This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
Re: Minimize downward code motion during reassociation
On Fri, Oct 19, 2012 at 12:36 AM, Easwaran Raman <eraman@google.com> wrote:
> Hi,
>
> During expression reassociation, statements are conservatively moved
> downwards to ensure that dependences are correctly satisfied after
> reassocation. This could lead to lengthening of live ranges. This
> patch moves statements only to the extent necessary. Bootstraps and no
> test regression on x86_64/linux. OK for trunk?
>
> Thanks,
> Easwaran
>
> 2012-10-18 Easwaran Raman <eraman@google.com>
> * tree-ssa-reassoc.c(assign_uids): New function.
> (assign_uids_in_relevant_bbs): Likewise.
> (ensure_ops_are_available): Likewise.
> (rewrite_expr_tree): Do not move statements beyond what is
> necessary. Remove call to swap_ops_for_binary_stmt...
> (reassociate_bb): ... and move it here.
>
>
>
> Index: gcc/tree-ssa-reassoc.c
> ===================================================================
> --- gcc/tree-ssa-reassoc.c (revision 192487)
> +++ gcc/tree-ssa-reassoc.c (working copy)
> @@ -2250,6 +2250,128 @@ swap_ops_for_binary_stmt (VEC(operand_entry_t, hea
> }
> }
>
> +/* Assign UIDs to statements in basic block BB. */
> +
> +static void
> +assign_uids (basic_block bb)
> +{
> + unsigned uid = 0;
> + gimple_stmt_iterator gsi;
> + /* First assign uids to phis. */
> + for (gsi = gsi_start_phis (bb); !gsi_end_p (gsi); gsi_next (&gsi))
> + {
> + gimple stmt = gsi_stmt (gsi);
> + gimple_set_uid (stmt, uid++);
> + }
> +
> + /* Then assign uids to stmts. */
> + for (gsi = gsi_start_bb (bb); !gsi_end_p (gsi); gsi_next (&gsi))
> + {
> + gimple stmt = gsi_stmt (gsi);
> + gimple_set_uid (stmt, uid++);
> + }
> +}
> +
> +/* For each operand in OPS, find the basic block that contains the statement
> + which defines the operand. For all such basic blocks, assign UIDs. */
> +
> +static void
> +assign_uids_in_relevant_bbs (VEC(operand_entry_t, heap) * ops)
> +{
> + operand_entry_t oe;
> + int i;
> + struct pointer_set_t *seen_bbs = pointer_set_create ();
> +
> + for (i = 0; VEC_iterate (operand_entry_t, ops, i, oe); i++)
> + {
> + gimple def_stmt;
> + basic_block bb;
> + if (TREE_CODE (oe->op) != SSA_NAME)
> + continue;
> + def_stmt = SSA_NAME_DEF_STMT (oe->op);
> + bb = gimple_bb (def_stmt);
> + if (!pointer_set_contains (seen_bbs, bb))
> + {
> + assign_uids (bb);
> + pointer_set_insert (seen_bbs, bb);
> + }
> + }
> + pointer_set_destroy (seen_bbs);
> +}
Please assign UIDs once using the existing renumber_gimple_stmt_uids ().
You seem to call the above multiple times and thus do work bigger than
O(number of basic blocks).
> +/* Ensure that operands in the OPS vector starting from OPINDEXth
> entry are live
> + at STMT. This is accomplished by moving STMT if needed. */
> +
> +static void
> +ensure_ops_are_available (gimple stmt, VEC(operand_entry_t, heap) *
> ops, int opindex)
> +{
> + int i;
> + int len = VEC_length (operand_entry_t, ops);
> + gimple insert_stmt = stmt;
> + basic_block insert_bb = gimple_bb (stmt);
> + gimple_stmt_iterator gsi_insert, gsistmt;
> + for (i = opindex; i < len; i++)
> + {
Likewise you call this for each call to rewrite_expr_tree, so it seems to me
this is quadratic in the number of ops in the op vector.
Why make this all so complicated? It seems to me that we should
fixup stmt order only after the whole ops vector has been materialized.
> + operand_entry_t oe = VEC_index (operand_entry_t, ops, i);
> + gimple def_stmt;
> + basic_block def_bb;
> + /* Ignore constants and operands with default definitons. */
> + if (TREE_CODE (oe->op) != SSA_NAME
> + || SSA_NAME_IS_DEFAULT_DEF (oe->op))
> + continue;
> + def_stmt = SSA_NAME_DEF_STMT (oe->op);
> + def_bb = gimple_bb (def_stmt);
> + if (def_bb != insert_bb
> + && !dominated_by_p (CDI_DOMINATORS, insert_bb, def_bb))
> + {
> + insert_bb = def_bb;
> + insert_stmt = def_stmt;
> + }
> + else if (def_bb == insert_bb
> + && gimple_uid (insert_stmt) < gimple_uid (def_stmt))
> + insert_stmt = def_stmt;
> + }
> + if (insert_stmt == stmt)
> + return;
> + gsistmt = gsi_for_stmt (stmt);
> + /* If GSI_STMT is a phi node, then do not insert just after that statement.
> + Instead, find the first non-label gimple statement in BB and insert before
> + that. */
> + if (gimple_code (insert_stmt) == GIMPLE_PHI)
> + {
> + gsi_insert = gsi_after_labels (insert_bb);
> + gsi_move_before (&gsistmt, &gsi_insert);
> + }
> + /* Statements marked for throw can not be in the middle of a basic block. So
> + we can not insert a statement (not marked for throw) immediately
> after. */
> + else if (lookup_stmt_eh_lp (insert_stmt) > 0
that's already performed by stmt_can_throw_internal
> + && stmt_can_throw_internal (insert_stmt))
But all this should be a non-issue as re-assoc should never assign an ops
vector entry for such stmts (but it could have leafs defined by such stmts).
If you only ever move definitions down, like the present code does caring
about leafs should not be necessary.
Richard.
> + {
> + edge e, succ_edge = NULL;
> + edge_iterator ei;
> +
> + /* There should be exactly one normal edge out of the basic block. */
> + FOR_EACH_EDGE (e, ei, insert_bb->succs)
> + {
> + if (!(e->flags & EDGE_COMPLEX))
> + {
> + gcc_assert (succ_edge == NULL);
> + succ_edge = e;
> + }
> + }
> + /* Insert STMT at the beginning of the successor basic block. */
> + insert_bb = succ_edge->dest;
> + gsi_insert = gsi_after_labels (insert_bb);
> + gsi_move_before (&gsistmt, &gsi_insert);
> + }
> + else
> + {
> + gsi_insert = gsi_for_stmt (insert_stmt);
> + gsi_move_after (&gsistmt, &gsi_insert);
> + }
> +
> +}
> +
> /* Recursively rewrite our linearized statements so that the operators
> match those in OPS[OPINDEX], putting the computation in rank
> order. */
> @@ -2262,11 +2384,6 @@ rewrite_expr_tree (gimple stmt, unsigned int opind
> tree rhs2 = gimple_assign_rhs2 (stmt);
> operand_entry_t oe;
>
> - /* If we have three operands left, then we want to make sure the ones
> - that get the double binary op are chosen wisely. */
> - if (opindex + 3 == VEC_length (operand_entry_t, ops))
> - swap_ops_for_binary_stmt (ops, opindex, stmt);
> -
> /* The final recursion case for this function is that you have
> exactly two operations left.
> If we had one exactly one op in the entire list to start with, we
> @@ -2312,19 +2429,17 @@ rewrite_expr_tree (gimple stmt, unsigned int opind
> {
> if (!moved)
> {
> - gimple_stmt_iterator gsinow, gsirhs1;
> - gimple stmt1 = stmt, stmt2;
> - unsigned int count;
> + gimple stmt1 = stmt;
> + unsigned int count, i = 1;
>
> - gsinow = gsi_for_stmt (stmt);
> count = VEC_length (operand_entry_t, ops) - opindex - 2;
> - while (count-- != 0)
> + while (i <= count)
> {
> - stmt2 = SSA_NAME_DEF_STMT (gimple_assign_rhs1 (stmt1));
> - gsirhs1 = gsi_for_stmt (stmt2);
> - gsi_move_before (&gsirhs1, &gsinow);
> - gsi_prev (&gsinow);
> - stmt1 = stmt2;
> + stmt1 = SSA_NAME_DEF_STMT (gimple_assign_rhs1 (stmt1));
> + /* Ensure that STMT1 is moved to a place where all operands in
> + OPS[opindex + i...] are available. */
> + ensure_ops_are_available (stmt1, ops, opindex + i);
> + i++;
> }
> moved = true;
> }
> @@ -3542,8 +3657,18 @@ reassociate_bb (basic_block bb)
> && VEC_length (operand_entry_t, ops) > 3)
> rewrite_expr_tree_parallel (stmt, width, ops);
> else
> - rewrite_expr_tree (stmt, 0, ops, false);
> + {
> + /* When there are three operands left, we want
> + to make sure the ones that get the double
> + binary op are chosen wisely. */
> + int len = VEC_length (operand_entry_t, ops);
> + if (len >= 3)
> + swap_ops_for_binary_stmt (ops, len - 3, stmt);
>
> + assign_uids_in_relevant_bbs (ops);
> + rewrite_expr_tree (stmt, 0, ops, false);
> + }
> +
> /* If we combined some repeated factors into a
> __builtin_powi call, multiply that result by the
> reassociated operands. */