcc_cv_ld=../ld/ld-new$build_exeext
@@ -21818,7 +21818,7 @@ $as_echo "newly built ld" >&6; }
elif test "$ld_is_gold" = yes; then
in_tree_ld_is_elf=yes
fi
- for f in $gcc_cv_ld_bfd_srcdir/configure
$gcc_cv_ld_gld_srcdir/configure $gcc_cv_ld_gld_srcdir/configure.in
$gcc_cv_ld_gld_srcdir/Makefile.in
+ for f in $gcc_cv_ld_bfd_srcdir/configure
$gcc_cv_ld_gld_srcdir/configure $gcc_cv_ld_gld_srcdir/configure.ac
$gcc_cv_ld_gld_srcdir/Makefile.in
do
gcc_cv_gld_version=`sed -n -e 's/^[
]*VERSION=[^0-9A-Za-z_]*\([0-9]*\.[0-9]*.*\)/VERSION=\1/p' < $f`
if test x$gcc_cv_gld_version != x; then
@@ -21851,7 +21851,7 @@ if test "${gcc_cv_nm+set}" = set; then :
else
-if test -f $gcc_cv_binutils_srcdir/configure.in \
+if test -f $gcc_cv_binutils_srcdir/configure.ac \
&& test -f ../binutils/Makefile \
&& test x$build = x$host; then
gcc_cv_nm=../binutils/nm-new$build_exeext
@@ -21930,7 +21930,7 @@ if test "${gcc_cv_objdump+set}" = set; then :
else
-if test -f $gcc_cv_binutils_srcdir/configure.in \
+if test -f $gcc_cv_binutils_srcdir/configure.ac \
&& test -f ../binutils/Makefile \
&& test x$build = x$host; then
# Single tree build which includes binutils.
@@ -22002,7 +22002,7 @@ if test "${gcc_cv_readelf+set}" = set; then :
else
-if test -f $gcc_cv_binutils_srcdir/configure.in \
+if test -f $gcc_cv_binutils_srcdir/configure.ac \
&& test -f ../binutils/Makefile \
&& test x$build = x$host; then
# Single tree build which includes binutils.
Index: gcc/configure.ac
===================================================================
--- gcc/configure.ac (revision 223630)
+++ gcc/configure.ac (working copy)
@@ -2092,7 +2092,7 @@ m4_pattern_allow([AS_FOR_TARGET])dnl
AS_VAR_SET_IF(gcc_cv_as,, [
if test -x "$DEFAULT_ASSEMBLER"; then
gcc_cv_as="$DEFAULT_ASSEMBLER"
-elif test -f $gcc_cv_as_gas_srcdir/configure.in \
+elif test -f $gcc_cv_as_gas_srcdir/configure.ac \
&& test -f ../gas/Makefile \
&& test x$build = x$host; then
gcc_cv_as=../gas/as-new$build_exeext
@@ -2181,7 +2181,7 @@ elif test $install_gold_as_default = yes \
&& test -f ../gold/Makefile \
&& test x$build = x$host; then
gcc_cv_ld=../gold/ld-new$build_exeext
-elif test -f $gcc_cv_ld_gld_srcdir/configure.in \
+elif test -f $gcc_cv_ld_gld_srcdir/configure.ac \
&& test -f ../ld/Makefile \
&& test x$build = x$host; then
gcc_cv_ld=../ld/ld-new$build_exeext
@@ -2245,7 +2245,7 @@ if test "$gcc_cv_ld" = ../ld/ld-new$build_exeext \
elif test "$ld_is_gold" = yes; then
in_tree_ld_is_elf=yes
fi
- for f in $gcc_cv_ld_bfd_srcdir/configure
$gcc_cv_ld_gld_srcdir/configure $gcc_cv_ld_gld_srcdir/configure.in
$gcc_cv_ld_gld_srcdir/Makefile.in
+ for f in $gcc_cv_ld_bfd_srcdir/configure
$gcc_cv_ld_gld_srcdir/configure $gcc_cv_ld_gld_srcdir/configure.ac
$gcc_cv_ld_gld_srcdir/Makefile.in
do
changequote(,)dnl
gcc_cv_gld_version=`sed -n -e 's/^[
]*VERSION=[^0-9A-Za-z_]*\([0-9]*\.[0-9]*.*\)/VERSION=\1/p' < $f`
@@ -2278,7 +2278,7 @@ AC_SUBST(ORIGINAL_LD_GOLD_FOR_TARGET)
# Figure out what nm we will be using.
gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
AS_VAR_SET_IF(gcc_cv_nm,, [
-if test -f $gcc_cv_binutils_srcdir/configure.in \
+if test -f $gcc_cv_binutils_srcdir/configure.ac \
&& test -f ../binutils/Makefile \
&& test x$build = x$host; then
gcc_cv_nm=../binutils/nm-new$build_exeext
@@ -2310,7 +2310,7 @@ esac
# Figure out what objdump we will be using.
AS_VAR_SET_IF(gcc_cv_objdump,, [
-if test -f $gcc_cv_binutils_srcdir/configure.in \
+if test -f $gcc_cv_binutils_srcdir/configure.ac \
&& test -f ../binutils/Makefile \
&& test x$build = x$host; then
# Single tree build which includes binutils.
@@ -2335,7 +2335,7 @@ fi
# Figure out what readelf we will be using.
AS_VAR_SET_IF(gcc_cv_readelf,, [
-if test -f $gcc_cv_binutils_srcdir/configure.in \
+if test -f $gcc_cv_binutils_srcdir/configure.ac \
&& test -f ../binutils/Makefile \
&& test x$build = x$host; then
# Single tree build which includes binutils.
Index: gcc/doc/install.texi
===================================================================
--- gcc/doc/install.texi (revision 223630)
+++ gcc/doc/install.texi (working copy)
@@ -2097,7 +2097,7 @@ machine. In general, if the Java front end is ena
libraries will be enabled too, unless they're known to not work on
the target platform. If GCJ is enabled but @samp{libgcj} isn't built, you
may need to port it; in this case, before modifying the top-level
-@file{configure.in} so that @samp{libgcj} is enabled by default on
this platform,
+@file{configure.ac} so that @samp{libgcj} is enabled by default on
this platform,
you may use @option{--enable-libgcj} to override the default.
@end table
Index: gcc/doc/tm.texi
===================================================================
--- gcc/doc/tm.texi (revision 223630)
+++ gcc/doc/tm.texi (working copy)
@@ -412,7 +412,7 @@ If defined, this macro is an additional prefix to
@code{STANDARD_EXEC_PREFIX}. @code{MD_EXEC_PREFIX} is not searched
when the compiler is built as a cross
compiler. If you define @code{MD_EXEC_PREFIX}, then be sure to add it
-to the list of directories used to find the assembler in @file{configure.in}.
+to the list of directories used to find the assembler in @file{configure.ac}.
@end defmac
@defmac STANDARD_STARTFILE_PREFIX
Index: gcc/doc/tm.texi.in
===================================================================
--- gcc/doc/tm.texi.in (revision 223630)
+++ gcc/doc/tm.texi.in (working copy)
@@ -410,7 +410,7 @@ If defined, this macro is an additional prefix to
@code{STANDARD_EXEC_PREFIX}. @code{MD_EXEC_PREFIX} is not searched
when the compiler is built as a cross
compiler. If you define @code{MD_EXEC_PREFIX}, then be sure to add it
-to the list of directories used to find the assembler in @file{configure.in}.
+to the list of directories used to find the assembler in @file{configure.ac}.
@end defmac
@defmac STANDARD_STARTFILE_PREFIX
Index: intl/ChangeLog
===================================================================
--- intl/ChangeLog (revision 223630)
+++ intl/ChangeLog (working copy)
@@ -1,3 +1,8 @@
+2015-05-24 Michael Darling <darlingm@gmail.com>
+
+ PR other/66259
+ * configure: Reflects renaming of configure.in to configure.ac
+
2015-05-13 Michael Haubenwallner <michael.haubenwallner@ssi-schaefer.com>
* aclocal.m4: Regenerated with automake-1.11.6.
Index: intl/configure
===================================================================
--- intl/configure (revision 223630)
+++ intl/configure (working copy)
@@ -7851,7 +7851,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6
if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
# The LINGUAS file contains the set of available languages.
if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS
in configure.in is obsolete" || echo "setting ALL_LINGUAS in
configure.in is obsolete"
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS
in configure.ac is obsolete" || echo "setting ALL_LINGUAS in
configure.ac is obsolete"
fi
ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"`
# Hide the ALL_LINGUAS assigment from automake.
@@ -7858,7 +7858,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6
eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
else
- # The set of available languages was given in configure.in.
+ # The set of available languages was given in configure.ac.
eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
fi
case "$ac_given_srcdir" in
Index: libjava/ChangeLog
===================================================================
--- libjava/ChangeLog (revision 223630)
+++ libjava/ChangeLog (working copy)
@@ -1,3 +1,8 @@
+2015-05-24 Michael Darling <darlingm@gmail.com>
+
+ PR other/66259
+ * configure: Reflects renaming of configure.in to configure.ac
+
2015-05-13 Eric Botcazou <ebotcazou@adacore.com>
* configure.ac: Include config/sjlj.m4.
Index: libjava/classpath/ChangeLog
===================================================================
--- libjava/classpath/ChangeLog (revision 223630)
+++ libjava/classpath/ChangeLog (working copy)
@@ -1,3 +1,12 @@
+2015-05-24 Michael Darling <darlingm@gmail.com>
+
+ PR other/66259
+ * INSTALL: Reflects renaming of configure.in to configure.ac
+ * ltconfig: Reflects renaming of configure.in to configure.ac
+ * m4/ac_prog_javac.m4: Reflects renaming of configure.in to configure.ac
+ * m4/ac_prog_javac_works.m4: Reflects renaming of configure.in to configure.ac
+ * resource/META-INF/mimetypes.default: Reflects renaming of
configure.in to configure.ac
+
2015-05-13 Michael Haubenwallner <michael.haubenwallner@ssi-schaefer.com>
* Makefile.in: Regenerated with automake-1.11.6.
Index: libjava/classpath/INSTALL
===================================================================
--- libjava/classpath/INSTALL (revision 223630)
+++ libjava/classpath/INSTALL (working copy)
@@ -43,10 +43,9 @@ be considered for the next release. If you are us
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
+ The file `configure.ac' is used to create `configure' by a program
+called `autoconf'. You need `configure.ac' if you want to change it or
+regenerate `configure' using a newer version of `autoconf'.
The simplest way to compile this package is:
Index: libjava/classpath/ltconfig
===================================================================
--- libjava/classpath/ltconfig (revision 223630)
+++ libjava/classpath/ltconfig (working copy)
@@ -1588,7 +1588,7 @@ fi
echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
-# configure.in, otherwise build static only libraries.
+# configure.ac, otherwise build static only libraries.
case $host_os in
cygwin* | mingw* | pw32* | os2*)
if test x$can_build_shared = xyes; then
Index: libjava/classpath/m4/ac_prog_javac.m4
===================================================================
--- libjava/classpath/m4/ac_prog_javac.m4 (revision 223630)
+++ libjava/classpath/m4/ac_prog_javac.m4 (working copy)
@@ -7,7 +7,7 @@ dnl ones.
dnl
dnl If you want to force a specific compiler:
dnl
-dnl - at the configure.in level, set JAVAC=yourcompiler before calling
+dnl - at the configure.ac level, set JAVAC=yourcompiler before calling
dnl AC_PROG_JAVAC
dnl
dnl - at the configure level, setenv JAVAC
@@ -25,7 +25,7 @@ dnl programs. It is VERY IMPORTANT that you downlo
dnl some macros depend on other. Unfortunately, the autoconf archive
dnl does not support the concept of set of macros, so I had to break it
dnl for submission. The general documentation, as well as the sample
-dnl configure.in, is included in the AC_PROG_JAVA macro.
+dnl configure.ac, is included in the AC_PROG_JAVA macro.
dnl
dnl @category Java
dnl @author Stephane Bortzmeyer <bortzmeyer@pasteur.fr>
Index: libjava/classpath/m4/ac_prog_javac_works.m4
===================================================================
--- libjava/classpath/m4/ac_prog_javac_works.m4 (revision 223630)
+++ libjava/classpath/m4/ac_prog_javac_works.m4 (working copy)
@@ -7,7 +7,7 @@ dnl programs. It is VERY IMPORTANT that you downlo
dnl some macros depend on other. Unfortunately, the autoconf archive
dnl does not support the concept of set of macros, so I had to break it
dnl for submission. The general documentation, as well as the sample
-dnl configure.in, is included in the AC_PROG_JAVA macro.
+dnl configure.ac, is included in the AC_PROG_JAVA macro.
dnl
dnl @category Java
dnl @author Stephane Bortzmeyer <bortzmeyer@pasteur.fr>
Index: libjava/classpath/resource/META-INF/mimetypes.default
===================================================================
--- libjava/classpath/resource/META-INF/mimetypes.default (revision 223630)
+++ libjava/classpath/resource/META-INF/mimetypes.default (working copy)
@@ -2,7 +2,7 @@
# A simple, old format, mime.types file
#
#
-# It would be cool to have this auto-generated by configure.in
+# It would be cool to have this auto-generated by configure.ac
# depending on some dependancy somehow
#
text/html html htm
Index: libjava/configure
===================================================================
--- libjava/configure (revision 223630)
+++ libjava/configure (working copy)
@@ -28309,7 +28309,7 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
ac_sub_configure=$ac_srcdir/configure.gnu
elif test -f "$ac_srcdir/configure"; then
ac_sub_configure=$ac_srcdir/configure
- elif test -f "$ac_srcdir/configure.in"; then
+ elif test -f "$ac_srcdir/configure.ac"; then
# This should be Cygnus configure.
ac_sub_configure=$ac_aux_dir/configure
else
Index: libobjc/ChangeLog
===================================================================
--- libobjc/ChangeLog (revision 223630)
+++ libobjc/ChangeLog (working copy)
@@ -1,3 +1,8 @@
+2015-05-24 Michael Darling <darlingm@gmail.com>
+
+ PR other/66259
+ * THREADS: Reflects renaming of configure.in to configure.ac
+
2015-05-13 Eric Botcazou <ebotcazou@adacore.com>
* configure.ac: Remove manual SJLJ check.
Index: libobjc/THREADS
===================================================================
--- libobjc/THREADS (revision 223630)
+++ libobjc/THREADS (working copy)
@@ -108,7 +108,7 @@ this thread backend is able to automatically switc
mode if the threading library is not linked in.
If you want to compile libobjc standalone, then you would need to modify
-the configure.in and makefiles for it and you need to import the
+the configure.ac and makefiles for it and you need to import the
gthread code from GCC.
******************************************************************************
Index: liboffloadmic/ChangeLog
===================================================================
--- liboffloadmic/ChangeLog (revision 223630)
+++ liboffloadmic/ChangeLog (working copy)
@@ -1,3 +1,8 @@
+2015-05-24 Michael Darling <darlingm@gmail.com>
+
+ PR other/66259
+ * configure: Reflects renaming of configure.in to configure.ac
+
2015-05-13 Michael Haubenwallner <michael.haubenwallner@ssi-schaefer.com>
* Makefile.in: Regenerated with automake-1.11.6.
Index: liboffloadmic/configure
===================================================================
--- liboffloadmic/configure (revision 223630)
+++ liboffloadmic/configure (working copy)
@@ -17076,7 +17076,7 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
ac_sub_configure=$ac_srcdir/configure.gnu
elif test -f "$ac_srcdir/configure"; then
ac_sub_configure=$ac_srcdir/configure
- elif test -f "$ac_srcdir/configure.in"; then
+ elif test -f "$ac_srcdir/configure.ac"; then
# This should be Cygnus configure.
ac_sub_configure=$ac_aux_dir/configure
else